1 files changed, 95 insertions, 32 deletions

diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index 3d03337ad422..50b19a3027bc 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -476,14 +476,12 @@ static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable)
         __raw_writel(l, reg);
 }
 
-static int __omap_get_gpio_datain(int gpio)
+static int _get_gpio_datain(struct gpio_bank *bank, int gpio)
 {
-        struct gpio_bank *bank;
         void __iomem *reg;
 
         if (check_gpio(gpio) < 0)
                 return -EINVAL;
-        bank = get_gpio_bank(gpio);
         reg = bank->base;
         switch (bank->method) {
 #ifdef CONFIG_ARCH_OMAP1
@@ -524,6 +522,53 @@ static int __omap_get_gpio_datain(int gpio)
                         & (1 << get_gpio_index(gpio))) != 0;
 }
 
+static int _get_gpio_dataout(struct gpio_bank *bank, int gpio)
+{
+        void __iomem *reg;
+
+        if (check_gpio(gpio) < 0)
+                return -EINVAL;
+        reg = bank->base;
+
+        switch (bank->method) {
+#ifdef CONFIG_ARCH_OMAP1
+        case METHOD_MPUIO:
+                reg += OMAP_MPUIO_OUTPUT;
+                break;
+#endif
+#ifdef CONFIG_ARCH_OMAP15XX
+        case METHOD_GPIO_1510:
+                reg += OMAP1510_GPIO_DATA_OUTPUT;
+                break;
+#endif
+#ifdef CONFIG_ARCH_OMAP16XX
+        case METHOD_GPIO_1610:
+                reg += OMAP1610_GPIO_DATAOUT;
+                break;
+#endif
+#ifdef CONFIG_ARCH_OMAP730
+        case METHOD_GPIO_730:
+                reg += OMAP730_GPIO_DATA_OUTPUT;
+                break;
+#endif
+#ifdef CONFIG_ARCH_OMAP850
+        case METHOD_GPIO_850:
+                reg += OMAP850_GPIO_DATA_OUTPUT;
+                break;
+#endif
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+                defined(CONFIG_ARCH_OMAP4)
+        case METHOD_GPIO_24XX:
+                reg += OMAP24XX_GPIO_DATAOUT;
+                break;
+#endif
+        default:
+                return -EINVAL;
+        }
+
+        return (__raw_readl(reg) & (1 << get_gpio_index(gpio))) != 0;
+}
+
 #define MOD_REG_BIT(reg, bit_mask, set) \
 do {    \
         int l = __raw_readl(base + reg); \
@@ -1189,6 +1234,7 @@ static void gpio_mask_irq(unsigned int irq)
         struct gpio_bank *bank = get_irq_chip_data(irq);
 
         _set_gpio_irqenable(bank, gpio, 0);
+        _set_gpio_triggering(bank, get_gpio_index(gpio), IRQ_TYPE_NONE);
 }
 
 static void gpio_unmask_irq(unsigned int irq)
@@ -1196,6 +1242,11 @@ static void gpio_unmask_irq(unsigned int irq)
         unsigned int gpio = irq - IH_GPIO_BASE;
         struct gpio_bank *bank = get_irq_chip_data(irq);
         unsigned int irq_mask = 1 << get_gpio_index(gpio);
+        struct irq_desc *desc = irq_to_desc(irq);
+        u32 trigger = desc->status & IRQ_TYPE_SENSE_MASK;
+
+        if (trigger)
+                _set_gpio_triggering(bank, get_gpio_index(gpio), trigger);
 
         /* For level-triggered GPIOs, the clearing must be done after
          * the HW source is cleared, thus after the handler has run */
@@ -1356,9 +1407,49 @@ static int gpio_input(struct gpio_chip *chip, unsigned offset)
         return 0;
 }
 
+static int gpio_is_input(struct gpio_bank *bank, int mask)
+{
+        void __iomem *reg = bank->base;
+
+        switch (bank->method) {
+        case METHOD_MPUIO:
+                reg += OMAP_MPUIO_IO_CNTL;
+                break;
+        case METHOD_GPIO_1510:
+                reg += OMAP1510_GPIO_DIR_CONTROL;
+                break;
+        case METHOD_GPIO_1610:
+                reg += OMAP1610_GPIO_DIRECTION;
+                break;
+        case METHOD_GPIO_730:
+                reg += OMAP730_GPIO_DIR_CONTROL;
+                break;
+        case METHOD_GPIO_850:
+                reg += OMAP850_GPIO_DIR_CONTROL;
+                break;
+        case METHOD_GPIO_24XX:
+                reg += OMAP24XX_GPIO_OE;
+                break;
+        }
+        return __raw_readl(reg) & mask;
+}
+
 static int gpio_get(struct gpio_chip *chip, unsigned offset)
 {
-        return __omap_get_gpio_datain(chip->base + offset);
+        struct gpio_bank *bank;
+        void __iomem *reg;
+        int gpio;
+        u32 mask;
+
+        gpio = chip->base + offset;
+        bank = get_gpio_bank(gpio);
+        reg = bank->base;
+        mask = 1 << get_gpio_index(gpio);
+
+        if (gpio_is_input(bank, mask))
+                return _get_gpio_datain(bank, gpio);
+        else
+                return _get_gpio_dataout(bank, gpio);
 }
 
 static int gpio_output(struct gpio_chip *chip, unsigned offset, int value)
@@ -1892,34 +1983,6 @@ arch_initcall(omap_gpio_sysinit);
 #include <linux/debugfs.h>
 #include <linux/seq_file.h>
 
-static int gpio_is_input(struct gpio_bank *bank, int mask)
-{
-        void __iomem *reg = bank->base;
-
-        switch (bank->method) {
-        case METHOD_MPUIO:
-                reg += OMAP_MPUIO_IO_CNTL;
-                break;
-        case METHOD_GPIO_1510:
-                reg += OMAP1510_GPIO_DIR_CONTROL;
-                break;
-        case METHOD_GPIO_1610:
-                reg += OMAP1610_GPIO_DIRECTION;
-                break;
-        case METHOD_GPIO_730:
-                reg += OMAP730_GPIO_DIR_CONTROL;
-                break;
-        case METHOD_GPIO_850:
-                reg += OMAP850_GPIO_DIR_CONTROL;
-                break;
-        case METHOD_GPIO_24XX:
-                reg += OMAP24XX_GPIO_OE;
-                break;
-        }
-        return __raw_readl(reg) & mask;
-}
-
-
 static int dbg_gpio_show(struct seq_file *s, void *unused)
 {
         unsigned        i, j, gpio;