1 files changed, 33 insertions, 3 deletions

diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index bb8d7b771817..0e8fd135a57d 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -13,19 +13,42 @@
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
+#include <linux/gpio.h>
 #include <linux/amba/bus.h>
 #include <linux/amba/pl022.h>
 #include <linux/spi/spi.h>
+#include <linux/mfd/ab8500.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
+#include <plat/pincfg.h>
 #include <plat/i2c.h>
 
 #include <mach/hardware.h>
 #include <mach/setup.h>
 #include <mach/devices.h>
 
+#include "pins-db8500.h"
+
+static pin_cfg_t mop500_pins[] = {
+        /* SSP0 */
+        GPIO143_SSP0_CLK,
+        GPIO144_SSP0_FRM,
+        GPIO145_SSP0_RXD,
+        GPIO146_SSP0_TXD,
+
+        /* I2C */
+        GPIO147_I2C0_SCL,
+        GPIO148_I2C0_SDA,
+        GPIO16_I2C1_SCL,
+        GPIO17_I2C1_SDA,
+        GPIO10_I2C2_SDA,
+        GPIO11_I2C2_SCL,
+        GPIO229_I2C3_SDA,
+        GPIO230_I2C3_SCL,
+};
+
 static void ab4500_spi_cs_control(u32 command)
 {
         /* set the FRM signal, which is CS  - TODO */
@@ -48,15 +71,20 @@ struct pl022_config_chip ab4500_chip_info = {
         .cs_control = ab4500_spi_cs_control,
 };
 
+static struct ab8500_platform_data ab8500_platdata = {
+        .irq_base       = MOP500_AB8500_IRQ_BASE,
+};
+
 static struct spi_board_info u8500_spi_devices[] = {
         {
                 .modalias = "ab8500",
                 .controller_data = &ab4500_chip_info,
+                .platform_data = &ab8500_platdata,
                 .max_speed_hz = 12000000,
                 .bus_num = 0,
                 .chip_select = 0,
                 .mode = SPI_MODE_0,
-                .irq = IRQ_AB4500,
+                .irq = IRQ_DB8500_AB8500,
         },
 };
 
@@ -118,6 +146,10 @@ static void __init u8500_init_machine(void)
 {
         int i;
 
+        u8500_init_devices();
+
+        nmk_config_pins(mop500_pins, ARRAY_SIZE(mop500_pins));
+
         u8500_i2c0_device.dev.platform_data = &u8500_i2c0_data;
         ux500_i2c1_device.dev.platform_data = &u8500_i2c1_data;
         ux500_i2c2_device.dev.platform_data = &u8500_i2c2_data;
@@ -133,8 +165,6 @@ static void __init u8500_init_machine(void)
 
         spi_register_board_info(u8500_spi_devices,
                         ARRAY_SIZE(u8500_spi_devices));
-
-        u8500_init_devices();
 }
 
 MACHINE_START(U8500, "ST-Ericsson MOP500 platform")