2 files changed, 44 insertions, 38 deletions

diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c
index b4c6926a700c..a7b3f36e2262 100644
--- a/arch/arm/mach-u300/core.c
+++ b/arch/arm/mach-u300/core.c
@@ -26,7 +26,8 @@
 #include <linux/mtd/nand.h>
 #include <linux/mtd/fsmc.h>
 #include <linux/pinctrl/machine.h>
-#include <linux/pinctrl/pinmux.h>
+#include <linux/pinctrl/consumer.h>
+#include <linux/pinctrl/pinconf-generic.h>
 #include <linux/dma-mapping.h>
 
 #include <asm/types.h>
@@ -1477,7 +1478,7 @@ static struct coh901318_platform coh901318_platform = {
         .max_channels = U300_DMA_CHANNELS,
 };
 
-static struct resource pinmux_resources[] = {
+static struct resource pinctrl_resources[] = {
         {
                 .start = U300_SYSCON_BASE,
                 .end   = U300_SYSCON_BASE + SZ_4K - 1,
@@ -1506,6 +1507,13 @@ static struct platform_device i2c1_device = {
         .resource = i2c1_resources,
 };
 
+static struct platform_device pinctrl_device = {
+        .name = "pinctrl-u300",
+        .id = -1,
+        .num_resources = ARRAY_SIZE(pinctrl_resources),
+        .resource = pinctrl_resources,
+};
+
 /*
  * The different variants have a few different versions of the
  * GPIO block, with different number of ports.
@@ -1525,6 +1533,7 @@ static struct u300_gpio_platform u300_gpio_plat = {
 #endif
         .gpio_base = 0,
         .gpio_irq_base = IRQ_U300_GPIO_BASE,
+        .pinctrl_device = &pinctrl_device,
 };
 
 static struct platform_device gpio_device = {
@@ -1597,71 +1606,67 @@ static struct platform_device dma_device = {
         },
 };
 
-static struct platform_device pinmux_device = {
-        .name = "pinmux-u300",
-        .id = -1,
-        .num_resources = ARRAY_SIZE(pinmux_resources),
-        .resource = pinmux_resources,
+static unsigned long pin_pullup_conf[] = {
+        PIN_CONF_PACKED(PIN_CONFIG_BIAS_PULL_UP, 1),
 };
 
-/* Pinmux settings */
-static struct pinmux_map __initdata u300_pinmux_map[] = {
+static unsigned long pin_highz_conf[] = {
+        PIN_CONF_PACKED(PIN_CONFIG_BIAS_HIGH_IMPEDANCE, 0),
+};
+
+/* Pin control settings */
+static struct pinctrl_map __initdata u300_pinmux_map[] = {
         /* anonymous maps for chip power and EMIFs */
-        PINMUX_MAP_SYS_HOG("POWER", "pinmux-u300", "power"),
-        PINMUX_MAP_SYS_HOG("EMIF0", "pinmux-u300", "emif0"),
-        PINMUX_MAP_SYS_HOG("EMIF1", "pinmux-u300", "emif1"),
+        PIN_MAP_MUX_GROUP_HOG_DEFAULT("pinctrl-u300", NULL, "power"),
+        PIN_MAP_MUX_GROUP_HOG_DEFAULT("pinctrl-u300", NULL, "emif0"),
+        PIN_MAP_MUX_GROUP_HOG_DEFAULT("pinctrl-u300", NULL, "emif1"),
         /* per-device maps for MMC/SD, SPI and UART */
-        PINMUX_MAP("MMCSD", "pinmux-u300", "mmc0", "mmci"),
-        PINMUX_MAP("SPI", "pinmux-u300", "spi0", "pl022"),
-        PINMUX_MAP("UART0", "pinmux-u300", "uart0", "uart0"),
+        PIN_MAP_MUX_GROUP_DEFAULT("mmci",  "pinctrl-u300", NULL, "mmc0"),
+        PIN_MAP_MUX_GROUP_DEFAULT("pl022", "pinctrl-u300", NULL, "spi0"),
+        PIN_MAP_MUX_GROUP_DEFAULT("uart0", "pinctrl-u300", NULL, "uart0"),
+        /* This pin is used for clock return rather than GPIO */
+        PIN_MAP_CONFIGS_PIN_DEFAULT("mmci", "pinctrl-u300", "PIO APP GPIO 11",
+                                    pin_pullup_conf),
+        /* This pin is used for card detect */
+        PIN_MAP_CONFIGS_PIN_DEFAULT("mmci", "pinctrl-u300", "PIO MS INS",
+                                    pin_highz_conf),
 };
 
 struct u300_mux_hog {
-        const char *name;
         struct device *dev;
-        struct pinmux *pmx;
+        struct pinctrl *p;
 };
 
 static struct u300_mux_hog u300_mux_hogs[] = {
         {
-                .name = "uart0",
                 .dev = &uart0_device.dev,
         },
         {
-                .name = "spi0",
                 .dev = &pl022_device.dev,
         },
         {
-                .name = "mmc0",
                 .dev = &mmcsd_device.dev,
         },
 };
 
-static int __init u300_pinmux_fetch(void)
+static int __init u300_pinctrl_fetch(void)
 {
         int i;
 
         for (i = 0; i < ARRAY_SIZE(u300_mux_hogs); i++) {
-                struct pinmux *pmx;
-                int ret;
+                struct pinctrl *p;
 
-                pmx = pinmux_get(u300_mux_hogs[i].dev, NULL);
-                if (IS_ERR(pmx)) {
-                        pr_err("u300: could not get pinmux hog %s\n",
-                               u300_mux_hogs[i].name);
-                        continue;
-                }
-                ret = pinmux_enable(pmx);
-                if (ret) {
-                        pr_err("u300: could enable pinmux hog %s\n",
-                               u300_mux_hogs[i].name);
+                p = pinctrl_get_select_default(u300_mux_hogs[i].dev);
+                if (IS_ERR(p)) {
+                        pr_err("u300: could not get pinmux hog for dev %s\n",
+                               dev_name(u300_mux_hogs[i].dev));
                         continue;
                 }
-                u300_mux_hogs[i].pmx = pmx;
+                u300_mux_hogs[i].p = p;
         }
         return 0;
 }
-subsys_initcall(u300_pinmux_fetch);
+subsys_initcall(u300_pinctrl_fetch);
 
 /*
  * Notice that AMBA devices are initialized before platform devices.
@@ -1676,7 +1681,6 @@ static struct platform_device *platform_devs[] __initdata = {
         &gpio_device,
         &nand_device,
         &wdog_device,
-        &pinmux_device,
 };
 
 /*
@@ -1861,8 +1865,8 @@ void __init u300_init_devices(void)
         u300_assign_physmem();
 
         /* Initialize pinmuxing */
-        pinmux_register_mappings(u300_pinmux_map,
-                                 ARRAY_SIZE(u300_pinmux_map));
+        pinctrl_register_mappings(u300_pinmux_map,
+                                  ARRAY_SIZE(u300_pinmux_map));
 
         /* Register subdevices on the I2C buses */
         u300_i2c_register_board_devices();
diff --git a/arch/arm/mach-u300/include/mach/gpio-u300.h b/arch/arm/mach-u300/include/mach/gpio-u300.h
index bf4c7935aecd..e81400c1753a 100644
--- a/arch/arm/mach-u300/include/mach/gpio-u300.h
+++ b/arch/arm/mach-u300/include/mach/gpio-u300.h
@@ -24,12 +24,14 @@ enum u300_gpio_variant {
  * @ports: number of GPIO block ports
  * @gpio_base: first GPIO number for this block (use a free range)
  * @gpio_irq_base: first GPIO IRQ number for this block (use a free range)
+ * @pinctrl_device: pin control device to spawn as child
  */
 struct u300_gpio_platform {
         enum u300_gpio_variant variant;
         u8 ports;
         int gpio_base;
         int gpio_irq_base;
+        struct platform_device *pinctrl_device;
 };
 
 #endif /* __MACH_U300_GPIO_U300_H */