1 files changed, 105 insertions, 6 deletions

diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index f856a90b264e..d3fa41e3d8c5 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -81,6 +81,22 @@
 #define OMAP730_GPIO_INT_STATUS         0x14
 
 /*
+ * OMAP850 specific GPIO registers
+ */
+#define OMAP850_GPIO1_BASE              IO_ADDRESS(0xfffbc000)
+#define OMAP850_GPIO2_BASE              IO_ADDRESS(0xfffbc800)
+#define OMAP850_GPIO3_BASE              IO_ADDRESS(0xfffbd000)
+#define OMAP850_GPIO4_BASE              IO_ADDRESS(0xfffbd800)
+#define OMAP850_GPIO5_BASE              IO_ADDRESS(0xfffbe000)
+#define OMAP850_GPIO6_BASE              IO_ADDRESS(0xfffbe800)
+#define OMAP850_GPIO_DATA_INPUT         0x00
+#define OMAP850_GPIO_DATA_OUTPUT        0x04
+#define OMAP850_GPIO_DIR_CONTROL        0x08
+#define OMAP850_GPIO_INT_CONTROL        0x0c
+#define OMAP850_GPIO_INT_MASK           0x10
+#define OMAP850_GPIO_INT_STATUS         0x14
+
+/*
  * omap24xx specific GPIO registers
  */
 #define OMAP242X_GPIO1_BASE             IO_ADDRESS(0x48018000)
@@ -159,7 +175,8 @@ struct gpio_bank {
 #define METHOD_GPIO_1510        1
 #define METHOD_GPIO_1610        2
 #define METHOD_GPIO_730         3
-#define METHOD_GPIO_24XX        4
+#define METHOD_GPIO_850         4
+#define METHOD_GPIO_24XX        5
 
 #ifdef CONFIG_ARCH_OMAP16XX
 static struct gpio_bank gpio_bank_1610[5] = {
@@ -190,6 +207,19 @@ static struct gpio_bank gpio_bank_730[7] = {
 };
 #endif
 
+#ifdef CONFIG_ARCH_OMAP850
+static struct gpio_bank gpio_bank_850[7] = {
+        { OMAP_MPUIO_BASE,     INT_850_MPUIO,       IH_MPUIO_BASE,      METHOD_MPUIO },
+        { OMAP850_GPIO1_BASE,  INT_850_GPIO_BANK1,  IH_GPIO_BASE,       METHOD_GPIO_850 },
+        { OMAP850_GPIO2_BASE,  INT_850_GPIO_BANK2,  IH_GPIO_BASE + 32,  METHOD_GPIO_850 },
+        { OMAP850_GPIO3_BASE,  INT_850_GPIO_BANK3,  IH_GPIO_BASE + 64,  METHOD_GPIO_850 },
+        { OMAP850_GPIO4_BASE,  INT_850_GPIO_BANK4,  IH_GPIO_BASE + 96,  METHOD_GPIO_850 },
+        { OMAP850_GPIO5_BASE,  INT_850_GPIO_BANK5,  IH_GPIO_BASE + 128, METHOD_GPIO_850 },
+        { OMAP850_GPIO6_BASE,  INT_850_GPIO_BANK6,  IH_GPIO_BASE + 160, METHOD_GPIO_850 },
+};
+#endif
+
+
 #ifdef CONFIG_ARCH_OMAP24XX
 
 static struct gpio_bank gpio_bank_242x[4] = {
@@ -236,7 +266,7 @@ static inline struct gpio_bank *get_gpio_bank(int gpio)
                         return &gpio_bank[0];
                 return &gpio_bank[1 + (gpio >> 4)];
         }
-        if (cpu_is_omap730()) {
+        if (cpu_is_omap7xx()) {
                 if (OMAP_GPIO_IS_MPUIO(gpio))
                         return &gpio_bank[0];
                 return &gpio_bank[1 + (gpio >> 5)];
@@ -251,7 +281,7 @@ static inline struct gpio_bank *get_gpio_bank(int gpio)
 
 static inline int get_gpio_index(int gpio)
 {
-        if (cpu_is_omap730())
+        if (cpu_is_omap7xx())
                 return gpio & 0x1f;
         if (cpu_is_omap24xx())
                 return gpio & 0x1f;
@@ -273,7 +303,7 @@ static inline int gpio_valid(int gpio)
                 return 0;
         if ((cpu_is_omap16xx()) && gpio < 64)
                 return 0;
-        if (cpu_is_omap730() && gpio < 192)
+        if (cpu_is_omap7xx() && gpio < 192)
                 return 0;
         if (cpu_is_omap24xx() && gpio < 128)
                 return 0;
@@ -318,6 +348,11 @@ static void _set_gpio_direction(struct gpio_bank *bank, int gpio, int is_input)
                 reg += OMAP730_GPIO_DIR_CONTROL;
                 break;
 #endif
+#ifdef CONFIG_ARCH_OMAP850
+        case METHOD_GPIO_850:
+                reg += OMAP850_GPIO_DIR_CONTROL;
+                break;
+#endif
 #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
         case METHOD_GPIO_24XX:
                 reg += OMAP24XX_GPIO_OE;
@@ -380,6 +415,16 @@ static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable)
                         l &= ~(1 << gpio);
                 break;
 #endif
+#ifdef CONFIG_ARCH_OMAP850
+        case METHOD_GPIO_850:
+                reg += OMAP850_GPIO_DATA_OUTPUT;
+                l = __raw_readl(reg);
+                if (enable)
+                        l |= 1 << gpio;
+                else
+                        l &= ~(1 << gpio);
+                break;
+#endif
 #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
         case METHOD_GPIO_24XX:
                 if (enable)
@@ -426,6 +471,11 @@ static int __omap_get_gpio_datain(int gpio)
                 reg += OMAP730_GPIO_DATA_INPUT;
                 break;
 #endif
+#ifdef CONFIG_ARCH_OMAP850
+        case METHOD_GPIO_850:
+                reg += OMAP850_GPIO_DATA_INPUT;
+                break;
+#endif
 #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
         case METHOD_GPIO_24XX:
                 reg += OMAP24XX_GPIO_DATAIN;
@@ -598,6 +648,18 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger)
                         goto bad;
                 break;
 #endif
+#ifdef CONFIG_ARCH_OMAP850
+        case METHOD_GPIO_850:
+                reg += OMAP850_GPIO_INT_CONTROL;
+                l = __raw_readl(reg);
+                if (trigger & IRQ_TYPE_EDGE_RISING)
+                        l |= 1 << gpio;
+                else if (trigger & IRQ_TYPE_EDGE_FALLING)
+                        l &= ~(1 << gpio);
+                else
+                        goto bad;
+                break;
+#endif
 #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
         case METHOD_GPIO_24XX:
                 set_24xx_gpio_triggering(bank, gpio, trigger);
@@ -678,6 +740,11 @@ static void _clear_gpio_irqbank(struct gpio_bank *bank, int gpio_mask)
                 reg += OMAP730_GPIO_INT_STATUS;
                 break;
 #endif
+#ifdef CONFIG_ARCH_OMAP850
+        case METHOD_GPIO_850:
+                reg += OMAP850_GPIO_INT_STATUS;
+                break;
+#endif
 #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
         case METHOD_GPIO_24XX:
                 reg += OMAP24XX_GPIO_IRQSTATUS1;
@@ -736,6 +803,13 @@ static u32 _get_gpio_irqbank_mask(struct gpio_bank *bank)
                 inv = 1;
                 break;
 #endif
+#ifdef CONFIG_ARCH_OMAP850
+        case METHOD_GPIO_850:
+                reg += OMAP850_GPIO_INT_MASK;
+                mask = 0xffffffff;
+                inv = 1;
+                break;
+#endif
 #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
         case METHOD_GPIO_24XX:
                 reg += OMAP24XX_GPIO_IRQENABLE1;
@@ -799,6 +873,16 @@ static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask, int enab
                         l |= gpio_mask;
                 break;
 #endif
+#ifdef CONFIG_ARCH_OMAP850
+        case METHOD_GPIO_850:
+                reg += OMAP850_GPIO_INT_MASK;
+                l = __raw_readl(reg);
+                if (enable)
+                        l &= ~(gpio_mask);
+                else
+                        l |= gpio_mask;
+                break;
+#endif
 #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
         case METHOD_GPIO_24XX:
                 if (enable)
@@ -983,6 +1067,10 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
         if (bank->method == METHOD_GPIO_730)
                 isr_reg = bank->base + OMAP730_GPIO_INT_STATUS;
 #endif
+#ifdef CONFIG_ARCH_OMAP850
+        if (bank->method == METHOD_GPIO_850)
+                isr_reg = bank->base + OMAP850_GPIO_INT_STATUS;
+#endif
 #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
         if (bank->method == METHOD_GPIO_24XX)
                 isr_reg = bank->base + OMAP24XX_GPIO_IRQSTATUS1;
@@ -1372,6 +1460,13 @@ static int __init _omap_gpio_init(void)
                 gpio_bank = gpio_bank_730;
         }
 #endif
+#ifdef CONFIG_ARCH_OMAP850
+        if (cpu_is_omap850()) {
+                printk(KERN_INFO "OMAP850 GPIO hardware\n");
+                gpio_bank_count = 7;
+                gpio_bank = gpio_bank_850;
+        }
+#endif
 
 #ifdef CONFIG_ARCH_OMAP24XX
         if (cpu_is_omap242x()) {
@@ -1420,7 +1515,7 @@ static int __init _omap_gpio_init(void)
                         __raw_writew(0xffff, bank->base + OMAP1610_GPIO_IRQSTATUS1);
                         __raw_writew(0x0014, bank->base + OMAP1610_GPIO_SYSCONFIG);
                 }
-                if (cpu_is_omap730() && bank->method == METHOD_GPIO_730) {
+                if (cpu_is_omap7xx() && bank->method == METHOD_GPIO_730) {
                         __raw_writel(0xffffffff, bank->base + OMAP730_GPIO_INT_MASK);
                         __raw_writel(0x00000000, bank->base + OMAP730_GPIO_INT_STATUS);
 
@@ -1743,6 +1838,9 @@ static int gpio_is_input(struct gpio_bank *bank, int mask)
         case METHOD_GPIO_730:
                 reg += OMAP730_GPIO_DIR_CONTROL;
                 break;
+        case METHOD_GPIO_850:
+                reg += OMAP850_GPIO_DIR_CONTROL;
+                break;
         case METHOD_GPIO_24XX:
                 reg += OMAP24XX_GPIO_OE;
                 break;
@@ -1762,7 +1860,8 @@ static int dbg_gpio_show(struct seq_file *s, void *unused)
 
                 if (bank_is_mpuio(bank))
                         gpio = OMAP_MPUIO(0);
-                else if (cpu_class_is_omap2() || cpu_is_omap730())
+                else if (cpu_class_is_omap2() || cpu_is_omap730() ||
+                                cpu_is_omap850())
                         bankwidth = 32;
 
                 for (j = 0; j < bankwidth; j++, gpio++, mask <<= 1) {