1 files changed, 6 insertions, 156 deletions

diff --git a/arch/arm/mach-s5p64x0/include/mach/uncompress.h b/arch/arm/mach-s5p64x0/include/mach/uncompress.h
index 19e0d64d78c5..bc04bd5d1a29 100644
--- a/arch/arm/mach-s5p64x0/include/mach/uncompress.h
+++ b/arch/arm/mach-s5p64x0/include/mach/uncompress.h
@@ -14,171 +14,21 @@
 #define __ASM_ARCH_UNCOMPRESS_H
 
 #include <mach/map.h>
+#include <plat/uncompress.h>
 
-/*
- * cannot use commonly <plat/uncompress.h>
- * because uart base of S5P6440 and S5P6450 is different
- */
-
-typedef unsigned int upf_t;     /* cannot include linux/serial_core.h */
-
-/* uart setup */
-
-unsigned int fifo_mask;
-unsigned int fifo_max;
-
-/* forward declerations */
-
-static void arch_detect_cpu(void);
-
-/* defines for UART registers */
-
-#include <plat/regs-serial.h>
-#include <plat/regs-watchdog.h>
-
-/* working in physical space... */
-#undef S3C2410_WDOGREG
-#define S3C2410_WDOGREG(x) ((S3C24XX_PA_WATCHDOG + (x)))
-
-/* how many bytes we allow into the FIFO at a time in FIFO mode */
-#define FIFO_MAX         (14)
-
-unsigned long uart_base;
-
-static __inline__ void get_uart_base(void)
+static void arch_detect_cpu(void)
 {
         unsigned int chipid;
 
         chipid = *(const volatile unsigned int __force *) 0xE0100118;
 
-        uart_base = S3C_UART_OFFSET * CONFIG_S3C_LOWLEVEL_UART_PORT;
-
         if ((chipid & 0xff000) == 0x50000)
-                uart_base += 0xEC800000;
+                uart_base = S5P6450_PA_UART(CONFIG_S3C_LOWLEVEL_UART_PORT);
         else
-                uart_base += 0xEC000000;
-}
-
-static __inline__ void uart_wr(unsigned int reg, unsigned int val)
-{
-        volatile unsigned int *ptr;
-
-        get_uart_base();
-        ptr = (volatile unsigned int *)(reg + uart_base);
-        *ptr = val;
-}
-
-static __inline__ unsigned int uart_rd(unsigned int reg)
-{
-        volatile unsigned int *ptr;
-
-        get_uart_base();
-        ptr = (volatile unsigned int *)(reg + uart_base);
-        return *ptr;
-}
-
-/*
- * we can deal with the case the UARTs are being run
- * in FIFO mode, so that we don't hold up our execution
- * waiting for tx to happen...
- */
-
-static void putc(int ch)
-{
-        if (uart_rd(S3C2410_UFCON) & S3C2410_UFCON_FIFOMODE) {
-                int level;
-
-                while (1) {
-                        level = uart_rd(S3C2410_UFSTAT);
-                        level &= fifo_mask;
-
-                        if (level < fifo_max)
-                                break;
-                }
-
-        } else {
-                /* not using fifos */
-
-                while ((uart_rd(S3C2410_UTRSTAT) & S3C2410_UTRSTAT_TXE) != S3C2410_UTRSTAT_TXE)
-                        barrier();
-        }
+                uart_base = S5P6440_PA_UART(CONFIG_S3C_LOWLEVEL_UART_PORT);
 
-        /* write byte to transmission register */
-        uart_wr(S3C2410_UTXH, ch);
-}
-
-static inline void flush(void)
-{
-}
-
-#define __raw_writel(d, ad)                     \
-        do {                                                    \
-                *((volatile unsigned int __force *)(ad)) = (d); \
-        } while (0)
-
-
-#ifdef CONFIG_S3C_BOOT_ERROR_RESET
-
-static void arch_decomp_error(const char *x)
-{
-        putstr("\n\n");
-        putstr(x);
-        putstr("\n\n -- System resetting\n");
-
-        __raw_writel(0x4000, S3C2410_WTDAT);
-        __raw_writel(0x4000, S3C2410_WTCNT);
-        __raw_writel(S3C2410_WTCON_ENABLE | S3C2410_WTCON_DIV128 | S3C2410_WTCON_RSTEN | S3C2410_WTCON_PRESCALE(0x40), S3C2410_WTCON);
-
-        while(1);
-}
-
-#define arch_error arch_decomp_error
-#endif
-
-#ifdef CONFIG_S3C_BOOT_UART_FORCE_FIFO
-static inline void arch_enable_uart_fifo(void)
-{
-        u32 fifocon = uart_rd(S3C2410_UFCON);
-
-        if (!(fifocon & S3C2410_UFCON_FIFOMODE)) {
-                fifocon |= S3C2410_UFCON_RESETBOTH;
-                uart_wr(S3C2410_UFCON, fifocon);
-
-                /* wait for fifo reset to complete */
-                while (1) {
-                        fifocon = uart_rd(S3C2410_UFCON);
-                        if (!(fifocon & S3C2410_UFCON_RESETBOTH))
-                                break;
-                }
-        }
-}
-#else
-#define arch_enable_uart_fifo() do { } while(0)
-#endif
-
-static void arch_decomp_setup(void)
-{
-        /*
-         * we may need to setup the uart(s) here if we are not running
-         * on an BAST... the BAST will have left the uarts configured
-         * after calling linux.
-         */
-
-        arch_detect_cpu();
-
-        /*
-         * Enable the UART FIFOs if they where not enabled and our
-         * configuration says we should turn them on.
-         */
-
-        arch_enable_uart_fifo();
-}
-
-
-
-static void arch_detect_cpu(void)
-{
-        /* we do not need to do any cpu detection here at the moment. */
+        fifo_mask = S3C2440_UFSTAT_TXMASK;
+        fifo_max = 63 << S3C2440_UFSTAT_TXSHIFT;
 }
 
 #endif /* __ASM_ARCH_UNCOMPRESS_H */