2 files changed, 151 insertions, 0 deletions

diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S
index 4733877296d4..bd4823c74645 100644
--- a/arch/arm/kernel/head.S
+++ b/arch/arm/kernel/head.S
@@ -2,6 +2,8 @@
  *  linux/arch/arm/kernel/head.S
  *
  *  Copyright (C) 1994-2002 Russell King
+ *  Copyright (c) 2003 ARM Limited
+ *  All Rights Reserved
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -165,6 +167,48 @@ __mmap_switched:
         stmia   r6, {r0, r4}                    @ Save control register values
         b       start_kernel
 
+#if defined(CONFIG_SMP)
+        .type   secondary_startup, #function
+ENTRY(secondary_startup)
+        /*
+         * Common entry point for secondary CPUs.
+         *
+         * Ensure that we're in SVC mode, and IRQs are disabled.  Lookup
+         * the processor type - there is no need to check the machine type
+         * as it has already been validated by the primary processor.
+         */
+        msr     cpsr_c, #PSR_F_BIT | PSR_I_BIT | MODE_SVC
+        bl      __lookup_processor_type
+        movs    r10, r5                         @ invalid processor?
+        moveq   r0, #'p'                        @ yes, error 'p'
+        beq     __error
+
+        /*
+         * Use the page tables supplied from  __cpu_up.
+         */
+        adr     r4, __secondary_data
+        ldmia   r4, {r5, r6, r13}               @ address to jump to after
+        sub     r4, r4, r5                      @ mmu has been enabled
+        ldr     r4, [r6, r4]                    @ get secondary_data.pgdir
+        adr     lr, __enable_mmu                @ return address
+        add     pc, r10, #12                    @ initialise processor
+                                                @ (return control reg)
+
+        /*
+         * r6  = &secondary_data
+         */
+ENTRY(__secondary_switched)
+        ldr     sp, [r6, #4]                    @ get secondary_data.stack
+        mov     fp, #0
+        b       secondary_start_kernel
+
+        .type   __secondary_data, %object
+__secondary_data:
+        .long   .
+        .long   secondary_data
+        .long   __secondary_switched
+#endif /* defined(CONFIG_SMP) */
+
 
 
 /*
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index ecc8c3332408..45ed036336e0 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -24,6 +24,9 @@
 #include <asm/atomic.h>
 #include <asm/cacheflush.h>
 #include <asm/cpu.h>
+#include <asm/mmu_context.h>
+#include <asm/pgtable.h>
+#include <asm/pgalloc.h>
 #include <asm/processor.h>
 #include <asm/tlbflush.h>
 #include <asm/ptrace.h>
@@ -37,6 +40,13 @@ cpumask_t cpu_present_mask;
 cpumask_t cpu_online_map;
 
 /*
+ * as from 2.5, kernels no longer have an init_tasks structure
+ * so we need some other way of telling a new secondary core
+ * where to place its SVC stack
+ */
+struct secondary_data secondary_data;
+
+/*
  * structures for inter-processor calls
  * - A collection of single bit ipi messages.
  */
@@ -71,6 +81,8 @@ static DEFINE_SPINLOCK(smp_call_function_lock);
 int __init __cpu_up(unsigned int cpu)
 {
         struct task_struct *idle;
+        pgd_t *pgd;
+        pmd_t *pmd;
         int ret;
 
         /*
@@ -84,9 +96,54 @@ int __init __cpu_up(unsigned int cpu)
         }
 
         /*
+         * Allocate initial page tables to allow the new CPU to
+         * enable the MMU safely.  This essentially means a set
+         * of our "standard" page tables, with the addition of
+         * a 1:1 mapping for the physical address of the kernel.
+         */
+        pgd = pgd_alloc(&init_mm);
+        pmd = pmd_offset(pgd, PHYS_OFFSET);
+        *pmd = __pmd((PHYS_OFFSET & PGDIR_MASK) |
+                     PMD_TYPE_SECT | PMD_SECT_AP_WRITE);
+
+        /*
+         * We need to tell the secondary core where to find
+         * its stack and the page tables.
+         */
+        secondary_data.stack = (void *)idle->thread_info + THREAD_SIZE - 8;
+        secondary_data.pgdir = virt_to_phys(pgd);
+        wmb();
+
+        /*
          * Now bring the CPU into our world.
          */
         ret = boot_secondary(cpu, idle);
+        if (ret == 0) {
+                unsigned long timeout;
+
+                /*
+                 * CPU was successfully started, wait for it
+                 * to come online or time out.
+                 */
+                timeout = jiffies + HZ;
+                while (time_before(jiffies, timeout)) {
+                        if (cpu_online(cpu))
+                                break;
+
+                        udelay(10);
+                        barrier();
+                }
+
+                if (!cpu_online(cpu))
+                        ret = -EIO;
+        }
+
+        secondary_data.stack = 0;
+        secondary_data.pgdir = 0;
+
+        *pmd_offset(pgd, PHYS_OFFSET) = __pmd(0);
+        pgd_free(pgd);
+
         if (ret) {
                 printk(KERN_CRIT "cpu_up: processor %d failed to boot\n", cpu);
                 /*
@@ -98,6 +155,56 @@ int __init __cpu_up(unsigned int cpu)
 }
 
 /*
+ * This is the secondary CPU boot entry.  We're using this CPUs
+ * idle thread stack, but a set of temporary page tables.
+ */
+asmlinkage void __init secondary_start_kernel(void)
+{
+        struct mm_struct *mm = &init_mm;
+        unsigned int cpu = smp_processor_id();
+
+        printk("CPU%u: Booted secondary processor\n", cpu);
+
+        /*
+         * All kernel threads share the same mm context; grab a
+         * reference and switch to it.
+         */
+        atomic_inc(&mm->mm_users);
+        atomic_inc(&mm->mm_count);
+        current->active_mm = mm;
+        cpu_set(cpu, mm->cpu_vm_mask);
+        cpu_switch_mm(mm->pgd, mm);
+        enter_lazy_tlb(mm, current);
+
+        cpu_init();
+
+        /*
+         * Give the platform a chance to do its own initialisation.
+         */
+        platform_secondary_init(cpu);
+
+        /*
+         * Enable local interrupts.
+         */
+        local_irq_enable();
+        local_fiq_enable();
+
+        calibrate_delay();
+
+        smp_store_cpu_info(cpu);
+
+        /*
+         * OK, now it's safe to let the boot CPU continue
+         */
+        cpu_set(cpu, cpu_online_map);
+
+        /*
+         * OK, it's off to the idle thread for us
+         */
+        cpu_idle();
+}
+
+/*
  * Called by both boot and secondaries to move global data into
  * per-processor storage.
  */