aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm')
-rw-r--r--arch/arm/mach-s3c2442/Kconfig12
-rw-r--r--arch/arm/mach-s3c2442/Makefile2
-rw-r--r--arch/arm/mach-s3c2442/include/mach/gta02.h84
-rw-r--r--arch/arm/mach-s3c2442/mach-gta02.c646
4 files changed, 744 insertions, 0 deletions
diff --git a/arch/arm/mach-s3c2442/Kconfig b/arch/arm/mach-s3c2442/Kconfig
index b289d198020e..103e913f2258 100644
--- a/arch/arm/mach-s3c2442/Kconfig
+++ b/arch/arm/mach-s3c2442/Kconfig
@@ -24,6 +24,18 @@ config SMDK2440_CPU2442
24 depends on ARCH_S3C2440 24 depends on ARCH_S3C2440
25 select CPU_S3C2442 25 select CPU_S3C2442
26 26
27config MACH_NEO1973_GTA02
28 bool "Openmoko GTA02 / Freerunner phone"
29 select CPU_S3C2442
30 select MFD_PCF50633
31 select PCF50633_GPIO
32 select I2C
33 select POWER_SUPPLY
34 select MACH_NEO1973
35 select S3C2410_PWM
36 help
37 Say Y here if you are using the Openmoko GTA02 / Freerunner GSM Phone
38
27 39
28endmenu 40endmenu
29 41
diff --git a/arch/arm/mach-s3c2442/Makefile b/arch/arm/mach-s3c2442/Makefile
index 2a909c6c5798..2a19113a5769 100644
--- a/arch/arm/mach-s3c2442/Makefile
+++ b/arch/arm/mach-s3c2442/Makefile
@@ -12,5 +12,7 @@ obj- :=
12obj-$(CONFIG_CPU_S3C2442) += s3c2442.o 12obj-$(CONFIG_CPU_S3C2442) += s3c2442.o
13obj-$(CONFIG_CPU_S3C2442) += clock.o 13obj-$(CONFIG_CPU_S3C2442) += clock.o
14 14
15obj-$(CONFIG_MACH_NEO1973_GTA02) += mach-gta02.o
16
15# Machine support 17# Machine support
16 18
diff --git a/arch/arm/mach-s3c2442/include/mach/gta02.h b/arch/arm/mach-s3c2442/include/mach/gta02.h
new file mode 100644
index 000000000000..953331d8d56a
--- /dev/null
+++ b/arch/arm/mach-s3c2442/include/mach/gta02.h
@@ -0,0 +1,84 @@
1#ifndef _GTA02_H
2#define _GTA02_H
3
4#include <mach/regs-gpio.h>
5
6/* Different hardware revisions, passed in ATAG_REVISION by u-boot */
7#define GTA02v1_SYSTEM_REV 0x00000310
8#define GTA02v2_SYSTEM_REV 0x00000320
9#define GTA02v3_SYSTEM_REV 0x00000330
10#define GTA02v4_SYSTEM_REV 0x00000340
11#define GTA02v5_SYSTEM_REV 0x00000350
12/* since A7 is basically same as A6, we use A6 PCB ID */
13#define GTA02v6_SYSTEM_REV 0x00000360
14
15#define GTA02_GPIO_n3DL_GSM S3C2410_GPA(13) /* v1 + v2 + v3 only */
16
17#define GTA02_GPIO_PWR_LED1 S3C2410_GPB(0)
18#define GTA02_GPIO_PWR_LED2 S3C2410_GPB(1)
19#define GTA02_GPIO_AUX_LED S3C2410_GPB(2)
20#define GTA02_GPIO_VIBRATOR_ON S3C2410_GPB(3)
21#define GTA02_GPIO_MODEM_RST S3C2410_GPB(5)
22#define GTA02_GPIO_BT_EN S3C2410_GPB(6)
23#define GTA02_GPIO_MODEM_ON S3C2410_GPB(7)
24#define GTA02_GPIO_EXTINT8 S3C2410_GPB(8)
25#define GTA02_GPIO_USB_PULLUP S3C2410_GPB(9)
26
27#define GTA02_GPIO_PIO5 S3C2410_GPC(5) /* v3 + v4 only */
28
29#define GTA02v3_GPIO_nG1_CS S3C2410_GPD(12) /* v3 + v4 only */
30#define GTA02v3_GPIO_nG2_CS S3C2410_GPD(13) /* v3 + v4 only */
31#define GTA02v5_GPIO_HDQ S3C2410_GPD(14) /* v5 + */
32
33#define GTA02_GPIO_nG1_INT S3C2410_GPF(0)
34#define GTA02_GPIO_IO1 S3C2410_GPF(1)
35#define GTA02_GPIO_PIO_2 S3C2410_GPF(2) /* v2 + v3 + v4 only */
36#define GTA02_GPIO_JACK_INSERT S3C2410_GPF(4)
37#define GTA02_GPIO_WLAN_GPIO1 S3C2410_GPF(5) /* v2 + v3 + v4 only */
38#define GTA02_GPIO_AUX_KEY S3C2410_GPF(6)
39#define GTA02_GPIO_HOLD_KEY S3C2410_GPF(7)
40
41#define GTA02_GPIO_3D_IRQ S3C2410_GPG(4)
42#define GTA02v2_GPIO_nG2_INT S3C2410_GPG(8) /* v2 + v3 + v4 only */
43#define GTA02v3_GPIO_nUSB_OC S3C2410_GPG(9) /* v3 + v4 only */
44#define GTA02v3_GPIO_nUSB_FLT S3C2410_GPG(10) /* v3 + v4 only */
45#define GTA02v3_GPIO_nGSM_OC S3C2410_GPG(11) /* v3 + v4 only */
46
47#define GTA02_GPIO_AMP_SHUT S3C2440_GPJ1 /* v2 + v3 + v4 only */
48#define GTA02v1_GPIO_WLAN_GPIO10 S3C2440_GPJ2
49#define GTA02_GPIO_HP_IN S3C2440_GPJ2 /* v2 + v3 + v4 only */
50#define GTA02_GPIO_INT0 S3C2440_GPJ3 /* v2 + v3 + v4 only */
51#define GTA02_GPIO_nGSM_EN S3C2440_GPJ4
52#define GTA02_GPIO_3D_RESET S3C2440_GPJ5
53#define GTA02_GPIO_nDL_GSM S3C2440_GPJ6 /* v4 + v5 only */
54#define GTA02_GPIO_WLAN_GPIO0 S3C2440_GPJ7
55#define GTA02v1_GPIO_BAT_ID S3C2440_GPJ8
56#define GTA02_GPIO_KEEPACT S3C2440_GPJ8
57#define GTA02v1_GPIO_HP_IN S3C2440_GPJ10
58#define GTA02_CHIP_PWD S3C2440_GPJ11 /* v2 + v3 + v4 only */
59#define GTA02_GPIO_nWLAN_RESET S3C2440_GPJ12 /* v2 + v3 + v4 only */
60
61#define GTA02_IRQ_GSENSOR_1 IRQ_EINT0
62#define GTA02_IRQ_MODEM IRQ_EINT1
63#define GTA02_IRQ_PIO_2 IRQ_EINT2 /* v2 + v3 + v4 only */
64#define GTA02_IRQ_nJACK_INSERT IRQ_EINT4
65#define GTA02_IRQ_WLAN_GPIO1 IRQ_EINT5
66#define GTA02_IRQ_AUX IRQ_EINT6
67#define GTA02_IRQ_nHOLD IRQ_EINT7
68#define GTA02_IRQ_PCF50633 IRQ_EINT9
69#define GTA02_IRQ_3D IRQ_EINT12
70#define GTA02_IRQ_GSENSOR_2 IRQ_EINT16 /* v2 + v3 + v4 only */
71#define GTA02v3_IRQ_nUSB_OC IRQ_EINT17 /* v3 + v4 only */
72#define GTA02v3_IRQ_nUSB_FLT IRQ_EINT18 /* v3 + v4 only */
73#define GTA02v3_IRQ_nGSM_OC IRQ_EINT19 /* v3 + v4 only */
74
75/* returns 00 000 on GTA02 A5 and earlier, A6 returns 01 001 */
76#define GTA02_PCB_ID1_0 S3C2410_GPC(13)
77#define GTA02_PCB_ID1_1 S3C2410_GPC(15)
78#define GTA02_PCB_ID1_2 S3C2410_GPD(0)
79#define GTA02_PCB_ID2_0 S3C2410_GPD(3)
80#define GTA02_PCB_ID2_1 S3C2410_GPD(4)
81
82int gta02_get_pcb_revision(void);
83
84#endif /* _GTA02_H */
diff --git a/arch/arm/mach-s3c2442/mach-gta02.c b/arch/arm/mach-s3c2442/mach-gta02.c
new file mode 100644
index 000000000000..e23b581aa0e1
--- /dev/null
+++ b/arch/arm/mach-s3c2442/mach-gta02.c
@@ -0,0 +1,646 @@
1/*
2 * linux/arch/arm/mach-s3c2442/mach-gta02.c
3 *
4 * S3C2442 Machine Support for Openmoko GTA02 / FreeRunner.
5 *
6 * Copyright (C) 2006-2009 by Openmoko, Inc.
7 * Authors: Harald Welte <laforge@openmoko.org>
8 * Andy Green <andy@openmoko.org>
9 * Werner Almesberger <werner@openmoko.org>
10 * All rights reserved.
11 *
12 * This program is free software; you can redistribute it and/or
13 * modify it under the terms of the GNU General Public License as
14 * published by the Free Software Foundation; either version 2 of
15 * the License, or (at your option) any later version.
16 *
17 * This program is distributed in the hope that it will be useful,
18 * but WITHOUT ANY WARRANTY; without even the implied warranty of
19 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
20 * GNU General Public License for more details.
21 *
22 * You should have received a copy of the GNU General Public License
23 * along with this program; if not, write to the Free Software
24 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
25 * MA 02111-1307 USA
26 *
27 */
28
29#include <linux/kernel.h>
30#include <linux/types.h>
31#include <linux/interrupt.h>
32#include <linux/list.h>
33#include <linux/delay.h>
34#include <linux/timer.h>
35#include <linux/init.h>
36#include <linux/gpio.h>
37#include <linux/workqueue.h>
38#include <linux/platform_device.h>
39#include <linux/serial_core.h>
40#include <linux/spi/spi.h>
41
42#include <linux/mmc/host.h>
43
44#include <linux/mtd/mtd.h>
45#include <linux/mtd/nand.h>
46#include <linux/mtd/nand_ecc.h>
47#include <linux/mtd/partitions.h>
48#include <linux/mtd/physmap.h>
49#include <linux/io.h>
50
51#include <linux/i2c.h>
52#include <linux/backlight.h>
53#include <linux/regulator/machine.h>
54
55#include <linux/mfd/pcf50633/core.h>
56#include <linux/mfd/pcf50633/mbc.h>
57#include <linux/mfd/pcf50633/adc.h>
58#include <linux/mfd/pcf50633/gpio.h>
59#include <linux/mfd/pcf50633/pmic.h>
60
61#include <asm/mach/arch.h>
62#include <asm/mach/map.h>
63#include <asm/mach/irq.h>
64
65#include <asm/irq.h>
66#include <asm/mach-types.h>
67
68#include <mach/regs-irq.h>
69#include <mach/regs-gpio.h>
70#include <mach/regs-gpioj.h>
71#include <mach/fb.h>
72
73#include <mach/spi.h>
74#include <mach/spi-gpio.h>
75#include <plat/usb-control.h>
76#include <mach/regs-mem.h>
77#include <mach/hardware.h>
78
79#include <mach/gta02.h>
80
81#include <plat/regs-serial.h>
82#include <plat/nand.h>
83#include <plat/devs.h>
84#include <plat/cpu.h>
85#include <plat/pm.h>
86#include <plat/udc.h>
87#include <plat/gpio-cfg.h>
88#include <plat/iic.h>
89
90static struct pcf50633 *gta02_pcf;
91
92/*
93 * This gets called every 1ms when we paniced.
94 */
95
96static long gta02_panic_blink(long count)
97{
98 long delay = 0;
99 static long last_blink;
100 static char led;
101
102 /* Fast blink: 200ms period. */
103 if (count - last_blink < 100)
104 return 0;
105
106 led ^= 1;
107 gpio_direction_output(GTA02_GPIO_AUX_LED, led);
108
109 last_blink = count;
110
111 return delay;
112}
113
114
115static struct map_desc gta02_iodesc[] __initdata = {
116 {
117 .virtual = 0xe0000000,
118 .pfn = __phys_to_pfn(S3C2410_CS3 + 0x01000000),
119 .length = SZ_1M,
120 .type = MT_DEVICE
121 },
122};
123
124#define UCON (S3C2410_UCON_DEFAULT | S3C2443_UCON_RXERR_IRQEN)
125#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
126#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
127
128static struct s3c2410_uartcfg gta02_uartcfgs[] = {
129 [0] = {
130 .hwport = 0,
131 .flags = 0,
132 .ucon = UCON,
133 .ulcon = ULCON,
134 .ufcon = UFCON,
135 },
136 [1] = {
137 .hwport = 1,
138 .flags = 0,
139 .ucon = UCON,
140 .ulcon = ULCON,
141 .ufcon = UFCON,
142 },
143 [2] = {
144 .hwport = 2,
145 .flags = 0,
146 .ucon = UCON,
147 .ulcon = ULCON,
148 .ufcon = UFCON,
149 },
150};
151
152#ifdef CONFIG_CHARGER_PCF50633
153/*
154 * On GTA02 the 1A charger features a 48K resistor to 0V on the ID pin.
155 * We use this to recognize that we can pull 1A from the USB socket.
156 *
157 * These constants are the measured pcf50633 ADC levels with the 1A
158 * charger / 48K resistor, and with no pulldown resistor.
159 */
160
161#define ADC_NOM_CHG_DETECT_1A 6
162#define ADC_NOM_CHG_DETECT_USB 43
163
164static void
165gta02_configure_pmu_for_charger(struct pcf50633 *pcf, void *unused, int res)
166{
167 int ma;
168
169 /* Interpret charger type */
170 if (res < ((ADC_NOM_CHG_DETECT_USB + ADC_NOM_CHG_DETECT_1A) / 2)) {
171
172 /*
173 * Sanity - stop GPO driving out now that we have a 1A charger
174 * GPO controls USB Host power generation on GTA02
175 */
176 pcf50633_gpio_set(pcf, PCF50633_GPO, 0);
177
178 ma = 1000;
179 } else
180 ma = 100;
181
182 pcf50633_mbc_usb_curlim_set(pcf, ma);
183}
184
185static struct delayed_work gta02_charger_work;
186static int gta02_usb_vbus_draw;
187
188static void gta02_charger_worker(struct work_struct *work)
189{
190 if (gta02_usb_vbus_draw) {
191 pcf50633_mbc_usb_curlim_set(gta02_pcf, gta02_usb_vbus_draw);
192 return;
193 }
194
195#ifdef CONFIG_PCF50633_ADC
196 pcf50633_adc_async_read(gta02_pcf,
197 PCF50633_ADCC1_MUX_ADCIN1,
198 PCF50633_ADCC1_AVERAGE_16,
199 gta02_configure_pmu_for_charger,
200 NULL);
201#else
202 /*
203 * If the PCF50633 ADC is disabled we fallback to a
204 * 100mA limit for safety.
205 */
206 pcf50633_mbc_usb_curlim_set(pcf, 100);
207#endif
208}
209
210#define GTA02_CHARGER_CONFIGURE_TIMEOUT ((3000 * HZ) / 1000)
211
212static void gta02_pmu_event_callback(struct pcf50633 *pcf, int irq)
213{
214 if (irq == PCF50633_IRQ_USBINS) {
215 schedule_delayed_work(&gta02_charger_work,
216 GTA02_CHARGER_CONFIGURE_TIMEOUT);
217
218 return;
219 }
220
221 if (irq == PCF50633_IRQ_USBREM) {
222 cancel_delayed_work_sync(&gta02_charger_work);
223 gta02_usb_vbus_draw = 0;
224 }
225}
226
227static void gta02_udc_vbus_draw(unsigned int ma)
228{
229 if (!gta02_pcf)
230 return;
231
232 gta02_usb_vbus_draw = ma;
233
234 schedule_delayed_work(&gta02_charger_work,
235 GTA02_CHARGER_CONFIGURE_TIMEOUT);
236}
237#else /* !CONFIG_CHARGER_PCF50633 */
238#define gta02_pmu_event_callback NULL
239#define gta02_udc_vbus_draw NULL
240#endif
241
242/*
243 * This is called when pc50633 is probed, unfortunately quite late in the
244 * day since it is an I2C bus device. Here we can belatedly define some
245 * platform devices with the advantage that we can mark the pcf50633 as the
246 * parent. This makes them get suspended and resumed with their parent
247 * the pcf50633 still around.
248 */
249
250static void gta02_pmu_attach_child_devices(struct pcf50633 *pcf);
251
252
253static char *gta02_batteries[] = {
254 "battery",
255};
256
257struct pcf50633_platform_data gta02_pcf_pdata = {
258 .resumers = {
259 [0] = PCF50633_INT1_USBINS |
260 PCF50633_INT1_USBREM |
261 PCF50633_INT1_ALARM,
262 [1] = PCF50633_INT2_ONKEYF,
263 [2] = PCF50633_INT3_ONKEY1S,
264 [3] = PCF50633_INT4_LOWSYS |
265 PCF50633_INT4_LOWBAT |
266 PCF50633_INT4_HIGHTMP,
267 },
268
269 .batteries = gta02_batteries,
270 .num_batteries = ARRAY_SIZE(gta02_batteries),
271 .reg_init_data = {
272 [PCF50633_REGULATOR_AUTO] = {
273 .constraints = {
274 .min_uV = 3300000,
275 .max_uV = 3300000,
276 .valid_modes_mask = REGULATOR_MODE_NORMAL,
277 .always_on = 1,
278 .apply_uV = 1,
279 .state_mem = {
280 .enabled = 1,
281 },
282 },
283 },
284 [PCF50633_REGULATOR_DOWN1] = {
285 .constraints = {
286 .min_uV = 1300000,
287 .max_uV = 1600000,
288 .valid_modes_mask = REGULATOR_MODE_NORMAL,
289 .always_on = 1,
290 .apply_uV = 1,
291 },
292 },
293 [PCF50633_REGULATOR_DOWN2] = {
294 .constraints = {
295 .min_uV = 1800000,
296 .max_uV = 1800000,
297 .valid_modes_mask = REGULATOR_MODE_NORMAL,
298 .apply_uV = 1,
299 .always_on = 1,
300 .state_mem = {
301 .enabled = 1,
302 },
303 },
304 },
305 [PCF50633_REGULATOR_HCLDO] = {
306 .constraints = {
307 .min_uV = 2000000,
308 .max_uV = 3300000,
309 .valid_modes_mask = REGULATOR_MODE_NORMAL,
310 .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
311 .always_on = 1,
312 },
313 },
314 [PCF50633_REGULATOR_LDO1] = {
315 .constraints = {
316 .min_uV = 3300000,
317 .max_uV = 3300000,
318 .valid_modes_mask = REGULATOR_MODE_NORMAL,
319 .apply_uV = 1,
320 .state_mem = {
321 .enabled = 0,
322 },
323 },
324 },
325 [PCF50633_REGULATOR_LDO2] = {
326 .constraints = {
327 .min_uV = 3300000,
328 .max_uV = 3300000,
329 .valid_modes_mask = REGULATOR_MODE_NORMAL,
330 .apply_uV = 1,
331 },
332 },
333 [PCF50633_REGULATOR_LDO3] = {
334 .constraints = {
335 .min_uV = 3000000,
336 .max_uV = 3000000,
337 .valid_modes_mask = REGULATOR_MODE_NORMAL,
338 .apply_uV = 1,
339 },
340 },
341 [PCF50633_REGULATOR_LDO4] = {
342 .constraints = {
343 .min_uV = 3200000,
344 .max_uV = 3200000,
345 .valid_modes_mask = REGULATOR_MODE_NORMAL,
346 .apply_uV = 1,
347 },
348 },
349 [PCF50633_REGULATOR_LDO5] = {
350 .constraints = {
351 .min_uV = 3000000,
352 .max_uV = 3000000,
353 .valid_modes_mask = REGULATOR_MODE_NORMAL,
354 .apply_uV = 1,
355 .state_mem = {
356 .enabled = 1,
357 },
358 },
359 },
360 [PCF50633_REGULATOR_LDO6] = {
361 .constraints = {
362 .min_uV = 3000000,
363 .max_uV = 3000000,
364 .valid_modes_mask = REGULATOR_MODE_NORMAL,
365 },
366 },
367 [PCF50633_REGULATOR_MEMLDO] = {
368 .constraints = {
369 .min_uV = 1800000,
370 .max_uV = 1800000,
371 .valid_modes_mask = REGULATOR_MODE_NORMAL,
372 .state_mem = {
373 .enabled = 1,
374 },
375 },
376 },
377
378 },
379 .probe_done = gta02_pmu_attach_child_devices,
380 .mbc_event_callback = gta02_pmu_event_callback,
381};
382
383
384/* NOR Flash. */
385
386#define GTA02_FLASH_BASE 0x18000000 /* GCS3 */
387#define GTA02_FLASH_SIZE 0x200000 /* 2MBytes */
388
389static struct physmap_flash_data gta02_nor_flash_data = {
390 .width = 2,
391};
392
393static struct resource gta02_nor_flash_resource = {
394 .start = GTA02_FLASH_BASE,
395 .end = GTA02_FLASH_BASE + GTA02_FLASH_SIZE - 1,
396 .flags = IORESOURCE_MEM,
397};
398
399static struct platform_device gta02_nor_flash = {
400 .name = "physmap-flash",
401 .id = 0,
402 .dev = {
403 .platform_data = &gta02_nor_flash_data,
404 },
405 .resource = &gta02_nor_flash_resource,
406 .num_resources = 1,
407};
408
409
410struct platform_device s3c24xx_pwm_device = {
411 .name = "s3c24xx_pwm",
412 .num_resources = 0,
413};
414
415static struct i2c_board_info gta02_i2c_devs[] __initdata = {
416 {
417 I2C_BOARD_INFO("pcf50633", 0x73),
418 .irq = GTA02_IRQ_PCF50633,
419 .platform_data = &gta02_pcf_pdata,
420 },
421 {
422 I2C_BOARD_INFO("wm8753", 0x1a),
423 },
424};
425
426static struct s3c2410_nand_set gta02_nand_sets[] = {
427 [0] = {
428 /*
429 * This name is also hard-coded in the boot loaders, so
430 * changing it would would require all users to upgrade
431 * their boot loaders, some of which are stored in a NOR
432 * that is considered to be immutable.
433 */
434 .name = "neo1973-nand",
435 .nr_chips = 1,
436 .use_bbt = 1,
437 .force_soft_ecc = 1,
438 },
439};
440
441/*
442 * Choose a set of timings derived from S3C@2442B MCP54
443 * data sheet (K5D2G13ACM-D075 MCP Memory).
444 */
445
446static struct s3c2410_platform_nand gta02_nand_info = {
447 .tacls = 0,
448 .twrph0 = 25,
449 .twrph1 = 15,
450 .nr_sets = ARRAY_SIZE(gta02_nand_sets),
451 .sets = gta02_nand_sets,
452};
453
454
455static void gta02_udc_command(enum s3c2410_udc_cmd_e cmd)
456{
457 switch (cmd) {
458 case S3C2410_UDC_P_ENABLE:
459 pr_debug("%s S3C2410_UDC_P_ENABLE\n", __func__);
460 gpio_direction_output(GTA02_GPIO_USB_PULLUP, 1);
461 break;
462 case S3C2410_UDC_P_DISABLE:
463 pr_debug("%s S3C2410_UDC_P_DISABLE\n", __func__);
464 gpio_direction_output(GTA02_GPIO_USB_PULLUP, 0);
465 break;
466 case S3C2410_UDC_P_RESET:
467 pr_debug("%s S3C2410_UDC_P_RESET\n", __func__);
468 /* FIXME: Do something here. */
469 }
470}
471
472/* Get PMU to set USB current limit accordingly. */
473static struct s3c2410_udc_mach_info gta02_udc_cfg = {
474 .vbus_draw = gta02_udc_vbus_draw,
475 .udc_command = gta02_udc_command,
476
477};
478
479
480
481static void gta02_bl_set_intensity(int intensity)
482{
483 struct pcf50633 *pcf = gta02_pcf;
484 int old_intensity = pcf50633_reg_read(pcf, PCF50633_REG_LEDOUT);
485
486 /* We map 8-bit intensity to 6-bit intensity in hardware. */
487 intensity >>= 2;
488
489 /*
490 * This can happen during, eg, print of panic on blanked console,
491 * but we can't service i2c without interrupts active, so abort.
492 */
493 if (in_atomic()) {
494 printk(KERN_ERR "gta02_bl_set_intensity called while atomic\n");
495 return;
496 }
497
498 old_intensity = pcf50633_reg_read(pcf, PCF50633_REG_LEDOUT);
499 if (intensity == old_intensity)
500 return;
501
502 /* We can't do this anywhere else. */
503 pcf50633_reg_write(pcf, PCF50633_REG_LEDDIM, 5);
504
505 if (!(pcf50633_reg_read(pcf, PCF50633_REG_LEDENA) & 3))
506 old_intensity = 0;
507
508 /*
509 * The PCF50633 cannot handle LEDOUT = 0 (datasheet p60)
510 * if seen, you have to re-enable the LED unit.
511 */
512 if (!intensity || !old_intensity)
513 pcf50633_reg_write(pcf, PCF50633_REG_LEDENA, 0);
514
515 /* Illegal to set LEDOUT to 0. */
516 if (!intensity)
517 pcf50633_reg_set_bit_mask(pcf, PCF50633_REG_LEDOUT, 0x3f, 2);
518 else
519 pcf50633_reg_set_bit_mask(pcf, PCF50633_REG_LEDOUT, 0x3f,
520 intensity);
521
522 if (intensity)
523 pcf50633_reg_write(pcf, PCF50633_REG_LEDENA, 2);
524
525}
526
527static struct generic_bl_info gta02_bl_info = {
528 .name = "gta02-bl",
529 .max_intensity = 0xff,
530 .default_intensity = 0xff,
531 .set_bl_intensity = gta02_bl_set_intensity,
532};
533
534static struct platform_device gta02_bl_dev = {
535 .name = "generic-bl",
536 .id = 1,
537 .dev = {
538 .platform_data = &gta02_bl_info,
539 },
540};
541
542
543
544/* USB */
545static struct s3c2410_hcd_info gta02_usb_info = {
546 .port[0] = {
547 .flags = S3C_HCDFLG_USED,
548 },
549 .port[1] = {
550 .flags = 0,
551 },
552};
553
554
555static void __init gta02_map_io(void)
556{
557 s3c24xx_init_io(gta02_iodesc, ARRAY_SIZE(gta02_iodesc));
558 s3c24xx_init_clocks(12000000);
559 s3c24xx_init_uarts(gta02_uartcfgs, ARRAY_SIZE(gta02_uartcfgs));
560}
561
562
563/* These are the guys that don't need to be children of PMU. */
564
565static struct platform_device *gta02_devices[] __initdata = {
566 &s3c_device_usb,
567 &s3c_device_wdt,
568 &s3c_device_sdi,
569 &s3c_device_usbgadget,
570 &s3c_device_nand,
571 &gta02_nor_flash,
572 &s3c24xx_pwm_device,
573 &s3c_device_iis,
574 &s3c_device_i2c0,
575};
576
577/* These guys DO need to be children of PMU. */
578
579static struct platform_device *gta02_devices_pmu_children[] = {
580 &gta02_bl_dev,
581};
582
583
584/*
585 * This is called when pc50633 is probed, quite late in the day since it is an
586 * I2C bus device. Here we can define platform devices with the advantage that
587 * we can mark the pcf50633 as the parent. This makes them get suspended and
588 * resumed with their parent the pcf50633 still around. All devices whose
589 * operation depends on something from pcf50633 must have this relationship
590 * made explicit like this, or suspend and resume will become an unreliable
591 * hellworld.
592 */
593
594static void gta02_pmu_attach_child_devices(struct pcf50633 *pcf)
595{
596 int n;
597
598 /* Grab a copy of the now probed PMU pointer. */
599 gta02_pcf = pcf;
600
601 for (n = 0; n < ARRAY_SIZE(gta02_devices_pmu_children); n++)
602 gta02_devices_pmu_children[n]->dev.parent = pcf->dev;
603
604 platform_add_devices(gta02_devices_pmu_children,
605 ARRAY_SIZE(gta02_devices_pmu_children));
606}
607
608static void gta02_poweroff(void)
609{
610 pcf50633_reg_set_bit_mask(gta02_pcf, PCF50633_REG_OOCSHDWN, 1, 1);
611}
612
613static void __init gta02_machine_init(void)
614{
615 /* Set the panic callback to make AUX LED blink at ~5Hz. */
616 panic_blink = gta02_panic_blink;
617
618 s3c_pm_init();
619
620#ifdef CONFIG_CHARGER_PCF50633
621 INIT_DELAYED_WORK(&gta02_charger_work, gta02_charger_worker);
622#endif
623
624 s3c_device_usb.dev.platform_data = &gta02_usb_info;
625 s3c_device_nand.dev.platform_data = &gta02_nand_info;
626
627 s3c24xx_udc_set_platdata(&gta02_udc_cfg);
628 s3c_i2c0_set_platdata(NULL);
629
630 i2c_register_board_info(0, gta02_i2c_devs, ARRAY_SIZE(gta02_i2c_devs));
631
632 platform_add_devices(gta02_devices, ARRAY_SIZE(gta02_devices));
633 pm_power_off = gta02_poweroff;
634}
635
636
637MACHINE_START(NEO1973_GTA02, "GTA02")
638 /* Maintainer: Nelson Castillo <arhuaco@freaks-unidos.net> */
639 .phys_io = S3C2410_PA_UART,
640 .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
641 .boot_params = S3C2410_SDRAM_PA + 0x100,
642 .map_io = gta02_map_io,
643 .init_irq = s3c24xx_init_irq,
644 .init_machine = gta02_machine_init,
645 .timer = &s3c24xx_timer,
646MACHINE_END
generated by cgit v1.2.2 (git 2.25.0) at 2024-12-26 07:44:13 -0500