20 files changed, 20 insertions, 20 deletions

diff --git a/arch/arm/common/scoop.c b/arch/arm/common/scoop.c
index 7713a08bb10c..37bda5f3dde3 100644
--- a/arch/arm/common/scoop.c
+++ b/arch/arm/common/scoop.c
@@ -82,7 +82,7 @@ static int scoop_gpio_get(struct gpio_chip *chip, unsigned offset)
 {
         struct scoop_dev *sdev = container_of(chip, struct scoop_dev, gpio);
 
-        /* XXX: I'm usure,  but it seems so */
+        /* XXX: I'm unsure, but it seems so */
         return ioread16(sdev->base + SCOOP_GPRR) & (1 << (offset + 1));
 }
 
diff --git a/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h b/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h
index 375066ad0186..cbf334d1c761 100644
--- a/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h
+++ b/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h
@@ -83,7 +83,7 @@ typedef struct {
 *  @brief   Get next available transaction width
 *
 *
-*  @return  On sucess  : Next avail able transaction width
+*  @return  On success  : Next available transaction width
 *           On failure : dmacHw_TRANSACTION_WIDTH_8
 *
 *  @note
diff --git a/arch/arm/mach-bcmring/include/mach/dma.h b/arch/arm/mach-bcmring/include/mach/dma.h
index 847980c85c88..1f2c5319c056 100644
--- a/arch/arm/mach-bcmring/include/mach/dma.h
+++ b/arch/arm/mach-bcmring/include/mach/dma.h
@@ -651,7 +651,7 @@ int dma_map_add_region(DMA_MemMap_t *memMap,	/* Stores state information about t
 /**
 *   Creates a descriptor ring from a memory mapping.
 *
-*   @return 0 on sucess, error code otherwise.
+*   @return 0 on success, error code otherwise.
 */
 /****************************************************************************/
 
diff --git a/arch/arm/mach-lh7a40x/include/mach/hardware.h b/arch/arm/mach-lh7a40x/include/mach/hardware.h
index 48e827d2fa56..59d2ace35217 100644
--- a/arch/arm/mach-lh7a40x/include/mach/hardware.h
+++ b/arch/arm/mach-lh7a40x/include/mach/hardware.h
@@ -31,7 +31,7 @@
 /*
  * This __REG() version gives the same results as the one above,  except
  * that we are fooling gcc somehow so it generates far better and smaller
- * assembly code for access to contigous registers.  It's a shame that gcc
+ * assembly code for access to contiguous registers.  It's a shame that gcc
  * doesn't guess this by itself.
  */
 #include <asm/types.h>
diff --git a/arch/arm/mach-orion5x/pci.c b/arch/arm/mach-orion5x/pci.c
index 36dc5413cc97..bdf96eb523bc 100644
--- a/arch/arm/mach-orion5x/pci.c
+++ b/arch/arm/mach-orion5x/pci.c
@@ -463,7 +463,7 @@ static void __init orion5x_setup_pci_wins(struct mbus_dram_target_info *dram)
         writel(win_enable, PCI_BAR_ENABLE);
 
         /*
-         * Disable automatic update of address remaping when writing to BARs.
+         * Disable automatic update of address remapping when writing to BARs.
          */
         orion5x_setbits(PCI_ADDR_DECODE_CTRL, 1);
 }
diff --git a/arch/arm/mach-pxa/include/mach/palmld.h b/arch/arm/mach-pxa/include/mach/palmld.h
index 8721b8010221..ae536e86d8e8 100644
--- a/arch/arm/mach-pxa/include/mach/palmld.h
+++ b/arch/arm/mach-pxa/include/mach/palmld.h
@@ -91,7 +91,7 @@
 /* BATTERY */
 #define PALMLD_BAT_MAX_VOLTAGE          4000    /* 4.00V maximum voltage */
 #define PALMLD_BAT_MIN_VOLTAGE          3550    /* 3.55V critical voltage */
-#define PALMLD_BAT_MAX_CURRENT          0       /* unknokn */
+#define PALMLD_BAT_MAX_CURRENT          0       /* unknown */
 #define PALMLD_BAT_MIN_CURRENT          0       /* unknown */
 #define PALMLD_BAT_MAX_CHARGE           1       /* unknown */
 #define PALMLD_BAT_MIN_CHARGE           1       /* unknown */
diff --git a/arch/arm/mach-pxa/include/mach/palmt5.h b/arch/arm/mach-pxa/include/mach/palmt5.h
index d15662aba008..6baf7469d4ec 100644
--- a/arch/arm/mach-pxa/include/mach/palmt5.h
+++ b/arch/arm/mach-pxa/include/mach/palmt5.h
@@ -66,7 +66,7 @@
 /* BATTERY */
 #define PALMT5_BAT_MAX_VOLTAGE          4000    /* 4.00v current voltage */
 #define PALMT5_BAT_MIN_VOLTAGE          3550    /* 3.55v critical voltage */
-#define PALMT5_BAT_MAX_CURRENT          0       /* unknokn */
+#define PALMT5_BAT_MAX_CURRENT          0       /* unknown */
 #define PALMT5_BAT_MIN_CURRENT          0       /* unknown */
 #define PALMT5_BAT_MAX_CHARGE           1       /* unknown */
 #define PALMT5_BAT_MIN_CHARGE           1       /* unknown */
diff --git a/arch/arm/mach-pxa/include/mach/palmtc.h b/arch/arm/mach-pxa/include/mach/palmtc.h
index 3dc9b074ab46..3f9dd3fd4638 100644
--- a/arch/arm/mach-pxa/include/mach/palmtc.h
+++ b/arch/arm/mach-pxa/include/mach/palmtc.h
@@ -68,7 +68,7 @@
 /* BATTERY */
 #define PALMTC_BAT_MAX_VOLTAGE          4000    /* 4.00V maximum voltage */
 #define PALMTC_BAT_MIN_VOLTAGE          3550    /* 3.55V critical voltage */
-#define PALMTC_BAT_MAX_CURRENT          0       /* unknokn */
+#define PALMTC_BAT_MAX_CURRENT          0       /* unknown */
 #define PALMTC_BAT_MIN_CURRENT          0       /* unknown */
 #define PALMTC_BAT_MAX_CHARGE           1       /* unknown */
 #define PALMTC_BAT_MIN_CHARGE           1       /* unknown */
diff --git a/arch/arm/mach-pxa/include/mach/palmte2.h b/arch/arm/mach-pxa/include/mach/palmte2.h
index 12361341f9d8..f89e989a7637 100644
--- a/arch/arm/mach-pxa/include/mach/palmte2.h
+++ b/arch/arm/mach-pxa/include/mach/palmte2.h
@@ -59,7 +59,7 @@
 /* BATTERY */
 #define PALMTE2_BAT_MAX_VOLTAGE         4000    /* 4.00v current voltage */
 #define PALMTE2_BAT_MIN_VOLTAGE         3550    /* 3.55v critical voltage */
-#define PALMTE2_BAT_MAX_CURRENT         0       /* unknokn */
+#define PALMTE2_BAT_MAX_CURRENT         0       /* unknown */
 #define PALMTE2_BAT_MIN_CURRENT         0       /* unknown */
 #define PALMTE2_BAT_MAX_CHARGE          1       /* unknown */
 #define PALMTE2_BAT_MIN_CHARGE          1       /* unknown */
diff --git a/arch/arm/mach-pxa/include/mach/palmtx.h b/arch/arm/mach-pxa/include/mach/palmtx.h
index 1be0db6ed55e..10abc4f2e8e4 100644
--- a/arch/arm/mach-pxa/include/mach/palmtx.h
+++ b/arch/arm/mach-pxa/include/mach/palmtx.h
@@ -94,7 +94,7 @@
 /* BATTERY */
 #define PALMTX_BAT_MAX_VOLTAGE          4000    /* 4.00v current voltage */
 #define PALMTX_BAT_MIN_VOLTAGE          3550    /* 3.55v critical voltage */
-#define PALMTX_BAT_MAX_CURRENT          0       /* unknokn */
+#define PALMTX_BAT_MAX_CURRENT          0       /* unknown */
 #define PALMTX_BAT_MIN_CURRENT          0       /* unknown */
 #define PALMTX_BAT_MAX_CHARGE           1       /* unknown */
 #define PALMTX_BAT_MIN_CHARGE           1       /* unknown */
diff --git a/arch/arm/mach-pxa/include/mach/palmz72.h b/arch/arm/mach-pxa/include/mach/palmz72.h
index 2806ef69ba5a..2bbcf70dd935 100644
--- a/arch/arm/mach-pxa/include/mach/palmz72.h
+++ b/arch/arm/mach-pxa/include/mach/palmz72.h
@@ -49,7 +49,7 @@
 /* Battery */
 #define PALMZ72_BAT_MAX_VOLTAGE         4000    /* 4.00v current voltage */
 #define PALMZ72_BAT_MIN_VOLTAGE         3550    /* 3.55v critical voltage */
-#define PALMZ72_BAT_MAX_CURRENT         0       /* unknokn */
+#define PALMZ72_BAT_MAX_CURRENT         0       /* unknown */
 #define PALMZ72_BAT_MIN_CURRENT         0       /* unknown */
 #define PALMZ72_BAT_MAX_CHARGE          1       /* unknown */
 #define PALMZ72_BAT_MIN_CHARGE          1       /* unknown */
diff --git a/arch/arm/mach-s3c6400/setup-sdhci.c b/arch/arm/mach-s3c6400/setup-sdhci.c
index b93dafbee1f4..1039937403be 100644
--- a/arch/arm/mach-s3c6400/setup-sdhci.c
+++ b/arch/arm/mach-s3c6400/setup-sdhci.c
@@ -30,7 +30,7 @@ char *s3c6400_hsmmc_clksrcs[4] = {
         [0] = "hsmmc",
         [1] = "hsmmc",
         [2] = "mmc_bus",
-        /* [3] = "48m", - note not succesfully used yet */
+        /* [3] = "48m", - note not successfully used yet */
 };
 
 void s3c6400_setup_sdhci_cfg_card(struct platform_device *dev,
diff --git a/arch/arm/mach-s3c6410/setup-sdhci.c b/arch/arm/mach-s3c6410/setup-sdhci.c
index 20666f3bd478..816d2d9f9ef8 100644
--- a/arch/arm/mach-s3c6410/setup-sdhci.c
+++ b/arch/arm/mach-s3c6410/setup-sdhci.c
@@ -30,7 +30,7 @@ char *s3c6410_hsmmc_clksrcs[4] = {
         [0] = "hsmmc",
         [1] = "hsmmc",
         [2] = "mmc_bus",
-        /* [3] = "48m", - note not succesfully used yet */
+        /* [3] = "48m", - note not successfully used yet */
 };
 
 
diff --git a/arch/arm/mach-sa1100/dma.c b/arch/arm/mach-sa1100/dma.c
index cb4521a6f42d..ad660350c296 100644
--- a/arch/arm/mach-sa1100/dma.c
+++ b/arch/arm/mach-sa1100/dma.c
@@ -65,7 +65,7 @@ static irqreturn_t dma_irq_handler(int irq, void *dev_id)
 
 
 /**
- *      sa1100_request_dma - allocate one of the SA11x0's DMA chanels
+ *      sa1100_request_dma - allocate one of the SA11x0's DMA channels
  *      @device: The SA11x0 peripheral targeted by this request
  *      @device_id: An ascii name for the claiming device
  *      @callback: Function to be called when the DMA completes
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx3.h b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
index 446f86763816..0c7802bbeccb 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx3.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
@@ -112,7 +112,7 @@ enum iomux_gp_func {
  * setups a single pin:
  *      - reserves the pin so that it is not claimed by another driver
  *      - setups the iomux according to the configuration
- *      - if the pin is configured as a GPIO, we claim it throug kernel gpiolib
+ *      - if the pin is configured as a GPIO, we claim it through kernel gpiolib
  */
 int mxc_iomux_alloc_pin(const unsigned int pin, const char *label);
 /*
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mxc91231.h b/arch/arm/plat-mxc/include/mach/iomux-mxc91231.h
index 9f13061192c8..3887f3fe29d4 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mxc91231.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mxc91231.h
@@ -48,7 +48,7 @@
  * setups a single pin:
  *      - reserves the pin so that it is not claimed by another driver
  *      - setups the iomux according to the configuration
- *      - if the pin is configured as a GPIO, we claim it throug kernel gpiolib
+ *      - if the pin is configured as a GPIO, we claim it through kernel gpiolib
  */
 int mxc_iomux_alloc_pin(const unsigned int pin_mode, const char *label);
 /*
diff --git a/arch/arm/plat-mxc/pwm.c b/arch/arm/plat-mxc/pwm.c
index 5cdbd605ac05..4ff6dfe04283 100644
--- a/arch/arm/plat-mxc/pwm.c
+++ b/arch/arm/plat-mxc/pwm.c
@@ -94,7 +94,7 @@ int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns)
                  * register to follow the ratio of duty_ns vs. period_ns
                  * accordingly.
                  *
-                 * This is good enought for programming the brightness of
+                 * This is good enough for programming the brightness of
                  * the LCD backlight.
                  *
                  * The real implementation would divide PERCLK[0] first by
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index b53125f41293..0e308913291b 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -1232,7 +1232,7 @@ static void create_dma_lch_chain(int lch_head, int lch_queue)
  *                                            OMAP_DMA_DYNAMIC_CHAIN
  * @params - Channel parameters
  *
- * @return - Succes : 0
+ * @return - Success : 0
  *           Failure: -EINVAL/-ENOMEM
  */
 int omap_request_dma_chain(int dev_id, const char *dev_name,
diff --git a/arch/arm/plat-omap/include/mach/omap16xx.h b/arch/arm/plat-omap/include/mach/omap16xx.h
index 0e69b504c25f..7560b4d583a3 100644
--- a/arch/arm/plat-omap/include/mach/omap16xx.h
+++ b/arch/arm/plat-omap/include/mach/omap16xx.h
@@ -124,7 +124,7 @@
 #define TIPB_SWITCH_BASE                 (0xfffbc800)
 #define OMAP16XX_MMCSD2_SSW_MPU_CONF    (TIPB_SWITCH_BASE + 0x160)
 
-/* UART3 Registers Maping through MPU bus */
+/* UART3 Registers Mapping through MPU bus */
 #define UART3_RHR               (OMAP_UART3_BASE + 0)
 #define UART3_THR               (OMAP_UART3_BASE + 0)
 #define UART3_DLL               (OMAP_UART3_BASE + 0)
diff --git a/arch/arm/plat-s3c24xx/include/plat/map.h b/arch/arm/plat-s3c24xx/include/plat/map.h
index c4d133436fc7..bd534d32b993 100644
--- a/arch/arm/plat-s3c24xx/include/plat/map.h
+++ b/arch/arm/plat-s3c24xx/include/plat/map.h
@@ -64,7 +64,7 @@
 /* the calculation for the VA of this must ensure that
  * it is the same distance apart from the UART in the
  * phsyical address space, as the initial mapping for the IO
- * is done as a 1:1 maping. This puts it (currently) at
+ * is done as a 1:1 mapping. This puts it (currently) at
  * 0xFA800000, which is not in the way of any current mapping
  * by the base system.
 */