203 files changed, 7191 insertions, 1162 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 1c4119c60040..1ae18d879e12 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -702,6 +702,16 @@ config ARCH_BCMRING
        help
          Support for Broadcom's BCMRing platform.
+config ARCH_U8500
+        bool "ST-Ericsson U8500 Series"
+        select CPU_V7
+        select ARM_AMBA
+        select GENERIC_TIME
+        select GENERIC_CLOCKEVENTS
+        select COMMON_CLKDEV
+        help
+          Support for ST-Ericsson's Ux500 architecture
 endchoice
 source "arch/arm/mach-clps711x/Kconfig"
@@ -787,6 +797,7 @@ source "arch/arm/mach-at91/Kconfig"
 source "arch/arm/plat-mxc/Kconfig"
 source "arch/arm/mach-nomadik/Kconfig"
+source "arch/arm/plat-nomadik/Kconfig"
 source "arch/arm/mach-netx/Kconfig"
@@ -804,6 +815,8 @@ source "arch/arm/mach-w90x900/Kconfig"
 source "arch/arm/mach-bcmring/Kconfig"
+source "arch/arm/mach-ux500/Kconfig"
 # Definitions to make life easier
 config ARCH_ACORN
        bool
@@ -955,10 +968,10 @@ source "kernel/time/Kconfig"
 config SMP
        bool "Symmetric Multi-Processing (EXPERIMENTAL)"
        depends on EXPERIMENTAL && (REALVIEW_EB_ARM11MP || REALVIEW_EB_A9MP ||\
-                 MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4)
+                 MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4 || ARCH_U8500)
        depends on GENERIC_CLOCKEVENTS
        select USE_GENERIC_SMP_HELPERS
-        select HAVE_ARM_SCU if (ARCH_REALVIEW || ARCH_OMAP4)
+        select HAVE_ARM_SCU if (ARCH_REALVIEW || ARCH_OMAP4 || ARCH_U8500)
        help
          This enables support for systems with more than one CPU. If you have
          a system with only one CPU, like most personal computers, say N. If
@@ -1027,9 +1040,9 @@ config HOTPLUG_CPU
 config LOCAL_TIMERS
        bool "Use local timer interrupts"
        depends on SMP && (REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || \
-                REALVIEW_EB_A9MP || MACH_REALVIEW_PBX || ARCH_OMAP4)
+                REALVIEW_EB_A9MP || MACH_REALVIEW_PBX || ARCH_OMAP4 || ARCH_U8500)
        default y
-        select HAVE_ARM_TWD if (ARCH_REALVIEW || ARCH_OMAP4)
+        select HAVE_ARM_TWD if (ARCH_REALVIEW || ARCH_OMAP4 || ARCH_U8500)
        help
          Enable support for local timers on SMP platforms, rather then the
          legacy IPI broadcast method.  Local timers allows the system
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 1a6f70e52921..ff54c23d085e 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -83,6 +83,14 @@ config DEBUG_ICEDCC
          It does include a timeout to ensure that the system does not
          totally freeze when there is nothing connected to read.
+config OC_ETM
+        bool "On-chip ETM and ETB"
+        select ARM_AMBA
+        help
+          Enables the on-chip embedded trace macrocell and embedded trace
+          buffer driver that will allow you to collect traces of the
+          kernel code.
 config DEBUG_DC21285_PORT
        bool "Kernel low-level debugging messages via footbridge serial port"
        depends on DEBUG_LL && FOOTBRIDGE
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index a73caaf66763..7603eba7c0cd 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -166,6 +166,7 @@ machine-$(CONFIG_ARCH_SHARK)		:= shark
 machine-$(CONFIG_ARCH_STMP378X)         := stmp378x
 machine-$(CONFIG_ARCH_STMP37XX)         := stmp37xx
 machine-$(CONFIG_ARCH_U300)             := u300
+machine-$(CONFIG_ARCH_U8500)            := ux500
 machine-$(CONFIG_ARCH_VERSATILE)        := versatile
 machine-$(CONFIG_ARCH_W90X900)          := w90x900
 machine-$(CONFIG_FOOTBRIDGE)            := footbridge
@@ -176,6 +177,7 @@ machine-$(CONFIG_ARCH_MXC91231)		:= mxc91231
 plat-$(CONFIG_ARCH_MXC)         := mxc
 plat-$(CONFIG_ARCH_OMAP)        := omap
 plat-$(CONFIG_PLAT_IOP)         := iop
+plat-$(CONFIG_PLAT_NOMADIK)     := nomadik
 plat-$(CONFIG_PLAT_ORION)       := orion
 plat-$(CONFIG_PLAT_PXA)         := pxa
 plat-$(CONFIG_PLAT_S3C24XX)     := s3c24xx s3c
diff --git a/arch/arm/common/dmabounce.c b/arch/arm/common/dmabounce.c
index 734ac9135998..5a375e5fef21 100644
--- a/arch/arm/common/dmabounce.c
+++ b/arch/arm/common/dmabounce.c
@@ -342,6 +342,22 @@ dma_addr_t dma_map_single(struct device *dev, void *ptr, size_t size,
 }
 EXPORT_SYMBOL(dma_map_single);
+/*
+ * see if a mapped address was really a "safe" buffer and if so, copy
+ * the data from the safe buffer back to the unsafe buffer and free up
+ * the safe buffer.  (basically return things back to the way they
+ * should be)
+ */
+void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
+                enum dma_data_direction dir)
+{
+        dev_dbg(dev, "%s(ptr=%p,size=%d,dir=%x)\n",
+                __func__, (void *) dma_addr, size, dir);
+        unmap_single(dev, dma_addr, size, dir);
+}
+EXPORT_SYMBOL(dma_unmap_single);
 dma_addr_t dma_map_page(struct device *dev, struct page *page,
                unsigned long offset, size_t size, enum dma_data_direction dir)
 {
@@ -366,8 +382,7 @@ EXPORT_SYMBOL(dma_map_page);
 * the safe buffer.  (basically return things back to the way they
 * should be)
 */
+void dma_unmap_page(struct device *dev, dma_addr_t dma_addr, size_t size,
-void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
                enum dma_data_direction dir)
 {
        dev_dbg(dev, "%s(ptr=%p,size=%d,dir=%x)\n",
@@ -375,7 +390,7 @@ void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
        unmap_single(dev, dma_addr, size, dir);
 }
-EXPORT_SYMBOL(dma_unmap_single);
+EXPORT_SYMBOL(dma_unmap_page);
 int dmabounce_sync_for_cpu(struct device *dev, dma_addr_t addr,
                unsigned long off, size_t sz, enum dma_data_direction dir)
diff --git a/arch/arm/configs/ams_delta_defconfig b/arch/arm/configs/ams_delta_defconfig
index 764732529ea3..e8f7380b67d6 100644
--- a/arch/arm/configs/ams_delta_defconfig
+++ b/arch/arm/configs/ams_delta_defconfig
@@ -55,10 +55,10 @@ CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
+CONFIG_EMBEDDED=y
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS is not set
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
@@ -224,7 +224,7 @@ CONFIG_CPU_CP15_MMU=y
 #
 # Processor Features
 #
-# CONFIG_ARM_THUMB is not set
+CONFIG_ARM_THUMB=y
 # CONFIG_CPU_ICACHE_DISABLE is not set
 # CONFIG_CPU_DCACHE_DISABLE is not set
 CONFIG_CPU_DCACHE_WRITETHROUGH=y
@@ -248,7 +248,7 @@ CONFIG_CPU_DCACHE_WRITETHROUGH=y
 # CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_PREEMPT=y
 CONFIG_HZ=100
-# CONFIG_AEABI is not set
+CONFIG_AEABI=y
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
@@ -299,7 +299,9 @@ CONFIG_BINFMT_ELF=y
 #
 # Power management options
 #
-# CONFIG_PM is not set
+CONFIG_PM=y
+# CONFIG_SUSPEND is not set
+CONFIG_PM_RUNTIME=y
 #
 # Networking
@@ -670,7 +672,7 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
 # CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
+CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_EVBUG is not set
 #
@@ -784,6 +786,7 @@ CONFIG_I2C_OMAP=y
 #
 # CONFIG_SPI is not set
 # CONFIG_SPI_MASTER is not set
+CONFIG_GPIO_SYSFS=y
 #
 # Dallas's 1-wire bus
@@ -820,6 +823,7 @@ CONFIG_LEDS_AMS_DELTA=y
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
 #
 # Multimedia devices
@@ -896,7 +900,13 @@ CONFIG_LOGO_LINUX_CLUT224=y
 #
 # Sound
 #
-# CONFIG_SOUND is not set
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_SOC=y
+CONFIG_SND_OMAP_SOC=y
+CONFIG_SND_OMAP_SOC_AMS_DELTA=y
 #
 # HID Devices
diff --git a/arch/arm/configs/kirkwood_defconfig b/arch/arm/configs/kirkwood_defconfig
index af74cc2de8b6..bcfade33bca9 100644
--- a/arch/arm/configs/kirkwood_defconfig
+++ b/arch/arm/configs/kirkwood_defconfig
@@ -1,15 +1,13 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc4
+# Linux kernel version: 2.6.32-rc6
-# Mon May  4 11:58:57 2009
+# Sat Nov  7 20:31:18 2009
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -18,13 +16,12 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_HARDIRQS_SW_RESEND=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 #
 # General setup
@@ -46,11 +43,12 @@ CONFIG_SYSVIPC_SYSCTL=y
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
+CONFIG_TREE_RCU=y
-# CONFIG_TREE_RCU is not set
+# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=19
 # CONFIG_GROUP_SCHED is not set
@@ -73,7 +71,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -86,6 +83,10 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+#
+# Kernel Performance Events And Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
@@ -95,13 +96,17 @@ CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
 CONFIG_TRACEPOINTS=y
-# CONFIG_MARKERS is not set
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
 CONFIG_KRETPROBES=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -114,7 +119,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
@@ -135,19 +140,22 @@ CONFIG_DEFAULT_IOSCHED="cfq"
 #
 # System Type
 #
+CONFIG_MMU=y
 # CONFIG_ARCH_AAEC2000 is not set
 # CONFIG_ARCH_INTEGRATOR is not set
 # CONFIG_ARCH_REALVIEW is not set
 # CONFIG_ARCH_VERSATILE is not set
 # CONFIG_ARCH_AT91 is not set
 # CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_EBSA110 is not set
 # CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_NOMADIK is not set
 # CONFIG_ARCH_IOP13XX is not set
 # CONFIG_ARCH_IOP32X is not set
 # CONFIG_ARCH_IOP33X is not set
@@ -156,25 +164,27 @@ CONFIG_DEFAULT_IOSCHED="cfq"
 # CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_L7200 is not set
 CONFIG_ARCH_KIRKWOOD=y
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
 # CONFIG_ARCH_LOKI is not set
 # CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
 # CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
 # CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_MSM is not set
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_S3C2410 is not set
 # CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
 # CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_BCMRING is not set
-# CONFIG_ARCH_W90X900 is not set
 #
 # Marvell Kirkwood Implementations
@@ -185,6 +195,7 @@ CONFIG_MACH_RD88F6281=y
 CONFIG_MACH_MV88F6281GTW_GE=y
 CONFIG_MACH_SHEEVAPLUG=y
 CONFIG_MACH_TS219=y
+CONFIG_MACH_OPENRD_BASE=y
 CONFIG_PLAT_ORION=y
 #
@@ -195,7 +206,7 @@ CONFIG_CPU_FEROCEON=y
 # CONFIG_CPU_FEROCEON_OLD_ID is not set
 CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_PABRT_LEGACY=y
 CONFIG_CPU_CACHE_VIVT=y
 CONFIG_CPU_COPY_FEROCEON=y
 CONFIG_CPU_TLB_FEROCEON=y
@@ -211,6 +222,7 @@ CONFIG_ARM_THUMB=y
 CONFIG_OUTER_CACHE=y
 CONFIG_CACHE_FEROCEON_L2=y
 # CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
 #
 # Bus support
@@ -235,11 +247,12 @@ CONFIG_VMSPLIT_3G=y
 # CONFIG_VMSPLIT_2G is not set
 # CONFIG_VMSPLIT_1G is not set
 CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
 CONFIG_HZ=100
 CONFIG_AEABI=y
 # CONFIG_OABI_COMPAT is not set
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
 # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
 # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
 # CONFIG_HIGHMEM is not set
@@ -254,10 +267,12 @@ CONFIG_SPLIT_PTLOCK_CPUS=4096
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_ALIGNMENT_TRAP=y
+CONFIG_UACCESS_WITH_MEMCPY=y
 #
 # Boot options
@@ -345,6 +360,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -367,6 +383,7 @@ CONFIG_NET_DSA_MV88E6123_61_65=y
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
@@ -383,17 +400,18 @@ CONFIG_NET_PKTGEN=m
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 CONFIG_CFG80211=y
+# CONFIG_NL80211_TESTMODE is not set
+# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
 # CONFIG_CFG80211_REG_DEBUG is not set
+CONFIG_CFG80211_DEFAULT_PS=y
+CONFIG_CFG80211_DEFAULT_PS_VALUE=1
+# CONFIG_CFG80211_DEBUGFS is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
 CONFIG_LIB80211=y
 # CONFIG_LIB80211_DEBUG is not set
 CONFIG_MAC80211=y
-#
-# Rate control algorithm selection
-#
 CONFIG_MAC80211_RC_MINSTREL=y
 # CONFIG_MAC80211_RC_DEFAULT_PID is not set
 CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
@@ -414,6 +432,7 @@ CONFIG_MAC80211_RC_DEFAULT="minstrel"
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
@@ -425,9 +444,9 @@ CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_AFS_PARTS is not set
@@ -494,6 +513,7 @@ CONFIG_MTD_PHYSMAP=y
 # CONFIG_MTD_DATAFLASH is not set
 CONFIG_MTD_M25P80=y
 CONFIG_M25PXX_USE_FAST_READ=y
+# CONFIG_MTD_SST25L is not set
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
@@ -543,6 +563,7 @@ CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
 # CONFIG_MISC_DEVICES is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
@@ -567,10 +588,6 @@ CONFIG_BLK_DEV_SR=m
 # CONFIG_BLK_DEV_SR_VENDOR is not set
 CONFIG_CHR_DEV_SG=m
 # CONFIG_CHR_DEV_SCH is not set
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -587,6 +604,8 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
+# CONFIG_BE2ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -595,6 +614,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
@@ -611,7 +631,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -623,11 +642,14 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_PMCRAID is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_BFA_FC is not set
 # CONFIG_SCSI_DH is not set
 # CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
 CONFIG_SATA_PMP=y
 CONFIG_SATA_AHCI=y
 # CONFIG_SATA_SIL24 is not set
@@ -649,6 +671,7 @@ CONFIG_SATA_MV=y
 # CONFIG_PATA_ALI is not set
 # CONFIG_PATA_AMD is not set
 # CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATP867X is not set
 # CONFIG_PATA_ATIIXP is not set
 # CONFIG_PATA_CMD640_PCI is not set
 # CONFIG_PATA_CMD64X is not set
@@ -676,6 +699,7 @@ CONFIG_SATA_MV=y
 # CONFIG_PATA_OPTIDMA is not set
 # CONFIG_PATA_PDC_OLD is not set
 # CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RDC is not set
 # CONFIG_PATA_RZ1000 is not set
 # CONFIG_PATA_SC1200 is not set
 # CONFIG_PATA_SERVERWORKS is not set
@@ -693,13 +717,16 @@ CONFIG_SATA_MV=y
 #
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -768,6 +795,9 @@ CONFIG_NET_PCI=y
 # CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
 # CONFIG_ATL2 is not set
@@ -789,6 +819,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_MV643XX_ETH=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
@@ -797,10 +828,7 @@ CONFIG_MV643XX_ETH=y
 # CONFIG_JME is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
+CONFIG_WLAN=y
-#
-# Wireless LAN
-#
 # CONFIG_WLAN_PRE80211 is not set
 CONFIG_WLAN_80211=y
 CONFIG_LIBERTAS=y
@@ -820,9 +848,7 @@ CONFIG_LIBERTAS_SDIO=y
 # CONFIG_MAC80211_HWSIM is not set
 # CONFIG_MWL8K is not set
 # CONFIG_P54_COMMON is not set
-# CONFIG_ATH5K is not set
+# CONFIG_ATH_COMMON is not set
-# CONFIG_ATH9K is not set
-# CONFIG_AR9170_USB is not set
 # CONFIG_IPW2100 is not set
 # CONFIG_IPW2200 is not set
 # CONFIG_IWLWIFI is not set
@@ -832,6 +858,8 @@ CONFIG_LIBERTAS_SDIO=y
 # CONFIG_ZD1211RW is not set
 # CONFIG_RT2X00 is not set
 # CONFIG_HERMES is not set
+# CONFIG_WL12XX is not set
+# CONFIG_IWM is not set
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -855,6 +883,7 @@ CONFIG_LIBERTAS_SDIO=y
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
 # CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
 #
 # Input device support
@@ -878,13 +907,19 @@ CONFIG_INPUT_EVDEV=y
 # Input Device Drivers
 #
 CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
 CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_QT2160 is not set
 # CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_LM8323 is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
 # CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_KEYBOARD_GPIO=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
@@ -943,6 +978,7 @@ CONFIG_LEGACY_PTY_COUNT=16
 CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_COMPAT is not set
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_HELPER_AUTO=y
@@ -998,10 +1034,6 @@ CONFIG_I2C_MV64XXX=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -1023,11 +1055,47 @@ CONFIG_SPI_ORION=y
 #
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+#
+# Memory mapped GPIO expanders:
+#
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+#
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+# CONFIG_GPIO_LANGWELL is not set
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+#
+# AC97 GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
@@ -1041,33 +1109,28 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_TC6393XB is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
-#
+# CONFIG_AB3100_CORE is not set
-# Multimedia devices
+# CONFIG_EZX_PCAP is not set
-#
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
 #
 # Graphics support
 #
+CONFIG_VGA_ARB=y
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
@@ -1087,7 +1150,6 @@ CONFIG_DUMMY_CONSOLE=y
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
 #
@@ -1106,10 +1168,12 @@ CONFIG_HID_BELKIN=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
+CONFIG_HID_DRAGONRISE=y
 # CONFIG_DRAGONRISE_FF is not set
 CONFIG_HID_EZKEY=y
 CONFIG_HID_KYE=y
 CONFIG_HID_GYRATION=y
+CONFIG_HID_TWINHAN=y
 CONFIG_HID_KENSINGTON=y
 CONFIG_HID_LOGITECH=y
 # CONFIG_LOGITECH_FF is not set
@@ -1123,9 +1187,14 @@ CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
+CONFIG_HID_GREENASIA=y
 # CONFIG_GREENASIA_FF is not set
+CONFIG_HID_SMARTJOYPLUS=y
+# CONFIG_SMARTJOYPLUS_FF is not set
 CONFIG_HID_TOPSEED=y
+CONFIG_HID_THRUSTMASTER=y
 # CONFIG_THRUSTMASTER_FF is not set
+CONFIG_HID_ZEROPLUS=y
 # CONFIG_ZEROPLUS_FF is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
@@ -1150,18 +1219,21 @@ CONFIG_USB_DEVICE_CLASS=y
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 CONFIG_USB_EHCI_TT_NEWSCHED=y
 # CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
 # CONFIG_USB_OHCI_HCD is not set
 # CONFIG_USB_UHCI_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
 # CONFIG_USB_R8A66597_HCD is not set
 # CONFIG_USB_WHCI_HCD is not set
 # CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
 #
 # USB Device Class drivers
@@ -1252,11 +1324,14 @@ CONFIG_SDIO_UART=y
 # MMC/SD/SDIO Host Controller Drivers
 #
 # CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
 # CONFIG_MMC_TIFM_SD is not set
 CONFIG_MMC_MVSDIO=y
 # CONFIG_MMC_SPI is not set
+# CONFIG_MMC_CB710 is not set
+# CONFIG_MMC_VIA_SDMMC is not set
 # CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
@@ -1266,7 +1341,7 @@ CONFIG_LEDS_CLASS=y
 # CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=y
 CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP5521 is not set
+# CONFIG_LEDS_LP3944 is not set
 # CONFIG_LEDS_PCA955X is not set
 # CONFIG_LEDS_DAC124S085 is not set
 # CONFIG_LEDS_BD2802 is not set
@@ -1278,11 +1353,14 @@ CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 # CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+# CONFIG_LEDS_TRIGGER_GPIO is not set
 CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
 #
 # iptables trigger is under Netfilter config (LED target)
 #
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
@@ -1314,6 +1392,7 @@ CONFIG_RTC_INTF_DEV=y
 CONFIG_RTC_DRV_S35390A=y
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 #
 # SPI RTC drivers
@@ -1325,6 +1404,7 @@ CONFIG_RTC_DRV_S35390A=y
 # CONFIG_RTC_DRV_R9701 is not set
 # CONFIG_RTC_DRV_RS5C348 is not set
 # CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
 #
 # Platform RTC drivers
@@ -1360,8 +1440,11 @@ CONFIG_DMA_ENGINE=y
 # CONFIG_ASYNC_TX_DMA is not set
 # CONFIG_DMATEST is not set
 # CONFIG_AUXDISPLAY is not set
-# CONFIG_REGULATOR is not set
 # CONFIG_UIO is not set
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 #
@@ -1379,10 +1462,13 @@ CONFIG_JBD=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1455,7 +1541,6 @@ CONFIG_CRAMFS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1530,6 +1615,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -1547,6 +1633,7 @@ CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
 # CONFIG_DEBUG_PREEMPT is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
@@ -1567,12 +1654,14 @@ CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_KPROBES_SANITY_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_LKDTM is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
@@ -1581,25 +1670,12 @@ CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_NOP_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_RING_BUFFER=y
+CONFIG_EVENT_TRACING=y
+CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
 CONFIG_TRACING=y
 CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_FTRACE_STARTUP_TEST is not set
 # CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
@@ -1623,7 +1699,6 @@ CONFIG_CRYPTO=y
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD2=y
@@ -1665,11 +1740,13 @@ CONFIG_CRYPTO_PCBC=m
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 #
 # Digest
 #
 CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1714,6 +1791,7 @@ CONFIG_CRYPTO_ARC4=y
 #
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
+CONFIG_CRYPTO_DEV_MV_CESA=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
 CONFIG_BINARY_PRINTF=y
diff --git a/arch/arm/configs/n8x0_defconfig b/arch/arm/configs/n8x0_defconfig
index 8da75dede52e..264f52b5c52d 100644
--- a/arch/arm/configs/n8x0_defconfig
+++ b/arch/arm/configs/n8x0_defconfig
@@ -304,7 +304,7 @@ CONFIG_ALIGNMENT_TRAP=y
 CONFIG_ZBOOT_ROM_TEXT=0x10C08000
 CONFIG_ZBOOT_ROM_BSS=0x10200000
 # CONFIG_ZBOOT_ROM is not set
-CONFIG_CMDLINE="root=1f03 rootfstype=jffs2 console=ttyS0,115200n8"
+CONFIG_CMDLINE="root=1f03 rootfstype=jffs2 console=ttyS2,115200n8"
 # CONFIG_XIP_KERNEL is not set
 # CONFIG_KEXEC is not set
diff --git a/arch/arm/configs/w90p910_defconfig b/arch/arm/configs/nuc910_defconfig
index 5245655a0ad3..5245655a0ad3 100644
--- a/arch/arm/configs/w90p910_defconfig
+++ b/arch/arm/configs/nuc910_defconfig
diff --git a/arch/arm/configs/nuc950_defconfig b/arch/arm/configs/nuc950_defconfig
new file mode 100644
index 000000000000..df1de9b45ca4
--- /dev/null
+++ b/arch/arm/configs/nuc950_defconfig
@@ -0,0 +1,922 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.32-rc7
+# Tue Nov 17 12:31:33 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_RELAY=y
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+CONFIG_USER_NS=y
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+# CONFIG_MODULES is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+CONFIG_ARCH_W90X900=y
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_BCMRING is not set
+CONFIG_CPU_NUC950=y
+#
+# W90P910 Machines
+#
+# CONFIG_MACH_W90P910EVB is not set
+#
+# NUC950 Machines
+#
+CONFIG_MACH_W90P950EVB=y
+#
+# NUC960 Machines
+#
+# CONFIG_MACH_W90N960EVB is not set
+#
+# NUC932 Machines
+#
+# CONFIG_MACH_NUC932EVB is not set
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_LEGACY=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
+CONFIG_COMMON_CLKDEV=y
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0
+CONFIG_ZBOOT_ROM_BSS=0
+CONFIG_CMDLINE="root=/dev/ram0 console=ttyS0,115200n8 rdinit=/sbin/init mem=64M"
+# CONFIG_XIP_KERNEL is not set
+CONFIG_KEXEC=y
+CONFIG_ATAGS_PROC=y
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+#
+# Floating point emulation
+#
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+CONFIG_BINFMT_AOUT=y
+CONFIG_BINFMT_MISC=y
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_NET is not set
+#
+# Device Drivers
+#
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_PLATRAM is not set
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_SCSI_PROC_FS is not set
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_PHONE is not set
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=1
+CONFIG_SERIAL_8250_RUNTIME_UARTS=1
+# CONFIG_SERIAL_8250_EXTENDED is not set
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_GPIO_SYSFS is not set
+#
+# Memory mapped GPIO expanders:
+#
+#
+# I2C GPIO expanders:
+#
+#
+# PCI GPIO expanders:
+#
+#
+# SPI GPIO expanders:
+#
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_EHCI_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_GADGET is not set
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+CONFIG_GENERIC_ACL=y
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+# CONFIG_ROMFS_BACKED_BY_MTD is not set
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_BLOCK=y
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+#
+# Library routines
+#
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+# CONFIG_CRC32 is not set
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/nuc960_defconfig b/arch/arm/configs/nuc960_defconfig
new file mode 100644
index 000000000000..4b2cd9eae9bc
--- /dev/null
+++ b/arch/arm/configs/nuc960_defconfig
@@ -0,0 +1,922 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.32-rc7
+# Tue Nov 17 12:20:11 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_RELAY=y
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+CONFIG_USER_NS=y
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+# CONFIG_MODULES is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+CONFIG_ARCH_W90X900=y
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_BCMRING is not set
+CONFIG_CPU_NUC960=y
+#
+# W90P910 Machines
+#
+# CONFIG_MACH_W90P910EVB is not set
+#
+# NUC950 Machines
+#
+# CONFIG_MACH_W90P950EVB is not set
+#
+# NUC960 Machines
+#
+CONFIG_MACH_W90N960EVB=y
+#
+# NUC932 Machines
+#
+# CONFIG_MACH_NUC932EVB is not set
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_LEGACY=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
+CONFIG_COMMON_CLKDEV=y
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0
+CONFIG_ZBOOT_ROM_BSS=0
+CONFIG_CMDLINE="root=/dev/ram0 console=ttyS0,115200n8 rdinit=/sbin/init mem=64M"
+# CONFIG_XIP_KERNEL is not set
+CONFIG_KEXEC=y
+CONFIG_ATAGS_PROC=y
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+#
+# Floating point emulation
+#
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+CONFIG_BINFMT_AOUT=y
+CONFIG_BINFMT_MISC=y
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_NET is not set
+#
+# Device Drivers
+#
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_PLATRAM is not set
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_SCSI_PROC_FS is not set
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_PHONE is not set
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=1
+CONFIG_SERIAL_8250_RUNTIME_UARTS=1
+# CONFIG_SERIAL_8250_EXTENDED is not set
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_GPIO_SYSFS is not set
+#
+# Memory mapped GPIO expanders:
+#
+#
+# I2C GPIO expanders:
+#
+#
+# PCI GPIO expanders:
+#
+#
+# SPI GPIO expanders:
+#
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_EHCI_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_GADGET is not set
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+CONFIG_GENERIC_ACL=y
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+# CONFIG_ROMFS_BACKED_BY_MTD is not set
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_BLOCK=y
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+#
+# Library routines
+#
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+# CONFIG_CRC32 is not set
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/omap3_pandora_defconfig b/arch/arm/configs/omap3_pandora_defconfig
index b54ad2e2da36..150deafb0a6a 100644
--- a/arch/arm/configs/omap3_pandora_defconfig
+++ b/arch/arm/configs/omap3_pandora_defconfig
@@ -611,7 +611,7 @@ CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_GPIO is not set
+CONFIG_KEYBOARD_GPIO=y
 CONFIG_INPUT_MOUSE=y
 # CONFIG_MOUSE_PS2 is not set
 # CONFIG_MOUSE_SERIAL is not set
@@ -634,7 +634,8 @@ CONFIG_TOUCHSCREEN_ADS7846=y
 # CONFIG_TOUCHSCREEN_TOUCHWIN is not set
 # CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
 # CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_INPUT_MISC is not set
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_TWL4030_PWRBUTTON=y
 #
 # Hardware I/O ports
@@ -834,7 +835,29 @@ CONFIG_DAB=y
 #
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
+CONFIG_SOUND=y
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_JACK=y
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+CONFIG_SND_VERBOSE_PRINTK=y
+CONFIG_SND_DRIVERS=y
+CONFIG_SND_USB=y
+CONFIG_SND_SOC=y
+CONFIG_SND_OMAP_SOC=y
+CONFIG_SND_OMAP_SOC_MCBSP=y
+CONFIG_SND_OMAP_SOC_OMAP3_PANDORA=y
+CONFIG_SND_SOC_I2C_AND_SPI=y
+CONFIG_SND_SOC_TWL4030=y
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
@@ -1020,7 +1043,13 @@ CONFIG_MMC_BLOCK_BOUNCE=y
 # CONFIG_MMC_SPI is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_GPIO_PLATFORM=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
@@ -1084,9 +1113,12 @@ CONFIG_RTC_DRV_TWL4030=y
 # on-CPU RTC drivers
 #
 # CONFIG_DMADEVICES is not set
-# CONFIG_REGULATOR is not set
 # CONFIG_UIO is not set
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_REGULATOR_TWL4030=y
 #
 # File systems
 #
@@ -1407,3 +1439,10 @@ CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+# added by hand for now
+CONFIG_KEYBOARD_TWL4030=y
+CONFIG_USB_OTG_UTILS=y
+CONFIG_TWL4030_USB=y
+CONFIG_MMC_OMAP_HS=y
diff --git a/arch/arm/configs/omap_3430sdp_defconfig b/arch/arm/configs/omap_3430sdp_defconfig
index 8a4a7e2ba87b..5a305f015307 100644
--- a/arch/arm/configs/omap_3430sdp_defconfig
+++ b/arch/arm/configs/omap_3430sdp_defconfig
@@ -1703,7 +1703,14 @@ CONFIG_RTC_DRV_TWL4030=y
 # on-CPU RTC drivers
 #
 # CONFIG_DMADEVICES is not set
-# CONFIG_REGULATOR is not set
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_REGULATOR_MAX1586 is not set
+CONFIG_REGULATOR_TWL4030=y
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
diff --git a/arch/arm/configs/orion5x_defconfig b/arch/arm/configs/orion5x_defconfig
index 9e2385293ecb..5383cd0dff54 100644
--- a/arch/arm/configs/orion5x_defconfig
+++ b/arch/arm/configs/orion5x_defconfig
@@ -1,15 +1,13 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc4
+# Linux kernel version: 2.6.32-rc6
-# Mon May  4 14:07:25 2009
+# Sat Nov  7 20:52:21 2009
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -18,13 +16,12 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_HARDIRQS_SW_RESEND=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 #
 # General setup
@@ -46,11 +43,12 @@ CONFIG_SYSVIPC_SYSCTL=y
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
+CONFIG_TREE_RCU=y
-# CONFIG_TREE_RCU is not set
+# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_GROUP_SCHED is not set
@@ -69,7 +67,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -82,6 +79,10 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+#
+# Kernel Performance Events And Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 # CONFIG_SLUB_DEBUG is not set
@@ -91,13 +92,17 @@ CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
 CONFIG_TRACEPOINTS=y
-# CONFIG_MARKERS is not set
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
 CONFIG_KRETPROBES=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_RT_MUTEXES=y
@@ -109,7 +114,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
@@ -130,19 +135,22 @@ CONFIG_DEFAULT_IOSCHED="cfq"
 #
 # System Type
 #
+CONFIG_MMU=y
 # CONFIG_ARCH_AAEC2000 is not set
 # CONFIG_ARCH_INTEGRATOR is not set
 # CONFIG_ARCH_REALVIEW is not set
 # CONFIG_ARCH_VERSATILE is not set
 # CONFIG_ARCH_AT91 is not set
 # CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_EBSA110 is not set
 # CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_NOMADIK is not set
 # CONFIG_ARCH_IOP13XX is not set
 # CONFIG_ARCH_IOP32X is not set
 # CONFIG_ARCH_IOP33X is not set
@@ -151,25 +159,27 @@ CONFIG_DEFAULT_IOSCHED="cfq"
 # CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_L7200 is not set
 # CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
 # CONFIG_ARCH_LOKI is not set
 # CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
 CONFIG_ARCH_ORION5X=y
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
 # CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_MSM is not set
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_S3C2410 is not set
 # CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
 # CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_BCMRING is not set
-# CONFIG_ARCH_W90X900 is not set
 #
 # Orion Implementations
@@ -187,6 +197,9 @@ CONFIG_MACH_WRT350N_V2=y
 CONFIG_MACH_TS78XX=y
 CONFIG_MACH_MV2120=y
 CONFIG_MACH_EDMINI_V2=y
+CONFIG_MACH_D2NET=y
+CONFIG_MACH_BIGDISK=y
+CONFIG_MACH_NET2BIG=y
 CONFIG_MACH_MSS2=y
 CONFIG_MACH_WNR854T=y
 CONFIG_MACH_RD88F5181L_GE=y
@@ -202,7 +215,7 @@ CONFIG_CPU_FEROCEON=y
 CONFIG_CPU_FEROCEON_OLD_ID=y
 CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_PABRT_LEGACY=y
 CONFIG_CPU_CACHE_VIVT=y
 CONFIG_CPU_COPY_FEROCEON=y
 CONFIG_CPU_TLB_FEROCEON=y
@@ -215,7 +228,7 @@ CONFIG_CPU_CP15_MMU=y
 CONFIG_ARM_THUMB=y
 # CONFIG_CPU_ICACHE_DISABLE is not set
 # CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
 #
 # Bus support
@@ -240,11 +253,12 @@ CONFIG_VMSPLIT_3G=y
 # CONFIG_VMSPLIT_2G is not set
 # CONFIG_VMSPLIT_1G is not set
 CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
 CONFIG_HZ=100
 CONFIG_AEABI=y
 CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
 # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
 # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
 # CONFIG_HIGHMEM is not set
@@ -259,12 +273,14 @@ CONFIG_SPLIT_PTLOCK_CPUS=4096
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_LEDS=y
 CONFIG_LEDS_CPU=y
 CONFIG_ALIGNMENT_TRAP=y
+CONFIG_UACCESS_WITH_MEMCPY=y
 #
 # Boot options
@@ -308,6 +324,7 @@ CONFIG_PM=y
 # CONFIG_PM_DEBUG is not set
 # CONFIG_SUSPEND is not set
 # CONFIG_APM_EMULATION is not set
+# CONFIG_PM_RUNTIME is not set
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
@@ -356,6 +373,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -378,6 +396,7 @@ CONFIG_NET_DSA_MV88E6123_61_65=y
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
@@ -394,11 +413,15 @@ CONFIG_NET_PKTGEN=m
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+#
+# CFG80211 needs to be enabled for MAC80211
+#
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -411,6 +434,7 @@ CONFIG_WIRELESS_EXT_SYSFS=y
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
@@ -422,9 +446,9 @@ CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_AFS_PARTS is not set
@@ -537,6 +561,7 @@ CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_SGI_IOC4 is not set
@@ -552,7 +577,9 @@ CONFIG_MISC_DEVICES=y
 #
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
@@ -576,10 +603,6 @@ CONFIG_BLK_DEV_SR=m
 # CONFIG_BLK_DEV_SR_VENDOR is not set
 CONFIG_CHR_DEV_SG=m
 # CONFIG_CHR_DEV_SCH is not set
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -596,6 +619,8 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
+# CONFIG_BE2ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -604,6 +629,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
@@ -620,7 +646,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -632,11 +657,14 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_PMCRAID is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_BFA_FC is not set
 # CONFIG_SCSI_DH is not set
 # CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
 CONFIG_SATA_PMP=y
 # CONFIG_SATA_AHCI is not set
 # CONFIG_SATA_SIL24 is not set
@@ -658,6 +686,7 @@ CONFIG_SATA_MV=y
 # CONFIG_PATA_ALI is not set
 # CONFIG_PATA_AMD is not set
 # CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATP867X is not set
 # CONFIG_PATA_ATIIXP is not set
 # CONFIG_PATA_CMD640_PCI is not set
 # CONFIG_PATA_CMD64X is not set
@@ -685,6 +714,7 @@ CONFIG_SATA_MV=y
 # CONFIG_PATA_OPTIDMA is not set
 # CONFIG_PATA_PDC_OLD is not set
 # CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RDC is not set
 # CONFIG_PATA_RZ1000 is not set
 # CONFIG_PATA_SC1200 is not set
 # CONFIG_PATA_SERVERWORKS is not set
@@ -703,13 +733,16 @@ CONFIG_SATA_MV=y
 #
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -777,6 +810,8 @@ CONFIG_NET_PCI=y
 # CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
 # CONFIG_ATL2 is not set
@@ -798,6 +833,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_MV643XX_ETH=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
@@ -806,10 +842,7 @@ CONFIG_MV643XX_ETH=y
 # CONFIG_JME is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
+CONFIG_WLAN=y
-#
-# Wireless LAN
-#
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
@@ -835,6 +868,7 @@ CONFIG_MV643XX_ETH=y
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
 # CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
 #
 # Input device support
@@ -855,13 +889,19 @@ CONFIG_INPUT_EVDEV=y
 # Input Device Drivers
 #
 CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_QT2160 is not set
 # CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_LM8323 is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
 # CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_KEYBOARD_GPIO=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
@@ -912,6 +952,7 @@ CONFIG_HW_RANDOM_TIMERIOMEM=m
 CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_COMPAT is not set
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_HELPER_AUTO=y
@@ -967,20 +1008,55 @@ CONFIG_I2C_MV64XXX=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+#
+# Memory mapped GPIO expanders:
+#
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+#
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+# CONFIG_GPIO_LANGWELL is not set
+#
+# SPI GPIO expanders:
+#
+#
+# AC97 GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+#
+# Native drivers
+#
 # CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
@@ -1030,6 +1106,8 @@ CONFIG_SENSORS_LM75=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -1041,9 +1119,7 @@ CONFIG_SENSORS_LM75=y
 # CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
@@ -1057,33 +1133,26 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_TC6393XB is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
-#
+# CONFIG_REGULATOR is not set
-# Multimedia devices
+# CONFIG_MEDIA_SUPPORT is not set
-#
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
 #
 # Graphics support
 #
+# CONFIG_VGA_ARB is not set
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
@@ -1097,7 +1166,6 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
 #
@@ -1116,10 +1184,11 @@ CONFIG_USB_HID=y
 # CONFIG_HID_CHERRY is not set
 # CONFIG_HID_CHICONY is not set
 # CONFIG_HID_CYPRESS is not set
-# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_DRAGONRISE is not set
 # CONFIG_HID_EZKEY is not set
 # CONFIG_HID_KYE is not set
 # CONFIG_HID_GYRATION is not set
+# CONFIG_HID_TWINHAN is not set
 # CONFIG_HID_KENSINGTON is not set
 # CONFIG_HID_LOGITECH is not set
 # CONFIG_HID_MICROSOFT is not set
@@ -1130,10 +1199,11 @@ CONFIG_USB_HID=y
 # CONFIG_HID_SAMSUNG is not set
 # CONFIG_HID_SONY is not set
 # CONFIG_HID_SUNPLUS is not set
-# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
 # CONFIG_HID_TOPSEED is not set
-# CONFIG_THRUSTMASTER_FF is not set
+# CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_ZEROPLUS_FF is not set
+# CONFIG_HID_ZEROPLUS is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1160,18 +1230,21 @@ CONFIG_USB_DEVICE_CLASS=y
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 CONFIG_USB_EHCI_TT_NEWSCHED=y
 # CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
 # CONFIG_USB_OHCI_HCD is not set
 # CONFIG_USB_UHCI_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
 # CONFIG_USB_R8A66597_HCD is not set
 # CONFIG_USB_WHCI_HCD is not set
 # CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
 #
 # USB Device Class drivers
@@ -1248,7 +1321,6 @@ CONFIG_USB_STORAGE_JUMPSHOT=y
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
@@ -1258,7 +1330,7 @@ CONFIG_LEDS_CLASS=y
 # CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=y
 CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP5521 is not set
+# CONFIG_LEDS_LP3944 is not set
 # CONFIG_LEDS_PCA955X is not set
 # CONFIG_LEDS_BD2802 is not set
@@ -1269,11 +1341,14 @@ CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 # CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+# CONFIG_LEDS_TRIGGER_GPIO is not set
 CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
 #
 # iptables trigger is under Netfilter config (LED target)
 #
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
@@ -1306,6 +1381,7 @@ CONFIG_RTC_DRV_M41T80=y
 CONFIG_RTC_DRV_S35390A=y
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 #
 # SPI RTC drivers
@@ -1344,8 +1420,11 @@ CONFIG_DMA_ENGINE=y
 # CONFIG_ASYNC_TX_DMA is not set
 # CONFIG_DMATEST is not set
 # CONFIG_AUXDISPLAY is not set
-# CONFIG_REGULATOR is not set
 # CONFIG_UIO is not set
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 #
@@ -1358,10 +1437,10 @@ CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
 CONFIG_EXT4_FS=m
-# CONFIG_EXT4DEV_COMPAT is not set
 CONFIG_EXT4_FS_XATTR=y
 # CONFIG_EXT4_FS_POSIX_ACL is not set
 # CONFIG_EXT4_FS_SECURITY is not set
+# CONFIG_EXT4_DEBUG is not set
 CONFIG_JBD=y
 # CONFIG_JBD_DEBUG is not set
 CONFIG_JBD2=m
@@ -1370,10 +1449,13 @@ CONFIG_FS_MBCACHE=m
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1446,7 +1528,6 @@ CONFIG_CRAMFS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1537,6 +1618,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -1552,6 +1634,7 @@ CONFIG_SCHED_DEBUG=y
 CONFIG_SCHEDSTATS=y
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
 CONFIG_DEBUG_PREEMPT=y
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
@@ -1572,6 +1655,7 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 CONFIG_FRAME_POINTER=y
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
@@ -1579,6 +1663,7 @@ CONFIG_FRAME_POINTER=y
 # CONFIG_KPROBES_SANITY_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_LKDTM is not set
 # CONFIG_FAULT_INJECTION is not set
 CONFIG_LATENCYTOP=y
@@ -1587,25 +1672,12 @@ CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_NOP_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_RING_BUFFER=y
+CONFIG_EVENT_TRACING=y
+CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
 CONFIG_TRACING=y
 CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_FTRACE_STARTUP_TEST is not set
 # CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
@@ -1629,20 +1701,19 @@ CONFIG_CRYPTO=y
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI=m
+CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_ALGAPI2=m
+CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_AEAD2=m
 CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_BLKCIPHER2=m
+CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH2=m
+CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=m
+CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=m
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=m
-CONFIG_CRYPTO_MANAGER2=m
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=m
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_TEST is not set
@@ -1670,11 +1741,13 @@ CONFIG_CRYPTO_PCBC=m
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1691,7 +1764,7 @@ CONFIG_CRYPTO_PCBC=m
 #
 # Ciphers
 #
-# CONFIG_CRYPTO_AES is not set
+CONFIG_CRYPTO_AES=y
 # CONFIG_CRYPTO_ANUBIS is not set
 # CONFIG_CRYPTO_ARC4 is not set
 # CONFIG_CRYPTO_BLOWFISH is not set
@@ -1719,6 +1792,7 @@ CONFIG_CRYPTO_PCBC=m
 #
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
+CONFIG_CRYPTO_DEV_MV_CESA=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
 CONFIG_BINARY_PRINTF=y
diff --git a/arch/arm/configs/u300_defconfig b/arch/arm/configs/u300_defconfig
index 7d61ae6e75da..953ba0297fc4 100644
--- a/arch/arm/configs/u300_defconfig
+++ b/arch/arm/configs/u300_defconfig
@@ -1,14 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc3
+# Linux kernel version: 2.6.32-rc5
-# Thu Jul 16 23:36:10 2009
+# Sat Oct 17 23:32:24 2009
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
+CONFIG_HAVE_TCM=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -44,11 +44,12 @@ CONFIG_SYSVIPC_SYSCTL=y
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
+CONFIG_TREE_RCU=y
-# CONFIG_TREE_RCU is not set
+# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_GROUP_SCHED is not set
@@ -80,17 +81,15 @@ CONFIG_SHMEM=y
 # CONFIG_AIO is not set
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
 # CONFIG_VM_EVENT_COUNTERS is not set
 CONFIG_SLUB_DEBUG=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_KPROBES=y
@@ -133,6 +132,7 @@ CONFIG_DEFAULT_IOSCHED="deadline"
 #
 # System Type
 #
+CONFIG_MMU=y
 # CONFIG_ARCH_AAEC2000 is not set
 # CONFIG_ARCH_INTEGRATOR is not set
 # CONFIG_ARCH_REALVIEW is not set
@@ -147,6 +147,7 @@ CONFIG_DEFAULT_IOSCHED="deadline"
 # CONFIG_ARCH_STMP3XXX is not set
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
 # CONFIG_ARCH_IOP13XX is not set
 # CONFIG_ARCH_IOP32X is not set
 # CONFIG_ARCH_IOP33X is not set
@@ -169,11 +170,13 @@ CONFIG_DEFAULT_IOSCHED="deadline"
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_S3C2410 is not set
 # CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
 CONFIG_ARCH_U300=y
 # CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_BCMRING is not set
 #
 # ST-Ericsson AB U300/U330/U335/U365 Platform
@@ -195,6 +198,7 @@ CONFIG_MACH_U300_BS335=y
 CONFIG_MACH_U300_DUAL_RAM=y
 CONFIG_U300_DEBUG=y
 # CONFIG_MACH_U300_SEMI_IS_SHARED is not set
+CONFIG_MACH_U300_SPIDUMMY=y
 #
 # All the settings below must match the bootloader's settings
@@ -207,7 +211,7 @@ CONFIG_CPU_32=y
 CONFIG_CPU_ARM926T=y
 CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_PABRT_LEGACY=y
 CONFIG_CPU_CACHE_VIVT=y
 CONFIG_CPU_COPY_V4WB=y
 CONFIG_CPU_TLB_V4WBI=y
@@ -222,6 +226,7 @@ CONFIG_ARM_THUMB=y
 # CONFIG_CPU_DCACHE_DISABLE is not set
 # CONFIG_CPU_DCACHE_WRITETHROUGH is not set
 # CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
 CONFIG_ARM_VIC=y
 CONFIG_ARM_VIC_NR=2
 CONFIG_COMMON_CLKDEV=y
@@ -245,6 +250,8 @@ CONFIG_VMSPLIT_3G=y
 # CONFIG_VMSPLIT_2G is not set
 # CONFIG_VMSPLIT_1G is not set
 CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
 CONFIG_HZ=100
 CONFIG_AEABI=y
@@ -265,6 +272,7 @@ CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_ALIGNMENT_TRAP=y
 # CONFIG_UACCESS_WITH_MEMCPY is not set
@@ -313,6 +321,7 @@ CONFIG_PM=y
 # CONFIG_PM_DEBUG is not set
 # CONFIG_SUSPEND is not set
 # CONFIG_APM_EMULATION is not set
+# CONFIG_PM_RUNTIME is not set
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
@@ -351,6 +360,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -391,6 +401,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 CONFIG_FW_LOADER=y
@@ -402,9 +413,9 @@ CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_AFS_PARTS is not set
@@ -453,6 +464,7 @@ CONFIG_MTD_CFI_I2=y
 #
 # CONFIG_MTD_DATAFLASH is not set
 # CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
@@ -520,6 +532,7 @@ CONFIG_HAVE_IDE=y
 # CONFIG_MD is not set
 # CONFIG_NETDEVICES is not set
 # CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
 #
 # Input device support
@@ -540,12 +553,16 @@ CONFIG_INPUT_EVDEV=y
 # Input Device Drivers
 #
 CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
 # CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_QT2160 is not set
 # CONFIG_KEYBOARD_LKKBD is not set
 # CONFIG_KEYBOARD_GPIO is not set
 # CONFIG_KEYBOARD_MATRIX is not set
 # CONFIG_KEYBOARD_LM8323 is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
 # CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
 # CONFIG_KEYBOARD_SUNKBD is not set
 # CONFIG_KEYBOARD_XTKBD is not set
@@ -597,6 +614,7 @@ CONFIG_LEGACY_PTY_COUNT=16
 # CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 # CONFIG_I2C_CHARDEV is not set
 CONFIG_I2C_HELPER_AUTO=y
@@ -629,9 +647,6 @@ CONFIG_I2C_STU300=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -653,16 +668,21 @@ CONFIG_SPI_PL022=y
 #
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 # CONFIG_W1 is not set
 CONFIG_POWER_SUPPLY=y
 # CONFIG_POWER_SUPPLY_DEBUG is not set
 # CONFIG_PDA_POWER is not set
 # CONFIG_BATTERY_DS2760 is not set
+# CONFIG_BATTERY_DS2782 is not set
 # CONFIG_BATTERY_BQ27x00 is not set
 # CONFIG_BATTERY_MAX17040 is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
@@ -690,10 +710,24 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_TC6387XB is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
 CONFIG_AB3100_CORE=y
+CONFIG_AB3100_OTP=y
 # CONFIG_EZX_PCAP is not set
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_REGULATOR_MAX1586 is not set
+# CONFIG_REGULATOR_LP3971 is not set
+CONFIG_REGULATOR_AB3100=y
+# CONFIG_REGULATOR_TPS65023 is not set
+# CONFIG_REGULATOR_TPS6507X is not set
 # CONFIG_MEDIA_SUPPORT is not set
 #
@@ -792,9 +826,10 @@ CONFIG_MMC_BLOCK_BOUNCE=y
 #
 CONFIG_MMC_ARMMMCI=y
 # CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
 # CONFIG_MMC_SPI is not set
 # CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
@@ -820,10 +855,10 @@ CONFIG_LEDS_TRIGGER_BACKLIGHT=y
 #
 # iptables trigger is under Netfilter config (LED target)
 #
+# CONFIG_ACCESSIBILITY is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
+# CONFIG_RTC_HCTOSYS is not set
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
 # CONFIG_RTC_DEBUG is not set
 #
@@ -863,6 +898,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_R9701 is not set
 # CONFIG_RTC_DRV_RS5C348 is not set
 # CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
 #
 # Platform RTC drivers
@@ -878,27 +914,25 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_M48T59 is not set
 # CONFIG_RTC_DRV_BQ4802 is not set
 # CONFIG_RTC_DRV_V3020 is not set
+CONFIG_RTC_DRV_AB3100=y
 #
 # on-CPU RTC drivers
 #
 # CONFIG_RTC_DRV_PL030 is not set
 # CONFIG_RTC_DRV_PL031 is not set
+CONFIG_RTC_DRV_COH901331=y
 CONFIG_DMADEVICES=y
 #
 # DMA Devices
 #
 # CONFIG_AUXDISPLAY is not set
-CONFIG_REGULATOR=y
-# CONFIG_REGULATOR_DEBUG is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_REGULATOR_MAX1586 is not set
-# CONFIG_REGULATOR_LP3971 is not set
 # CONFIG_UIO is not set
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 #
@@ -913,6 +947,7 @@ CONFIG_REGULATOR=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
@@ -975,7 +1010,6 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 # CONFIG_NETWORK_FILESYSTEMS is not set
 #
@@ -1033,6 +1067,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
@@ -1066,11 +1101,13 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 # CONFIG_SYSCTL_SYSCALL_CHECK is not set
@@ -1121,6 +1158,7 @@ CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC32 is not set
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
+CONFIG_GENERIC_ALLOCATOR=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig
new file mode 100644
index 000000000000..15fde22ce3f3
--- /dev/null
+++ b/arch/arm/configs/u8500_defconfig
@@ -0,0 +1,680 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.32-rc8
+# Mon Nov 30 11:11:29 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_LOCKBREAK=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_RT_GROUP_SCHED=y
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_STOP_MACHINE=y
+CONFIG_BLOCK=y
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_BCMRING is not set
+CONFIG_ARCH_U8500=y
+CONFIG_PLAT_NOMADIK=y
+CONFIG_HAS_MTU=y
+#
+# ST-Ericsson platform type
+#
+#
+# ST-Ericsson Multicore Mobile Platforms
+#
+CONFIG_MACH_U8500_MOP=y
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_PABRT_V7=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_ARM_THUMBEE is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_HAS_TLS_REG=y
+CONFIG_ARM_L1_CACHE_SHIFT=5
+# CONFIG_ARM_ERRATA_430973 is not set
+# CONFIG_ARM_ERRATA_458693 is not set
+# CONFIG_ARM_ERRATA_460075 is not set
+CONFIG_ARM_GIC=y
+CONFIG_COMMON_CLKDEV=y
+#
+# Bus support
+#
+CONFIG_ARM_AMBA=y
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+#
+# Kernel Features
+#
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_SMP=y
+CONFIG_HAVE_ARM_SCU=y
+CONFIG_HAVE_ARM_TWD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_NR_CPUS=2
+# CONFIG_HOTPLUG_CPU is not set
+CONFIG_LOCAL_TIMERS=y
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+# CONFIG_THUMB2_KERNEL is not set
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0
+CONFIG_ZBOOT_ROM_BSS=0
+CONFIG_CMDLINE="root=/dev/ram0 console=ttyAMA2,115200n8"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+#
+# Floating point emulation
+#
+#
+# At least one emulation must be selected
+#
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
+CONFIG_VFP=y
+CONFIG_VFPv3=y
+CONFIG_NEON=y
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_NET is not set
+#
+# Device Drivers
+#
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=65536
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_PHONE is not set
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_AMBA_PL010 is not set
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+# CONFIG_SERIAL_MAX3100 is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+CONFIG_SPI_PL022=y
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_EZX_PCAP is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+CONFIG_GENERIC_ACL=y
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_CONFIGFS_FS=m
+# CONFIG_MISC_FILESYSTEMS is not set
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+#
+# Library routines
+#
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=m
+# CONFIG_CRC_ITU_T is not set
+# CONFIG_CRC32 is not set
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/include/asm/cacheflush.h b/arch/arm/include/asm/cacheflush.h
index fd03fb63a332..9fd6d3ab68c0 100644
--- a/arch/arm/include/asm/cacheflush.h
+++ b/arch/arm/include/asm/cacheflush.h
@@ -331,15 +331,15 @@ static inline void outer_flush_range(unsigned long start, unsigned long end)
 * Convert calls to our calling convention.
 */
 #define flush_cache_all()               __cpuc_flush_kern_all()
-#ifndef CONFIG_CPU_CACHE_VIPT
-static inline void flush_cache_mm(struct mm_struct *mm)
+static inline void vivt_flush_cache_mm(struct mm_struct *mm)
 {
        if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(mm)))
                __cpuc_flush_user_all();
 }
 static inline void
-flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned long end)
+vivt_flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned long end)
 {
        if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm)))
                __cpuc_flush_user_range(start & PAGE_MASK, PAGE_ALIGN(end),
@@ -347,7 +347,7 @@ flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned long
 }
 static inline void
-flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr, unsigned long pfn)
+vivt_flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr, unsigned long pfn)
 {
        if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm))) {
                unsigned long addr = user_addr & PAGE_MASK;
@@ -356,7 +356,7 @@ flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr, unsigned l
 }
 static inline void
-flush_ptrace_access(struct vm_area_struct *vma, struct page *page,
+vivt_flush_ptrace_access(struct vm_area_struct *vma, struct page *page,
                         unsigned long uaddr, void *kaddr,
                         unsigned long len, int write)
 {
@@ -365,6 +365,16 @@ flush_ptrace_access(struct vm_area_struct *vma, struct page *page,
                __cpuc_coherent_kern_range(addr, addr + len);
        }
 }
+#ifndef CONFIG_CPU_CACHE_VIPT
+#define flush_cache_mm(mm) \
+                vivt_flush_cache_mm(mm)
+#define flush_cache_range(vma,start,end) \
+                vivt_flush_cache_range(vma,start,end)
+#define flush_cache_page(vma,addr,pfn) \
+                vivt_flush_cache_page(vma,addr,pfn)
+#define flush_ptrace_access(vma,page,ua,ka,len,write) \
+                vivt_flush_ptrace_access(vma,page,ua,ka,len,write)
 #else
 extern void flush_cache_mm(struct mm_struct *mm);
 extern void flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned long end);
@@ -410,13 +420,16 @@ extern void flush_ptrace_access(struct vm_area_struct *vma, struct page *page,
 */
 extern void flush_dcache_page(struct page *);
-extern void __flush_dcache_page(struct address_space *mapping, struct page *page);
 static inline void __flush_icache_all(void)
 {
+#ifdef CONFIG_ARM_ERRATA_411920
+        extern void v6_icache_inval_all(void);
+        v6_icache_inval_all();
+#else
        asm("mcr        p15, 0, %0, c7, c5, 0   @ invalidate I-cache\n"
            :
            : "r" (0));
+#endif
 }
 #define ARCH_HAS_FLUSH_ANON_PAGE
diff --git a/arch/arm/include/asm/dma-mapping.h b/arch/arm/include/asm/dma-mapping.h
index ff46dfa68a97..a96300bf83fd 100644
--- a/arch/arm/include/asm/dma-mapping.h
+++ b/arch/arm/include/asm/dma-mapping.h
@@ -15,20 +15,15 @@
 * must not be used by drivers.
 */
 #ifndef __arch_page_to_dma
-#if !defined(CONFIG_HIGHMEM)
 static inline dma_addr_t page_to_dma(struct device *dev, struct page *page)
 {
-        return (dma_addr_t)__virt_to_bus((unsigned long)page_address(page));
+        return (dma_addr_t)__pfn_to_bus(page_to_pfn(page));
 }
-#elif defined(__pfn_to_bus)
-static inline dma_addr_t page_to_dma(struct device *dev, struct page *page)
+static inline struct page *dma_to_page(struct device *dev, dma_addr_t addr)
 {
-        return (dma_addr_t)__pfn_to_bus(page_to_pfn(page));
+        return pfn_to_page(__bus_to_pfn(addr));
 }
-#else
-#error "this machine class needs to define __arch_page_to_dma to use HIGHMEM"
-#endif
 static inline void *dma_to_virt(struct device *dev, dma_addr_t addr)
 {
@@ -45,6 +40,11 @@ static inline dma_addr_t page_to_dma(struct device *dev, struct page *page)
        return __arch_page_to_dma(dev, page);
 }
+static inline struct page *dma_to_page(struct device *dev, dma_addr_t addr)
+{
+        return __arch_dma_to_page(dev, addr);
+}
 static inline void *dma_to_virt(struct device *dev, dma_addr_t addr)
 {
        return __arch_dma_to_virt(dev, addr);
@@ -257,9 +257,11 @@ extern int dma_needs_bounce(struct device*, dma_addr_t, size_t);
 */
 extern dma_addr_t dma_map_single(struct device *, void *, size_t,
                enum dma_data_direction);
+extern void dma_unmap_single(struct device *, dma_addr_t, size_t,
+                enum dma_data_direction);
 extern dma_addr_t dma_map_page(struct device *, struct page *,
                unsigned long, size_t, enum dma_data_direction);
-extern void dma_unmap_single(struct device *, dma_addr_t, size_t,
+extern void dma_unmap_page(struct device *, dma_addr_t, size_t,
                enum dma_data_direction);
 /*
@@ -352,7 +354,6 @@ static inline void dma_unmap_single(struct device *dev, dma_addr_t handle,
 {
        /* nothing to do */
 }
-#endif /* CONFIG_DMABOUNCE */
 /**
 * dma_unmap_page - unmap a buffer previously mapped through dma_map_page()
@@ -371,8 +372,9 @@ static inline void dma_unmap_single(struct device *dev, dma_addr_t handle,
 static inline void dma_unmap_page(struct device *dev, dma_addr_t handle,
                size_t size, enum dma_data_direction dir)
 {
-        dma_unmap_single(dev, handle, size, dir);
+        /* nothing to do */
 }
+#endif /* CONFIG_DMABOUNCE */
 /**
 * dma_sync_single_range_for_cpu
diff --git a/arch/arm/include/asm/elf.h b/arch/arm/include/asm/elf.h
index c3b911ee9151..6aac3f5bb2f3 100644
--- a/arch/arm/include/asm/elf.h
+++ b/arch/arm/include/asm/elf.h
@@ -98,6 +98,9 @@ extern int elf_check_arch(const struct elf32_hdr *);
 extern int arm_elf_read_implies_exec(const struct elf32_hdr *, int);
 #define elf_read_implies_exec(ex,stk) arm_elf_read_implies_exec(&(ex), stk)
+int dump_task_regs(struct task_struct *t, elf_gregset_t *elfregs);
+#define ELF_CORE_COPY_TASK_REGS dump_task_regs
 #define USE_ELF_CORE_DUMP
 #define ELF_EXEC_PAGESIZE       4096
diff --git a/arch/arm/include/asm/hardware/coresight.h b/arch/arm/include/asm/hardware/coresight.h
new file mode 100644
index 000000000000..f82b25d4f73e
--- /dev/null
+++ b/arch/arm/include/asm/hardware/coresight.h
@@ -0,0 +1,165 @@
+/*
+ * linux/arch/arm/include/asm/hardware/coresight.h
+ *
+ * CoreSight components' registers
+ *
+ * Copyright (C) 2009 Nokia Corporation.
+ * Alexander Shishkin
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_HARDWARE_CORESIGHT_H
+#define __ASM_HARDWARE_CORESIGHT_H
+#define TRACER_ACCESSED_BIT     0
+#define TRACER_RUNNING_BIT      1
+#define TRACER_CYCLE_ACC_BIT    2
+#define TRACER_ACCESSED         BIT(TRACER_ACCESSED_BIT)
+#define TRACER_RUNNING          BIT(TRACER_RUNNING_BIT)
+#define TRACER_CYCLE_ACC        BIT(TRACER_CYCLE_ACC_BIT)
+struct tracectx {
+        unsigned int    etb_bufsz;
+        void __iomem    *etb_regs;
+        void __iomem    *etm_regs;
+        unsigned long   flags;
+        int             ncmppairs;
+        int             etm_portsz;
+        struct device   *dev;
+        struct clk      *emu_clk;
+        struct mutex    mutex;
+};
+#define TRACER_TIMEOUT 10000
+#define etm_writel(t, v, x) \
+        (__raw_writel((v), (t)->etm_regs + (x)))
+#define etm_readl(t, x) (__raw_readl((t)->etm_regs + (x)))
+/* CoreSight Management Registers */
+#define CSMR_LOCKACCESS 0xfb0
+#define CSMR_LOCKSTATUS 0xfb4
+#define CSMR_AUTHSTATUS 0xfb8
+#define CSMR_DEVID      0xfc8
+#define CSMR_DEVTYPE    0xfcc
+/* CoreSight Component Registers */
+#define CSCR_CLASS      0xff4
+#define CSCR_PRSR       0x314
+#define UNLOCK_MAGIC    0xc5acce55
+/* ETM control register, "ETM Architecture", 3.3.1 */
+#define ETMR_CTRL               0
+#define ETMCTRL_POWERDOWN       1
+#define ETMCTRL_PROGRAM         (1 << 10)
+#define ETMCTRL_PORTSEL         (1 << 11)
+#define ETMCTRL_DO_CONTEXTID    (3 << 14)
+#define ETMCTRL_PORTMASK1       (7 << 4)
+#define ETMCTRL_PORTMASK2       (1 << 21)
+#define ETMCTRL_PORTMASK        (ETMCTRL_PORTMASK1 | ETMCTRL_PORTMASK2)
+#define ETMCTRL_PORTSIZE(x) ((((x) & 7) << 4) | (!!((x) & 8)) << 21)
+#define ETMCTRL_DO_CPRT         (1 << 1)
+#define ETMCTRL_DATAMASK        (3 << 2)
+#define ETMCTRL_DATA_DO_DATA    (1 << 2)
+#define ETMCTRL_DATA_DO_ADDR    (1 << 3)
+#define ETMCTRL_DATA_DO_BOTH    (ETMCTRL_DATA_DO_DATA | ETMCTRL_DATA_DO_ADDR)
+#define ETMCTRL_BRANCH_OUTPUT   (1 << 8)
+#define ETMCTRL_CYCLEACCURATE   (1 << 12)
+/* ETM configuration code register */
+#define ETMR_CONFCODE           (0x04)
+/* ETM trace start/stop resource control register */
+#define ETMR_TRACESSCTRL        (0x18)
+/* ETM trigger event register */
+#define ETMR_TRIGEVT            (0x08)
+/* address access type register bits, "ETM architecture",
+ * table 3-27 */
+/* - access type */
+#define ETMAAT_IFETCH           0
+#define ETMAAT_IEXEC            1
+#define ETMAAT_IEXECPASS        2
+#define ETMAAT_IEXECFAIL        3
+#define ETMAAT_DLOADSTORE       4
+#define ETMAAT_DLOAD            5
+#define ETMAAT_DSTORE           6
+/* - comparison access size */
+#define ETMAAT_JAVA             (0 << 3)
+#define ETMAAT_THUMB            (1 << 3)
+#define ETMAAT_ARM              (3 << 3)
+/* - data value comparison control */
+#define ETMAAT_NOVALCMP         (0 << 5)
+#define ETMAAT_VALMATCH         (1 << 5)
+#define ETMAAT_VALNOMATCH       (3 << 5)
+/* - exact match */
+#define ETMAAT_EXACTMATCH       (1 << 7)
+/* - context id comparator control */
+#define ETMAAT_IGNCONTEXTID     (0 << 8)
+#define ETMAAT_VALUE1           (1 << 8)
+#define ETMAAT_VALUE2           (2 << 8)
+#define ETMAAT_VALUE3           (3 << 8)
+/* - security level control */
+#define ETMAAT_IGNSECURITY      (0 << 10)
+#define ETMAAT_NSONLY           (1 << 10)
+#define ETMAAT_SONLY            (2 << 10)
+#define ETMR_COMP_VAL(x)        (0x40 + (x) * 4)
+#define ETMR_COMP_ACC_TYPE(x)   (0x80 + (x) * 4)
+/* ETM status register, "ETM Architecture", 3.3.2 */
+#define ETMR_STATUS             (0x10)
+#define ETMST_OVERFLOW          (1 << 0)
+#define ETMST_PROGBIT           (1 << 1)
+#define ETMST_STARTSTOP         (1 << 2)
+#define ETMST_TRIGGER           (1 << 3)
+#define etm_progbit(t)          (etm_readl((t), ETMR_STATUS) & ETMST_PROGBIT)
+#define etm_started(t)          (etm_readl((t), ETMR_STATUS) & ETMST_STARTSTOP)
+#define etm_triggered(t)        (etm_readl((t), ETMR_STATUS) & ETMST_TRIGGER)
+#define ETMR_TRACEENCTRL2       0x1c
+#define ETMR_TRACEENCTRL        0x24
+#define ETMTE_INCLEXCL          (1 << 24)
+#define ETMR_TRACEENEVT         0x20
+#define ETMCTRL_OPTS            (ETMCTRL_DO_CPRT | \
+                                ETMCTRL_DATA_DO_ADDR | \
+                                ETMCTRL_BRANCH_OUTPUT | \
+                                ETMCTRL_DO_CONTEXTID)
+/* ETB registers, "CoreSight Components TRM", 9.3 */
+#define ETBR_DEPTH              0x04
+#define ETBR_STATUS             0x0c
+#define ETBR_READMEM            0x10
+#define ETBR_READADDR           0x14
+#define ETBR_WRITEADDR          0x18
+#define ETBR_TRIGGERCOUNT       0x1c
+#define ETBR_CTRL               0x20
+#define ETBR_FORMATTERCTRL      0x304
+#define ETBFF_ENFTC             1
+#define ETBFF_ENFCONT           (1 << 1)
+#define ETBFF_FONFLIN           (1 << 4)
+#define ETBFF_MANUAL_FLUSH      (1 << 6)
+#define ETBFF_TRIGIN            (1 << 8)
+#define ETBFF_TRIGEVT           (1 << 9)
+#define ETBFF_TRIGFL            (1 << 10)
+#define etb_writel(t, v, x) \
+        (__raw_writel((v), (t)->etb_regs + (x)))
+#define etb_readl(t, x) (__raw_readl((t)->etb_regs + (x)))
+#define etm_lock(t) do { etm_writel((t), 0, CSMR_LOCKACCESS); } while (0)
+#define etm_unlock(t) \
+        do { etm_writel((t), UNLOCK_MAGIC, CSMR_LOCKACCESS); } while (0)
+#define etb_lock(t) do { etb_writel((t), 0, CSMR_LOCKACCESS); } while (0)
+#define etb_unlock(t) \
+        do { etb_writel((t), UNLOCK_MAGIC, CSMR_LOCKACCESS); } while (0)
+#endif /* __ASM_HARDWARE_CORESIGHT_H */
diff --git a/arch/arm/include/asm/kmap_types.h b/arch/arm/include/asm/kmap_types.h
index d16ec97ec9a9..c019949a5189 100644
--- a/arch/arm/include/asm/kmap_types.h
+++ b/arch/arm/include/asm/kmap_types.h
@@ -22,4 +22,10 @@ enum km_type {
        KM_TYPE_NR
 };
+#ifdef CONFIG_DEBUG_HIGHMEM
+#define KM_NMI          (-1)
+#define KM_NMI_PTE      (-1)
+#define KM_IRQ_PTE      (-1)
+#endif
 #endif
diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h
index cefedf062138..5421d82a2572 100644
--- a/arch/arm/include/asm/memory.h
+++ b/arch/arm/include/asm/memory.h
@@ -125,8 +125,10 @@
 * private definitions which should NOT be used outside memory.h
 * files.  Use virt_to_phys/phys_to_virt/__pa/__va instead.
 */
+#ifndef __virt_to_phys
 #define __virt_to_phys(x)       ((x) - PAGE_OFFSET + PHYS_OFFSET)
 #define __phys_to_virt(x)       ((x) - PHYS_OFFSET + PAGE_OFFSET)
+#endif
 /*
 * Convert a physical address to a Page Frame Number and back
@@ -134,6 +136,12 @@
 #define __phys_to_pfn(paddr)    ((paddr) >> PAGE_SHIFT)
 #define __pfn_to_phys(pfn)      ((pfn) << PAGE_SHIFT)
+/*
+ * Convert a page to/from a physical address
+ */
+#define page_to_phys(page)      (__pfn_to_phys(page_to_pfn(page)))
+#define phys_to_page(phys)      (pfn_to_page(__phys_to_pfn(phys)))
 #ifndef __ASSEMBLY__
 /*
@@ -194,7 +202,8 @@ static inline void *phys_to_virt(unsigned long x)
 #ifndef __virt_to_bus
 #define __virt_to_bus   __virt_to_phys
 #define __bus_to_virt   __phys_to_virt
-#define __pfn_to_bus(x) ((x) << PAGE_SHIFT)
+#define __pfn_to_bus(x) __pfn_to_phys(x)
+#define __bus_to_pfn(x) __phys_to_pfn(x)
 #endif
 static inline __deprecated unsigned long virt_to_bus(void *x)
@@ -293,11 +302,6 @@ static inline __deprecated void *bus_to_virt(unsigned long x)
 #endif /* !CONFIG_DISCONTIGMEM */
 /*
- * For BIO.  "will die".  Kill me when bio_to_phys() and bvec_to_phys() die.
- */
-#define page_to_phys(page)      (page_to_pfn(page) << PAGE_SHIFT)
-/*
 * Optional coherency support.  Currently used only by selected
 * Intel XSC3-based systems.
 */
diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h
index 201ccaa11f61..11397687f42c 100644
--- a/arch/arm/include/asm/pgtable.h
+++ b/arch/arm/include/asm/pgtable.h
@@ -304,13 +304,23 @@ PTE_BIT_FUNC(mkyoung,   |= L_PTE_YOUNG);
 static inline pte_t pte_mkspecial(pte_t pte) { return pte; }
+#define __pgprot_modify(prot,mask,bits)         \
+        __pgprot((pgprot_val(prot) & ~(mask)) | (bits))
 /*
 * Mark the prot value as uncacheable and unbufferable.
 */
 #define pgprot_noncached(prot) \
-        __pgprot((pgprot_val(prot) & ~L_PTE_MT_MASK) | L_PTE_MT_UNCACHED)
+        __pgprot_modify(prot, L_PTE_MT_MASK, L_PTE_MT_UNCACHED)
 #define pgprot_writecombine(prot) \
-        __pgprot((pgprot_val(prot) & ~L_PTE_MT_MASK) | L_PTE_MT_BUFFERABLE)
+        __pgprot_modify(prot, L_PTE_MT_MASK, L_PTE_MT_BUFFERABLE)
+#if __LINUX_ARM_ARCH__ >= 7
+#define pgprot_dmacoherent(prot) \
+        __pgprot_modify(prot, L_PTE_MT_MASK|L_PTE_EXEC, L_PTE_MT_BUFFERABLE)
+#else
+#define pgprot_dmacoherent(prot) \
+        __pgprot_modify(prot, L_PTE_MT_MASK|L_PTE_EXEC, L_PTE_MT_UNCACHED)
+#endif
 #define pmd_none(pmd)           (!pmd_val(pmd))
 #define pmd_present(pmd)        (pmd_val(pmd))
diff --git a/arch/arm/include/asm/swab.h b/arch/arm/include/asm/swab.h
index ca2bf2f6d6ea..9997ad20eff1 100644
--- a/arch/arm/include/asm/swab.h
+++ b/arch/arm/include/asm/swab.h
@@ -22,6 +22,24 @@
 #  define __SWAB_64_THRU_32__
 #endif
+#if defined(__KERNEL__) && __LINUX_ARM_ARCH__ >= 6
+static inline __attribute_const__ __u16 __arch_swab16(__u16 x)
+{
+        __asm__ ("rev16 %0, %1" : "=r" (x) : "r" (x));
+        return x;
+}
+#define __arch_swab16 __arch_swab16
+static inline __attribute_const__ __u32 __arch_swab32(__u32 x)
+{
+        __asm__ ("rev %0, %1" : "=r" (x) : "r" (x));
+        return x;
+}
+#define __arch_swab32 __arch_swab32
+#else
 static inline __attribute_const__ __u32 __arch_swab32(__u32 x)
 {
        __u32 t;
@@ -48,3 +66,4 @@ static inline __attribute_const__ __u32 __arch_swab32(__u32 x)
 #endif
+#endif
diff --git a/arch/arm/include/asm/system.h b/arch/arm/include/asm/system.h
index d65b2f5bf41f..058e7e90881d 100644
--- a/arch/arm/include/asm/system.h
+++ b/arch/arm/include/asm/system.h
@@ -138,21 +138,26 @@ extern unsigned int user_debug;
 #define dmb() __asm__ __volatile__ ("" : : : "memory")
 #endif
-#ifndef CONFIG_SMP
+#if __LINUX_ARM_ARCH__ >= 7 || defined(CONFIG_SMP)
+#define mb()            dmb()
+#define rmb()           dmb()
+#define wmb()           dmb()
+#else
 #define mb()    do { if (arch_is_coherent()) dmb(); else barrier(); } while (0)
 #define rmb()   do { if (arch_is_coherent()) dmb(); else barrier(); } while (0)
 #define wmb()   do { if (arch_is_coherent()) dmb(); else barrier(); } while (0)
+#endif
+#ifndef CONFIG_SMP
 #define smp_mb()        barrier()
 #define smp_rmb()       barrier()
 #define smp_wmb()       barrier()
 #else
-#define mb()            dmb()
+#define smp_mb()        mb()
-#define rmb()           dmb()
+#define smp_rmb()       rmb()
-#define wmb()           dmb()
+#define smp_wmb()       wmb()
-#define smp_mb()        dmb()
-#define smp_rmb()       dmb()
-#define smp_wmb()       dmb()
 #endif
 #define read_barrier_depends()          do { } while(0)
 #define smp_read_barrier_depends()      do { } while(0)
diff --git a/arch/arm/include/asm/tlbflush.h b/arch/arm/include/asm/tlbflush.h
index a45ab5dd8255..c2f1605de359 100644
--- a/arch/arm/include/asm/tlbflush.h
+++ b/arch/arm/include/asm/tlbflush.h
@@ -350,7 +350,7 @@ static inline void local_flush_tlb_mm(struct mm_struct *mm)
        if (tlb_flag(TLB_WB))
                dsb();
-        if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(mm))) {
+        if (cpumask_test_cpu(get_cpu(), mm_cpumask(mm))) {
                if (tlb_flag(TLB_V3_FULL))
                        asm("mcr p15, 0, %0, c6, c0, 0" : : "r" (zero) : "cc");
                if (tlb_flag(TLB_V4_U_FULL))
@@ -360,6 +360,7 @@ static inline void local_flush_tlb_mm(struct mm_struct *mm)
                if (tlb_flag(TLB_V4_I_FULL))
                        asm("mcr p15, 0, %0, c8, c5, 0" : : "r" (zero) : "cc");
        }
+        put_cpu();
        if (tlb_flag(TLB_V6_U_ASID))
                asm("mcr p15, 0, %0, c8, c7, 2" : : "r" (asid) : "cc");
diff --git a/arch/arm/include/asm/unistd.h b/arch/arm/include/asm/unistd.h
index 7020217fc49f..4e506d09e5f9 100644
--- a/arch/arm/include/asm/unistd.h
+++ b/arch/arm/include/asm/unistd.h
@@ -403,6 +403,15 @@
 #define __ARM_NR_set_tls                (__ARM_NR_BASE+5)
 /*
+ * *NOTE*: This is a ghost syscall private to the kernel.  Only the
+ * __kuser_cmpxchg code in entry-armv.S should be aware of its
+ * existence.  Don't ever use this from user code.
+ */
+#ifdef __KERNEL__
+#define __ARM_NR_cmpxchg                (__ARM_NR_BASE+0x00fff0)
+#endif
+/*
 * The following syscalls are obsolete and no longer available for EABI.
 */
 #if defined(__ARM_EABI__) && !defined(__KERNEL__)
diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
index 79087dd6d869..e7ccf7e697ce 100644
--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@@ -17,6 +17,8 @@ obj-y		:= compat.o elf.o entry-armv.o entry-common.o irq.o \
                   process.o ptrace.o return_address.o setup.o signal.o \
                   sys_arm.o stacktrace.o time.o traps.o
+obj-$(CONFIG_OC_ETM)            += etm.o
 obj-$(CONFIG_ISA_DMA_API)       += dma.o
 obj-$(CONFIG_ARCH_ACORN)        += ecard.o 
 obj-$(CONFIG_FIQ)               += fiq.o
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index 322410be573c..d2903e3bc861 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -21,6 +21,7 @@
 #include <mach/entry-macro.S>
 #include <asm/thread_notify.h>
 #include <asm/unwind.h>
+#include <asm/unistd.h>
 #include "entry-header.S"
@@ -608,33 +609,33 @@ call_fpe:
 THUMB( add     pc, r8                  )
        nop
-        W(mov)  pc, lr                          @ CP#0
+        movw_pc lr                              @ CP#0
        W(b)    do_fpe                          @ CP#1 (FPE)
        W(b)    do_fpe                          @ CP#2 (FPE)
-        W(mov)  pc, lr                          @ CP#3
+        movw_pc lr                              @ CP#3
 #ifdef CONFIG_CRUNCH
        b       crunch_task_enable              @ CP#4 (MaverickCrunch)
        b       crunch_task_enable              @ CP#5 (MaverickCrunch)
        b       crunch_task_enable              @ CP#6 (MaverickCrunch)
 #else
-        W(mov)  pc, lr                          @ CP#4
+        movw_pc lr                              @ CP#4
-        W(mov)  pc, lr                          @ CP#5
+        movw_pc lr                              @ CP#5
-        W(mov)  pc, lr                          @ CP#6
+        movw_pc lr                              @ CP#6
 #endif
-        W(mov)  pc, lr                          @ CP#7
+        movw_pc lr                              @ CP#7
-        W(mov)  pc, lr                          @ CP#8
+        movw_pc lr                              @ CP#8
-        W(mov)  pc, lr                          @ CP#9
+        movw_pc lr                              @ CP#9
 #ifdef CONFIG_VFP
        W(b)    do_vfp                          @ CP#10 (VFP)
        W(b)    do_vfp                          @ CP#11 (VFP)
 #else
-        W(mov)  pc, lr                          @ CP#10 (VFP)
+        movw_pc lr                              @ CP#10 (VFP)
-        W(mov)  pc, lr                          @ CP#11 (VFP)
+        movw_pc lr                              @ CP#11 (VFP)
 #endif
-        W(mov)  pc, lr                          @ CP#12
+        movw_pc lr                              @ CP#12
-        W(mov)  pc, lr                          @ CP#13
+        movw_pc lr                              @ CP#13
-        W(mov)  pc, lr                          @ CP#14 (Debug)
+        movw_pc lr                              @ CP#14 (Debug)
-        W(mov)  pc, lr                          @ CP#15 (Control)
+        movw_pc lr                              @ CP#15 (Control)
 #ifdef CONFIG_NEON
        .align  6
@@ -908,10 +909,10 @@ __kuser_cmpxchg:				@ 0xffff0fc0
         * A special ghost syscall is used for that (see traps.c).
         */
        stmfd   sp!, {r7, lr}
-        mov     r7, #0xff00             @ 0xfff0 into r7 for EABI
+        ldr     r7, =1f                 @ it's 20 bits
-        orr     r7, r7, #0xf0
+        swi     __ARM_NR_cmpxchg
-        swi     #0x9ffff0
        ldmfd   sp!, {r7, pc}
+1:      .word   __ARM_NR_cmpxchg
 #elif __LINUX_ARM_ARCH__ < 6
diff --git a/arch/arm/kernel/entry-header.S b/arch/arm/kernel/entry-header.S
index ac34c0d9384b..7e9ed1eea40a 100644
--- a/arch/arm/kernel/entry-header.S
+++ b/arch/arm/kernel/entry-header.S
@@ -110,6 +110,13 @@
        mov     \rd, sp, lsr #13
        mov     \rd, \rd, lsl #13
        .endm
+        @
+        @ 32-bit wide "mov pc, reg"
+        @
+        .macro  movw_pc, reg
+        mov     pc, \reg
+        .endm
 #else   /* CONFIG_THUMB2_KERNEL */
        .macro  svc_exit, rpsr
        clrex                                   @ clear the exclusive monitor
@@ -146,6 +153,14 @@
        lsr     \rd, \rd, #13
        mov     \rd, \rd, lsl #13
        .endm
+        @
+        @ 32-bit wide "mov pc, reg"
+        @
+        .macro  movw_pc, reg
+        mov     pc, \reg
+        nop
+        .endm
 #endif  /* !CONFIG_THUMB2_KERNEL */
 /*
diff --git a/arch/arm/kernel/etm.c b/arch/arm/kernel/etm.c
new file mode 100644
index 000000000000..827753966301
--- /dev/null
+++ b/arch/arm/kernel/etm.c
@@ -0,0 +1,641 @@
+/*
+ * linux/arch/arm/kernel/etm.c
+ *
+ * Driver for ARM's Embedded Trace Macrocell and Embedded Trace Buffer.
+ *
+ * Copyright (C) 2009 Nokia Corporation.
+ * Alexander Shishkin
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/io.h>
+#include <linux/sysrq.h>
+#include <linux/device.h>
+#include <linux/clk.h>
+#include <linux/amba/bus.h>
+#include <linux/fs.h>
+#include <linux/uaccess.h>
+#include <linux/miscdevice.h>
+#include <linux/vmalloc.h>
+#include <linux/mutex.h>
+#include <asm/hardware/coresight.h>
+#include <asm/sections.h>
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Alexander Shishkin");
+static struct tracectx tracer;
+static inline bool trace_isrunning(struct tracectx *t)
+{
+        return !!(t->flags & TRACER_RUNNING);
+}
+static int etm_setup_address_range(struct tracectx *t, int n,
+                unsigned long start, unsigned long end, int exclude, int data)
+{
+        u32 flags = ETMAAT_ARM | ETMAAT_IGNCONTEXTID | ETMAAT_NSONLY | \
+                    ETMAAT_NOVALCMP;
+        if (n < 1 || n > t->ncmppairs)
+                return -EINVAL;
+        /* comparators and ranges are numbered starting with 1 as opposed
+         * to bits in a word */
+        n--;
+        if (data)
+                flags |= ETMAAT_DLOADSTORE;
+        else
+                flags |= ETMAAT_IEXEC;
+        /* first comparator for the range */
+        etm_writel(t, flags, ETMR_COMP_ACC_TYPE(n * 2));
+        etm_writel(t, start, ETMR_COMP_VAL(n * 2));
+        /* second comparator is right next to it */
+        etm_writel(t, flags, ETMR_COMP_ACC_TYPE(n * 2 + 1));
+        etm_writel(t, end, ETMR_COMP_VAL(n * 2 + 1));
+        flags = exclude ? ETMTE_INCLEXCL : 0;
+        etm_writel(t, flags | (1 << n), ETMR_TRACEENCTRL);
+        return 0;
+}
+static int trace_start(struct tracectx *t)
+{
+        u32 v;
+        unsigned long timeout = TRACER_TIMEOUT;
+        etb_unlock(t);
+        etb_writel(t, 0, ETBR_FORMATTERCTRL);
+        etb_writel(t, 1, ETBR_CTRL);
+        etb_lock(t);
+        /* configure etm */
+        v = ETMCTRL_OPTS | ETMCTRL_PROGRAM | ETMCTRL_PORTSIZE(t->etm_portsz);
+        if (t->flags & TRACER_CYCLE_ACC)
+                v |= ETMCTRL_CYCLEACCURATE;
+        etm_unlock(t);
+        etm_writel(t, v, ETMR_CTRL);
+        while (!(etm_readl(t, ETMR_CTRL) & ETMCTRL_PROGRAM) && --timeout)
+                ;
+        if (!timeout) {
+                dev_dbg(t->dev, "Waiting for progbit to assert timed out\n");
+                etm_lock(t);
+                return -EFAULT;
+        }
+        etm_setup_address_range(t, 1, (unsigned long)_stext,
+                        (unsigned long)_etext, 0, 0);
+        etm_writel(t, 0, ETMR_TRACEENCTRL2);
+        etm_writel(t, 0, ETMR_TRACESSCTRL);
+        etm_writel(t, 0x6f, ETMR_TRACEENEVT);
+        v &= ~ETMCTRL_PROGRAM;
+        v |= ETMCTRL_PORTSEL;
+        etm_writel(t, v, ETMR_CTRL);
+        timeout = TRACER_TIMEOUT;
+        while (etm_readl(t, ETMR_CTRL) & ETMCTRL_PROGRAM && --timeout)
+                ;
+        if (!timeout) {
+                dev_dbg(t->dev, "Waiting for progbit to deassert timed out\n");
+                etm_lock(t);
+                return -EFAULT;
+        }
+        etm_lock(t);
+        t->flags |= TRACER_RUNNING;
+        return 0;
+}
+static int trace_stop(struct tracectx *t)
+{
+        unsigned long timeout = TRACER_TIMEOUT;
+        etm_unlock(t);
+        etm_writel(t, 0x440, ETMR_CTRL);
+        while (!(etm_readl(t, ETMR_CTRL) & ETMCTRL_PROGRAM) && --timeout)
+                ;
+        if (!timeout) {
+                dev_dbg(t->dev, "Waiting for progbit to assert timed out\n");
+                etm_lock(t);
+                return -EFAULT;
+        }
+        etm_lock(t);
+        etb_unlock(t);
+        etb_writel(t, ETBFF_MANUAL_FLUSH, ETBR_FORMATTERCTRL);
+        timeout = TRACER_TIMEOUT;
+        while (etb_readl(t, ETBR_FORMATTERCTRL) &
+                        ETBFF_MANUAL_FLUSH && --timeout)
+                ;
+        if (!timeout) {
+                dev_dbg(t->dev, "Waiting for formatter flush to commence "
+                                "timed out\n");
+                etb_lock(t);
+                return -EFAULT;
+        }
+        etb_writel(t, 0, ETBR_CTRL);
+        etb_lock(t);
+        t->flags &= ~TRACER_RUNNING;
+        return 0;
+}
+static int etb_getdatalen(struct tracectx *t)
+{
+        u32 v;
+        int rp, wp;
+        v = etb_readl(t, ETBR_STATUS);
+        if (v & 1)
+                return t->etb_bufsz;
+        rp = etb_readl(t, ETBR_READADDR);
+        wp = etb_readl(t, ETBR_WRITEADDR);
+        if (rp > wp) {
+                etb_writel(t, 0, ETBR_READADDR);
+                etb_writel(t, 0, ETBR_WRITEADDR);
+                return 0;
+        }
+        return wp - rp;
+}
+/* sysrq+v will always stop the running trace and leave it at that */
+static void etm_dump(void)
+{
+        struct tracectx *t = &tracer;
+        u32 first = 0;
+        int length;
+        if (!t->etb_regs) {
+                printk(KERN_INFO "No tracing hardware found\n");
+                return;
+        }
+        if (trace_isrunning(t))
+                trace_stop(t);
+        etb_unlock(t);
+        length = etb_getdatalen(t);
+        if (length == t->etb_bufsz)
+                first = etb_readl(t, ETBR_WRITEADDR);
+        etb_writel(t, first, ETBR_READADDR);
+        printk(KERN_INFO "Trace buffer contents length: %d\n", length);
+        printk(KERN_INFO "--- ETB buffer begin ---\n");
+        for (; length; length--)
+                printk("%08x", cpu_to_be32(etb_readl(t, ETBR_READMEM)));
+        printk(KERN_INFO "\n--- ETB buffer end ---\n");
+        /* deassert the overflow bit */
+        etb_writel(t, 1, ETBR_CTRL);
+        etb_writel(t, 0, ETBR_CTRL);
+        etb_writel(t, 0, ETBR_TRIGGERCOUNT);
+        etb_writel(t, 0, ETBR_READADDR);
+        etb_writel(t, 0, ETBR_WRITEADDR);
+        etb_lock(t);
+}
+static void sysrq_etm_dump(int key, struct tty_struct *tty)
+{
+        dev_dbg(tracer.dev, "Dumping ETB buffer\n");
+        etm_dump();
+}
+static struct sysrq_key_op sysrq_etm_op = {
+        .handler = sysrq_etm_dump,
+        .help_msg = "ETM buffer dump",
+        .action_msg = "etm",
+};
+static int etb_open(struct inode *inode, struct file *file)
+{
+        if (!tracer.etb_regs)
+                return -ENODEV;
+        file->private_data = &tracer;
+        return nonseekable_open(inode, file);
+}
+static ssize_t etb_read(struct file *file, char __user *data,
+                size_t len, loff_t *ppos)
+{
+        int total, i;
+        long length;
+        struct tracectx *t = file->private_data;
+        u32 first = 0;
+        u32 *buf;
+        mutex_lock(&t->mutex);
+        if (trace_isrunning(t)) {
+                length = 0;
+                goto out;
+        }
+        etb_unlock(t);
+        total = etb_getdatalen(t);
+        if (total == t->etb_bufsz)
+                first = etb_readl(t, ETBR_WRITEADDR);
+        etb_writel(t, first, ETBR_READADDR);
+        length = min(total * 4, (int)len);
+        buf = vmalloc(length);
+        dev_dbg(t->dev, "ETB buffer length: %d\n", total);
+        dev_dbg(t->dev, "ETB status reg: %x\n", etb_readl(t, ETBR_STATUS));
+        for (i = 0; i < length / 4; i++)
+                buf[i] = etb_readl(t, ETBR_READMEM);
+        /* the only way to deassert overflow bit in ETB status is this */
+        etb_writel(t, 1, ETBR_CTRL);
+        etb_writel(t, 0, ETBR_CTRL);
+        etb_writel(t, 0, ETBR_WRITEADDR);
+        etb_writel(t, 0, ETBR_READADDR);
+        etb_writel(t, 0, ETBR_TRIGGERCOUNT);
+        etb_lock(t);
+        length -= copy_to_user(data, buf, length);
+        vfree(buf);
+out:
+        mutex_unlock(&t->mutex);
+        return length;
+}
+static int etb_release(struct inode *inode, struct file *file)
+{
+        /* there's nothing to do here, actually */
+        return 0;
+}
+static const struct file_operations etb_fops = {
+        .owner = THIS_MODULE,
+        .read = etb_read,
+        .open = etb_open,
+        .release = etb_release,
+};
+static struct miscdevice etb_miscdev = {
+        .name = "tracebuf",
+        .minor = 0,
+        .fops = &etb_fops,
+};
+static int __init etb_probe(struct amba_device *dev, struct amba_id *id)
+{
+        struct tracectx *t = &tracer;
+        int ret = 0;
+        ret = amba_request_regions(dev, NULL);
+        if (ret)
+                goto out;
+        t->etb_regs = ioremap_nocache(dev->res.start, resource_size(&dev->res));
+        if (!t->etb_regs) {
+                ret = -ENOMEM;
+                goto out_release;
+        }
+        amba_set_drvdata(dev, t);
+        etb_miscdev.parent = &dev->dev;
+        ret = misc_register(&etb_miscdev);
+        if (ret)
+                goto out_unmap;
+        t->emu_clk = clk_get(&dev->dev, "emu_src_ck");
+        if (IS_ERR(t->emu_clk)) {
+                dev_dbg(&dev->dev, "Failed to obtain emu_src_ck.\n");
+                return -EFAULT;
+        }
+        clk_enable(t->emu_clk);
+        etb_unlock(t);
+        t->etb_bufsz = etb_readl(t, ETBR_DEPTH);
+        dev_dbg(&dev->dev, "Size: %x\n", t->etb_bufsz);
+        /* make sure trace capture is disabled */
+        etb_writel(t, 0, ETBR_CTRL);
+        etb_writel(t, 0x1000, ETBR_FORMATTERCTRL);
+        etb_lock(t);
+        dev_dbg(&dev->dev, "ETB AMBA driver initialized.\n");
+out:
+        return ret;
+out_unmap:
+        amba_set_drvdata(dev, NULL);
+        iounmap(t->etb_regs);
+out_release:
+        amba_release_regions(dev);
+        return ret;
+}
+static int etb_remove(struct amba_device *dev)
+{
+        struct tracectx *t = amba_get_drvdata(dev);
+        amba_set_drvdata(dev, NULL);
+        iounmap(t->etb_regs);
+        t->etb_regs = NULL;
+        clk_disable(t->emu_clk);
+        clk_put(t->emu_clk);
+        amba_release_regions(dev);
+        return 0;
+}
+static struct amba_id etb_ids[] = {
+        {
+                .id     = 0x0003b907,
+                .mask   = 0x0007ffff,
+        },
+        { 0, 0 },
+};
+static struct amba_driver etb_driver = {
+        .drv            = {
+                .name   = "etb",
+                .owner  = THIS_MODULE,
+        },
+        .probe          = etb_probe,
+        .remove         = etb_remove,
+        .id_table       = etb_ids,
+};
+/* use a sysfs file "trace_running" to start/stop tracing */
+static ssize_t trace_running_show(struct kobject *kobj,
+                                  struct kobj_attribute *attr,
+                                  char *buf)
+{
+        return sprintf(buf, "%x\n", trace_isrunning(&tracer));
+}
+static ssize_t trace_running_store(struct kobject *kobj,
+                                   struct kobj_attribute *attr,
+                                   const char *buf, size_t n)
+{
+        unsigned int value;
+        int ret;
+        if (sscanf(buf, "%u", &value) != 1)
+                return -EINVAL;
+        mutex_lock(&tracer.mutex);
+        ret = value ? trace_start(&tracer) : trace_stop(&tracer);
+        mutex_unlock(&tracer.mutex);
+        return ret ? : n;
+}
+static struct kobj_attribute trace_running_attr =
+        __ATTR(trace_running, 0644, trace_running_show, trace_running_store);
+static ssize_t trace_info_show(struct kobject *kobj,
+                                  struct kobj_attribute *attr,
+                                  char *buf)
+{
+        u32 etb_wa, etb_ra, etb_st, etb_fc, etm_ctrl, etm_st;
+        int datalen;
+        etb_unlock(&tracer);
+        datalen = etb_getdatalen(&tracer);
+        etb_wa = etb_readl(&tracer, ETBR_WRITEADDR);
+        etb_ra = etb_readl(&tracer, ETBR_READADDR);
+        etb_st = etb_readl(&tracer, ETBR_STATUS);
+        etb_fc = etb_readl(&tracer, ETBR_FORMATTERCTRL);
+        etb_lock(&tracer);
+        etm_unlock(&tracer);
+        etm_ctrl = etm_readl(&tracer, ETMR_CTRL);
+        etm_st = etm_readl(&tracer, ETMR_STATUS);
+        etm_lock(&tracer);
+        return sprintf(buf, "Trace buffer len: %d\nComparator pairs: %d\n"
+                        "ETBR_WRITEADDR:\t%08x\n"
+                        "ETBR_READADDR:\t%08x\n"
+                        "ETBR_STATUS:\t%08x\n"
+                        "ETBR_FORMATTERCTRL:\t%08x\n"
+                        "ETMR_CTRL:\t%08x\n"
+                        "ETMR_STATUS:\t%08x\n",
+                        datalen,
+                        tracer.ncmppairs,
+                        etb_wa,
+                        etb_ra,
+                        etb_st,
+                        etb_fc,
+                        etm_ctrl,
+                        etm_st
+                        );
+}
+static struct kobj_attribute trace_info_attr =
+        __ATTR(trace_info, 0444, trace_info_show, NULL);
+static ssize_t trace_mode_show(struct kobject *kobj,
+                                  struct kobj_attribute *attr,
+                                  char *buf)
+{
+        return sprintf(buf, "%d %d\n",
+                        !!(tracer.flags & TRACER_CYCLE_ACC),
+                        tracer.etm_portsz);
+}
+static ssize_t trace_mode_store(struct kobject *kobj,
+                                   struct kobj_attribute *attr,
+                                   const char *buf, size_t n)
+{
+        unsigned int cycacc, portsz;
+        if (sscanf(buf, "%u %u", &cycacc, &portsz) != 2)
+                return -EINVAL;
+        mutex_lock(&tracer.mutex);
+        if (cycacc)
+                tracer.flags |= TRACER_CYCLE_ACC;
+        else
+                tracer.flags &= ~TRACER_CYCLE_ACC;
+        tracer.etm_portsz = portsz & 0x0f;
+        mutex_unlock(&tracer.mutex);
+        return n;
+}
+static struct kobj_attribute trace_mode_attr =
+        __ATTR(trace_mode, 0644, trace_mode_show, trace_mode_store);
+static int __init etm_probe(struct amba_device *dev, struct amba_id *id)
+{
+        struct tracectx *t = &tracer;
+        int ret = 0;
+        if (t->etm_regs) {
+                dev_dbg(&dev->dev, "ETM already initialized\n");
+                ret = -EBUSY;
+                goto out;
+        }
+        ret = amba_request_regions(dev, NULL);
+        if (ret)
+                goto out;
+        t->etm_regs = ioremap_nocache(dev->res.start, resource_size(&dev->res));
+        if (!t->etm_regs) {
+                ret = -ENOMEM;
+                goto out_release;
+        }
+        amba_set_drvdata(dev, t);
+        mutex_init(&t->mutex);
+        t->dev = &dev->dev;
+        t->flags = TRACER_CYCLE_ACC;
+        t->etm_portsz = 1;
+        etm_unlock(t);
+        ret = etm_readl(t, CSCR_PRSR);
+        t->ncmppairs = etm_readl(t, ETMR_CONFCODE) & 0xf;
+        etm_writel(t, 0x440, ETMR_CTRL);
+        etm_lock(t);
+        ret = sysfs_create_file(&dev->dev.kobj,
+                        &trace_running_attr.attr);
+        if (ret)
+                goto out_unmap;
+        /* failing to create any of these two is not fatal */
+        ret = sysfs_create_file(&dev->dev.kobj, &trace_info_attr.attr);
+        if (ret)
+                dev_dbg(&dev->dev, "Failed to create trace_info in sysfs\n");
+        ret = sysfs_create_file(&dev->dev.kobj, &trace_mode_attr.attr);
+        if (ret)
+                dev_dbg(&dev->dev, "Failed to create trace_mode in sysfs\n");
+        dev_dbg(t->dev, "ETM AMBA driver initialized.\n");
+out:
+        return ret;
+out_unmap:
+        amba_set_drvdata(dev, NULL);
+        iounmap(t->etm_regs);
+out_release:
+        amba_release_regions(dev);
+        return ret;
+}
+static int etm_remove(struct amba_device *dev)
+{
+        struct tracectx *t = amba_get_drvdata(dev);
+        amba_set_drvdata(dev, NULL);
+        iounmap(t->etm_regs);
+        t->etm_regs = NULL;
+        amba_release_regions(dev);
+        sysfs_remove_file(&dev->dev.kobj, &trace_running_attr.attr);
+        sysfs_remove_file(&dev->dev.kobj, &trace_info_attr.attr);
+        sysfs_remove_file(&dev->dev.kobj, &trace_mode_attr.attr);
+        return 0;
+}
+static struct amba_id etm_ids[] = {
+        {
+                .id     = 0x0003b921,
+                .mask   = 0x0007ffff,
+        },
+        { 0, 0 },
+};
+static struct amba_driver etm_driver = {
+        .drv            = {
+                .name   = "etm",
+                .owner  = THIS_MODULE,
+        },
+        .probe          = etm_probe,
+        .remove         = etm_remove,
+        .id_table       = etm_ids,
+};
+static int __init etm_init(void)
+{
+        int retval;
+        retval = amba_driver_register(&etb_driver);
+        if (retval) {
+                printk(KERN_ERR "Failed to register etb\n");
+                return retval;
+        }
+        retval = amba_driver_register(&etm_driver);
+        if (retval) {
+                amba_driver_unregister(&etb_driver);
+                printk(KERN_ERR "Failed to probe etm\n");
+                return retval;
+        }
+        /* not being able to install this handler is not fatal */
+        (void)register_sysrq_key('v', &sysrq_etm_op);
+        return 0;
+}
+device_initcall(etm_init);
diff --git a/arch/arm/kernel/head-common.S b/arch/arm/kernel/head-common.S
index 885a7214418d..b9505aa267c0 100644
--- a/arch/arm/kernel/head-common.S
+++ b/arch/arm/kernel/head-common.S
@@ -97,7 +97,7 @@ __error_a:
        bl      printhex8
        adr     r0, str_a2
        bl      printascii
-        adr     r3, 3f
+        adr     r3, 4f
        ldmia   r3, {r4, r5, r6}                @ get machine desc list
        sub     r4, r3, r4                      @ get offset between virt&phys
        add     r5, r5, r4                      @ convert virt addresses to
diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c
index 790fbee92ec5..0d96d0171c05 100644
--- a/arch/arm/kernel/process.c
+++ b/arch/arm/kernel/process.c
@@ -328,6 +328,15 @@ copy_thread(unsigned long clone_flags, unsigned long stack_start,
 }
 /*
+ * Fill in the task's elfregs structure for a core dump.
+ */
+int dump_task_regs(struct task_struct *t, elf_gregset_t *elfregs)
+{
+        elf_core_copy_regs(elfregs, task_pt_regs(t));
+        return 1;
+}
+/*
 * fill in the fpe structure for a core dump...
 */
 int dump_fpu (struct pt_regs *regs, struct user_fp *fp)
diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c
index 1423a3419789..e7714f367eb8 100644
--- a/arch/arm/kernel/signal.c
+++ b/arch/arm/kernel/signal.c
@@ -1,7 +1,7 @@
 /*
 *  linux/arch/arm/kernel/signal.c
 *
- *  Copyright (C) 1995-2002 Russell King
+ *  Copyright (C) 1995-2009 Russell King
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
@@ -29,6 +29,7 @@
 */
 #define SWI_SYS_SIGRETURN       (0xef000000|(__NR_sigreturn)|(__NR_OABI_SYSCALL_BASE))
 #define SWI_SYS_RT_SIGRETURN    (0xef000000|(__NR_rt_sigreturn)|(__NR_OABI_SYSCALL_BASE))
+#define SWI_SYS_RESTART         (0xef000000|__NR_restart_syscall|__NR_OABI_SYSCALL_BASE)
 /*
 * With EABI, the syscall number has to be loaded into r7.
@@ -49,6 +50,18 @@ const unsigned long sigreturn_codes[7] = {
 };
 /*
+ * Either we support OABI only, or we have EABI with the OABI
+ * compat layer enabled.  In the later case we don't know if
+ * user space is EABI or not, and if not we must not clobber r7.
+ * Always using the OABI syscall solves that issue and works for
+ * all those cases.
+ */
+const unsigned long syscall_restart_code[2] = {
+        SWI_SYS_RESTART,        /* swi  __NR_restart_syscall */
+        0xe49df004,             /* ldr  pc, [sp], #4 */
+};
+/*
 * atomically swap in the new signal mask, and wait for a signal.
 */
 asmlinkage int sys_sigsuspend(int restart, unsigned long oldmask, old_sigset_t mask)
@@ -645,32 +658,16 @@ static void do_signal(struct pt_regs *regs, int syscall)
                                regs->ARM_pc -= 4;
 #else
                                u32 __user *usp;
-                                u32 swival = __NR_restart_syscall;
-                                regs->ARM_sp -= 12;
+                                regs->ARM_sp -= 4;
                                usp = (u32 __user *)regs->ARM_sp;
-                                /*
+                                if (put_user(regs->ARM_pc, usp) == 0) {
-                                 * Either we supports OABI only, or we have
+                                        regs->ARM_pc = KERN_RESTART_CODE;
-                                 * EABI with the OABI compat layer enabled.
+                                } else {
-                                 * In the later case we don't know if user
+                                        regs->ARM_sp += 4;
-                                 * space is EABI or not, and if not we must
+                                        force_sigsegv(0, current);
-                                 * not clobber r7.  Always using the OABI
+                                }
-                                 * syscall solves that issue and works for
-                                 * all those cases.
-                                 */
-                                swival = swival - __NR_SYSCALL_BASE + __NR_OABI_SYSCALL_BASE;
-                                put_user(regs->ARM_pc, &usp[0]);
-                                /* swi __NR_restart_syscall */
-                                put_user(0xef000000 | swival, &usp[1]);
-                                /* ldr  pc, [sp], #12 */
-                                put_user(0xe49df00c, &usp[2]);
-                                flush_icache_range((unsigned long)usp,
-                                                   (unsigned long)(usp + 3));
-                                regs->ARM_pc = regs->ARM_sp + 4;
 #endif
                        }
                }
diff --git a/arch/arm/kernel/signal.h b/arch/arm/kernel/signal.h
index 27beece15502..6fcfe8398aa4 100644
--- a/arch/arm/kernel/signal.h
+++ b/arch/arm/kernel/signal.h
@@ -1,12 +1,14 @@
 /*
 *  linux/arch/arm/kernel/signal.h
 *
- *  Copyright (C) 2005 Russell King.
+ *  Copyright (C) 2005-2009 Russell King.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 */
 #define KERN_SIGRETURN_CODE     (CONFIG_VECTORS_BASE + 0x00000500)
+#define KERN_RESTART_CODE       (KERN_SIGRETURN_CODE + sizeof(sigreturn_codes))
 extern const unsigned long sigreturn_codes[7];
+extern const unsigned long syscall_restart_code[2];
diff --git a/arch/arm/kernel/smp_scu.c b/arch/arm/kernel/smp_scu.c
index d3831f616ee9..9ab4149bd983 100644
--- a/arch/arm/kernel/smp_scu.c
+++ b/arch/arm/kernel/smp_scu.c
@@ -37,6 +37,10 @@ void __init scu_enable(void __iomem *scu_base)
        u32 scu_ctrl;
        scu_ctrl = __raw_readl(scu_base + SCU_CTRL);
+        /* already enabled? */
+        if (scu_ctrl & 1)
+                return;
        scu_ctrl |= 1;
        __raw_writel(scu_ctrl, scu_base + SCU_CTRL);
diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c
index f838f36eb702..3f361a783f43 100644
--- a/arch/arm/kernel/traps.c
+++ b/arch/arm/kernel/traps.c
@@ -1,7 +1,7 @@
 /*
 *  linux/arch/arm/kernel/traps.c
 *
- *  Copyright (C) 1995-2002 Russell King
+ *  Copyright (C) 1995-2009 Russell King
 *  Fragments that appear the same as linux/arch/i386/kernel/traps.c (C) Linus Torvalds
 *
 * This program is free software; you can redistribute it and/or modify
@@ -528,7 +528,7 @@ asmlinkage int arm_syscall(int no, struct pt_regs *regs)
         * __kuser_cmpxchg code in entry-armv.S should be aware of its
         * existence.  Don't ever use this from user code.
         */
-        case 0xfff0:
+        case NR(cmpxchg):
        for (;;) {
                extern void do_DataAbort(unsigned long addr, unsigned int fsr,
                                         struct pt_regs *regs);
@@ -573,7 +573,7 @@ asmlinkage int arm_syscall(int no, struct pt_regs *regs)
                   if not implemented, rather than raising SIGILL.  This
                   way the calling program can gracefully determine whether
                   a feature is supported.  */
-                if (no <= 0x7ff)
+                if ((no & 0xffff) <= 0x7ff)
                        return -ENOSYS;
                break;
        }
@@ -751,6 +751,8 @@ void __init early_trap_init(void)
         */
        memcpy((void *)KERN_SIGRETURN_CODE, sigreturn_codes,
               sizeof(sigreturn_codes));
+        memcpy((void *)KERN_RESTART_CODE, syscall_restart_code,
+               sizeof(syscall_restart_code));
        flush_icache_range(vectors, vectors + PAGE_SIZE);
        modify_domain(DOMAIN_USER, DOMAIN_CLIENT);
diff --git a/arch/arm/kernel/unwind.c b/arch/arm/kernel/unwind.c
index 39baf1128bfa..786ac2b6914a 100644
--- a/arch/arm/kernel/unwind.c
+++ b/arch/arm/kernel/unwind.c
@@ -26,6 +26,15 @@
 * http://infocenter.arm.com/help/topic/com.arm.doc.subset.swdev.abi/index.html
 */
+#if !defined (__ARM_EABI__)
+#warning Your compiler does not have EABI support.
+#warning    ARM unwind is known to compile only with EABI compilers.
+#warning    Change compiler or disable ARM_UNWIND option.
+#elif (__GNUC__ == 4 && __GNUC_MINOR__ <= 2)
+#warning Your compiler is too buggy; it is known to not compile ARM unwind support.
+#warning    Change compiler or disable ARM_UNWIND option.
+#endif
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/module.h>
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 7878e3312861..c71e39ed092f 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -294,13 +294,6 @@ config MACH_NEOCORE926
        help
          Select this if you are using the Adeneo Neocore 926 board.
-config MACH_AT91SAM9G20EK_2MMC
-        bool "Atmel AT91SAM9G20-EK Evaluation Kit modified for 2 MMC Slots"
-        depends on ARCH_AT91SAM9G20
-        help
-          Select this if you are using an Atmel AT91SAM9G20-EK Evaluation Kit
-          Rev A or B modified for 2 MMC Slots.
 endif
 # ----------------------------------------------------------
@@ -327,7 +320,16 @@ config MACH_AT91SAM9G20EK
        bool "Atmel AT91SAM9G20-EK Evaluation Kit"
        depends on ARCH_AT91SAM9G20
        help
-          Select this if you are using Atmel's AT91SAM9G20-EK Evaluation Kit.
+          Select this if you are using Atmel's AT91SAM9G20-EK Evaluation Kit
+          that embeds only one SD/MMC slot.
+config MACH_AT91SAM9G20EK_2MMC
+        bool "Atmel AT91SAM9G20-EK Evaluation Kit with 2 SD/MMC Slots"
+        depends on ARCH_AT91SAM9G20
+        help
+          Select this if you are using an Atmel AT91SAM9G20-EK Evaluation Kit
+          with 2 SD/MMC Slots. This is the case for AT91SAM9G20-EK rev. C and
+          onwards.
 config MACH_CPU9G20
        bool "Eukrea CPU9G20 board"
@@ -397,7 +399,7 @@ config MTD_AT91_DATAFLASH_CARD
 config MTD_NAND_ATMEL_BUSWIDTH_16
        bool "Enable 16-bit data bus interface to NAND flash"
-        depends on (MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9G10EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_AT91SAM9G45EKES || MACH_AT91CAP9ADK)
+        depends on (MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9G10EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_AT91SAM9G20EK_2MMC || MACH_AT91SAM9G45EKES || MACH_AT91CAP9ADK)
        help
          On AT91SAM926x boards both types of NAND flash can be present
          (8 and 16 bit data bus width).
diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
index 003f4f91fa52..a57af3e99c7c 100644
--- a/arch/arm/mach-at91/at91sam9g45_devices.c
+++ b/arch/arm/mach-at91/at91sam9g45_devices.c
@@ -894,7 +894,7 @@ static void __init at91_add_device_rtt(void)
 *  Watchdog
 * -------------------------------------------------------------------- */
-#if defined(CONFIG_AT91SAM9_WATCHDOG) || defined(CONFIG_AT91SAM9_WATCHDOG_MODULE)
+#if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE)
 static struct platform_device at91sam9g45_wdt_device = {
        .name           = "at91_wdt",
        .id             = -1,
diff --git a/arch/arm/mach-at91/board-sam9g20ek-2slot-mmc.c b/arch/arm/mach-at91/board-sam9g20ek-2slot-mmc.c
index a28e53faf71d..a4102d72cc9b 100644
--- a/arch/arm/mach-at91/board-sam9g20ek-2slot-mmc.c
+++ b/arch/arm/mach-at91/board-sam9g20ek-2slot-mmc.c
@@ -90,7 +90,7 @@ static struct at91_udc_data __initdata ek_udc_data = {
 * SPI devices.
 */
 static struct spi_board_info ek_spi_devices[] = {
-#if !defined(CONFIG_MMC_ATMELMCI)
+#if !(defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_AT91))
        {       /* DataFlash chip */
                .modalias       = "mtd_dataflash",
                .chip_select    = 1,
@@ -113,7 +113,7 @@ static struct spi_board_info ek_spi_devices[] = {
 * MACB Ethernet device
 */
 static struct at91_eth_data __initdata ek_macb_data = {
-        .phy_irq_pin    = AT91_PIN_PC12,
+        .phy_irq_pin    = AT91_PIN_PB0,
        .is_rmii        = 1,
 };
@@ -194,24 +194,27 @@ static void __init ek_add_device_nand(void)
 /*
 * MCI (SD/MMC)
- * det_pin and wp_pin are not connected
+ * wp_pin is not connected
 */
 #if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
 static struct mci_platform_data __initdata ek_mmc_data = {
        .slot[0] = {
                .bus_width      = 4,
-                .detect_pin     = -ENODEV,
+                .detect_pin     = AT91_PIN_PC2,
                .wp_pin         = -ENODEV,
        },
        .slot[1] = {
                .bus_width      = 4,
-                .detect_pin     = -ENODEV,
+                .detect_pin     = AT91_PIN_PC9,
                .wp_pin         = -ENODEV,
        },
 };
 #else
-static struct amci_platform_data __initdata ek_mmc_data = {
+static struct at91_mmc_data __initdata ek_mmc_data = {
+        .slot_b         = 1,    /* Only one slot so use slot B */
+        .wire4          = 1,
+        .det_pin        = AT91_PIN_PC9,
 };
 #endif
@@ -221,13 +224,13 @@ static struct amci_platform_data __initdata ek_mmc_data = {
 static struct gpio_led ek_leds[] = {
        {       /* "bottom" led, green, userled1 to be defined */
                .name                   = "ds5",
-                .gpio                   = AT91_PIN_PB12,
+                .gpio                   = AT91_PIN_PB8,
                .active_low             = 1,
                .default_trigger        = "none",
        },
        {       /* "power" led, yellow */
                .name                   = "ds1",
-                .gpio                   = AT91_PIN_PB13,
+                .gpio                   = AT91_PIN_PB9,
                .default_trigger        = "heartbeat",
        }
 };
@@ -254,7 +257,11 @@ static void __init ek_board_init(void)
        /* Ethernet */
        at91_add_device_eth(&ek_macb_data);
        /* MMC */
+#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
        at91_add_device_mci(0, &ek_mmc_data);
+#else
+        at91_add_device_mmc(0, &ek_mmc_data);
+#endif
        /* I2C */
        at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices));
        /* LEDs */
diff --git a/arch/arm/mach-at91/include/mach/cpu.h b/arch/arm/mach-at91/include/mach/cpu.h
index 34a9502c48bc..c22df30ed5e5 100644
--- a/arch/arm/mach-at91/include/mach/cpu.h
+++ b/arch/arm/mach-at91/include/mach/cpu.h
@@ -25,6 +25,8 @@
 #define ARCH_ID_AT91SAM9G20     0x019905a0
 #define ARCH_ID_AT91SAM9RL64    0x019b03a0
 #define ARCH_ID_AT91SAM9G45     0x819b05a0
+#define ARCH_ID_AT91SAM9G45MRL  0x819b05a2      /* aka 9G45-ES2 & non ES lots */
+#define ARCH_ID_AT91SAM9G45ES   0x819b05a1      /* 9G45-ES (Engineering Sample) */
 #define ARCH_ID_AT91CAP9        0x039A03A0
 #define ARCH_ID_AT91SAM9XE128   0x329973a0
@@ -41,6 +43,11 @@ static inline unsigned long at91_cpu_identify(void)
        return (at91_sys_read(AT91_DBGU_CIDR) & ~AT91_CIDR_VERSION);
 }
+static inline unsigned long at91_cpu_fully_identify(void)
+{
+        return at91_sys_read(AT91_DBGU_CIDR);
+}
 #define ARCH_EXID_AT91SAM9M11   0x00000001
 #define ARCH_EXID_AT91SAM9M10   0x00000002
 #define ARCH_EXID_AT91SAM9G45   0x00000004
@@ -118,8 +125,10 @@ static inline unsigned long at91cap9_rev_identify(void)
 #ifdef CONFIG_ARCH_AT91SAM9G45
 #define cpu_is_at91sam9g45()    (at91_cpu_identify() == ARCH_ID_AT91SAM9G45)
+#define cpu_is_at91sam9g45es()  (at91_cpu_fully_identify() == ARCH_ID_AT91SAM9G45ES)
 #else
 #define cpu_is_at91sam9g45()    (0)
+#define cpu_is_at91sam9g45es()  (0)
 #endif
 #ifdef CONFIG_ARCH_AT91CAP9
diff --git a/arch/arm/mach-bcmring/include/mach/io.h b/arch/arm/mach-bcmring/include/mach/io.h
index 4db0eff90357..dae5e9b166ea 100644
--- a/arch/arm/mach-bcmring/include/mach/io.h
+++ b/arch/arm/mach-bcmring/include/mach/io.h
@@ -23,34 +23,11 @@
 #define IO_SPACE_LIMIT 0xffffffff
-#define __io(a)         ((void __iomem *)HW_IO_PHYS_TO_VIRT(a))
+/*
+ * We don't actually have real ISA nor PCI buses, but there is so many
-/* Do not enable mem_pci for a big endian arm architecture or unexpected byteswaps will */
+ * drivers out there that might just work if we fake them...
-/* happen in readw/writew etc. */
+ */
+#define __io(a)         __typesafe_io(a)
-#define readb(c)        __raw_readb(c)
+#define __mem_pci(a)    (a)
-#define readw(c)        __raw_readw(c)
-#define readl(c)        __raw_readl(c)
-#define readb_relaxed(addr) readb(addr)
-#define readw_relaxed(addr) readw(addr)
-#define readl_relaxed(addr) readl(addr)
-#define readsb(p, d, l)   __raw_readsb(p, d, l)
-#define readsw(p, d, l)   __raw_readsw(p, d, l)
-#define readsl(p, d, l)   __raw_readsl(p, d, l)
-#define writeb(v, c)     __raw_writeb(v, c)
-#define writew(v, c)     __raw_writew(v, c)
-#define writel(v, c)     __raw_writel(v, c)
-#define writesb(p, d, l)  __raw_writesb(p, d, l)
-#define writesw(p, d, l)  __raw_writesw(p, d, l)
-#define writesl(p, d, l)  __raw_writesl(p, d, l)
-#define memset_io(c, v, l)    _memset_io((c), (v), (l))
-#define memcpy_fromio(a, c, l)    _memcpy_fromio((a), (c), (l))
-#define memcpy_toio(c, a, l)  _memcpy_toio((c), (a), (l))
-#define eth_io_copy_and_sum(s, c, l, b) eth_copy_and_sum((s), (c), (l), (b))
 #endif
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index f95dc160c34b..1f0d66561bbe 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -31,6 +31,7 @@
 #include <mach/hardware.h>
 #include <mach/fb.h>
+#include <mach/ep93xx_keypad.h>
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
@@ -206,7 +207,6 @@ static void ep93xx_gpio_ab_irq_handler(unsigned int irq, struct irq_desc *desc)
        for (i = 0; i < 8; i++) {
                if (status & (1 << i)) {
                        int gpio_irq = gpio_to_irq(EP93XX_GPIO_LINE_B(0)) + i;
-                        desc = irq_desc + gpio_irq;
                        generic_handle_irq(gpio_irq);
                }
        }
@@ -729,6 +729,82 @@ void __init ep93xx_register_fb(struct ep93xxfb_mach_info *data)
        platform_device_register(&ep93xx_fb_device);
 }
+/*************************************************************************
+ * EP93xx matrix keypad peripheral handling
+ *************************************************************************/
+static struct resource ep93xx_keypad_resource[] = {
+        {
+                .start  = EP93XX_KEY_MATRIX_PHYS_BASE,
+                .end    = EP93XX_KEY_MATRIX_PHYS_BASE + 0x0c - 1,
+                .flags  = IORESOURCE_MEM,
+        }, {
+                .start  = IRQ_EP93XX_KEY,
+                .end    = IRQ_EP93XX_KEY,
+                .flags  = IORESOURCE_IRQ,
+        },
+};
+static struct platform_device ep93xx_keypad_device = {
+        .name                   = "ep93xx-keypad",
+        .id                     = -1,
+        .num_resources          = ARRAY_SIZE(ep93xx_keypad_resource),
+        .resource               = ep93xx_keypad_resource,
+};
+void __init ep93xx_register_keypad(struct ep93xx_keypad_platform_data *data)
+{
+        ep93xx_keypad_device.dev.platform_data = data;
+        platform_device_register(&ep93xx_keypad_device);
+}
+int ep93xx_keypad_acquire_gpio(struct platform_device *pdev)
+{
+        int err;
+        int i;
+        for (i = 0; i < 8; i++) {
+                err = gpio_request(EP93XX_GPIO_LINE_C(i), dev_name(&pdev->dev));
+                if (err)
+                        goto fail_gpio_c;
+                err = gpio_request(EP93XX_GPIO_LINE_D(i), dev_name(&pdev->dev));
+                if (err)
+                        goto fail_gpio_d;
+        }
+        /* Enable the keypad controller; GPIO ports C and D used for keypad */
+        ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_KEYS |
+                                 EP93XX_SYSCON_DEVCFG_GONK);
+        return 0;
+fail_gpio_d:
+        gpio_free(EP93XX_GPIO_LINE_C(i));
+fail_gpio_c:
+        for ( ; i >= 0; --i) {
+                gpio_free(EP93XX_GPIO_LINE_C(i));
+                gpio_free(EP93XX_GPIO_LINE_D(i));
+        }
+        return err;
+}
+EXPORT_SYMBOL(ep93xx_keypad_acquire_gpio);
+void ep93xx_keypad_release_gpio(struct platform_device *pdev)
+{
+        int i;
+        for (i = 0; i < 8; i++) {
+                gpio_free(EP93XX_GPIO_LINE_C(i));
+                gpio_free(EP93XX_GPIO_LINE_D(i));
+        }
+        /* Disable the keypad controller; GPIO ports C and D used for GPIO */
+        ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_KEYS |
+                               EP93XX_SYSCON_DEVCFG_GONK);
+}
+EXPORT_SYMBOL(ep93xx_keypad_release_gpio);
 extern void ep93xx_gpio_init(void);
 void __init ep93xx_init_devices(void)
diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c
index ca71cf1a72a0..a4a7be308000 100644
--- a/arch/arm/mach-ep93xx/edb93xx.c
+++ b/arch/arm/mach-ep93xx/edb93xx.c
@@ -112,7 +112,7 @@ static void __init edb93xx_register_i2c(void)
                                    ARRAY_SIZE(edb93xxa_i2c_board_info));
        } else if (machine_is_edb9307() || machine_is_edb9312() ||
                   machine_is_edb9315()) {
-                ep93xx_register_i2c(&edb93xx_i2c_gpio_data
+                ep93xx_register_i2c(&edb93xx_i2c_gpio_data,
                                    edb93xx_i2c_board_info,
                                    ARRAY_SIZE(edb93xx_i2c_board_info));
        }
diff --git a/arch/arm/mach-ep93xx/include/mach/clkdev.h b/arch/arm/mach-ep93xx/include/mach/clkdev.h
index 04b37a89801c..50cb991eadeb 100644
--- a/arch/arm/mach-ep93xx/include/mach/clkdev.h
+++ b/arch/arm/mach-ep93xx/include/mach/clkdev.h
@@ -1,3 +1,7 @@
+/*
+ * arch/arm/mach-ep93xx/include/mach/clkdev.h
+ */
 #ifndef __ASM_MACH_CLKDEV_H
 #define __ASM_MACH_CLKDEV_H
diff --git a/arch/arm/mach-ep93xx/include/mach/dma.h b/arch/arm/mach-ep93xx/include/mach/dma.h
index ef6bd9d13148..3a5961d3f3b1 100644
--- a/arch/arm/mach-ep93xx/include/mach/dma.h
+++ b/arch/arm/mach-ep93xx/include/mach/dma.h
@@ -1,3 +1,7 @@
+/*
+ * arch/arm/mach-ep93xx/include/mach/dma.h
+ */
 #ifndef __ASM_ARCH_DMA_H
 #define __ASM_ARCH_DMA_H
diff --git a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
index b1f937eda29c..d55194a4c093 100644
--- a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
+++ b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
@@ -134,6 +134,7 @@
 #define EP93XX_UART3_PHYS_BASE          EP93XX_APB_PHYS(0x000e0000)
 #define EP93XX_UART3_BASE               EP93XX_APB_IOMEM(0x000e0000)
+#define EP93XX_KEY_MATRIX_PHYS_BASE     EP93XX_APB_PHYS(0x000f0000)
 #define EP93XX_KEY_MATRIX_BASE          EP93XX_APB_IOMEM(0x000f0000)
 #define EP93XX_ADC_BASE                 EP93XX_APB_IOMEM(0x00100000)
diff --git a/arch/arm/mach-ep93xx/include/mach/hardware.h b/arch/arm/mach-ep93xx/include/mach/hardware.h
index 349fa7cb72d5..5a3ce024b593 100644
--- a/arch/arm/mach-ep93xx/include/mach/hardware.h
+++ b/arch/arm/mach-ep93xx/include/mach/hardware.h
@@ -1,6 +1,7 @@
 /*
 * arch/arm/mach-ep93xx/include/mach/hardware.h
 */
 #ifndef __ASM_ARCH_HARDWARE_H
 #define __ASM_ARCH_HARDWARE_H
diff --git a/arch/arm/mach-ep93xx/include/mach/io.h b/arch/arm/mach-ep93xx/include/mach/io.h
index cebcc1c53d63..594b77f21054 100644
--- a/arch/arm/mach-ep93xx/include/mach/io.h
+++ b/arch/arm/mach-ep93xx/include/mach/io.h
@@ -1,6 +1,7 @@
 /*
 * arch/arm/mach-ep93xx/include/mach/io.h
 */
 #ifndef __ASM_MACH_IO_H
 #define __ASM_MACH_IO_H
diff --git a/arch/arm/mach-ep93xx/include/mach/platform.h b/arch/arm/mach-ep93xx/include/mach/platform.h
index a3ec33fd79d4..c6dc14dbca18 100644
--- a/arch/arm/mach-ep93xx/include/mach/platform.h
+++ b/arch/arm/mach-ep93xx/include/mach/platform.h
@@ -8,6 +8,7 @@ struct i2c_gpio_platform_data;
 struct i2c_board_info;
 struct platform_device;
 struct ep93xxfb_mach_info;
+struct ep93xx_keypad_platform_data;
 struct ep93xx_eth_data
 {
@@ -17,7 +18,6 @@ struct ep93xx_eth_data
 void ep93xx_map_io(void);
 void ep93xx_init_irq(void);
-void ep93xx_init_time(unsigned long);
 /* EP93xx System Controller software locked register write */
 void ep93xx_syscon_swlocked_write(unsigned int val, void __iomem *reg);
@@ -40,6 +40,9 @@ void ep93xx_register_fb(struct ep93xxfb_mach_info *data);
 void ep93xx_register_pwm(int pwm0, int pwm1);
 int ep93xx_pwm_acquire_gpio(struct platform_device *pdev);
 void ep93xx_pwm_release_gpio(struct platform_device *pdev);
+void ep93xx_register_keypad(struct ep93xx_keypad_platform_data *data);
+int ep93xx_keypad_acquire_gpio(struct platform_device *pdev);
+void ep93xx_keypad_release_gpio(struct platform_device *pdev);
 void ep93xx_init_devices(void);
 extern struct sys_timer ep93xx_timer;
diff --git a/arch/arm/mach-ep93xx/micro9.c b/arch/arm/mach-ep93xx/micro9.c
index d83b80478b09..f3757a1c5a10 100644
--- a/arch/arm/mach-ep93xx/micro9.c
+++ b/arch/arm/mach-ep93xx/micro9.c
@@ -15,6 +15,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/mtd/physmap.h>
+#include <linux/io.h>
 #include <mach/hardware.h>
diff --git a/arch/arm/mach-integrator/include/mach/memory.h b/arch/arm/mach-integrator/include/mach/memory.h
index 2b2e7a110724..4891828454f5 100644
--- a/arch/arm/mach-integrator/include/mach/memory.h
+++ b/arch/arm/mach-integrator/include/mach/memory.h
@@ -28,5 +28,6 @@
 #define BUS_OFFSET      UL(0x80000000)
 #define __virt_to_bus(x)        ((x) - PAGE_OFFSET + BUS_OFFSET)
 #define __bus_to_virt(x)        ((x) - BUS_OFFSET + PAGE_OFFSET)
+#define __pfn_to_bus(x)         (((x) << PAGE_SHIFT) + BUS_OFFSET)
 #endif
diff --git a/arch/arm/mach-iop13xx/include/mach/memory.h b/arch/arm/mach-iop13xx/include/mach/memory.h
index 42ae29b288a1..25b1da9a5035 100644
--- a/arch/arm/mach-iop13xx/include/mach/memory.h
+++ b/arch/arm/mach-iop13xx/include/mach/memory.h
@@ -64,6 +64,8 @@ static inline unsigned long __lbus_to_virt(dma_addr_t x)
                (dma_addr_t)page_to_phys(page);                         \
        })
+#define __arch_dma_to_page(dev, addr)   phys_to_page(addr)
 #endif /* CONFIG_ARCH_IOP13XX */
 #endif /* !ASSEMBLY */
diff --git a/arch/arm/mach-kirkwood/addr-map.c b/arch/arm/mach-kirkwood/addr-map.c
index 1da5d1c18ecb..2e69168fc699 100644
--- a/arch/arm/mach-kirkwood/addr-map.c
+++ b/arch/arm/mach-kirkwood/addr-map.c
@@ -105,7 +105,7 @@ void __init kirkwood_setup_cpu_mbus(void)
        setup_cpu_win(0, KIRKWOOD_PCIE_IO_PHYS_BASE, KIRKWOOD_PCIE_IO_SIZE,
                      TARGET_PCIE, ATTR_PCIE_IO, KIRKWOOD_PCIE_IO_BUS_BASE);
        setup_cpu_win(1, KIRKWOOD_PCIE_MEM_PHYS_BASE, KIRKWOOD_PCIE_MEM_SIZE,
-                      TARGET_PCIE, ATTR_PCIE_MEM, -1);
+                      TARGET_PCIE, ATTR_PCIE_MEM, KIRKWOOD_PCIE_MEM_BUS_BASE);
        /*
         * Setup window for NAND controller.
diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
index 0acb61f3c10b..242dd0775343 100644
--- a/arch/arm/mach-kirkwood/common.c
+++ b/arch/arm/mach-kirkwood/common.c
@@ -845,7 +845,7 @@ int __init kirkwood_find_tclk(void)
        return 166666667;
 }
-static void kirkwood_timer_init(void)
+static void __init kirkwood_timer_init(void)
 {
        kirkwood_tclk = kirkwood_find_tclk();
        orion_time_init(IRQ_KIRKWOOD_BRIDGE, kirkwood_tclk);
@@ -915,6 +915,14 @@ void __init kirkwood_init(void)
        kirkwood_uart0_data[0].uartclk = kirkwood_tclk;
        kirkwood_uart1_data[0].uartclk = kirkwood_tclk;
+        /*
+         * Disable propagation of mbus errors to the CPU local bus,
+         * as this causes mbus errors (which can occur for example
+         * for PCI aborts) to throw CPU aborts, which we're not set
+         * up to deal with.
+         */
+        writel(readl(CPU_CONFIG) & ~CPU_CONFIG_ERROR_PROP, CPU_CONFIG);
        kirkwood_setup_cpu_mbus();
 #ifdef CONFIG_CACHE_FEROCEON_L2
diff --git a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h
index 9e80d9232c83..418f5017c50e 100644
--- a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h
+++ b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h
@@ -13,6 +13,9 @@
 #include <mach/kirkwood.h>
+#define CPU_CONFIG              (BRIDGE_VIRT_BASE | 0x0100)
+#define CPU_CONFIG_ERROR_PROP   0x00000004
 #define CPU_CONTROL             (BRIDGE_VIRT_BASE | 0x0104)
 #define CPU_RESET               0x00000002
diff --git a/arch/arm/mach-kirkwood/include/mach/io.h b/arch/arm/mach-kirkwood/include/mach/io.h
index a643a846d5fb..44e8be04f259 100644
--- a/arch/arm/mach-kirkwood/include/mach/io.h
+++ b/arch/arm/mach-kirkwood/include/mach/io.h
@@ -15,7 +15,7 @@
 static inline void __iomem *__io(unsigned long addr)
 {
-        return (void __iomem *)((addr - KIRKWOOD_PCIE_IO_PHYS_BASE)
+        return (void __iomem *)((addr - KIRKWOOD_PCIE_IO_BUS_BASE)
                                        + KIRKWOOD_PCIE_IO_VIRT_BASE);
 }
diff --git a/arch/arm/mach-kirkwood/include/mach/kirkwood.h b/arch/arm/mach-kirkwood/include/mach/kirkwood.h
index 54c132731d2d..a15cf0ee22bd 100644
--- a/arch/arm/mach-kirkwood/include/mach/kirkwood.h
+++ b/arch/arm/mach-kirkwood/include/mach/kirkwood.h
@@ -43,6 +43,7 @@
 #define KIRKWOOD_REGS_SIZE              SZ_1M
 #define KIRKWOOD_PCIE_MEM_PHYS_BASE     0xe0000000
+#define KIRKWOOD_PCIE_MEM_BUS_BASE      0xe0000000
 #define KIRKWOOD_PCIE_MEM_SIZE          SZ_128M
 /*
diff --git a/arch/arm/mach-kirkwood/openrd_base-setup.c b/arch/arm/mach-kirkwood/openrd_base-setup.c
index 947dfb8cd5b2..77617c722299 100644
--- a/arch/arm/mach-kirkwood/openrd_base-setup.c
+++ b/arch/arm/mach-kirkwood/openrd_base-setup.c
@@ -70,8 +70,20 @@ static void __init openrd_base_init(void)
        kirkwood_ge00_init(&openrd_base_ge00_data);
        kirkwood_sata_init(&openrd_base_sata_data);
        kirkwood_sdio_init(&openrd_base_mvsdio_data);
+        kirkwood_i2c_init();
 }
+static int __init openrd_base_pci_init(void)
+{
+        if (machine_is_openrd_base())
+                kirkwood_pcie_init();
+        return 0;
+ }
+subsys_initcall(openrd_base_pci_init);
 MACHINE_START(OPENRD_BASE, "Marvell OpenRD Base Board")
        /* Maintainer: Dhaval Vasa <dhaval.vasa@einfochips.com> */
        .phys_io        = KIRKWOOD_REGS_PHYS_BASE,
diff --git a/arch/arm/mach-kirkwood/pcie.c b/arch/arm/mach-kirkwood/pcie.c
index d90b9aae308d..a604b2a701aa 100644
--- a/arch/arm/mach-kirkwood/pcie.c
+++ b/arch/arm/mach-kirkwood/pcie.c
@@ -93,7 +93,7 @@ static struct pci_ops pcie_ops = {
 };
-static int kirkwood_pcie_setup(int nr, struct pci_sys_data *sys)
+static int __init kirkwood_pcie_setup(int nr, struct pci_sys_data *sys)
 {
        struct resource *res;
        extern unsigned int kirkwood_clk_ctrl;
@@ -115,7 +115,7 @@ static int kirkwood_pcie_setup(int nr, struct pci_sys_data *sys)
         */
        res[0].name = "PCIe I/O Space";
        res[0].flags = IORESOURCE_IO;
-        res[0].start = KIRKWOOD_PCIE_IO_PHYS_BASE;
+        res[0].start = KIRKWOOD_PCIE_IO_BUS_BASE;
        res[0].end = res[0].start + KIRKWOOD_PCIE_IO_SIZE - 1;
        if (request_resource(&ioport_resource, &res[0]))
                panic("Request PCIe IO resource failed\n");
@@ -126,7 +126,7 @@ static int kirkwood_pcie_setup(int nr, struct pci_sys_data *sys)
         */
        res[1].name = "PCIe Memory Space";
        res[1].flags = IORESOURCE_MEM;
-        res[1].start = KIRKWOOD_PCIE_MEM_PHYS_BASE;
+        res[1].start = KIRKWOOD_PCIE_MEM_BUS_BASE;
        res[1].end = res[1].start + KIRKWOOD_PCIE_MEM_SIZE - 1;
        if (request_resource(&iomem_resource, &res[1]))
                panic("Request PCIe Memory resource failed\n");
diff --git a/arch/arm/mach-ks8695/include/mach/memory.h b/arch/arm/mach-ks8695/include/mach/memory.h
index 76e5308685a4..ffa19aae6e05 100644
--- a/arch/arm/mach-ks8695/include/mach/memory.h
+++ b/arch/arm/mach-ks8695/include/mach/memory.h
@@ -41,6 +41,13 @@ extern struct bus_type platform_bus_type;
                __dma = __dma - PHYS_OFFSET + KS8695_PCIMEM_PA; \
           __dma; })
+#define __arch_dma_to_page(dev, x)      \
+        ({ dma_addr_t __dma = x;                                \
+           if (!is_lbus_device(dev))                            \
+                __dma += PHYS_OFFSET - KS8695_PCIMEM_PA;        \
+           phys_to_page(__dma);                                 \
+        })
 #endif
 #endif
diff --git a/arch/arm/mach-ks8695/include/mach/regs-switch.h b/arch/arm/mach-ks8695/include/mach/regs-switch.h
index 56d12e8de895..97e8acb1cf6c 100644
--- a/arch/arm/mach-ks8695/include/mach/regs-switch.h
+++ b/arch/arm/mach-ks8695/include/mach/regs-switch.h
@@ -25,7 +25,7 @@
 #define KS8695_SEC1             (0x04)          /* Switch Engine Control 1 */
 #define KS8695_SEC2             (0x08)          /* Switch Engine Control 2 */
-#define KS8695_P(x)_C(z)        (0xc0 + (((x)-1)*3 + ((z)-1))*4)        /* Port Configuration Registers */
+#define KS8695_SEPXCZ(x,z)      (0x0c + (((x)-1)*3 + ((z)-1))*4)        /* Port Configuration Registers */
 #define KS8695_SEP12AN          (0x48)          /* Port 1 & 2 Auto-Negotiation */
 #define KS8695_SEP34AN          (0x4c)          /* Port 3 & 4 Auto-Negotiation */
diff --git a/arch/arm/mach-mmp/include/mach/mfp-pxa910.h b/arch/arm/mach-mmp/include/mach/mfp-pxa910.h
index bf1189ff9a34..7e8a80f25ddc 100644
--- a/arch/arm/mach-mmp/include/mach/mfp-pxa910.h
+++ b/arch/arm/mach-mmp/include/mach/mfp-pxa910.h
@@ -160,7 +160,7 @@
 #define MMC1_WP_MMC1_WP         MFP_CFG_DRV(MMC1_WP, AF0, MEDIUM)
 /* PWM */
-#define GPIO27 PWM3 AF2         MFP_CFG(GPIO27, AF2)
+#define GPIO27_PWM3_AF2         MFP_CFG(GPIO27, AF2)
 #define GPIO51_PWM2_OUT         MFP_CFG(GPIO51, AF2)
 #define GPIO117_PWM1_OUT        MFP_CFG(GPIO117, AF2)
 #define GPIO118_PWM2_OUT        MFP_CFG(GPIO118, AF2)
diff --git a/arch/arm/mach-mv78xx0/common.c b/arch/arm/mach-mv78xx0/common.c
index 1b22e4af8791..08465eb6a2c2 100644
--- a/arch/arm/mach-mv78xx0/common.c
+++ b/arch/arm/mach-mv78xx0/common.c
@@ -845,6 +845,8 @@ static char * __init mv78xx0_id(void)
        } else if (dev == MV78100_DEV_ID) {
                if (rev == MV78100_REV_A0)
                        return "MV78100-A0";
+                else if (rev == MV78100_REV_A1)
+                        return "MV78100-A1";
                else
                        return "MV78100-Rev-Unsupported";
        } else if (dev == MV78200_DEV_ID) {
diff --git a/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h b/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h
index d715b92b0908..788bdace1304 100644
--- a/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h
+++ b/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h
@@ -112,6 +112,7 @@
 #define MV78100_DEV_ID          0x7810
 #define MV78100_REV_A0          1
+#define MV78100_REV_A1          2
 #define MV78200_DEV_ID          0x7820
 #define MV78200_REV_A0          1
diff --git a/arch/arm/mach-mx2/clock_imx27.c b/arch/arm/mach-mx2/clock_imx27.c
index 4089951acb47..ff5e33298914 100644
--- a/arch/arm/mach-mx2/clock_imx27.c
+++ b/arch/arm/mach-mx2/clock_imx27.c
@@ -638,9 +638,9 @@ static struct clk_lookup lookups[] = {
        _REGISTER_CLOCK("mxc-mmc.0", NULL, sdhc1_clk)
        _REGISTER_CLOCK("mxc-mmc.1", NULL, sdhc2_clk)
        _REGISTER_CLOCK("mxc-mmc.2", NULL, sdhc3_clk)
-        _REGISTER_CLOCK(NULL, "cspi1", cspi1_clk)
+        _REGISTER_CLOCK("spi_imx.0", NULL, cspi1_clk)
-        _REGISTER_CLOCK(NULL, "cspi2", cspi2_clk)
+        _REGISTER_CLOCK("spi_imx.1", NULL, cspi2_clk)
-        _REGISTER_CLOCK(NULL, "cspi3", cspi3_clk)
+        _REGISTER_CLOCK("spi_imx.2", NULL, cspi3_clk)
        _REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk)
        _REGISTER_CLOCK(NULL, "csi", csi_clk)
        _REGISTER_CLOCK("fsl-usb2-udc", "usb", usb_clk)
@@ -665,7 +665,7 @@ static struct clk_lookup lookups[] = {
        _REGISTER_CLOCK(NULL, "sahara2", sahara2_clk)
        _REGISTER_CLOCK(NULL, "ata", ata_clk)
        _REGISTER_CLOCK(NULL, "mstick", mstick_clk)
-        _REGISTER_CLOCK(NULL, "wdog", wdog_clk)
+        _REGISTER_CLOCK("imx-wdt.0", NULL, wdog_clk)
        _REGISTER_CLOCK(NULL, "gpio", gpio_clk)
        _REGISTER_CLOCK("imx-i2c.0", NULL, i2c1_clk)
        _REGISTER_CLOCK("imx-i2c.1", NULL, i2c2_clk)
diff --git a/arch/arm/mach-mx2/pcm038.c b/arch/arm/mach-mx2/pcm038.c
index ee65dda584cf..906d59b0a7aa 100644
--- a/arch/arm/mach-mx2/pcm038.c
+++ b/arch/arm/mach-mx2/pcm038.c
@@ -23,6 +23,10 @@
 #include <linux/mtd/plat-ram.h>
 #include <linux/mtd/physmap.h>
 #include <linux/platform_device.h>
+#include <linux/regulator/machine.h>
+#include <linux/mfd/mc13783.h>
+#include <linux/spi/spi.h>
+#include <linux/irq.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -35,6 +39,7 @@
 #include <mach/iomux.h>
 #include <mach/imx-uart.h>
 #include <mach/mxc_nand.h>
+#include <mach/spi.h>
 #include "devices.h"
@@ -78,8 +83,6 @@ static int pcm038_pins[] = {
        PC6_PF_I2C2_SCL,
        /* SPI1 */
        PD25_PF_CSPI1_RDY,
-        PD27_PF_CSPI1_SS1,
-        PD28_PF_CSPI1_SS0,
        PD29_PF_CSPI1_SCLK,
        PD30_PF_CSPI1_MISO,
        PD31_PF_CSPI1_MOSI,
@@ -196,6 +199,86 @@ static struct i2c_board_info pcm038_i2c_devices[] = {
        }
 };
+static int pcm038_spi_cs[] = {GPIO_PORTD + 28};
+static struct spi_imx_master pcm038_spi_0_data = {
+        .chipselect = pcm038_spi_cs,
+        .num_chipselect = ARRAY_SIZE(pcm038_spi_cs),
+};
+static struct regulator_consumer_supply sdhc1_consumers[] = {
+        {
+                .dev    = &mxc_sdhc_device1.dev,
+                .supply = "sdhc_vcc",
+        },
+};
+static struct regulator_init_data sdhc1_data = {
+        .constraints = {
+                .min_uV = 3000000,
+                .max_uV = 3400000,
+                .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+                        REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS,
+                .valid_modes_mask = REGULATOR_MODE_NORMAL |
+                        REGULATOR_MODE_FAST,
+                .always_on = 0,
+                .boot_on = 0,
+        },
+        .num_consumer_supplies = ARRAY_SIZE(sdhc1_consumers),
+        .consumer_supplies = sdhc1_consumers,
+};
+static struct regulator_consumer_supply cam_consumers[] = {
+        {
+                .dev    = NULL,
+                .supply = "imx_cam_vcc",
+        },
+};
+static struct regulator_init_data cam_data = {
+        .constraints = {
+                .min_uV = 3000000,
+                .max_uV = 3400000,
+                .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+                        REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS,
+                .valid_modes_mask = REGULATOR_MODE_NORMAL |
+                        REGULATOR_MODE_FAST,
+                .always_on = 0,
+                .boot_on = 0,
+        },
+        .num_consumer_supplies = ARRAY_SIZE(cam_consumers),
+        .consumer_supplies = cam_consumers,
+};
+struct mc13783_regulator_init_data pcm038_regulators[] = {
+        {
+                .id = MC13783_REGU_VCAM,
+                .init_data = &cam_data,
+        }, {
+                .id = MC13783_REGU_VMMC1,
+                .init_data = &sdhc1_data,
+        },
+};
+static struct mc13783_platform_data pcm038_pmic = {
+        .regulators = pcm038_regulators,
+        .num_regulators = ARRAY_SIZE(pcm038_regulators),
+        .flags = MC13783_USE_ADC | MC13783_USE_REGULATOR |
+                 MC13783_USE_TOUCHSCREEN,
+};
+static struct spi_board_info pcm038_spi_board_info[] __initdata = {
+        {
+                .modalias = "mc13783",
+                .irq = IRQ_GPIOB(23),
+                .max_speed_hz = 300000,
+                .bus_num = 0,
+                .chip_select = 0,
+                .platform_data = &pcm038_pmic,
+                .mode = SPI_CS_HIGH,
+        }
+};
 static void __init pcm038_init(void)
 {
        mxc_gpio_setup_multiple_pins(pcm038_pins, ARRAY_SIZE(pcm038_pins),
@@ -219,6 +302,15 @@ static void __init pcm038_init(void)
        /* PE18 for user-LED D40 */
        mxc_gpio_mode(GPIO_PORTE | 18 | GPIO_GPIO | GPIO_OUT);
+        mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_OUT);
+        /* MC13783 IRQ */
+        mxc_gpio_mode(GPIO_PORTB | 23 | GPIO_GPIO | GPIO_IN);
+        mxc_register_device(&mxc_spi_device0, &pcm038_spi_0_data);
+        spi_register_board_info(pcm038_spi_board_info,
+                                ARRAY_SIZE(pcm038_spi_board_info));
        platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
 #ifdef CONFIG_MACH_PCM970_BASEBOARD
diff --git a/arch/arm/mach-mx2/pcm970-baseboard.c b/arch/arm/mach-mx2/pcm970-baseboard.c
index c261f59b0b4c..3cb7f457e5d0 100644
--- a/arch/arm/mach-mx2/pcm970-baseboard.c
+++ b/arch/arm/mach-mx2/pcm970-baseboard.c
@@ -39,7 +39,6 @@ static int pcm970_pins[] = {
        PB7_PF_SD2_D3,
        PB8_PF_SD2_CMD,
        PB9_PF_SD2_CLK,
-        GPIO_PORTC | 28 | GPIO_GPIO | GPIO_IN, /* card detect */
        /* display */
        PA5_PF_LSCLK,
        PA6_PF_LD0,
@@ -228,6 +227,7 @@ void __init pcm970_baseboard_init(void)
                        "PCM970");
        mxc_register_device(&mxc_fb_device, &pcm038_fb_data);
+        mxc_gpio_mode(GPIO_PORTC | 28 | GPIO_GPIO | GPIO_IN);
        mxc_register_device(&mxc_sdhc_device1, &sdhc_pdata);
        platform_device_register(&pcm970_sja1000);
 }
diff --git a/arch/arm/mach-mx25/devices.c b/arch/arm/mach-mx25/devices.c
index eb12de1da42d..63511de3a559 100644
--- a/arch/arm/mach-mx25/devices.c
+++ b/arch/arm/mach-mx25/devices.c
@@ -1,4 +1,23 @@
+/*
+ * Copyright 2009 Sascha Hauer, <kernel@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ * Boston, MA  02110-1301, USA.
+ */
 #include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
 #include <linux/gpio.h>
 #include <mach/mx25.h>
 #include <mach/irqs.h>
diff --git a/arch/arm/mach-mx25/mx25pdk.c b/arch/arm/mach-mx25/mx25pdk.c
index 92aa4fd19d99..d23ae571c03f 100644
--- a/arch/arm/mach-mx25/mx25pdk.c
+++ b/arch/arm/mach-mx25/mx25pdk.c
@@ -1,3 +1,21 @@
+/*
+ * Copyright 2009 Sascha Hauer, <kernel@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ * Boston, MA  02110-1301, USA.
+ */
 #include <linux/types.h>
 #include <linux/init.h>
 #include <linux/clk.h>
@@ -23,19 +41,12 @@ static struct imxuart_platform_data uart_pdata = {
        .flags = IMXUART_HAVE_RTSCTS,
 };
-static struct mxc_nand_platform_data nand_board_info = {
-        .width = 1,
-        .hw_ecc = 1,
-};
 static void __init mx25pdk_init(void)
 {
        mxc_register_device(&mxc_uart_device0, &uart_pdata);
        mxc_register_device(&mxc_usbh2, NULL);
-        mxc_register_device(&mxc_nand_device, &nand_board_info);
 }
 static void __init mx25pdk_timer_init(void)
 {
        mx25_clocks_init(26000000);
diff --git a/arch/arm/mach-mx3/clock-imx35.c b/arch/arm/mach-mx3/clock-imx35.c
index fe5c4217322e..c595260ec1f9 100644
--- a/arch/arm/mach-mx3/clock-imx35.c
+++ b/arch/arm/mach-mx3/clock-imx35.c
@@ -443,7 +443,7 @@ static struct clk_lookup lookups[] = {
        _REGISTER_CLOCK("mxc-ehci.1", "usb", usbotg_clk)
        _REGISTER_CLOCK("mxc-ehci.2", "usb", usbotg_clk)
        _REGISTER_CLOCK("fsl-usb2-udc", "usb", usbotg_clk)
-        _REGISTER_CLOCK("mxc_wdt.0", NULL, wdog_clk)
+        _REGISTER_CLOCK("imx-wdt.0", NULL, wdog_clk)
        _REGISTER_CLOCK(NULL, "max", max_clk)
        _REGISTER_CLOCK(NULL, "admux", admux_clk)
        _REGISTER_CLOCK(NULL, "csi", csi_clk)
diff --git a/arch/arm/mach-mx3/clock.c b/arch/arm/mach-mx3/clock.c
index 06bd6180bfc3..b2a3bcf8266e 100644
--- a/arch/arm/mach-mx3/clock.c
+++ b/arch/arm/mach-mx3/clock.c
@@ -530,7 +530,7 @@ static struct clk_lookup lookups[] = {
        _REGISTER_CLOCK("spi_imx.2", NULL, cspi3_clk)
        _REGISTER_CLOCK(NULL, "gpt", gpt_clk)
        _REGISTER_CLOCK(NULL, "pwm", pwm_clk)
-        _REGISTER_CLOCK(NULL, "wdog", wdog_clk)
+        _REGISTER_CLOCK("imx-wdt.0", NULL, wdog_clk)
        _REGISTER_CLOCK(NULL, "rtc", rtc_clk)
        _REGISTER_CLOCK(NULL, "epit", epit1_clk)
        _REGISTER_CLOCK(NULL, "epit", epit2_clk)
diff --git a/arch/arm/mach-mx3/devices.c b/arch/arm/mach-mx3/devices.c
index 8a577f367250..e6abe181b967 100644
--- a/arch/arm/mach-mx3/devices.c
+++ b/arch/arm/mach-mx3/devices.c
@@ -459,7 +459,7 @@ struct platform_device mxc_usbh2 = {
 * SPI master controller
 * 3 channels
 */
-static struct resource imx_spi_0_resources[] = {
+static struct resource mxc_spi_0_resources[] = {
        {
               .start = CSPI1_BASE_ADDR,
               .end = CSPI1_BASE_ADDR + SZ_4K - 1,
@@ -471,7 +471,7 @@ static struct resource imx_spi_0_resources[] = {
        },
 };
-static struct resource imx_spi_1_resources[] = {
+static struct resource mxc_spi_1_resources[] = {
        {
                .start = CSPI2_BASE_ADDR,
                .end = CSPI2_BASE_ADDR + SZ_4K - 1,
@@ -483,7 +483,7 @@ static struct resource imx_spi_1_resources[] = {
        },
 };
-static struct resource imx_spi_2_resources[] = {
+static struct resource mxc_spi_2_resources[] = {
        {
                .start = CSPI3_BASE_ADDR,
                .end = CSPI3_BASE_ADDR + SZ_4K - 1,
@@ -495,25 +495,25 @@ static struct resource imx_spi_2_resources[] = {
        },
 };
-struct platform_device imx_spi_device0 = {
+struct platform_device mxc_spi_device0 = {
        .name = "spi_imx",
        .id = 0,
-        .num_resources = ARRAY_SIZE(imx_spi_0_resources),
+        .num_resources = ARRAY_SIZE(mxc_spi_0_resources),
-        .resource = imx_spi_0_resources,
+        .resource = mxc_spi_0_resources,
 };
-struct platform_device imx_spi_device1 = {
+struct platform_device mxc_spi_device1 = {
        .name = "spi_imx",
        .id = 1,
-        .num_resources = ARRAY_SIZE(imx_spi_1_resources),
+        .num_resources = ARRAY_SIZE(mxc_spi_1_resources),
-        .resource = imx_spi_1_resources,
+        .resource = mxc_spi_1_resources,
 };
-struct platform_device imx_spi_device2 = {
+struct platform_device mxc_spi_device2 = {
        .name = "spi_imx",
        .id = 2,
-        .num_resources = ARRAY_SIZE(imx_spi_2_resources),
+        .num_resources = ARRAY_SIZE(mxc_spi_2_resources),
-        .resource = imx_spi_2_resources,
+        .resource = mxc_spi_2_resources,
 };
 #ifdef CONFIG_ARCH_MX35
diff --git a/arch/arm/mach-mx3/devices.h b/arch/arm/mach-mx3/devices.h
index 79f2be45d139..ab87419dc9a0 100644
--- a/arch/arm/mach-mx3/devices.h
+++ b/arch/arm/mach-mx3/devices.h
@@ -20,7 +20,7 @@ extern struct platform_device mxc_otg_host;
 extern struct platform_device mxc_usbh1;
 extern struct platform_device mxc_usbh2;
 extern struct platform_device mxc_rnga_device;
-extern struct platform_device imx_spi_device0;
+extern struct platform_device mxc_spi_device0;
-extern struct platform_device imx_spi_device1;
+extern struct platform_device mxc_spi_device1;
-extern struct platform_device imx_spi_device2;
+extern struct platform_device mxc_spi_device2;
diff --git a/arch/arm/mach-mx3/mm.c b/arch/arm/mach-mx3/mm.c
index ad5a1122d765..bedf5b8d976a 100644
--- a/arch/arm/mach-mx3/mm.c
+++ b/arch/arm/mach-mx3/mm.c
@@ -81,6 +81,7 @@ void __init mx31_map_io(void)
        iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
 }
+#ifdef CONFIG_ARCH_MX35
 void __init mx35_map_io(void)
 {
        mxc_set_cpu_type(MXC_CPU_MX35);
@@ -89,6 +90,7 @@ void __init mx35_map_io(void)
        iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
 }
+#endif
 void __init mx31_init_irq(void)
 {
diff --git a/arch/arm/mach-nomadik/Kconfig b/arch/arm/mach-nomadik/Kconfig
index 2a02b49c40f0..3c5e0f522e9c 100644
--- a/arch/arm/mach-nomadik/Kconfig
+++ b/arch/arm/mach-nomadik/Kconfig
@@ -5,13 +5,13 @@ menu "Nomadik boards"
 config MACH_NOMADIK_8815NHK
        bool "ST 8815 Nomadik Hardware Kit (evaluation board)"
        select NOMADIK_8815
+        select HAS_MTU
 endmenu
 config NOMADIK_8815
        bool
 config I2C_BITBANG_8815NHK
        tristate "Driver for bit-bang busses found on the 8815 NHK"
        depends on I2C && MACH_NOMADIK_8815NHK
diff --git a/arch/arm/mach-nomadik/Makefile b/arch/arm/mach-nomadik/Makefile
index 412040982a40..36f67fb207d2 100644
--- a/arch/arm/mach-nomadik/Makefile
+++ b/arch/arm/mach-nomadik/Makefile
@@ -7,7 +7,7 @@
 # Object file lists.
-obj-y                   += clock.o timer.o gpio.o
+obj-y                   += clock.o gpio.o
 # Cpu revision
 obj-$(CONFIG_NOMADIK_8815) += cpu-8815.o
diff --git a/arch/arm/mach-nomadik/board-nhk8815.c b/arch/arm/mach-nomadik/board-nhk8815.c
index 6bfd537d5afb..116394484e71 100644
--- a/arch/arm/mach-nomadik/board-nhk8815.c
+++ b/arch/arm/mach-nomadik/board-nhk8815.c
@@ -25,11 +25,18 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/flash.h>
+#include <plat/mtu.h>
 #include <mach/setup.h>
 #include <mach/nand.h>
 #include <mach/fsmc.h>
 #include "clock.h"
+/* Initial value for SRC control register: all timers use MXTAL/8 source */
+#define SRC_CR_INIT_MASK        0x00007fff
+#define SRC_CR_INIT_VAL         0x2aaa8000
 /* These adresses span 16MB, so use three individual pages */
 static struct resource nhk8815_nand_resources[] = {
        {
@@ -239,6 +246,26 @@ static struct platform_device *nhk8815_platform_devices[] __initdata = {
        /* will add more devices */
 };
+static void __init nomadik_timer_init(void)
+{
+        u32 src_cr;
+        /* Configure timer sources in "system reset controller" ctrl reg */
+        src_cr = readl(io_p2v(NOMADIK_SRC_BASE));
+        src_cr &= SRC_CR_INIT_MASK;
+        src_cr |= SRC_CR_INIT_VAL;
+        writel(src_cr, io_p2v(NOMADIK_SRC_BASE));
+        /* Save global pointer to mtu, used by platform timer code */
+        mtu_base = io_p2v(NOMADIK_MTU0_BASE);
+        nmdk_timer_init();
+}
+static struct sys_timer nomadik_timer = {
+        .init   = nomadik_timer_init,
+};
 static void __init nhk8815_platform_init(void)
 {
        int i;
diff --git a/arch/arm/mach-nomadik/include/mach/setup.h b/arch/arm/mach-nomadik/include/mach/setup.h
index a4e468cf63da..b7897edf1f35 100644
--- a/arch/arm/mach-nomadik/include/mach/setup.h
+++ b/arch/arm/mach-nomadik/include/mach/setup.h
@@ -15,7 +15,7 @@
 extern void cpu8815_map_io(void);
 extern void cpu8815_platform_init(void);
 extern void cpu8815_init_irq(void);
-extern struct sys_timer nomadik_timer;
+extern void nmdk_timer_init(void);
 #endif /* NOMADIK_8815 */
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index 42920f9c1a11..8ad5cc3e83e3 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -219,6 +219,10 @@ static struct platform_device *ams_delta_devices[] __initdata = {
 static void __init ams_delta_init(void)
 {
+        /* mux pins for uarts */
+        omap_cfg_reg(UART1_TX);
+        omap_cfg_reg(UART1_RTS);
        iotable_init(ams_delta_io_desc, ARRAY_SIZE(ams_delta_io_desc));
        omap_board_config = ams_delta_config;
@@ -231,6 +235,8 @@ static void __init ams_delta_init(void)
        omap_usb_init(&ams_delta_usb_config);
        platform_add_devices(ams_delta_devices, ARRAY_SIZE(ams_delta_devices));
+        omap_writew(omap_readw(ARM_RSTCT1) | 0x0004, ARM_RSTCT1);
 }
 static struct plat_serial8250_port ams_delta_modem_ports[] = {
diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c
index fb47239da72f..6c8a41f20e51 100644
--- a/arch/arm/mach-omap1/board-generic.c
+++ b/arch/arm/mach-omap1/board-generic.c
@@ -64,6 +64,14 @@ static void __init omap_generic_init(void)
 {
 #ifdef CONFIG_ARCH_OMAP15XX
        if (cpu_is_omap15xx()) {
+                /* mux pins for uarts */
+                omap_cfg_reg(UART1_TX);
+                omap_cfg_reg(UART1_RTS);
+                omap_cfg_reg(UART2_TX);
+                omap_cfg_reg(UART2_RTS);
+                omap_cfg_reg(UART3_TX);
+                omap_cfg_reg(UART3_RX);
                omap_usb_init(&generic1510_usb_config);
        }
 #endif
diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c
index cc2abbb2d0f4..cd6c39514826 100644
--- a/arch/arm/mach-omap1/board-innovator.c
+++ b/arch/arm/mach-omap1/board-innovator.c
@@ -376,6 +376,26 @@ static void __init innovator_init(void)
 {
 #ifdef CONFIG_ARCH_OMAP15XX
        if (cpu_is_omap1510()) {
+                unsigned char reg;
+                /* mux pins for uarts */
+                omap_cfg_reg(UART1_TX);
+                omap_cfg_reg(UART1_RTS);
+                omap_cfg_reg(UART2_TX);
+                omap_cfg_reg(UART2_RTS);
+                omap_cfg_reg(UART3_TX);
+                omap_cfg_reg(UART3_RX);
+                reg = fpga_read(OMAP1510_FPGA_POWER);
+                reg |= OMAP1510_FPGA_PCR_COM1_EN;
+                fpga_write(reg, OMAP1510_FPGA_POWER);
+                udelay(10);
+                reg = fpga_read(OMAP1510_FPGA_POWER);
+                reg |= OMAP1510_FPGA_PCR_COM2_EN;
+                fpga_write(reg, OMAP1510_FPGA_POWER);
+                udelay(10);
                platform_add_devices(innovator1510_devices, ARRAY_SIZE(innovator1510_devices));
                spi_register_board_info(innovator1510_boardinfo,
                                ARRAY_SIZE(innovator1510_boardinfo));
diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c
index 90dd0431b0dc..4de258420f39 100644
--- a/arch/arm/mach-omap1/board-palmte.c
+++ b/arch/arm/mach-omap1/board-palmte.c
@@ -342,6 +342,14 @@ static void __init palmte_misc_gpio_setup(void)
 static void __init omap_palmte_init(void)
 {
+        /* mux pins for uarts */
+        omap_cfg_reg(UART1_TX);
+        omap_cfg_reg(UART1_RTS);
+        omap_cfg_reg(UART2_TX);
+        omap_cfg_reg(UART2_RTS);
+        omap_cfg_reg(UART3_TX);
+        omap_cfg_reg(UART3_RX);
        omap_board_config = palmte_config;
        omap_board_config_size = ARRAY_SIZE(palmte_config);
diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c
index 8256139891ff..d972cf941b76 100644
--- a/arch/arm/mach-omap1/board-palmtt.c
+++ b/arch/arm/mach-omap1/board-palmtt.c
@@ -289,6 +289,14 @@ static void __init omap_mpu_wdt_mode(int mode) {
 static void __init omap_palmtt_init(void)
 {
+        /* mux pins for uarts */
+        omap_cfg_reg(UART1_TX);
+        omap_cfg_reg(UART1_RTS);
+        omap_cfg_reg(UART2_TX);
+        omap_cfg_reg(UART2_RTS);
+        omap_cfg_reg(UART3_TX);
+        omap_cfg_reg(UART3_RX);
        omap_mpu_wdt_mode(0);
        omap_board_config = palmtt_config;
diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c
index 81b6bde1c5a3..986bd4df0e97 100644
--- a/arch/arm/mach-omap1/board-palmz71.c
+++ b/arch/arm/mach-omap1/board-palmz71.c
@@ -307,6 +307,14 @@ palmz71_gpio_setup(int early)
 static void __init
 omap_palmz71_init(void)
 {
+        /* mux pins for uarts */
+        omap_cfg_reg(UART1_TX);
+        omap_cfg_reg(UART1_RTS);
+        omap_cfg_reg(UART2_TX);
+        omap_cfg_reg(UART2_RTS);
+        omap_cfg_reg(UART3_TX);
+        omap_cfg_reg(UART3_RX);
        palmz71_gpio_setup(1);
        omap_mpu_wdt_mode(0);
diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c
index 02c85ca2e1df..056ae64e0f55 100644
--- a/arch/arm/mach-omap1/board-sx1.c
+++ b/arch/arm/mach-omap1/board-sx1.c
@@ -377,6 +377,14 @@ static struct omap_board_config_kernel sx1_config[] __initdata = {
 static void __init omap_sx1_init(void)
 {
+        /* mux pins for uarts */
+        omap_cfg_reg(UART1_TX);
+        omap_cfg_reg(UART1_RTS);
+        omap_cfg_reg(UART2_TX);
+        omap_cfg_reg(UART2_RTS);
+        omap_cfg_reg(UART3_TX);
+        omap_cfg_reg(UART3_RX);
        platform_add_devices(sx1_devices, ARRAY_SIZE(sx1_devices));
        omap_board_config = sx1_config;
diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c
index c06e7a553472..07b07522d5bf 100644
--- a/arch/arm/mach-omap1/board-voiceblue.c
+++ b/arch/arm/mach-omap1/board-voiceblue.c
@@ -152,6 +152,14 @@ static void __init voiceblue_init_irq(void)
 static void __init voiceblue_init(void)
 {
+        /* mux pins for uarts */
+        omap_cfg_reg(UART1_TX);
+        omap_cfg_reg(UART1_RTS);
+        omap_cfg_reg(UART2_TX);
+        omap_cfg_reg(UART2_RTS);
+        omap_cfg_reg(UART3_TX);
+        omap_cfg_reg(UART3_RX);
        /* Watchdog */
        gpio_request(0, "Watchdog");
        /* smc91x reset */
diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c
index d496e50fec40..d23979bc0fd5 100644
--- a/arch/arm/mach-omap1/serial.c
+++ b/arch/arm/mach-omap1/serial.c
@@ -131,8 +131,6 @@ void __init omap_serial_init(void)
        }
        for (i = 0; i < OMAP_MAX_NR_PORTS; i++) {
-                unsigned char reg;
                switch (i) {
                case 0:
                        uart1_ck = clk_get(NULL, "uart1_ck");
@@ -143,16 +141,6 @@ void __init omap_serial_init(void)
                                if (cpu_is_omap15xx())
                                        clk_set_rate(uart1_ck, 12000000);
                        }
-                        if (cpu_is_omap15xx()) {
-                                omap_cfg_reg(UART1_TX);
-                                omap_cfg_reg(UART1_RTS);
-                                if (machine_is_omap_innovator()) {
-                                        reg = fpga_read(OMAP1510_FPGA_POWER);
-                                        reg |= OMAP1510_FPGA_PCR_COM1_EN;
-                                        fpga_write(reg, OMAP1510_FPGA_POWER);
-                                        udelay(10);
-                                }
-                        }
                        break;
                case 1:
                        uart2_ck = clk_get(NULL, "uart2_ck");
@@ -165,16 +153,6 @@ void __init omap_serial_init(void)
                                else
                                        clk_set_rate(uart2_ck, 48000000);
                        }
-                        if (cpu_is_omap15xx()) {
-                                omap_cfg_reg(UART2_TX);
-                                omap_cfg_reg(UART2_RTS);
-                                if (machine_is_omap_innovator()) {
-                                        reg = fpga_read(OMAP1510_FPGA_POWER);
-                                        reg |= OMAP1510_FPGA_PCR_COM2_EN;
-                                        fpga_write(reg, OMAP1510_FPGA_POWER);
-                                        udelay(10);
-                                }
-                        }
                        break;
                case 2:
                        uart3_ck = clk_get(NULL, "uart3_ck");
@@ -185,10 +163,6 @@ void __init omap_serial_init(void)
                                if (cpu_is_omap15xx())
                                        clk_set_rate(uart3_ck, 12000000);
                        }
-                        if (cpu_is_omap15xx()) {
-                                omap_cfg_reg(UART3_TX);
-                                omap_cfg_reg(UART3_RX);
-                        }
                        break;
                }
                omap_serial_reset(&serial_platform_data[i]);
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 75b1c7efae7e..6f1bbbc4d15f 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -73,9 +73,21 @@ config MACH_OMAP_3430SDP
        bool "OMAP 3430 SDP board"
        depends on ARCH_OMAP3 && ARCH_OMAP34XX
+config MACH_NOKIA_N800
+       bool
+config MACH_NOKIA_N810
+       bool
+config MACH_NOKIA_N810_WIMAX
+       bool
 config MACH_NOKIA_N8X0
        bool "Nokia N800/N810"
        depends on ARCH_OMAP2420
+        select MACH_NOKIA_N800
+        select MACH_NOKIA_N810
+        select MACH_NOKIA_N810_WIMAX
 config MACH_NOKIA_RX51
        bool "Nokia RX-51 board"
@@ -88,3 +100,11 @@ config MACH_OMAP_ZOOM2
 config MACH_OMAP_4430SDP
        bool "OMAP 4430 SDP board"
        depends on ARCH_OMAP4
+config OMAP3_EMU
+        bool "OMAP3 debugging peripherals"
+        depends on ARCH_OMAP3
+        select OC_ETM
+        help
+          Say Y here to enable debugging hardware of omap3
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 8cb16777661a..e141cabcfcce 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -44,6 +44,9 @@ obj-$(CONFIG_ARCH_OMAP4)		+= cm4xxx.o
 obj-$(CONFIG_ARCH_OMAP2)                += clock24xx.o
 obj-$(CONFIG_ARCH_OMAP3)                += clock34xx.o
+# EMU peripherals
+obj-$(CONFIG_OMAP3_EMU)         += emu.o
 iommu-y                                 += iommu2.o
 iommu-$(CONFIG_ARCH_OMAP3)              += omap3-iommu.o
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index efaf053eba85..0acb5560229c 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -17,6 +17,7 @@
 #include <linux/platform_device.h>
 #include <linux/delay.h>
 #include <linux/input.h>
+#include <linux/input/matrix_keypad.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
 #include <linux/i2c/twl4030.h>
@@ -38,7 +39,6 @@
 #include <mach/gpmc.h>
 #include <mach/control.h>
-#include <mach/keypad.h>
 #include <mach/gpmc-smc91x.h>
 #include "sdram-qimonda-hyb18m512160af-6.h"
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index eb37c40ea83a..609a5a4a7e29 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -58,6 +58,8 @@ static void __init gic_init_irq(void)
 static void __init omap_4430sdp_init_irq(void)
 {
+        omap_board_config = sdp4430_config;
+        omap_board_config_size = ARRAY_SIZE(sdp4430_config);
        omap2_init_common_hw(NULL, NULL);
 #ifdef CONFIG_OMAP_32K_TIMER
        omap2_gp_clockevent_set_gptimer(1);
@@ -70,8 +72,6 @@ static void __init omap_4430sdp_init_irq(void)
 static void __init omap_4430sdp_init(void)
 {
        platform_add_devices(sdp4430_devices, ARRAY_SIZE(sdp4430_devices));
-        omap_board_config = sdp4430_config;
-        omap_board_config_size = ARRAY_SIZE(sdp4430_config);
        omap_serial_init();
 }
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index d110a7fdfbd8..d57ec2f4d0a9 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -16,6 +16,7 @@
 #include <linux/platform_device.h>
 #include <linux/delay.h>
 #include <linux/input.h>
+#include <linux/input/matrix_keypad.h>
 #include <linux/gpio_keys.h>
 #include <linux/workqueue.h>
 #include <linux/err.h>
@@ -41,7 +42,6 @@
 #include <asm/delay.h>
 #include <mach/control.h>
 #include <mach/usb.h>
-#include <mach/keypad.h>
 #include "mmc-twl4030.h"
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 70df6b4dbcd4..08b0816afa61 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -162,7 +162,7 @@ static int beagle_twl_gpio_setup(struct device *dev,
        /* TWL4030_GPIO_MAX + 0 == ledA, EHCI nEN_USB_PWR (out, active low) */
        gpio_request(gpio + TWL4030_GPIO_MAX, "nEN_USB_PWR");
-        gpio_direction_output(gpio + TWL4030_GPIO_MAX, 1);
+        gpio_direction_output(gpio + TWL4030_GPIO_MAX, 0);
        /* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */
        gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index e4ec0c591216..4c4d7f8dbd72 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -20,6 +20,7 @@
 #include <linux/clk.h>
 #include <linux/gpio.h>
 #include <linux/input.h>
+#include <linux/input/matrix_keypad.h>
 #include <linux/leds.h>
 #include <linux/spi/spi.h>
@@ -37,7 +38,6 @@
 #include <mach/usb.h>
 #include <mach/common.h>
 #include <mach/mcspi.h>
-#include <mach/keypad.h>
 #include "sdram-micron-mt46h32m32lf-6.h"
 #include "mmc-twl4030.h"
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index 7f6bf8772af7..7519edb69155 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -27,6 +27,7 @@
 #include <linux/i2c/twl4030.h>
 #include <linux/leds.h>
 #include <linux/input.h>
+#include <linux/input/matrix_keypad.h>
 #include <linux/gpio_keys.h>
 #include <asm/mach-types.h>
@@ -39,7 +40,6 @@
 #include <mach/hardware.h>
 #include <mach/mcspi.h>
 #include <mach/usb.h>
-#include <mach/keypad.h>
 #include <mach/mux.h>
 #include "sdram-micron-mt46h32m32lf-6.h"
@@ -134,50 +134,50 @@ static void __init pandora_keys_gpio_init(void)
 }
 static int board_keymap[] = {
-        /* col, row, code */
+        /* row, col, code */
        KEY(0, 0, KEY_9),
-        KEY(0, 1, KEY_0),
+        KEY(0, 1, KEY_8),
-        KEY(0, 2, KEY_BACKSPACE),
+        KEY(0, 2, KEY_I),
-        KEY(0, 3, KEY_O),
+        KEY(0, 3, KEY_J),
-        KEY(0, 4, KEY_P),
+        KEY(0, 4, KEY_N),
-        KEY(0, 5, KEY_K),
+        KEY(0, 5, KEY_M),
-        KEY(0, 6, KEY_L),
+        KEY(1, 0, KEY_0),
-        KEY(0, 7, KEY_ENTER),
-        KEY(1, 0, KEY_8),
        KEY(1, 1, KEY_7),
-        KEY(1, 2, KEY_6),
+        KEY(1, 2, KEY_U),
-        KEY(1, 3, KEY_5),
+        KEY(1, 3, KEY_H),
-        KEY(1, 4, KEY_4),
+        KEY(1, 4, KEY_B),
-        KEY(1, 5, KEY_3),
+        KEY(1, 5, KEY_SPACE),
-        KEY(1, 6, KEY_2),
+        KEY(2, 0, KEY_BACKSPACE),
-        KEY(1, 7, KEY_1),
+        KEY(2, 1, KEY_6),
-        KEY(2, 0, KEY_I),
-        KEY(2, 1, KEY_U),
        KEY(2, 2, KEY_Y),
-        KEY(2, 3, KEY_T),
+        KEY(2, 3, KEY_G),
-        KEY(2, 4, KEY_R),
+        KEY(2, 4, KEY_V),
-        KEY(2, 5, KEY_E),
+        KEY(2, 5, KEY_FN),
-        KEY(2, 6, KEY_W),
+        KEY(3, 0, KEY_O),
-        KEY(2, 7, KEY_Q),
+        KEY(3, 1, KEY_5),
-        KEY(3, 0, KEY_J),
+        KEY(3, 2, KEY_T),
-        KEY(3, 1, KEY_H),
-        KEY(3, 2, KEY_G),
        KEY(3, 3, KEY_F),
-        KEY(3, 4, KEY_D),
+        KEY(3, 4, KEY_C),
-        KEY(3, 5, KEY_S),
+        KEY(4, 0, KEY_P),
-        KEY(3, 6, KEY_A),
+        KEY(4, 1, KEY_4),
-        KEY(3, 7, KEY_LEFTSHIFT),
+        KEY(4, 2, KEY_R),
-        KEY(4, 0, KEY_N),
+        KEY(4, 3, KEY_D),
-        KEY(4, 1, KEY_B),
-        KEY(4, 2, KEY_V),
-        KEY(4, 3, KEY_C),
        KEY(4, 4, KEY_X),
-        KEY(4, 5, KEY_Z),
+        KEY(5, 0, KEY_K),
-        KEY(4, 6, KEY_DOT),
+        KEY(5, 1, KEY_3),
-        KEY(4, 7, KEY_COMMA),
+        KEY(5, 2, KEY_E),
-        KEY(5, 0, KEY_M),
+        KEY(5, 3, KEY_S),
-        KEY(5, 1, KEY_SPACE),
+        KEY(5, 4, KEY_Z),
-        KEY(5, 2, KEY_FN),
+        KEY(6, 0, KEY_L),
+        KEY(6, 1, KEY_2),
+        KEY(6, 2, KEY_W),
+        KEY(6, 3, KEY_A),
+        KEY(6, 4, KEY_DOT),
+        KEY(7, 0, KEY_ENTER),
+        KEY(7, 1, KEY_1),
+        KEY(7, 2, KEY_Q),
+        KEY(7, 3, KEY_LEFTSHIFT),
+        KEY(7, 4, KEY_COMMA),
 };
 static struct matrix_keymap_data board_map_data = {
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index 2b0eb1ba5d7f..e34d96a825e3 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -12,6 +12,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/input.h>
+#include <linux/input/matrix_keypad.h>
 #include <linux/spi/spi.h>
 #include <linux/i2c.h>
 #include <linux/i2c/twl4030.h>
@@ -27,7 +28,6 @@
 #include <mach/common.h>
 #include <mach/dma.h>
 #include <mach/gpmc.h>
-#include <mach/keypad.h>
 #include <mach/onenand.h>
 #include <mach/gpmc-smc91x.h>
diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c
index f9196c3b1a7b..78869a9a1cc2 100644
--- a/arch/arm/mach-omap2/board-rx51.c
+++ b/arch/arm/mach-omap2/board-rx51.c
@@ -26,7 +26,6 @@
 #include <mach/mux.h>
 #include <mach/board.h>
 #include <mach/common.h>
-#include <mach/keypad.h>
 #include <mach/dma.h>
 #include <mach/gpmc.h>
 #include <mach/usb.h>
diff --git a/arch/arm/mach-omap2/board-zoom2.c b/arch/arm/mach-omap2/board-zoom2.c
index fd3369d5e5cb..51e0b3ba5f3a 100644
--- a/arch/arm/mach-omap2/board-zoom2.c
+++ b/arch/arm/mach-omap2/board-zoom2.c
@@ -13,6 +13,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/input.h>
+#include <linux/input/matrix_keypad.h>
 #include <linux/gpio.h>
 #include <linux/i2c/twl4030.h>
 #include <linux/regulator/machine.h>
@@ -22,7 +23,6 @@
 #include <mach/common.h>
 #include <mach/usb.h>
-#include <mach/keypad.h>
 #include "mmc-twl4030.h"
 #include "sdram-micron-mt46h32m32lf-6.h"
@@ -30,57 +30,56 @@
 /* Zoom2 has Qwerty keyboard*/
 static int board_keymap[] = {
        KEY(0, 0, KEY_E),
-        KEY(1, 0, KEY_R),
+        KEY(0, 1, KEY_R),
-        KEY(2, 0, KEY_T),
+        KEY(0, 2, KEY_T),
-        KEY(3, 0, KEY_HOME),
+        KEY(0, 3, KEY_HOME),
-        KEY(6, 0, KEY_I),
+        KEY(0, 6, KEY_I),
-        KEY(7, 0, KEY_LEFTSHIFT),
+        KEY(0, 7, KEY_LEFTSHIFT),
-        KEY(0, 1, KEY_D),
+        KEY(1, 0, KEY_D),
        KEY(1, 1, KEY_F),
-        KEY(2, 1, KEY_G),
+        KEY(1, 2, KEY_G),
-        KEY(3, 1, KEY_SEND),
+        KEY(1, 3, KEY_SEND),
-        KEY(6, 1, KEY_K),
+        KEY(1, 6, KEY_K),
-        KEY(7, 1, KEY_ENTER),
+        KEY(1, 7, KEY_ENTER),
-        KEY(0, 2, KEY_X),
+        KEY(2, 0, KEY_X),
-        KEY(1, 2, KEY_C),
+        KEY(2, 1, KEY_C),
        KEY(2, 2, KEY_V),
-        KEY(3, 2, KEY_END),
+        KEY(2, 3, KEY_END),
-        KEY(6, 2, KEY_DOT),
+        KEY(2, 6, KEY_DOT),
-        KEY(7, 2, KEY_CAPSLOCK),
+        KEY(2, 7, KEY_CAPSLOCK),
-        KEY(0, 3, KEY_Z),
+        KEY(3, 0, KEY_Z),
-        KEY(1, 3, KEY_KPPLUS),
+        KEY(3, 1, KEY_KPPLUS),
-        KEY(2, 3, KEY_B),
+        KEY(3, 2, KEY_B),
        KEY(3, 3, KEY_F1),
-        KEY(6, 3, KEY_O),
+        KEY(3, 6, KEY_O),
-        KEY(7, 3, KEY_SPACE),
+        KEY(3, 7, KEY_SPACE),
-        KEY(0, 4, KEY_W),
+        KEY(4, 0, KEY_W),
-        KEY(1, 4, KEY_Y),
+        KEY(4, 1, KEY_Y),
-        KEY(2, 4, KEY_U),
+        KEY(4, 2, KEY_U),
-        KEY(3, 4, KEY_F2),
+        KEY(4, 3, KEY_F2),
        KEY(4, 4, KEY_VOLUMEUP),
-        KEY(6, 4, KEY_L),
+        KEY(4, 6, KEY_L),
-        KEY(7, 4, KEY_LEFT),
+        KEY(4, 7, KEY_LEFT),
-        KEY(0, 5, KEY_S),
+        KEY(5, 0, KEY_S),
-        KEY(1, 5, KEY_H),
+        KEY(5, 1, KEY_H),
-        KEY(2, 5, KEY_J),
+        KEY(5, 2, KEY_J),
-        KEY(3, 5, KEY_F3),
+        KEY(5, 3, KEY_F3),
        KEY(5, 5, KEY_VOLUMEDOWN),
-        KEY(6, 5, KEY_M),
+        KEY(5, 6, KEY_M),
-        KEY(4, 5, KEY_ENTER),
+        KEY(5, 7, KEY_ENTER),
-        KEY(7, 5, KEY_RIGHT),
+        KEY(6, 0, KEY_Q),
-        KEY(0, 6, KEY_Q),
+        KEY(6, 1, KEY_A),
-        KEY(1, 6, KEY_A),
+        KEY(6, 2, KEY_N),
-        KEY(2, 6, KEY_N),
+        KEY(6, 3, KEY_BACKSPACE),
-        KEY(3, 6, KEY_BACKSPACE),
        KEY(6, 6, KEY_P),
-        KEY(7, 6, KEY_UP),
        KEY(6, 7, KEY_SELECT),
-        KEY(7, 7, KEY_DOWN),
+        KEY(7, 0, KEY_PROG1),   /*MACRO 1 <User defined> */
-        KEY(0, 7, KEY_PROG1),   /*MACRO 1 <User defined> */
+        KEY(7, 1, KEY_PROG2),   /*MACRO 2 <User defined> */
-        KEY(1, 7, KEY_PROG2),   /*MACRO 2 <User defined> */
+        KEY(7, 2, KEY_PROG3),   /*MACRO 3 <User defined> */
-        KEY(2, 7, KEY_PROG3),   /*MACRO 3 <User defined> */
+        KEY(7, 3, KEY_PROG4),   /*MACRO 4 <User defined> */
-        KEY(3, 7, KEY_PROG4),   /*MACRO 4 <User defined> */
+        KEY(7, 5, KEY_RIGHT),
-        0
+        KEY(7, 6, KEY_UP),
+        KEY(7, 7, KEY_DOWN)
 };
 static struct matrix_keymap_data board_map_data = {
diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c
index 489556eecbd1..066e88a18824 100644
--- a/arch/arm/mach-omap2/clock34xx.c
+++ b/arch/arm/mach-omap2/clock34xx.c
@@ -119,7 +119,7 @@ static struct omap_clk omap34xx_clks[] = {
        CLK(NULL,       "dpll3_m2x2_ck", &dpll3_m2x2_ck, CK_343X),
        CLK(NULL,       "dpll3_m3_ck",  &dpll3_m3_ck,   CK_343X),
        CLK(NULL,       "dpll3_m3x2_ck", &dpll3_m3x2_ck, CK_343X),
-        CLK(NULL,       "emu_core_alwon_ck", &emu_core_alwon_ck, CK_343X),
+        CLK("etb",      "emu_core_alwon_ck", &emu_core_alwon_ck, CK_343X),
        CLK(NULL,       "dpll4_ck",     &dpll4_ck,      CK_343X),
        CLK(NULL,       "dpll4_x2_ck",  &dpll4_x2_ck,   CK_343X),
        CLK(NULL,       "omap_96m_alwon_fck", &omap_96m_alwon_fck, CK_343X),
@@ -138,7 +138,7 @@ static struct omap_clk omap34xx_clks[] = {
        CLK(NULL,       "dpll4_m5x2_ck", &dpll4_m5x2_ck, CK_343X),
        CLK(NULL,       "dpll4_m6_ck",  &dpll4_m6_ck,   CK_343X),
        CLK(NULL,       "dpll4_m6x2_ck", &dpll4_m6x2_ck, CK_343X),
-        CLK(NULL,       "emu_per_alwon_ck", &emu_per_alwon_ck, CK_343X),
+        CLK("etb",      "emu_per_alwon_ck", &emu_per_alwon_ck, CK_343X),
        CLK(NULL,       "dpll5_ck",     &dpll5_ck,      CK_3430ES2),
        CLK(NULL,       "dpll5_m2_ck",  &dpll5_m2_ck,   CK_3430ES2),
        CLK(NULL,       "clkout2_src_ck", &clkout2_src_ck, CK_343X),
@@ -147,7 +147,7 @@ static struct omap_clk omap34xx_clks[] = {
        CLK(NULL,       "dpll1_fck",    &dpll1_fck,     CK_343X),
        CLK(NULL,       "mpu_ck",       &mpu_ck,        CK_343X),
        CLK(NULL,       "arm_fck",      &arm_fck,       CK_343X),
-        CLK(NULL,       "emu_mpu_alwon_ck", &emu_mpu_alwon_ck, CK_343X),
+        CLK("etb",      "emu_mpu_alwon_ck", &emu_mpu_alwon_ck, CK_343X),
        CLK(NULL,       "dpll2_fck",    &dpll2_fck,     CK_343X),
        CLK(NULL,       "iva2_ck",      &iva2_ck,       CK_343X),
        CLK(NULL,       "l3_ick",       &l3_ick,        CK_343X),
@@ -302,7 +302,7 @@ static struct omap_clk omap34xx_clks[] = {
        CLK("omap-mcbsp.2", "fck",      &mcbsp2_fck,    CK_343X),
        CLK("omap-mcbsp.3", "fck",      &mcbsp3_fck,    CK_343X),
        CLK("omap-mcbsp.4", "fck",      &mcbsp4_fck,    CK_343X),
-        CLK(NULL,       "emu_src_ck",   &emu_src_ck,    CK_343X),
+        CLK("etb",      "emu_src_ck",   &emu_src_ck,    CK_343X),
        CLK(NULL,       "pclk_fck",     &pclk_fck,      CK_343X),
        CLK(NULL,       "pclkx2_fck",   &pclkx2_fck,    CK_343X),
        CLK(NULL,       "atclk_fck",    &atclk_fck,     CK_343X),
@@ -473,7 +473,7 @@ static u16 _omap3_dpll_compute_freqsel(struct clk *clk, u8 n)
        unsigned long fint;
        u16 f = 0;
-        fint = clk->dpll_data->clk_ref->rate / (n + 1);
+        fint = clk->dpll_data->clk_ref->rate / n;
        pr_debug("clock: fint is %lu\n", fint);
diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h
index c8119781e00a..9565c05bebd2 100644
--- a/arch/arm/mach-omap2/clock34xx.h
+++ b/arch/arm/mach-omap2/clock34xx.h
@@ -489,9 +489,9 @@ static struct clk core_ck = {
 static struct clk dpll3_m2x2_ck = {
        .name           = "dpll3_m2x2_ck",
        .ops            = &clkops_null,
-        .parent         = &dpll3_x2_ck,
+        .parent         = &dpll3_m2_ck,
        .clkdm_name     = "dpll3_clkdm",
-        .recalc         = &followparent_recalc,
+        .recalc         = &omap3_clkoutx2_recalc,
 };
 /* The PWRDN bit is apparently only available on 3430ES2 and above */
diff --git a/arch/arm/mach-omap2/emu.c b/arch/arm/mach-omap2/emu.c
new file mode 100644
index 000000000000..ec0d984a26fc
--- /dev/null
+++ b/arch/arm/mach-omap2/emu.c
@@ -0,0 +1,66 @@
+/*
+ * emu.c
+ *
+ * ETM and ETB CoreSight components' resources as found in OMAP3xxx.
+ *
+ * Copyright (C) 2009 Nokia Corporation.
+ * Alexander Shishkin
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/amba/bus.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Alexander Shishkin");
+/* Cortex CoreSight components within omap3xxx EMU */
+#define ETM_BASE        (L4_EMU_34XX_PHYS + 0x10000)
+#define DBG_BASE        (L4_EMU_34XX_PHYS + 0x11000)
+#define ETB_BASE        (L4_EMU_34XX_PHYS + 0x1b000)
+#define DAPCTL          (L4_EMU_34XX_PHYS + 0x1d000)
+static struct amba_device omap3_etb_device = {
+        .dev            = {
+                .init_name = "etb",
+        },
+        .res            = {
+                .start  = ETB_BASE,
+                .end    = ETB_BASE + SZ_4K - 1,
+                .flags  = IORESOURCE_MEM,
+        },
+        .periphid       = 0x000bb907,
+};
+static struct amba_device omap3_etm_device = {
+        .dev            = {
+                .init_name = "etm",
+        },
+        .res            = {
+                .start  = ETM_BASE,
+                .end    = ETM_BASE + SZ_4K - 1,
+                .flags  = IORESOURCE_MEM,
+        },
+        .periphid       = 0x102bb921,
+};
+static int __init emu_init(void)
+{
+        amba_device_register(&omap3_etb_device, &iomem_resource);
+        amba_device_register(&omap3_etm_device, &iomem_resource);
+        return 0;
+}
+subsys_initcall(emu_init);
diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index 15876828db23..f3c992e29651 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -366,7 +366,7 @@ int gpmc_cs_request(int cs, unsigned long size, unsigned long *base)
        if (r < 0)
                goto out;
-        gpmc_cs_enable_mem(cs, res->start, res->end - res->start + 1);
+        gpmc_cs_enable_mem(cs, res->start, resource_size(res));
        *base = res->start;
        gpmc_cs_set_reserved(cs, 1);
 out:
@@ -378,7 +378,7 @@ EXPORT_SYMBOL(gpmc_cs_request);
 void gpmc_cs_free(int cs)
 {
        spin_lock(&gpmc_mem_lock);
-        if (cs >= GPMC_CS_NUM || !gpmc_cs_reserved(cs)) {
+        if (cs >= GPMC_CS_NUM || cs < 0 || !gpmc_cs_reserved(cs)) {
                printk(KERN_ERR "Trying to free non-reserved GPMC CS%d\n", cs);
                BUG();
                spin_unlock(&gpmc_mem_lock);
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index e3a3bad1d84f..56be87d13edb 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -302,7 +302,9 @@ void __init omap2_init_common_hw(struct omap_sdrc_params *sdrc_cs0,
        pwrdm_init(powerdomains_omap);
        clkdm_init(clockdomains_omap, clkdm_pwrdm_autodeps);
        omap2_clk_init();
+#endif
        omap_serial_early_init();
+#ifndef CONFIG_ARCH_OMAP4
        omap_hwmod_late_init();
        omap_pm_if_init();
        omap2_sdrc_init(sdrc_cs0, sdrc_cs1);
diff --git a/arch/arm/mach-omap2/mailbox.c b/arch/arm/mach-omap2/mailbox.c
index c035ad3426d0..ef57b38a56a4 100644
--- a/arch/arm/mach-omap2/mailbox.c
+++ b/arch/arm/mach-omap2/mailbox.c
@@ -300,7 +300,7 @@ static int __devinit omap2_mbox_probe(struct platform_device *pdev)
                dev_err(&pdev->dev, "invalid mem resource\n");
                return -ENODEV;
        }
-        mbox_base = ioremap(res->start, res->end - res->start);
+        mbox_base = ioremap(res->start, resource_size(res));
        if (!mbox_base)
                return -ENOMEM;
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 378c2f618358..89463190923a 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -639,14 +639,15 @@ static void __init prcm_setup_regs(void)
        prm_write_mod_reg(OMAP3430_IO_EN | OMAP3430_WKUP_EN,
                          OCP_MOD, OMAP3_PRM_IRQENABLE_MPU_OFFSET);
-        /* Enable GPIO wakeups in PER */
+        /* Enable wakeups in PER */
        prm_write_mod_reg(OMAP3430_EN_GPIO2 | OMAP3430_EN_GPIO3 |
                          OMAP3430_EN_GPIO4 | OMAP3430_EN_GPIO5 |
-                          OMAP3430_EN_GPIO6, OMAP3430_PER_MOD, PM_WKEN);
+                          OMAP3430_EN_GPIO6 | OMAP3430_EN_UART3,
+                          OMAP3430_PER_MOD, PM_WKEN);
        /* and allow them to wake up MPU */
        prm_write_mod_reg(OMAP3430_GRPSEL_GPIO2 | OMAP3430_EN_GPIO3 |
                          OMAP3430_GRPSEL_GPIO4 | OMAP3430_EN_GPIO5 |
-                          OMAP3430_GRPSEL_GPIO6,
+                          OMAP3430_GRPSEL_GPIO6 | OMAP3430_EN_UART3,
                          OMAP3430_PER_MOD, OMAP3430_PM_MPUGRPSEL);
        /* Don't attach IVA interrupts */
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index ae2186892c85..54dfeb5d5667 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -109,16 +109,6 @@ static struct plat_serial8250_port serial_platform_data2[] = {
                .regshift       = 2,
                .uartclk        = OMAP24XX_BASE_BAUD * 16,
        }, {
-#ifdef CONFIG_ARCH_OMAP4
-                .membase        = OMAP2_IO_ADDRESS(OMAP_UART4_BASE),
-                .mapbase        = OMAP_UART4_BASE,
-                .irq            = 70,
-                .flags          = UPF_BOOT_AUTOCONF,
-                .iotype         = UPIO_MEM,
-                .regshift       = 2,
-                .uartclk        = OMAP24XX_BASE_BAUD * 16,
-        }, {
-#endif
                .flags          = 0
        }
 };
diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c
index aac2cda60e09..102916f1e465 100644
--- a/arch/arm/mach-pxa/cm-x300.c
+++ b/arch/arm/mach-pxa/cm-x300.c
@@ -43,10 +43,10 @@
 #define CM_X300_ETH_PHYS        0x08000010
-#define GPIO82_MMC2_IRQ         (82)
+#define GPIO82_MMC_IRQ          (82)
-#define GPIO85_MMC2_WP          (85)
+#define GPIO85_MMC_WP           (85)
-#define CM_X300_MMC2_IRQ        IRQ_GPIO(GPIO82_MMC2_IRQ)
+#define CM_X300_MMC_IRQ         IRQ_GPIO(GPIO82_MMC_IRQ)
 #define GPIO95_RTC_CS           (95)
 #define GPIO96_RTC_WR           (96)
@@ -292,37 +292,37 @@ static inline void cm_x300_init_nand(void) {}
 #endif
 #if defined(CONFIG_MMC) || defined(CONFIG_MMC_MODULE)
-/* The first MMC slot of CM-X300 is hardwired to Libertas card and has
+static struct pxamci_platform_data cm_x300_mci_platform_data = {
+        .detect_delay           = 20,
+        .ocr_mask               = MMC_VDD_32_33|MMC_VDD_33_34,
+        .gpio_card_detect       = GPIO82_MMC_IRQ,
+        .gpio_card_ro           = GPIO85_MMC_WP,
+        .gpio_power             = -1,
+};
+/* The second MMC slot of CM-X300 is hardwired to Libertas card and has
   no detection/ro pins */
-static int cm_x300_mci_init(struct device *dev,
+static int cm_x300_mci2_init(struct device *dev,
-                            irq_handler_t cm_x300_detect_int,
+                             irq_handler_t cm_x300_detect_int,
-                            void *data)
+        void *data)
 {
        return 0;
 }
-static void cm_x300_mci_exit(struct device *dev, void *data)
+static void cm_x300_mci2_exit(struct device *dev, void *data)
 {
 }
-static struct pxamci_platform_data cm_x300_mci_platform_data = {
+static struct pxamci_platform_data cm_x300_mci2_platform_data = {
        .detect_delay           = 20,
        .ocr_mask               = MMC_VDD_32_33|MMC_VDD_33_34,
-        .init                   = cm_x300_mci_init,
+        .init                   = cm_x300_mci2_init,
-        .exit                   = cm_x300_mci_exit,
+        .exit                   = cm_x300_mci2_exit,
        .gpio_card_detect       = -1,
        .gpio_card_ro           = -1,
        .gpio_power             = -1,
 };
-static struct pxamci_platform_data cm_x300_mci2_platform_data = {
-        .detect_delay           = 20,
-        .ocr_mask               = MMC_VDD_32_33|MMC_VDD_33_34,
-        .gpio_card_detect       = GPIO82_MMC2_IRQ,
-        .gpio_card_ro           = GPIO85_MMC2_WP,
-        .gpio_power             = -1,
-};
 static void __init cm_x300_init_mmc(void)
 {
        pxa_set_mci_info(&cm_x300_mci_platform_data);
diff --git a/arch/arm/mach-pxa/colibri-pxa320.c b/arch/arm/mach-pxa/colibri-pxa320.c
index 494572825c7d..ec0e14b96682 100644
--- a/arch/arm/mach-pxa/colibri-pxa320.c
+++ b/arch/arm/mach-pxa/colibri-pxa320.c
@@ -27,6 +27,7 @@
 #include <mach/colibri.h>
 #include <mach/pxafb.h>
 #include <mach/ohci.h>
+#include <mach/audio.h>
 #include "generic.h"
 #include "devices.h"
@@ -145,7 +146,8 @@ static void __init colibri_pxa320_init_lcd(void)
 static inline void colibri_pxa320_init_lcd(void) {}
 #endif
-#if defined(SND_AC97_CODEC) || defined(SND_AC97_CODEC_MODULE)
+#if     defined(CONFIG_SND_AC97_CODEC) || \
+        defined(CONFIG_SND_AC97_CODEC_MODULE)
 static mfp_cfg_t colibri_pxa320_ac97_pin_config[] __initdata = {
        GPIO34_AC97_SYSCLK,
        GPIO35_AC97_SDATA_IN_0,
diff --git a/arch/arm/mach-pxa/cpufreq-pxa2xx.c b/arch/arm/mach-pxa/cpufreq-pxa2xx.c
index 983cc8c20081..9e4d9816726a 100644
--- a/arch/arm/mach-pxa/cpufreq-pxa2xx.c
+++ b/arch/arm/mach-pxa/cpufreq-pxa2xx.c
@@ -447,6 +447,7 @@ static __init int pxa_cpufreq_init(struct cpufreq_policy *policy)
                pxa27x_freq_table[i].frequency = freq;
                pxa27x_freq_table[i].index = i;
        }
+        pxa27x_freq_table[i].index = i;
        pxa27x_freq_table[i].frequency = CPUFREQ_TABLE_END;
        /*
diff --git a/arch/arm/mach-pxa/cpufreq-pxa3xx.c b/arch/arm/mach-pxa/cpufreq-pxa3xx.c
index 67f34a8d8e60..149cdd9aee4d 100644
--- a/arch/arm/mach-pxa/cpufreq-pxa3xx.c
+++ b/arch/arm/mach-pxa/cpufreq-pxa3xx.c
@@ -102,7 +102,7 @@ static int setup_freqs_table(struct cpufreq_policy *policy,
                table[i].index = i;
                table[i].frequency = freqs[i].cpufreq_mhz * 1000;
        }
-        table[num].frequency = i;
+        table[num].index = i;
        table[num].frequency = CPUFREQ_TABLE_END;
        pxa3xx_freqs = freqs;
diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c
index abff9e132749..83bd3c6e3884 100644
--- a/arch/arm/mach-pxa/hx4700.c
+++ b/arch/arm/mach-pxa/hx4700.c
@@ -604,7 +604,7 @@ static struct platform_device gpio_vbus = {
 static const struct ads7846_platform_data tsc2046_info = {
        .model            = 7846,
        .vref_delay_usecs = 100,
-        .pressure_max     = 512,
+        .pressure_max     = 1024,
        .debounce_max     = 10,
        .debounce_tol     = 3,
        .debounce_rep     = 1,
diff --git a/arch/arm/mach-pxa/include/mach/entry-macro.S b/arch/arm/mach-pxa/include/mach/entry-macro.S
index 241880608ac6..a73bc86a3c26 100644
--- a/arch/arm/mach-pxa/include/mach/entry-macro.S
+++ b/arch/arm/mach-pxa/include/mach/entry-macro.S
@@ -46,5 +46,6 @@
                beq     1001f
                bic     \irqstat, \irqstat, #0x80000000
                mov     \irqnr, \irqstat, lsr #16
+                add     \irqnr, \irqnr, #(PXA_IRQ(0))
 1001:
                .endm
diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c
index d694ce289668..6112af431fa4 100644
--- a/arch/arm/mach-pxa/irq.c
+++ b/arch/arm/mach-pxa/irq.c
@@ -25,6 +25,8 @@
 #include "generic.h"
+#define MAX_INTERNAL_IRQS       128
 #define IRQ_BIT(n)      (((n) - PXA_IRQ(0)) & 0x1f)
 #define _ICMR(n)        (*((((n) - PXA_IRQ(0)) & ~0x1f) ? &ICMR2 : &ICMR))
 #define _ICLR(n)        (*((((n) - PXA_IRQ(0)) & ~0x1f) ? &ICLR2 : &ICLR))
@@ -122,6 +124,8 @@ void __init pxa_init_irq(int irq_nr, set_wake_t fn)
 {
        int irq, i;
+        BUG_ON(irq_nr > MAX_INTERNAL_IRQS);
        pxa_internal_irq_nr = irq_nr;
        for (irq = PXA_IRQ(0); irq < PXA_IRQ(irq_nr); irq += 32) {
@@ -149,7 +153,8 @@ void __init pxa_init_irq(int irq_nr, set_wake_t fn)
 }
 #ifdef CONFIG_PM
-static unsigned long saved_icmr[2];
+static unsigned long saved_icmr[MAX_INTERNAL_IRQS/32];
+static unsigned long saved_ipr[MAX_INTERNAL_IRQS];
 static int pxa_irq_suspend(struct sys_device *dev, pm_message_t state)
 {
@@ -159,6 +164,8 @@ static int pxa_irq_suspend(struct sys_device *dev, pm_message_t state)
                saved_icmr[i] = _ICMR(irq);
                _ICMR(irq) = 0;
        }
+        for (i = 0; i < pxa_internal_irq_nr; i++)
+                saved_ipr[i] = IPR(i);
        return 0;
 }
@@ -171,6 +178,8 @@ static int pxa_irq_resume(struct sys_device *dev)
                _ICMR(irq) = saved_icmr[i];
                _ICLR(irq) = 0;
        }
+        for (i = 0; i < pxa_internal_irq_nr; i++)
+                IPR(i) = saved_ipr[i];
        ICCR = 1;
        return 0;
diff --git a/arch/arm/mach-pxa/palmtc.c b/arch/arm/mach-pxa/palmtc.c
index bb2cc0dd44ec..0b92291a58f6 100644
--- a/arch/arm/mach-pxa/palmtc.c
+++ b/arch/arm/mach-pxa/palmtc.c
@@ -292,10 +292,10 @@ const static unsigned int palmtc_keypad_col_gpios[] = {
 static struct matrix_keypad_platform_data palmtc_keypad_platform_data = {
        .keymap_data    = &palmtc_keymap_data,
-        .col_gpios      = palmtc_keypad_row_gpios,
+        .row_gpios      = palmtc_keypad_row_gpios,
-        .num_col_gpios  = 12,
+        .num_row_gpios  = ARRAY_SIZE(palmtc_keypad_row_gpios),
-        .row_gpios      = palmtc_keypad_col_gpios,
+        .col_gpios      = palmtc_keypad_col_gpios,
-        .num_row_gpios  = 4,
+        .num_col_gpios  = ARRAY_SIZE(palmtc_keypad_col_gpios),
        .active_low     = 1,
        .debounce_ms            = 20,
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index ee8d6038ce82..d98023f55503 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -15,6 +15,7 @@
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 #include <linux/delay.h>
+#include <linux/gpio_keys.h>
 #include <linux/gpio.h>
 #include <linux/leds.h>
 #include <linux/mtd/physmap.h>
@@ -375,6 +376,43 @@ static struct platform_device spitzkbd_device = {
 };
+static struct gpio_keys_button spitz_gpio_keys[] = {
+        {
+                .type   = EV_PWR,
+                .code   = KEY_SUSPEND,
+                .gpio   = SPITZ_GPIO_ON_KEY,
+                .desc   = "On/Off",
+                .wakeup = 1,
+        },
+        /* Two buttons detecting the lid state */
+        {
+                .type   = EV_SW,
+                .code   = 0,
+                .gpio   = SPITZ_GPIO_SWA,
+                .desc   = "Display Down",
+        },
+        {
+                .type   = EV_SW,
+                .code   = 1,
+                .gpio   = SPITZ_GPIO_SWB,
+                .desc   = "Lid Closed",
+        },
+};
+static struct gpio_keys_platform_data spitz_gpio_keys_platform_data = {
+        .buttons        = spitz_gpio_keys,
+        .nbuttons       = ARRAY_SIZE(spitz_gpio_keys),
+};
+static struct platform_device spitz_gpio_keys_device = {
+        .name   = "gpio-keys",
+        .id     = -1,
+        .dev    = {
+                .platform_data  = &spitz_gpio_keys_platform_data,
+        },
+};
 /*
 * Spitz LEDs
 */
@@ -689,6 +727,7 @@ static struct platform_device sharpsl_rom_device = {
 static struct platform_device *devices[] __initdata = {
        &spitzscoop_device,
        &spitzkbd_device,
+        &spitz_gpio_keys_device,
        &spitzled_device,
        &sharpsl_nand_device,
        &sharpsl_rom_device,
@@ -740,11 +779,36 @@ static void __init common_init(void)
        pxa_set_i2c_info(NULL);
 }
+#if defined(CONFIG_MACH_AKITA) || defined(CONFIG_MACH_BORZOI)
+static struct nand_bbt_descr sharpsl_akita_bbt = {
+        .options = 0,
+        .offs = 4,
+        .len = 1,
+        .pattern = scan_ff_pattern
+};
+static struct nand_ecclayout akita_oobinfo = {
+        .eccbytes = 24,
+        .eccpos = {
+                   0x5, 0x1, 0x2, 0x3, 0x6, 0x7, 0x15, 0x11,
+                   0x12, 0x13, 0x16, 0x17, 0x25, 0x21, 0x22, 0x23,
+                   0x26, 0x27, 0x35, 0x31, 0x32, 0x33, 0x36, 0x37},
+        .oobfree = {{0x08, 0x09}}
+};
+#endif
 #if defined(CONFIG_MACH_SPITZ) || defined(CONFIG_MACH_BORZOI)
 static void __init spitz_init(void)
 {
        spitz_ficp_platform_data.gpio_pwdown = SPITZ_GPIO_IR_ON;
+#ifdef CONFIG_MACH_BORZOI
+        if (machine_is_borzoi()) {
+                sharpsl_nand_platform_data.badblock_pattern = &sharpsl_akita_bbt;
+                sharpsl_nand_platform_data.ecc_layout = &akita_oobinfo;
+        }
+#endif
        platform_scoop_config = &spitz_pcmcia_config;
        common_init();
@@ -769,22 +833,6 @@ static struct i2c_board_info akita_i2c_board_info[] = {
        },
 };
-static struct nand_bbt_descr sharpsl_akita_bbt = {
-        .options = 0,
-        .offs = 4,
-        .len = 1,
-        .pattern = scan_ff_pattern
-};
-static struct nand_ecclayout akita_oobinfo = {
-        .eccbytes = 24,
-        .eccpos = {
-                   0x5, 0x1, 0x2, 0x3, 0x6, 0x7, 0x15, 0x11,
-                   0x12, 0x13, 0x16, 0x17, 0x25, 0x21, 0x22, 0x23,
-                   0x26, 0x27, 0x35, 0x31, 0x32, 0x33, 0x36, 0x37},
-        .oobfree = {{0x08, 0x09}}
-};
 static void __init akita_init(void)
 {
        spitz_ficp_platform_data.gpio_pwdown = AKITA_GPIO_IR_ON;
diff --git a/arch/arm/mach-realview/Kconfig b/arch/arm/mach-realview/Kconfig
index dfc9b0bc6eb2..c48e1f2c3349 100644
--- a/arch/arm/mach-realview/Kconfig
+++ b/arch/arm/mach-realview/Kconfig
@@ -70,6 +70,8 @@ config MACH_REALVIEW_PBX
        bool "Support RealView/PBX platform"
        select ARM_GIC
        select HAVE_PATA_PLATFORM
+        select ARCH_SPARSEMEM_ENABLE if CPU_V7 && !HIGH_PHYS_OFFSET
+        select ZONE_DMA if SPARSEMEM
        help
          Include support for the ARM(R) RealView PBX platform.
@@ -82,6 +84,7 @@ config REALVIEW_HIGH_PHYS_OFFSET
          0x70000000, 256MB of which being mirrored at 0x00000000. If
          the board supports 512MB of RAM, this option allows the
          memory to be accessed contiguously at the high physical
-          offset.
+          offset. On the PBX board, disabling this option allows 1GB of
+          RAM to be used with SPARSEMEM.
 endmenu
diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c
index a2083b60e3fb..9f293438e020 100644
--- a/arch/arm/mach-realview/core.c
+++ b/arch/arm/mach-realview/core.c
@@ -59,6 +59,25 @@
 /* used by entry-macro.S and platsmp.c */
 void __iomem *gic_cpu_base_addr;
+#ifdef CONFIG_ZONE_DMA
+/*
+ * Adjust the zones if there are restrictions for DMA access.
+ */
+void __init realview_adjust_zones(int node, unsigned long *size,
+                                  unsigned long *hole)
+{
+        unsigned long dma_size = SZ_256M >> PAGE_SHIFT;
+        if (!machine_is_realview_pbx() || node || (size[0] <= dma_size))
+                return;
+        size[ZONE_NORMAL] = size[0] - dma_size;
+        size[ZONE_DMA] = dma_size;
+        hole[ZONE_NORMAL] = hole[0];
+        hole[ZONE_DMA] = 0;
+}
+#endif
 /*
 * This is the RealView sched_clock implementation.  This has
 * a resolution of 41.7ns, and a maximum value of about 179s.
@@ -543,7 +562,7 @@ static int realview_clcd_setup(struct clcd_fb *fb)
        fb->panel               = realview_clcd_panel();
        fb->fb.screen_base = dma_alloc_writecombine(&fb->dev->dev, framesize,
-                                                    &dma, GFP_KERNEL);
+                                                    &dma, GFP_KERNEL | GFP_DMA);
        if (!fb->fb.screen_base) {
                printk(KERN_ERR "CLCD: unable to map framebuffer\n");
                return -ENOMEM;
@@ -788,3 +807,24 @@ void __init realview_timer_init(unsigned int timer_irq)
        realview_clocksource_init();
        realview_clockevents_init(timer_irq);
 }
+/*
+ * Setup the memory banks.
+ */
+void realview_fixup(struct machine_desc *mdesc, struct tag *tags, char **from,
+                    struct meminfo *meminfo)
+{
+        /*
+         * Most RealView platforms have 512MB contiguous RAM at 0x70000000.
+         * Half of this is mirrored at 0.
+         */
+#ifdef CONFIG_REALVIEW_HIGH_PHYS_OFFSET
+        meminfo->bank[0].start = 0x70000000;
+        meminfo->bank[0].size = SZ_512M;
+        meminfo->nr_banks = 1;
+#else
+        meminfo->bank[0].start = 0;
+        meminfo->bank[0].size = SZ_256M;
+        meminfo->nr_banks = 1;
+#endif
+}
diff --git a/arch/arm/mach-realview/core.h b/arch/arm/mach-realview/core.h
index 46cd6acb4d40..781bca68a9fa 100644
--- a/arch/arm/mach-realview/core.h
+++ b/arch/arm/mach-realview/core.h
@@ -25,6 +25,7 @@
 #include <linux/amba/bus.h>
 #include <linux/io.h>
+#include <asm/setup.h>
 #include <asm/leds.h>
 #define AMBA_DEVICE(name,busid,base,plat)                       \
@@ -44,6 +45,8 @@ static struct amba_device name##_device = {			\
        /* .dma         = base##_DMA,*/                         \
 }
+struct machine_desc;
 extern struct platform_device realview_flash_device;
 extern struct platform_device realview_cf_device;
 extern struct platform_device realview_i2c_device;
@@ -61,5 +64,8 @@ extern void realview_timer_init(unsigned int timer_irq);
 extern int realview_flash_register(struct resource *res, u32 num);
 extern int realview_eth_register(const char *name, struct resource *res);
 extern int realview_usb_register(struct resource *res);
+extern void realview_fixup(struct machine_desc *mdesc, struct tag *tags,
+                           char **from, struct meminfo *meminfo);
+extern void (*realview_reset)(char);
 #endif
diff --git a/arch/arm/mach-realview/include/mach/board-pb1176.h b/arch/arm/mach-realview/include/mach/board-pb1176.h
index 98f8e7eeacc2..34b80b7d40b8 100644
--- a/arch/arm/mach-realview/include/mach/board-pb1176.h
+++ b/arch/arm/mach-realview/include/mach/board-pb1176.h
@@ -73,4 +73,9 @@
 #define REALVIEW_PB1176_GIC_DIST_BASE           0x10041000 /* GIC distributor, on FPGA */
 #define REALVIEW_PB1176_L220_BASE               0x10110000 /* L220 registers */
+/*
+ * Control register SYS_RESETCTL is set to 1 to force a soft reset
+ */
+#define REALVIEW_PB1176_SYS_LOCKVAL_RSTCTL    0x0100
 #endif  /* __ASM_ARCH_BOARD_PB1176_H */
diff --git a/arch/arm/mach-realview/include/mach/board-pb11mp.h b/arch/arm/mach-realview/include/mach/board-pb11mp.h
index f0d68e0fea01..7abf918b77e9 100644
--- a/arch/arm/mach-realview/include/mach/board-pb11mp.h
+++ b/arch/arm/mach-realview/include/mach/board-pb11mp.h
@@ -81,4 +81,16 @@
 #define REALVIEW_TC11MP_GIC_DIST_BASE           0x1F001000      /* Test chip interrupt controller distributor */
 #define REALVIEW_TC11MP_L220_BASE               0x1F002000      /* L220 registers */
+ /*
+ * Values for REALVIEW_SYS_RESET_CTRL
+ */
+#define REALVIEW_PB11MP_SYS_CTRL_RESET_CONFIGCLR    0x01
+#define REALVIEW_PB11MP_SYS_CTRL_RESET_CONFIGINIT   0x02
+#define REALVIEW_PB11MP_SYS_CTRL_RESET_DLLRESET     0x03
+#define REALVIEW_PB11MP_SYS_CTRL_RESET_PLLRESET     0x04
+#define REALVIEW_PB11MP_SYS_CTRL_RESET_POR          0x05
+#define REALVIEW_PB11MP_SYS_CTRL_RESET_DoC          0x06
+#define REALVIEW_PB11MP_SYS_CTRL_LED         (1 << 0)
 #endif  /* __ASM_ARCH_BOARD_PB11MP_H */
diff --git a/arch/arm/mach-realview/include/mach/memory.h b/arch/arm/mach-realview/include/mach/memory.h
index 293c30025e7e..2417bbcf97fd 100644
--- a/arch/arm/mach-realview/include/mach/memory.h
+++ b/arch/arm/mach-realview/include/mach/memory.h
@@ -29,4 +29,53 @@
 #define PHYS_OFFSET             UL(0x00000000)
 #endif
+#if !defined(__ASSEMBLY__) && defined(CONFIG_ZONE_DMA)
+extern void realview_adjust_zones(int node, unsigned long *size,
+                                  unsigned long *hole);
+#define arch_adjust_zones(node, size, hole) \
+        realview_adjust_zones(node, size, hole)
+#define ISA_DMA_THRESHOLD       (PHYS_OFFSET + SZ_256M - 1)
+#define MAX_DMA_ADDRESS         (PAGE_OFFSET + SZ_256M)
+#endif
+#ifdef CONFIG_SPARSEMEM
+/*
+ * Sparsemem definitions for RealView PBX.
+ *
+ * The RealView PBX board has another block of 512MB of RAM at 0x20000000,
+ * however only the block at 0x70000000 (or the 256MB mirror at 0x00000000)
+ * may be used for DMA.
+ *
+ * The macros below define a section size of 256MB and a non-linear virtual to
+ * physical mapping:
+ *
+ * 256MB @ 0x00000000 -> PAGE_OFFSET
+ * 512MB @ 0x20000000 -> PAGE_OFFSET + 0x10000000
+ * 256MB @ 0x80000000 -> PAGE_OFFSET + 0x30000000
+ */
+#ifdef CONFIG_REALVIEW_HIGH_PHYS_OFFSET
+#error "SPARSEMEM not available with REALVIEW_HIGH_PHYS_OFFSET"
+#endif
+#define MAX_PHYSMEM_BITS        32
+#define SECTION_SIZE_BITS       28
+/* bank page offsets */
+#define PAGE_OFFSET1    (PAGE_OFFSET + 0x10000000)
+#define PAGE_OFFSET2    (PAGE_OFFSET + 0x30000000)
+#define __phys_to_virt(phys)                                            \
+        ((phys) >= 0x80000000 ? (phys) - 0x80000000 + PAGE_OFFSET2 :    \
+         (phys) >= 0x20000000 ? (phys) - 0x20000000 + PAGE_OFFSET1 :    \
+         (phys) + PAGE_OFFSET)
+#define __virt_to_phys(virt)                                            \
+         ((virt) >= PAGE_OFFSET2 ? (virt) - PAGE_OFFSET2 + 0x80000000 : \
+          (virt) >= PAGE_OFFSET1 ? (virt) - PAGE_OFFSET1 + 0x20000000 : \
+          (virt) - PAGE_OFFSET)
+#endif  /* CONFIG_SPARSEMEM */
 #endif
diff --git a/arch/arm/mach-realview/include/mach/platform.h b/arch/arm/mach-realview/include/mach/platform.h
index c8f50835fed2..4f46bf71e752 100644
--- a/arch/arm/mach-realview/include/mach/platform.h
+++ b/arch/arm/mach-realview/include/mach/platform.h
@@ -119,19 +119,6 @@
 #define REALVIEW_SYS_TEST_OSC3               (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC3_OFFSET)
 #define REALVIEW_SYS_TEST_OSC4               (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC4_OFFSET)
-/* 
- * Values for REALVIEW_SYS_RESET_CTRL
- */
-#define REALVIEW_SYS_CTRL_RESET_CONFIGCLR    0x01
-#define REALVIEW_SYS_CTRL_RESET_CONFIGINIT   0x02
-#define REALVIEW_SYS_CTRL_RESET_DLLRESET     0x03
-#define REALVIEW_SYS_CTRL_RESET_PLLRESET     0x04
-#define REALVIEW_SYS_CTRL_RESET_POR          0x05
-#define REALVIEW_SYS_CTRL_RESET_DoC          0x06
-#define REALVIEW_SYS_CTRL_LED         (1 << 0)
 /* ------------------------------------------------------------------------
 *  RealView control registers
 * ------------------------------------------------------------------------
@@ -153,7 +140,7 @@
 *     SYS_CLD, SYS_BOOTCS
 */
 #define REALVIEW_SYS_LOCK_LOCKED    (1 << 16)
-#define REALVIEW_SYS_LOCKVAL_MASK       0xFFFF          /* write 0xA05F to enable write access */
+#define REALVIEW_SYS_LOCKVAL_MASK       0xA05F         /* Enable write access */
 /*
 * REALVIEW_SYS_FLASH
diff --git a/arch/arm/mach-realview/include/mach/system.h b/arch/arm/mach-realview/include/mach/system.h
index 1a15a441e027..a30f2e3ec178 100644
--- a/arch/arm/mach-realview/include/mach/system.h
+++ b/arch/arm/mach-realview/include/mach/system.h
@@ -25,6 +25,8 @@
 #include <mach/hardware.h>
 #include <mach/platform.h>
+void (*realview_reset)(char mode);
 static inline void arch_idle(void)
 {
        /*
@@ -36,16 +38,12 @@ static inline void arch_idle(void)
 static inline void arch_reset(char mode, const char *cmd)
 {
-        void __iomem *hdr_ctrl = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_RESETCTL_OFFSET;
-        unsigned int val;
        /*
         * To reset, we hit the on-board reset register
         * in the system FPGA
         */
-        val = __raw_readl(hdr_ctrl);
+        if (realview_reset)
-        val |= REALVIEW_SYS_CTRL_RESET_CONFIGCLR;
+                realview_reset(mode);
-        __raw_writel(val, hdr_ctrl);
 }
 #endif
diff --git a/arch/arm/mach-realview/platsmp.c b/arch/arm/mach-realview/platsmp.c
index a88458b4799d..009265818d55 100644
--- a/arch/arm/mach-realview/platsmp.c
+++ b/arch/arm/mach-realview/platsmp.c
@@ -146,11 +146,8 @@ static void __init poke_milo(void)
         * register. The BootMonitor waits for this register to become
         * non-zero.
         */
-#define REALVIEW_SYS_FLAGSS_OFFSET 0x30
-#define REALVIEW_SYS_FLAGSC_OFFSET 0x34
        __raw_writel(BSYM(virt_to_phys(realview_secondary_startup)),
-                     __io_address(REALVIEW_SYS_BASE) +
+                     __io_address(REALVIEW_SYS_FLAGSSET));
-                     REALVIEW_SYS_FLAGSS_OFFSET);
        mb();
 }
diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c
index 1d65e64ae571..917f8ca3abff 100644
--- a/arch/arm/mach-realview/realview_eb.c
+++ b/arch/arm/mach-realview/realview_eb.c
@@ -415,6 +415,7 @@ MACHINE_START(REALVIEW_EB, "ARM-RealView EB")
        .phys_io        = REALVIEW_EB_UART0_BASE,
        .io_pg_offst    = (IO_ADDRESS(REALVIEW_EB_UART0_BASE) >> 18) & 0xfffc,
        .boot_params    = PHYS_OFFSET + 0x00000100,
+        .fixup          = realview_fixup,
        .map_io         = realview_eb_map_io,
        .init_irq       = gic_init_irq,
        .timer          = &realview_eb_timer,
diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c
index 2817fe099319..7fb726d5f8b9 100644
--- a/arch/arm/mach-realview/realview_pb1176.c
+++ b/arch/arm/mach-realview/realview_pb1176.c
@@ -290,6 +290,28 @@ static struct sys_timer realview_pb1176_timer = {
        .init           = realview_pb1176_timer_init,
 };
+static void realview_pb1176_reset(char mode)
+{
+        void __iomem *hdr_ctrl = __io_address(REALVIEW_SYS_BASE) +
+                REALVIEW_SYS_RESETCTL_OFFSET;
+        void __iomem *rst_hdr_ctrl = __io_address(REALVIEW_SYS_BASE) +
+                REALVIEW_SYS_LOCK_OFFSET;
+        __raw_writel(REALVIEW_SYS_LOCKVAL_MASK, rst_hdr_ctrl);
+        __raw_writel(REALVIEW_PB1176_SYS_LOCKVAL_RSTCTL, hdr_ctrl);
+}
+static void realview_pb1176_fixup(struct machine_desc *mdesc,
+                                  struct tag *tags, char **from,
+                                  struct meminfo *meminfo)
+{
+        /*
+         * RealView PB1176 only has 128MB of RAM mapped at 0.
+         */
+        meminfo->bank[0].start = 0;
+        meminfo->bank[0].size = SZ_128M;
+        meminfo->nr_banks = 1;
+}
 static void __init realview_pb1176_init(void)
 {
        int i;
@@ -313,6 +335,7 @@ static void __init realview_pb1176_init(void)
 #ifdef CONFIG_LEDS
        leds_event = realview_leds_event;
 #endif
+        realview_reset = realview_pb1176_reset;
 }
 MACHINE_START(REALVIEW_PB1176, "ARM-RealView PB1176")
@@ -320,6 +343,7 @@ MACHINE_START(REALVIEW_PB1176, "ARM-RealView PB1176")
        .phys_io        = REALVIEW_PB1176_UART0_BASE,
        .io_pg_offst    = (IO_ADDRESS(REALVIEW_PB1176_UART0_BASE) >> 18) & 0xfffc,
        .boot_params    = PHYS_OFFSET + 0x00000100,
+        .fixup          = realview_pb1176_fixup,
        .map_io         = realview_pb1176_map_io,
        .init_irq       = gic_init_irq,
        .timer          = &realview_pb1176_timer,
diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c
index 94680fcf726d..9bbbfc05f225 100644
--- a/arch/arm/mach-realview/realview_pb11mp.c
+++ b/arch/arm/mach-realview/realview_pb11mp.c
@@ -299,6 +299,21 @@ static struct sys_timer realview_pb11mp_timer = {
        .init           = realview_pb11mp_timer_init,
 };
+static void realview_pb11mp_reset(char mode)
+{
+        void __iomem *hdr_ctrl = __io_address(REALVIEW_SYS_BASE) +
+                REALVIEW_SYS_RESETCTL_OFFSET;
+        unsigned int val;
+        /*
+         * To reset, we hit the on-board reset register
+         * in the system FPGA
+         */
+        val = __raw_readl(hdr_ctrl);
+        val |= REALVIEW_PB11MP_SYS_CTRL_RESET_CONFIGCLR;
+        __raw_writel(val, hdr_ctrl);
+}
 static void __init realview_pb11mp_init(void)
 {
        int i;
@@ -324,6 +339,7 @@ static void __init realview_pb11mp_init(void)
 #ifdef CONFIG_LEDS
        leds_event = realview_leds_event;
 #endif
+        realview_reset = realview_pb11mp_reset;
 }
 MACHINE_START(REALVIEW_PB11MP, "ARM-RealView PB11MPCore")
@@ -331,6 +347,7 @@ MACHINE_START(REALVIEW_PB11MP, "ARM-RealView PB11MPCore")
        .phys_io        = REALVIEW_PB11MP_UART0_BASE,
        .io_pg_offst    = (IO_ADDRESS(REALVIEW_PB11MP_UART0_BASE) >> 18) & 0xfffc,
        .boot_params    = PHYS_OFFSET + 0x00000100,
+        .fixup          = realview_fixup,
        .map_io         = realview_pb11mp_map_io,
        .init_irq       = gic_init_irq,
        .timer          = &realview_pb11mp_timer,
diff --git a/arch/arm/mach-realview/realview_pba8.c b/arch/arm/mach-realview/realview_pba8.c
index 941beb2b9709..fe861e96c566 100644
--- a/arch/arm/mach-realview/realview_pba8.c
+++ b/arch/arm/mach-realview/realview_pba8.c
@@ -298,6 +298,7 @@ MACHINE_START(REALVIEW_PBA8, "ARM-RealView PB-A8")
        .phys_io        = REALVIEW_PBA8_UART0_BASE,
        .io_pg_offst    = (IO_ADDRESS(REALVIEW_PBA8_UART0_BASE) >> 18) & 0xfffc,
        .boot_params    = PHYS_OFFSET + 0x00000100,
+        .fixup          = realview_fixup,
        .map_io         = realview_pba8_map_io,
        .init_irq       = gic_init_irq,
        .timer          = &realview_pba8_timer,
diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c
index 7e4bc6cdca52..ec39488e2b42 100644
--- a/arch/arm/mach-realview/realview_pbx.c
+++ b/arch/arm/mach-realview/realview_pbx.c
@@ -304,6 +304,26 @@ static struct sys_timer realview_pbx_timer = {
        .init           = realview_pbx_timer_init,
 };
+static void realview_pbx_fixup(struct machine_desc *mdesc, struct tag *tags,
+                               char **from, struct meminfo *meminfo)
+{
+#ifdef CONFIG_SPARSEMEM
+        /*
+         * Memory configuration with SPARSEMEM enabled on RealView PBX (see
+         * asm/mach/memory.h for more information).
+         */
+        meminfo->bank[0].start = 0;
+        meminfo->bank[0].size = SZ_256M;
+        meminfo->bank[1].start = 0x20000000;
+        meminfo->bank[1].size = SZ_512M;
+        meminfo->bank[2].start = 0x80000000;
+        meminfo->bank[2].size = SZ_256M;
+        meminfo->nr_banks = 3;
+#else
+        realview_fixup(mdesc, tags, from, meminfo);
+#endif
+}
 static void __init realview_pbx_init(void)
 {
        int i;
@@ -345,6 +365,7 @@ MACHINE_START(REALVIEW_PBX, "ARM-RealView PBX")
        .phys_io        = REALVIEW_PBX_UART0_BASE,
        .io_pg_offst    = (IO_ADDRESS(REALVIEW_PBX_UART0_BASE) >> 18) & 0xfffc,
        .boot_params    = PHYS_OFFSET + 0x00000100,
+        .fixup          = realview_pbx_fixup,
        .map_io         = realview_pbx_map_io,
        .init_irq       = gic_init_irq,
        .timer          = &realview_pbx_timer,
diff --git a/arch/arm/mach-s3c2410/gpio.c b/arch/arm/mach-s3c2410/gpio.c
index 7974afca297c..9664e011dae2 100644
--- a/arch/arm/mach-s3c2410/gpio.c
+++ b/arch/arm/mach-s3c2410/gpio.c
@@ -28,6 +28,7 @@
 #include <linux/io.h>
 #include <mach/hardware.h>
+#include <mach/gpio-fns.h>
 #include <asm/irq.h>
 #include <mach/regs-gpio.h>
diff --git a/arch/arm/mach-s3c2410/include/mach/dma.h b/arch/arm/mach-s3c2410/include/mach/dma.h
index c3a2629e0ded..92e2687009ea 100644
--- a/arch/arm/mach-s3c2410/include/mach/dma.h
+++ b/arch/arm/mach-s3c2410/include/mach/dma.h
@@ -110,6 +110,8 @@ enum s3c2410_dma_loadst {
                                            * waiting for reloads */
 #define S3C2410_DMAF_AUTOSTART    (1<<1)   /* auto-start if buffer queued */
+#define S3C2410_DMAF_CIRCULAR   (1 << 2)        /* no circular dma support */
 /* dma buffer */
 struct s3c2410_dma_buf;
@@ -194,4 +196,9 @@ struct s3c2410_dma_chan {
 typedef unsigned long dma_device_t;
+static inline bool s3c_dma_has_circular(void)
+{
+        return false;
+}
 #endif /* __ASM_ARCH_DMA_H */
diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig
index d7bba919a77e..a8b69d77571b 100644
--- a/arch/arm/mach-s3c2440/Kconfig
+++ b/arch/arm/mach-s3c2440/Kconfig
@@ -103,6 +103,7 @@ config MACH_MINI2440
        select LEDS_TRIGGER_BACKLIGHT
        select SND_S3C24XX_SOC_S3C24XX_UDA134X
        select S3C_DEV_NAND
+        select S3C_DEV_USB_HOST
        help
          Say Y here to select support for the MINI2440. Is a 10cm x 10cm board
          available via various sources. It can come with a 3.5" or 7" touch LCD.
diff --git a/arch/arm/mach-s3c2440/mach-mini2440.c b/arch/arm/mach-s3c2440/mach-mini2440.c
index ec71a6965786..1c3382fefdd2 100644
--- a/arch/arm/mach-s3c2440/mach-mini2440.c
+++ b/arch/arm/mach-s3c2440/mach-mini2440.c
@@ -144,7 +144,7 @@ static struct s3c2410_udc_mach_info mini2440_udc_cfg __initdata = {
        .type           = (S3C2410_LCDCON1_TFT16BPP |\
                           S3C2410_LCDCON1_TFT)
-struct s3c2410fb_display mini2440_lcd_cfg[] __initdata = {
+static struct s3c2410fb_display mini2440_lcd_cfg[] __initdata = {
        [0] = { /* mini2440 + 3.5" TFT + touchscreen */
                _LCD_DECLARE(
                        7,                      /* The 3.5 is quite fast */
@@ -191,7 +191,7 @@ struct s3c2410fb_display mini2440_lcd_cfg[] __initdata = {
 #define S3C2410_GPCCON_MASK(x)  (3 << ((x) * 2))
 #define S3C2410_GPDCON_MASK(x)  (3 << ((x) * 2))
-struct s3c2410fb_mach_info mini2440_fb_info __initdata = {
+static struct s3c2410fb_mach_info mini2440_fb_info __initdata = {
        .displays        = &mini2440_lcd_cfg[0], /* not constant! see init */
        .num_displays    = 1,
        .default_display = 0,
diff --git a/arch/arm/mach-s3c6400/include/mach/dma.h b/arch/arm/mach-s3c6400/include/mach/dma.h
index 1067619f0ba0..6723860748be 100644
--- a/arch/arm/mach-s3c6400/include/mach/dma.h
+++ b/arch/arm/mach-s3c6400/include/mach/dma.h
@@ -58,12 +58,9 @@ enum dma_ch {
        DMACH_MAX               /* the end */
 };
-static __inline__ int s3c_dma_has_circular(void)
+static __inline__ bool s3c_dma_has_circular(void)
 {
-        /* we will be supporting ciruclar buffers as soon as we have DMA
+        return true;
-         * engine support.
-         */
-        return 1;
 }
 #define S3C2410_DMAF_CIRCULAR           (1 << 0)
diff --git a/arch/arm/mach-s3c6410/Kconfig b/arch/arm/mach-s3c6410/Kconfig
index 53fc3ff657f7..72d4b11b2077 100644
--- a/arch/arm/mach-s3c6410/Kconfig
+++ b/arch/arm/mach-s3c6410/Kconfig
@@ -77,6 +77,7 @@ config SMDK6410_WM1190_EV1
        depends on MACH_SMDK6410
        select REGULATOR
        select REGULATOR_WM8350
+        select S3C24XX_GPIO_EXTRA64
        select MFD_WM8350_I2C
        select MFD_WM8350_CONFIG_MODE_0
        select MFD_WM8350_CONFIG_MODE_3
diff --git a/arch/arm/mach-s3c6410/mach-smdk6410.c b/arch/arm/mach-s3c6410/mach-smdk6410.c
index ea51dbe76e3e..9f1a21462620 100644
--- a/arch/arm/mach-s3c6410/mach-smdk6410.c
+++ b/arch/arm/mach-s3c6410/mach-smdk6410.c
@@ -320,6 +320,9 @@ static int __init smdk6410_wm8350_init(struct wm8350 *wm8350)
 {
        int i;
+        /* Configure the IRQ line */
+        s3c_gpio_setpull(S3C64XX_GPN(12), S3C_GPIO_PULL_UP);
        /* Instantiate the regulators */
        for (i = 0; i < ARRAY_SIZE(wm1190_regulators); i++)
                wm8350_register_regulator(wm8350,
diff --git a/arch/arm/mach-u300/Makefile b/arch/arm/mach-u300/Makefile
index 885b5c027c1e..fab46fe9a71f 100644
--- a/arch/arm/mach-u300/Makefile
+++ b/arch/arm/mach-u300/Makefile
@@ -12,3 +12,4 @@ obj-$(CONFIG_MMC)                 += mmc.o
 obj-$(CONFIG_SPI_PL022)           += spi.o
 obj-$(CONFIG_MACH_U300_SPIDUMMY)  += dummyspichip.o
 obj-$(CONFIG_I2C_STU300)          += i2c.o
+obj-$(CONFIG_REGULATOR_AB3100)    += regulator.o
diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c
index be60d6deee8b..653e25be3dd8 100644
--- a/arch/arm/mach-u300/core.c
+++ b/arch/arm/mach-u300/core.c
@@ -408,7 +408,7 @@ static struct platform_device keypad_device = {
 };
 static struct platform_device rtc_device = {
-        .name = "rtc0",
+        .name = "rtc-coh901331",
        .id = -1,
        .num_resources = ARRAY_SIZE(rtc_resources),
        .resource = rtc_resources,
diff --git a/arch/arm/mach-u300/i2c.c b/arch/arm/mach-u300/i2c.c
index 10be1f888b27..c73ed06b6065 100644
--- a/arch/arm/mach-u300/i2c.c
+++ b/arch/arm/mach-u300/i2c.c
@@ -9,13 +9,257 @@
 */
 #include <linux/kernel.h>
 #include <linux/i2c.h>
+#include <linux/mfd/ab3100.h>
+#include <linux/regulator/machine.h>
+#include <linux/amba/bus.h>
 #include <mach/irqs.h>
+/*
+ * Initial settings of ab3100 registers.
+ * Common for below LDO regulator settings are that
+ * bit 7-5 controls voltage. Bit 4 turns regulator ON(1) or OFF(0).
+ * Bit 3-2 controls sleep enable and bit 1-0 controls sleep mode.
+ */
+/* LDO_A 0x16: 2.75V, ON, SLEEP_A, SLEEP OFF GND */
+#define LDO_A_SETTING           0x16
+/* LDO_C 0x10: 2.65V, ON, SLEEP_A or B, SLEEP full power */
+#define LDO_C_SETTING           0x10
+/* LDO_D 0x10: 2.65V, ON, sleep mode not used */
+#define LDO_D_SETTING           0x10
+/* LDO_E 0x10: 1.8V, ON, SLEEP_A or B, SLEEP full power */
+#define LDO_E_SETTING           0x10
+/* LDO_E SLEEP 0x00: 1.8V, not used, SLEEP_A or B, not used */
+#define LDO_E_SLEEP_SETTING     0x00
+/* LDO_F 0xD0: 2.5V, ON, SLEEP_A or B, SLEEP full power */
+#define LDO_F_SETTING           0xD0
+/* LDO_G 0x00: 2.85V, OFF, SLEEP_A or B, SLEEP full power */
+#define LDO_G_SETTING           0x00
+/* LDO_H 0x18: 2.75V, ON, SLEEP_B, SLEEP full power */
+#define LDO_H_SETTING           0x18
+/* LDO_K 0x00: 2.75V, OFF, SLEEP_A or B, SLEEP full power */
+#define LDO_K_SETTING           0x00
+/* LDO_EXT 0x00: Voltage not set, OFF, not used, not used */
+#define LDO_EXT_SETTING         0x00
+/* BUCK 0x7D: 1.2V, ON, SLEEP_A and B, SLEEP low power */
+#define BUCK_SETTING    0x7D
+/* BUCK SLEEP 0xAC: 1.05V, Not used, SLEEP_A and B, Not used */
+#define BUCK_SLEEP_SETTING      0xAC
+static struct regulator_consumer_supply supply_ldo_c[] = {
+        {
+                .dev_name = "ab3100-codec",
+                .supply = "vaudio", /* Powers the codec */
+        },
+};
+/*
+ * This one needs to be a supply so we can turn it off
+ * in order to shut down the system.
+ */
+static struct regulator_consumer_supply supply_ldo_d[] = {
+        {
+                .dev = NULL,
+                .supply = "vana15", /* Powers the SoC (CPU etc) */
+        },
+};
+static struct regulator_consumer_supply supply_ldo_g[] = {
+        {
+                .dev_name = "mmci",
+                .supply = "vmmc", /* Powers MMC/SD card */
+        },
+};
+static struct regulator_consumer_supply supply_ldo_h[] = {
+        {
+                .dev_name = "xgam_pdi",
+                .supply = "vdisp", /* Powers camera, display etc */
+        },
+};
+static struct regulator_consumer_supply supply_ldo_k[] = {
+        {
+                .dev_name = "irda",
+                .supply = "vir", /* Power IrDA */
+        },
+};
+/*
+ * This is a placeholder for whoever wish to use the
+ * external power.
+ */
+static struct regulator_consumer_supply supply_ldo_ext[] = {
+        {
+                .dev = NULL,
+                .supply = "vext", /* External power */
+        },
+};
+/* Preset (hardware defined) voltages for these regulators */
+#define LDO_A_VOLTAGE 2750000
+#define LDO_C_VOLTAGE 2650000
+#define LDO_D_VOLTAGE 2650000
+static struct ab3100_platform_data ab3100_plf_data = {
+        .reg_constraints = {
+                /* LDO A routing and constraints */
+                {
+                        .constraints = {
+                                .name = "vrad",
+                                .min_uV = LDO_A_VOLTAGE,
+                                .max_uV = LDO_A_VOLTAGE,
+                                .valid_modes_mask = REGULATOR_MODE_NORMAL,
+                                .always_on = 1,
+                                .boot_on = 1,
+                        },
+                },
+                /* LDO C routing and constraints */
+                {
+                        .constraints = {
+                                .min_uV = LDO_C_VOLTAGE,
+                                .max_uV = LDO_C_VOLTAGE,
+                                .valid_modes_mask = REGULATOR_MODE_NORMAL,
+                        },
+                        .num_consumer_supplies = ARRAY_SIZE(supply_ldo_c),
+                        .consumer_supplies = supply_ldo_c,
+                },
+                /* LDO D routing and constraints */
+                {
+                        .constraints = {
+                                .min_uV = LDO_D_VOLTAGE,
+                                .max_uV = LDO_D_VOLTAGE,
+                                .valid_modes_mask = REGULATOR_MODE_NORMAL,
+                                .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+                                /*
+                                 * Actually this is boot_on but we need
+                                 * to reference count it externally to
+                                 * be able to shut down the system.
+                                 */
+                        },
+                        .num_consumer_supplies = ARRAY_SIZE(supply_ldo_d),
+                        .consumer_supplies = supply_ldo_d,
+                },
+                /* LDO E routing and constraints */
+                {
+                        .constraints = {
+                                .name = "vio",
+                                .min_uV = 1800000,
+                                .max_uV = 1800000,
+                                .valid_modes_mask = REGULATOR_MODE_NORMAL,
+                                .valid_ops_mask =
+                                REGULATOR_CHANGE_VOLTAGE |
+                                REGULATOR_CHANGE_STATUS,
+                                .always_on = 1,
+                                .boot_on = 1,
+                        },
+                },
+                /* LDO F routing and constraints */
+                {
+                        .constraints = {
+                                .name = "vana25",
+                                .min_uV = 2500000,
+                                .max_uV = 2500000,
+                                .valid_modes_mask = REGULATOR_MODE_NORMAL,
+                                .valid_ops_mask =
+                                REGULATOR_CHANGE_VOLTAGE |
+                                REGULATOR_CHANGE_STATUS,
+                                .always_on = 1,
+                                .boot_on = 1,
+                        },
+                },
+                /* LDO G routing and constraints */
+                {
+                        .constraints = {
+                                .min_uV = 1500000,
+                                .max_uV = 2850000,
+                                .valid_modes_mask = REGULATOR_MODE_NORMAL,
+                                .valid_ops_mask =
+                                REGULATOR_CHANGE_VOLTAGE |
+                                REGULATOR_CHANGE_STATUS,
+                        },
+                        .num_consumer_supplies = ARRAY_SIZE(supply_ldo_g),
+                        .consumer_supplies = supply_ldo_g,
+                },
+                /* LDO H routing and constraints */
+                {
+                        .constraints = {
+                                .min_uV = 1200000,
+                                .max_uV = 2750000,
+                                .valid_modes_mask = REGULATOR_MODE_NORMAL,
+                                .valid_ops_mask =
+                                REGULATOR_CHANGE_VOLTAGE |
+                                REGULATOR_CHANGE_STATUS,
+                        },
+                        .num_consumer_supplies = ARRAY_SIZE(supply_ldo_h),
+                        .consumer_supplies = supply_ldo_h,
+                },
+                /* LDO K routing and constraints */
+                {
+                        .constraints = {
+                                .min_uV = 1800000,
+                                .max_uV = 2750000,
+                                .valid_modes_mask = REGULATOR_MODE_NORMAL,
+                                .valid_ops_mask =
+                                REGULATOR_CHANGE_VOLTAGE |
+                                REGULATOR_CHANGE_STATUS,
+                        },
+                        .num_consumer_supplies = ARRAY_SIZE(supply_ldo_k),
+                        .consumer_supplies = supply_ldo_k,
+                },
+                /* External regulator interface. No fixed voltage specified.
+                 * If we knew the voltage of the external regulator and it
+                 * was connected on the board, we could add the (fixed)
+                 * voltage for it here.
+                 */
+                {
+                        .constraints = {
+                                .min_uV = 0,
+                                .max_uV = 0,
+                                .valid_modes_mask = REGULATOR_MODE_NORMAL,
+                                .valid_ops_mask =
+                                REGULATOR_CHANGE_STATUS,
+                        },
+                        .num_consumer_supplies = ARRAY_SIZE(supply_ldo_ext),
+                        .consumer_supplies = supply_ldo_ext,
+                },
+                /* Buck converter routing and constraints */
+                {
+                        .constraints = {
+                                .name = "vcore",
+                                .min_uV = 1200000,
+                                .max_uV = 1800000,
+                                .valid_modes_mask = REGULATOR_MODE_NORMAL,
+                                .valid_ops_mask =
+                                REGULATOR_CHANGE_VOLTAGE |
+                                REGULATOR_CHANGE_STATUS,
+                                .always_on = 1,
+                                .boot_on = 1,
+                        },
+                },
+        },
+        .reg_initvals = {
+                LDO_A_SETTING,
+                LDO_C_SETTING,
+                LDO_E_SETTING,
+                LDO_E_SLEEP_SETTING,
+                LDO_F_SETTING,
+                LDO_G_SETTING,
+                LDO_H_SETTING,
+                LDO_K_SETTING,
+                LDO_EXT_SETTING,
+                BUCK_SETTING,
+                BUCK_SLEEP_SETTING,
+                LDO_D_SETTING,
+        },
+};
 static struct i2c_board_info __initdata bus0_i2c_board_info[] = {
        {
                .type = "ab3100",
                .addr = 0x48,
                .irq = IRQ_U300_IRQ0_EXT,
+                .platform_data = &ab3100_plf_data,
        },
 };
@@ -38,6 +282,11 @@ void __init u300_i2c_register_board_devices(void)
 {
        i2c_register_board_info(0, bus0_i2c_board_info,
                                ARRAY_SIZE(bus0_i2c_board_info));
+        /*
+         * This makes the core shut down all unused regulators
+         * after all the initcalls have completed.
+         */
+        regulator_has_full_constraints();
        i2c_register_board_info(1, bus1_i2c_board_info,
                                ARRAY_SIZE(bus1_i2c_board_info));
 }
diff --git a/arch/arm/mach-u300/mmc.c b/arch/arm/mach-u300/mmc.c
index 7b6b016786bb..109f5a6e71c7 100644
--- a/arch/arm/mach-u300/mmc.c
+++ b/arch/arm/mach-u300/mmc.c
@@ -40,64 +40,6 @@ static unsigned int mmc_status(struct device *dev)
        return mmci_card->mmc_inserted;
 }
-/*
- * Here follows a large chunk of code which will only be enabled if you
- * have both the AB3100 chip mounted and the MMC subsystem activated.
- */
-static u32 mmc_translate_vdd(struct device *dev, unsigned int voltage)
-{
-        int v;
-        /*
-         * MMC Spec:
-         * bit 7:       1.70 - 1.95V
-         * bit 8 - 14:  2.0 - 2.6V
-         * bit 15 - 23: 2.7 - 3.6V
-         *
-         * ab3100 voltages:
-         * 000 - 2.85V
-         * 001 - 2.75V
-         * 010 - 1.8V
-         * 011 - 1.5V
-         */
-        switch (voltage) {
-        case 8:
-                v = 3;
-                break;
-        case 9:
-        case 10:
-        case 11:
-        case 12:
-        case 13:
-        case 14:
-        case 15:
-                v = 1;
-                break;
-        case 16:
-                v = 1;
-                break;
-        case 17:
-        case 18:
-        case 19:
-        case 20:
-        case 21:
-        case 22:
-        case 23:
-        case 24:
-                v = 0;
-                break;
-        default:
-                v = 0;
-                break;
-        }
-        /* PL180 voltage register bits */
-        return v << 2;
-}
 static int mmci_callback(void *data)
 {
        struct mmci_card_event *mmci_card = data;
@@ -154,9 +96,11 @@ int __devinit mmc_init(struct amba_device *adev)
        if (!mmci_card)
                return -ENOMEM;
+        /*
+         * Do not set ocr_mask or voltage translation function,
+         * we have a regulator we can control instead.
+         */
        /* Nominally 2.85V on our platform */
-        mmci_card->mmc0_plat_data.ocr_mask = MMC_VDD_28_29;
-        mmci_card->mmc0_plat_data.translate_vdd = mmc_translate_vdd;
        mmci_card->mmc0_plat_data.status = mmc_status;
        mmci_card->mmc0_plat_data.gpio_wp = -1;
        mmci_card->mmc0_plat_data.gpio_cd = -1;
diff --git a/arch/arm/mach-u300/regulator.c b/arch/arm/mach-u300/regulator.c
new file mode 100644
index 000000000000..9c53f01c62eb
--- /dev/null
+++ b/arch/arm/mach-u300/regulator.c
@@ -0,0 +1,88 @@
+/*
+ * arch/arm/mach-u300/regulator.c
+ *
+ * Copyright (C) 2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * Handle board-bound regulators and board power not related
+ * to any devices.
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+#include <linux/device.h>
+#include <linux/signal.h>
+#include <linux/err.h>
+#include <linux/regulator/consumer.h>
+/* Those are just for writing in syscon */
+#include <linux/io.h>
+#include <mach/hardware.h>
+#include <mach/syscon.h>
+/*
+ * Regulators that power the board and chip and which are
+ * not copuled to specific drivers are hogged in these
+ * instances.
+ */
+static struct regulator *main_power_15;
+/*
+ * This function is used from pm.h to shut down the system by
+ * resetting all regulators in turn and then disable regulator
+ * LDO D (main power).
+ */
+void u300_pm_poweroff(void)
+{
+        sigset_t old, all;
+        sigfillset(&all);
+        if (!sigprocmask(SIG_BLOCK, &all, &old)) {
+                /* Disable LDO D to shut down the system */
+                if (main_power_15)
+                        regulator_disable(main_power_15);
+                else
+                        pr_err("regulator not available to shut down system\n");
+                (void) sigprocmask(SIG_SETMASK, &old, NULL);
+        }
+        return;
+}
+/*
+ * Hog the regulators needed to power up the board.
+ */
+static int __init u300_init_boardpower(void)
+{
+        int err;
+        u32 val;
+        pr_info("U300: setting up board power\n");
+        main_power_15 = regulator_get(NULL, "vana15");
+        if (IS_ERR(main_power_15)) {
+                pr_err("could not get vana15");
+                return PTR_ERR(main_power_15);
+        }
+        err = regulator_enable(main_power_15);
+        if (err) {
+                pr_err("could not enable vana15\n");
+                return err;
+        }
+        /*
+         * On U300 a special system controller register pulls up the DC
+         * until the vana15 (LDO D) regulator comes up. At this point, all
+         * regulators are set and we do not need power control via
+         * DC ON anymore. This function will likely be moved whenever
+         * the rest of the U300 power management is implemented.
+         */
+        pr_info("U300: disable system controller pull-up\n");
+        val = readw(U300_SYSCON_VBASE + U300_SYSCON_PMCR);
+        val &= ~U300_SYSCON_PMCR_DCON_ENABLE;
+        writew(val, U300_SYSCON_VBASE + U300_SYSCON_PMCR);
+        /* Register globally exported PM poweroff hook */
+        pm_power_off = u300_pm_poweroff;
+        return 0;
+}
+/*
+ * So at module init time we hog the regulator!
+ */
+module_init(u300_init_boardpower);
diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig
new file mode 100644
index 000000000000..03625d744857
--- /dev/null
+++ b/arch/arm/mach-ux500/Kconfig
@@ -0,0 +1,15 @@
+menu "ST-Ericsson platform type"
+        depends on ARCH_U8500
+comment "ST-Ericsson Multicore Mobile Platforms"
+config MACH_U8500_MOP
+        bool "U8500 Early Development platform"
+        default y
+        select ARM_GIC
+        select HAS_MTU
+        help
+          Include support for mop500 development platform
+          based on U8500 architecture. The platform is based
+          on early drop silicon version of 8500.
+endmenu
diff --git a/arch/arm/mach-ux500/Makefile b/arch/arm/mach-ux500/Makefile
new file mode 100644
index 000000000000..95e6e24c0042
--- /dev/null
+++ b/arch/arm/mach-ux500/Makefile
@@ -0,0 +1,8 @@
+#
+# Makefile for the linux kernel, U8500 machine.
+#
+obj-y                           := clock.o
+obj-$(CONFIG_ARCH_U8500)        += cpu-u8500.o
+obj-$(CONFIG_MACH_U8500_MOP)    += board-mop500.o
+obj-$(CONFIG_SMP)               += platsmp.o headsmp.o localtimer.o
diff --git a/arch/arm/mach-ux500/Makefile.boot b/arch/arm/mach-ux500/Makefile.boot
new file mode 100644
index 000000000000..c7e75acfe6c9
--- /dev/null
+++ b/arch/arm/mach-ux500/Makefile.boot
@@ -0,0 +1,4 @@
+   zreladdr-y   := 0x00008000
+params_phys-y   := 0x00000100
+initrd_phys-y   := 0x00800000
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
new file mode 100644
index 000000000000..aa5afbcc90f9
--- /dev/null
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -0,0 +1,158 @@
+/*
+ * Copyright (C) 2008-2009 ST-Ericsson
+ *
+ * Author: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2, as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/pl022.h>
+#include <linux/spi/spi.h>
+#include <asm/localtimer.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <plat/mtu.h>
+#include <mach/hardware.h>
+#include <mach/setup.h>
+#define __MEM_4K_RESOURCE(x) \
+        .res = {.start = (x), .end = (x) + SZ_4K - 1, .flags = IORESOURCE_MEM}
+/* These are active devices on this board */
+static struct amba_device uart0_device = {
+        .dev = { .init_name = "uart0" },
+        __MEM_4K_RESOURCE(U8500_UART0_BASE),
+        .irq = {IRQ_UART0, NO_IRQ},
+};
+static struct amba_device uart1_device = {
+        .dev = { .init_name = "uart1" },
+        __MEM_4K_RESOURCE(U8500_UART1_BASE),
+        .irq = {IRQ_UART1, NO_IRQ},
+};
+static struct amba_device uart2_device = {
+        .dev = { .init_name = "uart2" },
+        __MEM_4K_RESOURCE(U8500_UART2_BASE),
+        .irq = {IRQ_UART2, NO_IRQ},
+};
+static void ab4500_spi_cs_control(u32 command)
+{
+        /* set the FRM signal, which is CS  - TODO */
+}
+struct pl022_config_chip ab4500_chip_info = {
+        .lbm = LOOPBACK_DISABLED,
+        .com_mode = INTERRUPT_TRANSFER,
+        .iface = SSP_INTERFACE_MOTOROLA_SPI,
+        /* we can act as master only */
+        .hierarchy = SSP_MASTER,
+        .slave_tx_disable = 0,
+        .endian_rx = SSP_RX_MSB,
+        .endian_tx = SSP_TX_MSB,
+        .data_size = SSP_DATA_BITS_24,
+        .rx_lev_trig = SSP_RX_1_OR_MORE_ELEM,
+        .tx_lev_trig = SSP_TX_1_OR_MORE_EMPTY_LOC,
+        .clk_phase = SSP_CLK_SECOND_EDGE,
+        .clk_pol = SSP_CLK_POL_IDLE_HIGH,
+        .cs_control = ab4500_spi_cs_control,
+};
+static struct spi_board_info u8500_spi_devices[] = {
+        {
+                .modalias = "ab4500",
+                .controller_data = &ab4500_chip_info,
+                .max_speed_hz = 12000000,
+                .bus_num = 0,
+                .chip_select = 0,
+                .mode = SPI_MODE_0,
+                .irq = IRQ_AB4500,
+        },
+};
+static struct pl022_ssp_controller ssp0_platform_data = {
+        .bus_id = 0,
+        /* pl022 not yet supports dma */
+        .enable_dma = 0,
+        /* on this platform, gpio 31,142,144,214 &
+         * 224 are connected as chip selects
+         */
+        .num_chipselect = 5,
+};
+static struct amba_device pl022_device = {
+        .dev = {
+                .coherent_dma_mask = ~0,
+                .init_name = "pl022",
+                .platform_data = &ssp0_platform_data,
+        },
+        .res = {
+                .start = U8500_SSP0_BASE,
+                .end   = U8500_SSP0_BASE + SZ_4K - 1,
+                .flags = IORESOURCE_MEM,
+        },
+        .irq = {IRQ_SSP0, NO_IRQ },
+        /* ST-Ericsson modified id */
+        .periphid = SSP_PER_ID,
+};
+static struct amba_device *amba_devs[] __initdata = {
+        &uart0_device,
+        &uart1_device,
+        &uart2_device,
+        &pl022_device,
+};
+static void __init u8500_timer_init(void)
+{
+#ifdef CONFIG_LOCAL_TIMERS
+        /* Setup the local timer base */
+        twd_base = __io_address(U8500_TWD_BASE);
+#endif
+        /* Setup the MTU base */
+        mtu_base = __io_address(U8500_MTU0_BASE);
+        nmdk_timer_init();
+}
+static struct sys_timer u8500_timer = {
+        .init   = u8500_timer_init,
+};
+static void __init u8500_init_machine(void)
+{
+        int i;
+        /* Register the active AMBA devices on this board */
+        for (i = 0; i < ARRAY_SIZE(amba_devs); i++)
+                amba_device_register(amba_devs[i], &iomem_resource);
+        spi_register_board_info(u8500_spi_devices,
+                        ARRAY_SIZE(u8500_spi_devices));
+        u8500_init_devices();
+}
+MACHINE_START(U8500, "ST-Ericsson MOP500 platform")
+        /* Maintainer: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> */
+        .phys_io        = U8500_UART2_BASE,
+        .io_pg_offst    = (IO_ADDRESS(U8500_UART2_BASE) >> 18) & 0xfffc,
+        .boot_params    = 0x100,
+        .map_io         = u8500_map_io,
+        .init_irq       = u8500_init_irq,
+        /* we re-use nomadik timer here */
+        .timer          = &u8500_timer,
+        .init_machine   = u8500_init_machine,
+MACHINE_END
diff --git a/arch/arm/mach-ux500/clock.c b/arch/arm/mach-ux500/clock.c
new file mode 100644
index 000000000000..20b6ebb6783a
--- /dev/null
+++ b/arch/arm/mach-ux500/clock.c
@@ -0,0 +1,95 @@
+/*
+ *  Copyright (C) 2009 ST-Ericsson
+ *      heavily based on realview platform
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/mutex.h>
+#include <asm/clkdev.h>
+/* currently the clk structure
+ * just supports rate. This would
+ * be extended as and when new devices are
+ * added - TODO
+ */
+struct clk {
+        unsigned long           rate;
+};
+int clk_enable(struct clk *clk)
+{
+        return 0;
+}
+EXPORT_SYMBOL(clk_enable);
+void clk_disable(struct clk *clk)
+{
+}
+EXPORT_SYMBOL(clk_disable);
+unsigned long clk_get_rate(struct clk *clk)
+{
+        return clk->rate;
+}
+EXPORT_SYMBOL(clk_get_rate);
+long clk_round_rate(struct clk *clk, unsigned long rate)
+{
+        /*TODO*/
+        return rate;
+}
+EXPORT_SYMBOL(clk_round_rate);
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+        clk->rate = rate;
+        return 0;
+}
+EXPORT_SYMBOL(clk_set_rate);
+/* ssp clock */
+static struct clk ssp_clk = {
+        .rate = 48000000,
+};
+/* fixed clock */
+static struct clk f38_clk = {
+        .rate = 38400000,
+};
+static struct clk_lookup lookups[] = {
+        {
+                /* UART0 */
+                .dev_id         = "uart0",
+                .clk            = &f38_clk,
+        }, {    /* UART1 */
+                .dev_id         = "uart1",
+                .clk            = &f38_clk,
+        }, {    /* UART2 */
+                .dev_id         = "uart2",
+                .clk            = &f38_clk,
+        }, {    /* SSP */
+                .dev_id         = "pl022",
+                .clk            = &ssp_clk,
+        }
+};
+static int __init clk_init(void)
+{
+        int i;
+        /* register the clock lookups */
+        for (i = 0; i < ARRAY_SIZE(lookups); i++)
+                clkdev_add(&lookups[i]);
+        return 0;
+}
+arch_initcall(clk_init);
diff --git a/arch/arm/mach-ux500/cpu-u8500.c b/arch/arm/mach-ux500/cpu-u8500.c
new file mode 100644
index 000000000000..5f05e5850f71
--- /dev/null
+++ b/arch/arm/mach-ux500/cpu-u8500.c
@@ -0,0 +1,64 @@
+/*
+ * Copyright (C) 2008-2009 ST-Ericsson
+ *
+ * Author: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2, as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/amba/bus.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <asm/hardware/gic.h>
+#include <asm/mach/map.h>
+#include <mach/hardware.h>
+/* add any platform devices here - TODO */
+static struct platform_device *platform_devs[] __initdata = {
+        /* yet to be added, add i2c0, gpio.. */
+};
+#define __IO_DEV_DESC(x, sz)    {               \
+        .virtual        = IO_ADDRESS(x),        \
+        .pfn            = __phys_to_pfn(x),     \
+        .length         = sz,                   \
+        .type           = MT_DEVICE,            \
+}
+/* minimum static i/o mapping required to boot U8500 platforms */
+static struct map_desc u8500_io_desc[] __initdata = {
+        __IO_DEV_DESC(U8500_GIC_CPU_BASE, SZ_4K),
+        __IO_DEV_DESC(U8500_GIC_DIST_BASE, SZ_4K),
+        __IO_DEV_DESC(U8500_MTU0_BASE, SZ_4K),
+        __IO_DEV_DESC(U8500_TWD_BASE, SZ_4K),
+        __IO_DEV_DESC(U8500_SCU_BASE, SZ_4K),
+        __IO_DEV_DESC(U8500_BACKUPRAM0_BASE, SZ_8K),
+};
+void __init u8500_map_io(void)
+{
+        iotable_init(u8500_io_desc, ARRAY_SIZE(u8500_io_desc));
+}
+void __init u8500_init_irq(void)
+{
+        gic_dist_init(0, __io_address(U8500_GIC_DIST_BASE), 29);
+        gic_cpu_init(0, __io_address(U8500_GIC_CPU_BASE));
+}
+/*
+ * This function is called from the board init
+ */
+void __init u8500_init_devices(void)
+{
+        /* Register the platform devices */
+        platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs));
+        return ;
+}
diff --git a/arch/arm/mach-ux500/headsmp.S b/arch/arm/mach-ux500/headsmp.S
new file mode 100644
index 000000000000..a6be2cdf2b2f
--- /dev/null
+++ b/arch/arm/mach-ux500/headsmp.S
@@ -0,0 +1,38 @@
+/*
+ *  Copyright (c) 2009 ST-Ericsson
+ *      This file is based  ARM Realview platform
+ *  Copyright (c) 2003 ARM Limited
+ *  All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/linkage.h>
+#include <linux/init.h>
+        __INIT
+/*
+ * U8500 specific entry point for secondary CPUs.
+ */
+ENTRY(u8500_secondary_startup)
+        mrc     p15, 0, r0, c0, c0, 5
+        and     r0, r0, #15
+        adr     r4, 1f
+        ldmia   r4, {r5, r6}
+        sub     r4, r4, r5
+        add     r6, r6, r4
+        dsb
+pen:    ldr     r7, [r6]
+        cmp     r7, r0
+        bne     pen
+        /*
+         * we've been released from the holding pen: secondary_stack
+         * should now contain the SVC stack for this core
+         */
+        b       secondary_startup
+1:      .long   .
+        .long   pen_release
diff --git a/arch/arm/mach-ux500/include/mach/clkdev.h b/arch/arm/mach-ux500/include/mach/clkdev.h
new file mode 100644
index 000000000000..04b37a89801c
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/clkdev.h
@@ -0,0 +1,7 @@
+#ifndef __ASM_MACH_CLKDEV_H
+#define __ASM_MACH_CLKDEV_H
+#define __clk_get(clk) ({ 1; })
+#define __clk_put(clk) do { } while (0)
+#endif
diff --git a/arch/arm/mach-ux500/include/mach/debug-macro.S b/arch/arm/mach-ux500/include/mach/debug-macro.S
new file mode 100644
index 000000000000..8f21b6a95dce
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/debug-macro.S
@@ -0,0 +1,19 @@
+/*
+ * Debugging macro include header
+ *
+ *  Copyright (C) 2009 ST-Ericsson
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+        .macro  addruart,rx
+        mrc     p15, 0, \rx, c1, c0
+        tst     \rx, #1                 @MMU enabled?
+        moveq   \rx, #0x80000000        @MMU off, Physical address
+        movne   \rx, #0xF0000000        @MMU on, Virtual address
+        orr     \rx, \rx, #0x7000
+        .endm
+#include <asm/hardware/debug-pl01x.S>
diff --git a/arch/arm/mach-ux500/include/mach/entry-macro.S b/arch/arm/mach-ux500/include/mach/entry-macro.S
new file mode 100644
index 000000000000..eece3301fef7
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/entry-macro.S
@@ -0,0 +1,89 @@
+/*
+ * Low-level IRQ helper macros for U8500 platforms
+ *
+ * Copyright (C) 2009 ST-Ericsson.
+ *
+ * This file is a copy of ARM Realview platform.
+ *      -just satisfied checkpatch script.
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <mach/hardware.h>
+#include <asm/hardware/gic.h>
+                .macro  disable_fiq
+                .endm
+                .macro  get_irqnr_preamble, base, tmp
+                ldr     \base, =IO_ADDRESS(U8500_GIC_CPU_BASE)
+                .endm
+                .macro  arch_ret_to_user, tmp1, tmp2
+                .endm
+                /*
+                 * The interrupt numbering scheme is defined in the
+                 * interrupt controller spec.  To wit:
+                 *
+                 * Interrupts 0-15 are IPI
+                 * 16-28 are reserved
+                 * 29-31 are local.  We allow 30 to be used for the watchdog.
+                 * 32-1020 are global
+                 * 1021-1022 are reserved
+                 * 1023 is "spurious" (no interrupt)
+                 *
+                 * For now, we ignore all local interrupts so only return an
+                 * interrupt if it's between 30 and 1020. The test_for_ipi
+                 * routine below will pick up on IPIs.
+                 *
+                 * A simple read from the controller will tell us the number
+                 * of the highest priority enabled interrupt. We then just
+                 * need to check whether it is in the valid range for an
+                 * IRQ (30-1020 inclusive).
+                 */
+                .macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
+                /* bits 12-10 = src CPU, 9-0 = int # */
+                ldr     \irqstat, [\base, #GIC_CPU_INTACK]
+                ldr     \tmp, =1021
+                bic     \irqnr, \irqstat, #0x1c00
+                cmp     \irqnr, #29
+                cmpcc   \irqnr, \irqnr
+                cmpne   \irqnr, \tmp
+                cmpcs   \irqnr, \irqnr
+                .endm
+                /* We assume that irqstat (the raw value of the IRQ
+                 * acknowledge register) is preserved from the macro above.
+                 * If there is an IPI, we immediately signal end of
+                 * interrupt on the controller, since this requires the
+                 * original irqstat value which we won't easily be able
+                 * to recreate later.
+                 */
+                .macro test_for_ipi, irqnr, irqstat, base, tmp
+                bic     \irqnr, \irqstat, #0x1c00
+                cmp     \irqnr, #16
+                strcc   \irqstat, [\base, #GIC_CPU_EOI]
+                cmpcs   \irqnr, \irqnr
+                .endm
+                /* As above, this assumes that irqstat and base
+                 * are preserved..
+                 */
+                .macro test_for_ltirq, irqnr, irqstat, base, tmp
+                bic     \irqnr, \irqstat, #0x1c00
+                mov     \tmp, #0
+                cmp     \irqnr, #29
+                moveq   \tmp, #1
+                streq   \irqstat, [\base, #GIC_CPU_EOI]
+                cmp     \tmp, #0
+                .endm
diff --git a/arch/arm/mach-ux500/include/mach/hardware.h b/arch/arm/mach-ux500/include/mach/hardware.h
new file mode 100644
index 000000000000..6da650202dc7
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/hardware.h
@@ -0,0 +1,131 @@
+/*
+ * Copyright (C) 2009 ST-Ericsson.
+ *
+ * U8500 hardware definitions
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#ifndef __MACH_HARDWARE_H
+#define __MACH_HARDWARE_H
+/* macros to get at IO space when running virtually
+ * We dont map all the peripherals, let ioremap do
+ * this for us. We map only very basic peripherals here.
+ */
+#define U8500_IO_VIRTUAL        0xf0000000
+#define U8500_IO_PHYSICAL       0xa0000000
+/* this macro is used in assembly, so no cast */
+#define IO_ADDRESS(x)           \
+        (((x) & 0x0fffffff) + (((x) >> 4) & 0x0f000000) + U8500_IO_VIRTUAL)
+/* typesafe io address */
+#define __io_address(n)         __io(IO_ADDRESS(n))
+/*
+ * Base address definitions for U8500 Onchip IPs. All the
+ * peripherals are contained in a single 1 Mbyte region, with
+ * AHB peripherals at the bottom and APB peripherals at the
+ * top of the region. PER stands for PERIPHERAL region which
+ * itself divided into sub regions.
+ */
+#define U8500_PER3_BASE         0x80000000
+#define U8500_PER2_BASE         0x80110000
+#define U8500_PER1_BASE         0x80120000
+#define U8500_PER4_BASE         0x80150000
+#define U8500_PER6_BASE         0xa03c0000
+#define U8500_PER5_BASE         0xa03e0000
+#define U8500_PER7_BASE         0xa03d0000
+#define U8500_SVA_BASE          0xa0100000
+#define U8500_SIA_BASE          0xa0200000
+#define U8500_SGA_BASE          0xa0300000
+#define U8500_MCDE_BASE         0xa0350000
+#define U8500_DMA_BASE          0xa0362000
+#define U8500_SCU_BASE          0xa0410000
+#define U8500_GIC_CPU_BASE      0xa0410100
+#define U8500_TWD_BASE          0xa0410600
+#define U8500_GIC_DIST_BASE     0xa0411000
+#define U8500_L2CC_BASE         0xa0412000
+#define U8500_TWD_SIZE          0x100
+/* per7 base addressess */
+#define U8500_CR_BASE           (U8500_PER7_BASE + 0x8000)
+#define U8500_MTU0_BASE         (U8500_PER7_BASE + 0xa000)
+#define U8500_MTU1_BASE         (U8500_PER7_BASE + 0xb000)
+#define U8500_TZPC0_BASE        (U8500_PER7_BASE + 0xc000)
+#define U8500_CLKRST7_BASE      (U8500_PER7_BASE + 0xf000)
+/* per6 base addressess */
+#define U8500_RNG_BASE          (U8500_PER6_BASE + 0x0000)
+#define U8500_PKA_BASE          (U8500_PER6_BASE + 0x1000)
+#define U8500_PKAM_BASE         (U8500_PER6_BASE + 0x2000)
+#define U8500_CRYPTO0_BASE      (U8500_PER6_BASE + 0xa000)
+#define U8500_CRYPTO1_BASE      (U8500_PER6_BASE + 0xb000)
+#define U8500_CLKRST6_BASE      (U8500_PER7_BASE + 0xf000)
+/* per5 base addressess */
+#define U8500_USBOTG_BASE       (U8500_PER5_BASE + 0x00000)
+#define U8500_GPIO5_BASE        (U8500_PER5_BASE + 0x1e000)
+#define U8500_CLKRST5_BASE      (U8500_PER7_BASE + 0x1f000)
+/* per4 base addressess */
+#define U8500_BACKUPRAM0_BASE   (U8500_PER4_BASE + 0x0000)
+#define U8500_BACKUPRAM1_BASE   (U8500_PER4_BASE + 0x1000)
+#define U8500_RTT0_BASE         (U8500_PER4_BASE + 0x2000)
+#define U8500_RTT1_BASE         (U8500_PER4_BASE + 0x3000)
+#define U8500_RTC_BASE          (U8500_PER4_BASE + 0x4000)
+#define U8500_SCR_BASE          (U8500_PER4_BASE + 0x5000)
+#define U8500_DMC_BASE          (U8500_PER4_BASE + 0x6000)
+#define U8500_PRCMU_BASE        (U8500_PER4_BASE + 0x7000)
+/* per3 base addressess */
+#define U8500_FSMC_BASE         (U8500_PER3_BASE + 0x0000)
+#define U8500_SSP0_BASE         (U8500_PER3_BASE + 0x2000)
+#define U8500_SSP1_BASE         (U8500_PER3_BASE + 0x3000)
+#define U8500_I2C0_BASE         (U8500_PER3_BASE + 0x4000)
+#define U8500_SDI2_BASE         (U8500_PER3_BASE + 0x5000)
+#define U8500_SKE_BASE          (U8500_PER3_BASE + 0x6000)
+#define U8500_UART2_BASE        (U8500_PER3_BASE + 0x7000)
+#define U8500_SDI5_BASE         (U8500_PER3_BASE + 0x8000)
+#define U8500_GPIO3_BASE        (U8500_PER3_BASE + 0xe000)
+#define U8500_CLKRST3_BASE      (U8500_PER7_BASE + 0xf000)
+/* per2 base addressess */
+#define U8500_I2C3_BASE         (U8500_PER2_BASE + 0x0000)
+#define U8500_SPI2_BASE         (U8500_PER2_BASE + 0x1000)
+#define U8500_SPI1_BASE         (U8500_PER2_BASE + 0x2000)
+#define U8500_PWL_BASE          (U8500_PER2_BASE + 0x3000)
+#define U8500_SDI4_BASE         (U8500_PER2_BASE + 0x4000)
+#define U8500_MSP2_BASE         (U8500_PER2_BASE + 0x7000)
+#define U8500_SDI1_BASE         (U8500_PER2_BASE + 0x8000)
+#define U8500_SDI3_BASE         (U8500_PER2_BASE + 0x9000)
+#define U8500_SPI0_BASE         (U8500_PER2_BASE + 0xa000)
+#define U8500_HSIR_BASE         (U8500_PER2_BASE + 0xb000)
+#define U8500_HSIT_BASE         (U8500_PER2_BASE + 0xc000)
+#define U8500_GPIO2_BASE        (U8500_PER2_BASE + 0xe000)
+#define U8500_CLKRST2_BASE      (U8500_PER2_BASE + 0xf000)
+/* per1 base addresses */
+#define U8500_UART0_BASE        (U8500_PER1_BASE + 0x0000)
+#define U8500_UART1_BASE        (U8500_PER1_BASE + 0x1000)
+#define U8500_I2C1_BASE         (U8500_PER1_BASE + 0x2000)
+#define U8500_MSP0_BASE         (U8500_PER1_BASE + 0x3000)
+#define U8500_MSP1_BASE         (U8500_PER1_BASE + 0x4000)
+#define U8500_SDI0_BASE         (U8500_PER1_BASE + 0x6000)
+#define U8500_I2C2_BASE         (U8500_PER1_BASE + 0x8000)
+#define U8500_SPI3_BASE         (U8500_PER1_BASE + 0x9000)
+#define U8500_SLIM0_BASE        (U8500_PER1_BASE + 0xa000)
+#define U8500_GPIO1_BASE        (U8500_PER1_BASE + 0xe000)
+#define U8500_CLKRST1_BASE      (U8500_PER2_BASE + 0xf000)
+/* ST-Ericsson modified pl022 id */
+#define SSP_PER_ID              0x01080022
+#endif                          /* __MACH_HARDWARE_H */
diff --git a/arch/arm/mach-ux500/include/mach/io.h b/arch/arm/mach-ux500/include/mach/io.h
new file mode 100644
index 000000000000..1cf3f44ce5b2
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/io.h
@@ -0,0 +1,22 @@
+/*
+ * arch/arm/mach-u8500/include/mach/io.h
+ *
+ * Copyright (C) 1997-1999 Russell King
+ *
+ * Modifications:
+ *  06-12-1997  RMK     Created.
+ *  07-04-1999  RMK     Major cleanup
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+#define IO_SPACE_LIMIT 0xffffffff
+/*
+ * We don't actually have real ISA nor PCI buses, but there is so many
+ * drivers out there that might just work if we fake them...
+ */
+#define __io(a)         __typesafe_io(a)
+#define __mem_pci(a)    (a)
+#endif
diff --git a/arch/arm/mach-ux500/include/mach/irqs.h b/arch/arm/mach-ux500/include/mach/irqs.h
new file mode 100644
index 000000000000..394b5dd2200f
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/irqs.h
@@ -0,0 +1,71 @@
+/*
+ *  Copyright (C) 2008 STMicroelectronics
+ *  Copyright (C) 2009 ST-Ericsson.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#ifndef ASM_ARCH_IRQS_H
+#define ASM_ARCH_IRQS_H
+#include <mach/hardware.h>
+#define IRQ_LOCALTIMER                  29
+#define IRQ_LOCALWDOG                   30
+/* Shared Peripheral Interrupt (SHPI) */
+#define IRQ_SHPI_START                  32
+/* Interrupt numbers generic for shared peripheral */
+#define IRQ_MTU0                (IRQ_SHPI_START + 4)
+#define IRQ_SPI2                (IRQ_SHPI_START + 6)
+#define IRQ_SPI0                (IRQ_SHPI_START + 8)
+#define IRQ_UART0               (IRQ_SHPI_START + 11)
+#define IRQ_I2C3                (IRQ_SHPI_START + 12)
+#define IRQ_SSP0                (IRQ_SHPI_START + 14)
+#define IRQ_MTU1                (IRQ_SHPI_START + 17)
+#define IRQ_RTC_RTT             (IRQ_SHPI_START + 18)
+#define IRQ_UART1               (IRQ_SHPI_START + 19)
+#define IRQ_I2C0                (IRQ_SHPI_START + 21)
+#define IRQ_I2C1                (IRQ_SHPI_START + 22)
+#define IRQ_USBOTG              (IRQ_SHPI_START + 23)
+#define IRQ_DMA                 (IRQ_SHPI_START + 25)
+#define IRQ_UART2               (IRQ_SHPI_START + 26)
+#define IRQ_HSIR_EXCEP          (IRQ_SHPI_START + 29)
+#define IRQ_MSP0                (IRQ_SHPI_START + 31)
+#define IRQ_HSIR_CH0_OVRRUN     (IRQ_SHPI_START + 32)
+#define IRQ_HSIR_CH1_OVRRUN     (IRQ_SHPI_START + 33)
+#define IRQ_HSIR_CH2_OVRRUN     (IRQ_SHPI_START + 34)
+#define IRQ_HSIR_CH3_OVRRUN     (IRQ_SHPI_START + 35)
+#define IRQ_AB4500              (IRQ_SHPI_START + 40)
+#define IRQ_DISP                (IRQ_SHPI_START + 48)
+#define IRQ_SiPI3               (IRQ_SHPI_START + 49)
+#define IRQ_SSP1                (IRQ_SHPI_START + 52)
+#define IRQ_I2C2                (IRQ_SHPI_START + 55)
+#define IRQ_SDMMC0              (IRQ_SHPI_START + 60)
+#define IRQ_MSP1                (IRQ_SHPI_START + 62)
+#define IRQ_SPI1                (IRQ_SHPI_START + 96)
+#define IRQ_MSP2                (IRQ_SHPI_START + 98)
+#define IRQ_SDMMC4              (IRQ_SHPI_START + 99)
+#define IRQ_HSIRD0              (IRQ_SHPI_START + 104)
+#define IRQ_HSIRD1              (IRQ_SHPI_START + 105)
+#define IRQ_HSITD0              (IRQ_SHPI_START + 106)
+#define IRQ_HSITD1              (IRQ_SHPI_START + 107)
+#define IRQ_GPIO0               (IRQ_SHPI_START + 119)
+#define IRQ_GPIO1               (IRQ_SHPI_START + 120)
+#define IRQ_GPIO2               (IRQ_SHPI_START + 121)
+#define IRQ_GPIO3               (IRQ_SHPI_START + 122)
+#define IRQ_GPIO4               (IRQ_SHPI_START + 123)
+#define IRQ_GPIO5               (IRQ_SHPI_START + 124)
+#define IRQ_GPIO6               (IRQ_SHPI_START + 125)
+#define IRQ_GPIO7               (IRQ_SHPI_START + 126)
+#define IRQ_GPIO8               (IRQ_SHPI_START + 127)
+/* There are 128 shared peripheral interrupts assigned to
+ * INTID[160:32]. The first 32 interrupts are reserved.
+ */
+#define NR_IRQS                 161
+#endif /*ASM_ARCH_IRQS_H*/
diff --git a/arch/arm/mach-ux500/include/mach/memory.h b/arch/arm/mach-ux500/include/mach/memory.h
new file mode 100644
index 000000000000..510571a59e25
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/memory.h
@@ -0,0 +1,18 @@
+/*
+ * Copyright (C) 2009 ST-Ericsson
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET     UL(0x00000000)
+#define BUS_OFFSET      UL(0x00000000)
+#endif
diff --git a/arch/arm/mach-ux500/include/mach/setup.h b/arch/arm/mach-ux500/include/mach/setup.h
new file mode 100644
index 000000000000..cf0ce1687f24
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/setup.h
@@ -0,0 +1,23 @@
+/*
+ * Copyright (C) 2009 ST-Ericsson.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * These symbols are needed for board-specific files to call their
+ * own cpu-specific files
+ */
+#ifndef __ASM_ARCH_SETUP_H
+#define __ASM_ARCH_SETUP_H
+#include <asm/mach/time.h>
+#include <linux/init.h>
+extern void u8500_map_io(void);
+extern void u8500_init_devices(void);
+extern void u8500_init_irq(void);
+/* We re-use nomadik_timer for this platform */
+extern void nmdk_timer_init(void);
+#endif /*  __ASM_ARCH_SETUP_H */
diff --git a/arch/arm/mach-ux500/include/mach/smp.h b/arch/arm/mach-ux500/include/mach/smp.h
new file mode 100644
index 000000000000..b59f7bc9725d
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/smp.h
@@ -0,0 +1,32 @@
+/*
+ * This file is based ARM realview platform.
+ * Copyright (C) ARM Limited.
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#ifndef ASMARM_ARCH_SMP_H
+#define ASMARM_ARCH_SMP_H
+#include <asm/hardware/gic.h>
+/* This is required to wakeup the secondary core */
+extern void u8500_secondary_startup(void);
+#define hard_smp_processor_id()                         \
+        ({                                              \
+                unsigned int cpunum;                    \
+                __asm__("mrc p15, 0, %0, c0, c0, 5"     \
+                        : "=r" (cpunum));               \
+                cpunum &= 0x0F;                         \
+        })
+/*
+ * We use IRQ1 as the IPI
+ */
+static inline void smp_cross_call(const struct cpumask *mask)
+{
+        gic_raise_softirq(mask, 1);
+}
+#endif
diff --git a/arch/arm/mach-ux500/include/mach/system.h b/arch/arm/mach-ux500/include/mach/system.h
new file mode 100644
index 000000000000..c0cd8006f1a2
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/system.h
@@ -0,0 +1,25 @@
+/*
+ * Copyright (C) 2009 ST-Ericsson.
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+static inline void arch_idle(void)
+{
+        /*
+         * This should do all the clock switching
+         * and wait for interrupt tricks
+         */
+        cpu_do_idle();
+}
+static inline void arch_reset(char mode, const char *cmd)
+{
+        /* yet to be implemented - TODO */
+}
+#endif
diff --git a/arch/arm/mach-ux500/include/mach/timex.h b/arch/arm/mach-ux500/include/mach/timex.h
new file mode 100644
index 000000000000..d0942c174018
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/timex.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_ARCH_TIMEX_H
+#define __ASM_ARCH_TIMEX_H
+#define CLOCK_TICK_RATE         110000000
+#endif
diff --git a/arch/arm/mach-ux500/include/mach/uncompress.h b/arch/arm/mach-ux500/include/mach/uncompress.h
new file mode 100644
index 000000000000..8552eb188b50
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/uncompress.h
@@ -0,0 +1,58 @@
+/*
+ *  Copyright (C) 2009 ST-Ericsson
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_UNCOMPRESS_H
+#define __ASM_ARCH_UNCOMPRESS_H
+#include <asm/setup.h>
+#include <linux/io.h>
+#include <mach/hardware.h>
+#define U8500_UART_DR           0x80007000
+#define U8500_UART_LCRH         0x8000702c
+#define U8500_UART_CR           0x80007030
+#define U8500_UART_FR           0x80007018
+static void putc(const char c)
+{
+        /* Do nothing if the UART is not enabled. */
+        if (!(readb(U8500_UART_CR) & 0x1))
+                return;
+        if (c == '\n')
+                putc('\r');
+        while (readb(U8500_UART_FR) & (1 << 5))
+                barrier();
+        writeb(c, U8500_UART_DR);
+}
+static void flush(void)
+{
+        if (!(readb(U8500_UART_CR) & 0x1))
+                return;
+        while (readb(U8500_UART_FR) & (1 << 3))
+                barrier();
+}
+static inline void arch_decomp_setup(void)
+{
+}
+#define arch_decomp_wdog() /* nothing to do here */
+#endif /* __ASM_ARCH_UNCOMPRESS_H */
diff --git a/arch/arm/mach-ux500/include/mach/vmalloc.h b/arch/arm/mach-ux500/include/mach/vmalloc.h
new file mode 100644
index 000000000000..86cdbbce1842
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/vmalloc.h
@@ -0,0 +1,18 @@
+/*
+ *  Copyright (C) 2009 ST-Ericsson
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#define VMALLOC_END     0xf0000000
diff --git a/arch/arm/mach-ux500/localtimer.c b/arch/arm/mach-ux500/localtimer.c
new file mode 100644
index 000000000000..2288f6a7c518
--- /dev/null
+++ b/arch/arm/mach-ux500/localtimer.c
@@ -0,0 +1,28 @@
+/*
+ * Copyright (C) 2008-2009 ST-Ericsson
+ * Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
+ *
+ * This file is heavily based on relaview platform, almost a copy.
+ *
+ * Copyright (C) 2002 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/clockchips.h>
+#include <asm/irq.h>
+#include <asm/smp_twd.h>
+#include <asm/localtimer.h>
+/*
+ * Setup the local clock events for a CPU.
+ */
+void __cpuinit local_timer_setup(struct clock_event_device *evt)
+{
+        evt->irq = IRQ_LOCALTIMER;
+        twd_timer_setup(evt);
+}
diff --git a/arch/arm/mach-ux500/platsmp.c b/arch/arm/mach-ux500/platsmp.c
new file mode 100644
index 000000000000..8dfe7ca245d8
--- /dev/null
+++ b/arch/arm/mach-ux500/platsmp.c
@@ -0,0 +1,177 @@
+/*
+ * Copyright (C) 2002 ARM Ltd.
+ * Copyright (C) 2008 STMicroelctronics.
+ * Copyright (C) 2009 ST-Ericsson.
+ * Author: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
+ *
+ * This file is based on arm realview platform
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/smp.h>
+#include <linux/io.h>
+#include <asm/cacheflush.h>
+#include <asm/localtimer.h>
+#include <asm/smp_scu.h>
+#include <mach/hardware.h>
+/*
+ * control for which core is the next to come out of the secondary
+ * boot "holding pen"
+ */
+volatile int __cpuinitdata pen_release = -1;
+static unsigned int __init get_core_count(void)
+{
+        return scu_get_core_count(__io_address(U8500_SCU_BASE));
+}
+static DEFINE_SPINLOCK(boot_lock);
+void __cpuinit platform_secondary_init(unsigned int cpu)
+{
+        trace_hardirqs_off();
+        /*
+         * if any interrupts are already enabled for the primary
+         * core (e.g. timer irq), then they will not have been enabled
+         * for us: do so
+         */
+        gic_cpu_init(0, __io_address(U8500_GIC_CPU_BASE));
+        /*
+         * let the primary processor know we're out of the
+         * pen, then head off into the C entry point
+         */
+        pen_release = -1;
+        /*
+         * Synchronise with the boot thread.
+         */
+        spin_lock(&boot_lock);
+        spin_unlock(&boot_lock);
+}
+int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+        unsigned long timeout;
+        /*
+         * set synchronisation state between this boot processor
+         * and the secondary one
+         */
+        spin_lock(&boot_lock);
+        /*
+         * The secondary processor is waiting to be released from
+         * the holding pen - release it, then wait for it to flag
+         * that it has been released by resetting pen_release.
+         */
+        pen_release = cpu;
+        flush_cache_all();
+        timeout = jiffies + (1 * HZ);
+        while (time_before(jiffies, timeout)) {
+                if (pen_release == -1)
+                        break;
+        }
+        /*
+         * now the secondary core is starting up let it run its
+         * calibrations, then wait for it to finish
+         */
+        spin_unlock(&boot_lock);
+        return pen_release != -1 ? -ENOSYS : 0;
+}
+static void __init wakeup_secondary(void)
+{
+        /* nobody is to be released from the pen yet */
+        pen_release = -1;
+        /*
+         * write the address of secondary startup into the backup ram register
+         * at offset 0x1FF4, then write the magic number 0xA1FEED01 to the
+         * backup ram register at offset 0x1FF0, which is what boot rom code
+         * is waiting for. This would wake up the secondary core from WFE
+         */
+#define U8500_CPU1_JUMPADDR_OFFSET 0x1FF4
+        __raw_writel(virt_to_phys(u8500_secondary_startup),
+                (void __iomem *)IO_ADDRESS(U8500_BACKUPRAM0_BASE) +
+                U8500_CPU1_JUMPADDR_OFFSET);
+#define U8500_CPU1_WAKEMAGIC_OFFSET 0x1FF0
+        __raw_writel(0xA1FEED01,
+                (void __iomem *)IO_ADDRESS(U8500_BACKUPRAM0_BASE) +
+                U8500_CPU1_WAKEMAGIC_OFFSET);
+        /* make sure write buffer is drained */
+        mb();
+}
+/*
+ * Initialise the CPU possible map early - this describes the CPUs
+ * which may be present or become present in the system.
+ */
+void __init smp_init_cpus(void)
+{
+        unsigned int i, ncores = get_core_count();
+        for (i = 0; i < ncores; i++)
+                set_cpu_possible(i, true);
+}
+void __init smp_prepare_cpus(unsigned int max_cpus)
+{
+        unsigned int ncores = get_core_count();
+        unsigned int cpu = smp_processor_id();
+        int i;
+        /* sanity check */
+        if (ncores == 0) {
+                printk(KERN_ERR
+                       "U8500: strange CM count of 0? Default to 1\n");
+                ncores = 1;
+        }
+        if (ncores > num_possible_cpus())       {
+                printk(KERN_WARNING
+                       "U8500: no. of cores (%d) greater than configured "
+                       "maximum of %d - clipping\n",
+                       ncores, num_possible_cpus());
+                ncores = num_possible_cpus();
+        }
+        smp_store_cpu_info(cpu);
+        /*
+         * are we trying to boot more cores than exist?
+         */
+        if (max_cpus > ncores)
+                max_cpus = ncores;
+        /*
+         * Initialise the present map, which describes the set of CPUs
+         * actually populated at the present time.
+         */
+        for (i = 0; i < max_cpus; i++)
+                set_cpu_present(i, true);
+        if (max_cpus > 1) {
+                /*
+                 * Enable the local timer or broadcast device for the
+                 * boot CPU, but only if we have more than one CPU.
+                 */
+                percpu_timer_setup();
+                scu_enable(__io_address(U8500_SCU_BASE));
+                wakeup_secondary();
+        }
+}
diff --git a/arch/arm/mach-w90x900/dev.c b/arch/arm/mach-w90x900/dev.c
index 2a6f98de48d2..51f17b753348 100644
--- a/arch/arm/mach-w90x900/dev.c
+++ b/arch/arm/mach-w90x900/dev.c
@@ -32,6 +32,7 @@
 #include <asm/mach-types.h>
 #include <mach/regs-serial.h>
+#include <mach/nuc900_spi.h>
 #include <mach/map.h>
 #include "cpu.h"
@@ -196,6 +197,18 @@ static struct platform_device nuc900_device_emc = {
 /* SPI device */
+static struct w90p910_spi_info nuc900_spiflash_data = {
+        .num_cs         = 1,
+        .lsb            = 0,
+        .txneg          = 1,
+        .rxneg          = 0,
+        .divider        = 24,
+        .sleep          = 0,
+        .txnum          = 0,
+        .txbitlen       = 1,
+        .bus_num        = 0,
+};
 static struct resource nuc900_spi_resource[] = {
        [0] = {
                .start = W90X900_PA_I2C + SPIOFFSET,
@@ -214,6 +227,9 @@ static struct platform_device nuc900_device_spi = {
        .id             = -1,
        .num_resources  = ARRAY_SIZE(nuc900_spi_resource),
        .resource       = nuc900_spi_resource,
+        .dev            = {
+                                .platform_data = &nuc900_spiflash_data,
+                        }
 };
 /* spi device, spi flash info */
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index e993140edd88..7b7d4c36c11c 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -122,10 +122,7 @@ config CPU_ARM920T
        select CPU_TLB_V4WBI if MMU
        help
          The ARM920T is licensed to be produced by numerous vendors,
-          and is used in the Maverick EP9312 and the Samsung S3C2410.
+          and is used in the Cirrus EP93xx and the Samsung S3C2410.
-          More information on the Maverick EP9312 at
-          <http://linuxdevices.com/products/PD2382866068.html>.
          Say Y if you want support for the ARM920T processor.
          Otherwise, say N.
@@ -777,5 +774,5 @@ config CACHE_XSC3L2
 config ARM_L1_CACHE_SHIFT
        int
-        default 6 if ARCH_OMAP3
+        default 6 if ARCH_OMAP3 || ARCH_S5PC1XX
        default 5
diff --git a/arch/arm/mm/Makefile b/arch/arm/mm/Makefile
index 055cb2aa8134..42352e75742b 100644
--- a/arch/arm/mm/Makefile
+++ b/arch/arm/mm/Makefile
@@ -6,7 +6,7 @@ obj-y				:= dma-mapping.o extable.o fault.o init.o \
                                   iomap.o
 obj-$(CONFIG_MMU)               += fault-armv.o flush.o ioremap.o mmap.o \
-                                   pgd.o mmu.o
+                                   pgd.o mmu.o vmregion.o
 ifneq ($(CONFIG_MMU),y)
 obj-y                           += nommu.o
diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c
index b480f1d3591f..747f9a9021bb 100644
--- a/arch/arm/mm/cache-l2x0.c
+++ b/arch/arm/mm/cache-l2x0.c
@@ -99,18 +99,25 @@ void __init l2x0_init(void __iomem *base, __u32 aux_val, __u32 aux_mask)
        l2x0_base = base;
-        /* disable L2X0 */
+        /*
-        writel(0, l2x0_base + L2X0_CTRL);
+         * Check if l2x0 controller is already enabled.
+         * If you are booting from non-secure mode
+         * accessing the below registers will fault.
+         */
+        if (!(readl(l2x0_base + L2X0_CTRL) & 1)) {
-        aux = readl(l2x0_base + L2X0_AUX_CTRL);
+                /* l2x0 controller is disabled */
-        aux &= aux_mask;
-        aux |= aux_val;
-        writel(aux, l2x0_base + L2X0_AUX_CTRL);
-        l2x0_inv_all();
+                aux = readl(l2x0_base + L2X0_AUX_CTRL);
+                aux &= aux_mask;
+                aux |= aux_val;
+                writel(aux, l2x0_base + L2X0_AUX_CTRL);
-        /* enable L2X0 */
+                l2x0_inv_all();
-        writel(1, l2x0_base + L2X0_CTRL);
+                /* enable L2X0 */
+                writel(1, l2x0_base + L2X0_CTRL);
+        }
        outer_cache.inv_range = l2x0_inv_range;
        outer_cache.clean_range = l2x0_clean_range;
diff --git a/arch/arm/mm/context.c b/arch/arm/mm/context.c
index 6bda76a43199..a9e22e31eaa1 100644
--- a/arch/arm/mm/context.c
+++ b/arch/arm/mm/context.c
@@ -50,10 +50,7 @@ void __new_context(struct mm_struct *mm)
                isb();
                flush_tlb_all();
                if (icache_is_vivt_asid_tagged()) {
-                        asm("mcr        p15, 0, %0, c7, c5, 0   @ invalidate I-cache\n"
+                        __flush_icache_all();
-                            "mcr        p15, 0, %0, c7, c5, 6   @ flush BTAC/BTB\n"
-                            :
-                            : "r" (0));
                        dsb();
                }
        }
diff --git a/arch/arm/mm/copypage-v6.c b/arch/arm/mm/copypage-v6.c
index 4127a7bddfe5..841f355319bf 100644
--- a/arch/arm/mm/copypage-v6.c
+++ b/arch/arm/mm/copypage-v6.c
@@ -41,6 +41,14 @@ static void v6_copy_user_highpage_nonaliasing(struct page *to,
        kfrom = kmap_atomic(from, KM_USER0);
        kto = kmap_atomic(to, KM_USER1);
        copy_page(kto, kfrom);
+#ifdef CONFIG_HIGHMEM
+        /*
+         * kmap_atomic() doesn't set the page virtual address, and
+         * kunmap_atomic() takes care of cache flushing already.
+         */
+        if (page_address(to) != NULL)
+#endif
+                __cpuc_flush_dcache_page(kto);
        kunmap_atomic(kto, KM_USER1);
        kunmap_atomic(kfrom, KM_USER0);
 }
diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c
index b30925fcbcdc..26325cb5d368 100644
--- a/arch/arm/mm/dma-mapping.c
+++ b/arch/arm/mm/dma-mapping.c
@@ -63,194 +63,152 @@ static u64 get_coherent_dma_mask(struct device *dev)
        return mask;
 }
-#ifdef CONFIG_MMU
 /*
- * These are the page tables (2MB each) covering uncached, DMA consistent allocations
+ * Allocate a DMA buffer for 'dev' of size 'size' using the
+ * specified gfp mask.  Note that 'size' must be page aligned.
 */
-static pte_t *consistent_pte[NUM_CONSISTENT_PTES];
+static struct page *__dma_alloc_buffer(struct device *dev, size_t size, gfp_t gfp)
-static DEFINE_SPINLOCK(consistent_lock);
+{
+        unsigned long order = get_order(size);
+        struct page *page, *p, *e;
+        void *ptr;
+        u64 mask = get_coherent_dma_mask(dev);
-/*
+#ifdef CONFIG_DMA_API_DEBUG
- * VM region handling support.
+        u64 limit = (mask + 1) & ~mask;
- *
+        if (limit && size >= limit) {
- * This should become something generic, handling VM region allocations for
+                dev_warn(dev, "coherent allocation too big (requested %#x mask %#llx)\n",
- * vmalloc and similar (ioremap, module space, etc).
+                        size, mask);
- *
+                return NULL;
- * I envisage vmalloc()'s supporting vm_struct becoming:
+        }
- *
+#endif
- *  struct vm_struct {
- *    struct vm_region  region;
- *    unsigned long     flags;
- *    struct page       **pages;
- *    unsigned int      nr_pages;
- *    unsigned long     phys_addr;
- *  };
- *
- * get_vm_area() would then call vm_region_alloc with an appropriate
- * struct vm_region head (eg):
- *
- *  struct vm_region vmalloc_head = {
- *      .vm_list        = LIST_HEAD_INIT(vmalloc_head.vm_list),
- *      .vm_start       = VMALLOC_START,
- *      .vm_end         = VMALLOC_END,
- *  };
- *
- * However, vmalloc_head.vm_start is variable (typically, it is dependent on
- * the amount of RAM found at boot time.)  I would imagine that get_vm_area()
- * would have to initialise this each time prior to calling vm_region_alloc().
- */
-struct arm_vm_region {
-        struct list_head        vm_list;
-        unsigned long           vm_start;
-        unsigned long           vm_end;
-        struct page             *vm_pages;
-        int                     vm_active;
-};
-static struct arm_vm_region consistent_head = {
+        if (!mask)
-        .vm_list        = LIST_HEAD_INIT(consistent_head.vm_list),
+                return NULL;
-        .vm_start       = CONSISTENT_BASE,
-        .vm_end         = CONSISTENT_END,
-};
-static struct arm_vm_region *
+        if (mask < 0xffffffffULL)
-arm_vm_region_alloc(struct arm_vm_region *head, size_t size, gfp_t gfp)
+                gfp |= GFP_DMA;
-{
-        unsigned long addr = head->vm_start, end = head->vm_end - size;
+        page = alloc_pages(gfp, order);
-        unsigned long flags;
+        if (!page)
-        struct arm_vm_region *c, *new;
+                return NULL;
-        new = kmalloc(sizeof(struct arm_vm_region), gfp);
-        if (!new)
-                goto out;
-        spin_lock_irqsave(&consistent_lock, flags);
-        list_for_each_entry(c, &head->vm_list, vm_list) {
-                if ((addr + size) < addr)
-                        goto nospc;
-                if ((addr + size) <= c->vm_start)
-                        goto found;
-                addr = c->vm_end;
-                if (addr > end)
-                        goto nospc;
-        }
- found:
        /*
-         * Insert this entry _before_ the one we found.
+         * Now split the huge page and free the excess pages
         */
-        list_add_tail(&new->vm_list, &c->vm_list);
+        split_page(page, order);
-        new->vm_start = addr;
+        for (p = page + (size >> PAGE_SHIFT), e = page + (1 << order); p < e; p++)
-        new->vm_end = addr + size;
+                __free_page(p);
-        new->vm_active = 1;
+        /*
-        spin_unlock_irqrestore(&consistent_lock, flags);
+         * Ensure that the allocated pages are zeroed, and that any data
-        return new;
+         * lurking in the kernel direct-mapped region is invalidated.
+         */
- nospc:
+        ptr = page_address(page);
-        spin_unlock_irqrestore(&consistent_lock, flags);
+        memset(ptr, 0, size);
-        kfree(new);
+        dmac_flush_range(ptr, ptr + size);
- out:
+        outer_flush_range(__pa(ptr), __pa(ptr) + size);
-        return NULL;
+        return page;
 }
-static struct arm_vm_region *arm_vm_region_find(struct arm_vm_region *head, unsigned long addr)
+/*
+ * Free a DMA buffer.  'size' must be page aligned.
+ */
+static void __dma_free_buffer(struct page *page, size_t size)
 {
-        struct arm_vm_region *c;
+        struct page *e = page + (size >> PAGE_SHIFT);
-        
-        list_for_each_entry(c, &head->vm_list, vm_list) {
+        while (page < e) {
-                if (c->vm_active && c->vm_start == addr)
+                __free_page(page);
-                        goto out;
+                page++;
        }
-        c = NULL;
- out:
-        return c;
 }
+#ifdef CONFIG_MMU
+/*
+ * These are the page tables (2MB each) covering uncached, DMA consistent allocations
+ */
+static pte_t *consistent_pte[NUM_CONSISTENT_PTES];
+#include "vmregion.h"
+static struct arm_vmregion_head consistent_head = {
+        .vm_lock        = __SPIN_LOCK_UNLOCKED(&consistent_head.vm_lock),
+        .vm_list        = LIST_HEAD_INIT(consistent_head.vm_list),
+        .vm_start       = CONSISTENT_BASE,
+        .vm_end         = CONSISTENT_END,
+};
 #ifdef CONFIG_HUGETLB_PAGE
 #error ARM Coherent DMA allocator does not (yet) support huge TLB
 #endif
-static void *
+/*
-__dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp,
+ * Initialise the consistent memory allocation.
-            pgprot_t prot)
+ */
+static int __init consistent_init(void)
 {
-        struct page *page;
+        int ret = 0;
-        struct arm_vm_region *c;
+        pgd_t *pgd;
-        unsigned long order;
+        pmd_t *pmd;
-        u64 mask = get_coherent_dma_mask(dev);
+        pte_t *pte;
-        u64 limit;
+        int i = 0;
+        u32 base = CONSISTENT_BASE;
-        if (!consistent_pte[0]) {
+        do {
-                printk(KERN_ERR "%s: not initialised\n", __func__);
+                pgd = pgd_offset(&init_mm, base);
-                dump_stack();
+                pmd = pmd_alloc(&init_mm, pgd, base);
-                return NULL;
+                if (!pmd) {
-        }
+                        printk(KERN_ERR "%s: no pmd tables\n", __func__);
+                        ret = -ENOMEM;
+                        break;
+                }
+                WARN_ON(!pmd_none(*pmd));
-        if (!mask)
+                pte = pte_alloc_kernel(pmd, base);
-                goto no_page;
+                if (!pte) {
+                        printk(KERN_ERR "%s: no pte tables\n", __func__);
+                        ret = -ENOMEM;
+                        break;
+                }
-        /*
+                consistent_pte[i++] = pte;
-         * Sanity check the allocation size.
+                base += (1 << PGDIR_SHIFT);
-         */
+        } while (base < CONSISTENT_END);
-        size = PAGE_ALIGN(size);
-        limit = (mask + 1) & ~mask;
-        if ((limit && size >= limit) ||
-            size >= (CONSISTENT_END - CONSISTENT_BASE)) {
-                printk(KERN_WARNING "coherent allocation too big "
-                       "(requested %#x mask %#llx)\n", size, mask);
-                goto no_page;
-        }
-        order = get_order(size);
+        return ret;
+}
-        if (mask != 0xffffffff)
+core_initcall(consistent_init);
-                gfp |= GFP_DMA;
-        page = alloc_pages(gfp, order);
+static void *
-        if (!page)
+__dma_alloc_remap(struct page *page, size_t size, gfp_t gfp, pgprot_t prot)
-                goto no_page;
+{
+        struct arm_vmregion *c;
-        /*
+        if (!consistent_pte[0]) {
-         * Invalidate any data that might be lurking in the
+                printk(KERN_ERR "%s: not initialised\n", __func__);
-         * kernel direct-mapped region for device DMA.
+                dump_stack();
-         */
+                return NULL;
-        {
-                void *ptr = page_address(page);
-                memset(ptr, 0, size);
-                dmac_flush_range(ptr, ptr + size);
-                outer_flush_range(__pa(ptr), __pa(ptr) + size);
        }
        /*
         * Allocate a virtual address in the consistent mapping region.
         */
-        c = arm_vm_region_alloc(&consistent_head, size,
+        c = arm_vmregion_alloc(&consistent_head, size,
                            gfp & ~(__GFP_DMA | __GFP_HIGHMEM));
        if (c) {
                pte_t *pte;
-                struct page *end = page + (1 << order);
                int idx = CONSISTENT_PTE_INDEX(c->vm_start);
                u32 off = CONSISTENT_OFFSET(c->vm_start) & (PTRS_PER_PTE-1);
                pte = consistent_pte[idx] + off;
                c->vm_pages = page;
-                split_page(page, order);
-                /*
-                 * Set the "dma handle"
-                 */
-                *handle = page_to_dma(dev, page);
                do {
                        BUG_ON(!pte_none(*pte));
-                        /*
-                         * x86 does not mark the pages reserved...
-                         */
-                        SetPageReserved(page);
                        set_pte_ext(pte, mk_pte(page, prot), 0);
                        page++;
                        pte++;
@@ -261,48 +219,90 @@ __dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp,
                        }
                } while (size -= PAGE_SIZE);
-                /*
-                 * Free the otherwise unused pages.
-                 */
-                while (page < end) {
-                        __free_page(page);
-                        page++;
-                }
                return (void *)c->vm_start;
        }
-        if (page)
-                __free_pages(page, order);
- no_page:
-        *handle = ~0;
        return NULL;
 }
+static void __dma_free_remap(void *cpu_addr, size_t size)
+{
+        struct arm_vmregion *c;
+        unsigned long addr;
+        pte_t *ptep;
+        int idx;
+        u32 off;
+        c = arm_vmregion_find_remove(&consistent_head, (unsigned long)cpu_addr);
+        if (!c) {
+                printk(KERN_ERR "%s: trying to free invalid coherent area: %p\n",
+                       __func__, cpu_addr);
+                dump_stack();
+                return;
+        }
+        if ((c->vm_end - c->vm_start) != size) {
+                printk(KERN_ERR "%s: freeing wrong coherent size (%ld != %d)\n",
+                       __func__, c->vm_end - c->vm_start, size);
+                dump_stack();
+                size = c->vm_end - c->vm_start;
+        }
+        idx = CONSISTENT_PTE_INDEX(c->vm_start);
+        off = CONSISTENT_OFFSET(c->vm_start) & (PTRS_PER_PTE-1);
+        ptep = consistent_pte[idx] + off;
+        addr = c->vm_start;
+        do {
+                pte_t pte = ptep_get_and_clear(&init_mm, addr, ptep);
+                ptep++;
+                addr += PAGE_SIZE;
+                off++;
+                if (off >= PTRS_PER_PTE) {
+                        off = 0;
+                        ptep = consistent_pte[++idx];
+                }
+                if (pte_none(pte) || !pte_present(pte))
+                        printk(KERN_CRIT "%s: bad page in kernel page table\n",
+                               __func__);
+        } while (size -= PAGE_SIZE);
+        flush_tlb_kernel_range(c->vm_start, c->vm_end);
+        arm_vmregion_free(&consistent_head, c);
+}
 #else   /* !CONFIG_MMU */
+#define __dma_alloc_remap(page, size, gfp, prot)        page_address(page)
+#define __dma_free_remap(addr, size)                    do { } while (0)
+#endif  /* CONFIG_MMU */
 static void *
 __dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp,
            pgprot_t prot)
 {
-        void *virt;
+        struct page *page;
-        u64 mask = get_coherent_dma_mask(dev);
+        void *addr;
-        if (!mask)
+        *handle = ~0;
-                goto error;
+        size = PAGE_ALIGN(size);
-        if (mask != 0xffffffff)
+        page = __dma_alloc_buffer(dev, size, gfp);
-                gfp |= GFP_DMA;
+        if (!page)
-        virt = kmalloc(size, gfp);
+                return NULL;
-        if (!virt)
-                goto error;
-        *handle =  virt_to_dma(dev, virt);
+        if (!arch_is_coherent())
-        return virt;
+                addr = __dma_alloc_remap(page, size, gfp, prot);
+        else
+                addr = page_address(page);
-error:
+        if (addr)
-        *handle = ~0;
+                *handle = page_to_dma(dev, page);
-        return NULL;
+        return addr;
 }
-#endif  /* CONFIG_MMU */
 /*
 * Allocate DMA-coherent memory space and return both the kernel remapped
@@ -316,19 +316,8 @@ dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gf
        if (dma_alloc_from_coherent(dev, size, handle, &memory))
                return memory;
-        if (arch_is_coherent()) {
-                void *virt;
-                virt = kmalloc(size, gfp);
-                if (!virt)
-                        return NULL;
-                *handle =  virt_to_dma(dev, virt);
-                return virt;
-        }
        return __dma_alloc(dev, size, handle, gfp,
-                           pgprot_noncached(pgprot_kernel));
+                           pgprot_dmacoherent(pgprot_kernel));
 }
 EXPORT_SYMBOL(dma_alloc_coherent);
@@ -349,15 +338,12 @@ static int dma_mmap(struct device *dev, struct vm_area_struct *vma,
 {
        int ret = -ENXIO;
 #ifdef CONFIG_MMU
-        unsigned long flags, user_size, kern_size;
+        unsigned long user_size, kern_size;
-        struct arm_vm_region *c;
+        struct arm_vmregion *c;
        user_size = (vma->vm_end - vma->vm_start) >> PAGE_SHIFT;
-        spin_lock_irqsave(&consistent_lock, flags);
+        c = arm_vmregion_find(&consistent_head, (unsigned long)cpu_addr);
-        c = arm_vm_region_find(&consistent_head, (unsigned long)cpu_addr);
-        spin_unlock_irqrestore(&consistent_lock, flags);
        if (c) {
                unsigned long off = vma->vm_pgoff;
@@ -379,7 +365,7 @@ static int dma_mmap(struct device *dev, struct vm_area_struct *vma,
 int dma_mmap_coherent(struct device *dev, struct vm_area_struct *vma,
                      void *cpu_addr, dma_addr_t dma_addr, size_t size)
 {
-        vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
+        vma->vm_page_prot = pgprot_dmacoherent(vma->vm_page_prot);
        return dma_mmap(dev, vma, cpu_addr, dma_addr, size);
 }
 EXPORT_SYMBOL(dma_mmap_coherent);
@@ -396,144 +382,23 @@ EXPORT_SYMBOL(dma_mmap_writecombine);
 * free a page as defined by the above mapping.
 * Must not be called with IRQs disabled.
 */
-#ifdef CONFIG_MMU
 void dma_free_coherent(struct device *dev, size_t size, void *cpu_addr, dma_addr_t handle)
 {
-        struct arm_vm_region *c;
-        unsigned long flags, addr;
-        pte_t *ptep;
-        int idx;
-        u32 off;
        WARN_ON(irqs_disabled());
        if (dma_release_from_coherent(dev, get_order(size), cpu_addr))
                return;
-        if (arch_is_coherent()) {
-                kfree(cpu_addr);
-                return;
-        }
        size = PAGE_ALIGN(size);
-        spin_lock_irqsave(&consistent_lock, flags);
+        if (!arch_is_coherent())
-        c = arm_vm_region_find(&consistent_head, (unsigned long)cpu_addr);
+                __dma_free_remap(cpu_addr, size);
-        if (!c)
-                goto no_area;
-        c->vm_active = 0;
-        spin_unlock_irqrestore(&consistent_lock, flags);
-        if ((c->vm_end - c->vm_start) != size) {
-                printk(KERN_ERR "%s: freeing wrong coherent size (%ld != %d)\n",
-                       __func__, c->vm_end - c->vm_start, size);
-                dump_stack();
-                size = c->vm_end - c->vm_start;
-        }
-        idx = CONSISTENT_PTE_INDEX(c->vm_start);
-        off = CONSISTENT_OFFSET(c->vm_start) & (PTRS_PER_PTE-1);
-        ptep = consistent_pte[idx] + off;
-        addr = c->vm_start;
-        do {
-                pte_t pte = ptep_get_and_clear(&init_mm, addr, ptep);
-                unsigned long pfn;
-                ptep++;
-                addr += PAGE_SIZE;
-                off++;
-                if (off >= PTRS_PER_PTE) {
-                        off = 0;
-                        ptep = consistent_pte[++idx];
-                }
-                if (!pte_none(pte) && pte_present(pte)) {
-                        pfn = pte_pfn(pte);
-                        if (pfn_valid(pfn)) {
-                                struct page *page = pfn_to_page(pfn);
-                                /*
-                                 * x86 does not mark the pages reserved...
-                                 */
-                                ClearPageReserved(page);
-                                __free_page(page);
-                                continue;
-                        }
-                }
-                printk(KERN_CRIT "%s: bad page in kernel page table\n",
-                       __func__);
-        } while (size -= PAGE_SIZE);
-        flush_tlb_kernel_range(c->vm_start, c->vm_end);
-        spin_lock_irqsave(&consistent_lock, flags);
-        list_del(&c->vm_list);
-        spin_unlock_irqrestore(&consistent_lock, flags);
-        kfree(c);
+        __dma_free_buffer(dma_to_page(dev, handle), size);
-        return;
- no_area:
-        spin_unlock_irqrestore(&consistent_lock, flags);
-        printk(KERN_ERR "%s: trying to free invalid coherent area: %p\n",
-               __func__, cpu_addr);
-        dump_stack();
 }
-#else   /* !CONFIG_MMU */
-void dma_free_coherent(struct device *dev, size_t size, void *cpu_addr, dma_addr_t handle)
-{
-        if (dma_release_from_coherent(dev, get_order(size), cpu_addr))
-                return;
-        kfree(cpu_addr);
-}
-#endif  /* CONFIG_MMU */
 EXPORT_SYMBOL(dma_free_coherent);
 /*
- * Initialise the consistent memory allocation.
- */
-static int __init consistent_init(void)
-{
-        int ret = 0;
-#ifdef CONFIG_MMU
-        pgd_t *pgd;
-        pmd_t *pmd;
-        pte_t *pte;
-        int i = 0;
-        u32 base = CONSISTENT_BASE;
-        do {
-                pgd = pgd_offset(&init_mm, base);
-                pmd = pmd_alloc(&init_mm, pgd, base);
-                if (!pmd) {
-                        printk(KERN_ERR "%s: no pmd tables\n", __func__);
-                        ret = -ENOMEM;
-                        break;
-                }
-                WARN_ON(!pmd_none(*pmd));
-                pte = pte_alloc_kernel(pmd, base);
-                if (!pte) {
-                        printk(KERN_ERR "%s: no pte tables\n", __func__);
-                        ret = -ENOMEM;
-                        break;
-                }
-                consistent_pte[i++] = pte;
-                base += (1 << PGDIR_SHIFT);
-        } while (base < CONSISTENT_END);
-#endif  /* !CONFIG_MMU */
-        return ret;
-}
-core_initcall(consistent_init);
-/*
 * Make an area consistent for devices.
 * Note: Drivers should NOT use this function directly, as it will break
 * platforms with CONFIG_DMABOUNCE.
diff --git a/arch/arm/mm/fault-armv.c b/arch/arm/mm/fault-armv.c
index d0d17b6a3703..729602291958 100644
--- a/arch/arm/mm/fault-armv.c
+++ b/arch/arm/mm/fault-armv.c
@@ -23,6 +23,8 @@
 #include <asm/pgtable.h>
 #include <asm/tlbflush.h>
+#include "mm.h"
 static unsigned long shared_pte_mask = L_PTE_MT_BUFFERABLE;
 /*
@@ -151,7 +153,14 @@ void update_mmu_cache(struct vm_area_struct *vma, unsigned long addr, pte_t pte)
        if (!pfn_valid(pfn))
                return;
+        /*
+         * The zero page is never written to, so never has any dirty
+         * cache lines, and therefore never needs to be flushed.
+         */
        page = pfn_to_page(pfn);
+        if (page == ZERO_PAGE(0))
+                return;
        mapping = page_mapping(page);
 #ifndef CONFIG_SMP
        if (test_and_clear_bit(PG_dcache_dirty, &page->flags))
diff --git a/arch/arm/mm/flush.c b/arch/arm/mm/flush.c
index b27942909b23..329594e760cd 100644
--- a/arch/arm/mm/flush.c
+++ b/arch/arm/mm/flush.c
@@ -18,10 +18,6 @@
 #include "mm.h"
-#ifdef CONFIG_ARM_ERRATA_411920
-extern void v6_icache_inval_all(void);
-#endif
 #ifdef CONFIG_CPU_CACHE_VIPT
 #define ALIAS_FLUSH_START       0xffff4000
@@ -35,77 +31,61 @@ static void flush_pfn_alias(unsigned long pfn, unsigned long vaddr)
        flush_tlb_kernel_page(to);
        asm(    "mcrr   p15, 0, %1, %0, c14\n"
-        "       mcr     p15, 0, %2, c7, c10, 4\n"
+        "       mcr     p15, 0, %2, c7, c10, 4"
-#ifndef CONFIG_ARM_ERRATA_411920
-        "       mcr     p15, 0, %2, c7, c5, 0\n"
-#endif
            :
            : "r" (to), "r" (to + PAGE_SIZE - L1_CACHE_BYTES), "r" (zero)
            : "cc");
-#ifdef CONFIG_ARM_ERRATA_411920
-        v6_icache_inval_all();
-#endif
 }
 void flush_cache_mm(struct mm_struct *mm)
 {
        if (cache_is_vivt()) {
-                if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(mm)))
+                vivt_flush_cache_mm(mm);
-                        __cpuc_flush_user_all();
                return;
        }
        if (cache_is_vipt_aliasing()) {
                asm(    "mcr    p15, 0, %0, c7, c14, 0\n"
-                "       mcr     p15, 0, %0, c7, c10, 4\n"
+                "       mcr     p15, 0, %0, c7, c10, 4"
-#ifndef CONFIG_ARM_ERRATA_411920
-                "       mcr     p15, 0, %0, c7, c5, 0\n"
-#endif
                    :
                    : "r" (0)
                    : "cc");
-#ifdef CONFIG_ARM_ERRATA_411920
-                v6_icache_inval_all();
-#endif
        }
 }
 void flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned long end)
 {
        if (cache_is_vivt()) {
-                if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm)))
+                vivt_flush_cache_range(vma, start, end);
-                        __cpuc_flush_user_range(start & PAGE_MASK, PAGE_ALIGN(end),
-                                                vma->vm_flags);
                return;
        }
        if (cache_is_vipt_aliasing()) {
                asm(    "mcr    p15, 0, %0, c7, c14, 0\n"
-                "       mcr     p15, 0, %0, c7, c10, 4\n"
+                "       mcr     p15, 0, %0, c7, c10, 4"
-#ifndef CONFIG_ARM_ERRATA_411920
-                "       mcr     p15, 0, %0, c7, c5, 0\n"
-#endif
                    :
                    : "r" (0)
                    : "cc");
-#ifdef CONFIG_ARM_ERRATA_411920
-                v6_icache_inval_all();
-#endif
        }
+        if (vma->vm_flags & VM_EXEC)
+                __flush_icache_all();
 }
 void flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr, unsigned long pfn)
 {
        if (cache_is_vivt()) {
-                if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm))) {
+                vivt_flush_cache_page(vma, user_addr, pfn);
-                        unsigned long addr = user_addr & PAGE_MASK;
-                        __cpuc_flush_user_range(addr, addr + PAGE_SIZE, vma->vm_flags);
-                }
                return;
        }
-        if (cache_is_vipt_aliasing())
+        if (cache_is_vipt_aliasing()) {
                flush_pfn_alias(pfn, user_addr);
+                __flush_icache_all();
+        }
+        if (vma->vm_flags & VM_EXEC && icache_is_vivt_asid_tagged())
+                __flush_icache_all();
 }
 void flush_ptrace_access(struct vm_area_struct *vma, struct page *page,
@@ -113,15 +93,13 @@ void flush_ptrace_access(struct vm_area_struct *vma, struct page *page,
                         unsigned long len, int write)
 {
        if (cache_is_vivt()) {
-                if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm))) {
+                vivt_flush_ptrace_access(vma, page, uaddr, kaddr, len, write);
-                        unsigned long addr = (unsigned long)kaddr;
-                        __cpuc_coherent_kern_range(addr, addr + len);
-                }
                return;
        }
        if (cache_is_vipt_aliasing()) {
                flush_pfn_alias(page_to_pfn(page), uaddr);
+                __flush_icache_all();
                return;
        }
@@ -139,6 +117,8 @@ void flush_ptrace_access(struct vm_area_struct *vma, struct page *page,
 void __flush_dcache_page(struct address_space *mapping, struct page *page)
 {
+        void *addr = page_address(page);
        /*
         * Writeback any data associated with the kernel mapping of this
         * page.  This ensures that data in the physical page is mutually
@@ -149,9 +129,9 @@ void __flush_dcache_page(struct address_space *mapping, struct page *page)
         * kmap_atomic() doesn't set the page virtual address, and
         * kunmap_atomic() takes care of cache flushing already.
         */
-        if (page_address(page))
+        if (addr)
 #endif
-                __cpuc_flush_dcache_page(page_address(page));
+                __cpuc_flush_dcache_page(addr);
        /*
         * If this is a page cache page, and we have an aliasing VIPT cache,
@@ -215,7 +195,16 @@ static void __flush_dcache_aliases(struct address_space *mapping, struct page *p
 */
 void flush_dcache_page(struct page *page)
 {
-        struct address_space *mapping = page_mapping(page);
+        struct address_space *mapping;
+        /*
+         * The zero page is never written to, so never has any dirty
+         * cache lines, and therefore never needs to be flushed.
+         */
+        if (page == ZERO_PAGE(0))
+                return;
+        mapping = page_mapping(page);
 #ifndef CONFIG_SMP
        if (!PageHighMem(page) && mapping && !mapping_mapped(mapping))
@@ -261,6 +250,7 @@ void __flush_anon_page(struct vm_area_struct *vma, struct page *page, unsigned l
                 * userspace address only.
                 */
                flush_pfn_alias(pfn, vmaddr);
+                __flush_icache_all();
        }
        /*
diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
index 40940d7ce4ff..52c40d155672 100644
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -273,7 +273,6 @@ static void __init bootmem_init_node(int node, struct meminfo *mi,
                struct membank *bank = &mi->bank[i];
                if (!bank->highmem)
                        free_bootmem_node(pgdat, bank_phys_start(bank), bank_phys_size(bank));
-                memory_present(node, bank_pfn_start(bank), bank_pfn_end(bank));
        }
        /*
@@ -370,6 +369,19 @@ int pfn_valid(unsigned long pfn)
        return 0;
 }
 EXPORT_SYMBOL(pfn_valid);
+static void arm_memory_present(struct meminfo *mi, int node)
+{
+}
+#else
+static void arm_memory_present(struct meminfo *mi, int node)
+{
+        int i;
+        for_each_nodebank(i, mi, node) {
+                struct membank *bank = &mi->bank[i];
+                memory_present(node, bank_pfn_start(bank), bank_pfn_end(bank));
+        }
+}
 #endif
 static int __init meminfo_cmp(const void *_a, const void *_b)
@@ -427,6 +439,12 @@ void __init bootmem_init(void)
                 */
                if (node == initrd_node)
                        bootmem_reserve_initrd(node);
+                /*
+                 * Sparsemem tries to allocate bootmem in memory_present(),
+                 * so must be done after the fixed reservations
+                 */
+                arm_memory_present(mi, node);
        }
        /*
diff --git a/arch/arm/mm/mm.h b/arch/arm/mm/mm.h
index c4f6f05198e0..a888363398f8 100644
--- a/arch/arm/mm/mm.h
+++ b/arch/arm/mm/mm.h
@@ -24,6 +24,8 @@ struct mem_type {
 const struct mem_type *get_mem_type(unsigned int type);
+extern void __flush_dcache_page(struct address_space *mapping, struct page *page);
 #endif
 struct map_desc;
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index 02243eeccf50..2427cdcd9098 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -117,6 +117,13 @@ static void __init early_cachepolicy(char **p)
        }
        if (i == ARRAY_SIZE(cache_policies))
                printk(KERN_ERR "ERROR: unknown or unsupported cache policy\n");
+        /*
+         * This restriction is partly to do with the way we boot; it is
+         * unpredictable to have memory mapped using two different sets of
+         * memory attributes (shared, type, and cache attribs).  We can not
+         * change these attributes once the initial assembly has setup the
+         * page tables.
+         */
        if (cpu_architecture() >= CPU_ARCH_ARMv6) {
                printk(KERN_WARNING "Only cachepolicy=writeback supported on ARMv6 and later\n");
                cachepolicy = CPOLICY_WRITEBACK;
@@ -1029,7 +1036,7 @@ void __init paging_init(struct machine_desc *mdesc)
         */
        zero_page = alloc_bootmem_low_pages(PAGE_SIZE);
        empty_zero_page = virt_to_page(zero_page);
-        flush_dcache_page(empty_zero_page);
+        __flush_dcache_page(NULL, empty_zero_page);
 }
 /*
diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S
index 194737d60a22..70f75d2e3ead 100644
--- a/arch/arm/mm/proc-v6.S
+++ b/arch/arm/mm/proc-v6.S
@@ -32,8 +32,10 @@
 #ifndef CONFIG_SMP
 #define TTB_FLAGS       TTB_RGN_WBWA
+#define PMD_FLAGS       PMD_SECT_WB
 #else
 #define TTB_FLAGS       TTB_RGN_WBWA|TTB_S
+#define PMD_FLAGS       PMD_SECT_WBWA|PMD_SECT_S
 #endif
 ENTRY(cpu_v6_proc_init)
@@ -222,10 +224,9 @@ __v6_proc_info:
        .long   0x0007b000
        .long   0x0007f000
        .long   PMD_TYPE_SECT | \
-                PMD_SECT_BUFFERABLE | \
-                PMD_SECT_CACHEABLE | \
                PMD_SECT_AP_WRITE | \
-                PMD_SECT_AP_READ
+                PMD_SECT_AP_READ | \
+                PMD_FLAGS
        .long   PMD_TYPE_SECT | \
                PMD_SECT_XN | \
                PMD_SECT_AP_WRITE | \
diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S
index 23ebcf6eab9f..3a285218fd15 100644
--- a/arch/arm/mm/proc-v7.S
+++ b/arch/arm/mm/proc-v7.S
@@ -33,9 +33,11 @@
 #ifndef CONFIG_SMP
 /* PTWs cacheable, inner WB not shareable, outer WB not shareable */
 #define TTB_FLAGS       TTB_IRGN_WB|TTB_RGN_OC_WB
+#define PMD_FLAGS       PMD_SECT_WB
 #else
 /* PTWs cacheable, inner WBWA shareable, outer WBWA not shareable */
 #define TTB_FLAGS       TTB_IRGN_WBWA|TTB_S|TTB_NOS|TTB_RGN_OC_WBWA
+#define PMD_FLAGS       PMD_SECT_WBWA|PMD_SECT_S
 #endif
 ENTRY(cpu_v7_proc_init)
@@ -184,9 +186,10 @@ cpu_v7_name:
 */
 __v7_setup:
 #ifdef CONFIG_SMP
-        mrc     p15, 0, r0, c1, c0, 1           @ Enable SMP/nAMP mode and
+        mrc     p15, 0, r0, c1, c0, 1
-        orr     r0, r0, #(1 << 6) | (1 << 0)    @ TLB ops broadcasting
+        tst     r0, #(1 << 6)                   @ SMP/nAMP mode enabled?
-        mcr     p15, 0, r0, c1, c0, 1
+        orreq   r0, r0, #(1 << 6) | (1 << 0)    @ Enable SMP/nAMP mode and
+        mcreq   p15, 0, r0, c1, c0, 1           @ TLB ops broadcasting
 #endif
        adr     r12, __v7_setup_stack           @ the local stack
        stmia   r12, {r0-r5, r7, r9, r11, lr}
@@ -326,10 +329,9 @@ __v7_proc_info:
        .long   0x000f0000              @ Required ID value
        .long   0x000f0000              @ Mask for ID
        .long   PMD_TYPE_SECT | \
-                PMD_SECT_BUFFERABLE | \
-                PMD_SECT_CACHEABLE | \
                PMD_SECT_AP_WRITE | \
-                PMD_SECT_AP_READ
+                PMD_SECT_AP_READ | \
+                PMD_FLAGS
        .long   PMD_TYPE_SECT | \
                PMD_SECT_XN | \
                PMD_SECT_AP_WRITE | \
diff --git a/arch/arm/mm/vmregion.c b/arch/arm/mm/vmregion.c
new file mode 100644
index 000000000000..19e09bdb1b8a
--- /dev/null
+++ b/arch/arm/mm/vmregion.c
@@ -0,0 +1,131 @@
+#include <linux/spinlock.h>
+#include <linux/list.h>
+#include <linux/slab.h>
+#include "vmregion.h"
+/*
+ * VM region handling support.
+ *
+ * This should become something generic, handling VM region allocations for
+ * vmalloc and similar (ioremap, module space, etc).
+ *
+ * I envisage vmalloc()'s supporting vm_struct becoming:
+ *
+ *  struct vm_struct {
+ *    struct vmregion   region;
+ *    unsigned long     flags;
+ *    struct page       **pages;
+ *    unsigned int      nr_pages;
+ *    unsigned long     phys_addr;
+ *  };
+ *
+ * get_vm_area() would then call vmregion_alloc with an appropriate
+ * struct vmregion head (eg):
+ *
+ *  struct vmregion vmalloc_head = {
+ *      .vm_list        = LIST_HEAD_INIT(vmalloc_head.vm_list),
+ *      .vm_start       = VMALLOC_START,
+ *      .vm_end         = VMALLOC_END,
+ *  };
+ *
+ * However, vmalloc_head.vm_start is variable (typically, it is dependent on
+ * the amount of RAM found at boot time.)  I would imagine that get_vm_area()
+ * would have to initialise this each time prior to calling vmregion_alloc().
+ */
+struct arm_vmregion *
+arm_vmregion_alloc(struct arm_vmregion_head *head, size_t size, gfp_t gfp)
+{
+        unsigned long addr = head->vm_start, end = head->vm_end - size;
+        unsigned long flags;
+        struct arm_vmregion *c, *new;
+        if (head->vm_end - head->vm_start < size) {
+                printk(KERN_WARNING "%s: allocation too big (requested %#x)\n",
+                        __func__, size);
+                goto out;
+        }
+        new = kmalloc(sizeof(struct arm_vmregion), gfp);
+        if (!new)
+                goto out;
+        spin_lock_irqsave(&head->vm_lock, flags);
+        list_for_each_entry(c, &head->vm_list, vm_list) {
+                if ((addr + size) < addr)
+                        goto nospc;
+                if ((addr + size) <= c->vm_start)
+                        goto found;
+                addr = c->vm_end;
+                if (addr > end)
+                        goto nospc;
+        }
+ found:
+        /*
+         * Insert this entry _before_ the one we found.
+         */
+        list_add_tail(&new->vm_list, &c->vm_list);
+        new->vm_start = addr;
+        new->vm_end = addr + size;
+        new->vm_active = 1;
+        spin_unlock_irqrestore(&head->vm_lock, flags);
+        return new;
+ nospc:
+        spin_unlock_irqrestore(&head->vm_lock, flags);
+        kfree(new);
+ out:
+        return NULL;
+}
+static struct arm_vmregion *__arm_vmregion_find(struct arm_vmregion_head *head, unsigned long addr)
+{
+        struct arm_vmregion *c;
+        list_for_each_entry(c, &head->vm_list, vm_list) {
+                if (c->vm_active && c->vm_start == addr)
+                        goto out;
+        }
+        c = NULL;
+ out:
+        return c;
+}
+struct arm_vmregion *arm_vmregion_find(struct arm_vmregion_head *head, unsigned long addr)
+{
+        struct arm_vmregion *c;
+        unsigned long flags;
+        spin_lock_irqsave(&head->vm_lock, flags);
+        c = __arm_vmregion_find(head, addr);
+        spin_unlock_irqrestore(&head->vm_lock, flags);
+        return c;
+}
+struct arm_vmregion *arm_vmregion_find_remove(struct arm_vmregion_head *head, unsigned long addr)
+{
+        struct arm_vmregion *c;
+        unsigned long flags;
+        spin_lock_irqsave(&head->vm_lock, flags);
+        c = __arm_vmregion_find(head, addr);
+        if (c)
+                c->vm_active = 0;
+        spin_unlock_irqrestore(&head->vm_lock, flags);
+        return c;
+}
+void arm_vmregion_free(struct arm_vmregion_head *head, struct arm_vmregion *c)
+{
+        unsigned long flags;
+        spin_lock_irqsave(&head->vm_lock, flags);
+        list_del(&c->vm_list);
+        spin_unlock_irqrestore(&head->vm_lock, flags);
+        kfree(c);
+}
diff --git a/arch/arm/mm/vmregion.h b/arch/arm/mm/vmregion.h
new file mode 100644
index 000000000000..6b2cdbdf3a85
--- /dev/null
+++ b/arch/arm/mm/vmregion.h
@@ -0,0 +1,29 @@
+#ifndef VMREGION_H
+#define VMREGION_H
+#include <linux/spinlock.h>
+#include <linux/list.h>
+struct page;
+struct arm_vmregion_head {
+        spinlock_t              vm_lock;
+        struct list_head        vm_list;
+        unsigned long           vm_start;
+        unsigned long           vm_end;
+};
+struct arm_vmregion {
+        struct list_head        vm_list;
+        unsigned long           vm_start;
+        unsigned long           vm_end;
+        struct page             *vm_pages;
+        int                     vm_active;
+};
+struct arm_vmregion *arm_vmregion_alloc(struct arm_vmregion_head *, size_t, gfp_t);
+struct arm_vmregion *arm_vmregion_find(struct arm_vmregion_head *, unsigned long);
+struct arm_vmregion *arm_vmregion_find_remove(struct arm_vmregion_head *, unsigned long);
+void arm_vmregion_free(struct arm_vmregion_head *, struct arm_vmregion *);
+#endif
diff --git a/arch/arm/oprofile/op_model_v6.c b/arch/arm/oprofile/op_model_v6.c
index fe581383d3e2..f7d2ec5ee9a1 100644
--- a/arch/arm/oprofile/op_model_v6.c
+++ b/arch/arm/oprofile/op_model_v6.c
@@ -33,6 +33,9 @@ static int irqs[] = {
 #ifdef CONFIG_ARCH_OMAP2
        3,
 #endif
+#ifdef CONFIG_ARCH_BCMRING
+        IRQ_PMUIRQ, /* for BCMRING, ARM PMU interrupt is 43 */
+#endif
 };
 static void armv6_pmu_stop(void)
diff --git a/arch/arm/plat-nomadik/Kconfig b/arch/arm/plat-nomadik/Kconfig
new file mode 100644
index 000000000000..159daf583f85
--- /dev/null
+++ b/arch/arm/plat-nomadik/Kconfig
@@ -0,0 +1,22 @@
+# We keep common IP's here for Nomadik and other similar
+# familiy of processors from ST-Ericsson. At the moment we have
+# just MTU, others to follow soon.
+config PLAT_NOMADIK
+        bool
+        depends on ARCH_NOMADIK || ARCH_U8500
+        default y
+        help
+          Common platform code for Nomadik and other ST-Ericsson
+          platforms.
+if PLAT_NOMADIK
+config HAS_MTU
+        bool
+        help
+          Support for Multi Timer Unit. MTU provides access
+          to multiple interrupt generating programmable
+          32-bit free running decrementing counters.
+endif
diff --git a/arch/arm/plat-nomadik/Makefile b/arch/arm/plat-nomadik/Makefile
new file mode 100644
index 000000000000..37c7cdd0f8f0
--- /dev/null
+++ b/arch/arm/plat-nomadik/Makefile
@@ -0,0 +1,5 @@
+# arch/arm/plat-nomadik/Makefile
+# Copyright 2009 ST-Ericsson
+# Licensed under GPLv2
+obj-$(CONFIG_HAS_MTU)   += timer.o
diff --git a/arch/arm/mach-nomadik/include/mach/mtu.h b/arch/arm/plat-nomadik/include/plat/mtu.h
index 76da7f085330..42c907258b14 100644
--- a/arch/arm/mach-nomadik/include/mach/mtu.h
+++ b/arch/arm/plat-nomadik/include/plat/mtu.h
@@ -1,5 +1,8 @@
-#ifndef __ASM_ARCH_MTU_H
+#ifndef __PLAT_MTU_H
-#define __ASM_ARCH_MTU_H
+#define __PLAT_MTU_H
+/* should be set by the platform code */
+extern void __iomem *mtu_base;
 /*
 * The MTU device hosts four different counters, with 4 set of
@@ -41,5 +44,5 @@
 #define MTU_PCELL2      0xff8
 #define MTU_PCELL3      0xffC
-#endif /* __ASM_ARCH_MTU_H */
+#endif /* __PLAT_MTU_H */
diff --git a/arch/arm/mach-nomadik/timer.c b/arch/arm/plat-nomadik/timer.c
index d1738e7061d4..62f18ad43a28 100644
--- a/arch/arm/mach-nomadik/timer.c
+++ b/arch/arm/plat-nomadik/timer.c
@@ -15,19 +15,14 @@
 #include <linux/clockchips.h>
 #include <linux/jiffies.h>
 #include <asm/mach/time.h>
-#include <mach/mtu.h>
-#define TIMER_CTRL      0x80    /* No divisor */
+#include <plat/mtu.h>
-#define TIMER_PERIODIC  0x40
-#define TIMER_SZ32BIT   0x02
-/* Initial value for SRC control register: all timers use MXTAL/8 source */
-#define SRC_CR_INIT_MASK        0x00007fff
-#define SRC_CR_INIT_VAL         0x2aaa8000
 static u32      nmdk_count;             /* accumulated count */
 static u32      nmdk_cycle;             /* write-once */
-static __iomem void *mtu_base;
+/* setup by the platform code */
+void __iomem *mtu_base;
 /*
 * clocksource: the MTU device is a decrementing counters, so we negate
@@ -93,7 +88,7 @@ static struct clock_event_device nmdk_clkevt = {
 static irqreturn_t nmdk_timer_interrupt(int irq, void *dev_id)
 {
        /* ack: "interrupt clear register" */
-        writel( 1 << 0, mtu_base + MTU_ICR);
+        writel(1 << 0, mtu_base + MTU_ICR);
        /* we can't count lost ticks, unfortunately */
        nmdk_count += nmdk_cycle;
@@ -125,24 +120,14 @@ static void nmdk_timer_reset(void)
        writel(cr | MTU_CRn_ENA, mtu_base + MTU_CR(0));
 }
-static void __init nmdk_timer_init(void)
+void __init nmdk_timer_init(void)
 {
-        u32 src_cr;
        unsigned long rate;
        int bits;
        rate = CLOCK_TICK_RATE; /* 2.4MHz */
        nmdk_cycle = (rate + HZ/2) / HZ;
-        /* Configure timer sources in "system reset controller" ctrl reg */
-        src_cr = readl(io_p2v(NOMADIK_SRC_BASE));
-        src_cr &= SRC_CR_INIT_MASK;
-        src_cr |= SRC_CR_INIT_VAL;
-        writel(src_cr, io_p2v(NOMADIK_SRC_BASE));
-        /* Save global pointer to mtu, used by functions above */
-        mtu_base = io_p2v(NOMADIK_MTU0_BASE);
        /* Init the timer and register clocksource */
        nmdk_timer_reset();
@@ -150,7 +135,9 @@ static void __init nmdk_timer_init(void)
        bits =  8*sizeof(nmdk_count);
        nmdk_clksrc.mask = CLOCKSOURCE_MASK(bits);
-        clocksource_register(&nmdk_clksrc);
+        if (clocksource_register(&nmdk_clksrc))
+                printk(KERN_ERR "timer: failed to initialize clock "
+                        "source %s\n", nmdk_clksrc.name);
        /* Register irq and clockevents */
        setup_irq(IRQ_MTU0, &nmdk_timer_irq);
@@ -158,7 +145,3 @@ static void __init nmdk_timer_init(void)
        nmdk_clkevt.cpumask = cpumask_of(0);
        clockevents_register_device(&nmdk_clkevt);
 }
-struct sys_timer nomadik_timer = {
-        .init           = nmdk_timer_init,
-};
diff --git a/arch/arm/plat-omap/cpu-omap.c b/arch/arm/plat-omap/cpu-omap.c
index 1868c0d8f9b5..341235c278ac 100644
--- a/arch/arm/plat-omap/cpu-omap.c
+++ b/arch/arm/plat-omap/cpu-omap.c
@@ -127,7 +127,7 @@ static int __init omap_cpu_init(struct cpufreq_policy *policy)
        }
        /* FIXME: what's the actual transition time? */
-        policy->cpuinfo.transition_latency = 10 * 1000 * 1000;
+        policy->cpuinfo.transition_latency = 300 * 1000;
        return 0;
 }
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index 0eb676d7e807..68eaae324b6a 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -691,13 +691,16 @@ static inline void disable_lnk(int lch)
 static inline void omap2_enable_irq_lch(int lch)
 {
        u32 val;
+        unsigned long flags;
        if (!cpu_class_is_omap2())
                return;
+        spin_lock_irqsave(&dma_chan_lock, flags);
        val = dma_read(IRQENABLE_L0);
        val |= 1 << lch;
        dma_write(val, IRQENABLE_L0);
+        spin_unlock_irqrestore(&dma_chan_lock, flags);
 }
 int omap_request_dma(int dev_id, const char *dev_name,
@@ -799,10 +802,13 @@ void omap_free_dma(int lch)
        if (cpu_class_is_omap2()) {
                u32 val;
+                spin_lock_irqsave(&dma_chan_lock, flags);
                /* Disable interrupts */
                val = dma_read(IRQENABLE_L0);
                val &= ~(1 << lch);
                dma_write(val, IRQENABLE_L0);
+                spin_unlock_irqrestore(&dma_chan_lock, flags);
                /* Clear the CSR register and IRQ status register */
                dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR(lch));
@@ -978,6 +984,14 @@ void omap_stop_dma(int lch)
 {
        u32 l;
+        /* Disable all interrupts on the channel */
+        if (cpu_class_is_omap1())
+                dma_write(0, CICR(lch));
+        l = dma_read(CCR(lch));
+        l &= ~OMAP_DMA_CCR_EN;
+        dma_write(l, CCR(lch));
        if (!omap_dma_in_1510_mode() && dma_chan[lch].next_lch != -1) {
                int next_lch, cur_lch = lch;
                char dma_chan_link_map[OMAP_DMA4_LOGICAL_DMA_CH_COUNT];
@@ -995,18 +1009,8 @@ void omap_stop_dma(int lch)
                        next_lch = dma_chan[cur_lch].next_lch;
                        cur_lch = next_lch;
                } while (next_lch != -1);
-                return;
        }
-        /* Disable all interrupts on the channel */
-        if (cpu_class_is_omap1())
-                dma_write(0, CICR(lch));
-        l = dma_read(CCR(lch));
-        l &= ~OMAP_DMA_CCR_EN;
-        dma_write(l, CCR(lch));
        dma_chan[lch].flags &= ~OMAP_DMA_ACTIVE;
 }
 EXPORT_SYMBOL(omap_stop_dma);
@@ -1110,6 +1114,14 @@ int omap_dma_running(void)
 {
        int lch;
+        /*
+         * On OMAP1510, internal LCD controller will start the transfer
+         * when it gets enabled, so assume DMA running if LCD enabled.
+         */
+        if (cpu_is_omap1510())
+                if (omap_readw(0xfffec000 + 0x00) & (1 << 0))
+                        return 1;
        /* Check if LCD DMA is running */
        if (cpu_is_omap16xx())
                if (omap_readw(OMAP1610_DMA_LCD_CCR) & OMAP_DMA_CCR_EN)
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index 71ebd7fcfea1..7c345b757df1 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -373,7 +373,7 @@ static inline int gpio_valid(int gpio)
 static int check_gpio(int gpio)
 {
-        if (unlikely(gpio_valid(gpio)) < 0) {
+        if (unlikely(gpio_valid(gpio) < 0)) {
                printk(KERN_ERR "omap-gpio: invalid GPIO %d\n", gpio);
                dump_stack();
                return -1;
diff --git a/arch/arm/plat-omap/include/mach/keypad.h b/arch/arm/plat-omap/include/mach/keypad.h
index d91b9be334ff..3ae52ccc793c 100644
--- a/arch/arm/plat-omap/include/mach/keypad.h
+++ b/arch/arm/plat-omap/include/mach/keypad.h
@@ -10,7 +10,7 @@
 #ifndef ASMARM_ARCH_KEYPAD_H
 #define ASMARM_ARCH_KEYPAD_H
-#include <linux/input/matrix_keypad.h>
+#warning: Please update the board to use matrix_keypad.h instead
 struct omap_kp_platform_data {
        int rows;
@@ -37,6 +37,9 @@ struct omap_kp_platform_data {
 #define KEY_PERSISTENT          0x00800000
 #define KEYNUM_MASK             0x00EFFFFF
+#define KEY(col, row, val) (((col) << 28) | ((row) << 24) | (val))
+#define PERSISTENT_KEY(col, row) (((col) << 28) | ((row) << 24) | \
+                                                KEY_PERSISTENT)
 #endif
diff --git a/arch/arm/plat-omap/include/mach/memory.h b/arch/arm/plat-omap/include/mach/memory.h
index 9ad41dc484c1..3325f7b49eaa 100644
--- a/arch/arm/plat-omap/include/mach/memory.h
+++ b/arch/arm/plat-omap/include/mach/memory.h
@@ -68,6 +68,13 @@
                __dma = __dma - PHYS_OFFSET + OMAP1510_LB_OFFSET; \
           __dma; })
+#define __arch_dma_to_page(dev, addr)   \
+        ({ dma_addr_t __dma = addr;                             \
+           if (is_lbus_device(dev))                             \
+                __dma += PHYS_OFFSET - OMAP1510_LB_OFFSET;      \
+           phys_to_page(__dma);                                 \
+        })
 #define __arch_dma_to_virt(dev, addr)   ({ (void *) (is_lbus_device(dev) ? \
                                                lbus_to_virt(addr) : \
                                                __phys_to_virt(addr)); })
diff --git a/arch/arm/plat-omap/iommu.c b/arch/arm/plat-omap/iommu.c
index 4b6012707307..94584f167a82 100644
--- a/arch/arm/plat-omap/iommu.c
+++ b/arch/arm/plat-omap/iommu.c
@@ -664,7 +664,7 @@ static size_t iopgtable_clear_entry_core(struct iommu *obj, u32 da)
                nent = 1; /* for the next L1 entry */
        } else {
                bytes = IOPGD_SIZE;
-                if (*iopgd & IOPGD_SUPER) {
+                if ((*iopgd & IOPGD_SUPER) == IOPGD_SUPER) {
                        nent *= 16;
                        /* rewind to the 1st entry */
                        iopgd = (u32 *)((u32)iopgd & IOSUPER_MASK);
diff --git a/arch/arm/plat-pxa/include/plat/mfp.h b/arch/arm/plat-pxa/include/plat/mfp.h
index 22086e696e8e..857a6839071c 100644
--- a/arch/arm/plat-pxa/include/plat/mfp.h
+++ b/arch/arm/plat-pxa/include/plat/mfp.h
@@ -16,7 +16,7 @@
 #ifndef __ASM_PLAT_MFP_H
 #define __ASM_PLAT_MFP_H
-#define mfp_to_gpio(m)  ((m) % 128)
+#define mfp_to_gpio(m)  ((m) % 256)
 /* list of all the configurable MFP pins */
 enum {
diff --git a/arch/arm/plat-pxa/mfp.c b/arch/arm/plat-pxa/mfp.c
index 9405d0379c85..be58f9fe65b0 100644
--- a/arch/arm/plat-pxa/mfp.c
+++ b/arch/arm/plat-pxa/mfp.c
@@ -207,7 +207,7 @@ unsigned long mfp_read(int mfp)
 {
        unsigned long val, flags;
-        BUG_ON(mfp >= MFP_PIN_MAX);
+        BUG_ON(mfp < 0 || mfp >= MFP_PIN_MAX);
        spin_lock_irqsave(&mfp_spin_lock, flags);
        val = mfpr_readl(mfp_table[mfp].mfpr_off);
@@ -220,7 +220,7 @@ void mfp_write(int mfp, unsigned long val)
 {
        unsigned long flags;
-        BUG_ON(mfp >= MFP_PIN_MAX);
+        BUG_ON(mfp < 0 || mfp >= MFP_PIN_MAX);
        spin_lock_irqsave(&mfp_spin_lock, flags);
        mfpr_writel(mfp_table[mfp].mfpr_off, val);
diff --git a/arch/arm/plat-s3c24xx/adc.c b/arch/arm/plat-s3c24xx/adc.c
index 4d36b784fb8b..df47322492d5 100644
--- a/arch/arm/plat-s3c24xx/adc.c
+++ b/arch/arm/plat-s3c24xx/adc.c
@@ -189,7 +189,7 @@ int s3c_adc_read(struct s3c_adc_client *client, unsigned int ch)
 err:
        return ret;
 }
-EXPORT_SYMBOL_GPL(s3c_adc_convert);
+EXPORT_SYMBOL_GPL(s3c_adc_read);
 static void s3c_adc_default_select(struct s3c_adc_client *client,
                                   unsigned select)
diff --git a/arch/arm/plat-s3c24xx/cpu.c b/arch/arm/plat-s3c24xx/cpu.c
index 5447e60f3936..4af9dd948793 100644
--- a/arch/arm/plat-s3c24xx/cpu.c
+++ b/arch/arm/plat-s3c24xx/cpu.c
@@ -61,6 +61,7 @@ static const char name_s3c2410[]  = "S3C2410";
 static const char name_s3c2412[]  = "S3C2412";
 static const char name_s3c2440[]  = "S3C2440";
 static const char name_s3c2442[]  = "S3C2442";
+static const char name_s3c2442b[]  = "S3C2442B";
 static const char name_s3c2443[]  = "S3C2443";
 static const char name_s3c2410a[] = "S3C2410A";
 static const char name_s3c2440a[] = "S3C2440A";
@@ -112,6 +113,15 @@ static struct cpu_table cpu_ids[] __initdata = {
                .name           = name_s3c2442
        },
        {
+                .idcode         = 0x32440aab,
+                .idmask         = 0xffffffff,
+                .map_io         = s3c244x_map_io,
+                .init_clocks    = s3c244x_init_clocks,
+                .init_uarts     = s3c244x_init_uarts,
+                .init           = s3c2442_init,
+                .name           = name_s3c2442b
+        },
+        {
                .idcode         = 0x32412001,
                .idmask         = 0xffffffff,
                .map_io         = s3c2412_map_io,
diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c
index 196b19123653..f046f8c51084 100644
--- a/arch/arm/plat-s3c24xx/dma.c
+++ b/arch/arm/plat-s3c24xx/dma.c
@@ -208,14 +208,14 @@ s3c2410_dma_loadbuffer(struct s3c2410_dma_chan *chan,
 {
        unsigned long reload;
-        pr_debug("s3c2410_chan_loadbuffer: loading buff %p (0x%08lx,0x%06x)\n",
-                 buf, (unsigned long)buf->data, buf->size);
        if (buf == NULL) {
                dmawarn("buffer is NULL\n");
                return -EINVAL;
        }
+        pr_debug("s3c2410_chan_loadbuffer: loading buff %p (0x%08lx,0x%06x)\n",
+                 buf, (unsigned long)buf->data, buf->size);
        /* check the state of the channel before we do anything */
        if (chan->load_state == S3C2410_DMALOAD_1LOADED) {
diff --git a/arch/arm/plat-s3c24xx/gpio.c b/arch/arm/plat-s3c24xx/gpio.c
index 95df059b5a1d..5467470badfd 100644
--- a/arch/arm/plat-s3c24xx/gpio.c
+++ b/arch/arm/plat-s3c24xx/gpio.c
@@ -29,6 +29,7 @@
 #include <linux/io.h>
 #include <mach/hardware.h>
+#include <mach/gpio-fns.h>
 #include <asm/irq.h>
 #include <mach/regs-gpio.h>
diff --git a/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h b/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h
index efeb025affc7..c776120b99e6 100644
--- a/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h
+++ b/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h
@@ -222,7 +222,9 @@ extern struct clk *s3c_cpufreq_clk_get(struct device *, const char *);
 /* S3C2410 and compatible exported functions */
 extern void s3c2410_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg);
+extern void s3c2410_set_fvco(struct s3c_cpufreq_config *cfg);
+#ifdef CONFIG_S3C2410_IOTIMING
 extern int s3c2410_iotiming_calc(struct s3c_cpufreq_config *cfg,
                                 struct s3c_iotimings *iot);
@@ -231,8 +233,11 @@ extern int s3c2410_iotiming_get(struct s3c_cpufreq_config *cfg,
 extern void s3c2410_iotiming_set(struct s3c_cpufreq_config *cfg,
                                 struct s3c_iotimings *iot);
+#else
-extern void s3c2410_set_fvco(struct s3c_cpufreq_config *cfg);
+#define s3c2410_iotiming_calc NULL
+#define s3c2410_iotiming_get NULL
+#define s3c2410_iotiming_set NULL
+#endif /* CONFIG_S3C2410_IOTIMING */
 /* S3C2412 compatible routines */
diff --git a/arch/arm/plat-s3c24xx/include/plat/s3c2410.h b/arch/arm/plat-s3c24xx/include/plat/s3c2410.h
index b6deeef8f663..82ab4aad1bbe 100644
--- a/arch/arm/plat-s3c24xx/include/plat/s3c2410.h
+++ b/arch/arm/plat-s3c24xx/include/plat/s3c2410.h
@@ -27,6 +27,7 @@ extern void s3c2410_init_clocks(int xtal);
 #define s3c2410_init_uarts NULL
 #define s3c2410_map_io NULL
 #define s3c2410_init NULL
+#define s3c2410a_init NULL
 #endif
 extern int s3c2410_baseclk_add(void);
diff --git a/arch/arm/plat-s3c64xx/dma.c b/arch/arm/plat-s3c64xx/dma.c
index 266a10745a85..d554b936fcfb 100644
--- a/arch/arm/plat-s3c64xx/dma.c
+++ b/arch/arm/plat-s3c64xx/dma.c
@@ -151,8 +151,6 @@ static void s3c64xx_dma_fill_lli(struct s3c2410_dma_chan *chan,
                src = chan->dev_addr;
                dst = data;
                control0 = PL080_CONTROL_SRC_AHB2;
-                control0 |= (u32)chan->hw_width << PL080_CONTROL_SWIDTH_SHIFT;
-                control0 |= 2 << PL080_CONTROL_DWIDTH_SHIFT;
                control0 |= PL080_CONTROL_DST_INCR;
                break;
@@ -160,8 +158,6 @@ static void s3c64xx_dma_fill_lli(struct s3c2410_dma_chan *chan,
                src = data;
                dst = chan->dev_addr;
                control0 = PL080_CONTROL_DST_AHB2;
-                control0 |= (u32)chan->hw_width << PL080_CONTROL_DWIDTH_SHIFT;
-                control0 |= 2 << PL080_CONTROL_SWIDTH_SHIFT;
                control0 |= PL080_CONTROL_SRC_INCR;
                break;
        default:
@@ -173,6 +169,8 @@ static void s3c64xx_dma_fill_lli(struct s3c2410_dma_chan *chan,
        control1 = size >> chan->hw_width;      /* size in no of xfers */
        control0 |= PL080_CONTROL_PROT_SYS;     /* always in priv. mode */
        control0 |= PL080_CONTROL_TC_IRQ_EN;    /* always fire IRQ */
+        control0 |= (u32)chan->hw_width << PL080_CONTROL_DWIDTH_SHIFT;
+        control0 |= (u32)chan->hw_width << PL080_CONTROL_SWIDTH_SHIFT;
        lli->src_addr = src;
        lli->dst_addr = dst;
@@ -339,6 +337,7 @@ int s3c2410_dma_enqueue(unsigned int channel, void *id,
        struct s3c64xx_dma_buff *next;
        struct s3c64xx_dma_buff *buff;
        struct pl080s_lli *lli;
+        unsigned long flags;
        int ret;
        WARN_ON(!chan);
@@ -366,6 +365,8 @@ int s3c2410_dma_enqueue(unsigned int channel, void *id,
        s3c64xx_dma_fill_lli(chan, lli, data, size);
+        local_irq_save(flags);
        if ((next = chan->next) != NULL) {
                struct s3c64xx_dma_buff *end = chan->end;
                struct pl080s_lli *endlli = end->lli;
@@ -397,6 +398,8 @@ int s3c2410_dma_enqueue(unsigned int channel, void *id,
                s3c64xx_lli_to_regs(chan, lli);
        }
+        local_irq_restore(flags);
        show_lli(lli);
        dbg_showchan(chan);
@@ -560,26 +563,11 @@ int s3c2410_dma_free(unsigned int channel, struct s3c2410_dma_client *client)
 EXPORT_SYMBOL(s3c2410_dma_free);
-static void s3c64xx_dma_tcirq(struct s3c64xx_dmac *dmac, int offs)
-{
-        struct s3c2410_dma_chan *chan = dmac->channels + offs;
-        /* note, we currently do not bother to work out which buffer
-         * or buffers have been completed since the last tc-irq. */
-        if (chan->callback_fn)
-                (chan->callback_fn)(chan, chan->curr->pw, 0, S3C2410_RES_OK);
-}
-static void s3c64xx_dma_errirq(struct s3c64xx_dmac *dmac, int offs)
-{
-        printk(KERN_DEBUG "%s: offs %d\n", __func__, offs);
-}
 static irqreturn_t s3c64xx_dma_irq(int irq, void *pw)
 {
        struct s3c64xx_dmac *dmac = pw;
+        struct s3c2410_dma_chan *chan;
+        enum s3c2410_dma_buffresult res;
        u32 tcstat, errstat;
        u32 bit;
        int offs;
@@ -588,14 +576,54 @@ static irqreturn_t s3c64xx_dma_irq(int irq, void *pw)
        errstat = readl(dmac->regs + PL080_ERR_STATUS);
        for (offs = 0, bit = 1; offs < 8; offs++, bit <<= 1) {
+                struct s3c64xx_dma_buff *buff;
+                if (!(errstat & bit) && !(tcstat & bit))
+                        continue;
+                chan = dmac->channels + offs;
+                res = S3C2410_RES_ERR;
                if (tcstat & bit) {
                        writel(bit, dmac->regs + PL080_TC_CLEAR);
-                        s3c64xx_dma_tcirq(dmac, offs);
+                        res = S3C2410_RES_OK;
                }
-                if (errstat & bit) {
+                if (errstat & bit)
-                        s3c64xx_dma_errirq(dmac, offs);
                        writel(bit, dmac->regs + PL080_ERR_CLEAR);
+                /* 'next' points to the buffer that is next to the
+                 * currently active buffer.
+                 * For CIRCULAR queues, 'next' will be same as 'curr'
+                 * when 'end' is the active buffer.
+                 */
+                buff = chan->curr;
+                while (buff && buff != chan->next
+                                && buff->next != chan->next)
+                        buff = buff->next;
+                if (!buff)
+                        BUG();
+                if (buff == chan->next)
+                        buff = chan->end;
+                s3c64xx_dma_bufffdone(chan, buff, res);
+                /* Free the node and update curr, if non-circular queue */
+                if (!(chan->flags & S3C2410_DMAF_CIRCULAR)) {
+                        chan->curr = buff->next;
+                        s3c64xx_dma_freebuff(buff);
+                }
+                /* Update 'next' */
+                buff = chan->next;
+                if (chan->next == chan->end) {
+                        chan->next = chan->curr;
+                        if (!(chan->flags & S3C2410_DMAF_CIRCULAR))
+                                chan->end = NULL;
+                } else {
+                        chan->next = buff->next;
                }
        }
diff --git a/arch/arm/plat-s3c64xx/include/plat/regs-clock.h b/arch/arm/plat-s3c64xx/include/plat/regs-clock.h
index a8777a755dfa..ff46e7fa957a 100644
--- a/arch/arm/plat-s3c64xx/include/plat/regs-clock.h
+++ b/arch/arm/plat-s3c64xx/include/plat/regs-clock.h
@@ -51,8 +51,8 @@
 #define S3C6400_CLKDIV0_HCLK_SHIFT      (8)
 #define S3C6400_CLKDIV0_MPLL_MASK       (0x1 << 4)
 #define S3C6400_CLKDIV0_MPLL_SHIFT      (4)
-#define S3C6400_CLKDIV0_ARM_MASK        (0x3 << 0)
+#define S3C6400_CLKDIV0_ARM_MASK        (0x7 << 0)
-#define S3C6410_CLKDIV0_ARM_MASK        (0x7 << 0)
+#define S3C6410_CLKDIV0_ARM_MASK        (0xf << 0)
 #define S3C6400_CLKDIV0_ARM_SHIFT       (0)
 /* CLKDIV1 */
diff --git a/arch/arm/plat-s3c64xx/s3c6400-clock.c b/arch/arm/plat-s3c64xx/s3c6400-clock.c
index 9745852261e0..6ffa21eb1b91 100644
--- a/arch/arm/plat-s3c64xx/s3c6400-clock.c
+++ b/arch/arm/plat-s3c64xx/s3c6400-clock.c
@@ -677,6 +677,9 @@ void __init_or_cpufreq s3c6400_setup_clocks(void)
        printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal);
+        /* For now assume the mux always selects the crystal */
+        clk_ext_xtal_mux.parent = xtal_clk;
        epll = s3c6400_get_epll(xtal);
        mpll = s3c6400_get_pll(xtal, __raw_readl(S3C_MPLL_CON));
        apll = s3c6400_get_pll(xtal, __raw_readl(S3C_APLL_CON));
diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types
index 94be7bb6cb9a..07b976da6174 100644
--- a/arch/arm/tools/mach-types
+++ b/arch/arm/tools/mach-types
@@ -12,7 +12,7 @@
 #
 #   http://www.arm.linux.org.uk/developer/machines/?action=new
 #
-# Last update: Fri Sep 18 21:42:00 2009
+# Last update: Wed Nov 25 22:14:58 2009
 #
 # machine_is_xxx        CONFIG_xxxx             MACH_TYPE_xxx           number
 #
@@ -928,7 +928,7 @@ palmt5			MACH_PALMT5		PALMT5			917
 palmtc                  MACH_PALMTC             PALMTC                  918
 omap_apollon            MACH_OMAP_APOLLON       OMAP_APOLLON            919
 mxc30030evb             MACH_MXC30030EVB        MXC30030EVB             920
-rea_2d                  MACH_REA_2D             REA_2D                  921
+rea_cpu2                MACH_REA_2D             REA_2D                  921
 eti3e524                MACH_TI3E524            TI3E524                 922
 ateb9200                MACH_ATEB9200           ATEB9200                923
 auckland                MACH_AUCKLAND           AUCKLAND                924
@@ -2421,3 +2421,118 @@ liberty			MACH_LIBERTY		LIBERTY			2434
 mh355                   MACH_MH355              MH355                   2435
 pc7802                  MACH_PC7802             PC7802                  2436
 gnet_sgc                MACH_GNET_SGC           GNET_SGC                2437
+einstein15              MACH_EINSTEIN15         EINSTEIN15              2438
+cmpd                    MACH_CMPD               CMPD                    2439
+davinci_hase1           MACH_DAVINCI_HASE1      DAVINCI_HASE1           2440
+lgeincitephone          MACH_LGEINCITEPHONE     LGEINCITEPHONE          2441
+ea313x                  MACH_EA313X             EA313X                  2442
+fwbd_39064              MACH_FWBD_39064         FWBD_39064              2443
+fwbd_390128             MACH_FWBD_390128        FWBD_390128             2444
+pelco_moe               MACH_PELCO_MOE          PELCO_MOE               2445
+minimix27               MACH_MINIMIX27          MINIMIX27               2446
+omap3_thunder           MACH_OMAP3_THUNDER      OMAP3_THUNDER           2447
+passionc                MACH_PASSIONC           PASSIONC                2448
+mx27amata               MACH_MX27AMATA          MX27AMATA               2449
+bgat1                   MACH_BGAT1              BGAT1                   2450
+buzz                    MACH_BUZZ               BUZZ                    2451
+mb9g20                  MACH_MB9G20             MB9G20                  2452
+yushan                  MACH_YUSHAN             YUSHAN                  2453
+lizard                  MACH_LIZARD             LIZARD                  2454
+omap3polycom            MACH_OMAP3POLYCOM       OMAP3POLYCOM            2455
+smdkv210                MACH_SMDKV210           SMDKV210                2456
+bravo                   MACH_BRAVO              BRAVO                   2457
+siogentoo1              MACH_SIOGENTOO1         SIOGENTOO1              2458
+siogentoo2              MACH_SIOGENTOO2         SIOGENTOO2              2459
+sm3k                    MACH_SM3K               SM3K                    2460
+acer_tempo_f900         MACH_ACER_TEMPO_F900    ACER_TEMPO_F900         2461
+sst61vc010_dev          MACH_SST61VC010_DEV     SST61VC010_DEV          2462
+glittertind             MACH_GLITTERTIND        GLITTERTIND             2463
+omap_zoom3              MACH_OMAP_ZOOM3         OMAP_ZOOM3              2464
+omap_3630sdp            MACH_OMAP_3630SDP       OMAP_3630SDP            2465
+cybook2440              MACH_CYBOOK2440         CYBOOK2440              2466
+torino_s                MACH_TORINO_S           TORINO_S                2467
+havana                  MACH_HAVANA             HAVANA                  2468
+beaumont_11             MACH_BEAUMONT_11        BEAUMONT_11             2469
+vanguard                MACH_VANGUARD           VANGUARD                2470
+s5pc110_draco           MACH_S5PC110_DRACO      S5PC110_DRACO           2471
+cartesio_two            MACH_CARTESIO_TWO       CARTESIO_TWO            2472
+aster                   MACH_ASTER              ASTER                   2473
+voguesv210              MACH_VOGUESV210         VOGUESV210              2474
+acm500x                 MACH_ACM500X            ACM500X                 2475
+km9260                  MACH_KM9260             KM9260                  2476
+nideflexg1              MACH_NIDEFLEXG1         NIDEFLEXG1              2477
+ctera_plug_io           MACH_CTERA_PLUG_IO      CTERA_PLUG_IO           2478
+smartq7                 MACH_SMARTQ7            SMARTQ7                 2479
+at91sam9g10ek2          MACH_AT91SAM9G10EK2     AT91SAM9G10EK2          2480
+asusp527                MACH_ASUSP527           ASUSP527                2481
+at91sam9g20mpm2         MACH_AT91SAM9G20MPM2    AT91SAM9G20MPM2         2482
+topasa900               MACH_TOPASA900          TOPASA900               2483
+electrum_100            MACH_ELECTRUM_100       ELECTRUM_100            2484
+mx51grb                 MACH_MX51GRB            MX51GRB                 2485
+xea300                  MACH_XEA300             XEA300                  2486
+htcstartrek             MACH_HTCSTARTREK        HTCSTARTREK             2487
+lima                    MACH_LIMA               LIMA                    2488
+csb740                  MACH_CSB740             CSB740                  2489
+usb_s8815               MACH_USB_S8815          USB_S8815               2490
+watson_efm_plugin       MACH_WATSON_EFM_PLUGIN  WATSON_EFM_PLUGIN       2491
+milkyway                MACH_MILKYWAY           MILKYWAY                2492
+g4evm                   MACH_G4EVM              G4EVM                   2493
+picomod6                MACH_PICOMOD6           PICOMOD6                2494
+omapl138_hawkboard      MACH_OMAPL138_HAWKBOARD OMAPL138_HAWKBOARD      2495
+ip6000                  MACH_IP6000             IP6000                  2496
+ip6010                  MACH_IP6010             IP6010                  2497
+utm400                  MACH_UTM400             UTM400                  2498
+omap3_zybex             MACH_OMAP3_ZYBEX        OMAP3_ZYBEX             2499
+wireless_space          MACH_WIRELESS_SPACE     WIRELESS_SPACE          2500
+sx560                   MACH_SX560              SX560                   2501
+ts41x                   MACH_TS41X              TS41X                   2502
+elphel10373             MACH_ELPHEL10373        ELPHEL10373             2503
+rhobot                  MACH_RHOBOT             RHOBOT                  2504
+mx51_refresh            MACH_MX51_REFRESH       MX51_REFRESH            2505
+ls9260                  MACH_LS9260             LS9260                  2506
+shank                   MACH_SHANK              SHANK                   2507
+qsd8x50_st1             MACH_QSD8X50_ST1        QSD8X50_ST1             2508
+at91sam9m10ekes         MACH_AT91SAM9M10EKES    AT91SAM9M10EKES         2509
+hiram                   MACH_HIRAM              HIRAM                   2510
+phy3250                 MACH_PHY3250            PHY3250                 2511
+ea3250                  MACH_EA3250             EA3250                  2512
+fdi3250                 MACH_FDI3250            FDI3250                 2513
+whitestone              MACH_WHITESTONE         WHITESTONE              2514
+at91sam9263nit          MACH_AT91SAM9263NIT     AT91SAM9263NIT          2515
+ccmx51                  MACH_CCMX51             CCMX51                  2516
+ccmx51js                MACH_CCMX51JS           CCMX51JS                2517
+ccwmx51                 MACH_CCWMX51            CCWMX51                 2518
+ccwmx51js               MACH_CCWMX51JS          CCWMX51JS               2519
+mini6410                MACH_MINI6410           MINI6410                2520
+tiny6410                MACH_TINY6410           TINY6410                2521
+nano6410                MACH_NANO6410           NANO6410                2522
+at572d940hfnldb         MACH_AT572D940HFNLDB    AT572D940HFNLDB         2523
+htcleo                  MACH_HTCLEO             HTCLEO                  2524
+avp13                   MACH_AVP13              AVP13                   2525
+xxsvideod               MACH_XXSVIDEOD          XXSVIDEOD               2526
+vpnext                  MACH_VPNEXT             VPNEXT                  2527
+swarco_itc3             MACH_SWARCO_ITC3        SWARCO_ITC3             2528
+tx51                    MACH_TX51               TX51                    2529
+dolby_cat1021           MACH_DOLBY_CAT1021      DOLBY_CAT1021           2530
+mx28evk                 MACH_MX28EVK            MX28EVK                 2531
+phoenix260              MACH_PHOENIX260         PHOENIX260              2532
+uvaca_stork             MACH_UVACA_STORK        UVACA_STORK             2533
+smartq5                 MACH_SMARTQ5            SMARTQ5                 2534
+all3078                 MACH_ALL3078            ALL3078                 2535
+ctera_2bay_ds           MACH_CTERA_2BAY_DS      CTERA_2BAY_DS           2536
+siogentoo3              MACH_SIOGENTOO3         SIOGENTOO3              2537
+epb5000                 MACH_EPB5000            EPB5000                 2538
+hy9263                  MACH_HY9263             HY9263                  2539
+acer_tempo_m900         MACH_ACER_TEMPO_M900    ACER_TEMPO_M900         2540
+acer_tempo_dx650        MACH_ACER_TEMPO_DX900   ACER_TEMPO_DX900        2541
+acer_tempo_x960         MACH_ACER_TEMPO_X960    ACER_TEMPO_X960         2542
+acer_eten_v900          MACH_ACER_ETEN_V900     ACER_ETEN_V900          2543
+acer_eten_x900          MACH_ACER_ETEN_X900     ACER_ETEN_X900          2544
+bonnell                 MACH_BONNELL            BONNELL                 2545
+oht_mx27                MACH_OHT_MX27           OHT_MX27                2546
+htcquartz               MACH_HTCQUARTZ          HTCQUARTZ               2547
+davinci_dm6467tevm      MACH_DAVINCI_DM6467TEVM DAVINCI_DM6467TEVM      2548
+c3ax03                  MACH_C3AX03             C3AX03                  2549
+mxt_td60                MACH_MXT_TD60           MXT_TD60                2550
+esyx                    MACH_ESYX               ESYX                    2551
+bulldog                 MACH_BULLDOG            BULLDOG                 2553