9 files changed, 83 insertions, 9 deletions

diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
index b34287ab5afd..e24961109b70 100644
--- a/arch/arm/mach-s3c24xx/Kconfig
+++ b/arch/arm/mach-s3c24xx/Kconfig
@@ -518,6 +518,11 @@ config S3C2443_DMA
         help
           Internal config node for S3C2443 DMA support
 
+config S3C2443_SETUP_SPI
+        bool
+        help
+          Common setup code for SPI GPIO configurations
+
 endif   # CPU_S3C2443 || CPU_S3C2416
 
 if CPU_S3C2443
diff --git a/arch/arm/mach-s3c24xx/Makefile b/arch/arm/mach-s3c24xx/Makefile
index 270a0b6f4f22..0ab6ab15da4c 100644
--- a/arch/arm/mach-s3c24xx/Makefile
+++ b/arch/arm/mach-s3c24xx/Makefile
@@ -97,5 +97,6 @@ obj-$(CONFIG_MACH_OSIRIS_DVS)		+= mach-osiris-dvs.o
 # device setup
 
 obj-$(CONFIG_S3C2416_SETUP_SDHCI_GPIO)  += setup-sdhci-gpio.o
+obj-$(CONFIG_S3C2443_SETUP_SPI)         += setup-spi.o
 obj-$(CONFIG_ARCH_S3C24XX)              += setup-i2c.o
 obj-$(CONFIG_S3C24XX_SETUP_TS)          += setup-ts.o
diff --git a/arch/arm/mach-s3c24xx/clock-s3c2416.c b/arch/arm/mach-s3c24xx/clock-s3c2416.c
index dbc9ab4aaca2..8702ecfaab30 100644
--- a/arch/arm/mach-s3c24xx/clock-s3c2416.c
+++ b/arch/arm/mach-s3c24xx/clock-s3c2416.c
@@ -144,6 +144,7 @@ static struct clk_lookup s3c2416_clk_lookup[] = {
         CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.0", &hsmmc0_clk),
         CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &hsmmc_mux0.clk),
         CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &hsmmc_mux1.clk),
+        CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk2", &hsspi_mux.clk),
 };
 
 void __init s3c2416_init_clocks(int xtal)
diff --git a/arch/arm/mach-s3c24xx/clock-s3c2443.c b/arch/arm/mach-s3c24xx/clock-s3c2443.c
index efb3ac359566..a4c5a520d994 100644
--- a/arch/arm/mach-s3c24xx/clock-s3c2443.c
+++ b/arch/arm/mach-s3c24xx/clock-s3c2443.c
@@ -179,6 +179,11 @@ static struct clk *clks[] __initdata = {
         &clk_hsmmc,
 };
 
+static struct clk_lookup s3c2443_clk_lookup[] = {
+        CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &clk_hsmmc),
+        CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk2", &clk_hsspi.clk),
+};
+
 void __init s3c2443_init_clocks(int xtal)
 {
         unsigned long epllcon = __raw_readl(S3C2443_EPLLCON);
@@ -210,6 +215,7 @@ void __init s3c2443_init_clocks(int xtal)
 
         s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
         s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
+        clkdev_add_table(s3c2443_clk_lookup, ARRAY_SIZE(s3c2443_clk_lookup));
 
         s3c_pwmclk_init();
 }
diff --git a/arch/arm/mach-s3c24xx/common-s3c2443.c b/arch/arm/mach-s3c24xx/common-s3c2443.c
index 460431589f39..aeeb2be283fa 100644
--- a/arch/arm/mach-s3c24xx/common-s3c2443.c
+++ b/arch/arm/mach-s3c24xx/common-s3c2443.c
@@ -424,11 +424,6 @@ static struct clk init_clocks_off[] = {
                 .enable         = s3c2443_clkcon_enable_p,
                 .ctrlbit        = S3C2443_PCLKCON_IIS,
         }, {
-                .name           = "hsspi",
-                .parent         = &clk_p,
-                .enable         = s3c2443_clkcon_enable_p,
-                .ctrlbit        = S3C2443_PCLKCON_HSSPI,
-        }, {
                 .name           = "adc",
                 .parent         = &clk_p,
                 .enable         = s3c2443_clkcon_enable_p,
@@ -562,6 +557,14 @@ static struct clk hsmmc1_clk = {
         .ctrlbit        = S3C2443_HCLKCON_HSMMC,
 };
 
+static struct clk hsspi_clk = {
+        .name           = "spi",
+        .devname        = "s3c64xx-spi.0",
+        .parent         = &clk_p,
+        .enable         = s3c2443_clkcon_enable_p,
+        .ctrlbit        = S3C2443_PCLKCON_HSSPI,
+};
+
 /* EPLLCON compatible enough to get on/off information */
 
 void __init_or_cpufreq s3c2443_common_setup_clocks(pll_fn get_mpll)
@@ -612,6 +615,7 @@ static struct clk *clks[] __initdata = {
         &clk_usb_bus,
         &clk_armdiv,
         &hsmmc1_clk,
+        &hsspi_clk,
 };
 
 static struct clksrc_clk *clksrcs[] __initdata = {
@@ -629,6 +633,7 @@ static struct clk_lookup s3c2443_clk_lookup[] = {
         CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_p),
         CLKDEV_INIT(NULL, "clk_uart_baud3", &clk_esys_uart.clk),
         CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.0", &hsmmc1_clk),
+        CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk0", &hsspi_clk),
 };
 
 void __init s3c2443_common_init_clocks(int xtal, pll_fn get_mpll,
diff --git a/arch/arm/mach-s3c24xx/dma-s3c2443.c b/arch/arm/mach-s3c24xx/dma-s3c2443.c
index e227c472a40a..2d94228d2866 100644
--- a/arch/arm/mach-s3c24xx/dma-s3c2443.c
+++ b/arch/arm/mach-s3c24xx/dma-s3c2443.c
@@ -55,12 +55,20 @@ static struct s3c24xx_dma_map __initdata s3c2443_dma_mappings[] = {
                 .name           = "sdi",
                 .channels       = MAP(S3C2443_DMAREQSEL_SDI),
         },
-        [DMACH_SPI0] = {
-                .name           = "spi0",
+        [DMACH_SPI0_RX] = {
+                .name           = "spi0-rx",
+                .channels       = MAP(S3C2443_DMAREQSEL_SPI0RX),
+        },
+        [DMACH_SPI0_TX] = {
+                .name           = "spi0-tx",
                 .channels       = MAP(S3C2443_DMAREQSEL_SPI0TX),
         },
-        [DMACH_SPI1] = { /* only on S3C2443/S3C2450 */
-                .name           = "spi1",
+        [DMACH_SPI1_RX] = { /* only on S3C2443/S3C2450 */
+                .name           = "spi1-rx",
+                .channels       = MAP(S3C2443_DMAREQSEL_SPI1RX),
+        },
+        [DMACH_SPI1_TX] = { /* only on S3C2443/S3C2450 */
+                .name           = "spi1-tx",
                 .channels       = MAP(S3C2443_DMAREQSEL_SPI1TX),
         },
         [DMACH_UART0] = {
diff --git a/arch/arm/mach-s3c24xx/include/mach/dma.h b/arch/arm/mach-s3c24xx/include/mach/dma.h
index acbdfecd4186..454831b66037 100644
--- a/arch/arm/mach-s3c24xx/include/mach/dma.h
+++ b/arch/arm/mach-s3c24xx/include/mach/dma.h
@@ -47,6 +47,10 @@ enum dma_ch {
         DMACH_UART2_SRC2,
         DMACH_UART3,            /* s3c2443 has extra uart */
         DMACH_UART3_SRC2,
+        DMACH_SPI0_TX,          /* s3c2443/2416/2450 hsspi0 */
+        DMACH_SPI0_RX,          /* s3c2443/2416/2450 hsspi0 */
+        DMACH_SPI1_TX,          /* s3c2443/2450 hsspi1 */
+        DMACH_SPI1_RX,          /* s3c2443/2450 hsspi1 */
         DMACH_MAX,              /* the end entry */
 };
 
diff --git a/arch/arm/mach-s3c24xx/include/mach/map.h b/arch/arm/mach-s3c24xx/include/mach/map.h
index 78ae807f1281..8ba381f2dbe1 100644
--- a/arch/arm/mach-s3c24xx/include/mach/map.h
+++ b/arch/arm/mach-s3c24xx/include/mach/map.h
@@ -98,6 +98,8 @@
 
 /* SPI */
 #define S3C2410_PA_SPI     (0x59000000)
+#define S3C2443_PA_SPI0         (0x52000000)
+#define S3C2443_PA_SPI1         S3C2410_PA_SPI
 
 /* SDI */
 #define S3C2410_PA_SDI     (0x5A000000)
@@ -162,4 +164,7 @@
 #define S3C_PA_WDT          S3C2410_PA_WATCHDOG
 #define S3C_PA_NAND         S3C24XX_PA_NAND
 
+#define S3C_PA_SPI0             S3C2443_PA_SPI0
+#define S3C_PA_SPI1             S3C2443_PA_SPI1
+
 #endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-s3c24xx/setup-spi.c b/arch/arm/mach-s3c24xx/setup-spi.c
new file mode 100644
index 000000000000..5712c85f39b1
--- /dev/null
+++ b/arch/arm/mach-s3c24xx/setup-spi.c
@@ -0,0 +1,39 @@
+/*
+ * HS-SPI device setup for S3C2443/S3C2416
+ *
+ * Copyright (C) 2011 Samsung Electronics Ltd.
+ *              http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+
+#include <plat/gpio-cfg.h>
+#include <plat/s3c64xx-spi.h>
+
+#include <mach/hardware.h>
+#include <mach/regs-gpio.h>
+
+#ifdef CONFIG_S3C64XX_DEV_SPI0
+struct s3c64xx_spi_info s3c64xx_spi0_pdata __initdata = {
+        .fifo_lvl_mask  = 0x7f,
+        .rx_lvl_offset  = 13,
+        .tx_st_done     = 21,
+        .high_speed     = 1,
+};
+
+int s3c64xx_spi0_cfg_gpio(struct platform_device *pdev)
+{
+        /* enable hsspi bit in misccr */
+        s3c2410_modify_misccr(S3C2416_MISCCR_HSSPI_EN2, 1);
+
+        s3c_gpio_cfgall_range(S3C2410_GPE(11), 3,
+                              S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
+
+        return 0;
+}
+#endif