59 files changed, 1822 insertions, 342 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index dae718ab1d66..c941fd06b2af 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1583,6 +1583,7 @@ config ARCH_NR_GPIO
         int
         default 1024 if ARCH_SHMOBILE || ARCH_TEGRA
         default 355 if ARCH_U8500
+        default 264 if MACH_H4700
         default 0
         help
           Maximum number of GPIOs in the system.
diff --git a/arch/arm/boot/dts/kirkwood-dreamplug.dts b/arch/arm/boot/dts/kirkwood-dreamplug.dts
new file mode 100644
index 000000000000..8a5dff807b45
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-dreamplug.dts
@@ -0,0 +1,25 @@
+/dts-v1/;
+
+/include/ "kirkwood.dtsi"
+
+/ {
+        model = "Globalscale Technologies Dreamplug";
+        compatible = "globalscale,dreamplug-003-ds2001", "globalscale,dreamplug", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+        memory {
+                device_type = "memory";
+                reg = <0x00000000 0x20000000>;
+        };
+
+        chosen {
+                bootargs = "console=ttyS0,115200n8 earlyprintk";
+        };
+
+        serial@f1012000 {
+                compatible = "ns16550a";
+                reg = <0xf1012000 0xff>;
+                reg-shift = <2>;
+                interrupts = <33>;
+                clock-frequency = <200000000>;
+        };
+};
diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi
new file mode 100644
index 000000000000..771c6bbeb29a
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood.dtsi
@@ -0,0 +1,6 @@
+/include/ "skeleton.dtsi"
+
+/ {
+        compatible = "marvell,kirkwood";
+};
+
diff --git a/arch/arm/boot/dts/tegra-paz00.dts b/arch/arm/boot/dts/tegra-paz00.dts
index 825d2957da0b..61f385809970 100644
--- a/arch/arm/boot/dts/tegra-paz00.dts
+++ b/arch/arm/boot/dts/tegra-paz00.dts
@@ -35,6 +35,11 @@
 
         i2c@7000d000 {
                 clock-frequency = <400000>;
+
+                adt7461@4c {
+                        compatible = "adi,adt7461";
+                        reg = <0x4c>;
+                };
         };
 
         serial@70006000 {
@@ -74,4 +79,25 @@
         sdhci@c8000600 {
                 support-8bit;
         };
+
+        gpio-keys {
+                compatible = "gpio-keys";
+
+                power {
+                        label = "Power";
+                        gpios = <&gpio 79 1>; /* gpio PJ7, active low */
+                        linux,code = <116>; /* KEY_POWER */
+                        gpio-key,wakeup;
+                };
+        };
+
+        gpio-leds {
+                compatible = "gpio-leds";
+
+                wifi {
+                        label = "wifi-led";
+                        gpios = <&gpio 24 0>;
+                        linux,default-trigger = "rfkill0";
+                };
+        };
 };
diff --git a/arch/arm/configs/tegra_defconfig b/arch/arm/configs/tegra_defconfig
index fd5d3041d717..351d6708c3ae 100644
--- a/arch/arm/configs/tegra_defconfig
+++ b/arch/arm/configs/tegra_defconfig
@@ -11,11 +11,14 @@ CONFIG_RT_GROUP_SCHED=y
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_ELF_CORE is not set
 CONFIG_EMBEDDED=y
+CONFIG_PERF_EVENTS=y
 CONFIG_SLAB=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_EFI_PARTITION=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
 CONFIG_ARCH_TEGRA=y
@@ -27,18 +30,20 @@ CONFIG_MACH_PAZ00=y
 CONFIG_MACH_TRIMSLICE=y
 CONFIG_MACH_WARIO=y
 CONFIG_MACH_VENTANA=y
-CONFIG_TEGRA_DEBUG_UARTD=y
-CONFIG_ARM_ERRATA_742230=y
+CONFIG_TEGRA_EMC_SCALING_ENABLE=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_SMP=y
-CONFIG_NR_CPUS=2
 CONFIG_PREEMPT=y
 CONFIG_AEABI=y
 # CONFIG_OABI_COMPAT is not set
 CONFIG_HIGHMEM=y
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_AUTO_ZRELADDR=y
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
+CONFIG_CPU_IDLE=y
 CONFIG_VFP=y
 CONFIG_NET=y
 CONFIG_PACKET=y
@@ -68,7 +73,6 @@ CONFIG_IPV6_MULTIPLE_TABLES=y
 # CONFIG_FIRMWARE_IN_KERNEL is not set
 CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_LOOP=y
-CONFIG_MISC_DEVICES=y
 CONFIG_AD525X_DPOT=y
 CONFIG_AD525X_DPOT_I2C=y
 CONFIG_ICS932S401=y
@@ -76,6 +80,7 @@ CONFIG_APDS9802ALS=y
 CONFIG_ISL29003=y
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
+CONFIG_BLK_DEV_SR=y
 # CONFIG_SCSI_LOWLEVEL is not set
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=y
@@ -85,8 +90,7 @@ CONFIG_USB_USBNET=y
 CONFIG_USB_NET_SMSC75XX=y
 CONFIG_USB_NET_SMSC95XX=y
 # CONFIG_WLAN is not set
-# CONFIG_INPUT is not set
-# CONFIG_SERIO is not set
+CONFIG_INPUT_EVDEV=y
 # CONFIG_VT is not set
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_DEVKMEM is not set
@@ -96,13 +100,15 @@ CONFIG_SERIAL_OF_PLATFORM=y
 # CONFIG_HW_RANDOM is not set
 CONFIG_I2C=y
 # CONFIG_I2C_COMPAT is not set
-# CONFIG_I2C_HELPER_AUTO is not set
 CONFIG_I2C_TEGRA=y
 CONFIG_SPI=y
 CONFIG_SPI_TEGRA=y
 CONFIG_SENSORS_LM90=y
 CONFIG_MFD_TPS6586X=y
 CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_REGULATOR_VIRTUAL_CONSUMER=y
+CONFIG_REGULATOR_GPIO=y
 CONFIG_REGULATOR_TPS6586X=y
 CONFIG_SOUND=y
 CONFIG_SND=y
@@ -116,11 +122,13 @@ CONFIG_SND_SOC=y
 CONFIG_SND_SOC_TEGRA=y
 CONFIG_SND_SOC_TEGRA_WM8903=y
 CONFIG_SND_SOC_TEGRA_TRIMSLICE=y
+CONFIG_SND_SOC_TEGRA_ALC5632=y
 CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_TEGRA=y
 CONFIG_USB_STORAGE=y
 CONFIG_MMC=y
+CONFIG_MMC_BLOCK_MINORS=16
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_PLTFM=y
 CONFIG_MMC_SDHCI_TEGRA=y
@@ -130,6 +138,11 @@ CONFIG_STAGING=y
 CONFIG_IIO=y
 CONFIG_SENSORS_ISL29018=y
 CONFIG_SENSORS_AK8975=y
+CONFIG_MFD_NVEC=y
+CONFIG_KEYBOARD_NVEC=y
+CONFIG_SERIO_NVEC_PS2=y
+CONFIG_TEGRA_IOMMU_GART=y
+CONFIG_TEGRA_IOMMU_SMMU=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
@@ -138,13 +151,12 @@ CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_POSIX_ACL=y
 CONFIG_EXT3_FS_SECURITY=y
+CONFIG_EXT4_FS=y
 # CONFIG_DNOTIFY is not set
 CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
 CONFIG_NFS_FS=y
 CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_EFI_PARTITION=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_PRINTK_TIME=y
@@ -162,9 +174,8 @@ CONFIG_DEBUG_SG=y
 CONFIG_DEBUG_LL=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_AES=y
 CONFIG_CRYPTO_ARC4=y
 CONFIG_CRYPTO_TWOFISH=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_DEV_TEGRA_AES=y
 CONFIG_CRC_CCITT=y
-CONFIG_CRC16=y
diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index dfad6538b273..98997c2da262 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -179,7 +179,9 @@ config MACH_SMDKV310
         select S5P_DEV_FIMC1
         select S5P_DEV_FIMC2
         select S5P_DEV_FIMC3
+        select S5P_DEV_G2D
         select S5P_DEV_I2C_HDMIPHY
+        select S5P_DEV_JPEG
         select S5P_DEV_MFC
         select S5P_DEV_TV
         select S5P_DEV_USB_EHCI
@@ -225,7 +227,9 @@ config MACH_UNIVERSAL_C210
         select S5P_DEV_FIMC1
         select S5P_DEV_FIMC2
         select S5P_DEV_FIMC3
+        select S5P_DEV_G2D
         select S5P_DEV_CSIS0
+        select S5P_DEV_JPEG
         select S5P_DEV_FIMD0
         select S3C_DEV_HSMMC
         select S3C_DEV_HSMMC2
@@ -262,11 +266,14 @@ config MACH_NURI
         select S3C_DEV_I2C1
         select S3C_DEV_I2C3
         select S3C_DEV_I2C5
+        select S3C_DEV_I2C6
         select S5P_DEV_CSIS0
+        select S5P_DEV_JPEG
         select S5P_DEV_FIMC0
         select S5P_DEV_FIMC1
         select S5P_DEV_FIMC2
         select S5P_DEV_FIMC3
+        select S5P_DEV_G2D
         select S5P_DEV_MFC
         select S5P_DEV_USB_EHCI
         select S5P_SETUP_MIPIPHY
@@ -276,6 +283,7 @@ config MACH_NURI
         select EXYNOS4_SETUP_I2C1
         select EXYNOS4_SETUP_I2C3
         select EXYNOS4_SETUP_I2C5
+        select EXYNOS4_SETUP_I2C6
         select EXYNOS4_SETUP_SDHCI
         select EXYNOS4_SETUP_USB_PHY
         select S5P_SETUP_MIPIPHY
@@ -296,7 +304,9 @@ config MACH_ORIGEN
         select S5P_DEV_FIMC2
         select S5P_DEV_FIMC3
         select S5P_DEV_FIMD0
+        select S5P_DEV_G2D
         select S5P_DEV_I2C_HDMIPHY
+        select S5P_DEV_JPEG
         select S5P_DEV_MFC
         select S5P_DEV_TV
         select S5P_DEV_USB_EHCI
diff --git a/arch/arm/mach-exynos/mach-nuri.c b/arch/arm/mach-exynos/mach-nuri.c
index aa37179d776c..191f5c675fe1 100644
--- a/arch/arm/mach-exynos/mach-nuri.c
+++ b/arch/arm/mach-exynos/mach-nuri.c
@@ -28,6 +28,7 @@
 
 #include <video/platform_lcd.h>
 #include <media/m5mols.h>
+#include <media/s5k6aa.h>
 #include <media/s5p_fimc.h>
 #include <media/v4l2-mediabus.h>
 
@@ -75,6 +76,7 @@ enum fixed_regulator_id {
         FIXED_REG_ID_MAX8903,
         FIXED_REG_ID_CAM_A28V,
         FIXED_REG_ID_CAM_12V,
+        FIXED_REG_ID_CAM_VT_15V,
 };
 
 static struct s3c2410_uartcfg nuri_uartcfgs[] __initdata = {
@@ -399,6 +401,9 @@ static struct regulator_consumer_supply __initdata max8997_ldo4_[] = {
 static struct regulator_consumer_supply __initdata max8997_ldo5_[] = {
         REGULATOR_SUPPLY("vhsic", "modemctl"), /* MODEM */
 };
+static struct regulator_consumer_supply nuri_max8997_ldo6_consumer[] = {
+        REGULATOR_SUPPLY("vdd_reg", "6-003c"), /* S5K6AA camera */
+};
 static struct regulator_consumer_supply __initdata max8997_ldo7_[] = {
         REGULATOR_SUPPLY("dig_18", "0-001f"), /* HCD803 */
 };
@@ -431,7 +436,7 @@ static struct regulator_consumer_supply __initdata max8997_buck1_[] = {
         REGULATOR_SUPPLY("vdd_arm", NULL), /* CPUFREQ */
 };
 static struct regulator_consumer_supply __initdata max8997_buck2_[] = {
-        REGULATOR_SUPPLY("vdd_int", NULL), /* CPUFREQ */
+        REGULATOR_SUPPLY("vdd_int", "exynos4210-busfreq.0"), /* CPUFREQ */
 };
 static struct regulator_consumer_supply __initdata max8997_buck3_[] = {
         REGULATOR_SUPPLY("vdd", "mali_dev.0"), /* G3D of Exynos 4 */
@@ -546,6 +551,8 @@ static struct regulator_init_data __initdata max8997_ldo6_data = {
                         .enabled        = 1,
                 },
         },
+        .num_consumer_supplies  = ARRAY_SIZE(nuri_max8997_ldo6_consumer),
+        .consumer_supplies      = nuri_max8997_ldo6_consumer,
 };
 
 static struct regulator_init_data __initdata max8997_ldo7_data = {
@@ -742,7 +749,7 @@ static struct regulator_init_data __initdata max8997_buck2_data = {
         .constraints    = {
                 .name           = "VINT_1.1V_C210",
                 .min_uV         = 900000,
-                .max_uV         = 1100000,
+                .max_uV         = 1200000,
                 .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
                 .always_on      = 1,
                 .state_mem      = {
@@ -957,7 +964,6 @@ static struct max8997_platform_data __initdata nuri_max8997_pdata = {
         .regulators             = nuri_max8997_regulators,
 
         .buck125_gpios = { EXYNOS4_GPX0(5), EXYNOS4_GPX0(6), EXYNOS4_GPL0(0) },
-        .buck2_gpiodvs = true,
 
         .buck1_voltage[0] = 1350000, /* 1.35V */
         .buck1_voltage[1] = 1300000, /* 1.3V */
@@ -1116,7 +1122,30 @@ static void __init nuri_ehci_init(void)
 }
 
 /* CAMERA */
+static struct regulator_consumer_supply cam_vt_cam15_supply =
+        REGULATOR_SUPPLY("vdd_core", "6-003c");
+
+static struct regulator_init_data cam_vt_cam15_reg_init_data = {
+        .constraints = { .valid_ops_mask = REGULATOR_CHANGE_STATUS },
+        .num_consumer_supplies = 1,
+        .consumer_supplies = &cam_vt_cam15_supply,
+};
+
+static struct fixed_voltage_config cam_vt_cam15_fixed_voltage_cfg = {
+        .supply_name    = "VT_CAM_1.5V",
+        .microvolts     = 1500000,
+        .gpio           = EXYNOS4_GPE2(2), /* VT_CAM_1.5V_EN */
+        .enable_high    = 1,
+        .init_data      = &cam_vt_cam15_reg_init_data,
+};
+
+static struct platform_device cam_vt_cam15_fixed_rdev = {
+        .name = "reg-fixed-voltage", .id = FIXED_REG_ID_CAM_VT_15V,
+        .dev = { .platform_data = &cam_vt_cam15_fixed_voltage_cfg },
+};
+
 static struct regulator_consumer_supply cam_vdda_supply[] = {
+        REGULATOR_SUPPLY("vdda", "6-003c"),
         REGULATOR_SUPPLY("a_sensor", "0-001f"),
 };
 
@@ -1173,6 +1202,21 @@ static struct s5p_platform_mipi_csis mipi_csis_platdata = {
 
 #define GPIO_CAM_MEGA_RST       EXYNOS4_GPY3(7) /* ISP_RESET */
 #define GPIO_CAM_8M_ISP_INT     EXYNOS4_GPL2(5)
+#define GPIO_CAM_VT_NSTBY       EXYNOS4_GPL2(0)
+#define GPIO_CAM_VT_NRST        EXYNOS4_GPL2(1)
+
+static struct s5k6aa_platform_data s5k6aa_pldata = {
+        .mclk_frequency = 24000000UL,
+        .gpio_reset     = { GPIO_CAM_VT_NRST, 0 },
+        .gpio_stby      = { GPIO_CAM_VT_NSTBY, 0 },
+        .bus_type       = V4L2_MBUS_PARALLEL,
+        .horiz_flip     = 1,
+};
+
+static struct i2c_board_info s5k6aa_board_info = {
+        I2C_BOARD_INFO("S5K6AA", 0x3c),
+        .platform_data = &s5k6aa_pldata,
+};
 
 static struct m5mols_platform_data m5mols_platdata = {
         .gpio_reset = GPIO_CAM_MEGA_RST,
@@ -1185,6 +1229,13 @@ static struct i2c_board_info m5mols_board_info = {
 
 static struct s5p_fimc_isp_info nuri_camera_sensors[] = {
         {
+                .flags          = V4L2_MBUS_PCLK_SAMPLE_RISING |
+                                  V4L2_MBUS_VSYNC_ACTIVE_LOW,
+                .bus_type       = FIMC_ITU_601,
+                .board_info     = &s5k6aa_board_info,
+                .clk_frequency  = 24000000UL,
+                .i2c_bus_num    = 6,
+        }, {
                 .flags          = V4L2_MBUS_PCLK_SAMPLE_FALLING |
                                   V4L2_MBUS_VSYNC_ACTIVE_LOW,
                 .bus_type       = FIMC_MIPI_CSI2,
@@ -1200,11 +1251,13 @@ static struct s5p_platform_fimc fimc_md_platdata = {
 };
 
 static struct gpio nuri_camera_gpios[] = {
+        { GPIO_CAM_VT_NSTBY,    GPIOF_OUT_INIT_LOW, "CAM_VGA_NSTBY" },
+        { GPIO_CAM_VT_NRST,     GPIOF_OUT_INIT_LOW, "CAM_VGA_NRST"  },
         { GPIO_CAM_8M_ISP_INT,  GPIOF_IN,           "8M_ISP_INT"  },
         { GPIO_CAM_MEGA_RST,    GPIOF_OUT_INIT_LOW, "CAM_8M_NRST" },
 };
 
-static void nuri_camera_init(void)
+static void __init nuri_camera_init(void)
 {
         s3c_set_platdata(&mipi_csis_platdata, sizeof(mipi_csis_platdata),
                          &s5p_device_mipi_csis0);
@@ -1224,6 +1277,8 @@ static void nuri_camera_init(void)
                 pr_err("%s: Failed to configure 8M_ISP_INT GPIO\n", __func__);
 
         /* Free GPIOs controlled directly by the sensor drivers. */
+        gpio_free(GPIO_CAM_VT_NRST);
+        gpio_free(GPIO_CAM_VT_NSTBY);
         gpio_free(GPIO_CAM_MEGA_RST);
 
         if (exynos4_fimc_setup_gpio(S5P_CAMPORT_A)) {
@@ -1234,15 +1289,27 @@ static void nuri_camera_init(void)
         s5p_gpio_set_drvstr(EXYNOS4_GPJ1(3), S5P_GPIO_DRVSTR_LV4);
 }
 
+static struct s3c2410_platform_i2c nuri_i2c6_platdata __initdata = {
+        .frequency      = 400000U,
+        .sda_delay      = 200,
+        .bus_num        = 6,
+};
+
 static struct s3c2410_platform_i2c nuri_i2c0_platdata __initdata = {
         .frequency      = 400000U,
         .sda_delay      = 200,
 };
 
+/* DEVFREQ controlling memory/bus */
+static struct platform_device exynos4_bus_devfreq = {
+        .name                   = "exynos4210-busfreq",
+};
+
 static struct platform_device *nuri_devices[] __initdata = {
         /* Samsung Platform Devices */
         &s3c_device_i2c5, /* PMIC should initialize first */
         &s3c_device_i2c0,
+        &s3c_device_i2c6,
         &emmc_fixed_voltage,
         &s5p_device_mipi_csis0,
         &s5p_device_fimc0,
@@ -1259,6 +1326,8 @@ static struct platform_device *nuri_devices[] __initdata = {
         &s3c_device_i2c3,
         &i2c9_gpio,
         &s3c_device_adc,
+        &s5p_device_g2d,
+        &s5p_device_jpeg,
         &s3c_device_rtc,
         &s5p_device_mfc,
         &s5p_device_mfc_l,
@@ -1271,8 +1340,10 @@ static struct platform_device *nuri_devices[] __initdata = {
         &nuri_backlight_device,
         &max8903_fixed_reg_dev,
         &nuri_max8903_device,
+        &cam_vt_cam15_fixed_rdev,
         &cam_vdda_fixed_rdev,
         &cam_8m_12v_fixed_rdev,
+        &exynos4_bus_devfreq,
 };
 
 static void __init nuri_map_io(void)
@@ -1302,6 +1373,7 @@ static void __init nuri_machine_init(void)
         i2c_register_board_info(5, i2c5_devs, ARRAY_SIZE(i2c5_devs));
         i2c9_devs[I2C9_MAX17042].irq = gpio_to_irq(EXYNOS4_GPX2(3));
         i2c_register_board_info(9, i2c9_devs, ARRAY_SIZE(i2c9_devs));
+        s3c_i2c6_set_platdata(&nuri_i2c6_platdata);
 
         s5p_fimd0_set_platdata(&nuri_fb_pdata);
 
diff --git a/arch/arm/mach-exynos/mach-origen.c b/arch/arm/mach-exynos/mach-origen.c
index b4d032d5c878..878d4c99142d 100644
--- a/arch/arm/mach-exynos/mach-origen.c
+++ b/arch/arm/mach-exynos/mach-origen.c
@@ -20,6 +20,7 @@
 #include <linux/regulator/machine.h>
 #include <linux/mfd/max8997.h>
 #include <linux/lcd.h>
+#include <linux/rfkill-gpio.h>
 
 #include <asm/mach/arch.h>
 #include <asm/hardware/gic.h>
@@ -235,6 +236,7 @@ static struct regulator_init_data __initdata max8997_ldo9_data = {
                 .min_uV         = 2800000,
                 .max_uV         = 2800000,
                 .apply_uV       = 1,
+                .always_on      = 1,
                 .valid_ops_mask = REGULATOR_CHANGE_STATUS,
                 .state_mem      = {
                         .disabled       = 1,
@@ -278,6 +280,7 @@ static struct regulator_init_data __initdata max8997_ldo14_data = {
                 .min_uV         = 1800000,
                 .max_uV         = 1800000,
                 .apply_uV       = 1,
+                .always_on      = 1,
                 .valid_ops_mask = REGULATOR_CHANGE_STATUS,
                 .state_mem      = {
                         .disabled       = 1,
@@ -293,6 +296,7 @@ static struct regulator_init_data __initdata max8997_ldo17_data = {
                 .min_uV         = 3300000,
                 .max_uV         = 3300000,
                 .apply_uV       = 1,
+                .always_on      = 1,
                 .valid_ops_mask = REGULATOR_CHANGE_STATUS,
                 .state_mem      = {
                         .disabled       = 1,
@@ -602,6 +606,23 @@ static struct s3c_fb_platdata origen_lcd_pdata __initdata = {
         .setup_gpio     = exynos4_fimd0_gpio_setup_24bpp,
 };
 
+/* Bluetooth rfkill gpio platform data */
+struct rfkill_gpio_platform_data origen_bt_pdata = {
+        .reset_gpio     = EXYNOS4_GPX2(2),
+        .shutdown_gpio  = -1,
+        .type           = RFKILL_TYPE_BLUETOOTH,
+        .name           = "origen-bt",
+};
+
+/* Bluetooth Platform device */
+static struct platform_device origen_device_bluetooth = {
+        .name           = "rfkill_gpio",
+        .id             = -1,
+        .dev            = {
+                .platform_data  = &origen_bt_pdata,
+        },
+};
+
 static struct platform_device *origen_devices[] __initdata = {
         &s3c_device_hsmmc2,
         &s3c_device_hsmmc0,
@@ -613,9 +634,12 @@ static struct platform_device *origen_devices[] __initdata = {
         &s5p_device_fimc1,
         &s5p_device_fimc2,
         &s5p_device_fimc3,
+        &s5p_device_fimc_md,
         &s5p_device_fimd0,
+        &s5p_device_g2d,
         &s5p_device_hdmi,
         &s5p_device_i2c_hdmiphy,
+        &s5p_device_jpeg,
         &s5p_device_mfc,
         &s5p_device_mfc_l,
         &s5p_device_mfc_r,
@@ -623,6 +647,7 @@ static struct platform_device *origen_devices[] __initdata = {
         &exynos4_device_ohci,
         &origen_device_gpiokeys,
         &origen_lcd_hv070wsa,
+        &origen_device_bluetooth,
 };
 
 /* LCD Backlight data */
@@ -636,6 +661,16 @@ static struct platform_pwm_backlight_data origen_bl_data = {
         .pwm_period_ns  = 1000,
 };
 
+static void __init origen_bt_setup(void)
+{
+        gpio_request(EXYNOS4_GPA0(0), "GPIO BT_UART");
+        /* 4 UART Pins configuration */
+        s3c_gpio_cfgrange_nopull(EXYNOS4_GPA0(0), 4, S3C_GPIO_SFN(2));
+        /* Setup BT Reset, this gpio will be requesed by rfkill-gpio */
+        s3c_gpio_cfgpin(EXYNOS4_GPX2(2), S3C_GPIO_OUTPUT);
+        s3c_gpio_setpull(EXYNOS4_GPX2(2), S3C_GPIO_PULL_NONE);
+}
+
 static void s5p_tv_setup(void)
 {
         /* Direct HPD to HDMI chip */
@@ -689,6 +724,8 @@ static void __init origen_machine_init(void)
         platform_add_devices(origen_devices, ARRAY_SIZE(origen_devices));
 
         samsung_bl_set(&origen_bl_gpio_info, &origen_bl_data);
+
+        origen_bt_setup();
 }
 
 MACHINE_START(ORIGEN, "ORIGEN")
diff --git a/arch/arm/mach-exynos/mach-smdkv310.c b/arch/arm/mach-exynos/mach-smdkv310.c
index 5258b8563676..83b91fa777c1 100644
--- a/arch/arm/mach-exynos/mach-smdkv310.c
+++ b/arch/arm/mach-exynos/mach-smdkv310.c
@@ -270,6 +270,9 @@ static struct platform_device *smdkv310_devices[] __initdata = {
         &s5p_device_fimc1,
         &s5p_device_fimc2,
         &s5p_device_fimc3,
+        &s5p_device_fimc_md,
+        &s5p_device_g2d,
+        &s5p_device_jpeg,
         &exynos4_device_ac97,
         &exynos4_device_i2s0,
         &exynos4_device_ohci,
diff --git a/arch/arm/mach-exynos/mach-universal_c210.c b/arch/arm/mach-exynos/mach-universal_c210.c
index 4850700798d0..0b944eb66ebd 100644
--- a/arch/arm/mach-exynos/mach-universal_c210.c
+++ b/arch/arm/mach-exynos/mach-universal_c210.c
@@ -47,6 +47,7 @@
 #include <media/v4l2-mediabus.h>
 #include <media/s5p_fimc.h>
 #include <media/m5mols.h>
+#include <media/s5k6aa.h>
 
 #include "common.h"
 
@@ -123,8 +124,10 @@ static struct regulator_consumer_supply lp3974_buck1_consumer =
 static struct regulator_consumer_supply lp3974_buck2_consumer =
         REGULATOR_SUPPLY("vddg3d", NULL);
 
-static struct regulator_consumer_supply lp3974_buck3_consumer =
-        REGULATOR_SUPPLY("vdet", "s5p-sdo");
+static struct regulator_consumer_supply lp3974_buck3_consumer[] = {
+        REGULATOR_SUPPLY("vdet", "s5p-sdo"),
+        REGULATOR_SUPPLY("vdd_reg", "0-003c"),
+};
 
 static struct regulator_init_data lp3974_buck1_data = {
         .constraints    = {
@@ -169,8 +172,8 @@ static struct regulator_init_data lp3974_buck3_data = {
                         .enabled        = 1,
                 },
         },
-        .num_consumer_supplies = 1,
-        .consumer_supplies = &lp3974_buck3_consumer,
+        .num_consumer_supplies = ARRAY_SIZE(lp3974_buck3_consumer),
+        .consumer_supplies = lp3974_buck3_consumer,
 };
 
 static struct regulator_init_data lp3974_buck4_data = {
@@ -303,6 +306,9 @@ static struct regulator_init_data lp3974_ldo8_data = {
         .consumer_supplies = lp3974_ldo8_consumer,
 };
 
+static struct regulator_consumer_supply lp3974_ldo9_consumer =
+        REGULATOR_SUPPLY("vddio", "0-003c");
+
 static struct regulator_init_data lp3974_ldo9_data = {
         .constraints    = {
                 .name           = "VCC_2.8V",
@@ -314,6 +320,8 @@ static struct regulator_init_data lp3974_ldo9_data = {
                         .enabled        = 1,
                 },
         },
+        .num_consumer_supplies  = 1,
+        .consumer_supplies      = &lp3974_ldo9_consumer,
 };
 
 static struct regulator_init_data lp3974_ldo10_data = {
@@ -412,6 +420,7 @@ static struct regulator_init_data lp3974_ldo15_data = {
 };
 
 static struct regulator_consumer_supply lp3974_ldo16_consumer[] = {
+        REGULATOR_SUPPLY("vdda", "0-003c"),
         REGULATOR_SUPPLY("a_sensor", "0-001f"),
 };
 
@@ -819,6 +828,8 @@ static struct s3c_fb_pd_win universal_fb_win0 = {
         },
         .max_bpp        = 32,
         .default_bpp    = 16,
+        .virtual_x      = 480,
+        .virtual_y      = 2 * 800,
 };
 
 static struct s3c_fb_platdata universal_lcd_pdata __initdata = {
@@ -830,6 +841,28 @@ static struct s3c_fb_platdata universal_lcd_pdata __initdata = {
         .setup_gpio     = exynos4_fimd0_gpio_setup_24bpp,
 };
 
+static struct regulator_consumer_supply cam_vt_dio_supply =
+        REGULATOR_SUPPLY("vdd_core", "0-003c");
+
+static struct regulator_init_data cam_vt_dio_reg_init_data = {
+        .constraints = { .valid_ops_mask = REGULATOR_CHANGE_STATUS },
+        .num_consumer_supplies = 1,
+        .consumer_supplies = &cam_vt_dio_supply,
+};
+
+static struct fixed_voltage_config cam_vt_dio_fixed_voltage_cfg = {
+        .supply_name    = "CAM_VT_D_IO",
+        .microvolts     = 2800000,
+        .gpio           = EXYNOS4_GPE2(1), /* CAM_PWR_EN2 */
+        .enable_high    = 1,
+        .init_data      = &cam_vt_dio_reg_init_data,
+};
+
+static struct platform_device cam_vt_dio_fixed_reg_dev = {
+        .name = "reg-fixed-voltage", .id = FIXED_REG_ID_CAM_VT_DIO,
+        .dev = { .platform_data = &cam_vt_dio_fixed_voltage_cfg },
+};
+
 static struct regulator_consumer_supply cam_i_core_supply =
         REGULATOR_SUPPLY("core", "0-001f");
 
@@ -885,6 +918,28 @@ static struct s5p_platform_mipi_csis mipi_csis_platdata = {
 #define GPIO_CAM_LEVEL_EN(n)    EXYNOS4_GPE4(n + 3)
 #define GPIO_CAM_8M_ISP_INT     EXYNOS4_GPX1(5) /* XEINT_13 */
 #define GPIO_CAM_MEGA_nRST      EXYNOS4_GPE2(5)
+#define GPIO_CAM_VGA_NRST       EXYNOS4_GPE4(7)
+#define GPIO_CAM_VGA_NSTBY      EXYNOS4_GPE4(6)
+
+static int s5k6aa_set_power(int on)
+{
+        gpio_set_value(GPIO_CAM_LEVEL_EN(2), !!on);
+        return 0;
+}
+
+static struct s5k6aa_platform_data s5k6aa_platdata = {
+        .mclk_frequency = 21600000UL,
+        .gpio_reset     = { GPIO_CAM_VGA_NRST, 0 },
+        .gpio_stby      = { GPIO_CAM_VGA_NSTBY, 0 },
+        .bus_type       = V4L2_MBUS_PARALLEL,
+        .horiz_flip     = 1,
+        .set_power      = s5k6aa_set_power,
+};
+
+static struct i2c_board_info s5k6aa_board_info = {
+        I2C_BOARD_INFO("S5K6AA", 0x3C),
+        .platform_data = &s5k6aa_platdata,
+};
 
 static int m5mols_set_power(struct device *dev, int on)
 {
@@ -909,6 +964,14 @@ static struct s5p_fimc_isp_info universal_camera_sensors[] = {
                 .mux_id         = 0,
                 .flags          = V4L2_MBUS_PCLK_SAMPLE_FALLING |
                                   V4L2_MBUS_VSYNC_ACTIVE_LOW,
+                .bus_type       = FIMC_ITU_601,
+                .board_info     = &s5k6aa_board_info,
+                .i2c_bus_num    = 0,
+                .clk_frequency  = 24000000UL,
+        }, {
+                .mux_id         = 0,
+                .flags          = V4L2_MBUS_PCLK_SAMPLE_FALLING |
+                                  V4L2_MBUS_VSYNC_ACTIVE_LOW,
                 .bus_type       = FIMC_MIPI_CSI2,
                 .board_info     = &m5mols_board_info,
                 .i2c_bus_num    = 0,
@@ -927,9 +990,11 @@ static struct gpio universal_camera_gpios[] = {
         { GPIO_CAM_LEVEL_EN(2), GPIOF_OUT_INIT_LOW,  "CAM_LVL_EN2" },
         { GPIO_CAM_8M_ISP_INT,  GPIOF_IN,            "8M_ISP_INT"  },
         { GPIO_CAM_MEGA_nRST,   GPIOF_OUT_INIT_LOW,  "CAM_8M_NRST" },
+        { GPIO_CAM_VGA_NRST,    GPIOF_OUT_INIT_LOW,  "CAM_VGA_NRST"  },
+        { GPIO_CAM_VGA_NSTBY,   GPIOF_OUT_INIT_LOW,  "CAM_VGA_NSTBY" },
 };
 
-static void universal_camera_init(void)
+static void __init universal_camera_init(void)
 {
         s3c_set_platdata(&mipi_csis_platdata, sizeof(mipi_csis_platdata),
                          &s5p_device_mipi_csis0);
@@ -950,6 +1015,8 @@ static void universal_camera_init(void)
         /* Free GPIOs controlled directly by the sensor drivers. */
         gpio_free(GPIO_CAM_MEGA_nRST);
         gpio_free(GPIO_CAM_8M_ISP_INT);
+        gpio_free(GPIO_CAM_VGA_NRST);
+        gpio_free(GPIO_CAM_VGA_NSTBY);
 
         if (exynos4_fimc_setup_gpio(S5P_CAMPORT_A))
                 pr_err("Camera port A setup failed\n");
@@ -962,6 +1029,7 @@ static struct platform_device *universal_devices[] __initdata = {
         &s5p_device_fimc1,
         &s5p_device_fimc2,
         &s5p_device_fimc3,
+        &s5p_device_g2d,
         &mmc0_fixed_voltage,
         &s3c_device_hsmmc0,
         &s3c_device_hsmmc2,
@@ -980,9 +1048,11 @@ static struct platform_device *universal_devices[] __initdata = {
         &universal_gpio_keys,
         &s5p_device_onenand,
         &s5p_device_fimd0,
+        &s5p_device_jpeg,
         &s5p_device_mfc,
         &s5p_device_mfc_l,
         &s5p_device_mfc_r,
+        &cam_vt_dio_fixed_reg_dev,
         &cam_i_core_fixed_reg_dev,
         &cam_s_if_fixed_reg_dev,
         &s5p_device_fimc_md,
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 3919fba52ac8..37a5d715a6c2 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -314,8 +314,10 @@ config MACH_IMX27_VISSTRIM_M10
         select IMX_HAVE_PLATFORM_IMX_I2C
         select IMX_HAVE_PLATFORM_IMX_SSI
         select IMX_HAVE_PLATFORM_IMX_UART
-        select IMX_HAVE_PLATFORM_MXC_MMC
+        select IMX_HAVE_PLATFORM_MX2_CAMERA
         select IMX_HAVE_PLATFORM_MXC_EHCI
+        select IMX_HAVE_PLATFORM_MXC_MMC
+        select LEDS_GPIO_REGISTER
         help
           Include support for Visstrim_m10 platform and its different variants.
           This includes specific configurations for the board and its
@@ -486,6 +488,7 @@ config MACH_MX31MOBOARD
         bool "Support mx31moboard platforms (EPFL Mobots group)"
         select SOC_IMX31
         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+        select IMX_HAVE_PLATFORM_IMX2_WDT
         select IMX_HAVE_PLATFORM_IMX_I2C
         select IMX_HAVE_PLATFORM_IMX_UART
         select IMX_HAVE_PLATFORM_IPU_CORE
diff --git a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
index 428459fbca4b..f7b074f496f0 100644
--- a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
+++ b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
@@ -30,6 +30,10 @@
 #include <linux/input.h>
 #include <linux/gpio.h>
 #include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/leds.h>
+#include <linux/memblock.h>
+#include <media/soc_camera.h>
 #include <sound/tlv320aic32x4.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -39,6 +43,8 @@
 
 #include "devices-imx27.h"
 
+#define TVP5150_RSTN (GPIO_PORTC + 18)
+#define TVP5150_PWDN (GPIO_PORTC + 19)
 #define OTG_PHY_CS_GPIO (GPIO_PORTF + 17)
 #define SDHC1_IRQ IRQ_GPIOB(25)
 
@@ -100,8 +106,99 @@ static const int visstrim_m10_pins[] __initconst = {
         PE1_PF_USBOTG_STP,
         PB23_PF_USB_PWR,
         PB24_PF_USB_OC,
+        /* CSI */
+        PB10_PF_CSI_D0,
+        PB11_PF_CSI_D1,
+        PB12_PF_CSI_D2,
+        PB13_PF_CSI_D3,
+        PB14_PF_CSI_D4,
+        PB15_PF_CSI_MCLK,
+        PB16_PF_CSI_PIXCLK,
+        PB17_PF_CSI_D5,
+        PB18_PF_CSI_D6,
+        PB19_PF_CSI_D7,
+        PB20_PF_CSI_VSYNC,
+        PB21_PF_CSI_HSYNC,
 };
 
+/* Camera */
+static int visstrim_camera_power(struct device *dev, int on)
+{
+        gpio_set_value(TVP5150_PWDN, on);
+
+        return 0;
+};
+
+static int visstrim_camera_reset(struct device *dev)
+{
+        gpio_set_value(TVP5150_RSTN, 0);
+        ndelay(500);
+        gpio_set_value(TVP5150_RSTN, 1);
+
+        return 0;
+};
+
+static struct i2c_board_info visstrim_i2c_camera =  {
+        I2C_BOARD_INFO("tvp5150", 0x5d),
+};
+
+static struct soc_camera_link iclink_tvp5150 = {
+        .bus_id         = 0,
+        .board_info     = &visstrim_i2c_camera,
+        .i2c_adapter_id = 0,
+        .power = visstrim_camera_power,
+        .reset = visstrim_camera_reset,
+};
+
+static struct mx2_camera_platform_data visstrim_camera = {
+        .flags = MX2_CAMERA_CCIR | MX2_CAMERA_CCIR_INTERLACE |
+                        MX2_CAMERA_SWAP16 | MX2_CAMERA_PCLK_SAMPLE_RISING,
+        .clk = 100000,
+};
+
+static phys_addr_t mx2_camera_base __initdata;
+#define MX2_CAMERA_BUF_SIZE SZ_8M
+
+static void __init visstrim_camera_init(void)
+{
+        struct platform_device *pdev;
+        int dma;
+
+        /* Initialize tvp5150 gpios */
+        mxc_gpio_mode(TVP5150_RSTN | GPIO_GPIO | GPIO_OUT);
+        mxc_gpio_mode(TVP5150_PWDN | GPIO_GPIO | GPIO_OUT);
+        gpio_set_value(TVP5150_RSTN, 1);
+        gpio_set_value(TVP5150_PWDN, 0);
+        ndelay(1);
+
+        gpio_set_value(TVP5150_PWDN, 1);
+        ndelay(1);
+        gpio_set_value(TVP5150_RSTN, 0);
+        ndelay(500);
+        gpio_set_value(TVP5150_RSTN, 1);
+        ndelay(200000);
+
+        pdev = imx27_add_mx2_camera(&visstrim_camera);
+        if (IS_ERR(pdev))
+                return;
+
+        dma = dma_declare_coherent_memory(&pdev->dev,
+                                mx2_camera_base, mx2_camera_base,
+                                MX2_CAMERA_BUF_SIZE,
+                                DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE);
+        if (!(dma & DMA_MEMORY_MAP))
+                return;
+}
+
+static void __init visstrim_reserve(void)
+{
+        /* reserve 4 MiB for mx2-camera */
+        mx2_camera_base = memblock_alloc(MX2_CAMERA_BUF_SIZE,
+                        MX2_CAMERA_BUF_SIZE);
+        memblock_free(mx2_camera_base, MX2_CAMERA_BUF_SIZE);
+        memblock_remove(mx2_camera_base, MX2_CAMERA_BUF_SIZE);
+}
+
 /* GPIOs used as events for applications */
 static struct gpio_keys_button visstrim_gpio_keys[] = {
         {
@@ -136,6 +233,35 @@ static const struct gpio_keys_platform_data
         .nbuttons       = ARRAY_SIZE(visstrim_gpio_keys),
 };
 
+/* led */
+static const struct gpio_led visstrim_m10_leds[] __initconst = {
+        {
+                .name = "visstrim:ld0",
+                .default_trigger = "nand-disk",
+                .gpio = (GPIO_PORTC + 29),
+        },
+        {
+                .name = "visstrim:ld1",
+                .default_trigger = "nand-disk",
+                .gpio = (GPIO_PORTC + 24),
+        },
+        {
+                .name = "visstrim:ld2",
+                .default_trigger = "nand-disk",
+                .gpio = (GPIO_PORTC + 28),
+        },
+        {
+                .name = "visstrim:ld3",
+                .default_trigger = "nand-disk",
+                .gpio = (GPIO_PORTC + 25),
+        },
+};
+
+static const struct gpio_led_platform_data visstrim_m10_led_data __initconst = {
+        .leds = visstrim_m10_leds,
+        .num_leds = ARRAY_SIZE(visstrim_m10_leds),
+};
+
 /* Visstrim_SM10 has a microSD slot connected to sdhc1 */
 static int visstrim_m10_sdhc1_init(struct device *dev,
                 irq_handler_t detect_irq, void *data)
@@ -216,6 +342,9 @@ static struct i2c_board_info visstrim_m10_i2c_devices[] = {
         {
                 I2C_BOARD_INFO("tlv320aic32x4", 0x18),
                 .platform_data = &visstrim_m10_aic32x4_pdata,
+        },
+        {
+                 I2C_BOARD_INFO("m41t00", 0x68),
         }
 };
 
@@ -254,16 +383,21 @@ static void __init visstrim_m10_board_init(void)
         imx27_add_imx_ssi(0, &visstrim_m10_ssi_pdata);
         imx27_add_imx_uart0(&uart_pdata);
 
-        i2c_register_board_info(0, visstrim_m10_i2c_devices,
-                                ARRAY_SIZE(visstrim_m10_i2c_devices));
         imx27_add_imx_i2c(0, &visstrim_m10_i2c_data);
         imx27_add_imx_i2c(1, &visstrim_m10_i2c_data);
+        i2c_register_board_info(0, visstrim_m10_i2c_devices,
+                                ARRAY_SIZE(visstrim_m10_i2c_devices));
+
         imx27_add_mxc_mmc(0, &visstrim_m10_sdhc_pdata);
         imx27_add_mxc_ehci_otg(&visstrim_m10_usbotg_pdata);
         imx27_add_fec(NULL);
         imx_add_gpio_keys(&visstrim_gpio_keys_platform_data);
         platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
         imx_add_platform_device("mx27vis", 0, NULL, 0, NULL, 0);
+        platform_device_register_resndata(NULL, "soc-camera-pdrv", 0, NULL, 0,
+                                      &iclink_tvp5150, sizeof(iclink_tvp5150));
+        gpio_led_register_device(0, &visstrim_m10_led_data);
+        visstrim_camera_init();
 }
 
 static void __init visstrim_m10_timer_init(void)
@@ -277,6 +411,7 @@ static struct sys_timer visstrim_m10_timer = {
 
 MACHINE_START(IMX27_VISSTRIM_M10, "Vista Silicon Visstrim_M10")
         .atag_offset = 0x100,
+        .reserve = visstrim_reserve,
         .map_io = mx27_map_io,
         .init_early = imx27_init_early,
         .init_irq = mx27_init_irq,
diff --git a/arch/arm/mach-imx/mach-mx31moboard.c b/arch/arm/mach-imx/mach-mx31moboard.c
index f225262b5c38..c0511fb1a5f9 100644
--- a/arch/arm/mach-imx/mach-mx31moboard.c
+++ b/arch/arm/mach-imx/mach-mx31moboard.c
@@ -530,6 +530,8 @@ static void __init mx31moboard_init(void)
         platform_add_devices(devices, ARRAY_SIZE(devices));
         gpio_led_register_device(-1, &mx31moboard_led_pdata);
 
+        imx31_add_imx2_wdt(NULL);
+
         imx31_add_imx_uart0(&uart0_pdata);
         imx31_add_imx_uart4(&uart4_pdata);
 
@@ -590,7 +592,7 @@ static void __init mx31moboard_reserve(void)
 }
 
 MACHINE_START(MX31MOBOARD, "EPFL Mobots mx31moboard")
-        /* Maintainer: Valentin Longchamp, EPFL Mobots group */
+        /* Maintainer: Philippe Retornaz, EPFL Mobots group */
         .atag_offset = 0x100,
         .reserve = mx31moboard_reserve,
         .map_io = mx31_map_io,
diff --git a/arch/arm/mach-imx/mach-mx35_3ds.c b/arch/arm/mach-imx/mach-mx35_3ds.c
index 0af6c9c5b3fd..e14291d89e4f 100644
--- a/arch/arm/mach-imx/mach-mx35_3ds.c
+++ b/arch/arm/mach-imx/mach-mx35_3ds.c
@@ -4,6 +4,11 @@
  *
  * Author: Fabio Estevam <fabio.estevam@freescale.com>
  *
+ * Copyright (C) 2011 Meprolight, Ltd.
+ * Alex Gershgorin <alexg@meprolight.com>
+ *
+ * Modified from i.MX31 3-Stack Development System
+ *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
@@ -34,15 +39,102 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 #include <asm/mach/map.h>
+#include <asm/memblock.h>
 
 #include <mach/hardware.h>
 #include <mach/common.h>
 #include <mach/iomux-mx35.h>
 #include <mach/irqs.h>
 #include <mach/3ds_debugboard.h>
+#include <video/platform_lcd.h>
+
+#include <media/soc_camera.h>
 
 #include "devices-imx35.h"
 
+#define GPIO_MC9S08DZ60_GPS_ENABLE 0
+#define GPIO_MC9S08DZ60_HDD_ENABLE 4
+#define GPIO_MC9S08DZ60_WIFI_ENABLE 5
+#define GPIO_MC9S08DZ60_LCD_ENABLE 6
+#define GPIO_MC9S08DZ60_SPEAKER_ENABLE 8
+
+static const struct fb_videomode fb_modedb[] = {
+        {
+                 /* 800x480 @ 55 Hz */
+                .name = "Ceramate-CLAA070VC01",
+                .refresh = 55,
+                .xres = 800,
+                .yres = 480,
+                .pixclock = 40000,
+                .left_margin = 40,
+                .right_margin = 40,
+                .upper_margin = 5,
+                .lower_margin = 5,
+                .hsync_len = 20,
+                .vsync_len = 10,
+                .sync = FB_SYNC_OE_ACT_HIGH,
+                .vmode = FB_VMODE_NONINTERLACED,
+                .flag = 0,
+         },
+};
+
+static const struct ipu_platform_data mx3_ipu_data __initconst = {
+        .irq_base = MXC_IPU_IRQ_START,
+};
+
+static struct mx3fb_platform_data mx3fb_pdata __initdata = {
+        .name = "Ceramate-CLAA070VC01",
+        .mode = fb_modedb,
+        .num_modes = ARRAY_SIZE(fb_modedb),
+};
+
+static struct i2c_board_info __initdata i2c_devices_3ds[] = {
+        {
+                I2C_BOARD_INFO("mc9s08dz60", 0x69),
+        },
+};
+
+static int lcd_power_gpio = -ENXIO;
+
+static int mc9s08dz60_gpiochip_match(struct gpio_chip *chip,
+                                                     void *data)
+{
+        return !strcmp(chip->label, data);
+}
+
+static void mx35_3ds_lcd_set_power(
+                                struct plat_lcd_data *pd, unsigned int power)
+{
+        struct gpio_chip *chip;
+
+        if (!gpio_is_valid(lcd_power_gpio)) {
+                chip = gpiochip_find(
+                                "mc9s08dz60", mc9s08dz60_gpiochip_match);
+                if (chip) {
+                        lcd_power_gpio =
+                                chip->base + GPIO_MC9S08DZ60_LCD_ENABLE;
+                        if (gpio_request(lcd_power_gpio, "lcd_power") < 0) {
+                                pr_err("error: gpio already requested!\n");
+                                lcd_power_gpio = -ENXIO;
+                        }
+                } else {
+                        pr_err("error: didn't find mc9s08dz60 gpio chip\n");
+                }
+        }
+
+        if (gpio_is_valid(lcd_power_gpio))
+                gpio_set_value_cansleep(lcd_power_gpio, power);
+}
+
+static struct plat_lcd_data mx35_3ds_lcd_data = {
+        .set_power = mx35_3ds_lcd_set_power,
+};
+
+static struct platform_device mx35_3ds_lcd = {
+        .name = "platform-lcd",
+        .dev.platform_data = &mx35_3ds_lcd_data,
+};
+
 #define EXPIO_PARENT_INT        gpio_to_irq(IMX_GPIO_NR(1, 1))
 
 static const struct imxuart_platform_data uart_pdata __initconst = {
@@ -120,6 +212,109 @@ static iomux_v3_cfg_t mx35pdk_pads[] = {
         /* I2C1 */
         MX35_PAD_I2C1_CLK__I2C1_SCL,
         MX35_PAD_I2C1_DAT__I2C1_SDA,
+        /* Display */
+        MX35_PAD_LD0__IPU_DISPB_DAT_0,
+        MX35_PAD_LD1__IPU_DISPB_DAT_1,
+        MX35_PAD_LD2__IPU_DISPB_DAT_2,
+        MX35_PAD_LD3__IPU_DISPB_DAT_3,
+        MX35_PAD_LD4__IPU_DISPB_DAT_4,
+        MX35_PAD_LD5__IPU_DISPB_DAT_5,
+        MX35_PAD_LD6__IPU_DISPB_DAT_6,
+        MX35_PAD_LD7__IPU_DISPB_DAT_7,
+        MX35_PAD_LD8__IPU_DISPB_DAT_8,
+        MX35_PAD_LD9__IPU_DISPB_DAT_9,
+        MX35_PAD_LD10__IPU_DISPB_DAT_10,
+        MX35_PAD_LD11__IPU_DISPB_DAT_11,
+        MX35_PAD_LD12__IPU_DISPB_DAT_12,
+        MX35_PAD_LD13__IPU_DISPB_DAT_13,
+        MX35_PAD_LD14__IPU_DISPB_DAT_14,
+        MX35_PAD_LD15__IPU_DISPB_DAT_15,
+        MX35_PAD_LD16__IPU_DISPB_DAT_16,
+        MX35_PAD_LD17__IPU_DISPB_DAT_17,
+        MX35_PAD_D3_HSYNC__IPU_DISPB_D3_HSYNC,
+        MX35_PAD_D3_FPSHIFT__IPU_DISPB_D3_CLK,
+        MX35_PAD_D3_DRDY__IPU_DISPB_D3_DRDY,
+        MX35_PAD_CONTRAST__IPU_DISPB_CONTR,
+        MX35_PAD_D3_VSYNC__IPU_DISPB_D3_VSYNC,
+        MX35_PAD_D3_REV__IPU_DISPB_D3_REV,
+        MX35_PAD_D3_CLS__IPU_DISPB_D3_CLS,
+        /* CSI */
+        MX35_PAD_TX1__IPU_CSI_D_6,
+        MX35_PAD_TX0__IPU_CSI_D_7,
+        MX35_PAD_CSI_D8__IPU_CSI_D_8,
+        MX35_PAD_CSI_D9__IPU_CSI_D_9,
+        MX35_PAD_CSI_D10__IPU_CSI_D_10,
+        MX35_PAD_CSI_D11__IPU_CSI_D_11,
+        MX35_PAD_CSI_D12__IPU_CSI_D_12,
+        MX35_PAD_CSI_D13__IPU_CSI_D_13,
+        MX35_PAD_CSI_D14__IPU_CSI_D_14,
+        MX35_PAD_CSI_D15__IPU_CSI_D_15,
+        MX35_PAD_CSI_HSYNC__IPU_CSI_HSYNC,
+        MX35_PAD_CSI_MCLK__IPU_CSI_MCLK,
+        MX35_PAD_CSI_PIXCLK__IPU_CSI_PIXCLK,
+        MX35_PAD_CSI_VSYNC__IPU_CSI_VSYNC,
+};
+
+/*
+ * Camera support
+*/
+static phys_addr_t mx3_camera_base __initdata;
+#define MX35_3DS_CAMERA_BUF_SIZE SZ_8M
+
+static const struct mx3_camera_pdata mx35_3ds_camera_pdata __initconst = {
+        .flags = MX3_CAMERA_DATAWIDTH_8,
+        .mclk_10khz = 2000,
+};
+
+static int __init imx35_3ds_init_camera(void)
+{
+        int dma, ret = -ENOMEM;
+        struct platform_device *pdev =
+                imx35_alloc_mx3_camera(&mx35_3ds_camera_pdata);
+
+        if (IS_ERR(pdev))
+                return PTR_ERR(pdev);
+
+        if (!mx3_camera_base)
+                goto err;
+
+        dma = dma_declare_coherent_memory(&pdev->dev,
+                                        mx3_camera_base, mx3_camera_base,
+                                        MX35_3DS_CAMERA_BUF_SIZE,
+                                        DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE);
+
+        if (!(dma & DMA_MEMORY_MAP))
+                goto err;
+
+        ret = platform_device_add(pdev);
+        if (ret)
+err:
+                platform_device_put(pdev);
+
+        return ret;
+}
+
+static const struct ipu_platform_data mx35_3ds_ipu_data __initconst = {
+        .irq_base = MXC_IPU_IRQ_START,
+};
+
+static struct i2c_board_info mx35_3ds_i2c_camera = {
+        I2C_BOARD_INFO("ov2640", 0x30),
+};
+
+static struct soc_camera_link iclink_ov2640 = {
+        .bus_id         = 0,
+        .board_info     = &mx35_3ds_i2c_camera,
+        .i2c_adapter_id = 0,
+        .power          = NULL,
+};
+
+static struct platform_device mx35_3ds_ov2640 = {
+        .name   = "soc-camera-pdrv",
+        .id     = 0,
+        .dev    = {
+                .platform_data = &iclink_ov2640,
+        },
 };
 
 static int mx35_3ds_otg_init(struct platform_device *pdev)
@@ -179,6 +374,8 @@ static const struct imxi2c_platform_data mx35_3ds_i2c0_data __initconst = {
  */
 static void __init mx35_3ds_init(void)
 {
+        struct platform_device *imx35_fb_pdev;
+
         imx35_soc_init();
 
         mxc_iomux_v3_setup_multiple_pads(mx35pdk_pads, ARRAY_SIZE(mx35pdk_pads));
@@ -204,6 +401,17 @@ static void __init mx35_3ds_init(void)
                 pr_warn("Init of the debugboard failed, all "
                                 "devices on the debugboard are unusable.\n");
         imx35_add_imx_i2c0(&mx35_3ds_i2c0_data);
+
+        i2c_register_board_info(
+                0, i2c_devices_3ds, ARRAY_SIZE(i2c_devices_3ds));
+
+        imx35_add_ipu_core(&mx35_3ds_ipu_data);
+        platform_device_register(&mx35_3ds_ov2640);
+        imx35_3ds_init_camera();
+
+        imx35_fb_pdev = imx35_add_mx3_sdc_fb(&mx3fb_pdata);
+        mx35_3ds_lcd.dev.parent = &imx35_fb_pdev->dev;
+        platform_device_register(&mx35_3ds_lcd);
 }
 
 static void __init mx35pdk_timer_init(void)
@@ -215,6 +423,13 @@ struct sys_timer mx35pdk_timer = {
         .init   = mx35pdk_timer_init,
 };
 
+static void __init mx35_3ds_reserve(void)
+{
+        /* reserve MX35_3DS_CAMERA_BUF_SIZE bytes for mx3-camera */
+        mx3_camera_base = arm_memblock_steal(MX35_3DS_CAMERA_BUF_SIZE,
+                                         MX35_3DS_CAMERA_BUF_SIZE);
+}
+
 MACHINE_START(MX35_3DS, "Freescale MX35PDK")
         /* Maintainer: Freescale Semiconductor, Inc */
         .atag_offset = 0x100,
@@ -224,5 +439,6 @@ MACHINE_START(MX35_3DS, "Freescale MX35PDK")
         .handle_irq = imx35_handle_irq,
         .timer = &mx35pdk_timer,
         .init_machine = mx35_3ds_init,
+        .reserve = mx35_3ds_reserve,
         .restart        = mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig
index 7fc603b46891..90ceab761929 100644
--- a/arch/arm/mach-kirkwood/Kconfig
+++ b/arch/arm/mach-kirkwood/Kconfig
@@ -44,6 +44,20 @@ config MACH_GURUPLUG
           Say 'Y' here if you want your kernel to support the
           Marvell GuruPlug Reference Board.
 
+config ARCH_KIRKWOOD_DT
+        bool "Marvell Kirkwood Flattened Device Tree"
+        select USE_OF
+        help
+          Say 'Y' here if you want your kernel to support the
+          Marvell Kirkwood using flattened device tree.
+
+config MACH_DREAMPLUG_DT
+        bool "Marvell DreamPlug (Flattened Device Tree)"
+        select ARCH_KIRKWOOD_DT
+        help
+          Say 'Y' here if you want your kernel to support the
+          Marvell DreamPlug (Flattened Device Tree).
+
 config MACH_TS219
         bool "QNAP TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and TS-219P+ Turbo NAS"
         help
diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile
index 5dcaa81a2ec3..acbc5e1db06f 100644
--- a/arch/arm/mach-kirkwood/Makefile
+++ b/arch/arm/mach-kirkwood/Makefile
@@ -20,3 +20,4 @@ obj-$(CONFIG_MACH_NET5BIG_V2)		+= netxbig_v2-setup.o lacie_v2-common.o
 obj-$(CONFIG_MACH_T5325)                += t5325-setup.o
 
 obj-$(CONFIG_CPU_IDLE)                  += cpuidle.o
+obj-$(CONFIG_ARCH_KIRKWOOD_DT)          += board-dt.o
diff --git a/arch/arm/mach-kirkwood/Makefile.boot b/arch/arm/mach-kirkwood/Makefile.boot
index 760a0efe7580..16f938522304 100644
--- a/arch/arm/mach-kirkwood/Makefile.boot
+++ b/arch/arm/mach-kirkwood/Makefile.boot
@@ -1,3 +1,5 @@
    zreladdr-y   += 0x00008000
 params_phys-y   := 0x00000100
 initrd_phys-y   := 0x00800000
+
+dtb-$(CONFIG_MACH_DREAMPLUG_DT) += kirkwood-dreamplug.dtb
diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c
new file mode 100644
index 000000000000..fbe6405602ed
--- /dev/null
+++ b/arch/arm/mach-kirkwood/board-dt.c
@@ -0,0 +1,180 @@
+/*
+ * Copyright 2012 (C), Jason Cooper <jason@lakedaemon.net>
+ *
+ * arch/arm/mach-kirkwood/board-dt.c
+ *
+ * Marvell DreamPlug Reference Board Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/partitions.h>
+#include <linux/ata_platform.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_fdt.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
+#include <linux/mtd/physmap.h>
+#include <linux/spi/flash.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/orion_spi.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/kirkwood.h>
+#include <plat/mvsdio.h>
+#include "common.h"
+#include "mpp.h"
+
+static struct of_device_id kirkwood_dt_match_table[] __initdata = {
+        { .compatible = "simple-bus", },
+        { }
+};
+
+struct mtd_partition dreamplug_partitions[] = {
+        {
+                .name   = "u-boot",
+                .size   = SZ_512K,
+                .offset = 0,
+        },
+        {
+                .name   = "u-boot env",
+                .size   = SZ_64K,
+                .offset = SZ_512K + SZ_512K,
+        },
+        {
+                .name   = "dtb",
+                .size   = SZ_64K,
+                .offset = SZ_512K + SZ_512K + SZ_512K,
+        },
+};
+
+static const struct flash_platform_data dreamplug_spi_slave_data = {
+        .type           = "mx25l1606e",
+        .name           = "spi_flash",
+        .parts          = dreamplug_partitions,
+        .nr_parts       = ARRAY_SIZE(dreamplug_partitions),
+};
+
+static struct spi_board_info __initdata dreamplug_spi_slave_info[] = {
+        {
+                .modalias       = "m25p80",
+                .platform_data  = &dreamplug_spi_slave_data,
+                .irq            = -1,
+                .max_speed_hz   = 50000000,
+                .bus_num        = 0,
+                .chip_select    = 0,
+        },
+};
+
+static struct mv643xx_eth_platform_data dreamplug_ge00_data = {
+        .phy_addr       = MV643XX_ETH_PHY_ADDR(0),
+};
+
+static struct mv643xx_eth_platform_data dreamplug_ge01_data = {
+        .phy_addr       = MV643XX_ETH_PHY_ADDR(1),
+};
+
+static struct mv_sata_platform_data dreamplug_sata_data = {
+        .n_ports        = 1,
+};
+
+static struct mvsdio_platform_data dreamplug_mvsdio_data = {
+        /* unfortunately the CD signal has not been connected */
+};
+
+static struct gpio_led dreamplug_led_pins[] = {
+        {
+                .name                   = "dreamplug:blue:bluetooth",
+                .gpio                   = 47,
+                .active_low             = 1,
+        },
+        {
+                .name                   = "dreamplug:green:wifi",
+                .gpio                   = 48,
+                .active_low             = 1,
+        },
+        {
+                .name                   = "dreamplug:green:wifi_ap",
+                .gpio                   = 49,
+                .active_low             = 1,
+        },
+};
+
+static struct gpio_led_platform_data dreamplug_led_data = {
+        .leds           = dreamplug_led_pins,
+        .num_leds       = ARRAY_SIZE(dreamplug_led_pins),
+};
+
+static struct platform_device dreamplug_leds = {
+        .name   = "leds-gpio",
+        .id     = -1,
+        .dev    = {
+                .platform_data  = &dreamplug_led_data,
+        }
+};
+
+static unsigned int dreamplug_mpp_config[] __initdata = {
+        MPP0_SPI_SCn,
+        MPP1_SPI_MOSI,
+        MPP2_SPI_SCK,
+        MPP3_SPI_MISO,
+        MPP47_GPIO,     /* Bluetooth LED */
+        MPP48_GPIO,     /* Wifi LED */
+        MPP49_GPIO,     /* Wifi AP LED */
+        0
+};
+
+static void __init dreamplug_init(void)
+{
+        /*
+         * Basic setup. Needs to be called early.
+         */
+        kirkwood_mpp_conf(dreamplug_mpp_config);
+
+        spi_register_board_info(dreamplug_spi_slave_info,
+                                ARRAY_SIZE(dreamplug_spi_slave_info));
+        kirkwood_spi_init();
+
+        kirkwood_ehci_init();
+        kirkwood_ge00_init(&dreamplug_ge00_data);
+        kirkwood_ge01_init(&dreamplug_ge01_data);
+        kirkwood_sata_init(&dreamplug_sata_data);
+        kirkwood_sdio_init(&dreamplug_mvsdio_data);
+
+        platform_device_register(&dreamplug_leds);
+}
+
+static void __init kirkwood_dt_init(void)
+{
+        kirkwood_init();
+
+        if (of_machine_is_compatible("globalscale,dreamplug"))
+                dreamplug_init();
+
+        of_platform_populate(NULL, kirkwood_dt_match_table, NULL, NULL);
+}
+
+static const char *kirkwood_dt_board_compat[] = {
+        "globalscale,dreamplug",
+        NULL
+};
+
+DT_MACHINE_START(KIRKWOOD_DT, "Marvell Kirkwood (Flattened Device Tree)")
+        /* Maintainer: Jason Cooper <jason@lakedaemon.net> */
+        .map_io         = kirkwood_map_io,
+        .init_early     = kirkwood_init_early,
+        .init_irq       = kirkwood_init_irq,
+        .timer          = &kirkwood_timer,
+        .init_machine   = kirkwood_dt_init,
+        .restart        = kirkwood_restart,
+        .dt_compat      = kirkwood_dt_board_compat,
+MACHINE_END
diff --git a/arch/arm/mach-mmp/mmp2.c b/arch/arm/mach-mmp/mmp2.c
index 617c60a170a4..c709a24a9d25 100644
--- a/arch/arm/mach-mmp/mmp2.c
+++ b/arch/arm/mach-mmp/mmp2.c
@@ -223,6 +223,7 @@ struct resource mmp2_resource_gpio[] = {
         }, {
                 .start  = IRQ_MMP2_GPIO,
                 .end    = IRQ_MMP2_GPIO,
+                .name   = "gpio_mux",
                 .flags  = IORESOURCE_IRQ,
         },
 };
diff --git a/arch/arm/mach-mmp/pxa168.c b/arch/arm/mach-mmp/pxa168.c
index ada1213982b4..f10f87d8b667 100644
--- a/arch/arm/mach-mmp/pxa168.c
+++ b/arch/arm/mach-mmp/pxa168.c
@@ -166,6 +166,7 @@ struct resource pxa168_resource_gpio[] = {
         }, {
                 .start  = IRQ_PXA168_GPIOX,
                 .end    = IRQ_PXA168_GPIOX,
+                .name   = "gpio_mux",
                 .flags  = IORESOURCE_IRQ,
         },
 };
diff --git a/arch/arm/mach-mmp/pxa910.c b/arch/arm/mach-mmp/pxa910.c
index 3241a25784d0..0c87e69adf9f 100644
--- a/arch/arm/mach-mmp/pxa910.c
+++ b/arch/arm/mach-mmp/pxa910.c
@@ -173,6 +173,7 @@ struct resource pxa910_resource_gpio[] = {
         }, {
                 .start  = IRQ_PXA910_AP_GPIO,
                 .end    = IRQ_PXA910_AP_GPIO,
+                .name   = "gpio_mux",
                 .flags  = IORESOURCE_IRQ,
         },
 };
diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig
index cf00b3e3be85..c57f9964a713 100644
--- a/arch/arm/mach-mxs/Kconfig
+++ b/arch/arm/mach-mxs/Kconfig
@@ -83,6 +83,18 @@ config MODULE_M28
         select MXS_HAVE_PLATFORM_MXSFB
         select MXS_OCOTP
 
+config MODULE_APX4
+        bool
+        select SOC_IMX28
+        select LEDS_GPIO_REGISTER
+        select MXS_HAVE_AMBA_DUART
+        select MXS_HAVE_PLATFORM_AUART
+        select MXS_HAVE_PLATFORM_FEC
+        select MXS_HAVE_PLATFORM_MXS_I2C
+        select MXS_HAVE_PLATFORM_MXS_MMC
+        select MXS_HAVE_PLATFORM_MXS_SAIF
+        select MXS_OCOTP
+
 config MACH_TX28
         bool "Ka-Ro TX28 module"
         select MODULE_TX28
@@ -91,4 +103,8 @@ config MACH_M28EVK
         bool "Support DENX M28EVK Platform"
         select MODULE_M28
 
+config MACH_APX4DEVKIT
+        bool "Support Bluegiga APX4 Development Kit"
+        select MODULE_APX4
+
 endif
diff --git a/arch/arm/mach-mxs/Makefile b/arch/arm/mach-mxs/Makefile
index 8c93b24896bf..908bf9a567f1 100644
--- a/arch/arm/mach-mxs/Makefile
+++ b/arch/arm/mach-mxs/Makefile
@@ -11,6 +11,7 @@ obj-$(CONFIG_MACH_STMP378X_DEVB) += mach-stmp378x_devb.o
 obj-$(CONFIG_MACH_MX23EVK) += mach-mx23evk.o
 obj-$(CONFIG_MACH_MX28EVK) += mach-mx28evk.o
 obj-$(CONFIG_MACH_M28EVK)    += mach-m28evk.o
+obj-$(CONFIG_MACH_APX4DEVKIT) += mach-apx4devkit.o
 obj-$(CONFIG_MODULE_TX28) += module-tx28.o
 obj-$(CONFIG_MACH_TX28)    += mach-tx28.o
 
diff --git a/arch/arm/mach-mxs/include/mach/digctl.h b/arch/arm/mach-mxs/include/mach/digctl.h
index 49a888c65d6d..17964066303f 100644
--- a/arch/arm/mach-mxs/include/mach/digctl.h
+++ b/arch/arm/mach-mxs/include/mach/digctl.h
@@ -18,4 +18,5 @@
 #define HW_DIGCTL_CTRL                  0x0
 #define  BP_DIGCTL_CTRL_SAIF_CLKMUX     10
 #define  BM_DIGCTL_CTRL_SAIF_CLKMUX     (0x3 << 10)
+#define HW_DIGCTL_CHIPID                0x310
 #endif
diff --git a/arch/arm/mach-mxs/include/mach/mxs.h b/arch/arm/mach-mxs/include/mach/mxs.h
index bde5f6634747..7d4fb6d0afda 100644
--- a/arch/arm/mach-mxs/include/mach/mxs.h
+++ b/arch/arm/mach-mxs/include/mach/mxs.h
@@ -23,22 +23,10 @@
 #include <linux/io.h>
 #endif
 #include <asm/mach-types.h>
+#include <mach/digctl.h>
 #include <mach/hardware.h>
 
 /*
- * MXS CPU types
- */
-#define cpu_is_mx23()           (                                       \
-                machine_is_mx23evk() ||                                 \
-                machine_is_stmp378x() ||                                \
-                0)
-#define cpu_is_mx28()           (                                       \
-                machine_is_mx28evk() ||                                 \
-                machine_is_m28evk() ||                                  \
-                machine_is_tx28() ||                                    \
-                0)
-
-/*
  * IO addresses common to MXS-based
  */
 #define MXS_IO_BASE_ADDR                0x80000000
@@ -109,6 +97,21 @@ static inline void __mxs_togl(u32 mask, void __iomem *reg)
 {
         __raw_writel(mask, reg + MXS_TOG_ADDR);
 }
+
+/*
+ * MXS CPU types
+ */
+#define MXS_CHIPID (MXS_IO_ADDRESS(MXS_DIGCTL_BASE_ADDR) + HW_DIGCTL_CHIPID)
+
+static inline int cpu_is_mx23(void)
+{
+        return ((__raw_readl(MXS_CHIPID) >> 16) == 0x3780);
+}
+
+static inline int cpu_is_mx28(void)
+{
+        return ((__raw_readl(MXS_CHIPID) >> 16) == 0x2800);
+}
 #endif
 
 #endif /* __MACH_MXS_H__ */
diff --git a/arch/arm/mach-mxs/include/mach/uncompress.h b/arch/arm/mach-mxs/include/mach/uncompress.h
index 67776746f143..ef2811495446 100644
--- a/arch/arm/mach-mxs/include/mach/uncompress.h
+++ b/arch/arm/mach-mxs/include/mach/uncompress.h
@@ -18,8 +18,6 @@
 #ifndef __MACH_MXS_UNCOMPRESS_H__
 #define __MACH_MXS_UNCOMPRESS_H__
 
-#include <asm/mach-types.h>
-
 unsigned long mxs_duart_base;
 
 #define MXS_DUART(x)    (*(volatile unsigned long *)(mxs_duart_base + (x)))
@@ -55,16 +53,17 @@ static inline void flush(void)
 
 #define MX23_DUART_BASE_ADDR    0x80070000
 #define MX28_DUART_BASE_ADDR    0x80074000
+#define MXS_DIGCTL_CHIPID       0x8001c310
 
 static inline void __arch_decomp_setup(unsigned long arch_id)
 {
-        switch (arch_id) {
-        case MACH_TYPE_MX23EVK:
+        u16 chipid = (*(volatile unsigned long *) MXS_DIGCTL_CHIPID) >> 16;
+
+        switch (chipid) {
+        case 0x3780:
                 mxs_duart_base = MX23_DUART_BASE_ADDR;
                 break;
-        case MACH_TYPE_MX28EVK:
-        case MACH_TYPE_M28EVK:
-        case MACH_TYPE_TX28:
+        case 0x2800:
                 mxs_duart_base = MX28_DUART_BASE_ADDR;
                 break;
         default:
diff --git a/arch/arm/mach-mxs/mach-apx4devkit.c b/arch/arm/mach-mxs/mach-apx4devkit.c
new file mode 100644
index 000000000000..48a7fab571a6
--- /dev/null
+++ b/arch/arm/mach-mxs/mach-apx4devkit.c
@@ -0,0 +1,260 @@
+/*
+ * Copyright (C) 2011-2012
+ * Lauri Hintsala, Bluegiga, <lauri.hintsala@bluegiga.com>
+ * Veli-Pekka Peltola, Bluegiga, <veli-pekka.peltola@bluegiga.com>
+ *
+ * based on: mach-mx28evk.c
+ * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
+#include <linux/clk.h>
+#include <linux/i2c.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/fixed.h>
+#include <linux/micrel_phy.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+
+#include <mach/common.h>
+#include <mach/digctl.h>
+#include <mach/iomux-mx28.h>
+
+#include "devices-mx28.h"
+
+#define APX4DEVKIT_GPIO_USERLED MXS_GPIO_NR(3, 28)
+
+static const iomux_cfg_t apx4devkit_pads[] __initconst = {
+        /* duart */
+        MX28_PAD_PWM0__DUART_RX | MXS_PAD_CTRL,
+        MX28_PAD_PWM1__DUART_TX | MXS_PAD_CTRL,
+
+        /* auart0 */
+        MX28_PAD_AUART0_RX__AUART0_RX | MXS_PAD_CTRL,
+        MX28_PAD_AUART0_TX__AUART0_TX | MXS_PAD_CTRL,
+        MX28_PAD_AUART0_CTS__AUART0_CTS | MXS_PAD_CTRL,
+        MX28_PAD_AUART0_RTS__AUART0_RTS | MXS_PAD_CTRL,
+
+        /* auart1 */
+        MX28_PAD_AUART1_RX__AUART1_RX | MXS_PAD_CTRL,
+        MX28_PAD_AUART1_TX__AUART1_TX | MXS_PAD_CTRL,
+
+        /* auart2 */
+        MX28_PAD_SSP2_SCK__AUART2_RX | MXS_PAD_CTRL,
+        MX28_PAD_SSP2_MOSI__AUART2_TX | MXS_PAD_CTRL,
+
+        /* auart3 */
+        MX28_PAD_SSP2_MISO__AUART3_RX | MXS_PAD_CTRL,
+        MX28_PAD_SSP2_SS0__AUART3_TX | MXS_PAD_CTRL,
+
+#define MXS_PAD_FEC     (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP)
+        /* fec0 */
+        MX28_PAD_ENET0_MDC__ENET0_MDC | MXS_PAD_FEC,
+        MX28_PAD_ENET0_MDIO__ENET0_MDIO | MXS_PAD_FEC,
+        MX28_PAD_ENET0_RX_EN__ENET0_RX_EN | MXS_PAD_FEC,
+        MX28_PAD_ENET0_RXD0__ENET0_RXD0 | MXS_PAD_FEC,
+        MX28_PAD_ENET0_RXD1__ENET0_RXD1 | MXS_PAD_FEC,
+        MX28_PAD_ENET0_TX_EN__ENET0_TX_EN | MXS_PAD_FEC,
+        MX28_PAD_ENET0_TXD0__ENET0_TXD0 | MXS_PAD_FEC,
+        MX28_PAD_ENET0_TXD1__ENET0_TXD1 | MXS_PAD_FEC,
+        MX28_PAD_ENET_CLK__CLKCTRL_ENET | MXS_PAD_FEC,
+
+        /* i2c */
+        MX28_PAD_I2C0_SCL__I2C0_SCL,
+        MX28_PAD_I2C0_SDA__I2C0_SDA,
+
+        /* mmc0 */
+        MX28_PAD_SSP0_DATA0__SSP0_D0 |
+                (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+        MX28_PAD_SSP0_DATA1__SSP0_D1 |
+                (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+        MX28_PAD_SSP0_DATA2__SSP0_D2 |
+                (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+        MX28_PAD_SSP0_DATA3__SSP0_D3 |
+                (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+        MX28_PAD_SSP0_DATA4__SSP0_D4 |
+                (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+        MX28_PAD_SSP0_DATA5__SSP0_D5 |
+                (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+        MX28_PAD_SSP0_DATA6__SSP0_D6 |
+                (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+        MX28_PAD_SSP0_DATA7__SSP0_D7 |
+                (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+        MX28_PAD_SSP0_CMD__SSP0_CMD |
+                (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+        MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT |
+                (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
+        MX28_PAD_SSP0_SCK__SSP0_SCK |
+                (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
+
+        /* led */
+        MX28_PAD_PWM3__GPIO_3_28 | MXS_PAD_CTRL,
+
+        /* saif0 & saif1 */
+        MX28_PAD_SAIF0_MCLK__SAIF0_MCLK |
+                (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+        MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK |
+                (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+        MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK |
+                (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+        MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0 |
+                (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+        MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0 |
+                (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+};
+
+/* led */
+static const struct gpio_led apx4devkit_leds[] __initconst = {
+        {
+                .name = "user-led",
+                .default_trigger = "heartbeat",
+                .gpio = APX4DEVKIT_GPIO_USERLED,
+        },
+};
+
+static const struct gpio_led_platform_data apx4devkit_led_data __initconst = {
+        .leds = apx4devkit_leds,
+        .num_leds = ARRAY_SIZE(apx4devkit_leds),
+};
+
+static const struct fec_platform_data mx28_fec_pdata __initconst = {
+        .phy = PHY_INTERFACE_MODE_RMII,
+};
+
+static const struct mxs_mmc_platform_data apx4devkit_mmc_pdata __initconst = {
+        .wp_gpio = -EINVAL,
+        .flags = SLOTF_4_BIT_CAPABLE,
+};
+
+static const struct i2c_board_info apx4devkit_i2c_boardinfo[] __initconst = {
+        { I2C_BOARD_INFO("sgtl5000", 0x0a) }, /* ASoC */
+        { I2C_BOARD_INFO("pcf8563", 0x51) }, /* RTC */
+};
+
+#if defined(CONFIG_REGULATOR_FIXED_VOLTAGE) || \
+                defined(CONFIG_REGULATOR_FIXED_VOLTAGE_MODULE)
+static struct regulator_consumer_supply apx4devkit_audio_consumer_supplies[] = {
+        REGULATOR_SUPPLY("VDDA", "0-000a"),
+        REGULATOR_SUPPLY("VDDIO", "0-000a"),
+};
+
+static struct regulator_init_data apx4devkit_vdd_reg_init_data = {
+        .constraints    = {
+                .name   = "3V3",
+                .always_on = 1,
+        },
+        .consumer_supplies = apx4devkit_audio_consumer_supplies,
+        .num_consumer_supplies = ARRAY_SIZE(apx4devkit_audio_consumer_supplies),
+};
+
+static struct fixed_voltage_config apx4devkit_vdd_pdata = {
+        .supply_name    = "board-3V3",
+        .microvolts     = 3300000,
+        .gpio           = -EINVAL,
+        .enabled_at_boot = 1,
+        .init_data      = &apx4devkit_vdd_reg_init_data,
+};
+
+static struct platform_device apx4devkit_voltage_regulator = {
+        .name           = "reg-fixed-voltage",
+        .id             = -1,
+        .num_resources  = 0,
+        .dev            = {
+                .platform_data  = &apx4devkit_vdd_pdata,
+        },
+};
+
+static void __init apx4devkit_add_regulators(void)
+{
+        platform_device_register(&apx4devkit_voltage_regulator);
+}
+#else
+static void __init apx4devkit_add_regulators(void) {}
+#endif
+
+static const struct mxs_saif_platform_data
+                        apx4devkit_mxs_saif_pdata[] __initconst = {
+        /* working on EXTMSTR0 mode (saif0 master, saif1 slave) */
+        {
+                .master_mode = 1,
+                .master_id = 0,
+        }, {
+                .master_mode = 0,
+                .master_id = 0,
+        },
+};
+
+static int apx4devkit_phy_fixup(struct phy_device *phy)
+{
+        phy->dev_flags |= MICREL_PHY_50MHZ_CLK;
+        return 0;
+}
+
+static void __init apx4devkit_init(void)
+{
+        mxs_iomux_setup_multiple_pads(apx4devkit_pads,
+                        ARRAY_SIZE(apx4devkit_pads));
+
+        mx28_add_duart();
+        mx28_add_auart0();
+        mx28_add_auart1();
+        mx28_add_auart2();
+        mx28_add_auart3();
+
+        /*
+         * Register fixup for the Micrel KS8031 PHY clock
+         * (shares same ID with KS8051)
+         */
+        phy_register_fixup_for_uid(PHY_ID_KS8051, MICREL_PHY_ID_MASK,
+                        apx4devkit_phy_fixup);
+
+        mx28_add_fec(0, &mx28_fec_pdata);
+
+        mx28_add_mxs_mmc(0, &apx4devkit_mmc_pdata);
+
+        gpio_led_register_device(0, &apx4devkit_led_data);
+
+        mxs_saif_clkmux_select(MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR0);
+        mx28_add_saif(0, &apx4devkit_mxs_saif_pdata[0]);
+        mx28_add_saif(1, &apx4devkit_mxs_saif_pdata[1]);
+
+        apx4devkit_add_regulators();
+
+        mx28_add_mxs_i2c(0);
+        i2c_register_board_info(0, apx4devkit_i2c_boardinfo,
+                        ARRAY_SIZE(apx4devkit_i2c_boardinfo));
+
+        mxs_add_platform_device("mxs-sgtl5000", 0, NULL, 0, NULL, 0);
+}
+
+static void __init apx4devkit_timer_init(void)
+{
+        mx28_clocks_init();
+}
+
+static struct sys_timer apx4devkit_timer = {
+        .init   = apx4devkit_timer_init,
+};
+
+MACHINE_START(APX4DEVKIT, "Bluegiga APX4 Development Kit")
+        .map_io         = mx28_map_io,
+        .init_irq       = mx28_init_irq,
+        .timer          = &apx4devkit_timer,
+        .init_machine   = apx4devkit_init,
+        .restart        = mxs_restart,
+MACHINE_END
diff --git a/arch/arm/mach-mxs/mach-m28evk.c b/arch/arm/mach-mxs/mach-m28evk.c
index 2f2758230edf..06d79963611c 100644
--- a/arch/arm/mach-mxs/mach-m28evk.c
+++ b/arch/arm/mach-mxs/mach-m28evk.c
@@ -247,18 +247,15 @@ static int __init m28evk_fec_get_mac(void)
         u32 val;
         const u32 *ocotp = mxs_get_ocotp();
 
-        if (!ocotp) {
-                pr_err("%s: timeout when reading fec mac from OCOTP\n",
-                        __func__);
+        if (!ocotp)
                 return -ETIMEDOUT;
-        }
 
         /*
          * OCOTP only stores the last 4 octets for each mac address,
          * so hard-code DENX OUI (C0:E5:4E) here.
          */
         for (i = 0; i < 2; i++) {
-                val = ocotp[i * 4];
+                val = ocotp[i];
                 mx28_fec_pdata[i].mac[0] = 0xC0;
                 mx28_fec_pdata[i].mac[1] = 0xE5;
                 mx28_fec_pdata[i].mac[2] = 0x4E;
diff --git a/arch/arm/mach-mxs/mach-mx28evk.c b/arch/arm/mach-mxs/mach-mx28evk.c
index fdb0a5664dd6..e386c142f93c 100644
--- a/arch/arm/mach-mxs/mach-mx28evk.c
+++ b/arch/arm/mach-mxs/mach-mx28evk.c
@@ -223,7 +223,6 @@ static const struct gpio_led_platform_data mx28evk_led_data __initconst = {
 /* fec */
 static void __init mx28evk_fec_reset(void)
 {
-        int ret;
         struct clk *clk;
 
         /* Enable fec phy clock */
@@ -231,32 +230,7 @@ static void __init mx28evk_fec_reset(void)
         if (!IS_ERR(clk))
                 clk_prepare_enable(clk);
 
-        /* Power up fec phy */
-        ret = gpio_request(MX28EVK_FEC_PHY_POWER, "fec-phy-power");
-        if (ret) {
-                pr_err("Failed to request gpio fec-phy-%s: %d\n", "power", ret);
-                return;
-        }
-
-        ret = gpio_direction_output(MX28EVK_FEC_PHY_POWER, 0);
-        if (ret) {
-                pr_err("Failed to drive gpio fec-phy-%s: %d\n", "power", ret);
-                return;
-        }
-
-        /* Reset fec phy */
-        ret = gpio_request(MX28EVK_FEC_PHY_RESET, "fec-phy-reset");
-        if (ret) {
-                pr_err("Failed to request gpio fec-phy-%s: %d\n", "reset", ret);
-                return;
-        }
-
-        gpio_direction_output(MX28EVK_FEC_PHY_RESET, 0);
-        if (ret) {
-                pr_err("Failed to drive gpio fec-phy-%s: %d\n", "reset", ret);
-                return;
-        }
-
+        gpio_set_value(MX28EVK_FEC_PHY_RESET, 0);
         mdelay(1);
         gpio_set_value(MX28EVK_FEC_PHY_RESET, 1);
 }
@@ -278,14 +252,14 @@ static int __init mx28evk_fec_get_mac(void)
         const u32 *ocotp = mxs_get_ocotp();
 
         if (!ocotp)
-                goto error;
+                return -ETIMEDOUT;
 
         /*
          * OCOTP only stores the last 4 octets for each mac address,
          * so hard-code Freescale OUI (00:04:9f) here.
          */
         for (i = 0; i < 2; i++) {
-                val = ocotp[i * 4];
+                val = ocotp[i];
                 mx28_fec_pdata[i].mac[0] = 0x00;
                 mx28_fec_pdata[i].mac[1] = 0x04;
                 mx28_fec_pdata[i].mac[2] = 0x9f;
@@ -295,10 +269,6 @@ static int __init mx28evk_fec_get_mac(void)
         }
 
         return 0;
-
-error:
-        pr_err("%s: timeout when reading fec mac from OCOTP\n", __func__);
-        return -ETIMEDOUT;
 }
 
 /*
@@ -417,9 +387,14 @@ static void __init mx28evk_add_regulators(void)
 static void __init mx28evk_add_regulators(void) {}
 #endif
 
-static struct gpio mx28evk_lcd_gpios[] = {
+static const struct gpio mx28evk_gpios[] __initconst = {
         { MX28EVK_LCD_ENABLE, GPIOF_OUT_INIT_HIGH, "lcd-enable" },
         { MX28EVK_BL_ENABLE, GPIOF_OUT_INIT_HIGH, "bl-enable" },
+        { MX28EVK_FLEXCAN_SWITCH, GPIOF_DIR_OUT, "flexcan-switch" },
+        { MX28EVK_MMC0_SLOT_POWER, GPIOF_OUT_INIT_LOW, "mmc0-slot-power" },
+        { MX28EVK_MMC1_SLOT_POWER, GPIOF_OUT_INIT_LOW, "mmc1-slot-power" },
+        { MX28EVK_FEC_PHY_POWER, GPIOF_OUT_INIT_LOW, "fec-phy-power" },
+        { MX28EVK_FEC_PHY_RESET, GPIOF_DIR_OUT, "fec-phy-reset" },
 };
 
 static const struct mxs_saif_platform_data
@@ -447,25 +422,18 @@ static void __init mx28evk_init(void)
         if (mx28evk_fec_get_mac())
                 pr_warn("%s: failed on fec mac setup\n", __func__);
 
+        ret = gpio_request_array(mx28evk_gpios, ARRAY_SIZE(mx28evk_gpios));
+        if (ret)
+                pr_err("One or more GPIOs failed to be requested: %d\n", ret);
+
         mx28evk_fec_reset();
         mx28_add_fec(0, &mx28_fec_pdata[0]);
         mx28_add_fec(1, &mx28_fec_pdata[1]);
 
-        ret = gpio_request_one(MX28EVK_FLEXCAN_SWITCH, GPIOF_DIR_OUT,
-                                "flexcan-switch");
-        if (ret) {
-                pr_err("failed to request gpio flexcan-switch: %d\n", ret);
-        } else {
-                mx28_add_flexcan(0, &mx28evk_flexcan_pdata[0]);
-                mx28_add_flexcan(1, &mx28evk_flexcan_pdata[1]);
-        }
+        mx28_add_flexcan(0, &mx28evk_flexcan_pdata[0]);
+        mx28_add_flexcan(1, &mx28evk_flexcan_pdata[1]);
 
-        ret = gpio_request_array(mx28evk_lcd_gpios,
-                                 ARRAY_SIZE(mx28evk_lcd_gpios));
-        if (ret)
-                pr_warn("failed to request gpio pins for lcd: %d\n", ret);
-        else
-                mx28_add_mxsfb(&mx28evk_mxsfb_pdata);
+        mx28_add_mxsfb(&mx28evk_mxsfb_pdata);
 
         mxs_saif_clkmux_select(MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR0);
         mx28_add_saif(0, &mx28evk_mxs_saif_pdata[0]);
@@ -480,20 +448,8 @@ static void __init mx28evk_init(void)
         mxs_add_platform_device("mxs-sgtl5000", 0, NULL, 0,
                         NULL, 0);
 
-        /* power on mmc slot by writing 0 to the gpio */
-        ret = gpio_request_one(MX28EVK_MMC0_SLOT_POWER, GPIOF_OUT_INIT_LOW,
-                               "mmc0-slot-power");
-        if (ret)
-                pr_warn("failed to request gpio mmc0-slot-power: %d\n", ret);
-        else
-                mx28_add_mxs_mmc(0, &mx28evk_mmc_pdata[0]);
-
-        ret = gpio_request_one(MX28EVK_MMC1_SLOT_POWER, GPIOF_OUT_INIT_LOW,
-                               "mmc1-slot-power");
-        if (ret)
-                pr_warn("failed to request gpio mmc1-slot-power: %d\n", ret);
-        else
-                mx28_add_mxs_mmc(1, &mx28evk_mmc_pdata[1]);
+        mx28_add_mxs_mmc(0, &mx28evk_mmc_pdata[0]);
+        mx28_add_mxs_mmc(1, &mx28evk_mmc_pdata[1]);
 
         mx28_add_rtc_stmp3xxx();
 
diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig
index 922ab0dc2bcd..dfab466ebd1d 100644
--- a/arch/arm/mach-omap1/Kconfig
+++ b/arch/arm/mach-omap1/Kconfig
@@ -152,6 +152,10 @@ config MACH_AMS_DELTA
         bool "Amstrad E3 (Delta)"
         depends on ARCH_OMAP1 && ARCH_OMAP15XX
         select FIQ
+        select GPIO_GENERIC_PLATFORM
+        select LEDS_GPIO_REGISTER
+        select REGULATOR
+        select REGULATOR_FIXED_VOLTAGE
         help
           Support for the Amstrad E3 (codename Delta) videophone. Say Y here
           if you have such a device.
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index 83eac744ddb9..c1b681ef4cba 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -11,6 +11,7 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
+#include <linux/basic_mmio_gpio.h>
 #include <linux/gpio.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
@@ -18,6 +19,9 @@
 #include <linux/interrupt.h>
 #include <linux/leds.h>
 #include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
 #include <linux/serial_8250.h>
 #include <linux/export.h>
 #include <linux/omapfb.h>
@@ -43,9 +47,6 @@
 #include "iomap.h"
 #include "common.h"
 
-static u8 ams_delta_latch1_reg;
-static u16 ams_delta_latch2_reg;
-
 static const unsigned int ams_delta_keymap[] = {
         KEY(0, 0, KEY_F1),              /* Advert    */
 
@@ -124,54 +125,188 @@ static const unsigned int ams_delta_keymap[] = {
         KEY(7, 3, KEY_LEFTCTRL),        /* Vol down  */
 };
 
-void ams_delta_latch1_write(u8 mask, u8 value)
-{
-        ams_delta_latch1_reg &= ~mask;
-        ams_delta_latch1_reg |= value;
-        *(volatile __u8 *) AMS_DELTA_LATCH1_VIRT = ams_delta_latch1_reg;
-}
-
-void ams_delta_latch2_write(u16 mask, u16 value)
-{
-        ams_delta_latch2_reg &= ~mask;
-        ams_delta_latch2_reg |= value;
-        *(volatile __u16 *) AMS_DELTA_LATCH2_VIRT = ams_delta_latch2_reg;
-}
+#define LATCH1_PHYS     0x01000000
+#define LATCH1_VIRT     0xEA000000
+#define MODEM_PHYS      0x04000000
+#define MODEM_VIRT      0xEB000000
+#define LATCH2_PHYS     0x08000000
+#define LATCH2_VIRT     0xEC000000
 
 static struct map_desc ams_delta_io_desc[] __initdata = {
         /* AMS_DELTA_LATCH1 */
         {
-                .virtual        = AMS_DELTA_LATCH1_VIRT,
-                .pfn            = __phys_to_pfn(AMS_DELTA_LATCH1_PHYS),
+                .virtual        = LATCH1_VIRT,
+                .pfn            = __phys_to_pfn(LATCH1_PHYS),
                 .length         = 0x01000000,
                 .type           = MT_DEVICE
         },
         /* AMS_DELTA_LATCH2 */
         {
-                .virtual        = AMS_DELTA_LATCH2_VIRT,
-                .pfn            = __phys_to_pfn(AMS_DELTA_LATCH2_PHYS),
+                .virtual        = LATCH2_VIRT,
+                .pfn            = __phys_to_pfn(LATCH2_PHYS),
                 .length         = 0x01000000,
                 .type           = MT_DEVICE
         },
         /* AMS_DELTA_MODEM */
         {
-                .virtual        = AMS_DELTA_MODEM_VIRT,
-                .pfn            = __phys_to_pfn(AMS_DELTA_MODEM_PHYS),
+                .virtual        = MODEM_VIRT,
+                .pfn            = __phys_to_pfn(MODEM_PHYS),
                 .length         = 0x01000000,
                 .type           = MT_DEVICE
         }
 };
 
-static struct omap_lcd_config ams_delta_lcd_config = {
+static struct omap_lcd_config ams_delta_lcd_config __initdata = {
         .ctrl_name      = "internal",
 };
 
-static struct omap_usb_config ams_delta_usb_config __initdata = {
+static struct omap_usb_config ams_delta_usb_config = {
         .register_host  = 1,
         .hmc_mode       = 16,
         .pins[0]        = 2,
 };
 
+#define LATCH1_GPIO_BASE        232
+#define LATCH1_NGPIO            8
+
+static struct resource latch1_resources[] = {
+        [0] = {
+                .name   = "dat",
+                .start  = LATCH1_PHYS,
+                .end    = LATCH1_PHYS + (LATCH1_NGPIO - 1) / 8,
+                .flags  = IORESOURCE_MEM,
+        },
+};
+
+static struct bgpio_pdata latch1_pdata = {
+        .base   = LATCH1_GPIO_BASE,
+        .ngpio  = LATCH1_NGPIO,
+};
+
+static struct platform_device latch1_gpio_device = {
+        .name           = "basic-mmio-gpio",
+        .id             = 0,
+        .resource       = latch1_resources,
+        .num_resources  = ARRAY_SIZE(latch1_resources),
+        .dev            = {
+                .platform_data  = &latch1_pdata,
+        },
+};
+
+static struct resource latch2_resources[] = {
+        [0] = {
+                .name   = "dat",
+                .start  = LATCH2_PHYS,
+                .end    = LATCH2_PHYS + (AMS_DELTA_LATCH2_NGPIO - 1) / 8,
+                .flags  = IORESOURCE_MEM,
+        },
+};
+
+static struct bgpio_pdata latch2_pdata = {
+        .base   = AMS_DELTA_LATCH2_GPIO_BASE,
+        .ngpio  = AMS_DELTA_LATCH2_NGPIO,
+};
+
+static struct platform_device latch2_gpio_device = {
+        .name           = "basic-mmio-gpio",
+        .id             = 1,
+        .resource       = latch2_resources,
+        .num_resources  = ARRAY_SIZE(latch2_resources),
+        .dev            = {
+                .platform_data  = &latch2_pdata,
+        },
+};
+
+static const struct gpio latch_gpios[] __initconst = {
+        {
+                .gpio   = LATCH1_GPIO_BASE + 6,
+                .flags  = GPIOF_OUT_INIT_LOW,
+                .label  = "dockit1",
+        },
+        {
+                .gpio   = LATCH1_GPIO_BASE + 7,
+                .flags  = GPIOF_OUT_INIT_LOW,
+                .label  = "dockit2",
+        },
+        {
+                .gpio   = AMS_DELTA_GPIO_PIN_SCARD_RSTIN,
+                .flags  = GPIOF_OUT_INIT_LOW,
+                .label  = "scard_rstin",
+        },
+        {
+                .gpio   = AMS_DELTA_GPIO_PIN_SCARD_CMDVCC,
+                .flags  = GPIOF_OUT_INIT_LOW,
+                .label  = "scard_cmdvcc",
+        },
+        {
+                .gpio   = AMS_DELTA_GPIO_PIN_MODEM_CODEC,
+                .flags  = GPIOF_OUT_INIT_LOW,
+                .label  = "modem_codec",
+        },
+        {
+                .gpio   = AMS_DELTA_LATCH2_GPIO_BASE + 14,
+                .flags  = GPIOF_OUT_INIT_LOW,
+                .label  = "hookflash1",
+        },
+        {
+                .gpio   = AMS_DELTA_LATCH2_GPIO_BASE + 15,
+                .flags  = GPIOF_OUT_INIT_LOW,
+                .label  = "hookflash2",
+        },
+};
+
+static struct regulator_consumer_supply modem_nreset_consumers[] = {
+        REGULATOR_SUPPLY("RESET#", "serial8250.1"),
+        REGULATOR_SUPPLY("POR", "cx20442-codec"),
+};
+
+static struct regulator_init_data modem_nreset_data = {
+        .constraints            = {
+                .valid_ops_mask         = REGULATOR_CHANGE_STATUS,
+                .boot_on                = 1,
+        },
+        .num_consumer_supplies  = ARRAY_SIZE(modem_nreset_consumers),
+        .consumer_supplies      = modem_nreset_consumers,
+};
+
+static struct fixed_voltage_config modem_nreset_config = {
+        .supply_name            = "modem_nreset",
+        .microvolts             = 3300000,
+        .gpio                   = AMS_DELTA_GPIO_PIN_MODEM_NRESET,
+        .startup_delay          = 25000,
+        .enable_high            = 1,
+        .enabled_at_boot        = 1,
+        .init_data              = &modem_nreset_data,
+};
+
+static struct platform_device modem_nreset_device = {
+        .name   = "reg-fixed-voltage",
+        .id     = -1,
+        .dev    = {
+                .platform_data  = &modem_nreset_config,
+        },
+};
+
+struct modem_private_data {
+        struct regulator *regulator;
+};
+
+static struct modem_private_data modem_priv;
+
+void ams_delta_latch_write(int base, int ngpio, u16 mask, u16 value)
+{
+        int bit = 0;
+        u16 bitpos = 1 << bit;
+
+        for (; bit < ngpio; bit++, bitpos = bitpos << 1) {
+                if (!(mask & bitpos))
+                        continue;
+                else
+                        gpio_set_value(base + bit, (value & bitpos) != 0);
+        }
+}
+EXPORT_SYMBOL(ams_delta_latch_write);
+
 static struct resource ams_delta_nand_resources[] = {
         [0] = {
                 .start  = OMAP1_MPUIO_BASE,
@@ -201,7 +336,7 @@ static const struct matrix_keymap_data ams_delta_keymap_data = {
         .keymap_size    = ARRAY_SIZE(ams_delta_keymap),
 };
 
-static struct omap_kp_platform_data ams_delta_kp_data __initdata = {
+static struct omap_kp_platform_data ams_delta_kp_data = {
         .rows           = 8,
         .cols           = 8,
         .keymap_data    = &ams_delta_keymap_data,
@@ -223,9 +358,45 @@ static struct platform_device ams_delta_lcd_device = {
         .id     = -1,
 };
 
-static struct platform_device ams_delta_led_device = {
-        .name   = "ams-delta-led",
-        .id     = -1
+static const struct gpio_led gpio_leds[] __initconst = {
+        {
+                .name            = "camera",
+                .gpio            = LATCH1_GPIO_BASE + 0,
+                .default_state   = LEDS_GPIO_DEFSTATE_OFF,
+#ifdef CONFIG_LEDS_TRIGGERS
+                .default_trigger = "ams_delta_camera",
+#endif
+        },
+        {
+                .name            = "advert",
+                .gpio            = LATCH1_GPIO_BASE + 1,
+                .default_state   = LEDS_GPIO_DEFSTATE_OFF,
+        },
+        {
+                .name            = "email",
+                .gpio            = LATCH1_GPIO_BASE + 2,
+                .default_state   = LEDS_GPIO_DEFSTATE_OFF,
+        },
+        {
+                .name            = "handsfree",
+                .gpio            = LATCH1_GPIO_BASE + 3,
+                .default_state   = LEDS_GPIO_DEFSTATE_OFF,
+        },
+        {
+                .name            = "voicemail",
+                .gpio            = LATCH1_GPIO_BASE + 4,
+                .default_state   = LEDS_GPIO_DEFSTATE_OFF,
+        },
+        {
+                .name            = "voice",
+                .gpio            = LATCH1_GPIO_BASE + 5,
+                .default_state   = LEDS_GPIO_DEFSTATE_OFF,
+        },
+};
+
+static const struct gpio_led_platform_data leds_pdata __initconst = {
+        .leds           = gpio_leds,
+        .num_leds       = ARRAY_SIZE(gpio_leds),
 };
 
 static struct i2c_board_info ams_delta_camera_board_info[] = {
@@ -274,13 +445,17 @@ static struct omap1_cam_platform_data ams_delta_camera_platform_data = {
 };
 
 static struct platform_device *ams_delta_devices[] __initdata = {
-        &ams_delta_nand_device,
+        &latch1_gpio_device,
+        &latch2_gpio_device,
         &ams_delta_kp_device,
-        &ams_delta_lcd_device,
-        &ams_delta_led_device,
         &ams_delta_camera_device,
 };
 
+static struct platform_device *late_devices[] __initdata = {
+        &ams_delta_nand_device,
+        &ams_delta_lcd_device,
+};
+
 static void __init ams_delta_init(void)
 {
         /* mux pins for uarts */
@@ -304,15 +479,13 @@ static void __init ams_delta_init(void)
         omap_serial_init();
         omap_register_i2c_bus(1, 100, NULL, 0);
 
-        /* Clear latch2 (NAND, LCD, modem enable) */
-        ams_delta_latch2_write(~0, 0);
-
         omap1_usb_init(&ams_delta_usb_config);
         omap1_set_camera_info(&ams_delta_camera_platform_data);
 #ifdef CONFIG_LEDS_TRIGGERS
         led_trigger_register_simple("ams_delta_camera",
                         &ams_delta_camera_led_trigger);
 #endif
+        gpio_led_register_device(-1, &leds_pdata);
         platform_add_devices(ams_delta_devices, ARRAY_SIZE(ams_delta_devices));
 
         ams_delta_init_fiq();
@@ -322,16 +495,34 @@ static void __init ams_delta_init(void)
         omapfb_set_lcd_config(&ams_delta_lcd_config);
 }
 
+static void modem_pm(struct uart_port *port, unsigned int state, unsigned old)
+{
+        struct modem_private_data *priv = port->private_data;
+
+        if (IS_ERR(priv->regulator))
+                return;
+
+        if (state == old)
+                return;
+
+        if (state == 0)
+                regulator_enable(priv->regulator);
+        else if (old == 0)
+                regulator_disable(priv->regulator);
+}
+
 static struct plat_serial8250_port ams_delta_modem_ports[] = {
         {
-                .membase        = IOMEM(AMS_DELTA_MODEM_VIRT),
-                .mapbase        = AMS_DELTA_MODEM_PHYS,
+                .membase        = IOMEM(MODEM_VIRT),
+                .mapbase        = MODEM_PHYS,
                 .irq            = -EINVAL, /* changed later */
                 .flags          = UPF_BOOT_AUTOCONF,
                 .irqflags       = IRQF_TRIGGER_RISING,
                 .iotype         = UPIO_MEM,
                 .regshift       = 1,
                 .uartclk        = BASE_BAUD * 16,
+                .pm             = modem_pm,
+                .private_data   = &modem_priv,
         },
         { },
 };
@@ -344,13 +535,27 @@ static struct platform_device ams_delta_modem_device = {
         },
 };
 
-static int __init ams_delta_modem_init(void)
+static int __init late_init(void)
 {
         int err;
 
         if (!machine_is_ams_delta())
                 return -ENODEV;
 
+        err = gpio_request_array(latch_gpios, ARRAY_SIZE(latch_gpios));
+        if (err) {
+                pr_err("Couldn't take over latch1/latch2 GPIO pins\n");
+                return err;
+        }
+
+        platform_add_devices(late_devices, ARRAY_SIZE(late_devices));
+
+        err = platform_device_register(&modem_nreset_device);
+        if (err) {
+                pr_err("Couldn't register the modem regulator device\n");
+                return err;
+        }
+
         omap_cfg_reg(M14_1510_GPIO2);
         ams_delta_modem_ports[0].irq =
                         gpio_to_irq(AMS_DELTA_GPIO_PIN_MODEM_IRQ);
@@ -362,13 +567,35 @@ static int __init ams_delta_modem_init(void)
         }
         gpio_direction_input(AMS_DELTA_GPIO_PIN_MODEM_IRQ);
 
-        ams_delta_latch2_write(
-                AMS_DELTA_LATCH2_MODEM_NRESET | AMS_DELTA_LATCH2_MODEM_CODEC,
-                AMS_DELTA_LATCH2_MODEM_NRESET | AMS_DELTA_LATCH2_MODEM_CODEC);
+        /* Initialize the modem_nreset regulator consumer before use */
+        modem_priv.regulator = ERR_PTR(-ENODEV);
+
+        ams_delta_latch2_write(AMS_DELTA_LATCH2_MODEM_CODEC,
+                        AMS_DELTA_LATCH2_MODEM_CODEC);
+
+        err = platform_device_register(&ams_delta_modem_device);
+        if (err)
+                goto gpio_free;
 
-        return platform_device_register(&ams_delta_modem_device);
+        /*
+         * Once the modem device is registered, the modem_nreset
+         * regulator can be requested on behalf of that device.
+         */
+        modem_priv.regulator = regulator_get(&ams_delta_modem_device.dev,
+                        "RESET#");
+        if (IS_ERR(modem_priv.regulator)) {
+                err = PTR_ERR(modem_priv.regulator);
+                goto unregister;
+        }
+        return 0;
+
+unregister:
+        platform_device_unregister(&ams_delta_modem_device);
+gpio_free:
+        gpio_free(AMS_DELTA_GPIO_PIN_MODEM_IRQ);
+        return err;
 }
-arch_initcall(ams_delta_modem_init);
+late_initcall(late_init);
 
 static void __init ams_delta_map_io(void)
 {
@@ -387,6 +614,3 @@ MACHINE_START(AMS_DELTA, "Amstrad E3 (Delta)")
         .timer          = &omap1_timer,
         .restart        = omap1_restart,
 MACHINE_END
-
-EXPORT_SYMBOL(ams_delta_latch1_write);
-EXPORT_SYMBOL(ams_delta_latch2_write);
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 21a4095a1000..36b371face3d 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -245,10 +245,11 @@ config MACH_NOKIA_N8X0
         select MACH_NOKIA_N810_WIMAX
 
 config MACH_NOKIA_RM680
-        bool "Nokia RM-680 board"
+        bool "Nokia RM-680/696 board"
         depends on ARCH_OMAP3
         default y
         select OMAP_PACKAGE_CBB
+        select MACH_NOKIA_RM696
 
 config MACH_NOKIA_RX51
         bool "Nokia RX-51 board"
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 3f850fca8c92..49f92bc1c311 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -270,4 +270,7 @@ ifneq ($(CONFIG_HWSPINLOCK_OMAP),)
 obj-y                                   += hwspinlock.o
 endif
 
+emac-$(CONFIG_TI_DAVINCI_EMAC)          := am35xx-emac.o
+obj-y                                   += $(emac-m) $(emac-y)
+
 obj-y                                   += common-board-devices.o twl-common.o
diff --git a/arch/arm/mach-omap2/am35xx-emac.c b/arch/arm/mach-omap2/am35xx-emac.c
new file mode 100644
index 000000000000..1f97e7475206
--- /dev/null
+++ b/arch/arm/mach-omap2/am35xx-emac.c
@@ -0,0 +1,117 @@
+/*
+ * Copyright (C) 2011 Ilya Yanok, Emcraft Systems
+ *
+ * Based on mach-omap2/board-am3517evm.c
+ * Copyright (C) 2009 Texas Instruments Incorporated
+ * Author: Ranjith Lohithakshan <ranjithl@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any kind,
+ * whether express or implied; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/davinci_emac.h>
+#include <linux/platform_device.h>
+#include <plat/irqs.h>
+#include <mach/am35xx.h>
+
+#include "control.h"
+
+static struct mdio_platform_data am35xx_emac_mdio_pdata;
+
+static struct resource am35xx_emac_mdio_resources[] = {
+        DEFINE_RES_MEM(AM35XX_IPSS_EMAC_BASE + AM35XX_EMAC_MDIO_OFFSET, SZ_4K),
+};
+
+static struct platform_device am35xx_emac_mdio_device = {
+        .name           = "davinci_mdio",
+        .id             = 0,
+        .num_resources  = ARRAY_SIZE(am35xx_emac_mdio_resources),
+        .resource       = am35xx_emac_mdio_resources,
+        .dev.platform_data = &am35xx_emac_mdio_pdata,
+};
+
+static void am35xx_enable_emac_int(void)
+{
+        u32 regval;
+
+        regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
+        regval = (regval | AM35XX_CPGMAC_C0_RX_PULSE_CLR |
+                  AM35XX_CPGMAC_C0_TX_PULSE_CLR |
+                  AM35XX_CPGMAC_C0_MISC_PULSE_CLR |
+                  AM35XX_CPGMAC_C0_RX_THRESH_CLR);
+        omap_ctrl_writel(regval, AM35XX_CONTROL_LVL_INTR_CLEAR);
+        regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
+}
+
+static void am35xx_disable_emac_int(void)
+{
+        u32 regval;
+
+        regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
+        regval = (regval | AM35XX_CPGMAC_C0_RX_PULSE_CLR |
+                  AM35XX_CPGMAC_C0_TX_PULSE_CLR);
+        omap_ctrl_writel(regval, AM35XX_CONTROL_LVL_INTR_CLEAR);
+        regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
+}
+
+static struct emac_platform_data am35xx_emac_pdata = {
+        .ctrl_reg_offset        = AM35XX_EMAC_CNTRL_OFFSET,
+        .ctrl_mod_reg_offset    = AM35XX_EMAC_CNTRL_MOD_OFFSET,
+        .ctrl_ram_offset        = AM35XX_EMAC_CNTRL_RAM_OFFSET,
+        .ctrl_ram_size          = AM35XX_EMAC_CNTRL_RAM_SIZE,
+        .hw_ram_addr            = AM35XX_EMAC_HW_RAM_ADDR,
+        .version                = EMAC_VERSION_2,
+        .interrupt_enable       = am35xx_enable_emac_int,
+        .interrupt_disable      = am35xx_disable_emac_int,
+};
+
+static struct resource am35xx_emac_resources[] = {
+        DEFINE_RES_MEM(AM35XX_IPSS_EMAC_BASE, 0x30000),
+        DEFINE_RES_IRQ(INT_35XX_EMAC_C0_RXTHRESH_IRQ),
+        DEFINE_RES_IRQ(INT_35XX_EMAC_C0_RX_PULSE_IRQ),
+        DEFINE_RES_IRQ(INT_35XX_EMAC_C0_TX_PULSE_IRQ),
+        DEFINE_RES_IRQ(INT_35XX_EMAC_C0_MISC_PULSE_IRQ),
+};
+
+static struct platform_device am35xx_emac_device = {
+        .name           = "davinci_emac",
+        .id             = -1,
+        .num_resources  = ARRAY_SIZE(am35xx_emac_resources),
+        .resource       = am35xx_emac_resources,
+        .dev            = {
+                .platform_data  = &am35xx_emac_pdata,
+        },
+};
+
+void __init am35xx_emac_init(unsigned long mdio_bus_freq, u8 rmii_en)
+{
+        unsigned int regval;
+        int err;
+
+        am35xx_emac_pdata.rmii_en = rmii_en;
+        am35xx_emac_mdio_pdata.bus_freq = mdio_bus_freq;
+        err = platform_device_register(&am35xx_emac_device);
+        if (err) {
+                pr_err("AM35x: failed registering EMAC device: %d\n", err);
+                return;
+        }
+
+        err = platform_device_register(&am35xx_emac_mdio_device);
+        if (err) {
+                pr_err("AM35x: failed registering EMAC MDIO device: %d\n", err);
+                platform_device_unregister(&am35xx_emac_device);
+                return;
+        }
+
+        regval = omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET);
+        regval = regval & (~(AM35XX_CPGMACSS_SW_RST));
+        omap_ctrl_writel(regval, AM35XX_CONTROL_IP_SW_RESET);
+        regval = omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET);
+}
diff --git a/arch/arm/mach-omap2/am35xx-emac.h b/arch/arm/mach-omap2/am35xx-emac.h
new file mode 100644
index 000000000000..15c6f9ce59a2
--- /dev/null
+++ b/arch/arm/mach-omap2/am35xx-emac.h
@@ -0,0 +1,15 @@
+/*
+ * Copyright (C) 2011 Ilya Yanok, Emcraft Systems
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define AM35XX_DEFAULT_MDIO_FREQUENCY   1000000
+
+#if defined(CONFIG_TI_DAVINCI_EMAC) || defined(CONFIG_TI_DAVINCI_EMAC_MODULE)
+void am35xx_emac_init(unsigned long mdio_bus_freq, u8 rmii_en);
+#else
+static inline void am35xx_emac_init(unsigned long mdio_bus_freq, u8 rmii_en) {}
+#endif
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index 890c446e7b35..30768c2f53fd 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -324,7 +324,10 @@ static struct spi_board_info sdp4430_spi_board_info[] __initdata = {
                 .bus_num                = 1,
                 .chip_select            = 0,
                 .max_speed_hz           = 24000000,
-                .irq                    = ETH_KS8851_IRQ,
+                /*
+                 * .irq is set to gpio_to_irq(ETH_KS8851_IRQ)
+                 * in omap_4430sdp_init
+                 */
         },
 };
 
diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c
index 71138a1271d8..3645285a3e2b 100644
--- a/arch/arm/mach-omap2/board-am3517evm.c
+++ b/arch/arm/mach-omap2/board-am3517evm.c
@@ -39,124 +39,11 @@
 #include <video/omap-panel-generic-dpi.h>
 #include <video/omap-panel-dvi.h>
 
+#include "am35xx-emac.h"
 #include "mux.h"
 #include "control.h"
 #include "hsmmc.h"
 
-#define AM35XX_EVM_MDIO_FREQUENCY       (1000000)
-
-static struct mdio_platform_data am3517_evm_mdio_pdata = {
-        .bus_freq       = AM35XX_EVM_MDIO_FREQUENCY,
-};
-
-static struct resource am3517_mdio_resources[] = {
-        {
-                .start  = AM35XX_IPSS_EMAC_BASE + AM35XX_EMAC_MDIO_OFFSET,
-                .end    = AM35XX_IPSS_EMAC_BASE + AM35XX_EMAC_MDIO_OFFSET +
-                          SZ_4K - 1,
-                .flags  = IORESOURCE_MEM,
-        },
-};
-
-static struct platform_device am3517_mdio_device = {
-        .name           = "davinci_mdio",
-        .id             = 0,
-        .num_resources  = ARRAY_SIZE(am3517_mdio_resources),
-        .resource       = am3517_mdio_resources,
-        .dev.platform_data = &am3517_evm_mdio_pdata,
-};
-
-static struct emac_platform_data am3517_evm_emac_pdata = {
-        .rmii_en        = 1,
-};
-
-static struct resource am3517_emac_resources[] = {
-        {
-                .start  = AM35XX_IPSS_EMAC_BASE,
-                .end    = AM35XX_IPSS_EMAC_BASE + 0x2FFFF,
-                .flags  = IORESOURCE_MEM,
-        },
-        {
-                .start  = INT_35XX_EMAC_C0_RXTHRESH_IRQ,
-                .end    = INT_35XX_EMAC_C0_RXTHRESH_IRQ,
-                .flags  = IORESOURCE_IRQ,
-        },
-        {
-                .start  = INT_35XX_EMAC_C0_RX_PULSE_IRQ,
-                .end    = INT_35XX_EMAC_C0_RX_PULSE_IRQ,
-                .flags  = IORESOURCE_IRQ,
-        },
-        {
-                .start  = INT_35XX_EMAC_C0_TX_PULSE_IRQ,
-                .end    = INT_35XX_EMAC_C0_TX_PULSE_IRQ,
-                .flags  = IORESOURCE_IRQ,
-        },
-        {
-                .start  = INT_35XX_EMAC_C0_MISC_PULSE_IRQ,
-                .end    = INT_35XX_EMAC_C0_MISC_PULSE_IRQ,
-                .flags  = IORESOURCE_IRQ,
-        },
-};
-
-static struct platform_device am3517_emac_device = {
-        .name           = "davinci_emac",
-        .id             = -1,
-        .num_resources  = ARRAY_SIZE(am3517_emac_resources),
-        .resource       = am3517_emac_resources,
-};
-
-static void am3517_enable_ethernet_int(void)
-{
-        u32 regval;
-
-        regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
-        regval = (regval | AM35XX_CPGMAC_C0_RX_PULSE_CLR |
-                AM35XX_CPGMAC_C0_TX_PULSE_CLR |
-                AM35XX_CPGMAC_C0_MISC_PULSE_CLR |
-                AM35XX_CPGMAC_C0_RX_THRESH_CLR);
-        omap_ctrl_writel(regval, AM35XX_CONTROL_LVL_INTR_CLEAR);
-        regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
-}
-
-static void am3517_disable_ethernet_int(void)
-{
-        u32 regval;
-
-        regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
-        regval = (regval | AM35XX_CPGMAC_C0_RX_PULSE_CLR |
-                AM35XX_CPGMAC_C0_TX_PULSE_CLR);
-        omap_ctrl_writel(regval, AM35XX_CONTROL_LVL_INTR_CLEAR);
-        regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
-}
-
-static void am3517_evm_ethernet_init(struct emac_platform_data *pdata)
-{
-        unsigned int regval;
-
-        pdata->ctrl_reg_offset          = AM35XX_EMAC_CNTRL_OFFSET;
-        pdata->ctrl_mod_reg_offset      = AM35XX_EMAC_CNTRL_MOD_OFFSET;
-        pdata->ctrl_ram_offset          = AM35XX_EMAC_CNTRL_RAM_OFFSET;
-        pdata->ctrl_ram_size            = AM35XX_EMAC_CNTRL_RAM_SIZE;
-        pdata->version                  = EMAC_VERSION_2;
-        pdata->hw_ram_addr              = AM35XX_EMAC_HW_RAM_ADDR;
-        pdata->interrupt_enable         = am3517_enable_ethernet_int;
-        pdata->interrupt_disable        = am3517_disable_ethernet_int;
-        am3517_emac_device.dev.platform_data    = pdata;
-        platform_device_register(&am3517_emac_device);
-        platform_device_register(&am3517_mdio_device);
-        clk_add_alias(NULL, dev_name(&am3517_mdio_device.dev),
-                      NULL, &am3517_emac_device.dev);
-
-        regval = omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET);
-        regval = regval & (~(AM35XX_CPGMACSS_SW_RST));
-        omap_ctrl_writel(regval, AM35XX_CONTROL_IP_SW_RESET);
-        regval = omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET);
-
-        return ;
-}
-
-
-
 #define LCD_PANEL_PWR           176
 #define LCD_PANEL_BKLIGHT_PWR   182
 #define LCD_PANEL_PWM           181
@@ -498,7 +385,7 @@ static void __init am3517_evm_init(void)
         i2c_register_board_info(1, am3517evm_i2c1_boardinfo,
                                 ARRAY_SIZE(am3517evm_i2c1_boardinfo));
         /*Ethernet*/
-        am3517_evm_ethernet_init(&am3517_evm_emac_pdata);
+        am35xx_emac_init(AM35XX_DEFAULT_MDIO_FREQUENCY, 1);
 
         /* MUSB */
         am3517_evm_musb_init();
diff --git a/arch/arm/mach-omap2/board-cm-t3517.c b/arch/arm/mach-omap2/board-cm-t3517.c
index f36d694d2159..9e66e167e4f3 100644
--- a/arch/arm/mach-omap2/board-cm-t3517.c
+++ b/arch/arm/mach-omap2/board-cm-t3517.c
@@ -49,6 +49,7 @@
 #include "mux.h"
 #include "control.h"
 #include "common-board-devices.h"
+#include "am35xx-emac.h"
 
 #if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
 static struct gpio_led cm_t3517_leds[] = {
@@ -291,6 +292,7 @@ static void __init cm_t3517_init(void)
         cm_t3517_init_rtc();
         cm_t3517_init_usbh();
         cm_t3517_init_hecc();
+        am35xx_emac_init(AM35XX_DEFAULT_MDIO_FREQUENCY, 1);
 }
 
 MACHINE_START(CM_T3517, "Compulab CM-T3517")
diff --git a/arch/arm/mach-omap2/board-omap3logic.c b/arch/arm/mach-omap2/board-omap3logic.c
index 2304ba340e99..4a7d8c8a75da 100644
--- a/arch/arm/mach-omap2/board-omap3logic.c
+++ b/arch/arm/mach-omap2/board-omap3logic.c
@@ -205,6 +205,7 @@ static void __init omap3logic_init(void)
 
 MACHINE_START(OMAP3_TORPEDO, "Logic OMAP3 Torpedo board")
         .atag_offset    = 0x100,
+        .reserve        = omap_reserve,
         .map_io         = omap3_map_io,
         .init_early     = omap35xx_init_early,
         .init_irq       = omap3_init_irq,
@@ -216,6 +217,7 @@ MACHINE_END
 
 MACHINE_START(OMAP3530_LV_SOM, "OMAP Logic 3530 LV SOM board")
         .atag_offset    = 0x100,
+        .reserve        = omap_reserve,
         .map_io         = omap3_map_io,
         .init_early     = omap35xx_init_early,
         .init_irq       = omap3_init_irq,
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index 7184b8b9e38f..33d995d0f075 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -121,6 +121,11 @@ static struct platform_device pandora_leds_gpio = {
         },
 };
 
+static struct platform_device pandora_backlight = {
+        .name   = "pandora-backlight",
+        .id     = -1,
+};
+
 #define GPIO_BUTTON(gpio_num, ev_type, ev_code, act_low, descr) \
 {                                                               \
         .gpio           = gpio_num,                             \
@@ -478,6 +483,10 @@ static struct platform_device pandora_vwlan_device = {
 
 static struct twl4030_bci_platform_data pandora_bci_data;
 
+static struct twl4030_power_data pandora_power_data = {
+        .use_poweroff   = true,
+};
+
 static struct twl4030_platform_data omap3pandora_twldata = {
         .gpio           = &omap3pandora_gpio_data,
         .vmmc1          = &pandora_vmmc1,
@@ -488,6 +497,7 @@ static struct twl4030_platform_data omap3pandora_twldata = {
         .vsim           = &pandora_vsim,
         .keypad         = &pandora_kp_data,
         .bci            = &pandora_bci_data,
+        .power          = &pandora_power_data,
 };
 
 static struct i2c_board_info __initdata omap3pandora_i2c3_boardinfo[] = {
@@ -559,6 +569,7 @@ static struct platform_device *omap3pandora_devices[] __initdata = {
         &pandora_leds_gpio,
         &pandora_keys_gpio,
         &pandora_vwlan_device,
+        &pandora_backlight,
 };
 
 static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
index 866411d4fe65..e9071a57c37b 100644
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -116,10 +116,16 @@ static struct platform_device panda_abe_audio = {
         },
 };
 
+static struct platform_device btwilink_device = {
+        .name   = "btwilink",
+        .id     = -1,
+};
+
 static struct platform_device *panda_devices[] __initdata = {
         &leds_gpio,
         &wl1271_device,
         &panda_abe_audio,
+        &btwilink_device,
 };
 
 static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
diff --git a/arch/arm/mach-omap2/board-rm680.c b/arch/arm/mach-omap2/board-rm680.c
index 2d24c98f3d45..ae53d71f0ce0 100644
--- a/arch/arm/mach-omap2/board-rm680.c
+++ b/arch/arm/mach-omap2/board-rm680.c
@@ -1,5 +1,5 @@
 /*
- * Board support file for Nokia RM-680.
+ * Board support file for Nokia RM-680/696.
  *
  * Copyright (C) 2010 Nokia
  *
@@ -154,3 +154,15 @@ MACHINE_START(NOKIA_RM680, "Nokia RM-680 board")
         .timer          = &omap3_timer,
         .restart        = omap_prcm_restart,
 MACHINE_END
+
+MACHINE_START(NOKIA_RM696, "Nokia RM-696 board")
+        .atag_offset    = 0x100,
+        .reserve        = omap_reserve,
+        .map_io         = omap3_map_io,
+        .init_early     = omap3630_init_early,
+        .init_irq       = omap3_init_irq,
+        .handle_irq     = omap3_intc_handle_irq,
+        .init_machine   = rm680_init,
+        .timer          = &omap3_timer,
+        .restart        = omap_prcm_restart,
+MACHINE_END
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index 0f65c3b202ac..16aebfb8a7ec 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -1102,6 +1102,11 @@ static struct tsc2005_platform_data tsc2005_pdata = {
         .esd_timeout_ms         = 8000,
 };
 
+static struct gpio rx51_tsc2005_gpios[] __initdata = {
+        { RX51_TSC2005_IRQ_GPIO,   GPIOF_IN,            "tsc2005 IRQ"   },
+        { RX51_TSC2005_RESET_GPIO, GPIOF_OUT_INIT_HIGH, "tsc2005 reset" },
+};
+
 static void rx51_tsc2005_set_reset(bool enable)
 {
         gpio_set_value(RX51_TSC2005_RESET_GPIO, enable);
@@ -1111,20 +1116,18 @@ static void __init rx51_init_tsc2005(void)
 {
         int r;
 
-        r = gpio_request_one(RX51_TSC2005_IRQ_GPIO, GPIOF_IN, "tsc2005 IRQ");
-        if (r < 0) {
-                printk(KERN_ERR "unable to get %s GPIO\n", "tsc2005 IRQ");
-                rx51_peripherals_spi_board_info[RX51_SPI_TSC2005].irq = 0;
-        }
+        omap_mux_init_gpio(RX51_TSC2005_RESET_GPIO, OMAP_PIN_OUTPUT);
+        omap_mux_init_gpio(RX51_TSC2005_IRQ_GPIO, OMAP_PIN_INPUT_PULLUP);
 
-        r = gpio_request_one(RX51_TSC2005_RESET_GPIO, GPIOF_OUT_INIT_HIGH,
-                "tsc2005 reset");
-        if (r >= 0) {
-                tsc2005_pdata.set_reset = rx51_tsc2005_set_reset;
-        } else {
-                printk(KERN_ERR "unable to get %s GPIO\n", "tsc2005 reset");
+        r = gpio_request_array(rx51_tsc2005_gpios,
+                               ARRAY_SIZE(rx51_tsc2005_gpios));
+        if (r < 0) {
+                printk(KERN_ERR "tsc2005 board initialization failed\n");
                 tsc2005_pdata.esd_timeout_ms = 0;
+                return;
         }
+
+        tsc2005_pdata.set_reset = rx51_tsc2005_set_reset;
 }
 
 void __init rx51_peripherals_init(void)
diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c
index 208eef1c0485..f309bf975202 100644
--- a/arch/arm/mach-pxa/hx4700.c
+++ b/arch/arm/mach-pxa/hx4700.c
@@ -97,9 +97,9 @@ static unsigned long hx4700_pin_config[] __initdata = {
 
         /* BTUART */
         GPIO42_BTUART_RXD,
-        GPIO43_BTUART_TXD,
+        GPIO43_BTUART_TXD_LPM_LOW,
         GPIO44_BTUART_CTS,
-        GPIO45_BTUART_RTS,
+        GPIO45_BTUART_RTS_LPM_LOW,
 
         /* PWM 1 (Backlight) */
         GPIO17_PWM1_OUT,
@@ -245,6 +245,21 @@ static u16 asic3_gpio_config[] = {
         ASIC3_GPIOD15_nPIOW,
 };
 
+static struct asic3_led asic3_leds[ASIC3_NUM_LEDS] = {
+        [0] = {
+                .name = "hx4700:amber",
+                .default_trigger = "ds2760-battery.0-charging-blink-full-solid",
+        },
+        [1] = {
+                .name = "hx4700:green",
+                .default_trigger = "unused",
+        },
+        [2] = {
+                .name = "hx4700:blue",
+                .default_trigger = "hx4700-radio",
+        },
+};
+
 static struct resource asic3_resources[] = {
         /* GPIO part */
         [0] = {
@@ -275,6 +290,7 @@ static struct asic3_platform_data asic3_platform_data = {
         .gpio_config_num = ARRAY_SIZE(asic3_gpio_config),
         .irq_base        = IRQ_BOARD_START,
         .gpio_base       = HX4700_ASIC3_GPIO_BASE,
+        .leds            = asic3_leds,
 };
 
 static struct platform_device asic3 = {
@@ -705,10 +721,9 @@ static void hx4700_set_vpp(struct platform_device *pdev, int vpp)
         gpio_set_value(GPIO91_HX4700_FLASH_VPEN, vpp);
 }
 
-static struct resource strataflash_resource = {
-        .start = PXA_CS0_PHYS,
-        .end   = PXA_CS0_PHYS + SZ_128M - 1,
-        .flags = IORESOURCE_MEM,
+static struct resource strataflash_resource[] = {
+        [0] = DEFINE_RES_MEM(PXA_CS0_PHYS, SZ_64M),
+        [1] = DEFINE_RES_MEM(PXA_CS0_PHYS + SZ_64M, SZ_64M),
 };
 
 static struct physmap_flash_data strataflash_data = {
@@ -719,8 +734,8 @@ static struct physmap_flash_data strataflash_data = {
 static struct platform_device strataflash = {
         .name          = "physmap-flash",
         .id            = -1,
-        .resource      = &strataflash_resource,
-        .num_resources = 1,
+        .resource      = strataflash_resource,
+        .num_resources = ARRAY_SIZE(strataflash_resource),
         .dev = {
                 .platform_data = &strataflash_data,
         },
@@ -788,17 +803,6 @@ static struct platform_device audio = {
 
 
 /*
- * PCMCIA
- */
-
-static struct platform_device pcmcia = {
-        .name = "hx4700-pcmcia",
-        .dev  = {
-                .parent = &asic3.dev,
-        },
-};
-
-/*
  * Platform devices
  */
 
@@ -814,7 +818,6 @@ static struct platform_device *devices[] __initdata = {
         &power_supply,
         &strataflash,
         &audio,
-        &pcmcia,
 };
 
 static struct gpio global_gpios[] = {
@@ -830,7 +833,6 @@ static struct gpio global_gpios[] = {
         { GPIO32_HX4700_RS232_ON,         GPIOF_OUT_INIT_HIGH, "RS232_ON" },
         { GPIO71_HX4700_ASIC3_nRESET,     GPIOF_OUT_INIT_HIGH, "ASIC3_nRESET" },
         { GPIO82_HX4700_EUART_RESET,      GPIOF_OUT_INIT_HIGH, "EUART_RESET" },
-        { GPIO105_HX4700_nIR_ON,          GPIOF_OUT_INIT_HIGH, "nIR_EN" },
 };
 
 static void __init hx4700_init(void)
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h b/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h
index ec0f0b0b6744..a65867209aa0 100644
--- a/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h
@@ -158,7 +158,9 @@
 #define GPIO44_BTUART_CTS       MFP_CFG_IN(GPIO44, AF1)
 #define GPIO42_BTUART_RXD       MFP_CFG_IN(GPIO42, AF1)
 #define GPIO45_BTUART_RTS       MFP_CFG_OUT(GPIO45, AF2, DRIVE_HIGH)
+#define GPIO45_BTUART_RTS_LPM_LOW       MFP_CFG_OUT(GPIO45, AF2, DRIVE_LOW)
 #define GPIO43_BTUART_TXD       MFP_CFG_OUT(GPIO43, AF2, DRIVE_HIGH)
+#define GPIO43_BTUART_TXD_LPM_LOW       MFP_CFG_OUT(GPIO43, AF2, DRIVE_LOW)
 
 /* STUART */
 #define GPIO46_STUART_RXD       MFP_CFG_IN(GPIO46, AF2)
diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig
index 326ea3a98725..82c0915729ee 100644
--- a/arch/arm/mach-s3c64xx/Kconfig
+++ b/arch/arm/mach-s3c64xx/Kconfig
@@ -304,5 +304,6 @@ config MACH_WLF_CRAGG_6410
         select S3C64XX_DEV_SPI0
         select SAMSUNG_GPIO_EXTRA128
         select I2C
+        select LEDS_GPIO_REGISTER
         help
           Machine support for the Wolfson Cragganmore S3C6410 variant.
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410-module.c b/arch/arm/mach-s3c64xx/mach-crag6410-module.c
index 32a30f38ba0c..b6a67728cc88 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410-module.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410-module.c
@@ -11,6 +11,7 @@
 #include <linux/export.h>
 #include <linux/interrupt.h>
 #include <linux/i2c.h>
+#include <linux/spi/spi.h>
 
 #include <linux/mfd/wm831x/irq.h>
 #include <linux/mfd/wm831x/gpio.h>
@@ -21,8 +22,25 @@
 #include <sound/wm8962.h>
 #include <sound/wm9081.h>
 
+#include <plat/s3c64xx-spi.h>
+
 #include <mach/crag6410.h>
 
+static struct s3c64xx_spi_csinfo wm0010_spi_csinfo = {
+        .set_level = gpio_set_value,
+        .line = S3C64XX_GPC(3),
+};
+
+static struct spi_board_info wm1253_devs[] = {
+        [0] = {
+                .modalias       = "wm0010",
+                .bus_num        = 0,
+                .chip_select    = 0,
+                .mode           = SPI_MODE_0,
+                .controller_data = &wm0010_spi_csinfo,
+        },
+};
+
 static struct wm5100_pdata wm5100_pdata = {
         .ldo_ena = S3C64XX_GPN(7),
         .irq_flags = IRQF_TRIGGER_HIGH,
@@ -159,14 +177,21 @@ static __devinitdata const struct {
         const char *name;
         const struct i2c_board_info *i2c_devs;
         int num_i2c_devs;
+        const struct spi_board_info *spi_devs;
+        int num_spi_devs;
 } gf_mods[] = {
         { .id = 0x01, .name = "1250-EV1 Springbank" },
         { .id = 0x02, .name = "1251-EV1 Jura" },
         { .id = 0x03, .name = "1252-EV1 Glenlivet" },
         { .id = 0x11, .name = "6249-EV2 Glenfarclas", },
+        { .id = 0x14, .name = "6271-EV1 Lochnagar" },
+        { .id = 0x15, .name = "XXXX-EV1 Bells" },
         { .id = 0x21, .name = "1275-EV1 Mortlach" },
         { .id = 0x25, .name = "1274-EV1 Glencadam" },
-        { .id = 0x31, .name = "1253-EV1 Tomatin", },
+        { .id = 0x31, .name = "1253-EV1 Tomatin",
+          .spi_devs = wm1253_devs, .num_spi_devs = ARRAY_SIZE(wm1253_devs) },
+        { .id = 0x32, .name = "XXXX-EV1 Caol Illa" },
+        { .id = 0x33, .name = "XXXX-EV1 Oban" },
         { .id = 0x39, .name = "1254-EV1 Dallas Dhu",
           .i2c_devs = wm1254_devs, .num_i2c_devs = ARRAY_SIZE(wm1254_devs) },
         { .id = 0x3a, .name = "1259-EV1 Tobermory",
@@ -198,12 +223,16 @@ static __devinit int wlf_gf_module_probe(struct i2c_client *i2c,
         if (i < ARRAY_SIZE(gf_mods)) {
                 dev_info(&i2c->dev, "%s revision %d\n",
                          gf_mods[i].name, rev + 1);
+
                 for (j = 0; j < gf_mods[i].num_i2c_devs; j++) {
                         if (!i2c_new_device(i2c->adapter,
                                             &(gf_mods[i].i2c_devs[j])))
                                 dev_err(&i2c->dev,
                                         "Failed to register dev: %d\n", ret);
                 }
+
+                spi_register_board_info(gf_mods[i].spi_devs,
+                                        gf_mods[i].num_spi_devs);
         } else {
                 dev_warn(&i2c->dev, "Unknown module ID 0x%x revision %d\n",
                          id, rev + 1);
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c
index 3b56bd9cb880..e20bf5835365 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410.c
@@ -19,7 +19,9 @@
 #include <linux/io.h>
 #include <linux/init.h>
 #include <linux/gpio.h>
+#include <linux/leds.h>
 #include <linux/delay.h>
+#include <linux/mmc/host.h>
 #include <linux/regulator/machine.h>
 #include <linux/regulator/fixed.h>
 #include <linux/pwm_backlight.h>
@@ -299,6 +301,7 @@ static struct platform_device littlemill_device = {
 };
 
 static struct regulator_consumer_supply wallvdd_consumers[] = {
+        REGULATOR_SUPPLY("SPKVDD", "1-001a"),
         REGULATOR_SUPPLY("SPKVDD1", "1-001a"),
         REGULATOR_SUPPLY("SPKVDD2", "1-001a"),
         REGULATOR_SUPPLY("SPKVDDL", "1-001a"),
@@ -575,11 +578,19 @@ static struct s3c2410_platform_i2c i2c0_pdata = {
         .frequency = 400000,
 };
 
+static struct regulator_consumer_supply pvdd_1v2_consumers[] __initdata = {
+        REGULATOR_SUPPLY("DCVDD", "spi0.0"),
+        REGULATOR_SUPPLY("AVDD", "spi0.0"),
+};
+
 static struct regulator_init_data pvdd_1v2 __initdata = {
         .constraints = {
                 .name = "PVDD_1V2",
-                .always_on = 1,
+                .valid_ops_mask = REGULATOR_CHANGE_STATUS,
         },
+
+        .consumer_supplies = pvdd_1v2_consumers,
+        .num_consumer_supplies = ARRAY_SIZE(pvdd_1v2_consumers),
 };
 
 static struct regulator_consumer_supply pvdd_1v8_consumers[] __initdata = {
@@ -593,6 +604,7 @@ static struct regulator_consumer_supply pvdd_1v8_consumers[] __initdata = {
         REGULATOR_SUPPLY("AVDD2", "1-001a"),
         REGULATOR_SUPPLY("DCVDD", "1-001a"),
         REGULATOR_SUPPLY("AVDD", "1-001a"),
+        REGULATOR_SUPPLY("DBVDD", "spi0.0"),
 };
 
 static struct regulator_init_data pvdd_1v8 __initdata = {
@@ -682,6 +694,7 @@ static void __init crag6410_map_io(void)
 static struct s3c_sdhci_platdata crag6410_hsmmc2_pdata = {
         .max_width              = 4,
         .cd_type                = S3C_SDHCI_CD_PERMANENT,
+        .host_caps              = MMC_CAP_POWER_OFF_CARD,
 };
 
 static void crag6410_cfg_sdhci0(struct platform_device *dev, int width)
@@ -697,6 +710,55 @@ static struct s3c_sdhci_platdata crag6410_hsmmc0_pdata = {
         .max_width              = 4,
         .cd_type                = S3C_SDHCI_CD_INTERNAL,
         .cfg_gpio               = crag6410_cfg_sdhci0,
+        .host_caps              = MMC_CAP_POWER_OFF_CARD,
+};
+
+static const struct gpio_led gpio_leds[] = {
+        {
+                .name = "d13:green:",
+                .gpio = MMGPIO_GPIO_BASE + 0,
+                .default_state = LEDS_GPIO_DEFSTATE_ON,
+        },
+        {
+                .name = "d14:green:",
+                .gpio = MMGPIO_GPIO_BASE + 1,
+                .default_state = LEDS_GPIO_DEFSTATE_ON,
+        },
+        {
+                .name = "d15:green:",
+                .gpio = MMGPIO_GPIO_BASE + 2,
+                .default_state = LEDS_GPIO_DEFSTATE_ON,
+        },
+        {
+                .name = "d16:green:",
+                .gpio = MMGPIO_GPIO_BASE + 3,
+                .default_state = LEDS_GPIO_DEFSTATE_ON,
+        },
+        {
+                .name = "d17:green:",
+                .gpio = MMGPIO_GPIO_BASE + 4,
+                .default_state = LEDS_GPIO_DEFSTATE_ON,
+        },
+        {
+                .name = "d18:green:",
+                .gpio = MMGPIO_GPIO_BASE + 5,
+                .default_state = LEDS_GPIO_DEFSTATE_ON,
+        },
+        {
+                .name = "d19:green:",
+                .gpio = MMGPIO_GPIO_BASE + 6,
+                .default_state = LEDS_GPIO_DEFSTATE_ON,
+        },
+        {
+                .name = "d20:green:",
+                .gpio = MMGPIO_GPIO_BASE + 7,
+                .default_state = LEDS_GPIO_DEFSTATE_ON,
+        },
+};
+
+static const struct gpio_led_platform_data gpio_leds_pdata = {
+        .leds = gpio_leds,
+        .num_leds = ARRAY_SIZE(gpio_leds),
 };
 
 static struct s3c_hsotg_plat crag6410_hsotg_pdata;
@@ -731,9 +793,12 @@ static void __init crag6410_machine_init(void)
         i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
 
         samsung_keypad_set_platdata(&crag6410_keypad_data);
+        s3c64xx_spi0_set_platdata(&s3c64xx_spi0_pdata, 0, 1);
 
         platform_add_devices(crag6410_devices, ARRAY_SIZE(crag6410_devices));
 
+        gpio_led_register_device(-1, &gpio_leds_pdata);
+
         regulator_has_full_constraints();
 
         s3c64xx_pm_init();
diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig
index 82525e3831e9..29594fc4fdf4 100644
--- a/arch/arm/mach-s5pv210/Kconfig
+++ b/arch/arm/mach-s5pv210/Kconfig
@@ -124,6 +124,10 @@ config MACH_SMDKC110
         select S3C_DEV_I2C2
         select S3C_DEV_RTC
         select S3C_DEV_WDT
+        select S5P_DEV_FIMC0
+        select S5P_DEV_FIMC1
+        select S5P_DEV_FIMC2
+        select S5P_DEV_MFC
         select SAMSUNG_DEV_IDE
         select S5PV210_SETUP_I2C1
         select S5PV210_SETUP_I2C2
@@ -148,6 +152,11 @@ config MACH_SMDKV210
         select S3C_DEV_I2C2
         select S3C_DEV_RTC
         select S3C_DEV_WDT
+        select S5P_DEV_FIMC0
+        select S5P_DEV_FIMC1
+        select S5P_DEV_FIMC2
+        select S5P_DEV_JPEG
+        select S5P_DEV_MFC
         select SAMSUNG_DEV_ADC
         select SAMSUNG_DEV_BACKLIGHT
         select SAMSUNG_DEV_IDE
diff --git a/arch/arm/mach-s5pv210/clock.c b/arch/arm/mach-s5pv210/clock.c
index b9ec0c35379f..09609d50961d 100644
--- a/arch/arm/mach-s5pv210/clock.c
+++ b/arch/arm/mach-s5pv210/clock.c
@@ -340,6 +340,11 @@ static struct clk init_clocks_off[] = {
                 .enable         = s5pv210_clk_ip0_ctrl,
                 .ctrlbit        = (1 << 26),
         }, {
+                .name           = "jpeg",
+                .parent         = &clk_hclk_dsys.clk,
+                .enable         = s5pv210_clk_ip0_ctrl,
+                .ctrlbit        = (1 << 28),
+        }, {
                 .name           = "mfc",
                 .devname        = "s5p-mfc",
                 .parent         = &clk_pclk_psys.clk,
diff --git a/arch/arm/mach-s5pv210/include/mach/map.h b/arch/arm/mach-s5pv210/include/mach/map.h
index 89c34b8f73bf..b7c8a1917ffc 100644
--- a/arch/arm/mach-s5pv210/include/mach/map.h
+++ b/arch/arm/mach-s5pv210/include/mach/map.h
@@ -90,6 +90,8 @@
 #define S5PV210_PA_FIMC1                0xFB300000
 #define S5PV210_PA_FIMC2                0xFB400000
 
+#define S5PV210_PA_JPEG                 0xFB600000
+
 #define S5PV210_PA_SDO                  0xF9000000
 #define S5PV210_PA_VP                   0xF9100000
 #define S5PV210_PA_MIXER                0xF9200000
@@ -132,6 +134,8 @@
 #define S5P_PA_SYSCON                   S5PV210_PA_SYSCON
 #define S5P_PA_TIMER                    S5PV210_PA_TIMER
 
+#define S5P_PA_JPEG                     S5PV210_PA_JPEG
+
 #define SAMSUNG_PA_ADC                  S5PV210_PA_ADC
 #define SAMSUNG_PA_CFCON                S5PV210_PA_CFCON
 #define SAMSUNG_PA_KEYPAD               S5PV210_PA_KEYPAD
diff --git a/arch/arm/mach-s5pv210/mach-aquila.c b/arch/arm/mach-s5pv210/mach-aquila.c
index 5e734d025a6a..a9ea64e0da0d 100644
--- a/arch/arm/mach-s5pv210/mach-aquila.c
+++ b/arch/arm/mach-s5pv210/mach-aquila.c
@@ -616,6 +616,7 @@ static struct platform_device *aquila_devices[] __initdata = {
         &s5p_device_fimc0,
         &s5p_device_fimc1,
         &s5p_device_fimc2,
+        &s5p_device_fimc_md,
         &s5pv210_device_iis0,
         &wm8994_fixed_voltage0,
         &wm8994_fixed_voltage1,
diff --git a/arch/arm/mach-s5pv210/mach-smdkc110.c b/arch/arm/mach-s5pv210/mach-smdkc110.c
index b323983b2c54..dfc29236321c 100644
--- a/arch/arm/mach-s5pv210/mach-smdkc110.c
+++ b/arch/arm/mach-s5pv210/mach-smdkc110.c
@@ -31,6 +31,7 @@
 #include <plat/iic.h>
 #include <plat/pm.h>
 #include <plat/s5p-time.h>
+#include <plat/mfc.h>
 
 #include "common.h"
 
@@ -94,6 +95,13 @@ static struct platform_device *smdkc110_devices[] __initdata = {
         &s3c_device_i2c2,
         &s3c_device_rtc,
         &s3c_device_wdt,
+        &s5p_device_fimc0,
+        &s5p_device_fimc1,
+        &s5p_device_fimc2,
+        &s5p_device_fimc_md,
+        &s5p_device_mfc,
+        &s5p_device_mfc_l,
+        &s5p_device_mfc_r,
 };
 
 static struct i2c_board_info smdkc110_i2c_devs0[] __initdata = {
@@ -117,6 +125,11 @@ static void __init smdkc110_map_io(void)
         s5p_set_timer_source(S5P_PWM3, S5P_PWM4);
 }
 
+static void __init smdkc110_reserve(void)
+{
+        s5p_mfc_reserve_mem(0x43000000, 8 << 20, 0x51000000, 8 << 20);
+}
+
 static void __init smdkc110_machine_init(void)
 {
         s3c_pm_init();
@@ -145,4 +158,5 @@ MACHINE_START(SMDKC110, "SMDKC110")
         .init_machine   = smdkc110_machine_init,
         .timer          = &s5p_timer,
         .restart        = s5pv210_restart,
+        .reserve        = &smdkc110_reserve,
 MACHINE_END
diff --git a/arch/arm/mach-s5pv210/mach-smdkv210.c b/arch/arm/mach-s5pv210/mach-smdkv210.c
index 0933c8e1eb7b..91d4ad8bcc73 100644
--- a/arch/arm/mach-s5pv210/mach-smdkv210.c
+++ b/arch/arm/mach-s5pv210/mach-smdkv210.c
@@ -46,6 +46,7 @@
 #include <plat/s5p-time.h>
 #include <plat/backlight.h>
 #include <plat/regs-fb-v4.h>
+#include <plat/mfc.h>
 
 #include "common.h"
 
@@ -223,6 +224,14 @@ static struct platform_device *smdkv210_devices[] __initdata = {
         &s3c_device_rtc,
         &s3c_device_ts,
         &s3c_device_wdt,
+        &s5p_device_fimc0,
+        &s5p_device_fimc1,
+        &s5p_device_fimc2,
+        &s5p_device_fimc_md,
+        &s5p_device_jpeg,
+        &s5p_device_mfc,
+        &s5p_device_mfc_l,
+        &s5p_device_mfc_r,
         &s5pv210_device_ac97,
         &s5pv210_device_iis0,
         &s5pv210_device_spdif,
@@ -282,6 +291,11 @@ static void __init smdkv210_map_io(void)
         s5p_set_timer_source(S5P_PWM2, S5P_PWM4);
 }
 
+static void __init smdkv210_reserve(void)
+{
+        s5p_mfc_reserve_mem(0x43000000, 8 << 20, 0x51000000, 8 << 20);
+}
+
 static void __init smdkv210_machine_init(void)
 {
         s3c_pm_init();
@@ -319,4 +333,5 @@ MACHINE_START(SMDKV210, "SMDKV210")
         .init_machine   = smdkv210_machine_init,
         .timer          = &s5p_timer,
         .restart        = s5pv210_restart,
+        .reserve        = &smdkv210_reserve,
 MACHINE_END
diff --git a/arch/arm/mach-tegra/board-dt-tegra20.c b/arch/arm/mach-tegra/board-dt-tegra20.c
index 7a95e0bc4aba..e20b419d5983 100644
--- a/arch/arm/mach-tegra/board-dt-tegra20.c
+++ b/arch/arm/mach-tegra/board-dt-tegra20.c
@@ -131,11 +131,7 @@ static void __init tegra_dt_init(void)
 }
 
 static const char *tegra20_dt_board_compat[] = {
-        "compulab,trimslice",
-        "nvidia,harmony",
-        "compal,paz00",
-        "nvidia,seaboard",
-        "nvidia,ventana",
+        "nvidia,tegra20",
         NULL
 };
 
diff --git a/arch/arm/mach-tegra/board-dt-tegra30.c b/arch/arm/mach-tegra/board-dt-tegra30.c
index b4124b12a779..96f6c0d030bd 100644
--- a/arch/arm/mach-tegra/board-dt-tegra30.c
+++ b/arch/arm/mach-tegra/board-dt-tegra30.c
@@ -69,7 +69,7 @@ static void __init tegra30_dt_init(void)
 }
 
 static const char *tegra30_dt_board_compat[] = {
-        "nvidia,cardhu",
+        "nvidia,tegra30",
         NULL
 };
 
diff --git a/arch/arm/mach-tegra/board-harmony-power.c b/arch/arm/mach-tegra/board-harmony-power.c
index 21d1285731b3..c0298b3f7d63 100644
--- a/arch/arm/mach-tegra/board-harmony-power.c
+++ b/arch/arm/mach-tegra/board-harmony-power.c
@@ -36,13 +36,14 @@ static struct regulator_consumer_supply tps658621_ldo0_supply[] = {
 
 static struct regulator_init_data ldo0_data = {
         .constraints = {
-                .min_uV = 1250 * 1000,
+                .min_uV = 3300 * 1000,
                 .max_uV = 3300 * 1000,
                 .valid_modes_mask = (REGULATOR_MODE_NORMAL |
                                      REGULATOR_MODE_STANDBY),
                 .valid_ops_mask = (REGULATOR_CHANGE_MODE |
                                    REGULATOR_CHANGE_STATUS |
                                    REGULATOR_CHANGE_VOLTAGE),
+                .apply_uV = 1,
         },
         .num_consumer_supplies = ARRAY_SIZE(tps658621_ldo0_supply),
         .consumer_supplies = tps658621_ldo0_supply,
diff --git a/arch/arm/plat-omap/include/plat/board-ams-delta.h b/arch/arm/plat-omap/include/plat/board-ams-delta.h
index 51b102dc906b..ad6f865d1f16 100644
--- a/arch/arm/plat-omap/include/plat/board-ams-delta.h
+++ b/arch/arm/plat-omap/include/plat/board-ams-delta.h
@@ -28,33 +28,8 @@
 
 #if defined (CONFIG_MACH_AMS_DELTA)
 
-#define AMS_DELTA_LATCH1_PHYS           0x01000000
-#define AMS_DELTA_LATCH1_VIRT           0xEA000000
-#define AMS_DELTA_MODEM_PHYS            0x04000000
-#define AMS_DELTA_MODEM_VIRT            0xEB000000
-#define AMS_DELTA_LATCH2_PHYS           0x08000000
-#define AMS_DELTA_LATCH2_VIRT           0xEC000000
-
-#define AMS_DELTA_LATCH1_LED_CAMERA     0x01
-#define AMS_DELTA_LATCH1_LED_ADVERT     0x02
-#define AMS_DELTA_LATCH1_LED_EMAIL      0x04
-#define AMS_DELTA_LATCH1_LED_HANDSFREE  0x08
-#define AMS_DELTA_LATCH1_LED_VOICEMAIL  0x10
-#define AMS_DELTA_LATCH1_LED_VOICE      0x20
-
-#define AMS_DELTA_LATCH2_LCD_VBLEN      0x0001
-#define AMS_DELTA_LATCH2_LCD_NDISP      0x0002
-#define AMS_DELTA_LATCH2_NAND_NCE       0x0004
-#define AMS_DELTA_LATCH2_NAND_NRE       0x0008
-#define AMS_DELTA_LATCH2_NAND_NWP       0x0010
-#define AMS_DELTA_LATCH2_NAND_NWE       0x0020
-#define AMS_DELTA_LATCH2_NAND_ALE       0x0040
-#define AMS_DELTA_LATCH2_NAND_CLE       0x0080
-#define AMD_DELTA_LATCH2_KEYBRD_PWR     0x0100
-#define AMD_DELTA_LATCH2_KEYBRD_DATA    0x0200
 #define AMD_DELTA_LATCH2_SCARD_RSTIN    0x0400
 #define AMD_DELTA_LATCH2_SCARD_CMDVCC   0x0800
-#define AMS_DELTA_LATCH2_MODEM_NRESET   0x1000
 #define AMS_DELTA_LATCH2_MODEM_CODEC    0x2000
 
 #define AMS_DELTA_GPIO_PIN_KEYBRD_DATA  0
@@ -66,9 +41,29 @@
 #define AMS_DELTA_GPIO_PIN_CONFIG       11
 #define AMS_DELTA_GPIO_PIN_NAND_RB      12
 
+#define AMS_DELTA_GPIO_PIN_LCD_VBLEN            240
+#define AMS_DELTA_GPIO_PIN_LCD_NDISP            241
+#define AMS_DELTA_GPIO_PIN_NAND_NCE             242
+#define AMS_DELTA_GPIO_PIN_NAND_NRE             243
+#define AMS_DELTA_GPIO_PIN_NAND_NWP             244
+#define AMS_DELTA_GPIO_PIN_NAND_NWE             245
+#define AMS_DELTA_GPIO_PIN_NAND_ALE             246
+#define AMS_DELTA_GPIO_PIN_NAND_CLE             247
+#define AMS_DELTA_GPIO_PIN_KEYBRD_PWR           248
+#define AMS_DELTA_GPIO_PIN_KEYBRD_DATAOUT       249
+#define AMS_DELTA_GPIO_PIN_SCARD_RSTIN          250
+#define AMS_DELTA_GPIO_PIN_SCARD_CMDVCC         251
+#define AMS_DELTA_GPIO_PIN_MODEM_NRESET         252
+#define AMS_DELTA_GPIO_PIN_MODEM_CODEC          253
+
+#define AMS_DELTA_LATCH2_GPIO_BASE      AMS_DELTA_GPIO_PIN_LCD_VBLEN
+#define AMS_DELTA_LATCH2_NGPIO          16
+
 #ifndef __ASSEMBLY__
-void ams_delta_latch1_write(u8 mask, u8 value);
-void ams_delta_latch2_write(u16 mask, u16 value);
+void ams_delta_latch_write(int base, int ngpio, u16 mask, u16 value);
+#define ams_delta_latch2_write(mask, value) \
+        ams_delta_latch_write(AMS_DELTA_LATCH2_GPIO_BASE, \
+                        AMS_DELTA_LATCH2_NGPIO, (mask), (value))
 #endif
 
 #endif /* CONFIG_MACH_AMS_DELTA */
diff --git a/arch/arm/plat-omap/include/plat/uncompress.h b/arch/arm/plat-omap/include/plat/uncompress.h
index 6ee90495ca4c..cc3f11ba7a99 100644
--- a/arch/arm/plat-omap/include/plat/uncompress.h
+++ b/arch/arm/plat-omap/include/plat/uncompress.h
@@ -160,6 +160,7 @@ static inline void __arch_decomp_setup(unsigned long arch_id)
                 DEBUG_LL_OMAP3(3, igep0020);
                 DEBUG_LL_OMAP3(3, igep0030);
                 DEBUG_LL_OMAP3(3, nokia_rm680);
+                DEBUG_LL_OMAP3(3, nokia_rm696);
                 DEBUG_LL_OMAP3(3, nokia_rx51);
                 DEBUG_LL_OMAP3(3, omap3517evm);
                 DEBUG_LL_OMAP3(3, omap3_beagle);