5 files changed, 9 insertions, 6 deletions

diff --git a/arch/arm/mach-pxa/include/mach/pxafb.h b/arch/arm/mach-pxa/include/mach/pxafb.h
index 8e591118371e..cbda4d35c421 100644
--- a/arch/arm/mach-pxa/include/mach/pxafb.h
+++ b/arch/arm/mach-pxa/include/mach/pxafb.h
@@ -33,6 +33,7 @@
 #define LCD_CONN_TYPE(_x)       ((_x) & 0x0f)
 #define LCD_CONN_WIDTH(_x)      (((_x) >> 4) & 0x1f)
 
+#define LCD_TYPE_MASK           0xf
 #define LCD_TYPE_UNKNOWN        0
 #define LCD_TYPE_MONO_STN       1
 #define LCD_TYPE_MONO_DSTN      2
diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c
index 0842c531ee4d..782903fe9c6c 100644
--- a/arch/arm/mach-pxa/mioa701.c
+++ b/arch/arm/mach-pxa/mioa701.c
@@ -565,7 +565,7 @@ static int mioa701_sys_suspend(struct sys_device *sysdev, pm_message_t state)
         u32 *mem_resume_unknown = phys_to_virt(RESUME_UNKNOWN_ADDR);
 
         /* Devices prepare suspend */
-        is_bt_on = gpio_get_value(GPIO83_BT_ON);
+        is_bt_on = !!gpio_get_value(GPIO83_BT_ON);
         pxa2xx_mfp_set_lpm(GPIO83_BT_ON,
                            is_bt_on ? MFP_LPM_DRIVE_HIGH : MFP_LPM_DRIVE_LOW);
 
diff --git a/arch/arm/mach-pxa/mioa701_bootresume.S b/arch/arm/mach-pxa/mioa701_bootresume.S
index a647693d9856..324d25a48c85 100644
--- a/arch/arm/mach-pxa/mioa701_bootresume.S
+++ b/arch/arm/mach-pxa/mioa701_bootresume.S
@@ -24,6 +24,7 @@ ENTRY(mioa701_jumpaddr)
 1:
         mov     r0,     #0xa0000000     @ Don't suppose memory access works
         orr     r0, r0, #0x00200000     @ even if it's supposed to
+        orr     r0, r0, #0x0000b000
         mov     r1, #0
         str     r1, [r0]                @ Early disable resume for next boot
         ldr     r0, mioa701_jumpaddr    @ (Murphy's Law)
diff --git a/arch/arm/mach-pxa/reset.c b/arch/arm/mach-pxa/reset.c
index 1b2af575c40f..00b2dc2a1074 100644
--- a/arch/arm/mach-pxa/reset.c
+++ b/arch/arm/mach-pxa/reset.c
@@ -90,12 +90,13 @@ void arch_reset(char mode)
                 /* Jump into ROM at address 0 */
                 cpu_reset(0);
                 break;
-        case 'h':
-                do_hw_reset();
-                break;
         case 'g':
                 do_gpio_reset();
                 break;
+        case 'h':
+        default:
+                do_hw_reset();
+                break;
         }
 }
 
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index f0a5bbae0b45..3be76ee2bdbf 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -67,6 +67,7 @@
 static unsigned long spitz_pin_config[] __initdata = {
         /* Chip Selects */
         GPIO78_nCS_2,   /* SCOOP #2 */
+        GPIO79_nCS_3,   /* NAND */
         GPIO80_nCS_4,   /* SCOOP #1 */
 
         /* LCD - 16bpp Active TFT */
@@ -97,10 +98,10 @@ static unsigned long spitz_pin_config[] __initdata = {
         GPIO51_nPIOW,
         GPIO85_nPCE_1,
         GPIO54_nPCE_2,
-        GPIO79_PSKTSEL,
         GPIO55_nPREG,
         GPIO56_nPWAIT,
         GPIO57_nIOIS16,
+        GPIO104_PSKTSEL,
 
         /* MMC */
         GPIO32_MMC_CLK,
@@ -686,7 +687,6 @@ static void __init akita_init(void)
         spitz_pcmcia_config.num_devs = 1;
         platform_scoop_config = &spitz_pcmcia_config;
 
-        pxa_set_i2c_info(NULL);
         i2c_register_board_info(0, ARRAY_AND_SIZE(akita_i2c_board_info));
 
         common_init();