11 files changed, 134 insertions, 42 deletions

diff --git a/arch/arm/configs/corgi_defconfig b/arch/arm/configs/corgi_defconfig
index f3af0b593eb0..98765438048d 100644
--- a/arch/arm/configs/corgi_defconfig
+++ b/arch/arm/configs/corgi_defconfig
@@ -179,7 +179,7 @@ CONFIG_MACH_HUSKY=y
 # CONFIG_MACH_AKITA is not set
 # CONFIG_MACH_SPITZ is not set
 # CONFIG_MACH_BORZOI is not set
-CONFIG_MACH_TOSA=y
+# CONFIG_MACH_TOSA is not set
 # CONFIG_ARCH_VIPER is not set
 # CONFIG_ARCH_PXA_ESERIES is not set
 # CONFIG_TRIZEPS_PXA is not set
diff --git a/arch/arm/mach-pxa/include/mach/pxafb.h b/arch/arm/mach-pxa/include/mach/pxafb.h
index 8e591118371e..cbda4d35c421 100644
--- a/arch/arm/mach-pxa/include/mach/pxafb.h
+++ b/arch/arm/mach-pxa/include/mach/pxafb.h
@@ -33,6 +33,7 @@
 #define LCD_CONN_TYPE(_x)       ((_x) & 0x0f)
 #define LCD_CONN_WIDTH(_x)      (((_x) >> 4) & 0x1f)
 
+#define LCD_TYPE_MASK           0xf
 #define LCD_TYPE_UNKNOWN        0
 #define LCD_TYPE_MONO_STN       1
 #define LCD_TYPE_MONO_DSTN      2
diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c
index 0842c531ee4d..782903fe9c6c 100644
--- a/arch/arm/mach-pxa/mioa701.c
+++ b/arch/arm/mach-pxa/mioa701.c
@@ -565,7 +565,7 @@ static int mioa701_sys_suspend(struct sys_device *sysdev, pm_message_t state)
         u32 *mem_resume_unknown = phys_to_virt(RESUME_UNKNOWN_ADDR);
 
         /* Devices prepare suspend */
-        is_bt_on = gpio_get_value(GPIO83_BT_ON);
+        is_bt_on = !!gpio_get_value(GPIO83_BT_ON);
         pxa2xx_mfp_set_lpm(GPIO83_BT_ON,
                            is_bt_on ? MFP_LPM_DRIVE_HIGH : MFP_LPM_DRIVE_LOW);
 
diff --git a/arch/arm/mach-pxa/mioa701_bootresume.S b/arch/arm/mach-pxa/mioa701_bootresume.S
index a647693d9856..324d25a48c85 100644
--- a/arch/arm/mach-pxa/mioa701_bootresume.S
+++ b/arch/arm/mach-pxa/mioa701_bootresume.S
@@ -24,6 +24,7 @@ ENTRY(mioa701_jumpaddr)
 1:
         mov     r0,     #0xa0000000     @ Don't suppose memory access works
         orr     r0, r0, #0x00200000     @ even if it's supposed to
+        orr     r0, r0, #0x0000b000
         mov     r1, #0
         str     r1, [r0]                @ Early disable resume for next boot
         ldr     r0, mioa701_jumpaddr    @ (Murphy's Law)
diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c
index 4447711c9fc6..a9d94f5dbec4 100644
--- a/arch/arm/mach-pxa/palmtx.c
+++ b/arch/arm/mach-pxa/palmtx.c
@@ -56,6 +56,9 @@ static unsigned long palmtx_pin_config[] __initdata = {
         GPIO110_MMC_DAT_2,
         GPIO111_MMC_DAT_3,
         GPIO112_MMC_CMD,
+        GPIO14_GPIO,    /* SD detect */
+        GPIO114_GPIO,   /* SD power */
+        GPIO115_GPIO,   /* SD r/o switch */
 
         /* AC97 */
         GPIO28_AC97_BITCLK,
@@ -64,6 +67,7 @@ static unsigned long palmtx_pin_config[] __initdata = {
         GPIO31_AC97_SYNC,
 
         /* IrDA */
+        GPIO40_GPIO,    /* ir disable */
         GPIO46_FICP_RXD,
         GPIO47_FICP_TXD,
 
@@ -71,7 +75,8 @@ static unsigned long palmtx_pin_config[] __initdata = {
         GPIO16_PWM0_OUT,
 
         /* USB */
-        GPIO13_GPIO,
+        GPIO13_GPIO,    /* usb detect */
+        GPIO95_GPIO,    /* usb power */
 
         /* PCMCIA */
         GPIO48_nPOE,
@@ -84,6 +89,45 @@ static unsigned long palmtx_pin_config[] __initdata = {
         GPIO55_nPREG,
         GPIO56_nPWAIT,
         GPIO57_nIOIS16,
+        GPIO94_GPIO,    /* wifi power 1 */
+        GPIO108_GPIO,   /* wifi power 2 */
+        GPIO116_GPIO,   /* wifi ready */
+
+        /* MATRIX KEYPAD */
+        GPIO100_KP_MKIN_0,
+        GPIO101_KP_MKIN_1,
+        GPIO102_KP_MKIN_2,
+        GPIO97_KP_MKIN_3,
+        GPIO103_KP_MKOUT_0,
+        GPIO104_KP_MKOUT_1,
+        GPIO105_KP_MKOUT_2,
+
+        /* LCD */
+        GPIO58_LCD_LDD_0,
+        GPIO59_LCD_LDD_1,
+        GPIO60_LCD_LDD_2,
+        GPIO61_LCD_LDD_3,
+        GPIO62_LCD_LDD_4,
+        GPIO63_LCD_LDD_5,
+        GPIO64_LCD_LDD_6,
+        GPIO65_LCD_LDD_7,
+        GPIO66_LCD_LDD_8,
+        GPIO67_LCD_LDD_9,
+        GPIO68_LCD_LDD_10,
+        GPIO69_LCD_LDD_11,
+        GPIO70_LCD_LDD_12,
+        GPIO71_LCD_LDD_13,
+        GPIO72_LCD_LDD_14,
+        GPIO73_LCD_LDD_15,
+        GPIO74_LCD_FCLK,
+        GPIO75_LCD_LCLK,
+        GPIO76_LCD_PCLK,
+        GPIO77_LCD_BIAS,
+
+        /* MISC. */
+        GPIO10_GPIO,    /* hotsync button */
+        GPIO12_GPIO,    /* power detect */
+        GPIO107_GPIO,   /* earphone detect */
 };
 
 /******************************************************************************
@@ -95,32 +139,49 @@ static int palmtx_mci_init(struct device *dev, irq_handler_t palmtx_detect_int,
         int err = 0;
 
         /* Setup an interrupt for detecting card insert/remove events */
-        err = request_irq(IRQ_GPIO_PALMTX_SD_DETECT_N, palmtx_detect_int,
-                        IRQF_DISABLED | IRQF_SAMPLE_RANDOM |
+        err = gpio_request(GPIO_NR_PALMTX_SD_DETECT_N, "SD IRQ");
+        if (err)
+                goto err;
+        err = gpio_direction_input(GPIO_NR_PALMTX_SD_DETECT_N);
+        if (err)
+                goto err2;
+        err = request_irq(gpio_to_irq(GPIO_NR_PALMTX_SD_DETECT_N),
+                        palmtx_detect_int, IRQF_DISABLED | IRQF_SAMPLE_RANDOM |
                         IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
                         "SD/MMC card detect", data);
         if (err) {
                 printk(KERN_ERR "%s: cannot request SD/MMC card detect IRQ\n",
                                 __func__);
-                return err;
+                goto err2;
         }
 
         err = gpio_request(GPIO_NR_PALMTX_SD_POWER, "SD_POWER");
         if (err)
-                goto pwr_err;
+                goto err3;
+        err = gpio_direction_output(GPIO_NR_PALMTX_SD_POWER, 0);
+        if (err)
+                goto err4;
 
         err = gpio_request(GPIO_NR_PALMTX_SD_READONLY, "SD_READONLY");
         if (err)
-                goto ro_err;
+                goto err4;
+        err = gpio_direction_input(GPIO_NR_PALMTX_SD_READONLY);
+        if (err)
+                goto err5;
 
         printk(KERN_DEBUG "%s: irq registered\n", __func__);
 
         return 0;
 
-ro_err:
+err5:
+        gpio_free(GPIO_NR_PALMTX_SD_READONLY);
+err4:
         gpio_free(GPIO_NR_PALMTX_SD_POWER);
-pwr_err:
-        free_irq(IRQ_GPIO_PALMTX_SD_DETECT_N, data);
+err3:
+        free_irq(gpio_to_irq(GPIO_NR_PALMTX_SD_DETECT_N), data);
+err2:
+        gpio_free(GPIO_NR_PALMTX_SD_DETECT_N);
+err:
         return err;
 }
 
@@ -128,7 +189,8 @@ static void palmtx_mci_exit(struct device *dev, void *data)
 {
         gpio_free(GPIO_NR_PALMTX_SD_READONLY);
         gpio_free(GPIO_NR_PALMTX_SD_POWER);
-        free_irq(IRQ_GPIO_PALMTX_SD_DETECT_N, data);
+        free_irq(gpio_to_irq(GPIO_NR_PALMTX_SD_DETECT_N), data);
+        gpio_free(GPIO_NR_PALMTX_SD_DETECT_N);
 }
 
 static void palmtx_mci_power(struct device *dev, unsigned int vdd)
@@ -167,7 +229,6 @@ static unsigned int palmtx_matrix_keys[] = {
 
         KEY(3, 0, KEY_RIGHT),
         KEY(3, 2, KEY_LEFT),
-
 };
 
 static struct pxa27x_keypad_platform_data palmtx_keypad_platform_data = {
@@ -209,11 +270,19 @@ static int palmtx_backlight_init(struct device *dev)
         ret = gpio_request(GPIO_NR_PALMTX_BL_POWER, "BL POWER");
         if (ret)
                 goto err;
+        ret = gpio_direction_output(GPIO_NR_PALMTX_BL_POWER, 0);
+        if (ret)
+                goto err2;
         ret = gpio_request(GPIO_NR_PALMTX_LCD_POWER, "LCD POWER");
         if (ret)
                 goto err2;
+        ret = gpio_direction_output(GPIO_NR_PALMTX_LCD_POWER, 0);
+        if (ret)
+                goto err3;
 
         return 0;
+err3:
+        gpio_free(GPIO_NR_PALMTX_LCD_POWER);
 err2:
         gpio_free(GPIO_NR_PALMTX_BL_POWER);
 err:
@@ -254,6 +323,24 @@ static struct platform_device palmtx_backlight = {
 /******************************************************************************
  * IrDA
  ******************************************************************************/
+static int palmtx_irda_startup(struct device *dev)
+{
+        int err;
+        err = gpio_request(GPIO_NR_PALMTX_IR_DISABLE, "IR DISABLE");
+        if (err)
+                goto err;
+        err = gpio_direction_output(GPIO_NR_PALMTX_IR_DISABLE, 1);
+        if (err)
+                gpio_free(GPIO_NR_PALMTX_IR_DISABLE);
+err:
+        return err;
+}
+
+static void palmtx_irda_shutdown(struct device *dev)
+{
+        gpio_free(GPIO_NR_PALMTX_IR_DISABLE);
+}
+
 static void palmtx_irda_transceiver_mode(struct device *dev, int mode)
 {
         gpio_set_value(GPIO_NR_PALMTX_IR_DISABLE, mode & IR_OFF);
@@ -261,6 +348,8 @@ static void palmtx_irda_transceiver_mode(struct device *dev, int mode)
 }
 
 static struct pxaficp_platform_data palmtx_ficp_platform_data = {
+        .startup                = palmtx_irda_startup,
+        .shutdown               = palmtx_irda_shutdown,
         .transceiver_cap        = IR_SIRMODE | IR_FIRMODE | IR_OFF,
         .transceiver_mode       = palmtx_irda_transceiver_mode,
 };
@@ -268,17 +357,11 @@ static struct pxaficp_platform_data palmtx_ficp_platform_data = {
 /******************************************************************************
  * UDC
  ******************************************************************************/
-static void palmtx_udc_command(int cmd)
-{
-        gpio_set_value(GPIO_NR_PALMTX_USB_POWER, !cmd);
-        udelay(50);
-        gpio_set_value(GPIO_NR_PALMTX_USB_PULLUP, !cmd);
-}
-
 static struct pxa2xx_udc_mach_info palmtx_udc_info __initdata = {
         .gpio_vbus              = GPIO_NR_PALMTX_USB_DETECT_N,
         .gpio_vbus_inverted     = 1,
-        .udc_command            = palmtx_udc_command,
+        .gpio_pullup            = GPIO_NR_PALMTX_USB_POWER,
+        .gpio_pullup_inverted   = 0,
 };
 
 /******************************************************************************
@@ -290,17 +373,16 @@ static int power_supply_init(struct device *dev)
 
         ret = gpio_request(GPIO_NR_PALMTX_POWER_DETECT, "CABLE_STATE_AC");
         if (ret)
-                goto err_cs_ac;
-
-        ret = gpio_request(GPIO_NR_PALMTX_USB_DETECT_N, "CABLE_STATE_USB");
+                goto err1;
+        ret = gpio_direction_input(GPIO_NR_PALMTX_POWER_DETECT);
         if (ret)
-                goto err_cs_usb;
+                goto err2;
 
         return 0;
 
-err_cs_usb:
+err2:
         gpio_free(GPIO_NR_PALMTX_POWER_DETECT);
-err_cs_ac:
+err1:
         return ret;
 }
 
@@ -309,14 +391,8 @@ static int palmtx_is_ac_online(void)
         return gpio_get_value(GPIO_NR_PALMTX_POWER_DETECT);
 }
 
-static int palmtx_is_usb_online(void)
-{
-        return !gpio_get_value(GPIO_NR_PALMTX_USB_DETECT_N);
-}
-
 static void power_supply_exit(struct device *dev)
 {
-        gpio_free(GPIO_NR_PALMTX_USB_DETECT_N);
         gpio_free(GPIO_NR_PALMTX_POWER_DETECT);
 }
 
@@ -327,7 +403,6 @@ static char *palmtx_supplicants[] = {
 static struct pda_power_pdata power_supply_info = {
         .init            = power_supply_init,
         .is_ac_online    = palmtx_is_ac_online,
-        .is_usb_online   = palmtx_is_usb_online,
         .exit            = power_supply_exit,
         .supplied_to     = palmtx_supplicants,
         .num_supplicants = ARRAY_SIZE(palmtx_supplicants),
@@ -410,12 +485,23 @@ static void __init palmtx_map_io(void)
         iotable_init(palmtx_io_desc, ARRAY_SIZE(palmtx_io_desc));
 }
 
+/* setup udc GPIOs initial state */
+static void __init palmtx_udc_init(void)
+{
+        if (!gpio_request(GPIO_NR_PALMTX_USB_POWER, "UDC Vbus")) {
+                gpio_direction_output(GPIO_NR_PALMTX_USB_POWER, 1);
+                gpio_free(GPIO_NR_PALMTX_USB_POWER);
+        }
+}
+
+
 static void __init palmtx_init(void)
 {
         pxa2xx_mfp_config(ARRAY_AND_SIZE(palmtx_pin_config));
 
         set_pxa_fb_info(&palmtx_lcd_screen);
         pxa_set_mci_info(&palmtx_mci_platform_data);
+        palmtx_udc_init();
         pxa_set_udc_info(&palmtx_udc_info);
         pxa_set_ac97_info(NULL);
         pxa_set_ficp_info(&palmtx_ficp_platform_data);
diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c
index f601425f1b1e..b36cec5c9eed 100644
--- a/arch/arm/mach-pxa/pcm990-baseboard.c
+++ b/arch/arm/mach-pxa/pcm990-baseboard.c
@@ -385,6 +385,7 @@ static struct soc_camera_link iclink[] = {
                 .gpio   = NR_BUILTIN_GPIO + 1,
         }, {
                 .bus_id = 0, /* Must match with the camera ID above */
+                .gpio   = -ENXIO,
         }
 };
 
diff --git a/arch/arm/mach-pxa/reset.c b/arch/arm/mach-pxa/reset.c
index 1b2af575c40f..00b2dc2a1074 100644
--- a/arch/arm/mach-pxa/reset.c
+++ b/arch/arm/mach-pxa/reset.c
@@ -90,12 +90,13 @@ void arch_reset(char mode)
                 /* Jump into ROM at address 0 */
                 cpu_reset(0);
                 break;
-        case 'h':
-                do_hw_reset();
-                break;
         case 'g':
                 do_gpio_reset();
                 break;
+        case 'h':
+        default:
+                do_hw_reset();
+                break;
         }
 }
 
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index f0a5bbae0b45..3be76ee2bdbf 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -67,6 +67,7 @@
 static unsigned long spitz_pin_config[] __initdata = {
         /* Chip Selects */
         GPIO78_nCS_2,   /* SCOOP #2 */
+        GPIO79_nCS_3,   /* NAND */
         GPIO80_nCS_4,   /* SCOOP #1 */
 
         /* LCD - 16bpp Active TFT */
@@ -97,10 +98,10 @@ static unsigned long spitz_pin_config[] __initdata = {
         GPIO51_nPIOW,
         GPIO85_nPCE_1,
         GPIO54_nPCE_2,
-        GPIO79_PSKTSEL,
         GPIO55_nPREG,
         GPIO56_nPWAIT,
         GPIO57_nIOIS16,
+        GPIO104_PSKTSEL,
 
         /* MMC */
         GPIO32_MMC_CLK,
@@ -686,7 +687,6 @@ static void __init akita_init(void)
         spitz_pcmcia_config.num_devs = 1;
         platform_scoop_config = &spitz_pcmcia_config;
 
-        pxa_set_i2c_info(NULL);
         i2c_register_board_info(0, ARRAY_AND_SIZE(akita_i2c_board_info));
 
         common_init();
diff --git a/arch/arm/mach-s3c2410/include/mach/spi-gpio.h b/arch/arm/mach-s3c2410/include/mach/spi-gpio.h
index 3fe8be9ca110..980a099e209c 100644
--- a/arch/arm/mach-s3c2410/include/mach/spi-gpio.h
+++ b/arch/arm/mach-s3c2410/include/mach/spi-gpio.h
@@ -18,6 +18,7 @@ struct s3c2410_spigpio_info {
         unsigned long            pin_mosi;
         unsigned long            pin_miso;
 
+        int                      num_chipselect;
         int                      bus_num;
 
         void (*chip_select)(struct s3c2410_spigpio_info *spi, int cs);
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index 8679fbca6bbe..424049d83fbe 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -101,6 +101,7 @@
 #define OMAP24XX_GPIO_IRQSTATUS2        0x0028
 #define OMAP24XX_GPIO_IRQENABLE2        0x002c
 #define OMAP24XX_GPIO_IRQENABLE1        0x001c
+#define OMAP24XX_GPIO_WAKE_EN           0x0020
 #define OMAP24XX_GPIO_CTRL              0x0030
 #define OMAP24XX_GPIO_OE                0x0034
 #define OMAP24XX_GPIO_DATAIN            0x0038
@@ -1551,7 +1552,7 @@ static int omap_gpio_suspend(struct sys_device *dev, pm_message_t mesg)
 #endif
 #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
                 case METHOD_GPIO_24XX:
-                        wake_status = bank->base + OMAP24XX_GPIO_SETWKUENA;
+                        wake_status = bank->base + OMAP24XX_GPIO_WAKE_EN;
                         wake_clear = bank->base + OMAP24XX_GPIO_CLEARWKUENA;
                         wake_set = bank->base + OMAP24XX_GPIO_SETWKUENA;
                         break;
@@ -1574,7 +1575,7 @@ static int omap_gpio_resume(struct sys_device *dev)
 {
         int i;
 
-        if (!cpu_is_omap24xx() && !cpu_is_omap16xx())
+        if (!cpu_class_is_omap2() && !cpu_is_omap16xx())
                 return 0;
 
         for (i = 0; i < gpio_bank_count; i++) {
diff --git a/arch/arm/plat-omap/include/mach/pm.h b/arch/arm/plat-omap/include/mach/pm.h
index 768eb6e7abcf..2a9c27ad4c37 100644
--- a/arch/arm/plat-omap/include/mach/pm.h
+++ b/arch/arm/plat-omap/include/mach/pm.h
@@ -128,7 +128,7 @@ void clk_deny_idle(struct clk *clk);
  * clk_allow_idle - Counters previous clk_deny_idle
  * @clk: clock signal handle
  */
-void clk_deny_idle(struct clk *clk);
+void clk_allow_idle(struct clk *clk);
 
 extern void omap_pm_idle(void);
 extern void omap_pm_suspend(void);