6 files changed, 158 insertions, 4 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index c8d94dcd8ef7..620f2ca94ed2 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -361,6 +361,11 @@ config NO_IDLE_HZ
           Alternatively, if you want dynamic tick automatically enabled
           during boot, pass "dyntick=enable" via the kernel command string.
 
+          Please note that dynamic tick may affect the accuracy of
+          timekeeping on some platforms depending on the implementation.
+          Currently at least OMAP platform is known to have accurate
+          timekeeping with dynamic tick.
+
 config ARCH_DISCONTIGMEM_ENABLE
         bool
         default (ARCH_LH7A40X && !LH7A40X_CONTIGMEM)
diff --git a/arch/arm/mach-s3c2410/irq.c b/arch/arm/mach-s3c2410/irq.c
index b668c48f4399..cf9f46d88061 100644
--- a/arch/arm/mach-s3c2410/irq.c
+++ b/arch/arm/mach-s3c2410/irq.c
@@ -40,8 +40,11 @@
  *   04-Nov-2004  Ben Dooks
  *                Fix standard IRQ wake for EINT0..4 and RTC
  *
- *   22-Feb-2004  Ben Dooks
+ *   22-Feb-2005  Ben Dooks
  *                Fixed edge-triggering on ADC IRQ
+ *
+ *   28-Jun-2005  Ben Dooks
+ *                Mark IRQ_LCD valid
 */
 
 #include <linux/init.h>
@@ -366,7 +369,6 @@ static struct irqchip s3c_irq_eint0t4 = {
 #define INTMSK_UART1     (1UL << (IRQ_UART1 - IRQ_EINT0))
 #define INTMSK_UART2     (1UL << (IRQ_UART2 - IRQ_EINT0))
 #define INTMSK_ADCPARENT (1UL << (IRQ_ADCPARENT - IRQ_EINT0))
-#define INTMSK_LCD       (1UL << (IRQ_LCD - IRQ_EINT0))
 
 static inline void
 s3c_irqsub_mask(unsigned int irqno, unsigned int parentbit,
@@ -716,7 +718,6 @@ void __init s3c24xx_init_irq(void)
                 case IRQ_UART0:
                 case IRQ_UART1:
                 case IRQ_UART2:
-                case IRQ_LCD:
                 case IRQ_ADCPARENT:
                         set_irq_chip(irqno, &s3c_irq_level_chip);
                         set_irq_handler(irqno, do_level_IRQ);
diff --git a/arch/arm/oprofile/Makefile b/arch/arm/oprofile/Makefile
index ba1a6e9f2b28..8ffb523e6c77 100644
--- a/arch/arm/oprofile/Makefile
+++ b/arch/arm/oprofile/Makefile
@@ -6,6 +6,6 @@ DRIVER_OBJS = $(addprefix ../../../drivers/oprofile/, \
                 oprofilefs.o oprofile_stats.o \
                 timer_int.o )
 
-oprofile-y                              := $(DRIVER_OBJS) init.o
+oprofile-y                              := $(DRIVER_OBJS) init.o backtrace.o
 oprofile-$(CONFIG_CPU_XSCALE)           += common.o op_model_xscale.o
 
diff --git a/arch/arm/oprofile/backtrace.c b/arch/arm/oprofile/backtrace.c
new file mode 100644
index 000000000000..ec58d3e2eb8b
--- /dev/null
+++ b/arch/arm/oprofile/backtrace.c
@@ -0,0 +1,144 @@
+/*
+ * Arm specific backtracing code for oprofile
+ *
+ * Copyright 2005 Openedhand Ltd.
+ *
+ * Author: Richard Purdie <rpurdie@openedhand.com>
+ *
+ * Based on i386 oprofile backtrace code by John Levon, David Smith
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/oprofile.h>
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <asm/ptrace.h>
+#include <asm/uaccess.h>
+
+
+/*
+ * The registers we're interested in are at the end of the variable
+ * length saved register structure. The fp points at the end of this
+ * structure so the address of this struct is:
+ * (struct frame_tail *)(xxx->fp)-1
+ */
+struct frame_tail {
+        struct frame_tail *fp;
+        unsigned long sp;
+        unsigned long lr;
+} __attribute__((packed));
+
+
+#ifdef CONFIG_FRAME_POINTER
+static struct frame_tail* kernel_backtrace(struct frame_tail *tail)
+{
+        oprofile_add_trace(tail->lr);
+
+        /* frame pointers should strictly progress back up the stack
+         * (towards higher addresses) */
+        if (tail >= tail->fp)
+                return NULL;
+
+        return tail->fp-1;
+}
+#endif
+
+static struct frame_tail* user_backtrace(struct frame_tail *tail)
+{
+        struct frame_tail buftail;
+
+        /* hardware pte might not be valid due to dirty/accessed bit emulation
+         * so we use copy_from_user and benefit from exception fixups */
+        if (copy_from_user(&buftail, tail, sizeof(struct frame_tail)))
+                return NULL;
+
+        oprofile_add_trace(buftail.lr);
+
+        /* frame pointers should strictly progress back up the stack
+         * (towards higher addresses) */
+        if (tail >= buftail.fp)
+                return NULL;
+
+        return buftail.fp-1;
+}
+
+/* Compare two addresses and see if they're on the same page */
+#define CMP_ADDR_EQUAL(x,y,offset) ((((unsigned long) x) >> PAGE_SHIFT) \
+        == ((((unsigned long) y) + offset) >> PAGE_SHIFT))
+
+/* check that the page(s) containing the frame tail are present */
+static int pages_present(struct frame_tail *tail)
+{
+        struct mm_struct * mm = current->mm;
+
+        if (!check_user_page_readable(mm, (unsigned long)tail))
+                return 0;
+
+        if (CMP_ADDR_EQUAL(tail, tail, 8))
+                return 1;
+
+        if (!check_user_page_readable(mm, ((unsigned long)tail) + 8))
+                return 0;
+
+        return 1;
+}
+
+/*
+ * |             | /\ Higher addresses
+ * |             |
+ * --------------- stack base (address of current_thread_info)
+ * | thread info |
+ * .             .
+ * |    stack    |
+ * --------------- saved regs->ARM_fp value if valid (frame_tail address)
+ * .             .
+ * --------------- struct pt_regs stored on stack (struct pt_regs *)
+ * |             |
+ * .             .
+ * |             |
+ * --------------- %esp
+ * |             |
+ * |             | \/ Lower addresses
+ *
+ * Thus, &pt_regs <-> stack base restricts the valid(ish) fp values
+ */
+static int valid_kernel_stack(struct frame_tail *tail, struct pt_regs *regs)
+{
+        unsigned long tailaddr = (unsigned long)tail;
+        unsigned long stack = (unsigned long)regs;
+        unsigned long stack_base = (stack & ~(THREAD_SIZE - 1)) + THREAD_SIZE;
+
+        return (tailaddr > stack) && (tailaddr < stack_base);
+}
+
+void arm_backtrace(struct pt_regs const *regs, unsigned int depth)
+{
+        struct frame_tail *tail;
+        unsigned long last_address = 0;
+
+        tail = ((struct frame_tail *) regs->ARM_fp) - 1;
+
+        if (!user_mode(regs)) {
+
+#ifdef CONFIG_FRAME_POINTER
+                while (depth-- && tail && valid_kernel_stack(tail, regs)) {
+                        tail = kernel_backtrace(tail);
+                }
+#endif
+                return;
+        }
+
+        while (depth-- && tail && !((unsigned long) tail & 3)) {
+                if ((!CMP_ADDR_EQUAL(last_address, tail, 0)
+                        || !CMP_ADDR_EQUAL(last_address, tail, 8))
+                                && !pages_present(tail))
+                        return;
+                last_address = (unsigned long) tail;
+                tail = user_backtrace(tail);
+        }
+}
+
diff --git a/arch/arm/oprofile/init.c b/arch/arm/oprofile/init.c
index cce3d3015eb7..d315a3a86c86 100644
--- a/arch/arm/oprofile/init.c
+++ b/arch/arm/oprofile/init.c
@@ -20,6 +20,8 @@ int __init oprofile_arch_init(struct oprofile_operations *ops)
         ret = pmu_init(ops, &op_xscale_spec);
 #endif
 
+        ops->backtrace = arm_backtrace;
+
         return ret;
 }
 
diff --git a/arch/arm/oprofile/op_arm_model.h b/arch/arm/oprofile/op_arm_model.h
index 2d4caf4781ad..2148d07484b7 100644
--- a/arch/arm/oprofile/op_arm_model.h
+++ b/arch/arm/oprofile/op_arm_model.h
@@ -24,6 +24,8 @@ struct op_arm_model_spec {
 extern struct op_arm_model_spec op_xscale_spec;
 #endif
 
+extern void arm_backtrace(struct pt_regs * const regs, unsigned int depth);
+
 extern int __init pmu_init(struct oprofile_operations *ops, struct op_arm_model_spec *spec);
 extern void pmu_exit(void);
 #endif /* OP_ARM_MODEL_H */