1 files changed, 276 insertions, 0 deletions

diff --git a/arch/arm/plat-s3c24xx/s3c2410-clock.c b/arch/arm/plat-s3c24xx/s3c2410-clock.c
new file mode 100644
index 000000000000..4e07943c1e29
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/s3c2410-clock.c
@@ -0,0 +1,276 @@
+/* linux/arch/arm/mach-s3c2410/clock.c
+ *
+ * Copyright (c) 2006 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410,S3C2440,S3C2442 Clock control support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/sysdev.h>
+#include <linux/clk.h>
+#include <linux/mutex.h>
+#include <linux/delay.h>
+#include <linux/serial_core.h>
+#include <linux/io.h>
+
+#include <asm/mach/map.h>
+
+#include <mach/hardware.h>
+
+#include <plat/regs-serial.h>
+#include <mach/regs-clock.h>
+#include <mach/regs-gpio.h>
+
+#include <plat/s3c2410.h>
+#include <plat/clock.h>
+#include <plat/cpu.h>
+
+int s3c2410_clkcon_enable(struct clk *clk, int enable)
+{
+        unsigned int clocks = clk->ctrlbit;
+        unsigned long clkcon;
+
+        clkcon = __raw_readl(S3C2410_CLKCON);
+
+        if (enable)
+                clkcon |= clocks;
+        else
+                clkcon &= ~clocks;
+
+        /* ensure none of the special function bits set */
+        clkcon &= ~(S3C2410_CLKCON_IDLE|S3C2410_CLKCON_POWER);
+
+        __raw_writel(clkcon, S3C2410_CLKCON);
+
+        return 0;
+}
+
+static int s3c2410_upll_enable(struct clk *clk, int enable)
+{
+        unsigned long clkslow = __raw_readl(S3C2410_CLKSLOW);
+        unsigned long orig = clkslow;
+
+        if (enable)
+                clkslow &= ~S3C2410_CLKSLOW_UCLK_OFF;
+        else
+                clkslow |= S3C2410_CLKSLOW_UCLK_OFF;
+
+        __raw_writel(clkslow, S3C2410_CLKSLOW);
+
+        /* if we started the UPLL, then allow to settle */
+
+        if (enable && (orig & S3C2410_CLKSLOW_UCLK_OFF))
+                udelay(200);
+
+        return 0;
+}
+
+/* standard clock definitions */
+
+static struct clk init_clocks_disable[] = {
+        {
+                .name           = "nand",
+                .id             = -1,
+                .parent         = &clk_h,
+                .enable         = s3c2410_clkcon_enable,
+                .ctrlbit        = S3C2410_CLKCON_NAND,
+        }, {
+                .name           = "sdi",
+                .id             = -1,
+                .parent         = &clk_p,
+                .enable         = s3c2410_clkcon_enable,
+                .ctrlbit        = S3C2410_CLKCON_SDI,
+        }, {
+                .name           = "adc",
+                .id             = -1,
+                .parent         = &clk_p,
+                .enable         = s3c2410_clkcon_enable,
+                .ctrlbit        = S3C2410_CLKCON_ADC,
+        }, {
+                .name           = "i2c",
+                .id             = -1,
+                .parent         = &clk_p,
+                .enable         = s3c2410_clkcon_enable,
+                .ctrlbit        = S3C2410_CLKCON_IIC,
+        }, {
+                .name           = "iis",
+                .id             = -1,
+                .parent         = &clk_p,
+                .enable         = s3c2410_clkcon_enable,
+                .ctrlbit        = S3C2410_CLKCON_IIS,
+        }, {
+                .name           = "spi",
+                .id             = -1,
+                .parent         = &clk_p,
+                .enable         = s3c2410_clkcon_enable,
+                .ctrlbit        = S3C2410_CLKCON_SPI,
+        }
+};
+
+static struct clk init_clocks[] = {
+        {
+                .name           = "lcd",
+                .id             = -1,
+                .parent         = &clk_h,
+                .enable         = s3c2410_clkcon_enable,
+                .ctrlbit        = S3C2410_CLKCON_LCDC,
+        }, {
+                .name           = "gpio",
+                .id             = -1,
+                .parent         = &clk_p,
+                .enable         = s3c2410_clkcon_enable,
+                .ctrlbit        = S3C2410_CLKCON_GPIO,
+        }, {
+                .name           = "usb-host",
+                .id             = -1,
+                .parent         = &clk_h,
+                .enable         = s3c2410_clkcon_enable,
+                .ctrlbit        = S3C2410_CLKCON_USBH,
+        }, {
+                .name           = "usb-device",
+                .id             = -1,
+                .parent         = &clk_h,
+                .enable         = s3c2410_clkcon_enable,
+                .ctrlbit        = S3C2410_CLKCON_USBD,
+        }, {
+                .name           = "timers",
+                .id             = -1,
+                .parent         = &clk_p,
+                .enable         = s3c2410_clkcon_enable,
+                .ctrlbit        = S3C2410_CLKCON_PWMT,
+        }, {
+                .name           = "uart",
+                .id             = 0,
+                .parent         = &clk_p,
+                .enable         = s3c2410_clkcon_enable,
+                .ctrlbit        = S3C2410_CLKCON_UART0,
+        }, {
+                .name           = "uart",
+                .id             = 1,
+                .parent         = &clk_p,
+                .enable         = s3c2410_clkcon_enable,
+                .ctrlbit        = S3C2410_CLKCON_UART1,
+        }, {
+                .name           = "uart",
+                .id             = 2,
+                .parent         = &clk_p,
+                .enable         = s3c2410_clkcon_enable,
+                .ctrlbit        = S3C2410_CLKCON_UART2,
+        }, {
+                .name           = "rtc",
+                .id             = -1,
+                .parent         = &clk_p,
+                .enable         = s3c2410_clkcon_enable,
+                .ctrlbit        = S3C2410_CLKCON_RTC,
+        }, {
+                .name           = "watchdog",
+                .id             = -1,
+                .parent         = &clk_p,
+                .ctrlbit        = 0,
+        }, {
+                .name           = "usb-bus-host",
+                .id             = -1,
+                .parent         = &clk_usb_bus,
+        }, {
+                .name           = "usb-bus-gadget",
+                .id             = -1,
+                .parent         = &clk_usb_bus,
+        },
+};
+
+/* s3c2410_baseclk_add()
+ *
+ * Add all the clocks used by the s3c2410 or compatible CPUs
+ * such as the S3C2440 and S3C2442.
+ *
+ * We cannot use a system device as we are needed before any
+ * of the init-calls that initialise the devices are actually
+ * done.
+*/
+
+int __init s3c2410_baseclk_add(void)
+{
+        unsigned long clkslow = __raw_readl(S3C2410_CLKSLOW);
+        unsigned long clkcon  = __raw_readl(S3C2410_CLKCON);
+        struct clk *clkp;
+        struct clk *xtal;
+        int ret;
+        int ptr;
+
+        clk_upll.enable = s3c2410_upll_enable;
+
+        if (s3c24xx_register_clock(&clk_usb_bus) < 0)
+                printk(KERN_ERR "failed to register usb bus clock\n");
+
+        /* register clocks from clock array */
+
+        clkp = init_clocks;
+        for (ptr = 0; ptr < ARRAY_SIZE(init_clocks); ptr++, clkp++) {
+                /* ensure that we note the clock state */
+
+                clkp->usage = clkcon & clkp->ctrlbit ? 1 : 0;
+
+                ret = s3c24xx_register_clock(clkp);
+                if (ret < 0) {
+                        printk(KERN_ERR "Failed to register clock %s (%d)\n",
+                               clkp->name, ret);
+                }
+        }
+
+        /* We must be careful disabling the clocks we are not intending to
+         * be using at boot time, as subsystems such as the LCD which do
+         * their own DMA requests to the bus can cause the system to lockup
+         * if they where in the middle of requesting bus access.
+         *
+         * Disabling the LCD clock if the LCD is active is very dangerous,
+         * and therefore the bootloader should be careful to not enable
+         * the LCD clock if it is not needed.
+        */
+
+        /* install (and disable) the clocks we do not need immediately */
+
+        clkp = init_clocks_disable;
+        for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) {
+
+                ret = s3c24xx_register_clock(clkp);
+                if (ret < 0) {
+                        printk(KERN_ERR "Failed to register clock %s (%d)\n",
+                               clkp->name, ret);
+                }
+
+                s3c2410_clkcon_enable(clkp, 0);
+        }
+
+        /* show the clock-slow value */
+
+        xtal = clk_get(NULL, "xtal");
+
+        printk("CLOCK: Slow mode (%ld.%ld MHz), %s, MPLL %s, UPLL %s\n",
+               print_mhz(clk_get_rate(xtal) /
+                         ( 2 * S3C2410_CLKSLOW_GET_SLOWVAL(clkslow))),
+               (clkslow & S3C2410_CLKSLOW_SLOW) ? "slow" : "fast",
+               (clkslow & S3C2410_CLKSLOW_MPLL_OFF) ? "off" : "on",
+               (clkslow & S3C2410_CLKSLOW_UCLK_OFF) ? "off" : "on");
+
+        return 0;
+}