1 files changed, 1 insertions, 23 deletions

diff --git a/arch/arm/mach-s3c2440/mach-mini2440.c b/arch/arm/mach-s3c2440/mach-mini2440.c
index f62bb4c793bd..d80f129bca94 100644
--- a/arch/arm/mach-s3c2440/mach-mini2440.c
+++ b/arch/arm/mach-s3c2440/mach-mini2440.c
@@ -97,26 +97,8 @@ static struct s3c2410_uartcfg mini2440_uartcfgs[] __initdata = {
 
 /* USB device UDC support */
 
-static void mini2440_udc_pullup(enum s3c2410_udc_cmd_e cmd)
-{
-        pr_debug("udc: pullup(%d)\n", cmd);
-
-        switch (cmd) {
-                case S3C2410_UDC_P_ENABLE :
-                        gpio_set_value(S3C2410_GPC(5), 1);
-                        break;
-                case S3C2410_UDC_P_DISABLE :
-                        gpio_set_value(S3C2410_GPC(5), 0);
-                        break;
-                case S3C2410_UDC_P_RESET :
-                        break;
-                default:
-                        break;
-        }
-}
-
 static struct s3c2410_udc_mach_info mini2440_udc_cfg __initdata = {
-        .udc_command            = mini2440_udc_pullup,
+        .pullup_pin = S3C2410_GPC(5),
 };
 
 
@@ -644,10 +626,6 @@ static void __init mini2440_init(void)
         s3c2410_gpio_setpin(S3C2410_GPB(1), 0);
         s3c_gpio_cfgpin(S3C2410_GPB(1), S3C2410_GPIO_INPUT);
 
-        /* Make sure the D+ pullup pin is output */
-        WARN_ON(gpio_request(S3C2410_GPC(5), "udc pup"));
-        gpio_direction_output(S3C2410_GPC(5), 0);
-
         /* mark the key as input, without pullups (there is one on the board) */
         for (i = 0; i < ARRAY_SIZE(mini2440_buttons); i++) {
                 s3c_gpio_setpull(mini2440_buttons[i].gpio, S3C_GPIO_PULL_UP);