228 files changed, 1501 insertions, 2238 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 6d6e18fee9fe..2f88d8d97701 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -6,7 +6,7 @@ config ARM
        select HAVE_DMA_API_DEBUG
        select HAVE_IDE if PCI || ISA || PCMCIA
        select HAVE_DMA_ATTRS
-        select HAVE_DMA_CONTIGUOUS if (CPU_V6 || CPU_V6K || CPU_V7)
+        select HAVE_DMA_CONTIGUOUS if MMU
        select HAVE_MEMBLOCK
        select RTC_LIB
        select SYS_SUPPORTS_APM_EMULATION
@@ -2144,6 +2144,7 @@ source "drivers/cpufreq/Kconfig"
 config CPU_FREQ_IMX
        tristate "CPUfreq driver for i.MX CPUs"
        depends on ARCH_MXC && CPU_FREQ
+        select CPU_FREQ_TABLE
        help
          This enables the CPUfreq driver for i.MX CPUs.
diff --git a/arch/arm/boot/dts/at91sam9g25ek.dts b/arch/arm/boot/dts/at91sam9g25ek.dts
index 7829a4d0cb22..96514c134e54 100644
--- a/arch/arm/boot/dts/at91sam9g25ek.dts
+++ b/arch/arm/boot/dts/at91sam9g25ek.dts
@@ -15,7 +15,7 @@
        compatible = "atmel,at91sam9g25ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
        chosen {
-                bootargs = "128M console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs";
+                bootargs = "console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs";
        };
        ahb {
diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts
index cd86177a3ea2..59d9789e5508 100644
--- a/arch/arm/boot/dts/imx51-babbage.dts
+++ b/arch/arm/boot/dts/imx51-babbage.dts
@@ -25,8 +25,8 @@
                aips@70000000 { /* aips-1 */
                        spba@70000000 {
                                esdhc@70004000 { /* ESDHC1 */
-                                        fsl,cd-internal;
+                                        fsl,cd-controller;
-                                        fsl,wp-internal;
+                                        fsl,wp-controller;
                                        status = "okay";
                                };
diff --git a/arch/arm/boot/dts/kirkwood-iconnect.dts b/arch/arm/boot/dts/kirkwood-iconnect.dts
index 52d947045106..f8ca6fa88192 100644
--- a/arch/arm/boot/dts/kirkwood-iconnect.dts
+++ b/arch/arm/boot/dts/kirkwood-iconnect.dts
@@ -41,9 +41,13 @@
                };
                power-blue {
                        label = "power:blue";
-                        gpios = <&gpio1 11 0>;
+                        gpios = <&gpio1 10 0>;
                        linux,default-trigger = "timer";
                };
+                power-red {
+                        label = "power:red";
+                        gpios = <&gpio1 11 0>;
+                };
                usb1 {
                        label = "usb1:blue";
                        gpios = <&gpio1 12 0>;
diff --git a/arch/arm/configs/armadillo800eva_defconfig b/arch/arm/configs/armadillo800eva_defconfig
index 7d8718468e0d..90610c7030f7 100644
--- a/arch/arm/configs/armadillo800eva_defconfig
+++ b/arch/arm/configs/armadillo800eva_defconfig
@@ -33,7 +33,7 @@ CONFIG_AEABI=y
 CONFIG_FORCE_MAX_ZONEORDER=13
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=tty0 console=ttySC1,115200 earlyprintk=sh-sci.1,115200 ignore_loglevel root=/dev/nfs ip=dhcp nfsroot=,rsize=4096,wsize=4096"
+CONFIG_CMDLINE="console=tty0 console=ttySC1,115200 earlyprintk=sh-sci.1,115200 ignore_loglevel root=/dev/nfs ip=dhcp nfsroot=,rsize=4096,wsize=4096 rw"
 CONFIG_CMDLINE_FORCE=y
 CONFIG_KEXEC=y
 CONFIG_VFP=y
diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig
index 2d4f661d1cf6..da6845493caa 100644
--- a/arch/arm/configs/u8500_defconfig
+++ b/arch/arm/configs/u8500_defconfig
@@ -86,6 +86,7 @@ CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_LM3530=y
 CONFIG_LEDS_LP5521=y
+CONFIG_LEDS_GPIO=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_AB8500=y
 CONFIG_RTC_DRV_PL031=y
diff --git a/arch/arm/include/asm/dma-mapping.h b/arch/arm/include/asm/dma-mapping.h
index 2ae842df4551..5c44dcb0987b 100644
--- a/arch/arm/include/asm/dma-mapping.h
+++ b/arch/arm/include/asm/dma-mapping.h
@@ -203,6 +203,13 @@ static inline void dma_free_writecombine(struct device *dev, size_t size,
 }
 /*
+ * This can be called during early boot to increase the size of the atomic
+ * coherent DMA pool above the default value of 256KiB. It must be called
+ * before postcore_initcall.
+ */
+extern void __init init_dma_coherent_pool_size(unsigned long size);
+/*
 * This can be called during boot to increase the size of the consistent
 * DMA region above it's default value of 2MB. It must be called before the
 * memory allocator is initialised, i.e. before any core_initcall.
diff --git a/arch/arm/mach-at91/at91rm9200_time.c b/arch/arm/mach-at91/at91rm9200_time.c
index 104ca40d8d18..aaa443b48c91 100644
--- a/arch/arm/mach-at91/at91rm9200_time.c
+++ b/arch/arm/mach-at91/at91rm9200_time.c
@@ -197,7 +197,7 @@ void __init at91rm9200_timer_init(void)
        at91_st_read(AT91_ST_SR);
        /* Make IRQs happen for the system timer */
-        setup_irq(AT91_ID_SYS, &at91rm9200_timer_irq);
+        setup_irq(NR_IRQS_LEGACY + AT91_ID_SYS, &at91rm9200_timer_irq);
        /* The 32KiHz "Slow Clock" (tick every 30517.58 nanoseconds) is used
         * directly for the clocksource and all clockevents, after adjusting
diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
index 7b9c2ba396ed..bce572a530ef 100644
--- a/arch/arm/mach-at91/at91sam9260_devices.c
+++ b/arch/arm/mach-at91/at91sam9260_devices.c
@@ -726,6 +726,8 @@ static struct resource rtt_resources[] = {
                .flags  = IORESOURCE_MEM,
        }, {
                .flags  = IORESOURCE_MEM,
+        }, {
+                .flags  = IORESOURCE_IRQ,
        },
 };
@@ -744,10 +746,12 @@ static void __init at91_add_device_rtt_rtc(void)
         * The second resource is needed:
         * GPBR will serve as the storage for RTC time offset
         */
-        at91sam9260_rtt_device.num_resources = 2;
+        at91sam9260_rtt_device.num_resources = 3;
        rtt_resources[1].start = AT91SAM9260_BASE_GPBR +
                                 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR;
        rtt_resources[1].end = rtt_resources[1].start + 3;
+        rtt_resources[2].start = NR_IRQS_LEGACY + AT91_ID_SYS;
+        rtt_resources[2].end = NR_IRQS_LEGACY + AT91_ID_SYS;
 }
 #else
 static void __init at91_add_device_rtt_rtc(void)
diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c
index 8df5c1bdff92..bc2590d712d0 100644
--- a/arch/arm/mach-at91/at91sam9261_devices.c
+++ b/arch/arm/mach-at91/at91sam9261_devices.c
@@ -609,6 +609,8 @@ static struct resource rtt_resources[] = {
                .flags  = IORESOURCE_MEM,
        }, {
                .flags  = IORESOURCE_MEM,
+        }, {
+                .flags  = IORESOURCE_IRQ,
        }
 };
@@ -626,10 +628,12 @@ static void __init at91_add_device_rtt_rtc(void)
         * The second resource is needed:
         * GPBR will serve as the storage for RTC time offset
         */
-        at91sam9261_rtt_device.num_resources = 2;
+        at91sam9261_rtt_device.num_resources = 3;
        rtt_resources[1].start = AT91SAM9261_BASE_GPBR +
                                 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR;
        rtt_resources[1].end = rtt_resources[1].start + 3;
+        rtt_resources[2].start = NR_IRQS_LEGACY + AT91_ID_SYS;
+        rtt_resources[2].end = NR_IRQS_LEGACY + AT91_ID_SYS;
 }
 #else
 static void __init at91_add_device_rtt_rtc(void)
diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
index eb6bbf86fb9f..9b6ca734f1a9 100644
--- a/arch/arm/mach-at91/at91sam9263_devices.c
+++ b/arch/arm/mach-at91/at91sam9263_devices.c
@@ -990,6 +990,8 @@ static struct resource rtt0_resources[] = {
                .flags  = IORESOURCE_MEM,
        }, {
                .flags  = IORESOURCE_MEM,
+        }, {
+                .flags  = IORESOURCE_IRQ,
        }
 };
@@ -1006,6 +1008,8 @@ static struct resource rtt1_resources[] = {
                .flags  = IORESOURCE_MEM,
        }, {
                .flags  = IORESOURCE_MEM,
+        }, {
+                .flags  = IORESOURCE_IRQ,
        }
 };
@@ -1027,14 +1031,14 @@ static void __init at91_add_device_rtt_rtc(void)
                 * The second resource is needed only for the chosen RTT:
                 * GPBR will serve as the storage for RTC time offset
                 */
-                at91sam9263_rtt0_device.num_resources = 2;
+                at91sam9263_rtt0_device.num_resources = 3;
                at91sam9263_rtt1_device.num_resources = 1;
                pdev = &at91sam9263_rtt0_device;
                r = rtt0_resources;
                break;
        case 1:
                at91sam9263_rtt0_device.num_resources = 1;
-                at91sam9263_rtt1_device.num_resources = 2;
+                at91sam9263_rtt1_device.num_resources = 3;
                pdev = &at91sam9263_rtt1_device;
                r = rtt1_resources;
                break;
@@ -1047,6 +1051,8 @@ static void __init at91_add_device_rtt_rtc(void)
        pdev->name = "rtc-at91sam9";
        r[1].start = AT91SAM9263_BASE_GPBR + 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR;
        r[1].end = r[1].start + 3;
+        r[2].start = NR_IRQS_LEGACY + AT91_ID_SYS;
+        r[2].end = NR_IRQS_LEGACY + AT91_ID_SYS;
 }
 #else
 static void __init at91_add_device_rtt_rtc(void)
diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
index 06073996a382..1b47319ca00b 100644
--- a/arch/arm/mach-at91/at91sam9g45_devices.c
+++ b/arch/arm/mach-at91/at91sam9g45_devices.c
@@ -1293,6 +1293,8 @@ static struct resource rtt_resources[] = {
                .flags  = IORESOURCE_MEM,
        }, {
                .flags  = IORESOURCE_MEM,
+        }, {
+                .flags  = IORESOURCE_IRQ,
        }
 };
@@ -1310,10 +1312,12 @@ static void __init at91_add_device_rtt_rtc(void)
         * The second resource is needed:
         * GPBR will serve as the storage for RTC time offset
         */
-        at91sam9g45_rtt_device.num_resources = 2;
+        at91sam9g45_rtt_device.num_resources = 3;
        rtt_resources[1].start = AT91SAM9G45_BASE_GPBR +
                                 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR;
        rtt_resources[1].end = rtt_resources[1].start + 3;
+        rtt_resources[2].start = NR_IRQS_LEGACY + AT91_ID_SYS;
+        rtt_resources[2].end = NR_IRQS_LEGACY + AT91_ID_SYS;
 }
 #else
 static void __init at91_add_device_rtt_rtc(void)
diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c
index f09fff932172..b3d365dadef5 100644
--- a/arch/arm/mach-at91/at91sam9rl_devices.c
+++ b/arch/arm/mach-at91/at91sam9rl_devices.c
@@ -688,6 +688,8 @@ static struct resource rtt_resources[] = {
                .flags  = IORESOURCE_MEM,
        }, {
                .flags  = IORESOURCE_MEM,
+        }, {
+                .flags  = IORESOURCE_IRQ,
        }
 };
@@ -705,10 +707,12 @@ static void __init at91_add_device_rtt_rtc(void)
         * The second resource is needed:
         * GPBR will serve as the storage for RTC time offset
         */
-        at91sam9rl_rtt_device.num_resources = 2;
+        at91sam9rl_rtt_device.num_resources = 3;
        rtt_resources[1].start = AT91SAM9RL_BASE_GPBR +
                                 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR;
        rtt_resources[1].end = rtt_resources[1].start + 3;
+        rtt_resources[2].start = NR_IRQS_LEGACY + AT91_ID_SYS;
+        rtt_resources[2].end = NR_IRQS_LEGACY + AT91_ID_SYS;
 }
 #else
 static void __init at91_add_device_rtt_rtc(void)
diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c
index de2ec6b8fea7..188c82971ebd 100644
--- a/arch/arm/mach-at91/clock.c
+++ b/arch/arm/mach-at91/clock.c
@@ -63,6 +63,12 @@ EXPORT_SYMBOL_GPL(at91_pmc_base);
 #define cpu_has_300M_plla()     (cpu_is_at91sam9g10())
+#define cpu_has_240M_plla()     (cpu_is_at91sam9261() \
+                                || cpu_is_at91sam9263() \
+                                || cpu_is_at91sam9rl())
+#define cpu_has_210M_plla()     (cpu_is_at91sam9260())
 #define cpu_has_pllb()          (!(cpu_is_at91sam9rl() \
                                || cpu_is_at91sam9g45() \
                                || cpu_is_at91sam9x5() \
@@ -706,6 +712,12 @@ static int __init at91_pmc_init(unsigned long main_clock)
        } else if (cpu_has_800M_plla()) {
                if (plla.rate_hz > 800000000)
                        pll_overclock = true;
+        } else if (cpu_has_240M_plla()) {
+                if (plla.rate_hz > 240000000)
+                        pll_overclock = true;
+        } else if (cpu_has_210M_plla()) {
+                if (plla.rate_hz > 210000000)
+                        pll_overclock = true;
        } else {
                if (plla.rate_hz > 209000000)
                        pll_overclock = true;
diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c
index 4db5de54b6a7..6321567d8eaa 100644
--- a/arch/arm/mach-dove/common.c
+++ b/arch/arm/mach-dove/common.c
@@ -102,7 +102,8 @@ void __init dove_ehci1_init(void)
 void __init dove_ge00_init(struct mv643xx_eth_platform_data *eth_data)
 {
        orion_ge00_init(eth_data, DOVE_GE00_PHYS_BASE,
-                        IRQ_DOVE_GE00_SUM, IRQ_DOVE_GE00_ERR);
+                        IRQ_DOVE_GE00_SUM, IRQ_DOVE_GE00_ERR,
+                        1600);
 }
 /*****************************************************************************
diff --git a/arch/arm/mach-exynos/mach-origen.c b/arch/arm/mach-exynos/mach-origen.c
index 5ca80307d6d7..4e574c24581c 100644
--- a/arch/arm/mach-exynos/mach-origen.c
+++ b/arch/arm/mach-exynos/mach-origen.c
@@ -42,6 +42,7 @@
 #include <plat/backlight.h>
 #include <plat/fb.h>
 #include <plat/mfc.h>
+#include <plat/hdmi.h>
 #include <mach/ohci.h>
 #include <mach/map.h>
@@ -734,6 +735,11 @@ static void __init origen_bt_setup(void)
        s3c_gpio_setpull(EXYNOS4_GPX2(2), S3C_GPIO_PULL_NONE);
 }
+/* I2C module and id for HDMIPHY */
+static struct i2c_board_info hdmiphy_info = {
+        I2C_BOARD_INFO("hdmiphy-exynos4210", 0x38),
+};
 static void s5p_tv_setup(void)
 {
        /* Direct HPD to HDMI chip */
@@ -781,6 +787,7 @@ static void __init origen_machine_init(void)
        s5p_tv_setup();
        s5p_i2c_hdmiphy_set_platdata(NULL);
+        s5p_hdmi_set_platdata(&hdmiphy_info, NULL, 0);
 #ifdef CONFIG_DRM_EXYNOS
        s5p_device_fimd0.dev.platform_data = &drm_fimd_pdata;
diff --git a/arch/arm/mach-exynos/mach-smdkv310.c b/arch/arm/mach-exynos/mach-smdkv310.c
index 3cfa688d274a..73f2bce097e1 100644
--- a/arch/arm/mach-exynos/mach-smdkv310.c
+++ b/arch/arm/mach-exynos/mach-smdkv310.c
@@ -40,6 +40,7 @@
 #include <plat/mfc.h>
 #include <plat/ehci.h>
 #include <plat/clock.h>
+#include <plat/hdmi.h>
 #include <mach/map.h>
 #include <mach/ohci.h>
@@ -354,6 +355,11 @@ static struct platform_pwm_backlight_data smdkv310_bl_data = {
        .pwm_period_ns  = 1000,
 };
+/* I2C module and id for HDMIPHY */
+static struct i2c_board_info hdmiphy_info = {
+        I2C_BOARD_INFO("hdmiphy-exynos4210", 0x38),
+};
 static void s5p_tv_setup(void)
 {
        /* direct HPD to HDMI chip */
@@ -388,6 +394,7 @@ static void __init smdkv310_machine_init(void)
        s5p_tv_setup();
        s5p_i2c_hdmiphy_set_platdata(NULL);
+        s5p_hdmi_set_platdata(&hdmiphy_info, NULL, 0);
        samsung_keypad_set_platdata(&smdkv310_keypad_data);
diff --git a/arch/arm/mach-gemini/irq.c b/arch/arm/mach-gemini/irq.c
index ca70e5fcc7ac..020852d3bdd8 100644
--- a/arch/arm/mach-gemini/irq.c
+++ b/arch/arm/mach-gemini/irq.c
@@ -17,6 +17,7 @@
 #include <linux/sched.h>
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
+#include <asm/system_misc.h>
 #include <mach/hardware.h>
 #define IRQ_SOURCE(base_addr)   (base_addr + 0x00)
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index 07f7c226e4cf..d004d37ad9d8 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -9,7 +9,8 @@ obj-$(CONFIG_SOC_IMX27) += clk-imx27.o mm-imx27.o ehci-imx27.o
 obj-$(CONFIG_SOC_IMX31) += mm-imx3.o cpu-imx31.o clk-imx31.o iomux-imx31.o ehci-imx31.o pm-imx3.o
 obj-$(CONFIG_SOC_IMX35) += mm-imx3.o cpu-imx35.o clk-imx35.o ehci-imx35.o pm-imx3.o
-obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o mm-imx5.o clk-imx51-imx53.o ehci-imx5.o pm-imx5.o cpu_op-mx51.o
+imx5-pm-$(CONFIG_PM) += pm-imx5.o
+obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o mm-imx5.o clk-imx51-imx53.o ehci-imx5.o $(imx5-pm-y) cpu_op-mx51.o
 obj-$(CONFIG_COMMON_CLK) += clk-pllv1.o clk-pllv2.o clk-pllv3.o clk-gate2.o \
                            clk-pfd.o clk-busy.o
@@ -70,14 +71,13 @@ obj-$(CONFIG_DEBUG_LL) += lluart.o
 obj-$(CONFIG_HAVE_IMX_GPC) += gpc.o
 obj-$(CONFIG_HAVE_IMX_MMDC) += mmdc.o
 obj-$(CONFIG_HAVE_IMX_SRC) += src.o
-obj-$(CONFIG_CPU_V7) += head-v7.o
+AFLAGS_headsmp.o :=-Wa,-march=armv7-a
-AFLAGS_head-v7.o :=-Wa,-march=armv7-a
+obj-$(CONFIG_SMP) += headsmp.o platsmp.o
-obj-$(CONFIG_SMP) += platsmp.o
 obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
 obj-$(CONFIG_SOC_IMX6Q) += clk-imx6q.o mach-imx6q.o
 ifeq ($(CONFIG_PM),y)
-obj-$(CONFIG_SOC_IMX6Q) += pm-imx6q.o
+obj-$(CONFIG_SOC_IMX6Q) += pm-imx6q.o headsmp.o
 endif
 # i.MX5 based machines
diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c
index ea89520b6e22..4233d9e3531d 100644
--- a/arch/arm/mach-imx/clk-imx6q.c
+++ b/arch/arm/mach-imx/clk-imx6q.c
@@ -152,7 +152,7 @@ enum mx6q_clks {
        ssi2, ssi3, uart_ipg, uart_serial, usboh3, usdhc1, usdhc2, usdhc3,
        usdhc4, vdo_axi, vpu_axi, cko1, pll1_sys, pll2_bus, pll3_usb_otg,
        pll4_audio, pll5_video, pll6_mlb, pll7_usb_host, pll8_enet, ssi1_ipg,
-        ssi2_ipg, ssi3_ipg, rom, usbphy1, usbphy2,
+        ssi2_ipg, ssi3_ipg, rom, usbphy1, usbphy2, ldb_di0_div_3_5, ldb_di1_div_3_5,
        clk_max
 };
@@ -288,8 +288,10 @@ int __init mx6q_clocks_init(void)
        clk[gpu3d_shader]     = imx_clk_divider("gpu3d_shader",     "gpu3d_shader_sel",  base + 0x18, 29, 3);
        clk[ipu1_podf]        = imx_clk_divider("ipu1_podf",        "ipu1_sel",          base + 0x3c, 11, 3);
        clk[ipu2_podf]        = imx_clk_divider("ipu2_podf",        "ipu2_sel",          base + 0x3c, 16, 3);
-        clk[ldb_di0_podf]     = imx_clk_divider("ldb_di0_podf",     "ldb_di0_sel",       base + 0x20, 10, 1);
+        clk[ldb_di0_div_3_5]  = imx_clk_fixed_factor("ldb_di0_div_3_5", "ldb_di0_sel", 2, 7);
-        clk[ldb_di1_podf]     = imx_clk_divider("ldb_di1_podf",     "ldb_di1_sel",       base + 0x20, 11, 1);
+        clk[ldb_di0_podf]     = imx_clk_divider("ldb_di0_podf",     "ldb_di0_div_3_5",       base + 0x20, 10, 1);
+        clk[ldb_di1_div_3_5]  = imx_clk_fixed_factor("ldb_di1_div_3_5", "ldb_di1_sel", 2, 7);
+        clk[ldb_di1_podf]     = imx_clk_divider("ldb_di1_podf",     "ldb_di1_div_3_5",   base + 0x20, 11, 1);
        clk[ipu1_di0_pre]     = imx_clk_divider("ipu1_di0_pre",     "ipu1_di0_pre_sel",  base + 0x34, 3,  3);
        clk[ipu1_di1_pre]     = imx_clk_divider("ipu1_di1_pre",     "ipu1_di1_pre_sel",  base + 0x34, 12, 3);
        clk[ipu2_di0_pre]     = imx_clk_divider("ipu2_di0_pre",     "ipu2_di0_pre_sel",  base + 0x38, 3,  3);
diff --git a/arch/arm/mach-imx/head-v7.S b/arch/arm/mach-imx/headsmp.S
index 7e49deb128a4..7e49deb128a4 100644
--- a/arch/arm/mach-imx/head-v7.S
+++ b/arch/arm/mach-imx/headsmp.S
diff --git a/arch/arm/mach-imx/hotplug.c b/arch/arm/mach-imx/hotplug.c
index 20ed2d56c1af..f8f7437c83b8 100644
--- a/arch/arm/mach-imx/hotplug.c
+++ b/arch/arm/mach-imx/hotplug.c
@@ -42,22 +42,6 @@ static inline void cpu_enter_lowpower(void)
          : "cc");
 }
-static inline void cpu_leave_lowpower(void)
-{
-        unsigned int v;
-        asm volatile(
-                "mrc    p15, 0, %0, c1, c0, 0\n"
-        "       orr     %0, %0, %1\n"
-        "       mcr     p15, 0, %0, c1, c0, 0\n"
-        "       mrc     p15, 0, %0, c1, c0, 1\n"
-        "       orr     %0, %0, %2\n"
-        "       mcr     p15, 0, %0, c1, c0, 1\n"
-          : "=&r" (v)
-          : "Ir" (CR_C), "Ir" (0x40)
-          : "cc");
-}
 /*
 * platform-specific code to shutdown a CPU
 *
@@ -67,11 +51,10 @@ void platform_cpu_die(unsigned int cpu)
 {
        cpu_enter_lowpower();
        imx_enable_cpu(cpu, false);
-        cpu_do_idle();
-        cpu_leave_lowpower();
-        /* We should never return from idle */
+        /* spin here until hardware takes it down */
-        panic("cpu %d unexpectedly exit from shutdown\n", cpu);
+        while (1)
+                ;
 }
 int platform_cpu_disable(unsigned int cpu)
diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c
index 5ec0608f2a76..045b3f6a387d 100644
--- a/arch/arm/mach-imx/mach-imx6q.c
+++ b/arch/arm/mach-imx/mach-imx6q.c
@@ -71,7 +71,7 @@ soft:
 /* For imx6q sabrelite board: set KSZ9021RN RGMII pad skew */
 static int ksz9021rn_phy_fixup(struct phy_device *phydev)
 {
-        if (IS_ENABLED(CONFIG_PHYLIB)) {
+        if (IS_BUILTIN(CONFIG_PHYLIB)) {
                /* min rx data delay */
                phy_write(phydev, 0x0b, 0x8105);
                phy_write(phydev, 0x0c, 0x0000);
@@ -112,7 +112,7 @@ put_clk:
 static void __init imx6q_sabrelite_init(void)
 {
-        if (IS_ENABLED(CONFIG_PHYLIB))
+        if (IS_BUILTIN(CONFIG_PHYLIB))
                phy_register_fixup_for_uid(PHY_ID_KSZ9021, MICREL_PHY_ID_MASK,
                                ksz9021rn_phy_fixup);
        imx6q_sabrelite_cko1_setup();
diff --git a/arch/arm/mach-kirkwood/Makefile.boot b/arch/arm/mach-kirkwood/Makefile.boot
index a5717558ee89..a13299d758e1 100644
--- a/arch/arm/mach-kirkwood/Makefile.boot
+++ b/arch/arm/mach-kirkwood/Makefile.boot
@@ -7,7 +7,8 @@ dtb-$(CONFIG_MACH_DLINK_KIRKWOOD_DT) += kirkwood-dns320.dtb
 dtb-$(CONFIG_MACH_DLINK_KIRKWOOD_DT) += kirkwood-dns325.dtb
 dtb-$(CONFIG_MACH_ICONNECT_DT) += kirkwood-iconnect.dtb
 dtb-$(CONFIG_MACH_IB62X0_DT) += kirkwood-ib62x0.dtb
-dtb-$(CONFIG_MACH_TS219_DT)     += kirkwood-qnap-ts219.dtb
+dtb-$(CONFIG_MACH_TS219_DT)     += kirkwood-ts219-6281.dtb
+dtb-$(CONFIG_MACH_TS219_DT)     += kirkwood-ts219-6282.dtb
 dtb-$(CONFIG_MACH_GOFLEXNET_DT) += kirkwood-goflexnet.dtb
 dtb-$(CONFIG_MACH_LSXL_DT) += kirkwood-lschlv2.dtb
 dtb-$(CONFIG_MACH_LSXL_DT) += kirkwood-lsxhl.dtb
diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
index c4b64adcbfce..1201191d7f1b 100644
--- a/arch/arm/mach-kirkwood/common.c
+++ b/arch/arm/mach-kirkwood/common.c
@@ -301,7 +301,7 @@ void __init kirkwood_ge00_init(struct mv643xx_eth_platform_data *eth_data)
 {
        orion_ge00_init(eth_data,
                        GE00_PHYS_BASE, IRQ_KIRKWOOD_GE00_SUM,
-                        IRQ_KIRKWOOD_GE00_ERR);
+                        IRQ_KIRKWOOD_GE00_ERR, 1600);
        /* The interface forgets the MAC address assigned by u-boot if
        the clock is turned off, so claim the clk now. */
        clk_prepare_enable(ge0);
@@ -315,7 +315,7 @@ void __init kirkwood_ge01_init(struct mv643xx_eth_platform_data *eth_data)
 {
        orion_ge01_init(eth_data,
                        GE01_PHYS_BASE, IRQ_KIRKWOOD_GE01_SUM,
-                        IRQ_KIRKWOOD_GE01_ERR);
+                        IRQ_KIRKWOOD_GE01_ERR, 1600);
        clk_prepare_enable(ge1);
 }
@@ -517,6 +517,13 @@ void __init kirkwood_wdt_init(void)
 void __init kirkwood_init_early(void)
 {
        orion_time_set_base(TIMER_VIRT_BASE);
+        /*
+         * Some Kirkwood devices allocate their coherent buffers from atomic
+         * context. Increase size of atomic coherent pool to make sure such
+         * the allocations won't fail.
+         */
+        init_dma_coherent_pool_size(SZ_1M);
 }
 int kirkwood_tclk;
diff --git a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
index d93359379598..be90b7d0e10b 100644
--- a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
+++ b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
@@ -10,6 +10,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/sizes.h>
 #include <linux/platform_device.h>
 #include <linux/mtd/partitions.h>
 #include <linux/ata_platform.h>
diff --git a/arch/arm/mach-mmp/sram.c b/arch/arm/mach-mmp/sram.c
index 4304f9519372..7e8a5a2e1ec7 100644
--- a/arch/arm/mach-mmp/sram.c
+++ b/arch/arm/mach-mmp/sram.c
@@ -68,7 +68,7 @@ static int __devinit sram_probe(struct platform_device *pdev)
        struct resource *res;
        int ret = 0;
-        if (!pdata && !pdata->pool_name)
+        if (!pdata || !pdata->pool_name)
                return -ENODEV;
        info = kzalloc(sizeof(*info), GFP_KERNEL);
diff --git a/arch/arm/mach-mv78xx0/addr-map.c b/arch/arm/mach-mv78xx0/addr-map.c
index 62b53d710efd..a9bc84180d21 100644
--- a/arch/arm/mach-mv78xx0/addr-map.c
+++ b/arch/arm/mach-mv78xx0/addr-map.c
@@ -37,7 +37,7 @@
 #define WIN0_OFF(n)             (BRIDGE_VIRT_BASE + 0x0000 + ((n) << 4))
 #define WIN8_OFF(n)             (BRIDGE_VIRT_BASE + 0x0900 + (((n) - 8) << 4))
-static void __init __iomem *win_cfg_base(int win)
+static void __init __iomem *win_cfg_base(const struct orion_addr_map_cfg *cfg, int win)
 {
        /*
         * Find the control register base address for this window.
diff --git a/arch/arm/mach-mv78xx0/common.c b/arch/arm/mach-mv78xx0/common.c
index b4c53b846c9c..3057f7d4329a 100644
--- a/arch/arm/mach-mv78xx0/common.c
+++ b/arch/arm/mach-mv78xx0/common.c
@@ -213,7 +213,8 @@ void __init mv78xx0_ge00_init(struct mv643xx_eth_platform_data *eth_data)
 {
        orion_ge00_init(eth_data,
                        GE00_PHYS_BASE, IRQ_MV78XX0_GE00_SUM,
-                        IRQ_MV78XX0_GE_ERR);
+                        IRQ_MV78XX0_GE_ERR,
+                        MV643XX_TX_CSUM_DEFAULT_LIMIT);
 }
@@ -224,7 +225,8 @@ void __init mv78xx0_ge01_init(struct mv643xx_eth_platform_data *eth_data)
 {
        orion_ge01_init(eth_data,
                        GE01_PHYS_BASE, IRQ_MV78XX0_GE01_SUM,
-                        NO_IRQ);
+                        NO_IRQ,
+                        MV643XX_TX_CSUM_DEFAULT_LIMIT);
 }
diff --git a/arch/arm/mach-omap1/ams-delta-fiq-handler.S b/arch/arm/mach-omap1/ams-delta-fiq-handler.S
index a051cb8ae57f..d2b6acce8fc1 100644
--- a/arch/arm/mach-omap1/ams-delta-fiq-handler.S
+++ b/arch/arm/mach-omap1/ams-delta-fiq-handler.S
@@ -18,6 +18,7 @@
 #include <plat/board-ams-delta.h>
+#include <mach/irqs.h>
 #include <mach/ams-delta-fiq.h>
 #include "iomap.h"
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index c53469802c03..6f192c4900b1 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -26,6 +26,7 @@
 #include <linux/export.h>
 #include <linux/omapfb.h>
 #include <linux/io.h>
+#include <linux/platform_data/gpio-omap.h>
 #include <media/soc_camera.h>
@@ -37,7 +38,6 @@
 #include <plat/board-ams-delta.h>
 #include <plat/keypad.h>
 #include <plat/mux.h>
-#include <plat/board.h>
 #include <mach/hardware.h>
 #include <mach/ams-delta-fiq.h>
diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c
index 6872f3fd400f..6d985521a39e 100644
--- a/arch/arm/mach-omap1/board-fsample.c
+++ b/arch/arm/mach-omap1/board-fsample.c
@@ -32,7 +32,6 @@
 #include <plat/flash.h>
 #include <plat/fpga.h>
 #include <plat/keypad.h>
-#include <plat/board.h>
 #include <mach/hardware.h>
diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c
index 6ec385e2b98e..04b5fdaff831 100644
--- a/arch/arm/mach-omap1/board-generic.c
+++ b/arch/arm/mach-omap1/board-generic.c
@@ -23,7 +23,6 @@
 #include <asm/mach/map.h>
 #include <plat/mux.h>
-#include <plat/board.h>
 #include <mach/usb.h>
@@ -52,9 +51,6 @@ static struct omap_usb_config generic1610_usb_config __initdata = {
 };
 #endif
-static struct omap_board_config_kernel generic_config[] __initdata = {
-};
 static void __init omap_generic_init(void)
 {
 #ifdef CONFIG_ARCH_OMAP15XX
@@ -76,8 +72,6 @@ static void __init omap_generic_init(void)
        }
 #endif
-        omap_board_config = generic_config;
-        omap_board_config_size = ARRAY_SIZE(generic_config);
        omap_serial_init();
        omap_register_i2c_bus(1, 100, NULL, 0);
 }
diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c
index b3f6e943e661..a5ac352d68d3 100644
--- a/arch/arm/mach-omap1/board-htcherald.c
+++ b/arch/arm/mach-omap1/board-htcherald.c
@@ -41,8 +41,7 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <plat/omap7xx.h>
+#include <mach/omap7xx.h>
-#include <plat/board.h>
 #include <plat/keypad.h>
 #include <plat/mmc.h>
diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c
index 2c0ca8fc3380..ec01f03d0446 100644
--- a/arch/arm/mach-omap1/board-nokia770.c
+++ b/arch/arm/mach-omap1/board-nokia770.c
@@ -26,7 +26,6 @@
 #include <asm/mach/map.h>
 #include <plat/mux.h>
-#include <plat/board.h>
 #include <plat/keypad.h>
 #include <plat/lcd_mipid.h>
 #include <plat/mmc.h>
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index 8784705edb60..3b2d9071022a 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -39,6 +39,8 @@
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
 #include <linux/i2c/tps65010.h>
+#include <linux/platform_data/gpio-omap.h>
+#include <linux/platform_data/omap1_bl.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c
index 26bcb9defcdc..49f8d745ea1f 100644
--- a/arch/arm/mach-omap1/board-palmte.c
+++ b/arch/arm/mach-omap1/board-palmte.c
@@ -28,6 +28,7 @@
 #include <linux/interrupt.h>
 #include <linux/apm-emulation.h>
 #include <linux/omapfb.h>
+#include <linux/platform_data/omap1_bl.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -37,7 +38,6 @@
 #include <plat/mux.h>
 #include <plat/tc.h>
 #include <plat/dma.h>
-#include <plat/board.h>
 #include <plat/irda.h>
 #include <plat/keypad.h>
diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c
index 4d099446dfa8..01523cd78e58 100644
--- a/arch/arm/mach-omap1/board-palmtt.c
+++ b/arch/arm/mach-omap1/board-palmtt.c
@@ -27,6 +27,7 @@
 #include <linux/omapfb.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
+#include <linux/platform_data/omap1_bl.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -37,7 +38,6 @@
 #include <plat/mux.h>
 #include <plat/dma.h>
 #include <plat/tc.h>
-#include <plat/board.h>
 #include <plat/irda.h>
 #include <plat/keypad.h>
diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c
index 355980321c2d..a7abce69043a 100644
--- a/arch/arm/mach-omap1/board-palmz71.c
+++ b/arch/arm/mach-omap1/board-palmz71.c
@@ -30,6 +30,7 @@
 #include <linux/omapfb.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
+#include <linux/platform_data/omap1_bl.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -39,7 +40,6 @@
 #include <plat/mux.h>
 #include <plat/dma.h>
 #include <plat/tc.h>
-#include <plat/board.h>
 #include <plat/irda.h>
 #include <plat/keypad.h>
diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c
index 703d55ecffe2..277e0bc60a43 100644
--- a/arch/arm/mach-omap1/board-perseus2.c
+++ b/arch/arm/mach-omap1/board-perseus2.c
@@ -32,7 +32,6 @@
 #include <plat/fpga.h>
 #include <plat/flash.h>
 #include <plat/keypad.h>
-#include <plat/board.h>
 #include <mach/hardware.h>
diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c
index 8c665bd16ac2..2e1fff26a2f3 100644
--- a/arch/arm/mach-omap1/board-sx1.c
+++ b/arch/arm/mach-omap1/board-sx1.c
@@ -38,7 +38,6 @@
 #include <plat/dma.h>
 #include <plat/irda.h>
 #include <plat/tc.h>
-#include <plat/board.h>
 #include <plat/keypad.h>
 #include <plat/board-sx1.h>
diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c
index 3497769eb353..1668af3017de 100644
--- a/arch/arm/mach-omap1/board-voiceblue.c
+++ b/arch/arm/mach-omap1/board-voiceblue.c
@@ -35,7 +35,6 @@
 #include <plat/flash.h>
 #include <plat/mux.h>
 #include <plat/tc.h>
-#include <plat/board.h>
 #include <mach/hardware.h>
 #include <mach/usb.h>
@@ -155,9 +154,6 @@ static struct omap_usb_config voiceblue_usb_config __initdata = {
        .pins[2]        = 6,
 };
-static struct omap_board_config_kernel voiceblue_config[] = {
-};
 #define MACHINE_PANICED         1
 #define MACHINE_REBOOTING       2
 #define MACHINE_REBOOT          4
@@ -275,8 +271,6 @@ static void __init voiceblue_init(void)
        voiceblue_smc91x_resources[1].start = gpio_to_irq(8);
        voiceblue_smc91x_resources[1].end = gpio_to_irq(8);
        platform_add_devices(voiceblue_devices, ARRAY_SIZE(voiceblue_devices));
-        omap_board_config = voiceblue_config;
-        omap_board_config_size = ARRAY_SIZE(voiceblue_config);
        omap_serial_init();
        omap1_usb_init(&voiceblue_usb_config);
        omap_register_i2c_bus(1, 100, NULL, 0);
diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c
index c007d80dfb62..6a32b9b0dc30 100644
--- a/arch/arm/mach-omap1/clock_data.c
+++ b/arch/arm/mach-omap1/clock_data.c
@@ -25,7 +25,6 @@
 #include <plat/clock.h>
 #include <plat/cpu.h>
 #include <plat/clkdev_omap.h>
-#include <plat/board.h>
 #include <plat/sram.h>  /* for omap_sram_reprogram_clock() */
 #include <mach/hardware.h>
@@ -788,7 +787,6 @@ u32 cpu_mask;
 int __init omap1_clk_init(void)
 {
        struct omap_clk *c;
-        const struct omap_clock_config *info;
        int crystal_type = 0; /* Default 12 MHz */
        u32 reg;
@@ -837,12 +835,6 @@ int __init omap1_clk_init(void)
        ck_dpll1_p = clk_get(NULL, "ck_dpll1");
        ck_ref_p = clk_get(NULL, "ck_ref");
-        info = omap_get_config(OMAP_TAG_CLOCK, struct omap_clock_config);
-        if (info != NULL) {
-                if (!cpu_is_omap15xx())
-                        crystal_type = info->system_clock_type;
-        }
        if (cpu_is_omap7xx())
                ck_ref.rate = 13000000;
        if (cpu_is_omap16xx() && crystal_type == 2)
diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c
index fa1fa4deb6aa..05fdbd992c77 100644
--- a/arch/arm/mach-omap1/devices.c
+++ b/arch/arm/mach-omap1/devices.c
@@ -20,12 +20,11 @@
 #include <asm/mach/map.h>
 #include <plat/tc.h>
-#include <plat/board.h>
 #include <plat/mux.h>
 #include <plat/dma.h>
 #include <plat/mmc.h>
-#include <plat/omap7xx.h>
+#include <mach/omap7xx.h>
 #include <mach/camera.h>
 #include <mach/hardware.h>
diff --git a/arch/arm/mach-omap1/dma.c b/arch/arm/mach-omap1/dma.c
index 3ef7d52316b4..b0b0f0f27450 100644
--- a/arch/arm/mach-omap1/dma.c
+++ b/arch/arm/mach-omap1/dma.c
@@ -27,7 +27,8 @@
 #include <plat/dma.h>
 #include <plat/tc.h>
-#include <plat/irqs.h>
+#include <mach/irqs.h>
 #define OMAP1_DMA_BASE                  (0xfffed800)
 #define OMAP1_LOGICAL_DMA_CH_COUNT      17
diff --git a/arch/arm/mach-omap1/gpio15xx.c b/arch/arm/mach-omap1/gpio15xx.c
index ebef15e5e7b7..98e6f39224a4 100644
--- a/arch/arm/mach-omap1/gpio15xx.c
+++ b/arch/arm/mach-omap1/gpio15xx.c
@@ -17,6 +17,7 @@
 */
 #include <linux/gpio.h>
+#include <linux/platform_data/gpio-omap.h>
 #define OMAP1_MPUIO_VBASE               OMAP1_MPUIO_BASE
 #define OMAP1510_GPIO_BASE              0xFFFCE000
diff --git a/arch/arm/mach-omap1/gpio16xx.c b/arch/arm/mach-omap1/gpio16xx.c
index 2a48cd2e1754..33f419236b17 100644
--- a/arch/arm/mach-omap1/gpio16xx.c
+++ b/arch/arm/mach-omap1/gpio16xx.c
@@ -17,6 +17,7 @@
 */
 #include <linux/gpio.h>
+#include <linux/platform_data/gpio-omap.h>
 #define OMAP1610_GPIO1_BASE             0xfffbe400
 #define OMAP1610_GPIO2_BASE             0xfffbec00
diff --git a/arch/arm/mach-omap1/gpio7xx.c b/arch/arm/mach-omap1/gpio7xx.c
index acf12b73eace..958ce9acee95 100644
--- a/arch/arm/mach-omap1/gpio7xx.c
+++ b/arch/arm/mach-omap1/gpio7xx.c
@@ -17,6 +17,7 @@
 */
 #include <linux/gpio.h>
+#include <linux/platform_data/gpio-omap.h>
 #define OMAP7XX_GPIO1_BASE              0xfffbc000
 #define OMAP7XX_GPIO2_BASE              0xfffbc800
diff --git a/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h b/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h
index 23eed0035ed8..adb5e7649659 100644
--- a/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h
+++ b/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h
@@ -14,8 +14,6 @@
 #ifndef __AMS_DELTA_FIQ_H
 #define __AMS_DELTA_FIQ_H
-#include <plat/irqs.h>
 /*
 * Interrupt number used for passing control from FIQ to IRQ.
 * IRQ12, described as reserved, has been selected.
diff --git a/arch/arm/mach-omap1/include/mach/gpio.h b/arch/arm/mach-omap1/include/mach/gpio.h
index e737706a8fe1..ebf86c0f4f46 100644
--- a/arch/arm/mach-omap1/include/mach/gpio.h
+++ b/arch/arm/mach-omap1/include/mach/gpio.h
@@ -1,5 +1,3 @@
 /*
 * arch/arm/mach-omap1/include/mach/gpio.h
 */
-#include <plat/gpio.h>
diff --git a/arch/arm/mach-omap1/include/mach/hardware.h b/arch/arm/mach-omap1/include/mach/hardware.h
index 01e35fa106b8..84248d250adb 100644
--- a/arch/arm/mach-omap1/include/mach/hardware.h
+++ b/arch/arm/mach-omap1/include/mach/hardware.h
@@ -1,11 +1,46 @@
 /*
 * arch/arm/mach-omap1/include/mach/hardware.h
+ *
+ * Hardware definitions for TI OMAP processors and boards
+ *
+ * NOTE: Please put device driver specific defines into a separate header
+ *       file for each driver.
+ *
+ * Copyright (C) 2001 RidgeRun, Inc.
+ * Author: RidgeRun, Inc. Greg Lonnon <glonnon@ridgerun.com>
+ *
+ * Reorganized for Linux-2.6 by Tony Lindgren <tony@atomide.com>
+ *                          and Dirk Behme <dirk.behme@de.bosch.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
 */
-#ifndef __MACH_HARDWARE_H
+#ifndef __ASM_ARCH_OMAP_HARDWARE_H
-#define __MACH_HARDWARE_H
+#define __ASM_ARCH_OMAP_HARDWARE_H
+#include <asm/sizes.h>
 #ifndef __ASSEMBLER__
+#include <asm/types.h>
+#include <plat/cpu.h>
 /*
 * NOTE: Please use ioremap + __raw_read/write where possible instead of these
 */
@@ -35,7 +70,249 @@ static inline u32 omap_cs3_phys(void)
                        ? 0 : OMAP_CS3_PHYS;
 }
+#endif  /* ifndef __ASSEMBLER__ */
+#include <plat/serial.h>
+/*
+ * ---------------------------------------------------------------------------
+ * Common definitions for all OMAP processors
+ * NOTE: Put all processor or board specific parts to the special header
+ *       files.
+ * ---------------------------------------------------------------------------
+ */
+/*
+ * ----------------------------------------------------------------------------
+ * Timers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP_MPU_TIMER1_BASE    (0xfffec500)
+#define OMAP_MPU_TIMER2_BASE    (0xfffec600)
+#define OMAP_MPU_TIMER3_BASE    (0xfffec700)
+#define MPU_TIMER_FREE          (1 << 6)
+#define MPU_TIMER_CLOCK_ENABLE  (1 << 5)
+#define MPU_TIMER_AR            (1 << 1)
+#define MPU_TIMER_ST            (1 << 0)
+/*
+ * ----------------------------------------------------------------------------
+ * Clocks
+ * ----------------------------------------------------------------------------
+ */
+#define CLKGEN_REG_BASE         (0xfffece00)
+#define ARM_CKCTL               (CLKGEN_REG_BASE + 0x0)
+#define ARM_IDLECT1             (CLKGEN_REG_BASE + 0x4)
+#define ARM_IDLECT2             (CLKGEN_REG_BASE + 0x8)
+#define ARM_EWUPCT              (CLKGEN_REG_BASE + 0xC)
+#define ARM_RSTCT1              (CLKGEN_REG_BASE + 0x10)
+#define ARM_RSTCT2              (CLKGEN_REG_BASE + 0x14)
+#define ARM_SYSST               (CLKGEN_REG_BASE + 0x18)
+#define ARM_IDLECT3             (CLKGEN_REG_BASE + 0x24)
+#define CK_RATEF                1
+#define CK_IDLEF                2
+#define CK_ENABLEF              4
+#define CK_SELECTF              8
+#define SETARM_IDLE_SHIFT
+/* DPLL control registers */
+#define DPLL_CTL                (0xfffecf00)
+/* DSP clock control. Must use __raw_readw() and __raw_writew() with these */
+#define DSP_CONFIG_REG_BASE     IOMEM(0xe1008000)
+#define DSP_CKCTL               (DSP_CONFIG_REG_BASE + 0x0)
+#define DSP_IDLECT1             (DSP_CONFIG_REG_BASE + 0x4)
+#define DSP_IDLECT2             (DSP_CONFIG_REG_BASE + 0x8)
+#define DSP_RSTCT2              (DSP_CONFIG_REG_BASE + 0x14)
+/*
+ * ---------------------------------------------------------------------------
+ * UPLD
+ * ---------------------------------------------------------------------------
+ */
+#define ULPD_REG_BASE           (0xfffe0800)
+#define ULPD_IT_STATUS          (ULPD_REG_BASE + 0x14)
+#define ULPD_SETUP_ANALOG_CELL_3        (ULPD_REG_BASE + 0x24)
+#define ULPD_CLOCK_CTRL         (ULPD_REG_BASE + 0x30)
+#       define DIS_USB_PVCI_CLK         (1 << 5)        /* no USB/FAC synch */
+#       define USB_MCLK_EN              (1 << 4)        /* enable W4_USB_CLKO */
+#define ULPD_SOFT_REQ           (ULPD_REG_BASE + 0x34)
+#       define SOFT_UDC_REQ             (1 << 4)
+#       define SOFT_USB_CLK_REQ         (1 << 3)
+#       define SOFT_DPLL_REQ            (1 << 0)
+#define ULPD_DPLL_CTRL          (ULPD_REG_BASE + 0x3c)
+#define ULPD_STATUS_REQ         (ULPD_REG_BASE + 0x40)
+#define ULPD_APLL_CTRL          (ULPD_REG_BASE + 0x4c)
+#define ULPD_POWER_CTRL         (ULPD_REG_BASE + 0x50)
+#define ULPD_SOFT_DISABLE_REQ_REG       (ULPD_REG_BASE + 0x68)
+#       define DIS_MMC2_DPLL_REQ        (1 << 11)
+#       define DIS_MMC1_DPLL_REQ        (1 << 10)
+#       define DIS_UART3_DPLL_REQ       (1 << 9)
+#       define DIS_UART2_DPLL_REQ       (1 << 8)
+#       define DIS_UART1_DPLL_REQ       (1 << 7)
+#       define DIS_USB_HOST_DPLL_REQ    (1 << 6)
+#define ULPD_SDW_CLK_DIV_CTRL_SEL       (ULPD_REG_BASE + 0x74)
+#define ULPD_CAM_CLK_CTRL       (ULPD_REG_BASE + 0x7c)
+/*
+ * ---------------------------------------------------------------------------
+ * Watchdog timer
+ * ---------------------------------------------------------------------------
+ */
+/* Watchdog timer within the OMAP3.2 gigacell */
+#define OMAP_MPU_WATCHDOG_BASE  (0xfffec800)
+#define OMAP_WDT_TIMER          (OMAP_MPU_WATCHDOG_BASE + 0x0)
+#define OMAP_WDT_LOAD_TIM       (OMAP_MPU_WATCHDOG_BASE + 0x4)
+#define OMAP_WDT_READ_TIM       (OMAP_MPU_WATCHDOG_BASE + 0x4)
+#define OMAP_WDT_TIMER_MODE     (OMAP_MPU_WATCHDOG_BASE + 0x8)
+/*
+ * ---------------------------------------------------------------------------
+ * Interrupts
+ * ---------------------------------------------------------------------------
+ */
+#ifdef CONFIG_ARCH_OMAP1
+/*
+ * XXX: These probably want to be moved to arch/arm/mach-omap/omap1/irq.c
+ * or something similar.. -- PFM.
+ */
+#define OMAP_IH1_BASE           0xfffecb00
+#define OMAP_IH2_BASE           0xfffe0000
+#define OMAP_IH1_ITR            (OMAP_IH1_BASE + 0x00)
+#define OMAP_IH1_MIR            (OMAP_IH1_BASE + 0x04)
+#define OMAP_IH1_SIR_IRQ        (OMAP_IH1_BASE + 0x10)
+#define OMAP_IH1_SIR_FIQ        (OMAP_IH1_BASE + 0x14)
+#define OMAP_IH1_CONTROL        (OMAP_IH1_BASE + 0x18)
+#define OMAP_IH1_ILR0           (OMAP_IH1_BASE + 0x1c)
+#define OMAP_IH1_ISR            (OMAP_IH1_BASE + 0x9c)
+#define OMAP_IH2_ITR            (OMAP_IH2_BASE + 0x00)
+#define OMAP_IH2_MIR            (OMAP_IH2_BASE + 0x04)
+#define OMAP_IH2_SIR_IRQ        (OMAP_IH2_BASE + 0x10)
+#define OMAP_IH2_SIR_FIQ        (OMAP_IH2_BASE + 0x14)
+#define OMAP_IH2_CONTROL        (OMAP_IH2_BASE + 0x18)
+#define OMAP_IH2_ILR0           (OMAP_IH2_BASE + 0x1c)
+#define OMAP_IH2_ISR            (OMAP_IH2_BASE + 0x9c)
+#define IRQ_ITR_REG_OFFSET      0x00
+#define IRQ_MIR_REG_OFFSET      0x04
+#define IRQ_SIR_IRQ_REG_OFFSET  0x10
+#define IRQ_SIR_FIQ_REG_OFFSET  0x14
+#define IRQ_CONTROL_REG_OFFSET  0x18
+#define IRQ_ISR_REG_OFFSET      0x9c
+#define IRQ_ILR0_REG_OFFSET     0x1c
+#define IRQ_GMR_REG_OFFSET      0xa0
 #endif
-#endif
-#include <plat/hardware.h>
+/*
+ * ----------------------------------------------------------------------------
+ * System control registers
+ * ----------------------------------------------------------------------------
+ */
+#define MOD_CONF_CTRL_0         0xfffe1080
+#define MOD_CONF_CTRL_1         0xfffe1110
+/*
+ * ----------------------------------------------------------------------------
+ * Pin multiplexing registers
+ * ----------------------------------------------------------------------------
+ */
+#define FUNC_MUX_CTRL_0         0xfffe1000
+#define FUNC_MUX_CTRL_1         0xfffe1004
+#define FUNC_MUX_CTRL_2         0xfffe1008
+#define COMP_MODE_CTRL_0        0xfffe100c
+#define FUNC_MUX_CTRL_3         0xfffe1010
+#define FUNC_MUX_CTRL_4         0xfffe1014
+#define FUNC_MUX_CTRL_5         0xfffe1018
+#define FUNC_MUX_CTRL_6         0xfffe101C
+#define FUNC_MUX_CTRL_7         0xfffe1020
+#define FUNC_MUX_CTRL_8         0xfffe1024
+#define FUNC_MUX_CTRL_9         0xfffe1028
+#define FUNC_MUX_CTRL_A         0xfffe102C
+#define FUNC_MUX_CTRL_B         0xfffe1030
+#define FUNC_MUX_CTRL_C         0xfffe1034
+#define FUNC_MUX_CTRL_D         0xfffe1038
+#define PULL_DWN_CTRL_0         0xfffe1040
+#define PULL_DWN_CTRL_1         0xfffe1044
+#define PULL_DWN_CTRL_2         0xfffe1048
+#define PULL_DWN_CTRL_3         0xfffe104c
+#define PULL_DWN_CTRL_4         0xfffe10ac
+/* OMAP-1610 specific multiplexing registers */
+#define FUNC_MUX_CTRL_E         0xfffe1090
+#define FUNC_MUX_CTRL_F         0xfffe1094
+#define FUNC_MUX_CTRL_10        0xfffe1098
+#define FUNC_MUX_CTRL_11        0xfffe109c
+#define FUNC_MUX_CTRL_12        0xfffe10a0
+#define PU_PD_SEL_0             0xfffe10b4
+#define PU_PD_SEL_1             0xfffe10b8
+#define PU_PD_SEL_2             0xfffe10bc
+#define PU_PD_SEL_3             0xfffe10c0
+#define PU_PD_SEL_4             0xfffe10c4
+/* Timer32K for 1610 and 1710*/
+#define OMAP_TIMER32K_BASE      0xFFFBC400
+/*
+ * ---------------------------------------------------------------------------
+ * TIPB bus interface
+ * ---------------------------------------------------------------------------
+ */
+#define TIPB_PUBLIC_CNTL_BASE           0xfffed300
+#define MPU_PUBLIC_TIPB_CNTL            (TIPB_PUBLIC_CNTL_BASE + 0x8)
+#define TIPB_PRIVATE_CNTL_BASE          0xfffeca00
+#define MPU_PRIVATE_TIPB_CNTL           (TIPB_PRIVATE_CNTL_BASE + 0x8)
+/*
+ * ----------------------------------------------------------------------------
+ * MPUI interface
+ * ----------------------------------------------------------------------------
+ */
+#define MPUI_BASE                       (0xfffec900)
+#define MPUI_CTRL                       (MPUI_BASE + 0x0)
+#define MPUI_DEBUG_ADDR                 (MPUI_BASE + 0x4)
+#define MPUI_DEBUG_DATA                 (MPUI_BASE + 0x8)
+#define MPUI_DEBUG_FLAG                 (MPUI_BASE + 0xc)
+#define MPUI_STATUS_REG                 (MPUI_BASE + 0x10)
+#define MPUI_DSP_STATUS                 (MPUI_BASE + 0x14)
+#define MPUI_DSP_BOOT_CONFIG            (MPUI_BASE + 0x18)
+#define MPUI_DSP_API_CONFIG             (MPUI_BASE + 0x1c)
+/*
+ * ----------------------------------------------------------------------------
+ * LED Pulse Generator
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP_LPG1_BASE                  0xfffbd000
+#define OMAP_LPG2_BASE                  0xfffbd800
+#define OMAP_LPG1_LCR                   (OMAP_LPG1_BASE + 0x00)
+#define OMAP_LPG1_PMR                   (OMAP_LPG1_BASE + 0x04)
+#define OMAP_LPG2_LCR                   (OMAP_LPG2_BASE + 0x00)
+#define OMAP_LPG2_PMR                   (OMAP_LPG2_BASE + 0x04)
+/*
+ * ----------------------------------------------------------------------------
+ * Pulse-Width Light
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP_PWL_BASE                   0xfffb5800
+#define OMAP_PWL_ENABLE                 (OMAP_PWL_BASE + 0x00)
+#define OMAP_PWL_CLK_ENABLE             (OMAP_PWL_BASE + 0x04)
+/*
+ * ---------------------------------------------------------------------------
+ * Processor specific defines
+ * ---------------------------------------------------------------------------
+ */
+#include "omap7xx.h"
+#include "omap1510.h"
+#include "omap16xx.h"
+#endif  /* __ASM_ARCH_OMAP_HARDWARE_H */
diff --git a/arch/arm/mach-omap1/include/mach/irqs.h b/arch/arm/mach-omap1/include/mach/irqs.h
index 9292fdc1cb0b..729992d7d26a 100644
--- a/arch/arm/mach-omap1/include/mach/irqs.h
+++ b/arch/arm/mach-omap1/include/mach/irqs.h
@@ -1,5 +1,268 @@
 /*
- * arch/arm/mach-omap1/include/mach/irqs.h
+ *  arch/arm/plat-omap/include/mach/irqs.h
+ *
+ *  Copyright (C) Greg Lonnon 2001
+ *  Updated for OMAP-1610 by Tony Lindgren <tony@atomide.com>
+ *
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * NOTE: The interrupt vectors for the OMAP-1509, OMAP-1510, and OMAP-1610
+ *       are different.
 */
-#include <plat/irqs.h>
+#ifndef __ASM_ARCH_OMAP15XX_IRQS_H
+#define __ASM_ARCH_OMAP15XX_IRQS_H
+/*
+ * IRQ numbers for interrupt handler 1
+ *
+ * NOTE: See also the OMAP-1510 and 1610 specific IRQ numbers below
+ *
+ */
+#define INT_CAMERA              1
+#define INT_FIQ                 3
+#define INT_RTDX                6
+#define INT_DSP_MMU_ABORT       7
+#define INT_HOST                8
+#define INT_ABORT               9
+#define INT_BRIDGE_PRIV         13
+#define INT_GPIO_BANK1          14
+#define INT_UART3               15
+#define INT_TIMER3              16
+#define INT_DMA_CH0_6           19
+#define INT_DMA_CH1_7           20
+#define INT_DMA_CH2_8           21
+#define INT_DMA_CH3             22
+#define INT_DMA_CH4             23
+#define INT_DMA_CH5             24
+#define INT_TIMER1              26
+#define INT_WD_TIMER            27
+#define INT_BRIDGE_PUB          28
+#define INT_TIMER2              30
+#define INT_LCD_CTRL            31
+/*
+ * OMAP-1510 specific IRQ numbers for interrupt handler 1
+ */
+#define INT_1510_IH2_IRQ        0
+#define INT_1510_RES2           2
+#define INT_1510_SPI_TX         4
+#define INT_1510_SPI_RX         5
+#define INT_1510_DSP_MAILBOX1   10
+#define INT_1510_DSP_MAILBOX2   11
+#define INT_1510_RES12          12
+#define INT_1510_LB_MMU         17
+#define INT_1510_RES18          18
+#define INT_1510_LOCAL_BUS      29
+/*
+ * OMAP-1610 specific IRQ numbers for interrupt handler 1
+ */
+#define INT_1610_IH2_IRQ        INT_1510_IH2_IRQ
+#define INT_1610_IH2_FIQ        2
+#define INT_1610_McBSP2_TX      4
+#define INT_1610_McBSP2_RX      5
+#define INT_1610_DSP_MAILBOX1   10
+#define INT_1610_DSP_MAILBOX2   11
+#define INT_1610_LCD_LINE       12
+#define INT_1610_GPTIMER1       17
+#define INT_1610_GPTIMER2       18
+#define INT_1610_SSR_FIFO_0     29
+/*
+ * OMAP-7xx specific IRQ numbers for interrupt handler 1
+ */
+#define INT_7XX_IH2_FIQ         0
+#define INT_7XX_IH2_IRQ         1
+#define INT_7XX_USB_NON_ISO     2
+#define INT_7XX_USB_ISO         3
+#define INT_7XX_ICR             4
+#define INT_7XX_EAC             5
+#define INT_7XX_GPIO_BANK1      6
+#define INT_7XX_GPIO_BANK2      7
+#define INT_7XX_GPIO_BANK3      8
+#define INT_7XX_McBSP2TX        10
+#define INT_7XX_McBSP2RX        11
+#define INT_7XX_McBSP2RX_OVF    12
+#define INT_7XX_LCD_LINE        14
+#define INT_7XX_GSM_PROTECT     15
+#define INT_7XX_TIMER3          16
+#define INT_7XX_GPIO_BANK5      17
+#define INT_7XX_GPIO_BANK6      18
+#define INT_7XX_SPGIO_WR        29
+/*
+ * IRQ numbers for interrupt handler 2
+ *
+ * NOTE: See also the OMAP-1510 and 1610 specific IRQ numbers below
+ */
+#define IH2_BASE                32
+#define INT_KEYBOARD            (1 + IH2_BASE)
+#define INT_uWireTX             (2 + IH2_BASE)
+#define INT_uWireRX             (3 + IH2_BASE)
+#define INT_I2C                 (4 + IH2_BASE)
+#define INT_MPUIO               (5 + IH2_BASE)
+#define INT_USB_HHC_1           (6 + IH2_BASE)
+#define INT_McBSP3TX            (10 + IH2_BASE)
+#define INT_McBSP3RX            (11 + IH2_BASE)
+#define INT_McBSP1TX            (12 + IH2_BASE)
+#define INT_McBSP1RX            (13 + IH2_BASE)
+#define INT_UART1               (14 + IH2_BASE)
+#define INT_UART2               (15 + IH2_BASE)
+#define INT_BT_MCSI1TX          (16 + IH2_BASE)
+#define INT_BT_MCSI1RX          (17 + IH2_BASE)
+#define INT_SOSSI_MATCH         (19 + IH2_BASE)
+#define INT_USB_W2FC            (20 + IH2_BASE)
+#define INT_1WIRE               (21 + IH2_BASE)
+#define INT_OS_TIMER            (22 + IH2_BASE)
+#define INT_MMC                 (23 + IH2_BASE)
+#define INT_GAUGE_32K           (24 + IH2_BASE)
+#define INT_RTC_TIMER           (25 + IH2_BASE)
+#define INT_RTC_ALARM           (26 + IH2_BASE)
+#define INT_MEM_STICK           (27 + IH2_BASE)
+/*
+ * OMAP-1510 specific IRQ numbers for interrupt handler 2
+ */
+#define INT_1510_DSP_MMU        (28 + IH2_BASE)
+#define INT_1510_COM_SPI_RO     (31 + IH2_BASE)
+/*
+ * OMAP-1610 specific IRQ numbers for interrupt handler 2
+ */
+#define INT_1610_FAC            (0 + IH2_BASE)
+#define INT_1610_USB_HHC_2      (7 + IH2_BASE)
+#define INT_1610_USB_OTG        (8 + IH2_BASE)
+#define INT_1610_SoSSI          (9 + IH2_BASE)
+#define INT_1610_SoSSI_MATCH    (19 + IH2_BASE)
+#define INT_1610_DSP_MMU        (28 + IH2_BASE)
+#define INT_1610_McBSP2RX_OF    (31 + IH2_BASE)
+#define INT_1610_STI            (32 + IH2_BASE)
+#define INT_1610_STI_WAKEUP     (33 + IH2_BASE)
+#define INT_1610_GPTIMER3       (34 + IH2_BASE)
+#define INT_1610_GPTIMER4       (35 + IH2_BASE)
+#define INT_1610_GPTIMER5       (36 + IH2_BASE)
+#define INT_1610_GPTIMER6       (37 + IH2_BASE)
+#define INT_1610_GPTIMER7       (38 + IH2_BASE)
+#define INT_1610_GPTIMER8       (39 + IH2_BASE)
+#define INT_1610_GPIO_BANK2     (40 + IH2_BASE)
+#define INT_1610_GPIO_BANK3     (41 + IH2_BASE)
+#define INT_1610_MMC2           (42 + IH2_BASE)
+#define INT_1610_CF             (43 + IH2_BASE)
+#define INT_1610_WAKE_UP_REQ    (46 + IH2_BASE)
+#define INT_1610_GPIO_BANK4     (48 + IH2_BASE)
+#define INT_1610_SPI            (49 + IH2_BASE)
+#define INT_1610_DMA_CH6        (53 + IH2_BASE)
+#define INT_1610_DMA_CH7        (54 + IH2_BASE)
+#define INT_1610_DMA_CH8        (55 + IH2_BASE)
+#define INT_1610_DMA_CH9        (56 + IH2_BASE)
+#define INT_1610_DMA_CH10       (57 + IH2_BASE)
+#define INT_1610_DMA_CH11       (58 + IH2_BASE)
+#define INT_1610_DMA_CH12       (59 + IH2_BASE)
+#define INT_1610_DMA_CH13       (60 + IH2_BASE)
+#define INT_1610_DMA_CH14       (61 + IH2_BASE)
+#define INT_1610_DMA_CH15       (62 + IH2_BASE)
+#define INT_1610_NAND           (63 + IH2_BASE)
+#define INT_1610_SHA1MD5        (91 + IH2_BASE)
+/*
+ * OMAP-7xx specific IRQ numbers for interrupt handler 2
+ */
+#define INT_7XX_HW_ERRORS       (0 + IH2_BASE)
+#define INT_7XX_NFIQ_PWR_FAIL   (1 + IH2_BASE)
+#define INT_7XX_CFCD            (2 + IH2_BASE)
+#define INT_7XX_CFIREQ          (3 + IH2_BASE)
+#define INT_7XX_I2C             (4 + IH2_BASE)
+#define INT_7XX_PCC             (5 + IH2_BASE)
+#define INT_7XX_MPU_EXT_NIRQ    (6 + IH2_BASE)
+#define INT_7XX_SPI_100K_1      (7 + IH2_BASE)
+#define INT_7XX_SYREN_SPI       (8 + IH2_BASE)
+#define INT_7XX_VLYNQ           (9 + IH2_BASE)
+#define INT_7XX_GPIO_BANK4      (10 + IH2_BASE)
+#define INT_7XX_McBSP1TX        (11 + IH2_BASE)
+#define INT_7XX_McBSP1RX        (12 + IH2_BASE)
+#define INT_7XX_McBSP1RX_OF     (13 + IH2_BASE)
+#define INT_7XX_UART_MODEM_IRDA_2 (14 + IH2_BASE)
+#define INT_7XX_UART_MODEM_1    (15 + IH2_BASE)
+#define INT_7XX_MCSI            (16 + IH2_BASE)
+#define INT_7XX_uWireTX         (17 + IH2_BASE)
+#define INT_7XX_uWireRX         (18 + IH2_BASE)
+#define INT_7XX_SMC_CD          (19 + IH2_BASE)
+#define INT_7XX_SMC_IREQ        (20 + IH2_BASE)
+#define INT_7XX_HDQ_1WIRE       (21 + IH2_BASE)
+#define INT_7XX_TIMER32K        (22 + IH2_BASE)
+#define INT_7XX_MMC_SDIO        (23 + IH2_BASE)
+#define INT_7XX_UPLD            (24 + IH2_BASE)
+#define INT_7XX_USB_HHC_1       (27 + IH2_BASE)
+#define INT_7XX_USB_HHC_2       (28 + IH2_BASE)
+#define INT_7XX_USB_GENI        (29 + IH2_BASE)
+#define INT_7XX_USB_OTG         (30 + IH2_BASE)
+#define INT_7XX_CAMERA_IF       (31 + IH2_BASE)
+#define INT_7XX_RNG             (32 + IH2_BASE)
+#define INT_7XX_DUAL_MODE_TIMER (33 + IH2_BASE)
+#define INT_7XX_DBB_RF_EN       (34 + IH2_BASE)
+#define INT_7XX_MPUIO_KEYPAD    (35 + IH2_BASE)
+#define INT_7XX_SHA1_MD5        (36 + IH2_BASE)
+#define INT_7XX_SPI_100K_2      (37 + IH2_BASE)
+#define INT_7XX_RNG_IDLE        (38 + IH2_BASE)
+#define INT_7XX_MPUIO           (39 + IH2_BASE)
+#define INT_7XX_LLPC_LCD_CTRL_CAN_BE_OFF        (40 + IH2_BASE)
+#define INT_7XX_LLPC_OE_FALLING (41 + IH2_BASE)
+#define INT_7XX_LLPC_OE_RISING  (42 + IH2_BASE)
+#define INT_7XX_LLPC_VSYNC      (43 + IH2_BASE)
+#define INT_7XX_WAKE_UP_REQ     (46 + IH2_BASE)
+#define INT_7XX_DMA_CH6         (53 + IH2_BASE)
+#define INT_7XX_DMA_CH7         (54 + IH2_BASE)
+#define INT_7XX_DMA_CH8         (55 + IH2_BASE)
+#define INT_7XX_DMA_CH9         (56 + IH2_BASE)
+#define INT_7XX_DMA_CH10        (57 + IH2_BASE)
+#define INT_7XX_DMA_CH11        (58 + IH2_BASE)
+#define INT_7XX_DMA_CH12        (59 + IH2_BASE)
+#define INT_7XX_DMA_CH13        (60 + IH2_BASE)
+#define INT_7XX_DMA_CH14        (61 + IH2_BASE)
+#define INT_7XX_DMA_CH15        (62 + IH2_BASE)
+#define INT_7XX_NAND            (63 + IH2_BASE)
+/* Max. 128 level 2 IRQs (OMAP1610), 192 GPIOs (OMAP730/850) and
+ * 16 MPUIO lines */
+#define OMAP_MAX_GPIO_LINES     192
+#define IH_GPIO_BASE            (128 + IH2_BASE)
+#define IH_MPUIO_BASE           (OMAP_MAX_GPIO_LINES + IH_GPIO_BASE)
+#define OMAP_IRQ_END            (IH_MPUIO_BASE + 16)
+/* External FPGA handles interrupts on Innovator boards */
+#define OMAP_FPGA_IRQ_BASE      (OMAP_IRQ_END)
+#ifdef  CONFIG_MACH_OMAP_INNOVATOR
+#define OMAP_FPGA_NR_IRQS       24
+#else
+#define OMAP_FPGA_NR_IRQS       0
+#endif
+#define OMAP_FPGA_IRQ_END       (OMAP_FPGA_IRQ_BASE + OMAP_FPGA_NR_IRQS)
+#define NR_IRQS                 OMAP_FPGA_IRQ_END
+#define OMAP_IRQ_BIT(irq)       (1 << ((irq) % 32))
+#include <mach/hardware.h>
+#ifdef CONFIG_FIQ
+#define FIQ_START               1024
+#endif
+#endif
diff --git a/arch/arm/plat-omap/include/plat/omap1510.h b/arch/arm/mach-omap1/include/mach/omap1510.h
index d24004668138..8fe05d6137c0 100644
--- a/arch/arm/plat-omap/include/plat/omap1510.h
+++ b/arch/arm/mach-omap1/include/mach/omap1510.h
@@ -1,5 +1,4 @@
-/* arch/arm/plat-omap/include/mach/omap1510.h
+/*
- *
 * Hardware definitions for TI OMAP1510 processor.
 *
 * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com>
diff --git a/arch/arm/plat-omap/include/plat/omap16xx.h b/arch/arm/mach-omap1/include/mach/omap16xx.h
index e69e1d857b45..cd1c724869c7 100644
--- a/arch/arm/plat-omap/include/plat/omap16xx.h
+++ b/arch/arm/mach-omap1/include/mach/omap16xx.h
@@ -1,5 +1,4 @@
-/* arch/arm/plat-omap/include/mach/omap16xx.h
+/*
- *
 * Hardware definitions for TI OMAP1610/5912/1710 processors.
 *
 * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com>
diff --git a/arch/arm/plat-omap/include/plat/omap7xx.h b/arch/arm/mach-omap1/include/mach/omap7xx.h
index 48e4757e1e30..63da994bc609 100644
--- a/arch/arm/plat-omap/include/plat/omap7xx.h
+++ b/arch/arm/mach-omap1/include/mach/omap7xx.h
@@ -1,5 +1,4 @@
-/* arch/arm/plat-omap/include/mach/omap7xx.h
+/*
- *
 * Hardware definitions for TI OMAP7XX processor.
 *
 * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com>
diff --git a/arch/arm/mach-omap1/leds-h2p2-debug.c b/arch/arm/mach-omap1/leds-h2p2-debug.c
index f6b14a14a957..7f4bba9fa02e 100644
--- a/arch/arm/mach-omap1/leds-h2p2-debug.c
+++ b/arch/arm/mach-omap1/leds-h2p2-debug.c
@@ -14,6 +14,7 @@
 #include <linux/kernel_stat.h>
 #include <linux/sched.h>
 #include <linux/io.h>
+#include <linux/platform_data/gpio-omap.h>
 #include <mach/hardware.h>
 #include <asm/leds.h>
diff --git a/arch/arm/mach-omap1/leds.c b/arch/arm/mach-omap1/leds.c
index ae6dd93b8ddc..7b1a3833165d 100644
--- a/arch/arm/mach-omap1/leds.c
+++ b/arch/arm/mach-omap1/leds.c
@@ -6,6 +6,7 @@
 #include <linux/gpio.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/platform_data/gpio-omap.h>
 #include <asm/leds.h>
 #include <asm/mach-types.h>
diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c
index 6809c9e56c93..0d1709b1a6fe 100644
--- a/arch/arm/mach-omap1/serial.c
+++ b/arch/arm/mach-omap1/serial.c
@@ -22,7 +22,6 @@
 #include <asm/mach-types.h>
-#include <plat/board.h>
 #include <plat/mux.h>
 #include <plat/fpga.h>
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index e45bbffb7eec..c1309495eeb6 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -63,7 +63,7 @@ config ARCH_OMAP4
        select PM_OPP if PM
        select USB_ARCH_HAS_EHCI if USB_SUPPORT
        select ARM_CPU_SUSPEND if PM
-        select ARCH_NEEDS_CPU_IDLE_COUPLED
+        select ARCH_NEEDS_CPU_IDLE_COUPLED if SMP
 config SOC_OMAP5
        bool "TI OMAP5"
diff --git a/arch/arm/plat-omap/include/plat/am33xx.h b/arch/arm/mach-omap2/am33xx.h
index 06c19bb7bca6..06c19bb7bca6 100644
--- a/arch/arm/plat-omap/include/plat/am33xx.h
+++ b/arch/arm/mach-omap2/am33xx.h
diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
index 9511584fdc4f..0900eac57d56 100644
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -33,7 +33,6 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <plat/board.h>
 #include "common.h"
 #include <plat/gpmc.h>
 #include <plat/usb.h>
@@ -212,9 +211,6 @@ static struct regulator_init_data sdp2430_vmmc1 = {
 };
 static struct twl4030_gpio_platform_data sdp2430_gpio_data = {
-        .gpio_base      = OMAP_MAX_GPIO_LINES,
-        .irq_base       = TWL4030_GPIO_IRQ_BASE,
-        .irq_end        = TWL4030_GPIO_IRQ_END,
 };
 static struct twl4030_platform_data sdp2430_twldata = {
@@ -235,7 +231,7 @@ static int __init omap2430_i2c_init(void)
        sdp2430_i2c1_boardinfo[0].irq = gpio_to_irq(78);
        omap_register_i2c_bus(1, 100, sdp2430_i2c1_boardinfo,
                        ARRAY_SIZE(sdp2430_i2c1_boardinfo));
-        omap_pmic_init(2, 100, "twl4030", INT_24XX_SYS_NIRQ,
+        omap_pmic_init(2, 100, "twl4030", 7 + OMAP_INTC_START,
                        &sdp2430_twldata);
        return 0;
 }
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index a98c688058a9..5453173ff57b 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -25,13 +25,11 @@
 #include <linux/gpio.h>
 #include <linux/mmc/host.h>
-#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <plat/mcspi.h>
-#include <plat/board.h>
 #include <plat/usb.h>
 #include "common.h"
 #include <plat/dma.h>
@@ -191,9 +189,6 @@ static struct omap_dss_board_info sdp3430_dss_data = {
        .default_device = &sdp3430_lcd_device,
 };
-static struct omap_board_config_kernel sdp3430_config[] __initdata = {
-};
 static struct omap2_hsmmc_info mmc[] = {
        {
                .mmc            = 1,
@@ -233,9 +228,6 @@ static int sdp3430_twl_gpio_setup(struct device *dev,
 }
 static struct twl4030_gpio_platform_data sdp3430_gpio_data = {
-        .gpio_base      = OMAP_MAX_GPIO_LINES,
-        .irq_base       = TWL4030_GPIO_IRQ_BASE,
-        .irq_end        = TWL4030_GPIO_IRQ_END,
        .pulldowns      = BIT(2) | BIT(6) | BIT(8) | BIT(13)
                                | BIT(16) | BIT(17),
        .setup          = sdp3430_twl_gpio_setup,
@@ -576,8 +568,6 @@ static void __init omap_3430sdp_init(void)
        int gpio_pendown;
        omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
-        omap_board_config = sdp3430_config;
-        omap_board_config_size = ARRAY_SIZE(sdp3430_config);
        omap_hsmmc_init(mmc);
        omap3430_i2c_init();
        omap_display_init(&sdp3430_dss_data);
diff --git a/arch/arm/mach-omap2/board-3630sdp.c b/arch/arm/mach-omap2/board-3630sdp.c
index 2dc9ba523c7a..8518b1345988 100644
--- a/arch/arm/mach-omap2/board-3630sdp.c
+++ b/arch/arm/mach-omap2/board-3630sdp.c
@@ -17,7 +17,6 @@
 #include <asm/mach/arch.h>
 #include "common.h"
-#include <plat/board.h>
 #include <plat/gpmc-smc91x.h>
 #include <plat/usb.h>
@@ -67,9 +66,6 @@ static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
        .reset_gpio_port[2]  = -EINVAL
 };
-static struct omap_board_config_kernel sdp_config[] __initdata = {
-};
 #ifdef CONFIG_OMAP_MUX
 static struct omap_board_mux board_mux[] __initdata = {
        { .reg_offset = OMAP_MUX_TERMINATOR },
@@ -197,8 +193,6 @@ static struct flash_partitions sdp_flash_partitions[] = {
 static void __init omap_sdp_init(void)
 {
        omap3_mux_init(board_mux, OMAP_PACKAGE_CBP);
-        omap_board_config = sdp_config;
-        omap_board_config_size = ARRAY_SIZE(sdp_config);
        zoom_peripherals_init();
        omap_sdrc_init(h8mbx00u0mer0em_sdrc_params,
                                  h8mbx00u0mer0em_sdrc_params);
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index ad8a7d94afcd..db43e22526c0 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -28,13 +28,11 @@
 #include <linux/leds_pwm.h>
 #include <linux/platform_data/omap4-keypad.h>
-#include <mach/hardware.h>
 #include <asm/hardware/gic.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <plat/board.h>
 #include "common.h"
 #include <plat/usb.h>
 #include <plat/mmc.h>
@@ -45,6 +43,7 @@
 #include <linux/wl12xx.h>
 #include <linux/platform_data/omap-abe-twl6040.h>
+#include "soc.h"
 #include "mux.h"
 #include "hsmmc.h"
 #include "control.h"
@@ -544,7 +543,6 @@ static struct twl6040_platform_data twl6040_data = {
        .codec          = &twl6040_codec,
        .vibra          = &twl6040_vibra,
        .audpwron_gpio  = 127,
-        .irq_base       = TWL6040_CODEC_IRQ_BASE,
 };
 static struct twl4030_platform_data sdp4430_twldata = {
@@ -581,7 +579,7 @@ static int __init omap4_i2c_init(void)
                        TWL_COMMON_REGULATOR_V1V8 |
                        TWL_COMMON_REGULATOR_V2V1);
        omap4_pmic_init("twl6030", &sdp4430_twldata,
-                        &twl6040_data, OMAP44XX_IRQ_SYS_2N);
+                        &twl6040_data, 119 + OMAP44XX_IRQ_GIC_START);
        omap_register_i2c_bus(2, 400, NULL, 0);
        omap_register_i2c_bus(3, 400, sdp4430_i2c_3_boardinfo,
                                ARRAY_SIZE(sdp4430_i2c_3_boardinfo));
diff --git a/arch/arm/mach-omap2/board-am3517crane.c b/arch/arm/mach-omap2/board-am3517crane.c
index 92432c28673d..318feadb1d6e 100644
--- a/arch/arm/mach-omap2/board-am3517crane.c
+++ b/arch/arm/mach-omap2/board-am3517crane.c
@@ -21,12 +21,10 @@
 #include <linux/init.h>
 #include <linux/gpio.h>
-#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <plat/board.h>
 #include "common.h"
 #include <plat/usb.h>
@@ -37,11 +35,6 @@
 #define GPIO_USB_POWER          35
 #define GPIO_USB_NRESET         38
-/* Board initialization */
-static struct omap_board_config_kernel am3517_crane_config[] __initdata = {
-};
 #ifdef CONFIG_OMAP_MUX
 static struct omap_board_mux board_mux[] __initdata = {
        { .reg_offset = OMAP_MUX_TERMINATOR },
@@ -67,9 +60,6 @@ static void __init am3517_crane_init(void)
        omap_serial_init();
        omap_sdrc_init(NULL, NULL);
-        omap_board_config = am3517_crane_config;
-        omap_board_config_size = ARRAY_SIZE(am3517_crane_config);
        /* Configure GPIO for EHCI port */
        if (omap_mux_init_gpio(GPIO_USB_NRESET, OMAP_PIN_OUTPUT)) {
                pr_err("Can not configure mux for GPIO_USB_NRESET %d\n",
diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c
index 18f601096ce1..403d048a00ee 100644
--- a/arch/arm/mach-omap2/board-am3517evm.c
+++ b/arch/arm/mach-omap2/board-am3517evm.c
@@ -25,14 +25,13 @@
 #include <linux/can/platform/ti_hecc.h>
 #include <linux/davinci_emac.h>
 #include <linux/mmc/host.h>
+#include <linux/platform_data/gpio-omap.h>
-#include <mach/hardware.h>
 #include <mach/am35xx.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <plat/board.h>
 #include "common.h"
 #include <plat/usb.h>
 #include <video/omapdss.h>
@@ -296,8 +295,7 @@ static struct resource am3517_hecc_resources[] = {
                .flags  = IORESOURCE_MEM,
        },
        {
-                .start  = INT_35XX_HECC0_IRQ,
+                .start  = 24 + OMAP_INTC_START,
-                .end    = INT_35XX_HECC0_IRQ,
                .flags  = IORESOURCE_IRQ,
        },
 };
@@ -324,9 +322,6 @@ static void am3517_evm_hecc_init(struct ti_hecc_platform_data *pdata)
        platform_device_register(&am3517_hecc_device);
 }
-static struct omap_board_config_kernel am3517_evm_config[] __initdata = {
-};
 static struct omap2_hsmmc_info mmc[] = {
        {
                .mmc            = 1,
@@ -346,8 +341,6 @@ static struct omap2_hsmmc_info mmc[] = {
 static void __init am3517_evm_init(void)
 {
-        omap_board_config = am3517_evm_config;
-        omap_board_config_size = ARRAY_SIZE(am3517_evm_config);
        omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
        am3517_evm_i2c_init();
diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c
index e5fa46bfde2f..3e2d76f05af4 100644
--- a/arch/arm/mach-omap2/board-apollon.c
+++ b/arch/arm/mach-omap2/board-apollon.c
@@ -29,13 +29,11 @@
 #include <linux/smc91x.h>
 #include <linux/gpio.h>
-#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
 #include <plat/led.h>
-#include <plat/board.h>
 #include "common.h"
 #include <plat/gpmc.h>
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index 97d719047af3..34cb90471d96 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -23,6 +23,7 @@
 #include <linux/input/matrix_keypad.h>
 #include <linux/delay.h>
 #include <linux/gpio.h>
+#include <linux/platform_data/gpio-omap.h>
 #include <linux/i2c/at24.h>
 #include <linux/i2c/twl.h>
@@ -37,7 +38,6 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <plat/board.h>
 #include "common.h"
 #include <plat/nand.h>
 #include <plat/gpmc.h>
@@ -470,9 +470,6 @@ static int cm_t35_twl_gpio_setup(struct device *dev, unsigned gpio,
 }
 static struct twl4030_gpio_platform_data cm_t35_gpio_data = {
-        .gpio_base      = OMAP_MAX_GPIO_LINES,
-        .irq_base       = TWL4030_GPIO_IRQ_BASE,
-        .irq_end        = TWL4030_GPIO_IRQ_END,
        .setup          = cm_t35_twl_gpio_setup,
 };
@@ -714,13 +711,8 @@ static inline void cm_t35_init_mux(void) {}
 static inline void cm_t3730_init_mux(void) {}
 #endif
-static struct omap_board_config_kernel cm_t35_config[] __initdata = {
-};
 static void __init cm_t3x_common_init(void)
 {
-        omap_board_config = cm_t35_config;
-        omap_board_config_size = ARRAY_SIZE(cm_t35_config);
        omap3_mux_init(board_mux, OMAP_PACKAGE_CUS);
        omap_serial_init();
        omap_sdrc_init(mt46h32m32lf6_sdrc_params,
diff --git a/arch/arm/mach-omap2/board-cm-t3517.c b/arch/arm/mach-omap2/board-cm-t3517.c
index a33ad4641d9a..27a5450751ed 100644
--- a/arch/arm/mach-omap2/board-cm-t3517.c
+++ b/arch/arm/mach-omap2/board-cm-t3517.c
@@ -38,7 +38,6 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <plat/board.h>
 #include "common.h"
 #include <plat/usb.h>
 #include <plat/nand.h>
@@ -90,8 +89,7 @@ static struct resource cm_t3517_hecc_resources[] = {
                .flags  = IORESOURCE_MEM,
        },
        {
-                .start  = INT_35XX_HECC0_IRQ,
+                .start  = 24 + OMAP_INTC_START,
-                .end    = INT_35XX_HECC0_IRQ,
                .flags  = IORESOURCE_IRQ,
        },
 };
@@ -249,9 +247,6 @@ static void __init cm_t3517_init_nand(void)
 static inline void cm_t3517_init_nand(void) {}
 #endif
-static struct omap_board_config_kernel cm_t3517_config[] __initdata = {
-};
 #ifdef CONFIG_OMAP_MUX
 static struct omap_board_mux board_mux[] __initdata = {
        /* GPIO186 - Green LED */
@@ -285,8 +280,6 @@ static void __init cm_t3517_init(void)
        omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
        omap_serial_init();
        omap_sdrc_init(NULL, NULL);
-        omap_board_config = cm_t3517_config;
-        omap_board_config_size = ARRAY_SIZE(cm_t3517_config);
        cm_t3517_init_leds();
        cm_t3517_init_nand();
        cm_t3517_init_rtc();
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
index 6567c1cd5572..18b63ad56274 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -32,15 +32,12 @@
 #include <linux/regulator/machine.h>
 #include <linux/i2c/twl.h>
-#include <mach/hardware.h>
 #include <mach/id.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/flash.h>
-#include <plat/board.h>
 #include "common.h"
 #include <plat/gpmc.h>
 #include <plat/nand.h>
@@ -56,7 +53,6 @@
 #include <linux/interrupt.h>
 #include "sdram-micron-mt46h32m32lf-6.h"
 #include "mux.h"
 #include "hsmmc.h"
 #include "common-board-devices.h"
@@ -236,9 +232,6 @@ static int devkit8000_twl_gpio_setup(struct device *dev,
 }
 static struct twl4030_gpio_platform_data devkit8000_gpio_data = {
-        .gpio_base      = OMAP_MAX_GPIO_LINES,
-        .irq_base       = TWL4030_GPIO_IRQ_BASE,
-        .irq_end        = TWL4030_GPIO_IRQ_END,
        .use_leds       = true,
        .pulldowns      = BIT(1) | BIT(2) | BIT(6) | BIT(8) | BIT(13)
                                | BIT(15) | BIT(16) | BIT(17),
diff --git a/arch/arm/mach-omap2/board-flash.c b/arch/arm/mach-omap2/board-flash.c
index 53c39d239d6e..9017813f9abc 100644
--- a/arch/arm/mach-omap2/board-flash.c
+++ b/arch/arm/mach-omap2/board-flash.c
@@ -16,13 +16,14 @@
 #include <linux/platform_device.h>
 #include <linux/mtd/physmap.h>
 #include <linux/io.h>
-#include <plat/irqs.h>
+#include <plat/cpu.h>
 #include <plat/gpmc.h>
 #include <plat/nand.h>
 #include <plat/onenand.h>
 #include <plat/tc.h>
+#include "common.h"
 #include "board-flash.h"
 #define REG_FPGA_REV                    0x10
@@ -140,7 +141,6 @@ __init board_nand_init(struct mtd_partition *nand_parts,
        board_nand_data.devsize         = nand_type;
        board_nand_data.ecc_opt = OMAP_ECC_HAMMING_CODE_DEFAULT;
-        board_nand_data.gpmc_irq = OMAP_GPMC_IRQ_BASE + cs;
        gpmc_nand_init(&board_nand_data);
 }
 #endif /* CONFIG_MTD_NAND_OMAP2 || CONFIG_MTD_NAND_OMAP2_MODULE */
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index 6f93a20536ea..2ea7c577b295 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -16,11 +16,9 @@
 #include <linux/of_platform.h>
 #include <linux/irqdomain.h>
-#include <mach/hardware.h>
 #include <asm/hardware/gic.h>
 #include <asm/mach/arch.h>
-#include <plat/board.h>
 #include "common.h"
 #include "common-board-devices.h"
diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c
index ace20482e3e1..12569cb0eddd 100644
--- a/arch/arm/mach-omap2/board-h4.c
+++ b/arch/arm/mach-omap2/board-h4.c
@@ -27,20 +27,19 @@
 #include <linux/io.h>
 #include <linux/input/matrix_keypad.h>
-#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <plat/board.h>
-#include "common.h"
 #include <plat/menelaus.h>
 #include <plat/dma.h>
 #include <plat/gpmc.h>
+#include <plat/debug-devices.h>
 #include <video/omapdss.h>
 #include <video/omap-panel-generic-dpi.h>
+#include "common.h"
 #include "mux.h"
 #include "control.h"
diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
index 28214483aaba..8408bb2748a6 100644
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -29,10 +29,10 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <plat/board.h>
 #include "common.h"
 #include <plat/gpmc.h>
 #include <plat/usb.h>
 #include <video/omapdss.h>
 #include <video/omap-panel-tfp410.h>
 #include <plat/onenand.h>
@@ -425,9 +425,6 @@ static int igep_twl_gpio_setup(struct device *dev,
 };
 static struct twl4030_gpio_platform_data igep_twl4030_gpio_pdata = {
-        .gpio_base      = OMAP_MAX_GPIO_LINES,
-        .irq_base       = TWL4030_GPIO_IRQ_BASE,
-        .irq_end        = TWL4030_GPIO_IRQ_END,
        .use_leds       = true,
        .setup          = igep_twl_gpio_setup,
 };
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index ef9e82977499..3f3a552b1036 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -29,18 +29,14 @@
 #include <linux/smsc911x.h>
 #include <linux/mmc/host.h>
-#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <plat/mcspi.h>
-#include <plat/board.h>
 #include "common.h"
 #include <plat/gpmc.h>
 #include <mach/board-zoom.h>
-#include <asm/delay.h>
 #include <plat/usb.h>
 #include <plat/gpmc-smsc911x.h>
@@ -275,9 +271,6 @@ static int ldp_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio)
 }
 static struct twl4030_gpio_platform_data ldp_gpio_data = {
-        .gpio_base      = OMAP_MAX_GPIO_LINES,
-        .irq_base       = TWL4030_GPIO_IRQ_BASE,
-        .irq_end        = TWL4030_GPIO_IRQ_END,
        .setup          = ldp_twl_gpio_setup,
 };
diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c
index 677357ff61ac..d8deaea37dca 100644
--- a/arch/arm/mach-omap2/board-n8x0.c
+++ b/arch/arm/mach-omap2/board-n8x0.c
@@ -25,14 +25,11 @@
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
-#include <plat/board.h>
 #include "common.h"
 #include <plat/menelaus.h>
-#include <mach/irqs.h>
 #include <plat/mcspi.h>
 #include <plat/onenand.h>
 #include <plat/mmc.h>
-#include <plat/serial.h>
 #include "mux.h"
@@ -600,7 +597,7 @@ static struct menelaus_platform_data n8x0_menelaus_platform_data __initdata = {
 static struct i2c_board_info __initdata n8x0_i2c_board_info_1[] __initdata = {
        {
                I2C_BOARD_INFO("menelaus", 0x72),
-                .irq = INT_24XX_SYS_NIRQ,
+                .irq = 7 + OMAP_INTC_START,
                .platform_data = &n8x0_menelaus_platform_data,
        },
 };
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 6202fc76e490..801bcb4c5e22 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -33,13 +33,11 @@
 #include <linux/regulator/machine.h>
 #include <linux/i2c/twl.h>
-#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/flash.h>
-#include <plat/board.h>
 #include "common.h"
 #include <video/omapdss.h>
 #include <video/omap-panel-tfp410.h>
@@ -297,9 +295,6 @@ static int beagle_twl_gpio_setup(struct device *dev,
 }
 static struct twl4030_gpio_platform_data beagle_gpio_data = {
-        .gpio_base      = OMAP_MAX_GPIO_LINES,
-        .irq_base       = TWL4030_GPIO_IRQ_BASE,
-        .irq_end        = TWL4030_GPIO_IRQ_END,
        .use_leds       = true,
        .pullups        = BIT(1),
        .pulldowns      = BIT(2) | BIT(6) | BIT(7) | BIT(8) | BIT(13)
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index ef230a0eb5eb..b94873d0c6b6 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -40,12 +40,10 @@
 #include <linux/mmc/host.h>
 #include <linux/export.h>
-#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <plat/board.h>
 #include <plat/usb.h>
 #include <plat/nand.h>
 #include "common.h"
@@ -58,6 +56,7 @@
 #include "hsmmc.h"
 #include "common-board-devices.h"
+#define OMAP3_EVM_TS_GPIO       175
 #define OMAP3_EVM_EHCI_VBUS     22
 #define OMAP3_EVM_EHCI_SELECT   61
@@ -74,6 +73,18 @@
 #define OMAP3EVM_GEN1_ETHR_GPIO_RST     64
 #define OMAP3EVM_GEN2_ETHR_GPIO_RST     7
+/*
+ * OMAP35x EVM revision
+ * Run time detection of EVM revision is done by reading Ethernet
+ * PHY ID -
+ *      GEN_1   = 0x01150000
+ *      GEN_2   = 0x92200000
+ */
+enum {
+        OMAP3EVM_BOARD_GEN_1 = 0,       /* EVM Rev between  A - D */
+        OMAP3EVM_BOARD_GEN_2,           /* EVM Rev >= Rev E */
+};
 static u8 omap3_evm_version;
 u8 get_omap3_evm_rev(void)
@@ -376,9 +387,6 @@ static int omap3evm_twl_gpio_setup(struct device *dev,
 }
 static struct twl4030_gpio_platform_data omap3evm_gpio_data = {
-        .gpio_base      = OMAP_MAX_GPIO_LINES,
-        .irq_base       = TWL4030_GPIO_IRQ_BASE,
-        .irq_end        = TWL4030_GPIO_IRQ_END,
        .use_leds       = true,
        .setup          = omap3evm_twl_gpio_setup,
 };
@@ -525,9 +533,6 @@ static int __init omap3_evm_i2c_init(void)
        return 0;
 }
-static struct omap_board_config_kernel omap3_evm_config[] __initdata = {
-};
 static struct usbhs_omap_board_data usbhs_bdata __initdata = {
        .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
@@ -687,9 +692,6 @@ static void __init omap3_evm_init(void)
        obm = (cpu_is_omap3630()) ? omap36x_board_mux : omap35x_board_mux;
        omap3_mux_init(obm, OMAP_PACKAGE_CBB);
-        omap_board_config = omap3_evm_config;
-        omap_board_config_size = ARRAY_SIZE(omap3_evm_config);
        omap_mux_init_gpio(63, OMAP_PIN_INPUT);
        omap_hsmmc_init(mmc);
diff --git a/arch/arm/mach-omap2/board-omap3logic.c b/arch/arm/mach-omap2/board-omap3logic.c
index fca93d1afd43..b5e56fa83c19 100644
--- a/arch/arm/mach-omap2/board-omap3logic.c
+++ b/arch/arm/mach-omap2/board-omap3logic.c
@@ -30,24 +30,21 @@
 #include <linux/i2c/twl.h>
 #include <linux/mmc/host.h>
-#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include "mux.h"
-#include "hsmmc.h"
-#include "control.h"
-#include "common-board-devices.h"
-#include <plat/mux.h>
-#include <plat/board.h>
-#include "common.h"
 #include <plat/gpmc-smsc911x.h>
 #include <plat/gpmc.h>
 #include <plat/sdrc.h>
 #include <plat/usb.h>
+#include "common.h"
+#include "mux.h"
+#include "hsmmc.h"
+#include "control.h"
+#include "common-board-devices.h"
 #define OMAP3LOGIC_SMSC911X_CS                  1
 #define OMAP3530_LV_SOM_MMC_GPIO_CD             110
@@ -78,9 +75,6 @@ static struct regulator_init_data omap3logic_vmmc1 = {
 };
 static struct twl4030_gpio_platform_data omap3logic_gpio_data = {
-        .gpio_base      = OMAP_MAX_GPIO_LINES,
-        .irq_base       = TWL4030_GPIO_IRQ_BASE,
-        .irq_end        = TWL4030_GPIO_IRQ_END,
        .use_leds       = true,
        .pullups        = BIT(1),
        .pulldowns      = BIT(2)  | BIT(6)  | BIT(7)  | BIT(8)
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index 57aebee44fd0..e700a98feba6 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -40,9 +40,7 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <plat/board.h>
 #include "common.h"
-#include <mach/hardware.h>
 #include <plat/mcspi.h>
 #include <plat/usb.h>
 #include <video/omapdss.h>
@@ -321,9 +319,6 @@ static int omap3pandora_twl_gpio_setup(struct device *dev,
 }
 static struct twl4030_gpio_platform_data omap3pandora_gpio_data = {
-        .gpio_base      = OMAP_MAX_GPIO_LINES,
-        .irq_base       = TWL4030_GPIO_IRQ_BASE,
-        .irq_end        = TWL4030_GPIO_IRQ_END,
        .setup          = omap3pandora_twl_gpio_setup,
 };
diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c
index b318f5602e36..b8756f0d2a08 100644
--- a/arch/arm/mach-omap2/board-omap3stalker.c
+++ b/arch/arm/mach-omap2/board-omap3stalker.c
@@ -28,14 +28,17 @@
 #include <linux/regulator/machine.h>
 #include <linux/i2c/twl.h>
 #include <linux/mmc/host.h>
+#include <linux/input/matrix_keypad.h>
+#include <linux/spi/spi.h>
+#include <linux/interrupt.h>
+#include <linux/smsc911x.h>
+#include <linux/i2c/at24.h>
-#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/flash.h>
-#include <plat/board.h>
 #include "common.h"
 #include <plat/gpmc.h>
 #include <plat/nand.h>
@@ -279,9 +282,6 @@ omap3stalker_twl_gpio_setup(struct device *dev,
 }
 static struct twl4030_gpio_platform_data omap3stalker_gpio_data = {
-        .gpio_base      = OMAP_MAX_GPIO_LINES,
-        .irq_base       = TWL4030_GPIO_IRQ_BASE,
-        .irq_end        = TWL4030_GPIO_IRQ_END,
        .use_leds       = true,
        .setup          = omap3stalker_twl_gpio_setup,
 };
@@ -362,9 +362,6 @@ static int __init omap3_stalker_i2c_init(void)
 #define OMAP3_STALKER_TS_GPIO   175
-static struct omap_board_config_kernel omap3_stalker_config[] __initdata = {
-};
 static struct platform_device *omap3_stalker_devices[] __initdata = {
        &keys_gpio,
 };
@@ -399,8 +396,6 @@ static void __init omap3_stalker_init(void)
 {
        regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
        omap3_mux_init(board_mux, OMAP_PACKAGE_CUS);
-        omap_board_config = omap3_stalker_config;
-        omap_board_config_size = ARRAY_SIZE(omap3_stalker_config);
        omap_mux_init_gpio(23, OMAP_PIN_INPUT);
        omap_hsmmc_init(mmc);
diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c
index 485d14d6a8cd..0e2f838e4009 100644
--- a/arch/arm/mach-omap2/board-omap3touchbook.c
+++ b/arch/arm/mach-omap2/board-omap3touchbook.c
@@ -37,14 +37,12 @@
 #include <linux/regulator/machine.h>
 #include <linux/i2c/twl.h>
-#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/flash.h>
 #include <asm/system_info.h>
-#include <plat/board.h>
 #include "common.h"
 #include <plat/gpmc.h>
 #include <plat/nand.h>
@@ -139,9 +137,6 @@ static int touchbook_twl_gpio_setup(struct device *dev,
 }
 static struct twl4030_gpio_platform_data touchbook_gpio_data = {
-        .gpio_base      = OMAP_MAX_GPIO_LINES,
-        .irq_base       = TWL4030_GPIO_IRQ_BASE,
-        .irq_end        = TWL4030_GPIO_IRQ_END,
        .use_leds       = true,
        .pullups        = BIT(1),
        .pulldowns      = BIT(2) | BIT(6) | BIT(7) | BIT(8) | BIT(13)
diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
index 70f6d1d25463..45fe2d3f59b1 100644
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -32,19 +32,18 @@
 #include <linux/wl12xx.h>
 #include <linux/platform_data/omap-abe-twl6040.h>
-#include <mach/hardware.h>
 #include <asm/hardware/gic.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <video/omapdss.h>
-#include <plat/board.h>
 #include "common.h"
 #include <plat/usb.h>
 #include <plat/mmc.h>
 #include <video/omap-panel-tfp410.h>
+#include "soc.h"
 #include "hsmmc.h"
 #include "control.h"
 #include "mux.h"
@@ -263,7 +262,6 @@ static struct twl6040_codec_data twl6040_codec = {
 static struct twl6040_platform_data twl6040_data = {
        .codec          = &twl6040_codec,
        .audpwron_gpio  = 127,
-        .irq_base       = TWL6040_CODEC_IRQ_BASE,
 };
 /* Panda board uses the common PMIC configuration */
@@ -294,7 +292,7 @@ static int __init omap4_panda_i2c_init(void)
                        TWL_COMMON_REGULATOR_V1V8 |
                        TWL_COMMON_REGULATOR_V2V1);
        omap4_pmic_init("twl6030", &omap4_panda_twldata,
-                        &twl6040_data, OMAP44XX_IRQ_SYS_2N);
+                        &twl6040_data, 119 + OMAP44XX_IRQ_GIC_START);
        omap_register_i2c_bus(2, 400, NULL, 0);
        /*
         * Bus 3 is attached to the DVI port where devices like the pico DLP
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index 779734d8ba37..7a62d1322b7a 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -42,16 +42,13 @@
 #include <asm/mach/flash.h>
 #include <asm/mach/map.h>
-#include <plat/board.h>
 #include "common.h"
 #include <video/omapdss.h>
 #include <video/omap-panel-generic-dpi.h>
 #include <video/omap-panel-tfp410.h>
 #include <plat/gpmc.h>
-#include <mach/hardware.h>
 #include <plat/nand.h>
 #include <plat/mcspi.h>
-#include <plat/mux.h>
 #include <plat/usb.h>
 #include "mux.h"
@@ -399,9 +396,6 @@ static int overo_twl_gpio_setup(struct device *dev,
 }
 static struct twl4030_gpio_platform_data overo_gpio_data = {
-        .gpio_base      = OMAP_MAX_GPIO_LINES,
-        .irq_base       = TWL4030_GPIO_IRQ_BASE,
-        .irq_end        = TWL4030_GPIO_IRQ_END,
        .use_leds       = true,
        .setup          = overo_twl_gpio_setup,
 };
diff --git a/arch/arm/mach-omap2/board-rm680.c b/arch/arm/mach-omap2/board-rm680.c
index 0ad1bb3bdb98..00773a32524a 100644
--- a/arch/arm/mach-omap2/board-rm680.c
+++ b/arch/arm/mach-omap2/board-rm680.c
@@ -27,6 +27,7 @@
 #include <plat/gpmc.h>
 #include "common.h"
 #include <plat/onenand.h>
+#include <plat/serial.h>
 #include "mux.h"
 #include "hsmmc.h"
@@ -72,9 +73,6 @@ static struct platform_device *rm680_peripherals_devices[] __initdata = {
 /* TWL */
 static struct twl4030_gpio_platform_data rm680_gpio_data = {
-        .gpio_base              = OMAP_MAX_GPIO_LINES,
-        .irq_base               = TWL4030_GPIO_IRQ_BASE,
-        .irq_end                = TWL4030_GPIO_IRQ_END,
        .pullups                = BIT(0),
        .pulldowns              = BIT(1) | BIT(2) | BIT(8) | BIT(15),
 };
@@ -87,7 +85,7 @@ static struct twl4030_platform_data rm680_twl_data = {
 static void __init rm680_i2c_init(void)
 {
        omap3_pmic_get_config(&rm680_twl_data, TWL_COMMON_PDATA_USB, 0);
-        omap_pmic_init(1, 2900, "twl5031", INT_34XX_SYS_NIRQ, &rm680_twl_data);
+        omap_pmic_init(1, 2900, "twl5031", 7 + OMAP_INTC_START, &rm680_twl_data);
        omap_register_i2c_bus(2, 400, NULL, 0);
        omap_register_i2c_bus(3, 400, NULL, 0);
 }
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index df2534de3361..456049055daa 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -28,7 +28,6 @@
 #include <asm/system_info.h>
 #include <plat/mcspi.h>
-#include <plat/board.h>
 #include "common.h"
 #include <plat/dma.h>
 #include <plat/gpmc.h>
@@ -774,9 +773,6 @@ static int rx51_twlgpio_setup(struct device *dev, unsigned gpio, unsigned n)
 }
 static struct twl4030_gpio_platform_data rx51_gpio_data = {
-        .gpio_base              = OMAP_MAX_GPIO_LINES,
-        .irq_base               = TWL4030_GPIO_IRQ_BASE,
-        .irq_end                = TWL4030_GPIO_IRQ_END,
        .pulldowns              = BIT(0) | BIT(1) | BIT(2) | BIT(3)
                                | BIT(4) | BIT(5)
                                | BIT(8) | BIT(9) | BIT(10) | BIT(11)
@@ -1051,7 +1047,7 @@ static int __init rx51_i2c_init(void)
        rx51_twldata.vdac->constraints.apply_uV = true;
        rx51_twldata.vdac->constraints.name = "VDAC";
-        omap_pmic_init(1, 2200, "twl5030", INT_34XX_SYS_NIRQ, &rx51_twldata);
+        omap_pmic_init(1, 2200, "twl5030", 7 + OMAP_INTC_START, &rx51_twldata);
        omap_register_i2c_bus(2, 100, rx51_peripherals_i2c_board_info_2,
                              ARRAY_SIZE(rx51_peripherals_i2c_board_info_2));
 #if defined(CONFIG_SENSORS_LIS3_I2C) || defined(CONFIG_SENSORS_LIS3_I2C_MODULE)
diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c
index 345dd931f76f..93b466150002 100644
--- a/arch/arm/mach-omap2/board-rx51.c
+++ b/arch/arm/mach-omap2/board-rx51.c
@@ -18,13 +18,11 @@
 #include <linux/gpio.h>
 #include <linux/leds.h>
-#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <plat/mcspi.h>
-#include <plat/board.h>
 #include "common.h"
 #include <plat/dma.h>
 #include <plat/gpmc.h>
diff --git a/arch/arm/mach-omap2/board-ti8168evm.c b/arch/arm/mach-omap2/board-ti8168evm.c
index d4c8392cadb6..c4f8833b4c3c 100644
--- a/arch/arm/mach-omap2/board-ti8168evm.c
+++ b/arch/arm/mach-omap2/board-ti8168evm.c
@@ -15,13 +15,10 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <plat/irqs.h>
-#include <plat/board.h>
 #include "common.h"
 #include <plat/usb.h>
@@ -32,15 +29,10 @@ static struct omap_musb_board_data musb_board_data = {
        .power          = 500,
 };
-static struct omap_board_config_kernel ti81xx_evm_config[] __initdata = {
-};
 static void __init ti81xx_evm_init(void)
 {
        omap_serial_init();
        omap_sdrc_init(NULL, NULL);
-        omap_board_config = ti81xx_evm_config;
-        omap_board_config_size = ARRAY_SIZE(ti81xx_evm_config);
        usb_musb_init(&musb_board_data);
 }
diff --git a/arch/arm/mach-omap2/board-zoom-debugboard.c b/arch/arm/mach-omap2/board-zoom-debugboard.c
index f64f44173061..5ec069e529e7 100644
--- a/arch/arm/mach-omap2/board-zoom-debugboard.c
+++ b/arch/arm/mach-omap2/board-zoom-debugboard.c
@@ -22,6 +22,9 @@
 #include <mach/board-zoom.h>
+#include "soc.h"
+#include "common.h"
 #define ZOOM_SMSC911X_CS        7
 #define ZOOM_SMSC911X_GPIO      158
 #define ZOOM_QUADUART_CS        3
diff --git a/arch/arm/mach-omap2/board-zoom-display.c b/arch/arm/mach-omap2/board-zoom-display.c
index 28187f134fff..ea79bc299baf 100644
--- a/arch/arm/mach-omap2/board-zoom-display.c
+++ b/arch/arm/mach-omap2/board-zoom-display.c
@@ -18,6 +18,8 @@
 #include <video/omapdss.h>
 #include <mach/board-zoom.h>
+#include "common.h"
 #define LCD_PANEL_RESET_GPIO_PROD       96
 #define LCD_PANEL_RESET_GPIO_PILOT      55
 #define LCD_PANEL_QVGA_GPIO             56
diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c
index b797cb279618..6bcc107b9fc3 100644
--- a/arch/arm/mach-omap2/board-zoom-peripherals.c
+++ b/arch/arm/mach-omap2/board-zoom-peripherals.c
@@ -19,6 +19,7 @@
 #include <linux/regulator/fixed.h>
 #include <linux/wl12xx.h>
 #include <linux/mmc/host.h>
+#include <linux/platform_data/gpio-omap.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -251,9 +252,6 @@ static void zoom2_set_hs_extmute(int mute)
 }
 static struct twl4030_gpio_platform_data zoom_gpio_data = {
-        .gpio_base      = OMAP_MAX_GPIO_LINES,
-        .irq_base       = TWL4030_GPIO_IRQ_BASE,
-        .irq_end        = TWL4030_GPIO_IRQ_END,
        .setup          = zoom_twl_gpio_setup,
 };
@@ -281,7 +279,7 @@ static int __init omap_i2c_init(void)
                codec_data->hs_extmute = 1;
                codec_data->set_hs_extmute = zoom2_set_hs_extmute;
        }
-        omap_pmic_init(1, 2400, "twl5030", INT_34XX_SYS_NIRQ, &zoom_twldata);
+        omap_pmic_init(1, 2400, "twl5030", 7 + OMAP_INTC_START, &zoom_twldata);
        omap_register_i2c_bus(2, 400, NULL, 0);
        omap_register_i2c_bus(3, 400, NULL, 0);
        return 0;
diff --git a/arch/arm/mach-omap2/board-zoom.c b/arch/arm/mach-omap2/board-zoom.c
index 4e7e56142e6f..4994438e1f46 100644
--- a/arch/arm/mach-omap2/board-zoom.c
+++ b/arch/arm/mach-omap2/board-zoom.c
@@ -22,7 +22,6 @@
 #include <asm/mach/arch.h>
 #include "common.h"
-#include <plat/board.h>
 #include <plat/usb.h>
 #include <mach/board-zoom.h>
diff --git a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c
index 3d9d746b221a..cabcfdba5246 100644
--- a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c
+++ b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c
@@ -33,11 +33,11 @@
 #include <linux/cpufreq.h>
 #include <linux/slab.h>
-#include <plat/cpu.h>
 #include <plat/clock.h>
 #include <plat/sram.h>
 #include <plat/sdrc.h>
+#include "soc.h"
 #include "clock.h"
 #include "clock2xxx.h"
 #include "opp2xxx.h"
diff --git a/arch/arm/mach-omap2/clkt_dpll.c b/arch/arm/mach-omap2/clkt_dpll.c
index cd7fd0f91149..ae624c3b832a 100644
--- a/arch/arm/mach-omap2/clkt_dpll.c
+++ b/arch/arm/mach-omap2/clkt_dpll.c
@@ -22,8 +22,8 @@
 #include <asm/div64.h>
 #include <plat/clock.h>
-#include <plat/cpu.h>
+#include "soc.h"
 #include "clock.h"
 #include "cm-regbits-24xx.h"
 #include "cm-regbits-34xx.h"
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index ea3f565ba1a4..1a1f97f3ca69 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -22,14 +22,16 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/bitops.h>
-#include <trace/events/power.h>
 #include <asm/cpu.h>
 #include <plat/clock.h>
-#include "clockdomain.h"
-#include <plat/cpu.h>
 #include <plat/prcm.h>
+#include <trace/events/power.h>
+#include "soc.h"
+#include "clockdomain.h"
 #include "clock.h"
 #include "cm2xxx_3xxx.h"
 #include "cm-regbits-24xx.h"
diff --git a/arch/arm/mach-omap2/clock2420_data.c b/arch/arm/mach-omap2/clock2420_data.c
index 002745181ad6..12c178dbc9f5 100644
--- a/arch/arm/mach-omap2/clock2420_data.c
+++ b/arch/arm/mach-omap2/clock2420_data.c
@@ -18,9 +18,9 @@
 #include <linux/clk.h>
 #include <linux/list.h>
-#include <plat/hardware.h>
 #include <plat/clkdev_omap.h>
+#include "soc.h"
 #include "iomap.h"
 #include "clock.h"
 #include "clock2xxx.h"
diff --git a/arch/arm/mach-omap2/clock2430.c b/arch/arm/mach-omap2/clock2430.c
index dfda9a3f2cb2..a8e326177466 100644
--- a/arch/arm/mach-omap2/clock2430.c
+++ b/arch/arm/mach-omap2/clock2430.c
@@ -21,9 +21,9 @@
 #include <linux/clk.h>
 #include <linux/io.h>
-#include <plat/hardware.h>
 #include <plat/clock.h>
+#include "soc.h"
 #include "iomap.h"
 #include "clock.h"
 #include "clock2xxx.h"
diff --git a/arch/arm/mach-omap2/clock2430_data.c b/arch/arm/mach-omap2/clock2430_data.c
index cacabb070e22..02fe1f28affc 100644
--- a/arch/arm/mach-omap2/clock2430_data.c
+++ b/arch/arm/mach-omap2/clock2430_data.c
@@ -17,9 +17,9 @@
 #include <linux/clk.h>
 #include <linux/list.h>
-#include <plat/hardware.h>
 #include <plat/clkdev_omap.h>
+#include "soc.h"
 #include "iomap.h"
 #include "clock.h"
 #include "clock2xxx.h"
diff --git a/arch/arm/mach-omap2/clock2xxx.c b/arch/arm/mach-omap2/clock2xxx.c
index 12500097378d..e92be1fc1a00 100644
--- a/arch/arm/mach-omap2/clock2xxx.c
+++ b/arch/arm/mach-omap2/clock2xxx.c
@@ -22,9 +22,9 @@
 #include <linux/clk.h>
 #include <linux/io.h>
-#include <plat/cpu.h>
 #include <plat/clock.h>
+#include "soc.h"
 #include "clock.h"
 #include "clock2xxx.h"
 #include "cm.h"
diff --git a/arch/arm/mach-omap2/clock33xx_data.c b/arch/arm/mach-omap2/clock33xx_data.c
index 25bbcc7ca4dc..7aa5ecaee5a2 100644
--- a/arch/arm/mach-omap2/clock33xx_data.c
+++ b/arch/arm/mach-omap2/clock33xx_data.c
@@ -18,8 +18,8 @@
 #include <linux/list.h>
 #include <linux/clk.h>
 #include <plat/clkdev_omap.h>
-#include <plat/am33xx.h>
+#include "am33xx.h"
 #include "iomap.h"
 #include "control.h"
 #include "clock.h"
diff --git a/arch/arm/mach-omap2/clock3xxx.c b/arch/arm/mach-omap2/clock3xxx.c
index 794d82702c85..fc2765bcdd40 100644
--- a/arch/arm/mach-omap2/clock3xxx.c
+++ b/arch/arm/mach-omap2/clock3xxx.c
@@ -21,9 +21,9 @@
 #include <linux/clk.h>
 #include <linux/io.h>
-#include <plat/hardware.h>
 #include <plat/clock.h>
+#include "soc.h"
 #include "clock.h"
 #include "clock3xxx.h"
 #include "prm2xxx_3xxx.h"
diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c
index 83bed9ad3017..10a2398e1736 100644
--- a/arch/arm/mach-omap2/clock3xxx_data.c
+++ b/arch/arm/mach-omap2/clock3xxx_data.c
@@ -21,9 +21,9 @@
 #include <linux/list.h>
 #include <linux/io.h>
-#include <plat/hardware.h>
 #include <plat/clkdev_omap.h>
+#include "soc.h"
 #include "iomap.h"
 #include "clock.h"
 #include "clock3xxx.h"
diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c
index d7f55e43b761..500682c051c1 100644
--- a/arch/arm/mach-omap2/clock44xx_data.c
+++ b/arch/arm/mach-omap2/clock44xx_data.c
@@ -28,9 +28,9 @@
 #include <linux/clk.h>
 #include <linux/io.h>
-#include <plat/hardware.h>
 #include <plat/clkdev_omap.h>
+#include "soc.h"
 #include "iomap.h"
 #include "clock.h"
 #include "clock44xx.h"
diff --git a/arch/arm/mach-omap2/cm2xxx_3xxx.c b/arch/arm/mach-omap2/cm2xxx_3xxx.c
index 389f9f8b570c..a911e76b4ecf 100644
--- a/arch/arm/mach-omap2/cm2xxx_3xxx.c
+++ b/arch/arm/mach-omap2/cm2xxx_3xxx.c
@@ -18,8 +18,7 @@
 #include <linux/err.h>
 #include <linux/io.h>
-#include <plat/hardware.h>
+#include "soc.h"
 #include "iomap.h"
 #include "common.h"
 #include "cm.h"
diff --git a/arch/arm/mach-omap2/common-board-devices.c b/arch/arm/mach-omap2/common-board-devices.c
index 14734746457c..013fedc9e131 100644
--- a/arch/arm/mach-omap2/common-board-devices.c
+++ b/arch/arm/mach-omap2/common-board-devices.c
@@ -27,6 +27,7 @@
 #include <plat/mcspi.h>
 #include <plat/nand.h>
+#include "common.h"
 #include "common-board-devices.h"
 #if defined(CONFIG_TOUCHSCREEN_ADS7846) || \
@@ -35,16 +36,6 @@ static struct omap2_mcspi_device_config ads7846_mcspi_config = {
        .turbo_mode     = 0,
 };
-/*
- * ADS7846 driver maybe request a gpio according to the value
- * of pdata->get_pendown_state, but we have done this. So set
- * get_pendown_state to avoid twice gpio requesting.
- */
-static int omap3_get_pendown_state(void)
-{
-        return !gpio_get_value(OMAP3_EVM_TS_GPIO);
-}
 static struct ads7846_platform_data ads7846_config = {
        .x_max                  = 0x0fff,
        .y_max                  = 0x0fff,
@@ -55,7 +46,6 @@ static struct ads7846_platform_data ads7846_config = {
        .debounce_rep           = 1,
        .gpio_pendown           = -EINVAL,
        .keep_vref_on           = 1,
-        .get_pendown_state      = &omap3_get_pendown_state,
 };
 static struct spi_board_info ads7846_spi_board_info __initdata = {
diff --git a/arch/arm/mach-omap2/common-board-devices.h b/arch/arm/mach-omap2/common-board-devices.h
index 4c4ef6a6166b..a0b4a42836ab 100644
--- a/arch/arm/mach-omap2/common-board-devices.h
+++ b/arch/arm/mach-omap2/common-board-devices.h
@@ -4,7 +4,6 @@
 #include "twl-common.h"
 #define NAND_BLOCK_SIZE SZ_128K
-#define OMAP3_EVM_TS_GPIO       175
 struct mtd_partition;
 struct ads7846_platform_data;
diff --git a/arch/arm/mach-omap2/common.c b/arch/arm/mach-omap2/common.c
index 069f9725b1c3..8e43c4d885d5 100644
--- a/arch/arm/mach-omap2/common.c
+++ b/arch/arm/mach-omap2/common.c
@@ -17,11 +17,10 @@
 #include <linux/clk.h>
 #include <linux/io.h>
-#include <plat/hardware.h>
-#include <plat/board.h>
 #include <plat/mux.h>
 #include <plat/clock.h>
+#include "soc.h"
 #include "iomap.h"
 #include "common.h"
 #include "sdrc.h"
diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h
index 1f65b1871c23..da0f5c187353 100644
--- a/arch/arm/mach-omap2/common.h
+++ b/arch/arm/mach-omap2/common.h
@@ -26,11 +26,18 @@
 #define __ARCH_ARM_MACH_OMAP2PLUS_COMMON_H
 #ifndef __ASSEMBLER__
+#include <linux/irq.h>
 #include <linux/delay.h>
 #include <linux/i2c/twl.h>
-#include <plat/common.h>
 #include <asm/proc-fns.h>
+#include <plat/cpu.h>
+#include <plat/serial.h>
+#include <plat/common.h>
+#define OMAP_INTC_START         NR_IRQS
 #ifdef CONFIG_SOC_OMAP2420
 extern void omap242x_map_common_io(void);
 #else
diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c
index 3223b81e7532..d1ff8399a222 100644
--- a/arch/arm/mach-omap2/control.c
+++ b/arch/arm/mach-omap2/control.c
@@ -15,9 +15,9 @@
 #include <linux/kernel.h>
 #include <linux/io.h>
-#include <plat/hardware.h>
 #include <plat/sdrc.h>
+#include "soc.h"
 #include "iomap.h"
 #include "common.h"
 #include "cm-regbits-34xx.h"
diff --git a/arch/arm/mach-omap2/control.h b/arch/arm/mach-omap2/control.h
index b8cdc8531b60..c1a5cab0f236 100644
--- a/arch/arm/mach-omap2/control.h
+++ b/arch/arm/mach-omap2/control.h
@@ -21,7 +21,7 @@
 #include <mach/ctrl_module_pad_core_44xx.h>
 #include <mach/ctrl_module_pad_wkup_44xx.h>
-#include <plat/am33xx.h>
+#include "am33xx.h"
 #ifndef __ASSEMBLY__
 #define OMAP242X_CTRL_REGADDR(reg)                                      \
diff --git a/arch/arm/mach-omap2/cpuidle34xx.c b/arch/arm/mach-omap2/cpuidle34xx.c
index f2a49a48ef59..bc2756959be5 100644
--- a/arch/arm/mach-omap2/cpuidle34xx.c
+++ b/arch/arm/mach-omap2/cpuidle34xx.c
@@ -28,7 +28,6 @@
 #include <linux/cpu_pm.h>
 #include <plat/prcm.h>
-#include <plat/irqs.h>
 #include "powerdomain.h"
 #include "clockdomain.h"
diff --git a/arch/arm/mach-omap2/cpuidle44xx.c b/arch/arm/mach-omap2/cpuidle44xx.c
index ee05e193fc61..288bee6cbb76 100644
--- a/arch/arm/mach-omap2/cpuidle44xx.c
+++ b/arch/arm/mach-omap2/cpuidle44xx.c
@@ -238,8 +238,9 @@ int __init omap4_idle_init(void)
        for_each_cpu(cpu_id, cpu_online_mask) {
                dev = &per_cpu(omap4_idle_dev, cpu_id);
                dev->cpu = cpu_id;
+#ifdef CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED
                dev->coupled_cpus = *cpu_online_mask;
+#endif
                cpuidle_register_driver(&omap4_idle_driver);
                if (cpuidle_register_device(dev)) {
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index c00c68961bb8..1efa984b1a47 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -19,19 +19,18 @@
 #include <linux/of.h>
 #include <linux/platform_data/omap4-keypad.h>
-#include <mach/hardware.h>
-#include <mach/irqs.h>
 #include <asm/mach-types.h>
 #include <asm/mach/map.h>
 #include <asm/pmu.h>
 #include "iomap.h"
-#include <plat/board.h>
 #include <plat/dma.h>
 #include <plat/omap_hwmod.h>
 #include <plat/omap_device.h>
 #include <plat/omap4-keypad.h>
+#include "soc.h"
+#include "common.h"
 #include "mux.h"
 #include "control.h"
 #include "devices.h"
@@ -112,7 +111,7 @@ static struct resource omap2cam_resources[] = {
                .flags          = IORESOURCE_MEM,
        },
        {
-                .start          = INT_24XX_CAM_IRQ,
+                .start          = 24 + OMAP_INTC_START,
                .flags          = IORESOURCE_IRQ,
        }
 };
@@ -201,7 +200,7 @@ static struct resource omap3isp_resources[] = {
                .flags          = IORESOURCE_MEM,
        },
        {
-                .start          = INT_34XX_CAM_IRQ,
+                .start          = 24 + OMAP_INTC_START,
                .flags          = IORESOURCE_IRQ,
        }
 };
@@ -435,14 +434,12 @@ static inline void omap_init_mcspi(void) {}
 #endif
 static struct resource omap2_pmu_resource = {
-        .start  = 3,
+        .start  = 3 + OMAP_INTC_START,
-        .end    = 3,
        .flags  = IORESOURCE_IRQ,
 };
 static struct resource omap3_pmu_resource = {
-        .start  = INT_34XX_BENCH_MPU_EMUL,
+        .start  = 3 + OMAP_INTC_START,
-        .end    = INT_34XX_BENCH_MPU_EMUL,
        .flags  = IORESOURCE_IRQ,
 };
@@ -475,7 +472,7 @@ static struct resource omap2_sham_resources[] = {
                .flags  = IORESOURCE_MEM,
        },
        {
-                .start  = INT_24XX_SHA1MD5,
+                .start  = 51 + OMAP_INTC_START,
                .flags  = IORESOURCE_IRQ,
        }
 };
@@ -493,7 +490,7 @@ static struct resource omap3_sham_resources[] = {
                .flags  = IORESOURCE_MEM,
        },
        {
-                .start  = INT_34XX_SHA1MD52_IRQ,
+                .start  = 49 + OMAP_INTC_START,
                .flags  = IORESOURCE_IRQ,
        },
        {
diff --git a/arch/arm/mach-omap2/dpll3xxx.c b/arch/arm/mach-omap2/dpll3xxx.c
index b9c8d2f6a81f..d8318dc5ee91 100644
--- a/arch/arm/mach-omap2/dpll3xxx.c
+++ b/arch/arm/mach-omap2/dpll3xxx.c
@@ -28,9 +28,9 @@
 #include <linux/bitops.h>
 #include <linux/clkdev.h>
-#include <plat/cpu.h>
 #include <plat/clock.h>
+#include "soc.h"
 #include "clock.h"
 #include "cm2xxx_3xxx.h"
 #include "cm-regbits-34xx.h"
diff --git a/arch/arm/mach-omap2/dpll44xx.c b/arch/arm/mach-omap2/dpll44xx.c
index 9c6a296b3dc3..09d0ccccb861 100644
--- a/arch/arm/mach-omap2/dpll44xx.c
+++ b/arch/arm/mach-omap2/dpll44xx.c
@@ -15,9 +15,9 @@
 #include <linux/io.h>
 #include <linux/bitops.h>
-#include <plat/cpu.h>
 #include <plat/clock.h>
+#include "soc.h"
 #include "clock.h"
 #include "clock44xx.h"
 #include "cm-regbits-44xx.h"
diff --git a/arch/arm/mach-omap2/emu.c b/arch/arm/mach-omap2/emu.c
index e28e761b7ab9..b3566f68a559 100644
--- a/arch/arm/mach-omap2/emu.c
+++ b/arch/arm/mach-omap2/emu.c
@@ -21,8 +21,7 @@
 #include <linux/clk.h>
 #include <linux/err.h>
-#include <mach/hardware.h>
+#include "soc.h"
 #include "iomap.h"
 MODULE_LICENSE("GPL");
diff --git a/arch/arm/mach-omap2/gpio.c b/arch/arm/mach-omap2/gpio.c
index 9ad7d489b0de..7b52bdfc59c9 100644
--- a/arch/arm/mach-omap2/gpio.c
+++ b/arch/arm/mach-omap2/gpio.c
@@ -21,6 +21,7 @@
 #include <linux/slab.h>
 #include <linux/interrupt.h>
 #include <linux/of.h>
+#include <linux/platform_data/gpio-omap.h>
 #include <plat/omap_hwmod.h>
 #include <plat/omap_device.h>
diff --git a/arch/arm/mach-omap2/gpmc-nand.c b/arch/arm/mach-omap2/gpmc-nand.c
index 386dec8d2351..9e9f47ad6187 100644
--- a/arch/arm/mach-omap2/gpmc-nand.c
+++ b/arch/arm/mach-omap2/gpmc-nand.c
@@ -16,20 +16,28 @@
 #include <asm/mach/flash.h>
-#include <plat/cpu.h>
 #include <plat/nand.h>
-#include <plat/board.h>
 #include <plat/gpmc.h>
-static struct resource gpmc_nand_resource = {
+#include "soc.h"
-        .flags          = IORESOURCE_MEM,
+static struct resource gpmc_nand_resource[] = {
+        {
+                .flags          = IORESOURCE_MEM,
+        },
+        {
+                .flags          = IORESOURCE_IRQ,
+        },
+        {
+                .flags          = IORESOURCE_IRQ,
+        },
 };
 static struct platform_device gpmc_nand_device = {
        .name           = "omap2-nand",
        .id             = 0,
-        .num_resources  = 1,
+        .num_resources  = ARRAY_SIZE(gpmc_nand_resource),
-        .resource       = &gpmc_nand_resource,
+        .resource       = gpmc_nand_resource,
 };
 static int omap2_nand_gpmc_retime(struct omap_nand_platform_data *gpmc_nand_data)
@@ -75,6 +83,7 @@ static int omap2_nand_gpmc_retime(struct omap_nand_platform_data *gpmc_nand_data
                gpmc_cs_configure(gpmc_nand_data->cs, GPMC_CONFIG_DEV_SIZE, 0);
        gpmc_cs_configure(gpmc_nand_data->cs,
                        GPMC_CONFIG_DEV_TYPE, GPMC_DEVICETYPE_NAND);
+        gpmc_cs_configure(gpmc_nand_data->cs, GPMC_CONFIG_WP, 0);
        err = gpmc_cs_set_timings(gpmc_nand_data->cs, &t);
        if (err)
                return err;
@@ -90,12 +99,19 @@ int __init gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data)
        gpmc_nand_device.dev.platform_data = gpmc_nand_data;
        err = gpmc_cs_request(gpmc_nand_data->cs, NAND_IO_SIZE,
-                                &gpmc_nand_data->phys_base);
+                                (unsigned long *)&gpmc_nand_resource[0].start);
        if (err < 0) {
                dev_err(dev, "Cannot request GPMC CS\n");
                return err;
        }
+        gpmc_nand_resource[0].end = gpmc_nand_resource[0].start +
+                                                        NAND_IO_SIZE - 1;
+        gpmc_nand_resource[1].start =
+                                gpmc_get_client_irq(GPMC_IRQ_FIFOEVENTENABLE);
+        gpmc_nand_resource[2].start =
+                                gpmc_get_client_irq(GPMC_IRQ_COUNT_EVENT);
         /* Set timings in GPMC */
        err = omap2_nand_gpmc_retime(gpmc_nand_data);
        if (err < 0) {
@@ -108,6 +124,8 @@ int __init gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data)
                gpmc_cs_configure(gpmc_nand_data->cs, GPMC_CONFIG_RDY_BSY, 1);
        }
+        gpmc_update_nand_reg(&gpmc_nand_data->reg, gpmc_nand_data->cs);
        err = platform_device_register(&gpmc_nand_device);
        if (err < 0) {
                dev_err(dev, "Unable to register NAND device\n");
diff --git a/arch/arm/mach-omap2/gpmc-onenand.c b/arch/arm/mach-omap2/gpmc-onenand.c
index a0fa9bb2bda5..b66fb8e5faaa 100644
--- a/arch/arm/mach-omap2/gpmc-onenand.c
+++ b/arch/arm/mach-omap2/gpmc-onenand.c
@@ -18,16 +18,24 @@
 #include <asm/mach/flash.h>
-#include <plat/cpu.h>
 #include <plat/onenand.h>
-#include <plat/board.h>
 #include <plat/gpmc.h>
+#include "soc.h"
+#define ONENAND_IO_SIZE SZ_128K
 static struct omap_onenand_platform_data *gpmc_onenand_data;
+static struct resource gpmc_onenand_resource = {
+        .flags          = IORESOURCE_MEM,
+};
 static struct platform_device gpmc_onenand_device = {
        .name           = "omap2-onenand",
        .id             = -1,
+        .num_resources  = 1,
+        .resource       = &gpmc_onenand_resource,
 };
 static int omap2_onenand_set_async_mode(int cs, void __iomem *onenand_base)
@@ -390,6 +398,8 @@ static int gpmc_onenand_setup(void __iomem *onenand_base, int *freq_ptr)
 void __init gpmc_onenand_init(struct omap_onenand_platform_data *_onenand_data)
 {
+        int err;
        gpmc_onenand_data = _onenand_data;
        gpmc_onenand_data->onenand_setup = gpmc_onenand_setup;
        gpmc_onenand_device.dev.platform_data = gpmc_onenand_data;
@@ -401,8 +411,19 @@ void __init gpmc_onenand_init(struct omap_onenand_platform_data *_onenand_data)
                gpmc_onenand_data->flags |= ONENAND_SYNC_READ;
        }
+        err = gpmc_cs_request(gpmc_onenand_data->cs, ONENAND_IO_SIZE,
+                                (unsigned long *)&gpmc_onenand_resource.start);
+        if (err < 0) {
+                pr_err("%s: Cannot request GPMC CS\n", __func__);
+                return;
+        }
+        gpmc_onenand_resource.end = gpmc_onenand_resource.start +
+                                                        ONENAND_IO_SIZE - 1;
        if (platform_device_register(&gpmc_onenand_device) < 0) {
-                printk(KERN_ERR "Unable to register OneNAND device\n");
+                pr_err("%s: Unable to register OneNAND device\n", __func__);
+                gpmc_cs_free(gpmc_onenand_data->cs);
                return;
        }
 }
diff --git a/arch/arm/mach-omap2/gpmc-smc91x.c b/arch/arm/mach-omap2/gpmc-smc91x.c
index ba10c24f3d8d..245839dfc722 100644
--- a/arch/arm/mach-omap2/gpmc-smc91x.c
+++ b/arch/arm/mach-omap2/gpmc-smc91x.c
@@ -17,10 +17,11 @@
 #include <linux/io.h>
 #include <linux/smc91x.h>
-#include <plat/board.h>
 #include <plat/gpmc.h>
 #include <plat/gpmc-smc91x.h>
+#include "soc.h"
 static struct omap_smc91x_platform_data *gpmc_cfg;
 static struct resource gpmc_smc91x_resources[] = {
diff --git a/arch/arm/mach-omap2/gpmc-smsc911x.c b/arch/arm/mach-omap2/gpmc-smsc911x.c
index b6c77be3e8f7..a3a28878f0c9 100644
--- a/arch/arm/mach-omap2/gpmc-smsc911x.c
+++ b/arch/arm/mach-omap2/gpmc-smsc911x.c
@@ -20,7 +20,6 @@
 #include <linux/io.h>
 #include <linux/smsc911x.h>
-#include <plat/board.h>
 #include <plat/gpmc.h>
 #include <plat/gpmc-smsc911x.h>
diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index b2b5759ab0fe..055ae8bd943f 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -28,8 +28,13 @@
 #include <asm/mach-types.h>
 #include <plat/gpmc.h>
+#include <plat/cpu.h>
+#include <plat/gpmc.h>
 #include <plat/sdrc.h>
+#include "soc.h"
+#include "common.h"
 /* GPMC register offsets */
 #define GPMC_REVISION           0x00
 #define GPMC_SYSCONFIG          0x10
@@ -78,6 +83,15 @@
 #define ENABLE_PREFETCH         (0x1 << 7)
 #define DMA_MPU_MODE            2
+/* XXX: Only NAND irq has been considered,currently these are the only ones used
+ */
+#define GPMC_NR_IRQ             2
+struct gpmc_client_irq  {
+        unsigned                irq;
+        u32                     bitmask;
+};
 /* Structure to save gpmc cs context */
 struct gpmc_cs_config {
        u32 config1;
@@ -105,6 +119,10 @@ struct omap3_gpmc_regs {
        struct gpmc_cs_config cs_context[GPMC_CS_NUM];
 };
+static struct gpmc_client_irq gpmc_client_irq[GPMC_NR_IRQ];
+static struct irq_chip gpmc_irq_chip;
+static unsigned gpmc_irq_start;
 static struct resource  gpmc_mem_root;
 static struct resource  gpmc_cs_mem[GPMC_CS_NUM];
 static DEFINE_SPINLOCK(gpmc_mem_lock);
@@ -682,6 +700,117 @@ int gpmc_prefetch_reset(int cs)
 }
 EXPORT_SYMBOL(gpmc_prefetch_reset);
+void gpmc_update_nand_reg(struct gpmc_nand_regs *reg, int cs)
+{
+        reg->gpmc_status = gpmc_base + GPMC_STATUS;
+        reg->gpmc_nand_command = gpmc_base + GPMC_CS0_OFFSET +
+                                GPMC_CS_NAND_COMMAND + GPMC_CS_SIZE * cs;
+        reg->gpmc_nand_address = gpmc_base + GPMC_CS0_OFFSET +
+                                GPMC_CS_NAND_ADDRESS + GPMC_CS_SIZE * cs;
+        reg->gpmc_nand_data = gpmc_base + GPMC_CS0_OFFSET +
+                                GPMC_CS_NAND_DATA + GPMC_CS_SIZE * cs;
+        reg->gpmc_prefetch_config1 = gpmc_base + GPMC_PREFETCH_CONFIG1;
+        reg->gpmc_prefetch_config2 = gpmc_base + GPMC_PREFETCH_CONFIG2;
+        reg->gpmc_prefetch_control = gpmc_base + GPMC_PREFETCH_CONTROL;
+        reg->gpmc_prefetch_status = gpmc_base + GPMC_PREFETCH_STATUS;
+        reg->gpmc_ecc_config = gpmc_base + GPMC_ECC_CONFIG;
+        reg->gpmc_ecc_control = gpmc_base + GPMC_ECC_CONTROL;
+        reg->gpmc_ecc_size_config = gpmc_base + GPMC_ECC_SIZE_CONFIG;
+        reg->gpmc_ecc1_result = gpmc_base + GPMC_ECC1_RESULT;
+        reg->gpmc_bch_result0 = gpmc_base + GPMC_ECC_BCH_RESULT_0;
+}
+int gpmc_get_client_irq(unsigned irq_config)
+{
+        int i;
+        if (hweight32(irq_config) > 1)
+                return 0;
+        for (i = 0; i < GPMC_NR_IRQ; i++)
+                if (gpmc_client_irq[i].bitmask & irq_config)
+                        return gpmc_client_irq[i].irq;
+        return 0;
+}
+static int gpmc_irq_endis(unsigned irq, bool endis)
+{
+        int i;
+        u32 regval;
+        for (i = 0; i < GPMC_NR_IRQ; i++)
+                if (irq == gpmc_client_irq[i].irq) {
+                        regval = gpmc_read_reg(GPMC_IRQENABLE);
+                        if (endis)
+                                regval |= gpmc_client_irq[i].bitmask;
+                        else
+                                regval &= ~gpmc_client_irq[i].bitmask;
+                        gpmc_write_reg(GPMC_IRQENABLE, regval);
+                        break;
+                }
+        return 0;
+}
+static void gpmc_irq_disable(struct irq_data *p)
+{
+        gpmc_irq_endis(p->irq, false);
+}
+static void gpmc_irq_enable(struct irq_data *p)
+{
+        gpmc_irq_endis(p->irq, true);
+}
+static void gpmc_irq_noop(struct irq_data *data) { }
+static unsigned int gpmc_irq_noop_ret(struct irq_data *data) { return 0; }
+static int gpmc_setup_irq(int gpmc_irq)
+{
+        int i;
+        u32 regval;
+        if (!gpmc_irq)
+                return -EINVAL;
+        gpmc_irq_start = irq_alloc_descs(-1, 0, GPMC_NR_IRQ, 0);
+        if (IS_ERR_VALUE(gpmc_irq_start)) {
+                pr_err("irq_alloc_descs failed\n");
+                return gpmc_irq_start;
+        }
+        gpmc_irq_chip.name = "gpmc";
+        gpmc_irq_chip.irq_startup = gpmc_irq_noop_ret;
+        gpmc_irq_chip.irq_enable = gpmc_irq_enable;
+        gpmc_irq_chip.irq_disable = gpmc_irq_disable;
+        gpmc_irq_chip.irq_shutdown = gpmc_irq_noop;
+        gpmc_irq_chip.irq_ack = gpmc_irq_noop;
+        gpmc_irq_chip.irq_mask = gpmc_irq_noop;
+        gpmc_irq_chip.irq_unmask = gpmc_irq_noop;
+        gpmc_client_irq[0].bitmask = GPMC_IRQ_FIFOEVENTENABLE;
+        gpmc_client_irq[1].bitmask = GPMC_IRQ_COUNT_EVENT;
+        for (i = 0; i < GPMC_NR_IRQ; i++) {
+                gpmc_client_irq[i].irq = gpmc_irq_start + i;
+                irq_set_chip_and_handler(gpmc_client_irq[i].irq,
+                                        &gpmc_irq_chip, handle_simple_irq);
+                set_irq_flags(gpmc_client_irq[i].irq,
+                                IRQF_VALID | IRQF_NOAUTOEN);
+        }
+        /* Disable interrupts */
+        gpmc_write_reg(GPMC_IRQENABLE, 0);
+        /* clear interrupts */
+        regval = gpmc_read_reg(GPMC_IRQSTATUS);
+        gpmc_write_reg(GPMC_IRQSTATUS, regval);
+        return request_irq(gpmc_irq, gpmc_handle_irq, 0, "gpmc", NULL);
+}
 static void __init gpmc_mem_init(void)
 {
        int cs;
@@ -711,8 +840,8 @@ static void __init gpmc_mem_init(void)
 static int __init gpmc_init(void)
 {
-        u32 l, irq;
+        u32 l;
-        int cs, ret = -EINVAL;
+        int ret = -EINVAL;
        int gpmc_irq;
        char *ck = NULL;
@@ -722,16 +851,16 @@ static int __init gpmc_init(void)
                        l = OMAP2420_GPMC_BASE;
                else
                        l = OMAP34XX_GPMC_BASE;
-                gpmc_irq = INT_34XX_GPMC_IRQ;
+                gpmc_irq = 20 + OMAP_INTC_START;
        } else if (cpu_is_omap34xx()) {
                ck = "gpmc_fck";
                l = OMAP34XX_GPMC_BASE;
-                gpmc_irq = INT_34XX_GPMC_IRQ;
+                gpmc_irq = 20 + OMAP_INTC_START;
        } else if (cpu_is_omap44xx() || soc_is_omap54xx()) {
                /* Base address and irq number are same for OMAP4/5 */
                ck = "gpmc_ck";
                l = OMAP44XX_GPMC_BASE;
-                gpmc_irq = OMAP44XX_IRQ_GPMC;
+                gpmc_irq = 20 + OMAP44XX_IRQ_GIC_START;
        }
        if (WARN_ON(!ck))
@@ -761,16 +890,7 @@ static int __init gpmc_init(void)
        gpmc_write_reg(GPMC_SYSCONFIG, l);
        gpmc_mem_init();
-        /* initalize the irq_chained */
+        ret = gpmc_setup_irq(gpmc_irq);
-        irq = OMAP_GPMC_IRQ_BASE;
-        for (cs = 0; cs < GPMC_CS_NUM; cs++) {
-                irq_set_chip_and_handler(irq, &dummy_irq_chip,
-                                                handle_simple_irq);
-                set_irq_flags(irq, IRQF_VALID);
-                irq++;
-        }
-        ret = request_irq(gpmc_irq, gpmc_handle_irq, IRQF_SHARED, "gpmc", NULL);
        if (ret)
                pr_err("gpmc: irq-%d could not claim: err %d\n",
                                                gpmc_irq, ret);
@@ -780,12 +900,19 @@ postcore_initcall(gpmc_init);
 static irqreturn_t gpmc_handle_irq(int irq, void *dev)
 {
-        u8 cs;
+        int i;
+        u32 regval;
+        regval = gpmc_read_reg(GPMC_IRQSTATUS);
+        if (!regval)
+                return IRQ_NONE;
+        for (i = 0; i < GPMC_NR_IRQ; i++)
+                if (regval & gpmc_client_irq[i].bitmask)
+                        generic_handle_irq(gpmc_client_irq[i].irq);
-        /* check cs to invoke the irq */
+        gpmc_write_reg(GPMC_IRQSTATUS, regval);
-        cs = ((gpmc_read_reg(GPMC_PREFETCH_CONFIG1)) >> CS_NUM_SHIFT) & 0x7;
-        if (OMAP_GPMC_IRQ_BASE+cs <= OMAP_GPMC_IRQ_END)
-                generic_handle_irq(OMAP_GPMC_IRQ_BASE+cs);
        return IRQ_HANDLED;
 }
diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c
index a9675d8d1822..80399d740952 100644
--- a/arch/arm/mach-omap2/hsmmc.c
+++ b/arch/arm/mach-omap2/hsmmc.c
@@ -15,6 +15,8 @@
 #include <linux/delay.h>
 #include <linux/gpio.h>
 #include <mach/hardware.h>
+#include <linux/platform_data/gpio-omap.h>
 #include <plat/mmc.h>
 #include <plat/omap-pm.h>
 #include <plat/mux.h>
diff --git a/arch/arm/mach-omap2/i2c.c b/arch/arm/mach-omap2/i2c.c
index a12e224eb97d..fc57e67b321f 100644
--- a/arch/arm/mach-omap2/i2c.c
+++ b/arch/arm/mach-omap2/i2c.c
@@ -19,7 +19,6 @@
 *
 */
-#include <plat/cpu.h>
 #include <plat/i2c.h>
 #include "common.h"
 #include <plat/omap_hwmod.h>
diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
index 40373db649aa..7219df0e831a 100644
--- a/arch/arm/mach-omap2/id.c
+++ b/arch/arm/mach-omap2/id.c
@@ -22,10 +22,10 @@
 #include <asm/cputype.h>
 #include "common.h"
-#include <plat/cpu.h>
 #include <mach/id.h>
+#include "soc.h"
 #include "control.h"
 static unsigned int omap_revision;
diff --git a/arch/arm/mach-omap2/include/mach/gpio.h b/arch/arm/mach-omap2/include/mach/gpio.h
index be4d290d57ee..5621cc59c9f4 100644
--- a/arch/arm/mach-omap2/include/mach/gpio.h
+++ b/arch/arm/mach-omap2/include/mach/gpio.h
@@ -1,5 +1,3 @@
 /*
 * arch/arm/mach-omap2/include/mach/gpio.h
 */
-#include <plat/gpio.h>
diff --git a/arch/arm/mach-omap2/include/mach/hardware.h b/arch/arm/mach-omap2/include/mach/hardware.h
index 78edf9d33f71..54492dbf6973 100644
--- a/arch/arm/mach-omap2/include/mach/hardware.h
+++ b/arch/arm/mach-omap2/include/mach/hardware.h
@@ -1,5 +1,3 @@
 /*
 * arch/arm/mach-omap2/include/mach/hardware.h
 */
-#include <plat/hardware.h>
diff --git a/arch/arm/mach-omap2/include/mach/irqs.h b/arch/arm/mach-omap2/include/mach/irqs.h
index 44dab7725696..ba5282cafa42 100644
--- a/arch/arm/mach-omap2/include/mach/irqs.h
+++ b/arch/arm/mach-omap2/include/mach/irqs.h
@@ -1,5 +1,3 @@
 /*
 * arch/arm/mach-omap2/include/mach/irqs.h
 */
-#include <plat/irqs.h>
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 4d2d981ff5c5..0d79c23e9f88 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -33,6 +33,7 @@
 #include <plat/multi.h>
 #include <plat/dma.h>
+#include "soc.h"
 #include "iomap.h"
 #include "voltage.h"
 #include "powerdomain.h"
diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c
index bcd83db41bbc..efed4f540adb 100644
--- a/arch/arm/mach-omap2/irq.c
+++ b/arch/arm/mach-omap2/irq.c
@@ -23,8 +23,7 @@
 #include <linux/of_address.h>
 #include <linux/of_irq.h>
-#include <mach/hardware.h>
+#include "soc.h"
 #include "iomap.h"
 #include "common.h"
@@ -49,6 +48,8 @@
 #define OMAP3_IRQ_BASE          OMAP2_L4_IO_ADDRESS(OMAP34XX_IC_BASE)
 #define INTCPS_SIR_IRQ_OFFSET   0x0040  /* omap2/3 active interrupt offset */
 #define ACTIVEIRQ_MASK          0x7f    /* omap2/3 active interrupt bits */
+#define INTCPS_NR_MIR_REGS      3
+#define INTCPS_NR_IRQS          96
 /*
 * OMAP2 has a number of different interrupt controllers, each interrupt
diff --git a/arch/arm/mach-omap2/mailbox.c b/arch/arm/mach-omap2/mailbox.c
index 6875be837d9f..0d974565f8ca 100644
--- a/arch/arm/mach-omap2/mailbox.c
+++ b/arch/arm/mach-omap2/mailbox.c
@@ -16,8 +16,10 @@
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <linux/pm_runtime.h>
 #include <plat/mailbox.h>
-#include <mach/irqs.h>
+#include "soc.h"
 #define MAILBOX_REVISION                0x000
 #define MAILBOX_MESSAGE(m)              (0x040 + 4 * (m))
diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c
index 577cb77db26c..d493727632e9 100644
--- a/arch/arm/mach-omap2/mcbsp.c
+++ b/arch/arm/mach-omap2/mcbsp.c
@@ -18,9 +18,7 @@
 #include <linux/platform_device.h>
 #include <linux/slab.h>
-#include <mach/irqs.h>
 #include <plat/dma.h>
-#include <plat/cpu.h>
 #include <plat/mcbsp.h>
 #include <plat/omap_device.h>
 #include <linux/pm_runtime.h>
diff --git a/arch/arm/mach-omap2/msdi.c b/arch/arm/mach-omap2/msdi.c
index fb5bc6cf3773..9e57b4aadb06 100644
--- a/arch/arm/mach-omap2/msdi.c
+++ b/arch/arm/mach-omap2/msdi.c
@@ -23,6 +23,7 @@
 #include <linux/kernel.h>
 #include <linux/err.h>
+#include <linux/platform_data/gpio-omap.h>
 #include <plat/omap_hwmod.h>
 #include <plat/omap_device.h>
diff --git a/arch/arm/mach-omap2/mux.h b/arch/arm/mach-omap2/mux.h
index 471e62a74a16..76f9b3c2f586 100644
--- a/arch/arm/mach-omap2/mux.h
+++ b/arch/arm/mach-omap2/mux.h
@@ -127,7 +127,6 @@ struct omap_mux_partition {
 * @gpio:       GPIO number
 * @muxnames:   available signal modes for a ball
 * @balls:      available balls on the package
- * @partition:  mux partition
 */
 struct omap_mux {
        u16     reg_offset;
diff --git a/arch/arm/mach-omap2/omap-iommu.c b/arch/arm/mach-omap2/omap-iommu.c
index 1be8bcb52e93..df298d46707c 100644
--- a/arch/arm/mach-omap2/omap-iommu.c
+++ b/arch/arm/mach-omap2/omap-iommu.c
@@ -14,7 +14,9 @@
 #include <linux/platform_device.h>
 #include <plat/iommu.h>
-#include <plat/irqs.h>
+#include "soc.h"
+#include "common.h"
 struct iommu_device {
        resource_size_t base;
@@ -29,7 +31,7 @@ static int num_iommu_devices;
 static struct iommu_device omap3_devices[] = {
        {
                .base = 0x480bd400,
-                .irq = 24,
+                .irq = 24 + OMAP_INTC_START,
                .pdata = {
                        .name = "isp",
                        .nr_tlb_entries = 8,
@@ -41,7 +43,7 @@ static struct iommu_device omap3_devices[] = {
 #if defined(CONFIG_OMAP_IOMMU_IVA2)
        {
                .base = 0x5d000000,
-                .irq = 28,
+                .irq = 28 + OMAP_INTC_START,
                .pdata = {
                        .name = "iva2",
                        .nr_tlb_entries = 32,
@@ -64,7 +66,7 @@ static struct platform_device *omap3_iommu_pdev[NR_OMAP3_IOMMU_DEVICES];
 static struct iommu_device omap4_devices[] = {
        {
                .base = OMAP4_MMU1_BASE,
-                .irq = OMAP44XX_IRQ_DUCATI_MMU,
+                .irq = 100 + OMAP44XX_IRQ_GIC_START,
                .pdata = {
                        .name = "ducati",
                        .nr_tlb_entries = 32,
@@ -75,7 +77,7 @@ static struct iommu_device omap4_devices[] = {
        },
        {
                .base = OMAP4_MMU2_BASE,
-                .irq = OMAP44XX_IRQ_TESLA_MMU,
+                .irq = 28 + OMAP44XX_IRQ_GIC_START,
                .pdata = {
                        .name = "tesla",
                        .nr_tlb_entries = 32,
diff --git a/arch/arm/mach-omap2/omap-mpuss-lowpower.c b/arch/arm/mach-omap2/omap-mpuss-lowpower.c
index 637a1bdf2ac4..ff4e6a0e9c7c 100644
--- a/arch/arm/mach-omap2/omap-mpuss-lowpower.c
+++ b/arch/arm/mach-omap2/omap-mpuss-lowpower.c
@@ -50,9 +50,8 @@
 #include <asm/suspend.h>
 #include <asm/hardware/cache-l2x0.h>
-#include <plat/omap44xx.h>
 #include "common.h"
+#include "omap44xx.h"
 #include "omap4-sar-layout.h"
 #include "pm.h"
 #include "prcm_mpu44xx.h"
diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c
index 9a35adf91232..19cc5f504f7e 100644
--- a/arch/arm/mach-omap2/omap-smp.c
+++ b/arch/arm/mach-omap2/omap-smp.c
@@ -24,11 +24,11 @@
 #include <asm/hardware/gic.h>
 #include <asm/smp_scu.h>
-#include <mach/hardware.h>
 #include <mach/omap-secure.h>
 #include <mach/omap-wakeupgen.h>
 #include <asm/cputype.h>
+#include "soc.h"
 #include "iomap.h"
 #include "common.h"
 #include "clockdomain.h"
diff --git a/arch/arm/mach-omap2/omap-wakeupgen.c b/arch/arm/mach-omap2/omap-wakeupgen.c
index 05fdebfaa195..b54427dec2a3 100644
--- a/arch/arm/mach-omap2/omap-wakeupgen.c
+++ b/arch/arm/mach-omap2/omap-wakeupgen.c
@@ -30,6 +30,7 @@
 #include <mach/omap-wakeupgen.h>
 #include <mach/omap-secure.h>
+#include "soc.h"
 #include "omap4-sar-layout.h"
 #include "common.h"
diff --git a/arch/arm/plat-omap/include/plat/omap24xx.h b/arch/arm/mach-omap2/omap24xx.h
index 92df9e27cc5c..641a2c8d2eee 100644
--- a/arch/arm/plat-omap/include/plat/omap24xx.h
+++ b/arch/arm/mach-omap2/omap24xx.h
@@ -1,6 +1,4 @@
 /*
- * arch/arm/plat-omap/include/mach/omap24xx.h
- *
 * This file contains the processor specific definitions
 * of the TI OMAP24XX.
 *
diff --git a/arch/arm/plat-omap/include/plat/omap34xx.h b/arch/arm/mach-omap2/omap34xx.h
index 0d818acf3917..c0d1b4b1653f 100644
--- a/arch/arm/plat-omap/include/plat/omap34xx.h
+++ b/arch/arm/mach-omap2/omap34xx.h
@@ -1,6 +1,4 @@
 /*
- * arch/arm/plat-omap/include/mach/omap34xx.h
- *
 * This file contains the processor specific definitions of the TI OMAP34XX.
 *
 * Copyright (C) 2007 Texas Instruments.
diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c
index 6f95992f37c6..3cd2564ed5cd 100644
--- a/arch/arm/mach-omap2/omap4-common.c
+++ b/arch/arm/mach-omap2/omap4-common.c
@@ -16,27 +16,25 @@
 #include <linux/io.h>
 #include <linux/platform_device.h>
 #include <linux/memblock.h>
-#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <linux/export.h>
 #include <asm/hardware/gic.h>
 #include <asm/hardware/cache-l2x0.h>
 #include <asm/mach/map.h>
 #include <asm/memblock.h>
-#include <linux/of_irq.h>
-#include <linux/of_platform.h>
-#include <plat/irqs.h>
 #include <plat/sram.h>
 #include <plat/omap-secure.h>
 #include <plat/mmc.h>
-#include <mach/hardware.h>
 #include <mach/omap-wakeupgen.h>
+#include "soc.h"
 #include "common.h"
 #include "hsmmc.h"
 #include "omap4-sar-layout.h"
-#include <linux/export.h>
 #ifdef CONFIG_CACHE_L2X0
 static void __iomem *l2cache_base;
diff --git a/arch/arm/plat-omap/include/plat/omap44xx.h b/arch/arm/mach-omap2/omap44xx.h
index c0d478e55c84..43b927b2e2e8 100644
--- a/arch/arm/plat-omap/include/plat/omap44xx.h
+++ b/arch/arm/mach-omap2/omap44xx.h
@@ -39,12 +39,12 @@
 #define IRQ_SIR_IRQ                     0x0040
 #define OMAP44XX_GIC_DIST_BASE          0x48241000
 #define OMAP44XX_GIC_CPU_BASE           0x48240100
+#define OMAP44XX_IRQ_GIC_START          32
 #define OMAP44XX_SCU_BASE               0x48240000
 #define OMAP44XX_LOCAL_TWD_BASE         0x48240600
 #define OMAP44XX_L2CACHE_BASE           0x48242000
 #define OMAP44XX_WKUPGEN_BASE           0x48281000
 #define OMAP44XX_MCPDM_BASE             0x40132000
-#define OMAP44XX_MCPDM_L3_BASE          0x49032000
 #define OMAP44XX_SAR_RAM_BASE           0x4a326000
 #define OMAP44XX_MAILBOX_BASE           (L4_44XX_BASE + 0xF4000)
diff --git a/arch/arm/plat-omap/include/plat/omap54xx.h b/arch/arm/mach-omap2/omap54xx.h
index a2582bb3cab3..a2582bb3cab3 100644
--- a/arch/arm/plat-omap/include/plat/omap54xx.h
+++ b/arch/arm/mach-omap2/omap54xx.h
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index 7768804457e3..4c6b5a774054 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -139,14 +139,14 @@
 #include <linux/slab.h>
 #include <linux/bootmem.h>
-#include "common.h"
-#include <plat/cpu.h>
-#include "clockdomain.h"
-#include "powerdomain.h"
 #include <plat/clock.h>
 #include <plat/omap_hwmod.h>
 #include <plat/prcm.h>
+#include "soc.h"
+#include "common.h"
+#include "clockdomain.h"
+#include "powerdomain.h"
 #include "cm2xxx_3xxx.h"
 #include "cminst44xx.h"
 #include "prm2xxx_3xxx.h"
diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
index 50cfab61b0e2..4e81637640e9 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
@@ -13,12 +13,9 @@
 * XXX these should be marked initdata for multi-OMAP kernels
 */
 #include <plat/omap_hwmod.h>
-#include <mach/irqs.h>
-#include <plat/cpu.h>
 #include <plat/dma.h>
 #include <plat/serial.h>
 #include <plat/i2c.h>
-#include <plat/gpio.h>
 #include <plat/mcspi.h>
 #include <plat/dmtimer.h>
 #include <plat/l3_2xxx.h>
@@ -162,9 +159,9 @@ static struct omap_hwmod omap2420_dma_system_hwmod = {
 /* mailbox */
 static struct omap_hwmod_irq_info omap2420_mailbox_irqs[] = {
-        { .name = "dsp", .irq = 26 },
+        { .name = "dsp", .irq = 26 + OMAP_INTC_START, },
-        { .name = "iva", .irq = 34 },
+        { .name = "iva", .irq = 34 + OMAP_INTC_START, },
-        { .irq = -1 }
+        { .irq = -1 },
 };
 static struct omap_hwmod omap2420_mailbox_hwmod = {
@@ -199,9 +196,9 @@ static struct omap_hwmod_opt_clk mcbsp_opt_clks[] = {
 /* mcbsp1 */
 static struct omap_hwmod_irq_info omap2420_mcbsp1_irqs[] = {
-        { .name = "tx", .irq = 59 },
+        { .name = "tx", .irq = 59 + OMAP_INTC_START, },
-        { .name = "rx", .irq = 60 },
+        { .name = "rx", .irq = 60 + OMAP_INTC_START, },
-        { .irq = -1 }
+        { .irq = -1 },
 };
 static struct omap_hwmod omap2420_mcbsp1_hwmod = {
@@ -225,9 +222,9 @@ static struct omap_hwmod omap2420_mcbsp1_hwmod = {
 /* mcbsp2 */
 static struct omap_hwmod_irq_info omap2420_mcbsp2_irqs[] = {
-        { .name = "tx", .irq = 62 },
+        { .name = "tx", .irq = 62 + OMAP_INTC_START, },
-        { .name = "rx", .irq = 63 },
+        { .name = "rx", .irq = 63 + OMAP_INTC_START, },
-        { .irq = -1 }
+        { .irq = -1 },
 };
 static struct omap_hwmod omap2420_mcbsp2_hwmod = {
@@ -265,8 +262,8 @@ static struct omap_hwmod_class omap2420_msdi_hwmod_class = {
 /* msdi1 */
 static struct omap_hwmod_irq_info omap2420_msdi1_irqs[] = {
-        { .irq = 83 },
+        { .irq = 83 + OMAP_INTC_START, },
-        { .irq = -1 }
+        { .irq = -1 },
 };
 static struct omap_hwmod_dma_info omap2420_msdi1_sdma_reqs[] = {
diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
index 58b5bc196d32..ceb23c3fa89d 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
@@ -13,20 +13,17 @@
 * XXX these should be marked initdata for multi-OMAP kernels
 */
 #include <plat/omap_hwmod.h>
-#include <mach/irqs.h>
-#include <plat/cpu.h>
 #include <plat/dma.h>
 #include <plat/serial.h>
 #include <plat/i2c.h>
-#include <plat/gpio.h>
 #include <plat/mcbsp.h>
 #include <plat/mcspi.h>
 #include <plat/dmtimer.h>
 #include <plat/mmc.h>
 #include <plat/l3_2xxx.h>
+#include "soc.h"
 #include "omap_hwmod_common_data.h"
 #include "prm-regbits-24xx.h"
 #include "cm-regbits-24xx.h"
 #include "wd_timer.h"
@@ -133,8 +130,8 @@ static struct omap_hwmod omap2430_i2c2_hwmod = {
 /* gpio5 */
 static struct omap_hwmod_irq_info omap243x_gpio5_irqs[] = {
-        { .irq = 33 }, /* INT_24XX_GPIO_BANK5 */
+        { .irq = 33 + OMAP_INTC_START, }, /* INT_24XX_GPIO_BANK5 */
-        { .irq = -1 }
+        { .irq = -1 },
 };
 static struct omap_hwmod omap2430_gpio5_hwmod = {
@@ -173,8 +170,8 @@ static struct omap_hwmod omap2430_dma_system_hwmod = {
 /* mailbox */
 static struct omap_hwmod_irq_info omap2430_mailbox_irqs[] = {
-        { .irq = 26 },
+        { .irq = 26 + OMAP_INTC_START, },
-        { .irq = -1 }
+        { .irq = -1 },
 };
 static struct omap_hwmod omap2430_mailbox_hwmod = {
@@ -195,8 +192,8 @@ static struct omap_hwmod omap2430_mailbox_hwmod = {
 /* mcspi3 */
 static struct omap_hwmod_irq_info omap2430_mcspi3_mpu_irqs[] = {
-        { .irq = 91 },
+        { .irq = 91 + OMAP_INTC_START, },
-        { .irq = -1 }
+        { .irq = -1 },
 };
 static struct omap_hwmod_dma_info omap2430_mcspi3_sdma_reqs[] = {
@@ -250,9 +247,9 @@ static struct omap_hwmod_class usbotg_class = {
 /* usb_otg_hs */
 static struct omap_hwmod_irq_info omap2430_usbhsotg_mpu_irqs[] = {
-        { .name = "mc", .irq = 92 },
+        { .name = "mc", .irq = 92 + OMAP_INTC_START, },
-        { .name = "dma", .irq = 93 },
+        { .name = "dma", .irq = 93 + OMAP_INTC_START, },
-        { .irq = -1 }
+        { .irq = -1 },
 };
 static struct omap_hwmod omap2430_usbhsotg_hwmod = {
@@ -303,11 +300,11 @@ static struct omap_hwmod_opt_clk mcbsp_opt_clks[] = {
 /* mcbsp1 */
 static struct omap_hwmod_irq_info omap2430_mcbsp1_irqs[] = {
-        { .name = "tx",         .irq = 59 },
+        { .name = "tx",         .irq = 59 + OMAP_INTC_START, },
-        { .name = "rx",         .irq = 60 },
+        { .name = "rx",         .irq = 60 + OMAP_INTC_START, },
-        { .name = "ovr",        .irq = 61 },
+        { .name = "ovr",        .irq = 61 + OMAP_INTC_START, },
-        { .name = "common",     .irq = 64 },
+        { .name = "common",     .irq = 64 + OMAP_INTC_START, },
-        { .irq = -1 }
+        { .irq = -1 },
 };
 static struct omap_hwmod omap2430_mcbsp1_hwmod = {
@@ -331,10 +328,10 @@ static struct omap_hwmod omap2430_mcbsp1_hwmod = {
 /* mcbsp2 */
 static struct omap_hwmod_irq_info omap2430_mcbsp2_irqs[] = {
-        { .name = "tx",         .irq = 62 },
+        { .name = "tx",         .irq = 62 + OMAP_INTC_START, },
-        { .name = "rx",         .irq = 63 },
+        { .name = "rx",         .irq = 63 + OMAP_INTC_START, },
-        { .name = "common",     .irq = 16 },
+        { .name = "common",     .irq = 16 + OMAP_INTC_START, },
-        { .irq = -1 }
+        { .irq = -1 },
 };
 static struct omap_hwmod omap2430_mcbsp2_hwmod = {
@@ -358,10 +355,10 @@ static struct omap_hwmod omap2430_mcbsp2_hwmod = {
 /* mcbsp3 */
 static struct omap_hwmod_irq_info omap2430_mcbsp3_irqs[] = {
-        { .name = "tx",         .irq = 89 },
+        { .name = "tx",         .irq = 89 + OMAP_INTC_START, },
-        { .name = "rx",         .irq = 90 },
+        { .name = "rx",         .irq = 90 + OMAP_INTC_START, },
-        { .name = "common",     .irq = 17 },
+        { .name = "common",     .irq = 17 + OMAP_INTC_START, },
-        { .irq = -1 }
+        { .irq = -1 },
 };
 static struct omap_hwmod omap2430_mcbsp3_hwmod = {
@@ -385,10 +382,10 @@ static struct omap_hwmod omap2430_mcbsp3_hwmod = {
 /* mcbsp4 */
 static struct omap_hwmod_irq_info omap2430_mcbsp4_irqs[] = {
-        { .name = "tx",         .irq = 54 },
+        { .name = "tx",         .irq = 54 + OMAP_INTC_START, },
-        { .name = "rx",         .irq = 55 },
+        { .name = "rx",         .irq = 55 + OMAP_INTC_START, },
-        { .name = "common",     .irq = 18 },
+        { .name = "common",     .irq = 18 + OMAP_INTC_START, },
-        { .irq = -1 }
+        { .irq = -1 },
 };
 static struct omap_hwmod_dma_info omap2430_mcbsp4_sdma_chs[] = {
@@ -418,10 +415,10 @@ static struct omap_hwmod omap2430_mcbsp4_hwmod = {
 /* mcbsp5 */
 static struct omap_hwmod_irq_info omap2430_mcbsp5_irqs[] = {
-        { .name = "tx",         .irq = 81 },
+        { .name = "tx",         .irq = 81 + OMAP_INTC_START, },
-        { .name = "rx",         .irq = 82 },
+        { .name = "rx",         .irq = 82 + OMAP_INTC_START, },
-        { .name = "common",     .irq = 19 },
+        { .name = "common",     .irq = 19 + OMAP_INTC_START, },
-        { .irq = -1 }
+        { .irq = -1 },
 };
 static struct omap_hwmod_dma_info omap2430_mcbsp5_sdma_chs[] = {
@@ -468,8 +465,8 @@ static struct omap_hwmod_class omap2430_mmc_class = {
 /* MMC/SD/SDIO1 */
 static struct omap_hwmod_irq_info omap2430_mmc1_mpu_irqs[] = {
-        { .irq = 83 },
+        { .irq = 83 + OMAP_INTC_START, },
-        { .irq = -1 }
+        { .irq = -1 },
 };
 static struct omap_hwmod_dma_info omap2430_mmc1_sdma_reqs[] = {
@@ -509,8 +506,8 @@ static struct omap_hwmod omap2430_mmc1_hwmod = {
 /* MMC/SD/SDIO2 */
 static struct omap_hwmod_irq_info omap2430_mmc2_mpu_irqs[] = {
-        { .irq = 86 },
+        { .irq = 86 + OMAP_INTC_START, },
-        { .irq = -1 }
+        { .irq = -1 },
 };
 static struct omap_hwmod_dma_info omap2430_mmc2_sdma_reqs[] = {
diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c
index 102d76e9e9ea..bea700e928e7 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c
@@ -15,8 +15,6 @@
 #include <plat/common.h>
 #include <plat/hdq1w.h>
-#include <mach/irqs.h>
 #include "omap_hwmod_common_data.h"
 /* UART */
@@ -182,126 +180,126 @@ struct omap_hwmod_class iva_hwmod_class = {
 /* Common MPU IRQ line data */
 struct omap_hwmod_irq_info omap2_timer1_mpu_irqs[] = {
-        { .irq = 37, },
+        { .irq = 37 + OMAP_INTC_START, },
-        { .irq = -1 }
+        { .irq = -1 },
 };
 struct omap_hwmod_irq_info omap2_timer2_mpu_irqs[] = {
-        { .irq = 38, },
+        { .irq = 38 + OMAP_INTC_START, },
-        { .irq = -1 }
+        { .irq = -1 },
 };
 struct omap_hwmod_irq_info omap2_timer3_mpu_irqs[] = {
-        { .irq = 39, },
+        { .irq = 39 + OMAP_INTC_START, },
-        { .irq = -1 }
+        { .irq = -1 },
 };
 struct omap_hwmod_irq_info omap2_timer4_mpu_irqs[] = {
-        { .irq = 40, },
+        { .irq = 40 + OMAP_INTC_START, },
-        { .irq = -1 }
+        { .irq = -1 },
 };
 struct omap_hwmod_irq_info omap2_timer5_mpu_irqs[] = {
-        { .irq = 41, },
+        { .irq = 41 + OMAP_INTC_START, },
-        { .irq = -1 }
+        { .irq = -1 },
 };
 struct omap_hwmod_irq_info omap2_timer6_mpu_irqs[] = {
-        { .irq = 42, },
+        { .irq = 42 + OMAP_INTC_START, },
-        { .irq = -1 }
+        { .irq = -1 },
 };
 struct omap_hwmod_irq_info omap2_timer7_mpu_irqs[] = {
-        { .irq = 43, },
+        { .irq = 43 + OMAP_INTC_START, },
-        { .irq = -1 }
+        { .irq = -1 },
 };
 struct omap_hwmod_irq_info omap2_timer8_mpu_irqs[] = {
-        { .irq = 44, },
+        { .irq = 44 + OMAP_INTC_START, },
-        { .irq = -1 }
+        { .irq = -1 },
 };
 struct omap_hwmod_irq_info omap2_timer9_mpu_irqs[] = {
-        { .irq = 45, },
+        { .irq = 45 + OMAP_INTC_START, },
-        { .irq = -1 }
+        { .irq = -1 },
 };
 struct omap_hwmod_irq_info omap2_timer10_mpu_irqs[] = {
-        { .irq = 46, },
+        { .irq = 46 + OMAP_INTC_START, },
-        { .irq = -1 }
+        { .irq = -1 },
 };
 struct omap_hwmod_irq_info omap2_timer11_mpu_irqs[] = {
-        { .irq = 47, },
+        { .irq = 47 + OMAP_INTC_START, },
-        { .irq = -1 }
+        { .irq = -1 },
 };
 struct omap_hwmod_irq_info omap2_uart1_mpu_irqs[] = {
-        { .irq = INT_24XX_UART1_IRQ, },
+        { .irq = 72 + OMAP_INTC_START, },
-        { .irq = -1 }
+        { .irq = -1 },
 };
 struct omap_hwmod_irq_info omap2_uart2_mpu_irqs[] = {
-        { .irq = INT_24XX_UART2_IRQ, },
+        { .irq = 73 + OMAP_INTC_START, },
-        { .irq = -1 }
+        { .irq = -1 },
 };
 struct omap_hwmod_irq_info omap2_uart3_mpu_irqs[] = {
-        { .irq = INT_24XX_UART3_IRQ, },
+        { .irq = 74 + OMAP_INTC_START, },
-        { .irq = -1 }
+        { .irq = -1 },
 };
 struct omap_hwmod_irq_info omap2_dispc_irqs[] = {
-        { .irq = 25 },
+        { .irq = 25 + OMAP_INTC_START, },
-        { .irq = -1 }
+        { .irq = -1 },
 };
 struct omap_hwmod_irq_info omap2_i2c1_mpu_irqs[] = {
-        { .irq = INT_24XX_I2C1_IRQ, },
+        { .irq = 56 + OMAP_INTC_START, },
-        { .irq = -1 }
+        { .irq = -1 },
 };
 struct omap_hwmod_irq_info omap2_i2c2_mpu_irqs[] = {
-        { .irq = INT_24XX_I2C2_IRQ, },
+        { .irq = 57 + OMAP_INTC_START, },
-        { .irq = -1 }
+        { .irq = -1 },
 };
 struct omap_hwmod_irq_info omap2_gpio1_irqs[] = {
-        { .irq = 29 }, /* INT_24XX_GPIO_BANK1 */
+        { .irq = 29 + OMAP_INTC_START, }, /* INT_24XX_GPIO_BANK1 */
-        { .irq = -1 }
+        { .irq = -1 },
 };
 struct omap_hwmod_irq_info omap2_gpio2_irqs[] = {
-        { .irq = 30 }, /* INT_24XX_GPIO_BANK2 */
+        { .irq = 30 + OMAP_INTC_START, }, /* INT_24XX_GPIO_BANK2 */
-        { .irq = -1 }
+        { .irq = -1 },
 };
 struct omap_hwmod_irq_info omap2_gpio3_irqs[] = {
-        { .irq = 31 }, /* INT_24XX_GPIO_BANK3 */
+        { .irq = 31 + OMAP_INTC_START, }, /* INT_24XX_GPIO_BANK3 */
-        { .irq = -1 }
+        { .irq = -1 },
 };
 struct omap_hwmod_irq_info omap2_gpio4_irqs[] = {
-        { .irq = 32 }, /* INT_24XX_GPIO_BANK4 */
+        { .irq = 32 + OMAP_INTC_START, }, /* INT_24XX_GPIO_BANK4 */
-        { .irq = -1 }
+        { .irq = -1 },
 };
 struct omap_hwmod_irq_info omap2_dma_system_irqs[] = {
-        { .name = "0", .irq = 12 }, /* INT_24XX_SDMA_IRQ0 */
+        { .name = "0", .irq = 12 + OMAP_INTC_START, }, /* INT_24XX_SDMA_IRQ0 */
-        { .name = "1", .irq = 13 }, /* INT_24XX_SDMA_IRQ1 */
+        { .name = "1", .irq = 13 + OMAP_INTC_START, }, /* INT_24XX_SDMA_IRQ1 */
-        { .name = "2", .irq = 14 }, /* INT_24XX_SDMA_IRQ2 */
+        { .name = "2", .irq = 14 + OMAP_INTC_START, }, /* INT_24XX_SDMA_IRQ2 */
-        { .name = "3", .irq = 15 }, /* INT_24XX_SDMA_IRQ3 */
+        { .name = "3", .irq = 15 + OMAP_INTC_START, }, /* INT_24XX_SDMA_IRQ3 */
-        { .irq = -1 }
+        { .irq = -1 },
 };
 struct omap_hwmod_irq_info omap2_mcspi1_mpu_irqs[] = {
-        { .irq = 65 },
+        { .irq = 65 + OMAP_INTC_START, },
-        { .irq = -1 }
+        { .irq = -1 },
 };
 struct omap_hwmod_irq_info omap2_mcspi2_mpu_irqs[] = {
-        { .irq = 66 },
+        { .irq = 66 + OMAP_INTC_START, },
-        { .irq = -1 }
+        { .irq = -1 },
 };
 struct omap_hwmod_class_sysconfig omap2_hdq1w_sysc = {
@@ -320,7 +318,7 @@ struct omap_hwmod_class omap2_hdq1w_class = {
 };
 struct omap_hwmod_irq_info omap2_hdq1w_mpu_irqs[] = {
-        { .irq = 58, },
+        { .irq = 58 + OMAP_INTC_START, },
-        { .irq = -1 }
+        { .irq = -1 },
 };
diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
index afad69c6ba6e..ceb305242340 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
@@ -10,21 +10,19 @@
 */
 #include <plat/omap_hwmod.h>
 #include <plat/serial.h>
-#include <plat/gpio.h>
+#include <linux/platform_data/gpio-omap.h>
 #include <plat/dma.h>
 #include <plat/dmtimer.h>
 #include <plat/mcspi.h>
-#include <mach/irqs.h>
 #include "omap_hwmod_common_data.h"
 #include "cm-regbits-24xx.h"
 #include "prm-regbits-24xx.h"
 #include "wd_timer.h"
 struct omap_hwmod_irq_info omap2xxx_timer12_mpu_irqs[] = {
-        { .irq = 48, },
+        { .irq = 48 + OMAP_INTC_START, },
-        { .irq = -1 }
+        { .irq = -1 },
 };
 struct omap_hwmod_dma_info omap2xxx_dss_sdma_chs[] = {
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index c9e38200216b..75fbbac13921 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -15,26 +15,26 @@
 * XXX these should be marked initdata for multi-OMAP kernels
 */
 #include <linux/power/smartreflex.h>
+#include <linux/platform_data/gpio-omap.h>
 #include <plat/omap_hwmod.h>
-#include <mach/irqs.h>
-#include <plat/cpu.h>
 #include <plat/dma.h>
 #include <plat/serial.h>
 #include <plat/l3_3xxx.h>
 #include <plat/l4_3xxx.h>
 #include <plat/i2c.h>
-#include <plat/gpio.h>
 #include <plat/mmc.h>
 #include <plat/mcbsp.h>
 #include <plat/mcspi.h>
 #include <plat/dmtimer.h>
+#include <mach/am35xx.h>
+#include "soc.h"
 #include "omap_hwmod_common_data.h"
 #include "prm-regbits-34xx.h"
 #include "cm-regbits-34xx.h"
 #include "wd_timer.h"
-#include <mach/am35xx.h>
 /*
 * OMAP3xxx hardware module integration data
@@ -51,9 +51,9 @@
 /* L3 */
 static struct omap_hwmod_irq_info omap3xxx_l3_main_irqs[] = {
-        { .irq = INT_34XX_L3_DBG_IRQ },
+        { .irq = 9 + OMAP_INTC_START, },
-        { .irq = INT_34XX_L3_APP_IRQ },
+        { .irq = 10 + OMAP_INTC_START, },
-        { .irq = -1 }
+        { .irq = -1 },
 };
 static struct omap_hwmod omap3xxx_l3_main_hwmod = {
@@ -355,8 +355,8 @@ static struct omap_hwmod omap3xxx_timer11_hwmod = {
 /* timer12 */
 static struct omap_hwmod_irq_info omap3xxx_timer12_mpu_irqs[] = {
-        { .irq = 95, },
+        { .irq = 95 + OMAP_INTC_START, },
-        { .irq = -1 }
+        { .irq = -1 },
 };
 static struct omap_hwmod omap3xxx_timer12_hwmod = {
@@ -490,8 +490,8 @@ static struct omap_hwmod omap3xxx_uart3_hwmod = {
 /* UART4 */
 static struct omap_hwmod_irq_info uart4_mpu_irqs[] = {
-        { .irq = INT_36XX_UART4_IRQ, },
+        { .irq = 80 + OMAP_INTC_START, },
-        { .irq = -1 }
+        { .irq = -1 },
 };
 static struct omap_hwmod_dma_info uart4_sdma_reqs[] = {
@@ -518,8 +518,8 @@ static struct omap_hwmod omap36xx_uart4_hwmod = {
 };
 static struct omap_hwmod_irq_info am35xx_uart4_mpu_irqs[] = {
-        { .irq = INT_35XX_UART4_IRQ, },
+        { .irq = 84 + OMAP_INTC_START, },
-        { .irq = -1 }
+        { .irq = -1 },
 };
 static struct omap_hwmod_dma_info am35xx_uart4_sdma_reqs[] = {
@@ -674,8 +674,8 @@ static struct omap_hwmod_class omap3xxx_dsi_hwmod_class = {
 };
 static struct omap_hwmod_irq_info omap3xxx_dsi1_irqs[] = {
-        { .irq = 25 },
+        { .irq = 25 + OMAP_INTC_START, },
-        { .irq = -1 }
+        { .irq = -1 },
 };
 /* dss_dsi1 */
@@ -804,8 +804,8 @@ static struct omap_i2c_dev_attr i2c3_dev_attr = {
 };
 static struct omap_hwmod_irq_info i2c3_mpu_irqs[] = {
-        { .irq = INT_34XX_I2C3_IRQ, },
+        { .irq = 61 + OMAP_INTC_START, },
-        { .irq = -1 }
+        { .irq = -1 },
 };
 static struct omap_hwmod_dma_info i2c3_sdma_reqs[] = {
@@ -963,8 +963,8 @@ static struct omap_hwmod omap3xxx_gpio4_hwmod = {
 /* gpio5 */
 static struct omap_hwmod_irq_info omap3xxx_gpio5_irqs[] = {
-        { .irq = 33 }, /* INT_34XX_GPIO_BANK5 */
+        { .irq = 33 + OMAP_INTC_START, }, /* INT_34XX_GPIO_BANK5 */
-        { .irq = -1 }
+        { .irq = -1 },
 };
 static struct omap_hwmod_opt_clk gpio5_opt_clks[] = {
@@ -993,8 +993,8 @@ static struct omap_hwmod omap3xxx_gpio5_hwmod = {
 /* gpio6 */
 static struct omap_hwmod_irq_info omap3xxx_gpio6_irqs[] = {
-        { .irq = 34 }, /* INT_34XX_GPIO_BANK6 */
+        { .irq = 34 + OMAP_INTC_START, }, /* INT_34XX_GPIO_BANK6 */
-        { .irq = -1 }
+        { .irq = -1 },
 };
 static struct omap_hwmod_opt_clk gpio6_opt_clks[] = {
@@ -1098,10 +1098,10 @@ static struct omap_hwmod_opt_clk mcbsp234_opt_clks[] = {
 /* mcbsp1 */
 static struct omap_hwmod_irq_info omap3xxx_mcbsp1_irqs[] = {
-        { .name = "common", .irq = 16 },
+        { .name = "common", .irq = 16 + OMAP_INTC_START, },
-        { .name = "tx", .irq = 59 },
+        { .name = "tx", .irq = 59 + OMAP_INTC_START, },
-        { .name = "rx", .irq = 60 },
+        { .name = "rx", .irq = 60 + OMAP_INTC_START, },
-        { .irq = -1 }
+        { .irq = -1 },
 };
 static struct omap_hwmod omap3xxx_mcbsp1_hwmod = {
@@ -1125,10 +1125,10 @@ static struct omap_hwmod omap3xxx_mcbsp1_hwmod = {
 /* mcbsp2 */
 static struct omap_hwmod_irq_info omap3xxx_mcbsp2_irqs[] = {
-        { .name = "common", .irq = 17 },
+        { .name = "common", .irq = 17 + OMAP_INTC_START, },
-        { .name = "tx", .irq = 62 },
+        { .name = "tx", .irq = 62 + OMAP_INTC_START, },
-        { .name = "rx", .irq = 63 },
+        { .name = "rx", .irq = 63 + OMAP_INTC_START, },
-        { .irq = -1 }
+        { .irq = -1 },
 };
 static struct omap_mcbsp_dev_attr omap34xx_mcbsp2_dev_attr = {
@@ -1157,10 +1157,10 @@ static struct omap_hwmod omap3xxx_mcbsp2_hwmod = {
 /* mcbsp3 */
 static struct omap_hwmod_irq_info omap3xxx_mcbsp3_irqs[] = {
-        { .name = "common", .irq = 22 },
+        { .name = "common", .irq = 22 + OMAP_INTC_START, },
-        { .name = "tx", .irq = 89 },
+        { .name = "tx", .irq = 89 + OMAP_INTC_START, },
-        { .name = "rx", .irq = 90 },
+        { .name = "rx", .irq = 90 + OMAP_INTC_START, },
-        { .irq = -1 }
+        { .irq = -1 },
 };
 static struct omap_mcbsp_dev_attr omap34xx_mcbsp3_dev_attr = {
@@ -1189,10 +1189,10 @@ static struct omap_hwmod omap3xxx_mcbsp3_hwmod = {
 /* mcbsp4 */
 static struct omap_hwmod_irq_info omap3xxx_mcbsp4_irqs[] = {
-        { .name = "common", .irq = 23 },
+        { .name = "common", .irq = 23 + OMAP_INTC_START, },
-        { .name = "tx", .irq = 54 },
+        { .name = "tx", .irq = 54 + OMAP_INTC_START, },
-        { .name = "rx", .irq = 55 },
+        { .name = "rx", .irq = 55 + OMAP_INTC_START, },
-        { .irq = -1 }
+        { .irq = -1 },
 };
 static struct omap_hwmod_dma_info omap3xxx_mcbsp4_sdma_chs[] = {
@@ -1222,10 +1222,10 @@ static struct omap_hwmod omap3xxx_mcbsp4_hwmod = {
 /* mcbsp5 */
 static struct omap_hwmod_irq_info omap3xxx_mcbsp5_irqs[] = {
-        { .name = "common", .irq = 27 },
+        { .name = "common", .irq = 27 + OMAP_INTC_START, },
-        { .name = "tx", .irq = 81 },
+        { .name = "tx", .irq = 81 + OMAP_INTC_START, },
-        { .name = "rx", .irq = 82 },
+        { .name = "rx", .irq = 82 + OMAP_INTC_START, },
-        { .irq = -1 }
+        { .irq = -1 },
 };
 static struct omap_hwmod_dma_info omap3xxx_mcbsp5_sdma_chs[] = {
@@ -1267,8 +1267,8 @@ static struct omap_hwmod_class omap3xxx_mcbsp_sidetone_hwmod_class = {
 /* mcbsp2_sidetone */
 static struct omap_hwmod_irq_info omap3xxx_mcbsp2_sidetone_irqs[] = {
-        { .name = "irq", .irq = 4 },
+        { .name = "irq", .irq = 4 + OMAP_INTC_START, },
-        { .irq = -1 }
+        { .irq = -1 },
 };
 static struct omap_hwmod omap3xxx_mcbsp2_sidetone_hwmod = {
@@ -1289,8 +1289,8 @@ static struct omap_hwmod omap3xxx_mcbsp2_sidetone_hwmod = {
 /* mcbsp3_sidetone */
 static struct omap_hwmod_irq_info omap3xxx_mcbsp3_sidetone_irqs[] = {
-        { .name = "irq", .irq = 5 },
+        { .name = "irq", .irq = 5 + OMAP_INTC_START, },
-        { .irq = -1 }
+        { .irq = -1 },
 };
 static struct omap_hwmod omap3xxx_mcbsp3_sidetone_hwmod = {
@@ -1352,8 +1352,8 @@ static struct omap_smartreflex_dev_attr sr1_dev_attr = {
 };
 static struct omap_hwmod_irq_info omap3_smartreflex_mpu_irqs[] = {
-        { .irq = 18 },
+        { .irq = 18 + OMAP_INTC_START, },
-        { .irq = -1 }
+        { .irq = -1 },
 };
 static struct omap_hwmod omap34xx_sr1_hwmod = {
@@ -1397,8 +1397,8 @@ static struct omap_smartreflex_dev_attr sr2_dev_attr = {
 };
 static struct omap_hwmod_irq_info omap3_smartreflex_core_irqs[] = {
-        { .irq = 19 },
+        { .irq = 19 + OMAP_INTC_START, },
-        { .irq = -1 }
+        { .irq = -1 },
 };
 static struct omap_hwmod omap34xx_sr2_hwmod = {
@@ -1458,8 +1458,8 @@ static struct omap_hwmod_class omap3xxx_mailbox_hwmod_class = {
 };
 static struct omap_hwmod_irq_info omap3xxx_mailbox_irqs[] = {
-        { .irq = 26 },
+        { .irq = 26 + OMAP_INTC_START, },
-        { .irq = -1 }
+        { .irq = -1 },
 };
 static struct omap_hwmod omap3xxx_mailbox_hwmod = {
@@ -1549,8 +1549,8 @@ static struct omap_hwmod omap34xx_mcspi2 = {
 /* mcspi3 */
 static struct omap_hwmod_irq_info omap34xx_mcspi3_mpu_irqs[] = {
-        { .name = "irq", .irq = 91 }, /* 91 */
+        { .name = "irq", .irq = 91 + OMAP_INTC_START, }, /* 91 */
-        { .irq = -1 }
+        { .irq = -1 },
 };
 static struct omap_hwmod_dma_info omap34xx_mcspi3_sdma_reqs[] = {
@@ -1585,8 +1585,8 @@ static struct omap_hwmod omap34xx_mcspi3 = {
 /* mcspi4 */
 static struct omap_hwmod_irq_info omap34xx_mcspi4_mpu_irqs[] = {
-        { .name = "irq", .irq = INT_34XX_SPI4_IRQ }, /* 48 */
+        { .name = "irq", .irq = 48 + OMAP_INTC_START, },
-        { .irq = -1 }
+        { .irq = -1 },
 };
 static struct omap_hwmod_dma_info omap34xx_mcspi4_sdma_reqs[] = {
@@ -1638,9 +1638,9 @@ static struct omap_hwmod_class usbotg_class = {
 /* usb_otg_hs */
 static struct omap_hwmod_irq_info omap3xxx_usbhsotg_mpu_irqs[] = {
-        { .name = "mc", .irq = 92 },
+        { .name = "mc", .irq = 92 + OMAP_INTC_START, },
-        { .name = "dma", .irq = 93 },
+        { .name = "dma", .irq = 93 + OMAP_INTC_START, },
-        { .irq = -1 }
+        { .irq = -1 },
 };
 static struct omap_hwmod omap3xxx_usbhsotg_hwmod = {
@@ -1670,8 +1670,8 @@ static struct omap_hwmod omap3xxx_usbhsotg_hwmod = {
 /* usb_otg_hs */
 static struct omap_hwmod_irq_info am35xx_usbhsotg_mpu_irqs[] = {
-        { .name = "mc", .irq = 71 },
+        { .name = "mc", .irq = 71 + OMAP_INTC_START, },
-        { .irq = -1 }
+        { .irq = -1 },
 };
 static struct omap_hwmod_class am35xx_usbotg_class = {
@@ -1706,8 +1706,8 @@ static struct omap_hwmod_class omap34xx_mmc_class = {
 /* MMC/SD/SDIO1 */
 static struct omap_hwmod_irq_info omap34xx_mmc1_mpu_irqs[] = {
-        { .irq = 83, },
+        { .irq = 83 + OMAP_INTC_START, },
-        { .irq = -1 }
+        { .irq = -1 },
 };
 static struct omap_hwmod_dma_info omap34xx_mmc1_sdma_reqs[] = {
@@ -1773,8 +1773,8 @@ static struct omap_hwmod omap3xxx_es3plus_mmc1_hwmod = {
 /* MMC/SD/SDIO2 */
 static struct omap_hwmod_irq_info omap34xx_mmc2_mpu_irqs[] = {
-        { .irq = INT_24XX_MMC2_IRQ, },
+        { .irq = 86 + OMAP_INTC_START, },
-        { .irq = -1 }
+        { .irq = -1 },
 };
 static struct omap_hwmod_dma_info omap34xx_mmc2_sdma_reqs[] = {
@@ -1834,8 +1834,8 @@ static struct omap_hwmod omap3xxx_es3plus_mmc2_hwmod = {
 /* MMC/SD/SDIO3 */
 static struct omap_hwmod_irq_info omap34xx_mmc3_mpu_irqs[] = {
-        { .irq = 94, },
+        { .irq = 94 + OMAP_INTC_START, },
-        { .irq = -1 }
+        { .irq = -1 },
 };
 static struct omap_hwmod_dma_info omap34xx_mmc3_sdma_reqs[] = {
@@ -1893,9 +1893,9 @@ static struct omap_hwmod_opt_clk omap3xxx_usb_host_hs_opt_clks[] = {
 };
 static struct omap_hwmod_irq_info omap3xxx_usb_host_hs_irqs[] = {
-        { .name = "ohci-irq", .irq = 76 },
+        { .name = "ohci-irq", .irq = 76 + OMAP_INTC_START, },
-        { .name = "ehci-irq", .irq = 77 },
+        { .name = "ehci-irq", .irq = 77 + OMAP_INTC_START, },
-        { .irq = -1 }
+        { .irq = -1 },
 };
 static struct omap_hwmod omap3xxx_usb_host_hs_hwmod = {
@@ -1987,8 +1987,8 @@ static struct omap_hwmod_class omap3xxx_usb_tll_hs_hwmod_class = {
 };
 static struct omap_hwmod_irq_info omap3xxx_usb_tll_hs_irqs[] = {
-        { .name = "tll-irq", .irq = 78 },
+        { .name = "tll-irq", .irq = 78 + OMAP_INTC_START, },
-        { .irq = -1 }
+        { .irq = -1 },
 };
 static struct omap_hwmod omap3xxx_usb_tll_hs_hwmod = {
@@ -3214,11 +3214,11 @@ static struct omap_hwmod_ocp_if am35xx_l4_core__mdio = {
 };
 static struct omap_hwmod_irq_info am35xx_emac_mpu_irqs[] = {
-        { .name = "rxthresh",   .irq = INT_35XX_EMAC_C0_RXTHRESH_IRQ },
+        { .name = "rxthresh",   .irq = 67 + OMAP_INTC_START, },
-        { .name = "rx_pulse",   .irq = INT_35XX_EMAC_C0_RX_PULSE_IRQ },
+        { .name = "rx_pulse",   .irq = 68 + OMAP_INTC_START, },
-        { .name = "tx_pulse",   .irq = INT_35XX_EMAC_C0_TX_PULSE_IRQ },
+        { .name = "tx_pulse",   .irq = 69 + OMAP_INTC_START },
-        { .name = "misc_pulse", .irq = INT_35XX_EMAC_C0_MISC_PULSE_IRQ },
+        { .name = "misc_pulse", .irq = 70 + OMAP_INTC_START },
-        { .irq = -1 }
+        { .irq = -1 },
 };
 static struct omap_hwmod_class am35xx_emac_class = {
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index 242aee498ceb..b95244b76a15 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -19,12 +19,11 @@
 */
 #include <linux/io.h>
+#include <linux/platform_data/gpio-omap.h>
 #include <linux/power/smartreflex.h>
 #include <plat/omap_hwmod.h>
-#include <plat/cpu.h>
 #include <plat/i2c.h>
-#include <plat/gpio.h>
 #include <plat/dma.h>
 #include <plat/mcspi.h>
 #include <plat/mcbsp.h>
diff --git a/arch/arm/mach-omap2/omap_hwmod_common_data.h b/arch/arm/mach-omap2/omap_hwmod_common_data.h
index e7e8eeae95e5..dddb677fed68 100644
--- a/arch/arm/mach-omap2/omap_hwmod_common_data.h
+++ b/arch/arm/mach-omap2/omap_hwmod_common_data.h
@@ -16,6 +16,7 @@
 #include <plat/omap_hwmod.h>
+#include "common.h"
 #include "display.h"
 /* Common address space across OMAP2xxx */
diff --git a/arch/arm/mach-omap2/omap_l3_noc.c b/arch/arm/mach-omap2/omap_l3_noc.c
index d15225ff5c49..f447e02102bb 100644
--- a/arch/arm/mach-omap2/omap_l3_noc.c
+++ b/arch/arm/mach-omap2/omap_l3_noc.c
@@ -28,6 +28,7 @@
 #include <linux/kernel.h>
 #include <linux/slab.h>
+#include "soc.h"
 #include "omap_l3_noc.h"
 /*
@@ -190,7 +191,7 @@ static int __devinit omap4_l3_probe(struct platform_device *pdev)
                        IRQF_DISABLED, "l3-dbg-irq", l3);
        if (ret) {
                pr_crit("L3: request_irq failed to register for 0x%x\n",
-                                                OMAP44XX_IRQ_L3_DBG);
+                                                9 + OMAP44XX_IRQ_GIC_START);
                goto err3;
        }
@@ -200,7 +201,7 @@ static int __devinit omap4_l3_probe(struct platform_device *pdev)
                        IRQF_DISABLED, "l3-app-irq", l3);
        if (ret) {
                pr_crit("L3: request_irq failed to register for 0x%x\n",
-                                                OMAP44XX_IRQ_L3_APP);
+                                                10 + OMAP44XX_IRQ_GIC_START);
                goto err4;
        }
diff --git a/arch/arm/mach-omap2/omap_phy_internal.c b/arch/arm/mach-omap2/omap_phy_internal.c
index d52651a05daa..593eaea35cec 100644
--- a/arch/arm/mach-omap2/omap_phy_internal.c
+++ b/arch/arm/mach-omap2/omap_phy_internal.c
@@ -29,6 +29,8 @@
 #include <linux/usb.h>
 #include <plat/usb.h>
+#include "soc.h"
 #include "control.h"
 /* OMAP control module register for UTMI PHY */
diff --git a/arch/arm/mach-omap2/opp2420_data.c b/arch/arm/mach-omap2/opp2420_data.c
index 5037e76e4e23..a9e8cf21705d 100644
--- a/arch/arm/mach-omap2/opp2420_data.c
+++ b/arch/arm/mach-omap2/opp2420_data.c
@@ -28,7 +28,7 @@
 *     http://repository.maemo.org/pool/diablo/free/k/kernel-source-diablo/
 */
-#include <plat/hardware.h>
+#include <linux/kernel.h>
 #include "opp2xxx.h"
 #include "sdrc.h"
diff --git a/arch/arm/mach-omap2/opp2430_data.c b/arch/arm/mach-omap2/opp2430_data.c
index 750805c528d8..0e75ec3e114b 100644
--- a/arch/arm/mach-omap2/opp2430_data.c
+++ b/arch/arm/mach-omap2/opp2430_data.c
@@ -26,7 +26,7 @@
 * This is technically part of the OMAP2xxx clock code.
 */
-#include <plat/hardware.h>
+#include <linux/kernel.h>
 #include "opp2xxx.h"
 #include "sdrc.h"
diff --git a/arch/arm/mach-omap2/opp3xxx_data.c b/arch/arm/mach-omap2/opp3xxx_data.c
index d95f3f945d4a..75cef5f67a8a 100644
--- a/arch/arm/mach-omap2/opp3xxx_data.c
+++ b/arch/arm/mach-omap2/opp3xxx_data.c
@@ -19,8 +19,6 @@
 */
 #include <linux/module.h>
-#include <plat/cpu.h>
 #include "control.h"
 #include "omap_opp_data.h"
 #include "pm.h"
diff --git a/arch/arm/mach-omap2/opp4xxx_data.c b/arch/arm/mach-omap2/opp4xxx_data.c
index 2293ba27101b..a9fd6d5fe79e 100644
--- a/arch/arm/mach-omap2/opp4xxx_data.c
+++ b/arch/arm/mach-omap2/opp4xxx_data.c
@@ -20,8 +20,7 @@
 */
 #include <linux/module.h>
-#include <plat/cpu.h>
+#include "soc.h"
 #include "control.h"
 #include "omap_opp_data.h"
 #include "pm.h"
@@ -94,7 +93,7 @@ int __init omap4_opp_init(void)
 {
        int r = -ENODEV;
-        if (!cpu_is_omap44xx())
+        if (!cpu_is_omap443x())
                return r;
        r = omap_init_opp_table(omap44xx_opp_def_list,
diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c
index 814bcd901596..3e1345fc0713 100644
--- a/arch/arm/mach-omap2/pm-debug.c
+++ b/arch/arm/mach-omap2/pm-debug.c
@@ -28,7 +28,6 @@
 #include <linux/slab.h>
 #include <plat/clock.h>
-#include <plat/board.h>
 #include "powerdomain.h"
 #include "clockdomain.h"
 #include <plat/dmtimer.h>
diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c
index 2edeffc923a6..8af6cd6ac331 100644
--- a/arch/arm/mach-omap2/pm24xx.c
+++ b/arch/arm/mach-omap2/pm24xx.c
@@ -29,6 +29,7 @@
 #include <linux/irq.h>
 #include <linux/time.h>
 #include <linux/gpio.h>
+#include <linux/platform_data/gpio-omap.h>
 #include <asm/mach/time.h>
 #include <asm/mach/irq.h>
@@ -38,9 +39,6 @@
 #include <plat/clock.h>
 #include <plat/sram.h>
 #include <plat/dma.h>
-#include <plat/board.h>
-#include <mach/irqs.h>
 #include "common.h"
 #include "prm2xxx_3xxx.h"
@@ -352,16 +350,6 @@ int __init omap2_pm_init(void)
        prcm_setup_regs();
-        /* Hack to prevent MPU retention when STI console is enabled. */
-        {
-                const struct omap_sti_console_config *sti;
-                sti = omap_get_config(OMAP_TAG_STI_CONSOLE,
-                                      struct omap_sti_console_config);
-                if (sti != NULL && sti->enable)
-                        sti_console_enabled = 1;
-        }
        /*
         * We copy the assembler sleep/wakeup routines to SRAM.
         * These routines need to be in SRAM as that's the only
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index e4fc88c65dbd..90480f759974 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -28,6 +28,8 @@
 #include <linux/clk.h>
 #include <linux/delay.h>
 #include <linux/slab.h>
+#include <linux/platform_data/gpio-omap.h>
 #include <trace/events/power.h>
 #include <asm/suspend.h>
@@ -272,21 +274,16 @@ void omap_sram_idle(void)
        per_next_state = pwrdm_read_next_pwrst(per_pwrdm);
        core_next_state = pwrdm_read_next_pwrst(core_pwrdm);
-        if (mpu_next_state < PWRDM_POWER_ON) {
+        pwrdm_pre_transition(NULL);
-                pwrdm_pre_transition(mpu_pwrdm);
-                pwrdm_pre_transition(neon_pwrdm);
-        }
        /* PER */
        if (per_next_state < PWRDM_POWER_ON) {
-                pwrdm_pre_transition(per_pwrdm);
                per_going_off = (per_next_state == PWRDM_POWER_OFF) ? 1 : 0;
                omap2_gpio_prepare_for_idle(per_going_off);
        }
        /* CORE */
        if (core_next_state < PWRDM_POWER_ON) {
-                pwrdm_pre_transition(core_pwrdm);
                if (core_next_state == PWRDM_POWER_OFF) {
                        omap3_core_save_context();
                        omap3_cm_save_context();
@@ -339,20 +336,14 @@ void omap_sram_idle(void)
                        omap2_prm_clear_mod_reg_bits(OMAP3430_AUTO_OFF_MASK,
                                               OMAP3430_GR_MOD,
                                               OMAP3_PRM_VOLTCTRL_OFFSET);
-                pwrdm_post_transition(core_pwrdm);
        }
        omap3_intc_resume_idle();
+        pwrdm_post_transition(NULL);
        /* PER */
-        if (per_next_state < PWRDM_POWER_ON) {
+        if (per_next_state < PWRDM_POWER_ON)
                omap2_gpio_resume_after_idle();
-                pwrdm_post_transition(per_pwrdm);
-        }
-        if (mpu_next_state < PWRDM_POWER_ON) {
-                pwrdm_post_transition(mpu_pwrdm);
-                pwrdm_post_transition(neon_pwrdm);
-        }
 }
 static void omap3_pm_idle(void)
diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c
index 69b36e185e9b..ca5be83d5019 100644
--- a/arch/arm/mach-omap2/powerdomain.c
+++ b/arch/arm/mach-omap2/powerdomain.c
@@ -28,11 +28,13 @@
 #include "prm44xx.h"
 #include <asm/cpu.h>
-#include <plat/cpu.h>
+#include <plat/prcm.h>
 #include "powerdomain.h"
 #include "clockdomain.h"
-#include <plat/prcm.h>
+#include "soc.h"
 #include "pm.h"
 #define PWRDM_TRACE_STATES_FLAG (1<<31)
diff --git a/arch/arm/mach-omap2/powerdomains3xxx_data.c b/arch/arm/mach-omap2/powerdomains3xxx_data.c
index bb883e463078..8b23d234fb55 100644
--- a/arch/arm/mach-omap2/powerdomains3xxx_data.c
+++ b/arch/arm/mach-omap2/powerdomains3xxx_data.c
@@ -15,11 +15,9 @@
 #include <linux/init.h>
 #include <linux/bug.h>
-#include <plat/cpu.h>
+#include "soc.h"
 #include "powerdomain.h"
 #include "powerdomains2xxx_3xxx_data.h"
 #include "prcm-common.h"
 #include "prm2xxx_3xxx.h"
 #include "prm-regbits-34xx.h"
diff --git a/arch/arm/mach-omap2/prcm.c b/arch/arm/mach-omap2/prcm.c
index 053e24ed3c48..9c9d23c10205 100644
--- a/arch/arm/mach-omap2/prcm.c
+++ b/arch/arm/mach-omap2/prcm.c
@@ -27,7 +27,6 @@
 #include "common.h"
 #include <plat/prcm.h>
-#include <plat/irqs.h>
 #include "clock.h"
 #include "clock2xxx.h"
diff --git a/arch/arm/mach-omap2/prm2xxx_3xxx.c b/arch/arm/mach-omap2/prm2xxx_3xxx.c
index a0309dea6794..9529984d8d2b 100644
--- a/arch/arm/mach-omap2/prm2xxx_3xxx.c
+++ b/arch/arm/mach-omap2/prm2xxx_3xxx.c
@@ -17,11 +17,10 @@
 #include <linux/io.h>
 #include <linux/irq.h>
-#include "common.h"
-#include <plat/cpu.h>
 #include <plat/prcm.h>
-#include <plat/irqs.h>
+#include "soc.h"
+#include "common.h"
 #include "vp.h"
 #include "prm2xxx_3xxx.h"
@@ -40,7 +39,7 @@ static struct omap_prcm_irq_setup omap3_prcm_irq_setup = {
        .nr_regs                = 1,
        .irqs                   = omap3_prcm_irqs,
        .nr_irqs                = ARRAY_SIZE(omap3_prcm_irqs),
-        .irq                    = INT_34XX_PRCM_MPU_IRQ,
+        .irq                    = 11 + OMAP_INTC_START,
        .read_pending_irqs      = &omap3xxx_prm_read_pending_irqs,
        .ocp_barrier            = &omap3xxx_prm_ocp_barrier,
        .save_and_clear_irqen   = &omap3xxx_prm_save_and_clear_irqen,
diff --git a/arch/arm/mach-omap2/prm44xx.c b/arch/arm/mach-omap2/prm44xx.c
index bb727c2d9337..f0c4d5f4a174 100644
--- a/arch/arm/mach-omap2/prm44xx.c
+++ b/arch/arm/mach-omap2/prm44xx.c
@@ -17,10 +17,9 @@
 #include <linux/err.h>
 #include <linux/io.h>
-#include <plat/cpu.h>
-#include <plat/irqs.h>
 #include <plat/prcm.h>
+#include "soc.h"
 #include "iomap.h"
 #include "common.h"
 #include "vp.h"
@@ -40,7 +39,7 @@ static struct omap_prcm_irq_setup omap4_prcm_irq_setup = {
        .nr_regs                = 2,
        .irqs                   = omap4_prcm_irqs,
        .nr_irqs                = ARRAY_SIZE(omap4_prcm_irqs),
-        .irq                    = OMAP44XX_IRQ_PRCM,
+        .irq                    = 11 + OMAP44XX_IRQ_GIC_START,
        .read_pending_irqs      = &omap44xx_prm_read_pending_irqs,
        .ocp_barrier            = &omap44xx_prm_ocp_barrier,
        .save_and_clear_irqen   = &omap44xx_prm_save_and_clear_irqen,
diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c
index 03b126d9ad94..6b4d332be2f6 100644
--- a/arch/arm/mach-omap2/prm_common.c
+++ b/arch/arm/mach-omap2/prm_common.c
@@ -26,7 +26,6 @@
 #include <plat/common.h>
 #include <plat/prcm.h>
-#include <plat/irqs.h>
 #include "prm2xxx_3xxx.h"
 #include "prm44xx.h"
diff --git a/arch/arm/mach-omap2/sdrc2xxx.c b/arch/arm/mach-omap2/sdrc2xxx.c
index 1133bb2f632b..73e55e485329 100644
--- a/arch/arm/mach-omap2/sdrc2xxx.c
+++ b/arch/arm/mach-omap2/sdrc2xxx.c
@@ -24,11 +24,11 @@
 #include <linux/clk.h>
 #include <linux/io.h>
-#include <plat/hardware.h>
 #include <plat/clock.h>
 #include <plat/sram.h>
 #include <plat/sdrc.h>
+#include "soc.h"
 #include "iomap.h"
 #include "common.h"
 #include "prm2xxx_3xxx.h"
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index c1b93c752d70..7ca266e987f6 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -29,11 +29,11 @@
 #include <plat/omap-serial.h>
 #include "common.h"
-#include <plat/board.h>
 #include <plat/dma.h>
 #include <plat/omap_hwmod.h>
 #include <plat/omap_device.h>
 #include <plat/omap-pm.h>
+#include <plat/serial.h>
 #include "prm2xxx_3xxx.h"
 #include "pm.h"
@@ -81,8 +81,9 @@ static struct omap_uart_port_info omap_serial_default_info[] __initdata = {
 };
 #ifdef CONFIG_PM
-static void omap_uart_enable_wakeup(struct platform_device *pdev, bool enable)
+static void omap_uart_enable_wakeup(struct device *dev, bool enable)
 {
+        struct platform_device *pdev = to_platform_device(dev);
        struct omap_device *od = to_omap_device(pdev);
        if (!od)
@@ -99,15 +100,17 @@ static void omap_uart_enable_wakeup(struct platform_device *pdev, bool enable)
 * in Smartidle Mode When Configured for DMA Operations.
 * WA: configure uart in force idle mode.
 */
-static void omap_uart_set_noidle(struct platform_device *pdev)
+static void omap_uart_set_noidle(struct device *dev)
 {
+        struct platform_device *pdev = to_platform_device(dev);
        struct omap_device *od = to_omap_device(pdev);
        omap_hwmod_set_slave_idlemode(od->hwmods[0], HWMOD_IDLEMODE_NO);
 }
-static void omap_uart_set_smartidle(struct platform_device *pdev)
+static void omap_uart_set_smartidle(struct device *dev)
 {
+        struct platform_device *pdev = to_platform_device(dev);
        struct omap_device *od = to_omap_device(pdev);
        u8 idlemode;
@@ -120,10 +123,10 @@ static void omap_uart_set_smartidle(struct platform_device *pdev)
 }
 #else
-static void omap_uart_enable_wakeup(struct platform_device *pdev, bool enable)
+static void omap_uart_enable_wakeup(struct device *dev, bool enable)
 {}
-static void omap_uart_set_noidle(struct platform_device *pdev) {}
+static void omap_uart_set_noidle(struct device *dev) {}
-static void omap_uart_set_smartidle(struct platform_device *pdev) {}
+static void omap_uart_set_smartidle(struct device *dev) {}
 #endif /* CONFIG_PM */
 #ifdef CONFIG_OMAP_MUX
@@ -304,6 +307,9 @@ void __init omap_serial_init_port(struct omap_board_data *bdata,
        omap_up.dma_rx_timeout = info->dma_rx_timeout;
        omap_up.dma_rx_poll_rate = info->dma_rx_poll_rate;
        omap_up.autosuspend_timeout = info->autosuspend_timeout;
+        omap_up.DTR_gpio = info->DTR_gpio;
+        omap_up.DTR_inverted = info->DTR_inverted;
+        omap_up.DTR_present = info->DTR_present;
        pdata = &omap_up;
        pdata_size = sizeof(struct omap_uart_port_info);
diff --git a/arch/arm/mach-omap2/sleep24xx.S b/arch/arm/mach-omap2/sleep24xx.S
index d4bf904d84ab..ce0ccd26efbd 100644
--- a/arch/arm/mach-omap2/sleep24xx.S
+++ b/arch/arm/mach-omap2/sleep24xx.S
@@ -28,8 +28,7 @@
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <plat/omap24xx.h>
+#include "omap24xx.h"
 #include "sdrc.h"
 /* First address of reserved address space?  apparently valid for OMAP2 & 3 */
diff --git a/arch/arm/mach-omap2/sleep34xx.S b/arch/arm/mach-omap2/sleep34xx.S
index 1f62f23673fb..506987979c1c 100644
--- a/arch/arm/mach-omap2/sleep34xx.S
+++ b/arch/arm/mach-omap2/sleep34xx.S
@@ -26,9 +26,9 @@
 #include <asm/assembler.h>
-#include <plat/hardware.h>
 #include <plat/sram.h>
+#include "omap34xx.h"
 #include "iomap.h"
 #include "cm2xxx_3xxx.h"
 #include "prm2xxx_3xxx.h"
diff --git a/arch/arm/mach-omap2/sleep44xx.S b/arch/arm/mach-omap2/sleep44xx.S
index 9f6b83d1b193..b7d8ead4b86a 100644
--- a/arch/arm/mach-omap2/sleep44xx.S
+++ b/arch/arm/mach-omap2/sleep44xx.S
@@ -14,10 +14,10 @@
 #include <asm/memory.h>
 #include <asm/hardware/cache-l2x0.h>
-#include <plat/omap44xx.h>
 #include <mach/omap-secure.h>
 #include "common.h"
+#include "omap44xx.h"
 #include "omap4-sar-layout.h"
 #if defined(CONFIG_SMP) && defined(CONFIG_PM)
@@ -56,9 +56,13 @@ ppa_por_params:
 * The restore function pointer is stored at CPUx_WAKEUP_NS_PA_ADDR_OFFSET.
 * It returns to the caller for CPU INACTIVE and ON power states or in case
 * CPU failed to transition to targeted OFF/DORMANT state.
+ *
+ * omap4_finish_suspend() calls v7_flush_dcache_all() which doesn't save
+ * stack frame and it expects the caller to take care of it. Hence the entire
+ * stack frame is saved to avoid possible stack corruption.
 */
 ENTRY(omap4_finish_suspend)
-        stmfd   sp!, {lr}
+        stmfd   sp!, {r4-r12, lr}
        cmp     r0, #0x0
        beq     do_WFI                          @ No lowpower state, jump to WFI
@@ -226,7 +230,7 @@ scu_gp_clear:
 skip_scu_gp_clear:
        isb
        dsb
-        ldmfd   sp!, {pc}
+        ldmfd   sp!, {r4-r12, pc}
 ENDPROC(omap4_finish_suspend)
 /*
diff --git a/arch/arm/mach-omap2/soc.h b/arch/arm/mach-omap2/soc.h
new file mode 100644
index 000000000000..fc9b96daf851
--- /dev/null
+++ b/arch/arm/mach-omap2/soc.h
@@ -0,0 +1,7 @@
+#include <plat/cpu.h>
+#include "omap24xx.h"
+#include "omap34xx.h"
+#include "omap44xx.h"
+#include "ti81xx.h"
+#include "am33xx.h"
+#include "omap54xx.h"
diff --git a/arch/arm/mach-omap2/sram242x.S b/arch/arm/mach-omap2/sram242x.S
index ee0bfcc1410f..8f7326cd435b 100644
--- a/arch/arm/mach-omap2/sram242x.S
+++ b/arch/arm/mach-omap2/sram242x.S
@@ -32,8 +32,7 @@
 #include <asm/assembler.h>
-#include <mach/hardware.h>
+#include "soc.h"
 #include "iomap.h"
 #include "prm2xxx_3xxx.h"
 #include "cm2xxx_3xxx.h"
diff --git a/arch/arm/mach-omap2/sram243x.S b/arch/arm/mach-omap2/sram243x.S
index d4d39ef04769..b140d6578529 100644
--- a/arch/arm/mach-omap2/sram243x.S
+++ b/arch/arm/mach-omap2/sram243x.S
@@ -32,8 +32,7 @@
 #include <asm/assembler.h>
-#include <mach/hardware.h>
+#include "soc.h"
 #include "iomap.h"
 #include "prm2xxx_3xxx.h"
 #include "cm2xxx_3xxx.h"
diff --git a/arch/arm/mach-omap2/sram34xx.S b/arch/arm/mach-omap2/sram34xx.S
index df5a21322b0a..2d0ceaa23fb8 100644
--- a/arch/arm/mach-omap2/sram34xx.S
+++ b/arch/arm/mach-omap2/sram34xx.S
@@ -29,8 +29,7 @@
 #include <asm/assembler.h>
-#include <mach/hardware.h>
+#include "soc.h"
 #include "iomap.h"
 #include "sdrc.h"
 #include "cm2xxx_3xxx.h"
diff --git a/arch/arm/plat-omap/include/plat/ti81xx.h b/arch/arm/mach-omap2/ti81xx.h
index 8f9843f78422..8f9843f78422 100644
--- a/arch/arm/plat-omap/include/plat/ti81xx.h
+++ b/arch/arm/mach-omap2/ti81xx.h
diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c
index 31f9c936125f..e2084facca59 100644
--- a/arch/arm/mach-omap2/timer.c
+++ b/arch/arm/mach-omap2/timer.c
@@ -39,14 +39,16 @@
 #include <linux/of.h>
 #include <asm/mach/time.h>
-#include <plat/dmtimer.h>
 #include <asm/smp_twd.h>
 #include <asm/sched_clock.h>
-#include "common.h"
 #include <plat/omap_hwmod.h>
 #include <plat/omap_device.h>
+#include <plat/dmtimer.h>
 #include <plat/omap-pm.h>
+#include "soc.h"
+#include "common.h"
 #include "powerdomain.h"
 /* Parent clocks, eventually these will come from the clock framework */
@@ -374,8 +376,7 @@ OMAP_SYS_TIMER(3_am33xx)
 #ifdef CONFIG_ARCH_OMAP4
 #ifdef CONFIG_LOCAL_TIMERS
 static DEFINE_TWD_LOCAL_TIMER(twd_local_timer,
-                              OMAP44XX_LOCAL_TWD_BASE,
+                              OMAP44XX_LOCAL_TWD_BASE, 29 + OMAP_INTC_START);
-                              OMAP44XX_IRQ_LOCALTIMER);
 #endif
 static void __init omap4_timer_init(void)
diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c
index de47f170ba50..99be94e94547 100644
--- a/arch/arm/mach-omap2/twl-common.c
+++ b/arch/arm/mach-omap2/twl-common.c
@@ -29,6 +29,7 @@
 #include <plat/i2c.h>
 #include <plat/usb.h>
+#include "soc.h"
 #include "twl-common.h"
 #include "pm.h"
 #include "voltage.h"
@@ -67,6 +68,7 @@ void __init omap_pmic_init(int bus, u32 clkrate,
                           const char *pmic_type, int pmic_irq,
                           struct twl4030_platform_data *pmic_data)
 {
+        omap_mux_init_signal("sys_nirq", OMAP_PIN_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE);
        strncpy(pmic_i2c_board_info.type, pmic_type,
                sizeof(pmic_i2c_board_info.type));
        pmic_i2c_board_info.irq = pmic_irq;
@@ -83,7 +85,7 @@ void __init omap4_pmic_init(const char *pmic_type,
        omap_mux_init_signal("sys_nirq1", OMAP_PIN_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE);
        strncpy(omap4_i2c1_board_info[0].type, pmic_type,
                sizeof(omap4_i2c1_board_info[0].type));
-        omap4_i2c1_board_info[0].irq = OMAP44XX_IRQ_SYS_1N;
+        omap4_i2c1_board_info[0].irq = 7 + OMAP44XX_IRQ_GIC_START;
        omap4_i2c1_board_info[0].platform_data = pmic_data;
        /* TWL6040 audio IC part */
diff --git a/arch/arm/mach-omap2/twl-common.h b/arch/arm/mach-omap2/twl-common.h
index 8fe71cfd002c..d109c09ef34b 100644
--- a/arch/arm/mach-omap2/twl-common.h
+++ b/arch/arm/mach-omap2/twl-common.h
@@ -1,7 +1,7 @@
 #ifndef __OMAP_PMIC_COMMON__
 #define __OMAP_PMIC_COMMON__
-#include <plat/irqs.h>
+#include "common.h"
 #define TWL_COMMON_PDATA_USB            (1 << 0)
 #define TWL_COMMON_PDATA_BCI            (1 << 1)
@@ -40,13 +40,13 @@ void omap_pmic_late_init(void);
 static inline void omap2_pmic_init(const char *pmic_type,
                                   struct twl4030_platform_data *pmic_data)
 {
-        omap_pmic_init(2, 2600, pmic_type, INT_24XX_SYS_NIRQ, pmic_data);
+        omap_pmic_init(2, 2600, pmic_type, 7 + OMAP_INTC_START, pmic_data);
 }
 static inline void omap3_pmic_init(const char *pmic_type,
                                   struct twl4030_platform_data *pmic_data)
 {
-        omap_pmic_init(1, 2600, pmic_type, INT_34XX_SYS_NIRQ, pmic_data);
+        omap_pmic_init(1, 2600, pmic_type, 7 + OMAP_INTC_START, pmic_data);
 }
 void omap4_pmic_init(const char *pmic_type,
diff --git a/arch/arm/mach-omap2/usb-host.c b/arch/arm/mach-omap2/usb-host.c
index dde8a11f47d5..ac95daaa4702 100644
--- a/arch/arm/mach-omap2/usb-host.c
+++ b/arch/arm/mach-omap2/usb-host.c
@@ -25,8 +25,6 @@
 #include <asm/io.h>
-#include <mach/hardware.h>
-#include <mach/irqs.h>
 #include <plat/usb.h>
 #include <plat/omap_device.h>
diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c
index c4a576856661..89150b2435e5 100644
--- a/arch/arm/mach-omap2/usb-musb.c
+++ b/arch/arm/mach-omap2/usb-musb.c
@@ -23,14 +23,13 @@
 #include <linux/clk.h>
 #include <linux/dma-mapping.h>
 #include <linux/io.h>
 #include <linux/usb/musb.h>
-#include <mach/hardware.h>
-#include <mach/irqs.h>
-#include <mach/am35xx.h>
 #include <plat/usb.h>
 #include <plat/omap_device.h>
+#include <mach/am35xx.h>
 #include "mux.h"
 static struct musb_hdrc_config musb_config = {
diff --git a/arch/arm/mach-omap2/vc.c b/arch/arm/mach-omap2/vc.c
index 84da34f9a7cf..b451f3c13292 100644
--- a/arch/arm/mach-omap2/vc.c
+++ b/arch/arm/mach-omap2/vc.c
@@ -12,8 +12,7 @@
 #include <linux/init.h>
 #include <linux/bug.h>
-#include <plat/cpu.h>
+#include "soc.h"
 #include "voltage.h"
 #include "vc.h"
 #include "prm-regbits-34xx.h"
diff --git a/arch/arm/mach-omap2/voltagedomains3xxx_data.c b/arch/arm/mach-omap2/voltagedomains3xxx_data.c
index d0103c80d040..63afbfed3cbc 100644
--- a/arch/arm/mach-omap2/voltagedomains3xxx_data.c
+++ b/arch/arm/mach-omap2/voltagedomains3xxx_data.c
@@ -18,9 +18,8 @@
 #include <linux/err.h>
 #include <linux/init.h>
+#include "soc.h"
 #include "common.h"
-#include <plat/cpu.h>
 #include "prm-regbits-34xx.h"
 #include "omap_opp_data.h"
 #include "voltage.h"
diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c
index 9148b229d0de..410291c67666 100644
--- a/arch/arm/mach-orion5x/common.c
+++ b/arch/arm/mach-orion5x/common.c
@@ -109,7 +109,8 @@ void __init orion5x_eth_init(struct mv643xx_eth_platform_data *eth_data)
 {
        orion_ge00_init(eth_data,
                        ORION5X_ETH_PHYS_BASE, IRQ_ORION5X_ETH_SUM,
-                        IRQ_ORION5X_ETH_ERR);
+                        IRQ_ORION5X_ETH_ERR,
+                        MV643XX_TX_CSUM_DEFAULT_LIMIT);
 }
diff --git a/arch/arm/mach-s3c24xx/include/mach/dma.h b/arch/arm/mach-s3c24xx/include/mach/dma.h
index 454831b66037..ee99fd56c043 100644
--- a/arch/arm/mach-s3c24xx/include/mach/dma.h
+++ b/arch/arm/mach-s3c24xx/include/mach/dma.h
@@ -24,7 +24,8 @@
 */
 enum dma_ch {
-        DMACH_XD0,
+        DMACH_DT_PROP = -1,     /* not yet supported, do not use */
+        DMACH_XD0 = 0,
        DMACH_XD1,
        DMACH_SDI,
        DMACH_SPI0,
diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c
index cf10f92856dc..453a6e50db8b 100644
--- a/arch/arm/mach-shmobile/board-armadillo800eva.c
+++ b/arch/arm/mach-shmobile/board-armadillo800eva.c
@@ -520,13 +520,14 @@ static struct platform_device hdmi_lcdc_device = {
 };
 /* GPIO KEY */
-#define GPIO_KEY(c, g, d) { .code = c, .gpio = g, .desc = d, .active_low = 1 }
+#define GPIO_KEY(c, g, d, ...) \
+        { .code = c, .gpio = g, .desc = d, .active_low = 1, __VA_ARGS__ }
 static struct gpio_keys_button gpio_buttons[] = {
-        GPIO_KEY(KEY_POWER,     GPIO_PORT99,    "SW1"),
+        GPIO_KEY(KEY_POWER,     GPIO_PORT99,    "SW3", .wakeup = 1),
-        GPIO_KEY(KEY_BACK,      GPIO_PORT100,   "SW2"),
+        GPIO_KEY(KEY_BACK,      GPIO_PORT100,   "SW4"),
-        GPIO_KEY(KEY_MENU,      GPIO_PORT97,    "SW3"),
+        GPIO_KEY(KEY_MENU,      GPIO_PORT97,    "SW5"),
-        GPIO_KEY(KEY_HOME,      GPIO_PORT98,    "SW4"),
+        GPIO_KEY(KEY_HOME,      GPIO_PORT98,    "SW6"),
 };
 static struct gpio_keys_platform_data gpio_key_info = {
@@ -901,8 +902,8 @@ static struct platform_device *eva_devices[] __initdata = {
        &camera_device,
        &ceu0_device,
        &fsi_device,
-        &fsi_hdmi_device,
        &fsi_wm8978_device,
+        &fsi_hdmi_device,
 };
 static void __init eva_clock_init(void)
diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c
index 7ea2b31e3199..c129542f6aed 100644
--- a/arch/arm/mach-shmobile/board-mackerel.c
+++ b/arch/arm/mach-shmobile/board-mackerel.c
@@ -695,6 +695,7 @@ static struct platform_device usbhs0_device = {
 *  - J30 "open"
 *  - modify usbhs1_get_id() USBHS_HOST -> USBHS_GADGET
 *  - add .get_vbus = usbhs_get_vbus in usbhs1_private
+ *  - check usbhs0_device(pio)/usbhs1_device(irq) order in mackerel_devices.
 */
 #define IRQ8 evt2irq(0x0300)
 #define USB_PHY_MODE            (1 << 4)
@@ -1325,8 +1326,8 @@ static struct platform_device *mackerel_devices[] __initdata = {
        &nor_flash_device,
        &smc911x_device,
        &lcdc_device,
-        &usbhs1_device,
        &usbhs0_device,
+        &usbhs1_device,
        &leds_device,
        &fsi_device,
        &fsi_ak4643_device,
diff --git a/arch/arm/mach-shmobile/board-marzen.c b/arch/arm/mach-shmobile/board-marzen.c
index 3a528cf4366c..fcf5a47f4772 100644
--- a/arch/arm/mach-shmobile/board-marzen.c
+++ b/arch/arm/mach-shmobile/board-marzen.c
@@ -67,7 +67,7 @@ static struct smsc911x_platform_config smsc911x_platdata = {
 static struct platform_device eth_device = {
        .name           = "smsc911x",
-        .id             = 0,
+        .id             = -1,
        .dev  = {
                .platform_data = &smsc911x_platdata,
        },
diff --git a/arch/arm/mach-shmobile/intc-sh73a0.c b/arch/arm/mach-shmobile/intc-sh73a0.c
index ee447404c857..588555a67d9c 100644
--- a/arch/arm/mach-shmobile/intc-sh73a0.c
+++ b/arch/arm/mach-shmobile/intc-sh73a0.c
@@ -259,9 +259,9 @@ static int sh73a0_set_wake(struct irq_data *data, unsigned int on)
        return 0; /* always allow wakeup */
 }
-#define RELOC_BASE 0x1000
+#define RELOC_BASE 0x1200
-/* INTCA IRQ pins at INTCS + 0x1000 to make space for GIC+INTC handling */
+/* INTCA IRQ pins at INTCS + RELOC_BASE to make space for GIC+INTC handling */
 #define INTCS_VECT_RELOC(n, vect) INTCS_VECT((n), (vect) + RELOC_BASE)
 INTC_IRQ_PINS_32(intca_irq_pins, 0xe6900000,
diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig
index c013bbf79cac..53d3d46dec12 100644
--- a/arch/arm/mach-ux500/Kconfig
+++ b/arch/arm/mach-ux500/Kconfig
@@ -41,7 +41,6 @@ config MACH_HREFV60
 config MACH_SNOWBALL
        bool "U8500 Snowball platform"
        select MACH_MOP500
-        select LEDS_GPIO
        help
          Include support for the snowball development platform.
diff --git a/arch/arm/mach-ux500/board-mop500-msp.c b/arch/arm/mach-ux500/board-mop500-msp.c
index 996048038743..df15646036aa 100644
--- a/arch/arm/mach-ux500/board-mop500-msp.c
+++ b/arch/arm/mach-ux500/board-mop500-msp.c
@@ -191,9 +191,9 @@ static struct platform_device *db8500_add_msp_i2s(struct device *parent,
        return pdev;
 }
-/* Platform device for ASoC U8500 machine */
+/* Platform device for ASoC MOP500 machine */
-static struct platform_device snd_soc_u8500 = {
+static struct platform_device snd_soc_mop500 = {
-                .name = "snd-soc-u8500",
+                .name = "snd-soc-mop500",
                .id = 0,
                .dev = {
                        .platform_data = NULL,
@@ -227,8 +227,8 @@ int mop500_msp_init(struct device *parent)
 {
        struct platform_device *msp1;
-        pr_info("%s: Register platform-device 'snd-soc-u8500'.\n", __func__);
+        pr_info("%s: Register platform-device 'snd-soc-mop500'.\n", __func__);
-        platform_device_register(&snd_soc_u8500);
+        platform_device_register(&snd_soc_mop500);
        pr_info("Initialize MSP I2S-devices.\n");
        db8500_add_msp_i2s(parent, 0, U8500_MSP0_BASE, IRQ_DB8500_MSP0,
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index 8674a890fd1c..1d2e3c6f8b59 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -524,33 +524,12 @@ static struct stedma40_chan_cfg uart2_dma_cfg_tx = {
 };
 #endif
-#define PRCC_K_SOFTRST_SET      0x18
-#define PRCC_K_SOFTRST_CLEAR    0x1C
-static void ux500_uart0_reset(void)
-{
-        void __iomem *prcc_rst_set, *prcc_rst_clr;
-        prcc_rst_set = (void __iomem *)IO_ADDRESS(U8500_CLKRST1_BASE +
-                        PRCC_K_SOFTRST_SET);
-        prcc_rst_clr = (void __iomem *)IO_ADDRESS(U8500_CLKRST1_BASE +
-                        PRCC_K_SOFTRST_CLEAR);
-        /* Activate soft reset PRCC_K_SOFTRST_CLEAR */
-        writel((readl(prcc_rst_clr) | 0x1), prcc_rst_clr);
-        udelay(1);
-        /* Release soft reset PRCC_K_SOFTRST_SET */
-        writel((readl(prcc_rst_set) | 0x1), prcc_rst_set);
-        udelay(1);
-}
 static struct amba_pl011_data uart0_plat = {
 #ifdef CONFIG_STE_DMA40
        .dma_filter = stedma40_filter,
        .dma_rx_param = &uart0_dma_cfg_rx,
        .dma_tx_param = &uart0_dma_cfg_tx,
 #endif
-        .reset = ux500_uart0_reset,
 };
 static struct amba_pl011_data uart1_plat = {
@@ -797,6 +776,7 @@ static void __init u8500_init_machine(void)
                                ARRAY_SIZE(mop500_platform_devs));
                mop500_sdi_init(parent);
+                mop500_msp_init(parent);
                i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
                i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs);
                i2c_register_board_info(2, mop500_i2c2_devices,
@@ -804,6 +784,8 @@ static void __init u8500_init_machine(void)
                mop500_uib_init();
+        } else if (of_machine_is_compatible("calaosystems,snowball-a9500")) {
+                mop500_msp_init(parent);
        } else if (of_machine_is_compatible("st-ericsson,hrefv60+")) {
                /*
                 * The HREFv60 board removed a GPIO expander and routed
@@ -815,6 +797,7 @@ static void __init u8500_init_machine(void)
                                ARRAY_SIZE(mop500_platform_devs));
                hrefv60_sdi_init(parent);
+                mop500_msp_init(parent);
                i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
                i2c0_devs -= NUM_PRE_V60_I2C0_DEVICES;
diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c
index 4e7d1182e8a3..051204fc4617 100644
--- a/arch/arm/mm/dma-mapping.c
+++ b/arch/arm/mm/dma-mapping.c
@@ -267,17 +267,19 @@ static void __dma_free_remap(void *cpu_addr, size_t size)
        vunmap(cpu_addr);
 }
+#define DEFAULT_DMA_COHERENT_POOL_SIZE  SZ_256K
 struct dma_pool {
        size_t size;
        spinlock_t lock;
        unsigned long *bitmap;
        unsigned long nr_pages;
        void *vaddr;
-        struct page *page;
+        struct page **pages;
 };
 static struct dma_pool atomic_pool = {
-        .size = SZ_256K,
+        .size = DEFAULT_DMA_COHERENT_POOL_SIZE,
 };
 static int __init early_coherent_pool(char *p)
@@ -287,6 +289,21 @@ static int __init early_coherent_pool(char *p)
 }
 early_param("coherent_pool", early_coherent_pool);
+void __init init_dma_coherent_pool_size(unsigned long size)
+{
+        /*
+         * Catch any attempt to set the pool size too late.
+         */
+        BUG_ON(atomic_pool.vaddr);
+        /*
+         * Set architecture specific coherent pool size only if
+         * it has not been changed by kernel command line parameter.
+         */
+        if (atomic_pool.size == DEFAULT_DMA_COHERENT_POOL_SIZE)
+                atomic_pool.size = size;
+}
 /*
 * Initialise the coherent pool for atomic allocations.
 */
@@ -297,6 +314,7 @@ static int __init atomic_pool_init(void)
        unsigned long nr_pages = pool->size >> PAGE_SHIFT;
        unsigned long *bitmap;
        struct page *page;
+        struct page **pages;
        void *ptr;
        int bitmap_size = BITS_TO_LONGS(nr_pages) * sizeof(long);
@@ -304,21 +322,31 @@ static int __init atomic_pool_init(void)
        if (!bitmap)
                goto no_bitmap;
+        pages = kzalloc(nr_pages * sizeof(struct page *), GFP_KERNEL);
+        if (!pages)
+                goto no_pages;
        if (IS_ENABLED(CONFIG_CMA))
                ptr = __alloc_from_contiguous(NULL, pool->size, prot, &page);
        else
                ptr = __alloc_remap_buffer(NULL, pool->size, GFP_KERNEL, prot,
                                           &page, NULL);
        if (ptr) {
+                int i;
+                for (i = 0; i < nr_pages; i++)
+                        pages[i] = page + i;
                spin_lock_init(&pool->lock);
                pool->vaddr = ptr;
-                pool->page = page;
+                pool->pages = pages;
                pool->bitmap = bitmap;
                pool->nr_pages = nr_pages;
                pr_info("DMA: preallocated %u KiB pool for atomic coherent allocations\n",
                       (unsigned)pool->size / 1024);
                return 0;
        }
+no_pages:
        kfree(bitmap);
 no_bitmap:
        pr_err("DMA: failed to allocate %u KiB pool for atomic coherent allocation\n",
@@ -443,27 +471,45 @@ static void *__alloc_from_pool(size_t size, struct page **ret_page)
        if (pageno < pool->nr_pages) {
                bitmap_set(pool->bitmap, pageno, count);
                ptr = pool->vaddr + PAGE_SIZE * pageno;
-                *ret_page = pool->page + pageno;
+                *ret_page = pool->pages[pageno];
+        } else {
+                pr_err_once("ERROR: %u KiB atomic DMA coherent pool is too small!\n"
+                            "Please increase it with coherent_pool= kernel parameter!\n",
+                            (unsigned)pool->size / 1024);
        }
        spin_unlock_irqrestore(&pool->lock, flags);
        return ptr;
 }
+static bool __in_atomic_pool(void *start, size_t size)
+{
+        struct dma_pool *pool = &atomic_pool;
+        void *end = start + size;
+        void *pool_start = pool->vaddr;
+        void *pool_end = pool->vaddr + pool->size;
+        if (start < pool_start || start > pool_end)
+                return false;
+        if (end <= pool_end)
+                return true;
+        WARN(1, "Wrong coherent size(%p-%p) from atomic pool(%p-%p)\n",
+             start, end - 1, pool_start, pool_end - 1);
+        return false;
+}
 static int __free_from_pool(void *start, size_t size)
 {
        struct dma_pool *pool = &atomic_pool;
        unsigned long pageno, count;
        unsigned long flags;
-        if (start < pool->vaddr || start > pool->vaddr + pool->size)
+        if (!__in_atomic_pool(start, size))
                return 0;
-        if (start + size > pool->vaddr + pool->size) {
-                WARN(1, "freeing wrong coherent size from pool\n");
-                return 0;
-        }
        pageno = (start - pool->vaddr) >> PAGE_SHIFT;
        count = size >> PAGE_SHIFT;
@@ -1090,10 +1136,22 @@ static int __iommu_remove_mapping(struct device *dev, dma_addr_t iova, size_t si
        return 0;
 }
+static struct page **__atomic_get_pages(void *addr)
+{
+        struct dma_pool *pool = &atomic_pool;
+        struct page **pages = pool->pages;
+        int offs = (addr - pool->vaddr) >> PAGE_SHIFT;
+        return pages + offs;
+}
 static struct page **__iommu_get_pages(void *cpu_addr, struct dma_attrs *attrs)
 {
        struct vm_struct *area;
+        if (__in_atomic_pool(cpu_addr, PAGE_SIZE))
+                return __atomic_get_pages(cpu_addr);
        if (dma_get_attr(DMA_ATTR_NO_KERNEL_MAPPING, attrs))
                return cpu_addr;
@@ -1103,6 +1161,34 @@ static struct page **__iommu_get_pages(void *cpu_addr, struct dma_attrs *attrs)
        return NULL;
 }
+static void *__iommu_alloc_atomic(struct device *dev, size_t size,
+                                  dma_addr_t *handle)
+{
+        struct page *page;
+        void *addr;
+        addr = __alloc_from_pool(size, &page);
+        if (!addr)
+                return NULL;
+        *handle = __iommu_create_mapping(dev, &page, size);
+        if (*handle == DMA_ERROR_CODE)
+                goto err_mapping;
+        return addr;
+err_mapping:
+        __free_from_pool(addr, size);
+        return NULL;
+}
+static void __iommu_free_atomic(struct device *dev, struct page **pages,
+                                dma_addr_t handle, size_t size)
+{
+        __iommu_remove_mapping(dev, handle, size);
+        __free_from_pool(page_address(pages[0]), size);
+}
 static void *arm_iommu_alloc_attrs(struct device *dev, size_t size,
            dma_addr_t *handle, gfp_t gfp, struct dma_attrs *attrs)
 {
@@ -1113,6 +1199,9 @@ static void *arm_iommu_alloc_attrs(struct device *dev, size_t size,
        *handle = DMA_ERROR_CODE;
        size = PAGE_ALIGN(size);
+        if (gfp & GFP_ATOMIC)
+                return __iommu_alloc_atomic(dev, size, handle);
        pages = __iommu_alloc_buffer(dev, size, gfp);
        if (!pages)
                return NULL;
@@ -1179,6 +1268,11 @@ void arm_iommu_free_attrs(struct device *dev, size_t size, void *cpu_addr,
                return;
        }
+        if (__in_atomic_pool(cpu_addr, size)) {
+                __iommu_free_atomic(dev, pages, handle, size);
+                return;
+        }
        if (!dma_get_attr(DMA_ATTR_NO_KERNEL_MAPPING, attrs)) {
                unmap_kernel_range((unsigned long)cpu_addr, size);
                vunmap(cpu_addr);
diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
index dd36eba9506c..d15a4a6d6146 100644
--- a/arch/arm/plat-omap/Kconfig
+++ b/arch/arm/plat-omap/Kconfig
@@ -25,6 +25,7 @@ config ARCH_OMAP2PLUS
        bool "TI OMAP2/3/4"
        select CLKDEV_LOOKUP
        select GENERIC_IRQ_CHIP
+        select SPARSE_IRQ
        select OMAP_DM_TIMER
        select USE_OF
        select PROC_DEVICETREE if PROC_FS
diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile
index 961bf859bc0c..a017e994e006 100644
--- a/arch/arm/plat-omap/Makefile
+++ b/arch/arm/plat-omap/Makefile
@@ -3,8 +3,7 @@
 #
 # Common support
-obj-y := common.o sram.o clock.o devices.o dma.o mux.o \
+obj-y := common.o sram.o clock.o dma.o mux.o fb.o counter_32k.o
-         fb.o counter_32k.o
 obj-m :=
 obj-n :=
 obj-  :=
diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c
index 89a3723b3538..e5778ed689d8 100644
--- a/arch/arm/plat-omap/common.c
+++ b/arch/arm/plat-omap/common.c
@@ -17,52 +17,12 @@
 #include <linux/dma-mapping.h>
 #include <plat/common.h>
-#include <plat/board.h>
 #include <plat/vram.h>
 #include <plat/dsp.h>
 #include <plat/dma.h>
 #include <plat/omap-secure.h>
-#define NO_LENGTH_CHECK 0xffffffff
-struct omap_board_config_kernel *omap_board_config __initdata;
-int omap_board_config_size;
-static const void *__init get_config(u16 tag, size_t len,
-                int skip, size_t *len_out)
-{
-        struct omap_board_config_kernel *kinfo = NULL;
-        int i;
-        /* Try to find the config from the board-specific structures
-         * in the kernel. */
-        for (i = 0; i < omap_board_config_size; i++) {
-                if (omap_board_config[i].tag == tag) {
-                        if (skip == 0) {
-                                kinfo = &omap_board_config[i];
-                                break;
-                        } else {
-                                skip--;
-                        }
-                }
-        }
-        if (kinfo == NULL)
-                return NULL;
-        return kinfo->data;
-}
-const void *__init __omap_get_config(u16 tag, size_t len, int nr)
-{
-        return get_config(tag, len, nr, NULL);
-}
-const void *__init omap_get_var_config(u16 tag, size_t *len)
-{
-        return get_config(tag, NO_LENGTH_CHECK, 0, len);
-}
 void __init omap_reserve(void)
 {
        omap_vram_reserve_sdram_memblock();
diff --git a/arch/arm/plat-omap/counter_32k.c b/arch/arm/plat-omap/counter_32k.c
index dbf1e03029a5..2e826f1faf7b 100644
--- a/arch/arm/plat-omap/counter_32k.c
+++ b/arch/arm/plat-omap/counter_32k.c
@@ -22,10 +22,7 @@
 #include <asm/mach/time.h>
 #include <asm/sched_clock.h>
-#include <plat/hardware.h>
 #include <plat/common.h>
-#include <plat/board.h>
 #include <plat/clock.h>
 /* OMAP2_32KSYNCNT_CR_OFF: offset of 32ksync counter register */
diff --git a/arch/arm/plat-omap/debug-devices.c b/arch/arm/plat-omap/debug-devices.c
index caa1f7b6cc21..c7a4c0902b38 100644
--- a/arch/arm/plat-omap/debug-devices.c
+++ b/arch/arm/plat-omap/debug-devices.c
@@ -17,9 +17,6 @@
 #include <mach/hardware.h>
-#include <plat/board.h>
 /* Many OMAP development platforms reuse the same "debug board"; these
 * platforms include H2, H3, H4, and Perseus2.
 */
diff --git a/arch/arm/plat-omap/debug-leds.c b/arch/arm/plat-omap/debug-leds.c
index 39407cbe34c6..195aaae65872 100644
--- a/arch/arm/plat-omap/debug-leds.c
+++ b/arch/arm/plat-omap/debug-leds.c
@@ -12,6 +12,7 @@
 #include <linux/platform_device.h>
 #include <linux/leds.h>
 #include <linux/io.h>
+#include <linux/platform_data/gpio-omap.h>
 #include <mach/hardware.h>
 #include <asm/leds.h>
diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c
deleted file mode 100644
index 1cba9273d2cb..000000000000
--- a/arch/arm/plat-omap/devices.c
+++ /dev/null
@@ -1,92 +0,0 @@
-/*
- * linux/arch/arm/plat-omap/devices.c
- *
- * Common platform device setup/initialization for OMAP1 and OMAP2
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-#include <linux/gpio.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-#include <linux/memblock.h>
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/map.h>
-#include <asm/memblock.h>
-#include <plat/tc.h>
-#include <plat/board.h>
-#include <plat/mmc.h>
-#include <plat/menelaus.h>
-#include <plat/omap44xx.h>
-/*-------------------------------------------------------------------------*/
-#if defined(CONFIG_HW_RANDOM_OMAP) || defined(CONFIG_HW_RANDOM_OMAP_MODULE)
-#ifdef CONFIG_ARCH_OMAP2
-#define OMAP_RNG_BASE           0x480A0000
-#else
-#define OMAP_RNG_BASE           0xfffe5000
-#endif
-static struct resource rng_resources[] = {
-        {
-                .start          = OMAP_RNG_BASE,
-                .end            = OMAP_RNG_BASE + 0x4f,
-                .flags          = IORESOURCE_MEM,
-        },
-};
-static struct platform_device omap_rng_device = {
-        .name           = "omap_rng",
-        .id             = -1,
-        .num_resources  = ARRAY_SIZE(rng_resources),
-        .resource       = rng_resources,
-};
-static void omap_init_rng(void)
-{
-        (void) platform_device_register(&omap_rng_device);
-}
-#else
-static inline void omap_init_rng(void) {}
-#endif
-/*
- * This gets called after board-specific INIT_MACHINE, and initializes most
- * on-chip peripherals accessible on this board (except for few like USB):
- *
- *  (a) Does any "standard config" pin muxing needed.  Board-specific
- *      code will have muxed GPIO pins and done "nonstandard" setup;
- *      that code could live in the boot loader.
- *  (b) Populating board-specific platform_data with the data drivers
- *      rely on to handle wiring variations.
- *  (c) Creating platform devices as meaningful on this board and
- *      with this kernel configuration.
- *
- * Claiming GPIOs, and setting their direction and initial values, is the
- * responsibility of the device drivers.  So is responding to probe().
- *
- * Board-specific knowledge like creating devices or pin setup is to be
- * kept out of drivers as much as possible.  In particular, pin setup
- * may be handled by the boot loader, and drivers should expect it will
- * normally have been done by the time they're probed.
- */
-static int __init omap_init_devices(void)
-{
-        /* please keep these calls, and their implementations above,
-         * in alphabetical order so they're easier to sort through.
-         */
-        omap_init_rng();
-        return 0;
-}
-arch_initcall(omap_init_devices);
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index 7fe626761e53..6dcad5873d57 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -36,9 +36,8 @@
 #include <linux/slab.h>
 #include <linux/delay.h>
-#include <mach/hardware.h>
+#include <plat/cpu.h>
 #include <plat/dma.h>
 #include <plat/tc.h>
 /*
diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c
index 626ad8cad7a9..938b50a33439 100644
--- a/arch/arm/plat-omap/dmtimer.c
+++ b/arch/arm/plat-omap/dmtimer.c
@@ -189,6 +189,7 @@ struct omap_dm_timer *omap_dm_timer_request(void)
                timer->reserved = 1;
                break;
        }
+        spin_unlock_irqrestore(&dm_timer_lock, flags);
        if (timer) {
                ret = omap_dm_timer_prepare(timer);
@@ -197,7 +198,6 @@ struct omap_dm_timer *omap_dm_timer_request(void)
                        timer = NULL;
                }
        }
-        spin_unlock_irqrestore(&dm_timer_lock, flags);
        if (!timer)
                pr_debug("%s: timer request failed!\n", __func__);
@@ -220,6 +220,7 @@ struct omap_dm_timer *omap_dm_timer_request_specific(int id)
                        break;
                }
        }
+        spin_unlock_irqrestore(&dm_timer_lock, flags);
        if (timer) {
                ret = omap_dm_timer_prepare(timer);
@@ -228,7 +229,6 @@ struct omap_dm_timer *omap_dm_timer_request_specific(int id)
                        timer = NULL;
                }
        }
-        spin_unlock_irqrestore(&dm_timer_lock, flags);
        if (!timer)
                pr_debug("%s: timer%d request failed!\n", __func__, id);
@@ -258,7 +258,7 @@ EXPORT_SYMBOL_GPL(omap_dm_timer_enable);
 void omap_dm_timer_disable(struct omap_dm_timer *timer)
 {
-        pm_runtime_put(&timer->pdev->dev);
+        pm_runtime_put_sync(&timer->pdev->dev);
 }
 EXPORT_SYMBOL_GPL(omap_dm_timer_disable);
diff --git a/arch/arm/plat-omap/fb.c b/arch/arm/plat-omap/fb.c
index dd6f92c99e56..bcbb9d5dc293 100644
--- a/arch/arm/plat-omap/fb.c
+++ b/arch/arm/plat-omap/fb.c
@@ -33,8 +33,6 @@
 #include <mach/hardware.h>
 #include <asm/mach/map.h>
-#include <plat/board.h>
 #if defined(CONFIG_FB_OMAP) || defined(CONFIG_FB_OMAP_MODULE)
 static bool omapfb_lcd_configured;
diff --git a/arch/arm/plat-omap/i2c.c b/arch/arm/plat-omap/i2c.c
index db071bc71c4d..40bc06a7ac43 100644
--- a/arch/arm/plat-omap/i2c.c
+++ b/arch/arm/plat-omap/i2c.c
@@ -39,6 +39,7 @@
 #define OMAP_I2C_SIZE           0x3f
 #define OMAP1_I2C_BASE          0xfffb3800
+#define OMAP1_INT_I2C           (32 + 4)
 static const char name[] = "omap_i2c";
@@ -105,7 +106,7 @@ static inline int omap1_i2c_add_bus(int bus_id)
        res = pdev->resource;
        res[0].start = OMAP1_I2C_BASE;
        res[0].end = res[0].start + OMAP_I2C_SIZE;
-        res[1].start = INT_I2C;
+        res[1].start = OMAP1_INT_I2C;
        pdata = &i2c_pdata[bus_id - 1];
        /* all OMAP1 have IP version 1 register set */
diff --git a/arch/arm/plat-omap/include/plat/board.h b/arch/arm/plat-omap/include/plat/board.h
deleted file mode 100644
index e62f20a5c0af..000000000000
--- a/arch/arm/plat-omap/include/plat/board.h
+++ /dev/null
@@ -1,138 +0,0 @@
-/*
- *  arch/arm/plat-omap/include/mach/board.h
- *
- *  Information structures for board-specific data
- *
- *  Copyright (C) 2004  Nokia Corporation
- *  Written by Juha Yrjölä <juha.yrjola@nokia.com>
- */
-#ifndef _OMAP_BOARD_H
-#define _OMAP_BOARD_H
-#include <linux/types.h>
-#include <plat/gpio-switch.h>
-/*
- * OMAP35x EVM revision
- * Run time detection of EVM revision is done by reading Ethernet
- * PHY ID -
- *      GEN_1   = 0x01150000
- *      GEN_2   = 0x92200000
- */
-enum {
-        OMAP3EVM_BOARD_GEN_1 = 0,       /* EVM Rev between  A - D */
-        OMAP3EVM_BOARD_GEN_2,           /* EVM Rev >= Rev E */
-};
-/* Different peripheral ids */
-#define OMAP_TAG_CLOCK          0x4f01
-#define OMAP_TAG_GPIO_SWITCH    0x4f06
-#define OMAP_TAG_STI_CONSOLE    0x4f09
-#define OMAP_TAG_CAMERA_SENSOR  0x4f0a
-#define OMAP_TAG_BOOT_REASON    0x4f80
-#define OMAP_TAG_FLASH_PART     0x4f81
-#define OMAP_TAG_VERSION_STR    0x4f82
-struct omap_clock_config {
-        /* 0 for 12 MHz, 1 for 13 MHz and 2 for 19.2 MHz */
-        u8 system_clock_type;
-};
-struct omap_serial_console_config {
-        u8 console_uart;
-        u32 console_speed;
-};
-struct omap_sti_console_config {
-        unsigned enable:1;
-        u8 channel;
-};
-struct omap_camera_sensor_config {
-        u16 reset_gpio;
-        int (*power_on)(void * data);
-        int (*power_off)(void * data);
-};
-struct omap_lcd_config {
-        char panel_name[16];
-        char ctrl_name[16];
-        s16  nreset_gpio;
-        u8   data_lines;
-};
-struct device;
-struct fb_info;
-struct omap_backlight_config {
-        int default_intensity;
-        int (*set_power)(struct device *dev, int state);
-};
-struct omap_fbmem_config {
-        u32 start;
-        u32 size;
-};
-struct omap_pwm_led_platform_data {
-        const char *name;
-        int intensity_timer;
-        int blink_timer;
-        void (*set_power)(struct omap_pwm_led_platform_data *self, int on_off);
-};
-struct omap_uart_config {
-        /* Bit field of UARTs present; bit 0 --> UART1 */
-        unsigned int enabled_uarts;
-};
-struct omap_flash_part_config {
-        char part_table[0];
-};
-struct omap_boot_reason_config {
-        char reason_str[12];
-};
-struct omap_version_config {
-        char component[12];
-        char version[12];
-};
-struct omap_board_config_entry {
-        u16 tag;
-        u16 len;
-        u8  data[0];
-};
-struct omap_board_config_kernel {
-        u16 tag;
-        const void *data;
-};
-extern const void *__init __omap_get_config(u16 tag, size_t len, int nr);
-#define omap_get_config(tag, type) \
-        ((const type *) __omap_get_config((tag), sizeof(type), 0))
-#define omap_get_nr_config(tag, type, nr) \
-        ((const type *) __omap_get_config((tag), sizeof(type), (nr)))
-extern const void *__init omap_get_var_config(u16 tag, size_t *len);
-extern struct omap_board_config_kernel *omap_board_config;
-extern int omap_board_config_size;
-/* for TI reference platforms sharing the same debug card */
-extern int debug_card_init(u32 addr, unsigned gpio);
-/* OMAP3EVM revision */
-#if defined(CONFIG_MACH_OMAP3EVM)
-u8 get_omap3_evm_rev(void);
-#else
-#define get_omap3_evm_rev() (-EINVAL)
-#endif
-#endif
diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h
index 68b180edcfff..67da857783ce 100644
--- a/arch/arm/plat-omap/include/plat/cpu.h
+++ b/arch/arm/plat-omap/include/plat/cpu.h
@@ -30,6 +30,8 @@
 #ifndef __ASM_ARCH_OMAP_CPU_H
 #define __ASM_ARCH_OMAP_CPU_H
+#ifndef __ASSEMBLY__
 #include <linux/bitops.h>
 #include <plat/multi.h>
@@ -372,7 +374,8 @@ IS_OMAP_TYPE(3430, 0x3430)
 #define cpu_class_is_omap1()    (cpu_is_omap7xx() || cpu_is_omap15xx() || \
                                cpu_is_omap16xx())
 #define cpu_class_is_omap2()    (cpu_is_omap24xx() || cpu_is_omap34xx() || \
-                                cpu_is_omap44xx() || soc_is_omap54xx())
+                                cpu_is_omap44xx() || soc_is_omap54xx() || \
+                                soc_is_am33xx())
 /* Various silicon revisions for omap2 */
 #define OMAP242X_CLASS          0x24200024
@@ -492,4 +495,5 @@ OMAP4_HAS_FEATURE(mpu_1ghz, MPU_1GHZ)
 OMAP4_HAS_FEATURE(mpu_1_2ghz, MPU_1_2GHZ)
 OMAP4_HAS_FEATURE(mpu_1_5ghz, MPU_1_5GHZ)
+#endif  /* __ASSEMBLY__ */
 #endif
diff --git a/arch/arm/plat-omap/include/plat/debug-devices.h b/arch/arm/plat-omap/include/plat/debug-devices.h
new file mode 100644
index 000000000000..a4edbd2f7484
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/debug-devices.h
@@ -0,0 +1,9 @@
+#ifndef _OMAP_DEBUG_DEVICES_H
+#define _OMAP_DEBUG_DEVICES_H
+#include <linux/types.h>
+/* for TI reference platforms sharing the same debug card */
+extern int debug_card_init(u32 addr, unsigned gpio);
+#endif
diff --git a/arch/arm/plat-omap/include/plat/dma.h b/arch/arm/plat-omap/include/plat/dma.h
index c5811d4409b0..0a87b052f8f7 100644
--- a/arch/arm/plat-omap/include/plat/dma.h
+++ b/arch/arm/plat-omap/include/plat/dma.h
@@ -31,6 +31,8 @@
 /* Move omap4 specific defines to dma-44xx.h */
 #include "dma-44xx.h"
+#define INT_DMA_LCD                     25
 /* DMA channels for omap1 */
 #define OMAP_DMA_NO_DEVICE              0
 #define OMAP_DMA_MCSI1_TX               1
diff --git a/arch/arm/plat-omap/include/plat/gpio-switch.h b/arch/arm/plat-omap/include/plat/gpio-switch.h
deleted file mode 100644
index 10da0e07c0cf..000000000000
--- a/arch/arm/plat-omap/include/plat/gpio-switch.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * GPIO switch definitions
- *
- * Copyright (C) 2006 Nokia Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_OMAP_GPIO_SWITCH_H
-#define __ASM_ARCH_OMAP_GPIO_SWITCH_H
-#include <linux/types.h>
-/* Cover:
- *      high -> closed
- *      low  -> open
- * Connection:
- *      high -> connected
- *      low  -> disconnected
- * Activity:
- *      high -> active
- *      low  -> inactive
- *
- */
-#define OMAP_GPIO_SWITCH_TYPE_COVER             0x0000
-#define OMAP_GPIO_SWITCH_TYPE_CONNECTION        0x0001
-#define OMAP_GPIO_SWITCH_TYPE_ACTIVITY          0x0002
-#define OMAP_GPIO_SWITCH_FLAG_INVERTED          0x0001
-#define OMAP_GPIO_SWITCH_FLAG_OUTPUT            0x0002
-struct omap_gpio_switch {
-        const char *name;
-        s16 gpio;
-        unsigned flags:4;
-        unsigned type:4;
-        /* Time in ms to debounce when transitioning from
-         * inactive state to active state. */
-        u16 debounce_rising;
-        /* Same for transition from active to inactive state. */
-        u16 debounce_falling;
-        /* notify board-specific code about state changes */
-        void (* notify)(void *data, int state);
-        void *notify_data;
-};
-/* Call at init time only */
-extern void omap_register_gpio_switches(const struct omap_gpio_switch *tbl,
-                                        int count);
-#endif
diff --git a/arch/arm/plat-omap/include/plat/gpio.h b/arch/arm/plat-omap/include/plat/gpio.h
deleted file mode 100644
index 50fb7cc000ea..000000000000
--- a/arch/arm/plat-omap/include/plat/gpio.h
+++ /dev/null
@@ -1,228 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/gpio.h
- *
- * OMAP GPIO handling defines and functions
- *
- * Copyright (C) 2003-2005 Nokia Corporation
- *
- * Written by Juha Yrjölä <juha.yrjola@nokia.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-#ifndef __ASM_ARCH_OMAP_GPIO_H
-#define __ASM_ARCH_OMAP_GPIO_H
-#include <linux/io.h>
-#include <linux/platform_device.h>
-#include <mach/irqs.h>
-#define OMAP1_MPUIO_BASE                        0xfffb5000
-/*
- * These are the omap15xx/16xx offsets. The omap7xx offset are
- * OMAP_MPUIO_ / 2 offsets below.
- */
-#define OMAP_MPUIO_INPUT_LATCH          0x00
-#define OMAP_MPUIO_OUTPUT               0x04
-#define OMAP_MPUIO_IO_CNTL              0x08
-#define OMAP_MPUIO_KBR_LATCH            0x10
-#define OMAP_MPUIO_KBC                  0x14
-#define OMAP_MPUIO_GPIO_EVENT_MODE      0x18
-#define OMAP_MPUIO_GPIO_INT_EDGE        0x1c
-#define OMAP_MPUIO_KBD_INT              0x20
-#define OMAP_MPUIO_GPIO_INT             0x24
-#define OMAP_MPUIO_KBD_MASKIT           0x28
-#define OMAP_MPUIO_GPIO_MASKIT          0x2c
-#define OMAP_MPUIO_GPIO_DEBOUNCING      0x30
-#define OMAP_MPUIO_LATCH                0x34
-#define OMAP34XX_NR_GPIOS               6
-/*
- * OMAP1510 GPIO registers
- */
-#define OMAP1510_GPIO_DATA_INPUT        0x00
-#define OMAP1510_GPIO_DATA_OUTPUT       0x04
-#define OMAP1510_GPIO_DIR_CONTROL       0x08
-#define OMAP1510_GPIO_INT_CONTROL       0x0c
-#define OMAP1510_GPIO_INT_MASK          0x10
-#define OMAP1510_GPIO_INT_STATUS        0x14
-#define OMAP1510_GPIO_PIN_CONTROL       0x18
-#define OMAP1510_IH_GPIO_BASE           64
-/*
- * OMAP1610 specific GPIO registers
- */
-#define OMAP1610_GPIO_REVISION          0x0000
-#define OMAP1610_GPIO_SYSCONFIG         0x0010
-#define OMAP1610_GPIO_SYSSTATUS         0x0014
-#define OMAP1610_GPIO_IRQSTATUS1        0x0018
-#define OMAP1610_GPIO_IRQENABLE1        0x001c
-#define OMAP1610_GPIO_WAKEUPENABLE      0x0028
-#define OMAP1610_GPIO_DATAIN            0x002c
-#define OMAP1610_GPIO_DATAOUT           0x0030
-#define OMAP1610_GPIO_DIRECTION         0x0034
-#define OMAP1610_GPIO_EDGE_CTRL1        0x0038
-#define OMAP1610_GPIO_EDGE_CTRL2        0x003c
-#define OMAP1610_GPIO_CLEAR_IRQENABLE1  0x009c
-#define OMAP1610_GPIO_CLEAR_WAKEUPENA   0x00a8
-#define OMAP1610_GPIO_CLEAR_DATAOUT     0x00b0
-#define OMAP1610_GPIO_SET_IRQENABLE1    0x00dc
-#define OMAP1610_GPIO_SET_WAKEUPENA     0x00e8
-#define OMAP1610_GPIO_SET_DATAOUT       0x00f0
-/*
- * OMAP7XX specific GPIO registers
- */
-#define OMAP7XX_GPIO_DATA_INPUT         0x00
-#define OMAP7XX_GPIO_DATA_OUTPUT        0x04
-#define OMAP7XX_GPIO_DIR_CONTROL        0x08
-#define OMAP7XX_GPIO_INT_CONTROL        0x0c
-#define OMAP7XX_GPIO_INT_MASK           0x10
-#define OMAP7XX_GPIO_INT_STATUS         0x14
-/*
- * omap2+ specific GPIO registers
- */
-#define OMAP24XX_GPIO_REVISION          0x0000
-#define OMAP24XX_GPIO_IRQSTATUS1        0x0018
-#define OMAP24XX_GPIO_IRQSTATUS2        0x0028
-#define OMAP24XX_GPIO_IRQENABLE2        0x002c
-#define OMAP24XX_GPIO_IRQENABLE1        0x001c
-#define OMAP24XX_GPIO_WAKE_EN           0x0020
-#define OMAP24XX_GPIO_CTRL              0x0030
-#define OMAP24XX_GPIO_OE                0x0034
-#define OMAP24XX_GPIO_DATAIN            0x0038
-#define OMAP24XX_GPIO_DATAOUT           0x003c
-#define OMAP24XX_GPIO_LEVELDETECT0      0x0040
-#define OMAP24XX_GPIO_LEVELDETECT1      0x0044
-#define OMAP24XX_GPIO_RISINGDETECT      0x0048
-#define OMAP24XX_GPIO_FALLINGDETECT     0x004c
-#define OMAP24XX_GPIO_DEBOUNCE_EN       0x0050
-#define OMAP24XX_GPIO_DEBOUNCE_VAL      0x0054
-#define OMAP24XX_GPIO_CLEARIRQENABLE1   0x0060
-#define OMAP24XX_GPIO_SETIRQENABLE1     0x0064
-#define OMAP24XX_GPIO_CLEARWKUENA       0x0080
-#define OMAP24XX_GPIO_SETWKUENA         0x0084
-#define OMAP24XX_GPIO_CLEARDATAOUT      0x0090
-#define OMAP24XX_GPIO_SETDATAOUT        0x0094
-#define OMAP4_GPIO_REVISION             0x0000
-#define OMAP4_GPIO_EOI                  0x0020
-#define OMAP4_GPIO_IRQSTATUSRAW0        0x0024
-#define OMAP4_GPIO_IRQSTATUSRAW1        0x0028
-#define OMAP4_GPIO_IRQSTATUS0           0x002c
-#define OMAP4_GPIO_IRQSTATUS1           0x0030
-#define OMAP4_GPIO_IRQSTATUSSET0        0x0034
-#define OMAP4_GPIO_IRQSTATUSSET1        0x0038
-#define OMAP4_GPIO_IRQSTATUSCLR0        0x003c
-#define OMAP4_GPIO_IRQSTATUSCLR1        0x0040
-#define OMAP4_GPIO_IRQWAKEN0            0x0044
-#define OMAP4_GPIO_IRQWAKEN1            0x0048
-#define OMAP4_GPIO_IRQENABLE1           0x011c
-#define OMAP4_GPIO_WAKE_EN              0x0120
-#define OMAP4_GPIO_IRQSTATUS2           0x0128
-#define OMAP4_GPIO_IRQENABLE2           0x012c
-#define OMAP4_GPIO_CTRL                 0x0130
-#define OMAP4_GPIO_OE                   0x0134
-#define OMAP4_GPIO_DATAIN               0x0138
-#define OMAP4_GPIO_DATAOUT              0x013c
-#define OMAP4_GPIO_LEVELDETECT0         0x0140
-#define OMAP4_GPIO_LEVELDETECT1         0x0144
-#define OMAP4_GPIO_RISINGDETECT         0x0148
-#define OMAP4_GPIO_FALLINGDETECT        0x014c
-#define OMAP4_GPIO_DEBOUNCENABLE        0x0150
-#define OMAP4_GPIO_DEBOUNCINGTIME       0x0154
-#define OMAP4_GPIO_CLEARIRQENABLE1      0x0160
-#define OMAP4_GPIO_SETIRQENABLE1        0x0164
-#define OMAP4_GPIO_CLEARWKUENA          0x0180
-#define OMAP4_GPIO_SETWKUENA            0x0184
-#define OMAP4_GPIO_CLEARDATAOUT         0x0190
-#define OMAP4_GPIO_SETDATAOUT           0x0194
-#define OMAP_MPUIO(nr)          (OMAP_MAX_GPIO_LINES + (nr))
-#define OMAP_GPIO_IS_MPUIO(nr)  ((nr) >= OMAP_MAX_GPIO_LINES)
-struct omap_gpio_dev_attr {
-        int bank_width;         /* GPIO bank width */
-        bool dbck_flag;         /* dbck required or not - True for OMAP3&4 */
-};
-struct omap_gpio_reg_offs {
-        u16 revision;
-        u16 direction;
-        u16 datain;
-        u16 dataout;
-        u16 set_dataout;
-        u16 clr_dataout;
-        u16 irqstatus;
-        u16 irqstatus2;
-        u16 irqstatus_raw0;
-        u16 irqstatus_raw1;
-        u16 irqenable;
-        u16 irqenable2;
-        u16 set_irqenable;
-        u16 clr_irqenable;
-        u16 debounce;
-        u16 debounce_en;
-        u16 ctrl;
-        u16 wkup_en;
-        u16 leveldetect0;
-        u16 leveldetect1;
-        u16 risingdetect;
-        u16 fallingdetect;
-        u16 irqctrl;
-        u16 edgectrl1;
-        u16 edgectrl2;
-        u16 pinctrl;
-        bool irqenable_inv;
-};
-struct omap_gpio_platform_data {
-        int bank_type;
-        int bank_width;         /* GPIO bank width */
-        int bank_stride;        /* Only needed for omap1 MPUIO */
-        bool dbck_flag;         /* dbck required or not - True for OMAP3&4 */
-        bool loses_context;     /* whether the bank would ever lose context */
-        bool is_mpuio;          /* whether the bank is of type MPUIO */
-        u32 non_wakeup_gpios;
-        struct omap_gpio_reg_offs *regs;
-        /* Return context loss count due to PM states changing */
-        int (*get_context_loss_count)(struct device *dev);
-};
-extern void omap2_gpio_prepare_for_idle(int off_mode);
-extern void omap2_gpio_resume_after_idle(void);
-extern void omap_set_gpio_debounce(int gpio, int enable);
-extern void omap_set_gpio_debounce_time(int gpio, int enable);
-/*-------------------------------------------------------------------------*/
-/*
- * Wrappers for "new style" GPIO calls, using the new infrastructure
- * which lets us plug in FPGA, I2C, and other implementations.
- *
- * The original OMAP-specific calls should eventually be removed.
- */
-#include <linux/errno.h>
-#include <asm-generic/gpio.h>
-#endif
diff --git a/arch/arm/plat-omap/include/plat/gpmc.h b/arch/arm/plat-omap/include/plat/gpmc.h
index f37764a36072..2e6e2597178c 100644
--- a/arch/arm/plat-omap/include/plat/gpmc.h
+++ b/arch/arm/plat-omap/include/plat/gpmc.h
@@ -133,6 +133,25 @@ struct gpmc_timings {
        u16 wr_data_mux_bus;    /* WRDATAONADMUXBUS */
 };
+struct gpmc_nand_regs {
+        void __iomem    *gpmc_status;
+        void __iomem    *gpmc_nand_command;
+        void __iomem    *gpmc_nand_address;
+        void __iomem    *gpmc_nand_data;
+        void __iomem    *gpmc_prefetch_config1;
+        void __iomem    *gpmc_prefetch_config2;
+        void __iomem    *gpmc_prefetch_control;
+        void __iomem    *gpmc_prefetch_status;
+        void __iomem    *gpmc_ecc_config;
+        void __iomem    *gpmc_ecc_control;
+        void __iomem    *gpmc_ecc_size_config;
+        void __iomem    *gpmc_ecc1_result;
+        void __iomem    *gpmc_bch_result0;
+};
+extern void gpmc_update_nand_reg(struct gpmc_nand_regs *reg, int cs);
+extern int gpmc_get_client_irq(unsigned irq_config);
 extern unsigned int gpmc_ns_to_ticks(unsigned int time_ns);
 extern unsigned int gpmc_ps_to_ticks(unsigned int time_ps);
 extern unsigned int gpmc_ticks_to_ns(unsigned int ticks);
diff --git a/arch/arm/plat-omap/include/plat/hardware.h b/arch/arm/plat-omap/include/plat/hardware.h
deleted file mode 100644
index ddbde38e1e33..000000000000
--- a/arch/arm/plat-omap/include/plat/hardware.h
+++ /dev/null
@@ -1,293 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/hardware.h
- *
- * Hardware definitions for TI OMAP processors and boards
- *
- * NOTE: Please put device driver specific defines into a separate header
- *       file for each driver.
- *
- * Copyright (C) 2001 RidgeRun, Inc.
- * Author: RidgeRun, Inc. Greg Lonnon <glonnon@ridgerun.com>
- *
- * Reorganized for Linux-2.6 by Tony Lindgren <tony@atomide.com>
- *                          and Dirk Behme <dirk.behme@de.bosch.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#ifndef __ASM_ARCH_OMAP_HARDWARE_H
-#define __ASM_ARCH_OMAP_HARDWARE_H
-#include <asm/sizes.h>
-#ifndef __ASSEMBLER__
-#include <asm/types.h>
-#include <plat/cpu.h>
-#endif
-#include <plat/serial.h>
-/*
- * ---------------------------------------------------------------------------
- * Common definitions for all OMAP processors
- * NOTE: Put all processor or board specific parts to the special header
- *       files.
- * ---------------------------------------------------------------------------
- */
-/*
- * ----------------------------------------------------------------------------
- * Timers
- * ----------------------------------------------------------------------------
- */
-#define OMAP_MPU_TIMER1_BASE    (0xfffec500)
-#define OMAP_MPU_TIMER2_BASE    (0xfffec600)
-#define OMAP_MPU_TIMER3_BASE    (0xfffec700)
-#define MPU_TIMER_FREE          (1 << 6)
-#define MPU_TIMER_CLOCK_ENABLE  (1 << 5)
-#define MPU_TIMER_AR            (1 << 1)
-#define MPU_TIMER_ST            (1 << 0)
-/*
- * ----------------------------------------------------------------------------
- * Clocks
- * ----------------------------------------------------------------------------
- */
-#define CLKGEN_REG_BASE         (0xfffece00)
-#define ARM_CKCTL               (CLKGEN_REG_BASE + 0x0)
-#define ARM_IDLECT1             (CLKGEN_REG_BASE + 0x4)
-#define ARM_IDLECT2             (CLKGEN_REG_BASE + 0x8)
-#define ARM_EWUPCT              (CLKGEN_REG_BASE + 0xC)
-#define ARM_RSTCT1              (CLKGEN_REG_BASE + 0x10)
-#define ARM_RSTCT2              (CLKGEN_REG_BASE + 0x14)
-#define ARM_SYSST               (CLKGEN_REG_BASE + 0x18)
-#define ARM_IDLECT3             (CLKGEN_REG_BASE + 0x24)
-#define CK_RATEF                1
-#define CK_IDLEF                2
-#define CK_ENABLEF              4
-#define CK_SELECTF              8
-#define SETARM_IDLE_SHIFT
-/* DPLL control registers */
-#define DPLL_CTL                (0xfffecf00)
-/* DSP clock control. Must use __raw_readw() and __raw_writew() with these */
-#define DSP_CONFIG_REG_BASE     IOMEM(0xe1008000)
-#define DSP_CKCTL               (DSP_CONFIG_REG_BASE + 0x0)
-#define DSP_IDLECT1             (DSP_CONFIG_REG_BASE + 0x4)
-#define DSP_IDLECT2             (DSP_CONFIG_REG_BASE + 0x8)
-#define DSP_RSTCT2              (DSP_CONFIG_REG_BASE + 0x14)
-/*
- * ---------------------------------------------------------------------------
- * UPLD
- * ---------------------------------------------------------------------------
- */
-#define ULPD_REG_BASE           (0xfffe0800)
-#define ULPD_IT_STATUS          (ULPD_REG_BASE + 0x14)
-#define ULPD_SETUP_ANALOG_CELL_3        (ULPD_REG_BASE + 0x24)
-#define ULPD_CLOCK_CTRL         (ULPD_REG_BASE + 0x30)
-#       define DIS_USB_PVCI_CLK         (1 << 5)        /* no USB/FAC synch */
-#       define USB_MCLK_EN              (1 << 4)        /* enable W4_USB_CLKO */
-#define ULPD_SOFT_REQ           (ULPD_REG_BASE + 0x34)
-#       define SOFT_UDC_REQ             (1 << 4)
-#       define SOFT_USB_CLK_REQ         (1 << 3)
-#       define SOFT_DPLL_REQ            (1 << 0)
-#define ULPD_DPLL_CTRL          (ULPD_REG_BASE + 0x3c)
-#define ULPD_STATUS_REQ         (ULPD_REG_BASE + 0x40)
-#define ULPD_APLL_CTRL          (ULPD_REG_BASE + 0x4c)
-#define ULPD_POWER_CTRL         (ULPD_REG_BASE + 0x50)
-#define ULPD_SOFT_DISABLE_REQ_REG       (ULPD_REG_BASE + 0x68)
-#       define DIS_MMC2_DPLL_REQ        (1 << 11)
-#       define DIS_MMC1_DPLL_REQ        (1 << 10)
-#       define DIS_UART3_DPLL_REQ       (1 << 9)
-#       define DIS_UART2_DPLL_REQ       (1 << 8)
-#       define DIS_UART1_DPLL_REQ       (1 << 7)
-#       define DIS_USB_HOST_DPLL_REQ    (1 << 6)
-#define ULPD_SDW_CLK_DIV_CTRL_SEL       (ULPD_REG_BASE + 0x74)
-#define ULPD_CAM_CLK_CTRL       (ULPD_REG_BASE + 0x7c)
-/*
- * ---------------------------------------------------------------------------
- * Watchdog timer
- * ---------------------------------------------------------------------------
- */
-/* Watchdog timer within the OMAP3.2 gigacell */
-#define OMAP_MPU_WATCHDOG_BASE  (0xfffec800)
-#define OMAP_WDT_TIMER          (OMAP_MPU_WATCHDOG_BASE + 0x0)
-#define OMAP_WDT_LOAD_TIM       (OMAP_MPU_WATCHDOG_BASE + 0x4)
-#define OMAP_WDT_READ_TIM       (OMAP_MPU_WATCHDOG_BASE + 0x4)
-#define OMAP_WDT_TIMER_MODE     (OMAP_MPU_WATCHDOG_BASE + 0x8)
-/*
- * ---------------------------------------------------------------------------
- * Interrupts
- * ---------------------------------------------------------------------------
- */
-#ifdef CONFIG_ARCH_OMAP1
-/*
- * XXX: These probably want to be moved to arch/arm/mach-omap/omap1/irq.c
- * or something similar.. -- PFM.
- */
-#define OMAP_IH1_BASE           0xfffecb00
-#define OMAP_IH2_BASE           0xfffe0000
-#define OMAP_IH1_ITR            (OMAP_IH1_BASE + 0x00)
-#define OMAP_IH1_MIR            (OMAP_IH1_BASE + 0x04)
-#define OMAP_IH1_SIR_IRQ        (OMAP_IH1_BASE + 0x10)
-#define OMAP_IH1_SIR_FIQ        (OMAP_IH1_BASE + 0x14)
-#define OMAP_IH1_CONTROL        (OMAP_IH1_BASE + 0x18)
-#define OMAP_IH1_ILR0           (OMAP_IH1_BASE + 0x1c)
-#define OMAP_IH1_ISR            (OMAP_IH1_BASE + 0x9c)
-#define OMAP_IH2_ITR            (OMAP_IH2_BASE + 0x00)
-#define OMAP_IH2_MIR            (OMAP_IH2_BASE + 0x04)
-#define OMAP_IH2_SIR_IRQ        (OMAP_IH2_BASE + 0x10)
-#define OMAP_IH2_SIR_FIQ        (OMAP_IH2_BASE + 0x14)
-#define OMAP_IH2_CONTROL        (OMAP_IH2_BASE + 0x18)
-#define OMAP_IH2_ILR0           (OMAP_IH2_BASE + 0x1c)
-#define OMAP_IH2_ISR            (OMAP_IH2_BASE + 0x9c)
-#define IRQ_ITR_REG_OFFSET      0x00
-#define IRQ_MIR_REG_OFFSET      0x04
-#define IRQ_SIR_IRQ_REG_OFFSET  0x10
-#define IRQ_SIR_FIQ_REG_OFFSET  0x14
-#define IRQ_CONTROL_REG_OFFSET  0x18
-#define IRQ_ISR_REG_OFFSET      0x9c
-#define IRQ_ILR0_REG_OFFSET     0x1c
-#define IRQ_GMR_REG_OFFSET      0xa0
-#endif
-/*
- * ----------------------------------------------------------------------------
- * System control registers
- * ----------------------------------------------------------------------------
- */
-#define MOD_CONF_CTRL_0         0xfffe1080
-#define MOD_CONF_CTRL_1         0xfffe1110
-/*
- * ----------------------------------------------------------------------------
- * Pin multiplexing registers
- * ----------------------------------------------------------------------------
- */
-#define FUNC_MUX_CTRL_0         0xfffe1000
-#define FUNC_MUX_CTRL_1         0xfffe1004
-#define FUNC_MUX_CTRL_2         0xfffe1008
-#define COMP_MODE_CTRL_0        0xfffe100c
-#define FUNC_MUX_CTRL_3         0xfffe1010
-#define FUNC_MUX_CTRL_4         0xfffe1014
-#define FUNC_MUX_CTRL_5         0xfffe1018
-#define FUNC_MUX_CTRL_6         0xfffe101C
-#define FUNC_MUX_CTRL_7         0xfffe1020
-#define FUNC_MUX_CTRL_8         0xfffe1024
-#define FUNC_MUX_CTRL_9         0xfffe1028
-#define FUNC_MUX_CTRL_A         0xfffe102C
-#define FUNC_MUX_CTRL_B         0xfffe1030
-#define FUNC_MUX_CTRL_C         0xfffe1034
-#define FUNC_MUX_CTRL_D         0xfffe1038
-#define PULL_DWN_CTRL_0         0xfffe1040
-#define PULL_DWN_CTRL_1         0xfffe1044
-#define PULL_DWN_CTRL_2         0xfffe1048
-#define PULL_DWN_CTRL_3         0xfffe104c
-#define PULL_DWN_CTRL_4         0xfffe10ac
-/* OMAP-1610 specific multiplexing registers */
-#define FUNC_MUX_CTRL_E         0xfffe1090
-#define FUNC_MUX_CTRL_F         0xfffe1094
-#define FUNC_MUX_CTRL_10        0xfffe1098
-#define FUNC_MUX_CTRL_11        0xfffe109c
-#define FUNC_MUX_CTRL_12        0xfffe10a0
-#define PU_PD_SEL_0             0xfffe10b4
-#define PU_PD_SEL_1             0xfffe10b8
-#define PU_PD_SEL_2             0xfffe10bc
-#define PU_PD_SEL_3             0xfffe10c0
-#define PU_PD_SEL_4             0xfffe10c4
-/* Timer32K for 1610 and 1710*/
-#define OMAP_TIMER32K_BASE      0xFFFBC400
-/*
- * ---------------------------------------------------------------------------
- * TIPB bus interface
- * ---------------------------------------------------------------------------
- */
-#define TIPB_PUBLIC_CNTL_BASE           0xfffed300
-#define MPU_PUBLIC_TIPB_CNTL            (TIPB_PUBLIC_CNTL_BASE + 0x8)
-#define TIPB_PRIVATE_CNTL_BASE          0xfffeca00
-#define MPU_PRIVATE_TIPB_CNTL           (TIPB_PRIVATE_CNTL_BASE + 0x8)
-/*
- * ----------------------------------------------------------------------------
- * MPUI interface
- * ----------------------------------------------------------------------------
- */
-#define MPUI_BASE                       (0xfffec900)
-#define MPUI_CTRL                       (MPUI_BASE + 0x0)
-#define MPUI_DEBUG_ADDR                 (MPUI_BASE + 0x4)
-#define MPUI_DEBUG_DATA                 (MPUI_BASE + 0x8)
-#define MPUI_DEBUG_FLAG                 (MPUI_BASE + 0xc)
-#define MPUI_STATUS_REG                 (MPUI_BASE + 0x10)
-#define MPUI_DSP_STATUS                 (MPUI_BASE + 0x14)
-#define MPUI_DSP_BOOT_CONFIG            (MPUI_BASE + 0x18)
-#define MPUI_DSP_API_CONFIG             (MPUI_BASE + 0x1c)
-/*
- * ----------------------------------------------------------------------------
- * LED Pulse Generator
- * ----------------------------------------------------------------------------
- */
-#define OMAP_LPG1_BASE                  0xfffbd000
-#define OMAP_LPG2_BASE                  0xfffbd800
-#define OMAP_LPG1_LCR                   (OMAP_LPG1_BASE + 0x00)
-#define OMAP_LPG1_PMR                   (OMAP_LPG1_BASE + 0x04)
-#define OMAP_LPG2_LCR                   (OMAP_LPG2_BASE + 0x00)
-#define OMAP_LPG2_PMR                   (OMAP_LPG2_BASE + 0x04)
-/*
- * ----------------------------------------------------------------------------
- * Pulse-Width Light
- * ----------------------------------------------------------------------------
- */
-#define OMAP_PWL_BASE                   0xfffb5800
-#define OMAP_PWL_ENABLE                 (OMAP_PWL_BASE + 0x00)
-#define OMAP_PWL_CLK_ENABLE             (OMAP_PWL_BASE + 0x04)
-/*
- * ---------------------------------------------------------------------------
- * Processor specific defines
- * ---------------------------------------------------------------------------
- */
-#include <plat/omap7xx.h>
-#include <plat/omap1510.h>
-#include <plat/omap16xx.h>
-#include <plat/omap24xx.h>
-#include <plat/omap34xx.h>
-#include <plat/omap44xx.h>
-#include <plat/ti81xx.h>
-#include <plat/am33xx.h>
-#include <plat/omap54xx.h>
-#endif  /* __ASM_ARCH_OMAP_HARDWARE_H */
diff --git a/arch/arm/plat-omap/include/plat/irqs-44xx.h b/arch/arm/plat-omap/include/plat/irqs-44xx.h
deleted file mode 100644
index 518322c80116..000000000000
--- a/arch/arm/plat-omap/include/plat/irqs-44xx.h
+++ /dev/null
@@ -1,144 +0,0 @@
-/*
- * OMAP4 Interrupt lines definitions
- *
- * Copyright (C) 2009-2010 Texas Instruments, Inc.
- *
- * Santosh Shilimkar (santosh.shilimkar@ti.com)
- * Benoit Cousson (b-cousson@ti.com)
- *
- * This file is automatically generated from the OMAP hardware databases.
- * We respectfully ask that any modifications to this file be coordinated
- * with the public linux-omap@vger.kernel.org mailing list and the
- * authors above to ensure that the autogeneration scripts are kept
- * up-to-date with the file contents.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ARCH_ARM_MACH_OMAP2_OMAP44XX_IRQS_H
-#define __ARCH_ARM_MACH_OMAP2_OMAP44XX_IRQS_H
-/* OMAP44XX IRQs numbers definitions */
-#define OMAP44XX_IRQ_LOCALTIMER                 29
-#define OMAP44XX_IRQ_LOCALWDT                   30
-#define OMAP44XX_IRQ_GIC_START                  32
-#define OMAP44XX_IRQ_PL310                      (0 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_CTI0                       (1 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_CTI1                       (2 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_ELM                        (4 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_SYS_1N                     (7 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_SECURITY_EVENTS            (8 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_L3_DBG                     (9 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_L3_APP                     (10 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_PRCM                       (11 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_SDMA_0                     (12 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_SDMA_1                     (13 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_SDMA_2                     (14 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_SDMA_3                     (15 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_MCBSP4                     (16 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_MCBSP1                     (17 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_SR_MCU                     (18 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_SR_CORE                    (19 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_GPMC                       (20 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_GFX                        (21 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_MCBSP2                     (22 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_MCBSP3                     (23 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_ISS_5                      (24 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_DSS_DISPC                  (25 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_MAIL_U0                    (26 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_C2C_SSCM_0                 (27 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_TESLA_MMU                  (28 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_GPIO1                      (29 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_GPIO2                      (30 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_GPIO3                      (31 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_GPIO4                      (32 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_GPIO5                      (33 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_GPIO6                      (34 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_USIM                       (35 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_WDT3                       (36 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_GPT1                       (37 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_GPT2                       (38 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_GPT3                       (39 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_GPT4                       (40 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_GPT5                       (41 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_GPT6                       (42 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_GPT7                       (43 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_GPT8                       (44 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_GPT9                       (45 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_GPT10                      (46 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_GPT11                      (47 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_SPI4                       (48 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_SHA1_S                     (49 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_FPKA_SINTREQUEST_S         (50 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_SHA1_P                     (51 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_RNG                        (52 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_DSS_DSI1                   (53 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_I2C1                       (56 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_I2C2                       (57 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_HDQ                        (58 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_MMC5                       (59 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_I2C3                       (61 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_I2C4                       (62 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_AES2_S                     (63 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_AES2_P                     (64 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_SPI1                       (65 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_SPI2                       (66 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_HSI_P1                     (67 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_HSI_P2                     (68 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_FDIF_3                     (69 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_UART4                      (70 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_HSI_DMA                    (71 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_UART1                      (72 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_UART2                      (73 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_UART3                      (74 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_PBIAS                      (75 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_OHCI                       (76 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_EHCI                       (77 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_TLL                        (78 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_AES1_S                     (79 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_WDT2                       (80 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_DES_S                      (81 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_DES_P                      (82 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_MMC1                       (83 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_DSS_DSI2                   (84 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_AES1_P                     (85 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_MMC2                       (86 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_MPU_ICR                    (87 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_C2C_SSCM_1                 (88 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_FSUSB                      (89 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_FSUSB_SMI                  (90 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_SPI3                       (91 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_HS_USB_MC_N                (92 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_HS_USB_DMA_N               (93 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_MMC3                       (94 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_GPT12                      (95 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_MMC4                       (96 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_SLIMBUS1                   (97 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_SLIMBUS2                   (98 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_ABE                        (99 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_DUCATI_MMU                 (100 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_DSS_HDMI                   (101 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_SR_IVA                     (102 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_IVA_HD_POSYNCITRPEND_1     (103 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_IVA_HD_POSYNCITRPEND_0     (104 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_IVA_HD_POMBINTRPEND_0      (107 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_MCASP1_AR                  (108 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_MCASP1_AX                  (109 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_EMIF4_1                    (110 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_EMIF4_2                    (111 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_MCPDM                      (112 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_DMM                        (113 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_DMIC                       (114 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_CDMA_0                     (115 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_CDMA_1                     (116 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_CDMA_2                     (117 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_CDMA_3                     (118 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_SYS_2N                     (119 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_KBD_CTL                    (120 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_UNIPRO1                    (124 + OMAP44XX_IRQ_GIC_START)
-#endif
diff --git a/arch/arm/plat-omap/include/plat/irqs.h b/arch/arm/plat-omap/include/plat/irqs.h
deleted file mode 100644
index 37bbbbb981b2..000000000000
--- a/arch/arm/plat-omap/include/plat/irqs.h
+++ /dev/null
@@ -1,453 +0,0 @@
-/*
- *  arch/arm/plat-omap/include/mach/irqs.h
- *
- *  Copyright (C) Greg Lonnon 2001
- *  Updated for OMAP-1610 by Tony Lindgren <tony@atomide.com>
- *
- * Copyright (C) 2009 Texas Instruments
- * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- * NOTE: The interrupt vectors for the OMAP-1509, OMAP-1510, and OMAP-1610
- *       are different.
- */
-#ifndef __ASM_ARCH_OMAP15XX_IRQS_H
-#define __ASM_ARCH_OMAP15XX_IRQS_H
-/* All OMAP4 specific defines are moved to irqs-44xx.h */
-#include "irqs-44xx.h"
-/*
- * IRQ numbers for interrupt handler 1
- *
- * NOTE: See also the OMAP-1510 and 1610 specific IRQ numbers below
- *
- */
-#define INT_CAMERA              1
-#define INT_FIQ                 3
-#define INT_RTDX                6
-#define INT_DSP_MMU_ABORT       7
-#define INT_HOST                8
-#define INT_ABORT               9
-#define INT_BRIDGE_PRIV         13
-#define INT_GPIO_BANK1          14
-#define INT_UART3               15
-#define INT_TIMER3              16
-#define INT_DMA_CH0_6           19
-#define INT_DMA_CH1_7           20
-#define INT_DMA_CH2_8           21
-#define INT_DMA_CH3             22
-#define INT_DMA_CH4             23
-#define INT_DMA_CH5             24
-#define INT_DMA_LCD             25
-#define INT_TIMER1              26
-#define INT_WD_TIMER            27
-#define INT_BRIDGE_PUB          28
-#define INT_TIMER2              30
-#define INT_LCD_CTRL            31
-/*
- * OMAP-1510 specific IRQ numbers for interrupt handler 1
- */
-#define INT_1510_IH2_IRQ        0
-#define INT_1510_RES2           2
-#define INT_1510_SPI_TX         4
-#define INT_1510_SPI_RX         5
-#define INT_1510_DSP_MAILBOX1   10
-#define INT_1510_DSP_MAILBOX2   11
-#define INT_1510_RES12          12
-#define INT_1510_LB_MMU         17
-#define INT_1510_RES18          18
-#define INT_1510_LOCAL_BUS      29
-/*
- * OMAP-1610 specific IRQ numbers for interrupt handler 1
- */
-#define INT_1610_IH2_IRQ        INT_1510_IH2_IRQ
-#define INT_1610_IH2_FIQ        2
-#define INT_1610_McBSP2_TX      4
-#define INT_1610_McBSP2_RX      5
-#define INT_1610_DSP_MAILBOX1   10
-#define INT_1610_DSP_MAILBOX2   11
-#define INT_1610_LCD_LINE       12
-#define INT_1610_GPTIMER1       17
-#define INT_1610_GPTIMER2       18
-#define INT_1610_SSR_FIFO_0     29
-/*
- * OMAP-7xx specific IRQ numbers for interrupt handler 1
- */
-#define INT_7XX_IH2_FIQ         0
-#define INT_7XX_IH2_IRQ         1
-#define INT_7XX_USB_NON_ISO     2
-#define INT_7XX_USB_ISO         3
-#define INT_7XX_ICR             4
-#define INT_7XX_EAC             5
-#define INT_7XX_GPIO_BANK1      6
-#define INT_7XX_GPIO_BANK2      7
-#define INT_7XX_GPIO_BANK3      8
-#define INT_7XX_McBSP2TX        10
-#define INT_7XX_McBSP2RX        11
-#define INT_7XX_McBSP2RX_OVF    12
-#define INT_7XX_LCD_LINE        14
-#define INT_7XX_GSM_PROTECT     15
-#define INT_7XX_TIMER3          16
-#define INT_7XX_GPIO_BANK5      17
-#define INT_7XX_GPIO_BANK6      18
-#define INT_7XX_SPGIO_WR        29
-/*
- * IRQ numbers for interrupt handler 2
- *
- * NOTE: See also the OMAP-1510 and 1610 specific IRQ numbers below
- */
-#define IH2_BASE                32
-#define INT_KEYBOARD            (1 + IH2_BASE)
-#define INT_uWireTX             (2 + IH2_BASE)
-#define INT_uWireRX             (3 + IH2_BASE)
-#define INT_I2C                 (4 + IH2_BASE)
-#define INT_MPUIO               (5 + IH2_BASE)
-#define INT_USB_HHC_1           (6 + IH2_BASE)
-#define INT_McBSP3TX            (10 + IH2_BASE)
-#define INT_McBSP3RX            (11 + IH2_BASE)
-#define INT_McBSP1TX            (12 + IH2_BASE)
-#define INT_McBSP1RX            (13 + IH2_BASE)
-#define INT_UART1               (14 + IH2_BASE)
-#define INT_UART2               (15 + IH2_BASE)
-#define INT_BT_MCSI1TX          (16 + IH2_BASE)
-#define INT_BT_MCSI1RX          (17 + IH2_BASE)
-#define INT_SOSSI_MATCH         (19 + IH2_BASE)
-#define INT_USB_W2FC            (20 + IH2_BASE)
-#define INT_1WIRE               (21 + IH2_BASE)
-#define INT_OS_TIMER            (22 + IH2_BASE)
-#define INT_MMC                 (23 + IH2_BASE)
-#define INT_GAUGE_32K           (24 + IH2_BASE)
-#define INT_RTC_TIMER           (25 + IH2_BASE)
-#define INT_RTC_ALARM           (26 + IH2_BASE)
-#define INT_MEM_STICK           (27 + IH2_BASE)
-/*
- * OMAP-1510 specific IRQ numbers for interrupt handler 2
- */
-#define INT_1510_DSP_MMU        (28 + IH2_BASE)
-#define INT_1510_COM_SPI_RO     (31 + IH2_BASE)
-/*
- * OMAP-1610 specific IRQ numbers for interrupt handler 2
- */
-#define INT_1610_FAC            (0 + IH2_BASE)
-#define INT_1610_USB_HHC_2      (7 + IH2_BASE)
-#define INT_1610_USB_OTG        (8 + IH2_BASE)
-#define INT_1610_SoSSI          (9 + IH2_BASE)
-#define INT_1610_SoSSI_MATCH    (19 + IH2_BASE)
-#define INT_1610_DSP_MMU        (28 + IH2_BASE)
-#define INT_1610_McBSP2RX_OF    (31 + IH2_BASE)
-#define INT_1610_STI            (32 + IH2_BASE)
-#define INT_1610_STI_WAKEUP     (33 + IH2_BASE)
-#define INT_1610_GPTIMER3       (34 + IH2_BASE)
-#define INT_1610_GPTIMER4       (35 + IH2_BASE)
-#define INT_1610_GPTIMER5       (36 + IH2_BASE)
-#define INT_1610_GPTIMER6       (37 + IH2_BASE)
-#define INT_1610_GPTIMER7       (38 + IH2_BASE)
-#define INT_1610_GPTIMER8       (39 + IH2_BASE)
-#define INT_1610_GPIO_BANK2     (40 + IH2_BASE)
-#define INT_1610_GPIO_BANK3     (41 + IH2_BASE)
-#define INT_1610_MMC2           (42 + IH2_BASE)
-#define INT_1610_CF             (43 + IH2_BASE)
-#define INT_1610_WAKE_UP_REQ    (46 + IH2_BASE)
-#define INT_1610_GPIO_BANK4     (48 + IH2_BASE)
-#define INT_1610_SPI            (49 + IH2_BASE)
-#define INT_1610_DMA_CH6        (53 + IH2_BASE)
-#define INT_1610_DMA_CH7        (54 + IH2_BASE)
-#define INT_1610_DMA_CH8        (55 + IH2_BASE)
-#define INT_1610_DMA_CH9        (56 + IH2_BASE)
-#define INT_1610_DMA_CH10       (57 + IH2_BASE)
-#define INT_1610_DMA_CH11       (58 + IH2_BASE)
-#define INT_1610_DMA_CH12       (59 + IH2_BASE)
-#define INT_1610_DMA_CH13       (60 + IH2_BASE)
-#define INT_1610_DMA_CH14       (61 + IH2_BASE)
-#define INT_1610_DMA_CH15       (62 + IH2_BASE)
-#define INT_1610_NAND           (63 + IH2_BASE)
-#define INT_1610_SHA1MD5        (91 + IH2_BASE)
-/*
- * OMAP-7xx specific IRQ numbers for interrupt handler 2
- */
-#define INT_7XX_HW_ERRORS       (0 + IH2_BASE)
-#define INT_7XX_NFIQ_PWR_FAIL   (1 + IH2_BASE)
-#define INT_7XX_CFCD            (2 + IH2_BASE)
-#define INT_7XX_CFIREQ          (3 + IH2_BASE)
-#define INT_7XX_I2C             (4 + IH2_BASE)
-#define INT_7XX_PCC             (5 + IH2_BASE)
-#define INT_7XX_MPU_EXT_NIRQ    (6 + IH2_BASE)
-#define INT_7XX_SPI_100K_1      (7 + IH2_BASE)
-#define INT_7XX_SYREN_SPI       (8 + IH2_BASE)
-#define INT_7XX_VLYNQ           (9 + IH2_BASE)
-#define INT_7XX_GPIO_BANK4      (10 + IH2_BASE)
-#define INT_7XX_McBSP1TX        (11 + IH2_BASE)
-#define INT_7XX_McBSP1RX        (12 + IH2_BASE)
-#define INT_7XX_McBSP1RX_OF     (13 + IH2_BASE)
-#define INT_7XX_UART_MODEM_IRDA_2 (14 + IH2_BASE)
-#define INT_7XX_UART_MODEM_1    (15 + IH2_BASE)
-#define INT_7XX_MCSI            (16 + IH2_BASE)
-#define INT_7XX_uWireTX         (17 + IH2_BASE)
-#define INT_7XX_uWireRX         (18 + IH2_BASE)
-#define INT_7XX_SMC_CD          (19 + IH2_BASE)
-#define INT_7XX_SMC_IREQ        (20 + IH2_BASE)
-#define INT_7XX_HDQ_1WIRE       (21 + IH2_BASE)
-#define INT_7XX_TIMER32K        (22 + IH2_BASE)
-#define INT_7XX_MMC_SDIO        (23 + IH2_BASE)
-#define INT_7XX_UPLD            (24 + IH2_BASE)
-#define INT_7XX_USB_HHC_1       (27 + IH2_BASE)
-#define INT_7XX_USB_HHC_2       (28 + IH2_BASE)
-#define INT_7XX_USB_GENI        (29 + IH2_BASE)
-#define INT_7XX_USB_OTG         (30 + IH2_BASE)
-#define INT_7XX_CAMERA_IF       (31 + IH2_BASE)
-#define INT_7XX_RNG             (32 + IH2_BASE)
-#define INT_7XX_DUAL_MODE_TIMER (33 + IH2_BASE)
-#define INT_7XX_DBB_RF_EN       (34 + IH2_BASE)
-#define INT_7XX_MPUIO_KEYPAD    (35 + IH2_BASE)
-#define INT_7XX_SHA1_MD5        (36 + IH2_BASE)
-#define INT_7XX_SPI_100K_2      (37 + IH2_BASE)
-#define INT_7XX_RNG_IDLE        (38 + IH2_BASE)
-#define INT_7XX_MPUIO           (39 + IH2_BASE)
-#define INT_7XX_LLPC_LCD_CTRL_CAN_BE_OFF        (40 + IH2_BASE)
-#define INT_7XX_LLPC_OE_FALLING (41 + IH2_BASE)
-#define INT_7XX_LLPC_OE_RISING  (42 + IH2_BASE)
-#define INT_7XX_LLPC_VSYNC      (43 + IH2_BASE)
-#define INT_7XX_WAKE_UP_REQ     (46 + IH2_BASE)
-#define INT_7XX_DMA_CH6         (53 + IH2_BASE)
-#define INT_7XX_DMA_CH7         (54 + IH2_BASE)
-#define INT_7XX_DMA_CH8         (55 + IH2_BASE)
-#define INT_7XX_DMA_CH9         (56 + IH2_BASE)
-#define INT_7XX_DMA_CH10        (57 + IH2_BASE)
-#define INT_7XX_DMA_CH11        (58 + IH2_BASE)
-#define INT_7XX_DMA_CH12        (59 + IH2_BASE)
-#define INT_7XX_DMA_CH13        (60 + IH2_BASE)
-#define INT_7XX_DMA_CH14        (61 + IH2_BASE)
-#define INT_7XX_DMA_CH15        (62 + IH2_BASE)
-#define INT_7XX_NAND            (63 + IH2_BASE)
-#define INT_24XX_SYS_NIRQ       7
-#define INT_24XX_SDMA_IRQ0      12
-#define INT_24XX_SDMA_IRQ1      13
-#define INT_24XX_SDMA_IRQ2      14
-#define INT_24XX_SDMA_IRQ3      15
-#define INT_24XX_CAM_IRQ        24
-#define INT_24XX_DSS_IRQ        25
-#define INT_24XX_MAIL_U0_MPU    26
-#define INT_24XX_DSP_UMA        27
-#define INT_24XX_DSP_MMU        28
-#define INT_24XX_GPIO_BANK1     29
-#define INT_24XX_GPIO_BANK2     30
-#define INT_24XX_GPIO_BANK3     31
-#define INT_24XX_GPIO_BANK4     32
-#define INT_24XX_GPIO_BANK5     33
-#define INT_24XX_MAIL_U3_MPU    34
-#define INT_24XX_GPTIMER1       37
-#define INT_24XX_GPTIMER2       38
-#define INT_24XX_GPTIMER3       39
-#define INT_24XX_GPTIMER4       40
-#define INT_24XX_GPTIMER5       41
-#define INT_24XX_GPTIMER6       42
-#define INT_24XX_GPTIMER7       43
-#define INT_24XX_GPTIMER8       44
-#define INT_24XX_GPTIMER9       45
-#define INT_24XX_GPTIMER10      46
-#define INT_24XX_GPTIMER11      47
-#define INT_24XX_GPTIMER12      48
-#define INT_24XX_SHA1MD5        51
-#define INT_24XX_MCBSP4_IRQ_TX  54
-#define INT_24XX_MCBSP4_IRQ_RX  55
-#define INT_24XX_I2C1_IRQ       56
-#define INT_24XX_I2C2_IRQ       57
-#define INT_24XX_HDQ_IRQ        58
-#define INT_24XX_MCBSP1_IRQ_TX  59
-#define INT_24XX_MCBSP1_IRQ_RX  60
-#define INT_24XX_MCBSP2_IRQ_TX  62
-#define INT_24XX_MCBSP2_IRQ_RX  63
-#define INT_24XX_SPI1_IRQ       65
-#define INT_24XX_SPI2_IRQ       66
-#define INT_24XX_UART1_IRQ      72
-#define INT_24XX_UART2_IRQ      73
-#define INT_24XX_UART3_IRQ      74
-#define INT_24XX_USB_IRQ_GEN    75
-#define INT_24XX_USB_IRQ_NISO   76
-#define INT_24XX_USB_IRQ_ISO    77
-#define INT_24XX_USB_IRQ_HGEN   78
-#define INT_24XX_USB_IRQ_HSOF   79
-#define INT_24XX_USB_IRQ_OTG    80
-#define INT_24XX_MCBSP5_IRQ_TX  81
-#define INT_24XX_MCBSP5_IRQ_RX  82
-#define INT_24XX_MMC_IRQ        83
-#define INT_24XX_MMC2_IRQ       86
-#define INT_24XX_MCBSP3_IRQ_TX  89
-#define INT_24XX_MCBSP3_IRQ_RX  90
-#define INT_24XX_SPI3_IRQ       91
-#define INT_243X_MCBSP2_IRQ     16
-#define INT_243X_MCBSP3_IRQ     17
-#define INT_243X_MCBSP4_IRQ     18
-#define INT_243X_MCBSP5_IRQ     19
-#define INT_243X_MCBSP1_IRQ     64
-#define INT_243X_HS_USB_MC      92
-#define INT_243X_HS_USB_DMA     93
-#define INT_243X_CARKIT_IRQ     94
-#define INT_34XX_BENCH_MPU_EMUL 3
-#define INT_34XX_ST_MCBSP2_IRQ  4
-#define INT_34XX_ST_MCBSP3_IRQ  5
-#define INT_34XX_SSM_ABORT_IRQ  6
-#define INT_34XX_SYS_NIRQ       7
-#define INT_34XX_D2D_FW_IRQ     8
-#define INT_34XX_L3_DBG_IRQ     9
-#define INT_34XX_L3_APP_IRQ     10
-#define INT_34XX_PRCM_MPU_IRQ   11
-#define INT_34XX_MCBSP1_IRQ     16
-#define INT_34XX_MCBSP2_IRQ     17
-#define INT_34XX_GPMC_IRQ       20
-#define INT_34XX_MCBSP3_IRQ     22
-#define INT_34XX_MCBSP4_IRQ     23
-#define INT_34XX_CAM_IRQ        24
-#define INT_34XX_MCBSP5_IRQ     27
-#define INT_34XX_GPIO_BANK1     29
-#define INT_34XX_GPIO_BANK2     30
-#define INT_34XX_GPIO_BANK3     31
-#define INT_34XX_GPIO_BANK4     32
-#define INT_34XX_GPIO_BANK5     33
-#define INT_34XX_GPIO_BANK6     34
-#define INT_34XX_USIM_IRQ       35
-#define INT_34XX_WDT3_IRQ       36
-#define INT_34XX_SPI4_IRQ       48
-#define INT_34XX_SHA1MD52_IRQ   49
-#define INT_34XX_FPKA_READY_IRQ 50
-#define INT_34XX_SHA1MD51_IRQ   51
-#define INT_34XX_RNG_IRQ        52
-#define INT_34XX_I2C3_IRQ       61
-#define INT_34XX_FPKA_ERROR_IRQ 64
-#define INT_34XX_PBIAS_IRQ      75
-#define INT_34XX_OHCI_IRQ       76
-#define INT_34XX_EHCI_IRQ       77
-#define INT_34XX_TLL_IRQ        78
-#define INT_34XX_PARTHASH_IRQ   79
-#define INT_34XX_MMC3_IRQ       94
-#define INT_34XX_GPT12_IRQ      95
-#define INT_36XX_UART4_IRQ      80
-#define INT_35XX_HECC0_IRQ              24
-#define INT_35XX_HECC1_IRQ              28
-#define INT_35XX_EMAC_C0_RXTHRESH_IRQ   67
-#define INT_35XX_EMAC_C0_RX_PULSE_IRQ   68
-#define INT_35XX_EMAC_C0_TX_PULSE_IRQ   69
-#define INT_35XX_EMAC_C0_MISC_PULSE_IRQ 70
-#define INT_35XX_USBOTG_IRQ             71
-#define INT_35XX_UART4_IRQ              84
-#define INT_35XX_CCDC_VD0_IRQ           88
-#define INT_35XX_CCDC_VD1_IRQ           92
-#define INT_35XX_CCDC_VD2_IRQ           93
-/* Max. 128 level 2 IRQs (OMAP1610), 192 GPIOs (OMAP730/850) and
- * 16 MPUIO lines */
-#define OMAP_MAX_GPIO_LINES     192
-#define IH_GPIO_BASE            (128 + IH2_BASE)
-#define IH_MPUIO_BASE           (OMAP_MAX_GPIO_LINES + IH_GPIO_BASE)
-#define OMAP_IRQ_END            (IH_MPUIO_BASE + 16)
-/* External FPGA handles interrupts on Innovator boards */
-#define OMAP_FPGA_IRQ_BASE      (OMAP_IRQ_END)
-#ifdef  CONFIG_MACH_OMAP_INNOVATOR
-#define OMAP_FPGA_NR_IRQS       24
-#else
-#define OMAP_FPGA_NR_IRQS       0
-#endif
-#define OMAP_FPGA_IRQ_END       (OMAP_FPGA_IRQ_BASE + OMAP_FPGA_NR_IRQS)
-/* External TWL4030 can handle interrupts on 2430 and 34xx boards */
-#define TWL4030_IRQ_BASE        (OMAP_FPGA_IRQ_END)
-#ifdef  CONFIG_TWL4030_CORE
-#define TWL4030_BASE_NR_IRQS    8
-#define TWL4030_PWR_NR_IRQS     8
-#else
-#define TWL4030_BASE_NR_IRQS    0
-#define TWL4030_PWR_NR_IRQS     0
-#endif
-#define TWL4030_IRQ_END         (TWL4030_IRQ_BASE + TWL4030_BASE_NR_IRQS)
-#define TWL4030_PWR_IRQ_BASE    TWL4030_IRQ_END
-#define TWL4030_PWR_IRQ_END     (TWL4030_PWR_IRQ_BASE + TWL4030_PWR_NR_IRQS)
-/* External TWL4030 gpio interrupts are optional */
-#define TWL4030_GPIO_IRQ_BASE   TWL4030_PWR_IRQ_END
-#ifdef  CONFIG_GPIO_TWL4030
-#define TWL4030_GPIO_NR_IRQS    18
-#else
-#define TWL4030_GPIO_NR_IRQS    0
-#endif
-#define TWL4030_GPIO_IRQ_END    (TWL4030_GPIO_IRQ_BASE + TWL4030_GPIO_NR_IRQS)
-#define TWL6030_IRQ_BASE        (OMAP_FPGA_IRQ_END)
-#ifdef CONFIG_TWL4030_CORE
-#define TWL6030_BASE_NR_IRQS    20
-#else
-#define TWL6030_BASE_NR_IRQS    0
-#endif
-#define TWL6030_IRQ_END         (TWL6030_IRQ_BASE + TWL6030_BASE_NR_IRQS)
-#define TWL6040_CODEC_IRQ_BASE  TWL6030_IRQ_END
-#ifdef CONFIG_TWL6040_CODEC
-#define TWL6040_CODEC_NR_IRQS   6
-#else
-#define TWL6040_CODEC_NR_IRQS   0
-#endif
-#define TWL6040_CODEC_IRQ_END   (TWL6040_CODEC_IRQ_BASE + TWL6040_CODEC_NR_IRQS)
-/* Total number of interrupts depends on the enabled blocks above */
-#if (TWL4030_GPIO_IRQ_END > TWL6040_CODEC_IRQ_END)
-#define TWL_IRQ_END             TWL4030_GPIO_IRQ_END
-#else
-#define TWL_IRQ_END             TWL6040_CODEC_IRQ_END
-#endif
-/* GPMC related */
-#define OMAP_GPMC_IRQ_BASE      (TWL_IRQ_END)
-#define OMAP_GPMC_NR_IRQS       8
-#define OMAP_GPMC_IRQ_END       (OMAP_GPMC_IRQ_BASE + OMAP_GPMC_NR_IRQS)
-/* PRCM IRQ handler */
-#ifdef CONFIG_ARCH_OMAP2PLUS
-#define OMAP_PRCM_IRQ_BASE      (OMAP_GPMC_IRQ_END)
-#define OMAP_PRCM_NR_IRQS       64
-#define OMAP_PRCM_IRQ_END       (OMAP_PRCM_IRQ_BASE + OMAP_PRCM_NR_IRQS)
-#else
-#define OMAP_PRCM_IRQ_END       OMAP_GPMC_IRQ_END
-#endif
-#define NR_IRQS                 OMAP_PRCM_IRQ_END
-#define OMAP_IRQ_BIT(irq)       (1 << ((irq) % 32))
-#define INTCPS_NR_MIR_REGS      3
-#define INTCPS_NR_IRQS          96
-#include <mach/hardware.h>
-#ifdef CONFIG_FIQ
-#define FIQ_START               1024
-#endif
-#endif
diff --git a/arch/arm/plat-omap/include/plat/mmc.h b/arch/arm/plat-omap/include/plat/mmc.h
index eb3e4d555343..8b4e4f2da2f5 100644
--- a/arch/arm/plat-omap/include/plat/mmc.h
+++ b/arch/arm/plat-omap/include/plat/mmc.h
@@ -15,7 +15,6 @@
 #include <linux/device.h>
 #include <linux/mmc/host.h>
-#include <plat/board.h>
 #include <plat/omap_hwmod.h>
 #define OMAP15XX_NR_MMC         1
diff --git a/arch/arm/plat-omap/include/plat/multi.h b/arch/arm/plat-omap/include/plat/multi.h
index 045e320f1067..324d31b14852 100644
--- a/arch/arm/plat-omap/include/plat/multi.h
+++ b/arch/arm/plat-omap/include/plat/multi.h
@@ -108,4 +108,13 @@
 # endif
 #endif
+#ifdef CONFIG_SOC_AM33XX
+# ifdef OMAP_NAME
+#  undef  MULTI_OMAP2
+#  define MULTI_OMAP2
+# else
+#  define OMAP_NAME am33xx
+# endif
+#endif
 #endif  /* __PLAT_OMAP_MULTI_H */
diff --git a/arch/arm/plat-omap/include/plat/nand.h b/arch/arm/plat-omap/include/plat/nand.h
index 67fc5060183e..1a68c1e5fe53 100644
--- a/arch/arm/plat-omap/include/plat/nand.h
+++ b/arch/arm/plat-omap/include/plat/nand.h
@@ -24,11 +24,10 @@ struct omap_nand_platform_data {
        struct gpmc_timings     *gpmc_t;
        int                     nr_parts;
        bool                    dev_ready;
-        int                     gpmc_irq;
        enum nand_io            xfer_type;
-        unsigned long           phys_base;
        int                     devsize;
        enum omap_ecc           ecc_opt;
+        struct gpmc_nand_regs   reg;
 };
 /* minimum size for IO mapping */
diff --git a/arch/arm/plat-omap/include/plat/omap-serial.h b/arch/arm/plat-omap/include/plat/omap-serial.h
index 1a52725ffcf2..a531149823bb 100644
--- a/arch/arm/plat-omap/include/plat/omap-serial.h
+++ b/arch/arm/plat-omap/include/plat/omap-serial.h
@@ -18,7 +18,7 @@
 #define __OMAP_SERIAL_H__
 #include <linux/serial_core.h>
-#include <linux/platform_device.h>
+#include <linux/device.h>
 #include <linux/pm_qos.h>
 #include <plat/mux.h>
@@ -42,10 +42,10 @@
 #define OMAP_UART_WER_MOD_WKUP  0X7F
 /* Enable XON/XOFF flow control on output */
-#define OMAP_UART_SW_TX         0x04
+#define OMAP_UART_SW_TX         0x8
 /* Enable XON/XOFF flow control on input */
-#define OMAP_UART_SW_RX         0x04
+#define OMAP_UART_SW_RX         0x2
 #define OMAP_UART_SYSC_RESET    0X07
 #define OMAP_UART_TCR_TRIG      0X0F
@@ -69,11 +69,14 @@ struct omap_uart_port_info {
        unsigned int            dma_rx_timeout;
        unsigned int            autosuspend_timeout;
        unsigned int            dma_rx_poll_rate;
+        int                     DTR_gpio;
+        int                     DTR_inverted;
+        int                     DTR_present;
        int (*get_context_loss_count)(struct device *);
-        void (*set_forceidle)(struct platform_device *);
+        void (*set_forceidle)(struct device *);
-        void (*set_noidle)(struct platform_device *);
+        void (*set_noidle)(struct device *);
-        void (*enable_wakeup)(struct platform_device *, bool);
+        void (*enable_wakeup)(struct device *, bool);
 };
 struct uart_omap_dma {
@@ -102,39 +105,4 @@ struct uart_omap_dma {
        unsigned int            rx_timeout;
 };
-struct uart_omap_port {
-        struct uart_port        port;
-        struct uart_omap_dma    uart_dma;
-        struct platform_device  *pdev;
-        unsigned char           ier;
-        unsigned char           lcr;
-        unsigned char           mcr;
-        unsigned char           fcr;
-        unsigned char           efr;
-        unsigned char           dll;
-        unsigned char           dlh;
-        unsigned char           mdr1;
-        unsigned char           scr;
-        int                     use_dma;
-        /*
-         * Some bits in registers are cleared on a read, so they must
-         * be saved whenever the register is read but the bits will not
-         * be immediately processed.
-         */
-        unsigned int            lsr_break_flag;
-        unsigned char           msr_saved_flags;
-        char                    name[20];
-        unsigned long           port_activity;
-        u32                     context_loss_cnt;
-        u32                     errata;
-        u8                      wakeups_enabled;
-        struct pm_qos_request   pm_qos_request;
-        u32                     latency;
-        u32                     calc_latency;
-        struct work_struct      qos_work;
-};
 #endif /* __OMAP_SERIAL_H__ */
diff --git a/arch/arm/plat-omap/include/plat/omap4-keypad.h b/arch/arm/plat-omap/include/plat/omap4-keypad.h
index 8ad0a377a54b..20de0d5a7e77 100644
--- a/arch/arm/plat-omap/include/plat/omap4-keypad.h
+++ b/arch/arm/plat-omap/include/plat/omap4-keypad.h
@@ -1,6 +1,8 @@
 #ifndef ARCH_ARM_PLAT_OMAP4_KEYPAD_H
 #define ARCH_ARM_PLAT_OMAP4_KEYPAD_H
+struct omap_board_data;
 extern int omap4_keyboard_init(struct omap4_keypad_platform_data *,
                                struct omap_board_data *);
 #endif
diff --git a/arch/arm/plat-omap/include/plat/uncompress.h b/arch/arm/plat-omap/include/plat/uncompress.h
index b8d19a136781..7f7b112acccb 100644
--- a/arch/arm/plat-omap/include/plat/uncompress.h
+++ b/arch/arm/plat-omap/include/plat/uncompress.h
@@ -110,7 +110,7 @@ static inline void flush(void)
        _DEBUG_LL_ENTRY(mach, AM33XX_UART##p##_BASE, OMAP_PORT_SHIFT,   \
                AM33XXUART##p)
-static inline void __arch_decomp_setup(unsigned long arch_id)
+static inline void arch_decomp_setup(void)
 {
        int port = 0;
@@ -198,8 +198,6 @@ static inline void __arch_decomp_setup(unsigned long arch_id)
        } while (0);
 }
-#define arch_decomp_setup()     __arch_decomp_setup(arch_id)
 /*
 * nothing to do
 */
diff --git a/arch/arm/plat-omap/include/plat/usb.h b/arch/arm/plat-omap/include/plat/usb.h
index 548a4c8d63df..bd20588c356b 100644
--- a/arch/arm/plat-omap/include/plat/usb.h
+++ b/arch/arm/plat-omap/include/plat/usb.h
@@ -5,7 +5,6 @@
 #include <linux/io.h>
 #include <linux/usb/musb.h>
-#include <plat/board.h>
 #define OMAP3_HS_USB_PORTS      3
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index 766181cb5c95..d861aa73299d 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -26,7 +26,6 @@
 #include <asm/mach/map.h>
 #include <plat/sram.h>
-#include <plat/board.h>
 #include <plat/cpu.h>
 #include "sram.h"
diff --git a/arch/arm/plat-orion/common.c b/arch/arm/plat-orion/common.c
index d245a87dc014..b8b747a9d360 100644
--- a/arch/arm/plat-orion/common.c
+++ b/arch/arm/plat-orion/common.c
@@ -291,10 +291,12 @@ static struct platform_device orion_ge00 = {
 void __init orion_ge00_init(struct mv643xx_eth_platform_data *eth_data,
                            unsigned long mapbase,
                            unsigned long irq,
-                            unsigned long irq_err)
+                            unsigned long irq_err,
+                            unsigned int tx_csum_limit)
 {
        fill_resources(&orion_ge00_shared, orion_ge00_shared_resources,
                       mapbase + 0x2000, SZ_16K - 1, irq_err);
+        orion_ge00_shared_data.tx_csum_limit = tx_csum_limit;
        ge_complete(&orion_ge00_shared_data,
                    orion_ge00_resources, irq, &orion_ge00_shared,
                    eth_data, &orion_ge00);
@@ -343,10 +345,12 @@ static struct platform_device orion_ge01 = {
 void __init orion_ge01_init(struct mv643xx_eth_platform_data *eth_data,
                            unsigned long mapbase,
                            unsigned long irq,
-                            unsigned long irq_err)
+                            unsigned long irq_err,
+                            unsigned int tx_csum_limit)
 {
        fill_resources(&orion_ge01_shared, orion_ge01_shared_resources,
                       mapbase + 0x2000, SZ_16K - 1, irq_err);
+        orion_ge01_shared_data.tx_csum_limit = tx_csum_limit;
        ge_complete(&orion_ge01_shared_data,
                    orion_ge01_resources, irq, &orion_ge01_shared,
                    eth_data, &orion_ge01);
diff --git a/arch/arm/plat-orion/include/plat/common.h b/arch/arm/plat-orion/include/plat/common.h
index e00fdb213609..ae2377ef63e5 100644
--- a/arch/arm/plat-orion/include/plat/common.h
+++ b/arch/arm/plat-orion/include/plat/common.h
@@ -39,12 +39,14 @@ void __init orion_rtc_init(unsigned long mapbase,
 void __init orion_ge00_init(struct mv643xx_eth_platform_data *eth_data,
                            unsigned long mapbase,
                            unsigned long irq,
-                            unsigned long irq_err);
+                            unsigned long irq_err,
+                            unsigned int tx_csum_limit);
 void __init orion_ge01_init(struct mv643xx_eth_platform_data *eth_data,
                            unsigned long mapbase,
                            unsigned long irq,
-                            unsigned long irq_err);
+                            unsigned long irq_err,
+                            unsigned int tx_csum_limit);
 void __init orion_ge10_init(struct mv643xx_eth_platform_data *eth_data,
                            unsigned long mapbase,
diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c
index 28f898f75380..db98e7021f0d 100644
--- a/arch/arm/plat-s3c24xx/dma.c
+++ b/arch/arm/plat-s3c24xx/dma.c
@@ -430,7 +430,7 @@ s3c2410_dma_canload(struct s3c2410_dma_chan *chan)
 * when necessary.
 */
-int s3c2410_dma_enqueue(unsigned int channel, void *id,
+int s3c2410_dma_enqueue(enum dma_ch channel, void *id,
                        dma_addr_t data, int size)
 {
        struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c
index 74e31ce35538..fc49f3dabd76 100644
--- a/arch/arm/plat-samsung/devs.c
+++ b/arch/arm/plat-samsung/devs.c
@@ -32,6 +32,8 @@
 #include <linux/platform_data/s3c-hsudc.h>
 #include <linux/platform_data/s3c-hsotg.h>
+#include <media/s5p_hdmi.h>
 #include <asm/irq.h>
 #include <asm/pmu.h>
 #include <asm/mach/arch.h>
@@ -748,7 +750,8 @@ void __init s5p_i2c_hdmiphy_set_platdata(struct s3c2410_platform_i2c *pd)
        if (!pd) {
                pd = &default_i2c_data;
-                if (soc_is_exynos4210())
+                if (soc_is_exynos4210() ||
+                    soc_is_exynos4212() || soc_is_exynos4412())
                        pd->bus_num = 8;
                else if (soc_is_s5pv210())
                        pd->bus_num = 3;
@@ -759,6 +762,30 @@ void __init s5p_i2c_hdmiphy_set_platdata(struct s3c2410_platform_i2c *pd)
        npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c),
                               &s5p_device_i2c_hdmiphy);
 }
+struct s5p_hdmi_platform_data s5p_hdmi_def_platdata;
+void __init s5p_hdmi_set_platdata(struct i2c_board_info *hdmiphy_info,
+                                  struct i2c_board_info *mhl_info, int mhl_bus)
+{
+        struct s5p_hdmi_platform_data *pd = &s5p_hdmi_def_platdata;
+        if (soc_is_exynos4210() ||
+            soc_is_exynos4212() || soc_is_exynos4412())
+                pd->hdmiphy_bus = 8;
+        else if (soc_is_s5pv210())
+                pd->hdmiphy_bus = 3;
+        else
+                pd->hdmiphy_bus = 0;
+        pd->hdmiphy_info = hdmiphy_info;
+        pd->mhl_info = mhl_info;
+        pd->mhl_bus = mhl_bus;
+        s3c_set_platdata(pd, sizeof(struct s5p_hdmi_platform_data),
+                         &s5p_device_hdmi);
+}
 #endif /* CONFIG_S5P_DEV_I2C_HDMIPHY */
 /* I2S */
diff --git a/arch/arm/plat-samsung/include/plat/hdmi.h b/arch/arm/plat-samsung/include/plat/hdmi.h
new file mode 100644
index 000000000000..331d046ac2c5
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/hdmi.h
@@ -0,0 +1,16 @@
+/*
+ * Copyright (C) 2012 Samsung Electronics Co.Ltd
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+#ifndef __PLAT_SAMSUNG_HDMI_H
+#define __PLAT_SAMSUNG_HDMI_H __FILE__
+extern void s5p_hdmi_set_platdata(struct i2c_board_info *hdmiphy_info,
+                                  struct i2c_board_info *mhl_info, int mhl_bus);
+#endif /* __PLAT_SAMSUNG_HDMI_H */
diff --git a/arch/arm/plat-samsung/pm.c b/arch/arm/plat-samsung/pm.c
index 64ab65f0fdbc..15070284343e 100644
--- a/arch/arm/plat-samsung/pm.c
+++ b/arch/arm/plat-samsung/pm.c
@@ -74,7 +74,7 @@ unsigned char pm_uart_udivslot;
 #ifdef CONFIG_SAMSUNG_PM_DEBUG
-struct pm_uart_save uart_save[CONFIG_SERIAL_SAMSUNG_UARTS];
+static struct pm_uart_save uart_save[CONFIG_SERIAL_SAMSUNG_UARTS];
 static void s3c_pm_save_uart(unsigned int uart, struct pm_uart_save *save)
 {