1 files changed, 7 insertions, 7 deletions

diff --git a/arch/arm/mach-s3c2412/mach-smdk2413.c b/arch/arm/mach-s3c2412/mach-smdk2413.c
index 0392065af1af..ba93a356a839 100644
--- a/arch/arm/mach-s3c2412/mach-smdk2413.c
+++ b/arch/arm/mach-s3c2412/mach-smdk2413.c
@@ -85,10 +85,10 @@ static void smdk2413_udc_pullup(enum s3c2410_udc_cmd_e cmd)
         switch (cmd)
         {
                 case S3C2410_UDC_P_ENABLE :
-                        s3c2410_gpio_setpin(S3C2410_GPF(2), 1);
+                        gpio_set_value(S3C2410_GPF(2), 1);
                         break;
                 case S3C2410_UDC_P_DISABLE :
-                        s3c2410_gpio_setpin(S3C2410_GPF(2), 0);
+                        gpio_set_value(S3C2410_GPF(2), 0);
                         break;
                 case S3C2410_UDC_P_RESET :
                         break;
@@ -134,8 +134,8 @@ static void __init smdk2413_machine_init(void)
 {       /* Turn off suspend on both USB ports, and switch the
          * selectable USB port to USB device mode. */
 
-        s3c2410_gpio_setpin(S3C2410_GPF(2), 0);
-        s3c2410_gpio_cfgpin(S3C2410_GPF(2), S3C2410_GPIO_OUTPUT);
+        WARN_ON(gpio_request(S3C2410_GPF(2), "udc pull"));
+        gpio_direction_output(S3C2410_GPF(2), 0);
 
         s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST |
                               S3C2410_MISCCR_USBSUSPND0 |
@@ -150,7 +150,7 @@ static void __init smdk2413_machine_init(void)
 }
 
 MACHINE_START(S3C2413, "S3C2413")
-        /* Maintainer: Ben Dooks <ben@fluff.org> */
+        /* Maintainer: Ben Dooks <ben-linux@fluff.org> */
         .phys_io        = S3C2410_PA_UART,
         .io_pg_offst    = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
         .boot_params    = S3C2410_SDRAM_PA + 0x100,
@@ -163,7 +163,7 @@ MACHINE_START(S3C2413, "S3C2413")
 MACHINE_END
 
 MACHINE_START(SMDK2412, "SMDK2412")
-        /* Maintainer: Ben Dooks <ben@fluff.org> */
+        /* Maintainer: Ben Dooks <ben-linux@fluff.org> */
         .phys_io        = S3C2410_PA_UART,
         .io_pg_offst    = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
         .boot_params    = S3C2410_SDRAM_PA + 0x100,
@@ -176,7 +176,7 @@ MACHINE_START(SMDK2412, "SMDK2412")
 MACHINE_END
 
 MACHINE_START(SMDK2413, "SMDK2413")
-        /* Maintainer: Ben Dooks <ben@fluff.org> */
+        /* Maintainer: Ben Dooks <ben-linux@fluff.org> */
         .phys_io        = S3C2410_PA_UART,
         .io_pg_offst    = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
         .boot_params    = S3C2410_SDRAM_PA + 0x100,