24 files changed, 195 insertions, 87 deletions

diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig
index 7fcbdb923d79..554731868b07 100644
--- a/arch/arm/mach-s3c2410/Kconfig
+++ b/arch/arm/mach-s3c2410/Kconfig
@@ -79,6 +79,14 @@ config ARCH_H1940
         help
           Say Y here if you are using the HP IPAQ H1940
 
+config H1940BT
+        tristate "Control the state of H1940 bluetooth chip"
+        depends on ARCH_H1940
+        select RFKILL
+        help
+          This is a simple driver that is able to control
+          the state of built in bluetooth chip on h1940.
+
 config PM_H1940
         bool
         help
diff --git a/arch/arm/mach-s3c2410/Makefile b/arch/arm/mach-s3c2410/Makefile
index 2ab5ba4b266f..0d468e96e83e 100644
--- a/arch/arm/mach-s3c2410/Makefile
+++ b/arch/arm/mach-s3c2410/Makefile
@@ -21,7 +21,8 @@ obj-$(CONFIG_S3C2410_PLLTABLE)	+= pll.o
 # Machine support
 
 obj-$(CONFIG_ARCH_SMDK2410)     += mach-smdk2410.o
-obj-$(CONFIG_ARCH_H1940)        += mach-h1940.o h1940-bluetooth.o
+obj-$(CONFIG_ARCH_H1940)        += mach-h1940.o
+obj-$(CONFIG_H1940BT)           += h1940-bluetooth.o
 obj-$(CONFIG_PM_H1940)          += pm-h1940.o
 obj-$(CONFIG_MACH_N30)          += mach-n30.o
 obj-$(CONFIG_ARCH_BAST)         += mach-bast.o usb-simtec.o
diff --git a/arch/arm/mach-s3c2410/bast-irq.c b/arch/arm/mach-s3c2410/bast-irq.c
index 9a37c87152b0..217b102866d0 100644
--- a/arch/arm/mach-s3c2410/bast-irq.c
+++ b/arch/arm/mach-s3c2410/bast-irq.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/mach-s3c2410/bast-irq.c
  *
- * Copyright (c) 2003,2005 Simtec Electronics
+ * Copyright 2003-2005 Simtec Electronics
  *   Ben Dooks <ben@simtec.co.uk>
  *
  * http://www.simtec.co.uk/products/EB2410ITX/
@@ -141,7 +141,7 @@ static __init int bast_irq_init(void)
         unsigned int i;
 
         if (machine_is_bast()) {
-                printk(KERN_INFO "BAST PC104 IRQ routing, (c) 2005 Simtec Electronics\n");
+                printk(KERN_INFO "BAST PC104 IRQ routing, Copyright 2005 Simtec Electronics\n");
 
                 /* zap all the IRQs */
 
diff --git a/arch/arm/mach-s3c2410/cpu-freq.c b/arch/arm/mach-s3c2410/cpu-freq.c
index 9d1186877d08..75189df995ae 100644
--- a/arch/arm/mach-s3c2410/cpu-freq.c
+++ b/arch/arm/mach-s3c2410/cpu-freq.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/mach-s3c2410/cpu-freq.c
  *
- * Copyright (c) 2006,2008 Simtec Electronics
+ * Copyright (c) 2006-2008 Simtec Electronics
  *      http://armlinux.simtec.co.uk/
  *      Ben Dooks <ben@simtec.co.uk>
  *
diff --git a/arch/arm/mach-s3c2410/h1940-bluetooth.c b/arch/arm/mach-s3c2410/h1940-bluetooth.c
index 5aabf117cbb0..b7d1f8d27bc2 100644
--- a/arch/arm/mach-s3c2410/h1940-bluetooth.c
+++ b/arch/arm/mach-s3c2410/h1940-bluetooth.c
@@ -17,6 +17,7 @@
 #include <linux/ctype.h>
 #include <linux/leds.h>
 #include <linux/gpio.h>
+#include <linux/rfkill.h>
 
 #include <mach/regs-gpio.h>
 #include <mach/hardware.h>
@@ -24,21 +25,10 @@
 
 #define DRV_NAME              "h1940-bt"
 
-#ifdef CONFIG_LEDS_H1940
-DEFINE_LED_TRIGGER(bt_led_trigger);
-#endif
-
-static int state;
-
 /* Bluetooth control */
 static void h1940bt_enable(int on)
 {
         if (on) {
-#ifdef CONFIG_LEDS_H1940
-                /* flashing Blue */
-                led_trigger_event(bt_led_trigger, LED_HALF);
-#endif
-
                 /* Power on the chip */
                 h1940_latch_control(0, H1940_LATCH_BLUETOOTH_POWER);
                 /* Reset the chip */
@@ -46,48 +36,31 @@ static void h1940bt_enable(int on)
                 s3c2410_gpio_setpin(S3C2410_GPH(1), 1);
                 mdelay(10);
                 s3c2410_gpio_setpin(S3C2410_GPH(1), 0);
-
-                state = 1;
         }
         else {
-#ifdef CONFIG_LEDS_H1940
-                led_trigger_event(bt_led_trigger, 0);
-#endif
-
                 s3c2410_gpio_setpin(S3C2410_GPH(1), 1);
                 mdelay(10);
                 s3c2410_gpio_setpin(S3C2410_GPH(1), 0);
                 mdelay(10);
                 h1940_latch_control(H1940_LATCH_BLUETOOTH_POWER, 0);
-
-                state = 0;
         }
 }
 
-static ssize_t h1940bt_show(struct device *dev, struct device_attribute *attr, char *buf)
+static int h1940bt_set_block(void *data, bool blocked)
 {
-        return snprintf(buf, PAGE_SIZE, "%d\n", state);
+        h1940bt_enable(!blocked);
+        return 0;
 }
 
-static ssize_t h1940bt_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
-{
-        int new_state;
-        char *endp;
-
-        new_state = simple_strtoul(buf, &endp, 0);
-        if (*endp && !isspace(*endp))
-                return -EINVAL;
-
-        h1940bt_enable(new_state);
-
-        return count;
-}
-static DEVICE_ATTR(enable, 0644,
-                h1940bt_show,
-                h1940bt_store);
+static const struct rfkill_ops h1940bt_rfkill_ops = {
+        .set_block = h1940bt_set_block,
+};
 
 static int __init h1940bt_probe(struct platform_device *pdev)
 {
+        struct rfkill *rfk;
+        int ret = 0;
+
         /* Configures BT serial port GPIOs */
         s3c2410_gpio_cfgpin(S3C2410_GPH(0), S3C2410_GPH0_nCTS0);
         s3c2410_gpio_pullup(S3C2410_GPH(0), 1);
@@ -98,21 +71,44 @@ static int __init h1940bt_probe(struct platform_device *pdev)
         s3c2410_gpio_cfgpin(S3C2410_GPH(3), S3C2410_GPH3_RXD0);
         s3c2410_gpio_pullup(S3C2410_GPH(3), 1);
 
-#ifdef CONFIG_LEDS_H1940
-        led_trigger_register_simple("h1940-bluetooth", &bt_led_trigger);
-#endif
 
-        /* disable BT by default */
-        h1940bt_enable(0);
+        rfk = rfkill_alloc(DRV_NAME, &pdev->dev, RFKILL_TYPE_BLUETOOTH,
+                        &h1940bt_rfkill_ops, NULL);
+        if (!rfk) {
+                ret = -ENOMEM;
+                goto err_rfk_alloc;
+        }
+
+        rfkill_set_led_trigger_name(rfk, "h1940-bluetooth");
+
+        ret = rfkill_register(rfk);
+        if (ret)
+                goto err_rfkill;
+
+        platform_set_drvdata(pdev, rfk);
+
+        return 0;
 
-        return device_create_file(&pdev->dev, &dev_attr_enable);
+err_rfkill:
+        rfkill_destroy(rfk);
+err_rfk_alloc:
+        return ret;
 }
 
 static int h1940bt_remove(struct platform_device *pdev)
 {
-#ifdef CONFIG_LEDS_H1940
-        led_trigger_unregister_simple(bt_led_trigger);
-#endif
+        struct rfkill *rfk = platform_get_drvdata(pdev);
+
+        platform_set_drvdata(pdev, NULL);
+
+        if (rfk) {
+                rfkill_unregister(rfk);
+                rfkill_destroy(rfk);
+        }
+        rfk = NULL;
+
+        h1940bt_enable(0);
+
         return 0;
 }
 
diff --git a/arch/arm/mach-s3c2410/include/mach/bast-cpld.h b/arch/arm/mach-s3c2410/include/mach/bast-cpld.h
index 20493b048360..bee2a7a932a0 100644
--- a/arch/arm/mach-s3c2410/include/mach/bast-cpld.h
+++ b/arch/arm/mach-s3c2410/include/mach/bast-cpld.h
@@ -1,6 +1,6 @@
 /* arch/arm/mach-s3c2410/include/mach/bast-cpld.h
  *
- * Copyright (c) 2003,2004 Simtec Electronics
+ * Copyright (c) 2003-2004 Simtec Electronics
  *      Ben Dooks <ben@simtec.co.uk>
  *
  * BAST - CPLD control constants
diff --git a/arch/arm/mach-s3c2410/include/mach/bast-irq.h b/arch/arm/mach-s3c2410/include/mach/bast-irq.h
index 501c202b53cf..cac428c42e7f 100644
--- a/arch/arm/mach-s3c2410/include/mach/bast-irq.h
+++ b/arch/arm/mach-s3c2410/include/mach/bast-irq.h
@@ -1,6 +1,6 @@
 /* arch/arm/mach-s3c2410/include/mach/bast-irq.h
  *
- * Copyright (c) 2003,2004 Simtec Electronics
+ * Copyright (c) 2003-2004 Simtec Electronics
  *      Ben Dooks <ben@simtec.co.uk>
  *
  * Machine BAST - IRQ Number definitions
diff --git a/arch/arm/mach-s3c2410/include/mach/bast-map.h b/arch/arm/mach-s3c2410/include/mach/bast-map.h
index c2c5baf07345..6e7dc9d0cf0e 100644
--- a/arch/arm/mach-s3c2410/include/mach/bast-map.h
+++ b/arch/arm/mach-s3c2410/include/mach/bast-map.h
@@ -1,6 +1,6 @@
 /* arch/arm/mach-s3c2410/include/mach/bast-map.h
  *
- * Copyright (c) 2003,2004 Simtec Electronics
+ * Copyright (c) 2003-2004 Simtec Electronics
  *      Ben Dooks <ben@simtec.co.uk>
  *
  * Machine BAST - Memory map definitions
diff --git a/arch/arm/mach-s3c2410/include/mach/bast-pmu.h b/arch/arm/mach-s3c2410/include/mach/bast-pmu.h
index 61684cb8ce59..4c38b39b741d 100644
--- a/arch/arm/mach-s3c2410/include/mach/bast-pmu.h
+++ b/arch/arm/mach-s3c2410/include/mach/bast-pmu.h
@@ -1,6 +1,6 @@
 /* arch/arm/mach-s3c2410/include/mach/bast-pmu.h
  *
- * Copyright (c) 2003,2004 Simtec Electronics
+ * Copyright (c) 2003-2004 Simtec Electronics
  *      Ben Dooks <ben@simtec.co.uk>
  *      Vincent Sanders <vince@simtec.co.uk>
  *
diff --git a/arch/arm/mach-s3c2410/include/mach/dma.h b/arch/arm/mach-s3c2410/include/mach/dma.h
index 92e2687009ea..08ac5f96c012 100644
--- a/arch/arm/mach-s3c2410/include/mach/dma.h
+++ b/arch/arm/mach-s3c2410/include/mach/dma.h
@@ -1,6 +1,6 @@
 /* arch/arm/mach-s3c2410/include/mach/dma.h
  *
- * Copyright (C) 2003,2004,2006 Simtec Electronics
+ * Copyright (C) 2003-2006 Simtec Electronics
  *      Ben Dooks <ben@simtec.co.uk>
  *
  * Samsung S3C24XX DMA support
diff --git a/arch/arm/mach-s3c2410/include/mach/gpio-fns.h b/arch/arm/mach-s3c2410/include/mach/gpio-fns.h
index 801dff13858d..035a493952db 100644
--- a/arch/arm/mach-s3c2410/include/mach/gpio-fns.h
+++ b/arch/arm/mach-s3c2410/include/mach/gpio-fns.h
@@ -1,6 +1,6 @@
 /* arch/arm/mach-s3c2410/include/mach/gpio-fns.h
  *
- * Copyright (c) 2003,2009 Simtec Electronics
+ * Copyright (c) 2003-2009 Simtec Electronics
  *      Ben Dooks <ben@simtec.co.uk>
  *
  * S3C2410 - hardware
diff --git a/arch/arm/mach-s3c2410/include/mach/osiris-map.h b/arch/arm/mach-s3c2410/include/mach/osiris-map.h
index 639eff523d4e..17380f848428 100644
--- a/arch/arm/mach-s3c2410/include/mach/osiris-map.h
+++ b/arch/arm/mach-s3c2410/include/mach/osiris-map.h
@@ -1,6 +1,6 @@
 /* arch/arm/mach-s3c2410/include/mach/osiris-map.h
  *
- * (c) 2005 Simtec Electronics
+ * Copyright 2005 Simtec Electronics
  *      http://www.simtec.co.uk/products/
  *      Ben Dooks <ben@simtec.co.uk>
  *
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-clock.h b/arch/arm/mach-s3c2410/include/mach/regs-clock.h
index 2a5d90e957fb..9a0d169be137 100644
--- a/arch/arm/mach-s3c2410/include/mach/regs-clock.h
+++ b/arch/arm/mach-s3c2410/include/mach/regs-clock.h
@@ -1,7 +1,7 @@
 /* arch/arm/mach-s3c2410/include/mach/regs-clock.h
  *
- * Copyright (c) 2003,2004,2005,2006 Simtec Electronics <linux@simtec.co.uk>
- *                    http://armlinux.simtec.co.uk/
+ * Copyright (c) 2003-2006 Simtec Electronics <linux@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-gpio.h b/arch/arm/mach-s3c2410/include/mach/regs-gpio.h
index f6e8eec879c8..ebc85c6dadbf 100644
--- a/arch/arm/mach-s3c2410/include/mach/regs-gpio.h
+++ b/arch/arm/mach-s3c2410/include/mach/regs-gpio.h
@@ -1,7 +1,7 @@
 /* arch/arm/mach-s3c2410/include/mach/regs-gpio.h
  *
- * Copyright (c) 2003,2004 Simtec Electronics <linux@simtec.co.uk>
- *                         http://www.simtec.co.uk/products/SWLINUX/
+ * Copyright (c) 2003-2004 Simtec Electronics <linux@simtec.co.uk>
+ *      http://www.simtec.co.uk/products/SWLINUX/
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-power.h b/arch/arm/mach-s3c2410/include/mach/regs-power.h
index 2d36353f57d7..4932b87bdf3d 100644
--- a/arch/arm/mach-s3c2410/include/mach/regs-power.h
+++ b/arch/arm/mach-s3c2410/include/mach/regs-power.h
@@ -1,7 +1,7 @@
 /* arch/arm/mach-s3c2410/include/mach/regs-power.h
  *
- * Copyright (c) 2003,2004,2005,2006 Simtec Electronics <linux@simtec.co.uk>
- *                    http://armlinux.simtec.co.uk/
+ * Copyright (c) 2003-2006 Simtec Electronics <linux@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
diff --git a/arch/arm/mach-s3c2410/include/mach/uncompress.h b/arch/arm/mach-s3c2410/include/mach/uncompress.h
index c9432103750d..72f756c5e504 100644
--- a/arch/arm/mach-s3c2410/include/mach/uncompress.h
+++ b/arch/arm/mach-s3c2410/include/mach/uncompress.h
@@ -1,7 +1,6 @@
-
 /* arch/arm/mach-s3c2410/include/mach/uncompress.h
  *
- * Copyright (c) 2003, 2007 Simtec Electronics
+ * Copyright (c) 2003-2007 Simtec Electronics
  *      http://armlinux.simtec.co.uk/
  *      Ben Dooks <ben@simtec.co.uk>
  *
diff --git a/arch/arm/mach-s3c2410/include/mach/vr1000-irq.h b/arch/arm/mach-s3c2410/include/mach/vr1000-irq.h
index f53f85b4ad8b..47add133b8ee 100644
--- a/arch/arm/mach-s3c2410/include/mach/vr1000-irq.h
+++ b/arch/arm/mach-s3c2410/include/mach/vr1000-irq.h
@@ -1,6 +1,6 @@
 /* arch/arm/mach-s3c2410/include/mach/vr1000-irq.h
  *
- * Copyright (c) 2003,2004 Simtec Electronics
+ * Copyright (c) 2003-2004 Simtec Electronics
  *      Ben Dooks <ben@simtec.co.uk>
  *
  * Machine VR1000 - IRQ Number definitions
diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c
index 647c9adb018f..4c79ac8a6c33 100644
--- a/arch/arm/mach-s3c2410/mach-bast.c
+++ b/arch/arm/mach-s3c2410/mach-bast.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/mach-s3c2410/mach-bast.c
  *
- * Copyright (c) 2003-2005,2008 Simtec Electronics
+ * Copyright 2003-2008 Simtec Electronics
  *   Ben Dooks <ben@simtec.co.uk>
  *
  * http://www.simtec.co.uk/products/EB2410ITX/
@@ -61,11 +61,12 @@
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <plat/cpu-freq.h>
+#include <plat/audio-simtec.h>
 
 #include "usb-simtec.h"
 #include "nor-simtec.h"
 
-#define COPYRIGHT ", (c) 2004-2005 Simtec Electronics"
+#define COPYRIGHT ", Copyright 2004-2008 Simtec Electronics"
 
 /* macros for virtual address mods for the io space entries */
 #define VA_C5(item) ((unsigned long)(item) + BAST_VAM_CS5)
@@ -247,7 +248,7 @@ static int chip0_map[] = { 1 };
 static int chip1_map[] = { 2 };
 static int chip2_map[] = { 3 };
 
-static struct mtd_partition bast_default_nand_part[] = {
+static struct mtd_partition __initdata bast_default_nand_part[] = {
         [0] = {
                 .name   = "Boot Agent",
                 .size   = SZ_16K,
@@ -273,7 +274,7 @@ static struct mtd_partition bast_default_nand_part[] = {
  * socket.
 */
 
-static struct s3c2410_nand_set bast_nand_sets[] = {
+static struct s3c2410_nand_set __initdata bast_nand_sets[] = {
         [0] = {
                 .name           = "SmartMedia",
                 .nr_chips       = 1,
@@ -323,7 +324,7 @@ static void bast_nand_select(struct s3c2410_nand_set *set, int slot)
         __raw_writeb(tmp, BAST_VA_CTRL2);
 }
 
-static struct s3c2410_platform_nand bast_nand_info = {
+static struct s3c2410_platform_nand __initdata bast_nand_info = {
         .tacls          = 30,
         .twrph0         = 60,
         .twrph1         = 60,
@@ -608,6 +609,11 @@ static struct s3c_cpufreq_board __initdata bast_cpufreq = {
         .need_io        = 1,
 };
 
+static struct s3c24xx_audio_simtec_pdata __initdata bast_audio = {
+        .have_mic       = 1,
+        .have_lout      = 1,
+};
+
 static void __init bast_map_io(void)
 {
         /* initialise the clocks */
@@ -625,7 +631,6 @@ static void __init bast_map_io(void)
 
         s3c24xx_register_clocks(bast_clocks, ARRAY_SIZE(bast_clocks));
 
-        s3c_device_nand.dev.platform_data = &bast_nand_info;
         s3c_device_hwmon.dev.platform_data = &bast_hwmon_info;
 
         s3c24xx_init_io(bast_iodesc, ARRAY_SIZE(bast_iodesc));
@@ -639,6 +644,7 @@ static void __init bast_init(void)
         sysdev_register(&bast_pm_sysdev);
 
         s3c_i2c0_set_platdata(&bast_i2c_info);
+        s3c_nand_set_platdata(&bast_nand_info);
         s3c24xx_fb_set_platdata(&bast_fb_info);
         platform_add_devices(bast_devices, ARRAY_SIZE(bast_devices));
 
@@ -647,6 +653,7 @@ static void __init bast_init(void)
 
         usb_simtec_init();
         nor_simtec_init();
+        simtec_audio_add(NULL, true, &bast_audio);
 
         s3c_cpufreq_setboard(&bast_cpufreq);
 }
diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c
index d9cd5ddecf4a..49053254c98d 100644
--- a/arch/arm/mach-s3c2410/mach-h1940.c
+++ b/arch/arm/mach-s3c2410/mach-h1940.c
@@ -21,6 +21,11 @@
 #include <linux/serial_core.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/pwm_backlight.h>
+#include <video/platform_lcd.h>
+
+#include <linux/mmc/host.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -32,9 +37,12 @@
 
 #include <plat/regs-serial.h>
 #include <mach/regs-lcd.h>
-#include <mach/regs-gpio.h>
 #include <mach/regs-clock.h>
 
+#include <mach/regs-gpio.h>
+#include <mach/gpio-fns.h>
+#include <mach/gpio-nrs.h>
+
 #include <mach/h1940.h>
 #include <mach/h1940-latch.h>
 #include <mach/fb.h>
@@ -46,6 +54,7 @@
 #include <plat/cpu.h>
 #include <plat/pll.h>
 #include <plat/pm.h>
+#include <plat/mci.h>
 
 static struct map_desc h1940_iodesc[] __initdata = {
         [0] = {
@@ -171,16 +180,90 @@ static struct s3c2410fb_mach_info h1940_fb_info __initdata = {
         .gpdup_mask=    0xffffffff,
 };
 
-static struct platform_device s3c_device_leds = {
+static struct platform_device h1940_device_leds = {
         .name             = "h1940-leds",
         .id               = -1,
 };
 
-static struct platform_device s3c_device_bluetooth = {
+static struct platform_device h1940_device_bluetooth = {
         .name             = "h1940-bt",
         .id               = -1,
 };
 
+static struct s3c24xx_mci_pdata h1940_mmc_cfg = {
+        .gpio_detect   = S3C2410_GPF(5),
+        .gpio_wprotect = S3C2410_GPH(8),
+        .set_power     = NULL,
+        .ocr_avail     = MMC_VDD_32_33,
+};
+
+static int h1940_backlight_init(struct device *dev)
+{
+        gpio_request(S3C2410_GPB(0), "Backlight");
+
+        s3c2410_gpio_setpin(S3C2410_GPB(0), 0);
+        s3c2410_gpio_pullup(S3C2410_GPB(0), 0);
+        s3c2410_gpio_cfgpin(S3C2410_GPB(0), S3C2410_GPB0_TOUT0);
+
+        return 0;
+}
+
+static void h1940_backlight_exit(struct device *dev)
+{
+        s3c2410_gpio_cfgpin(S3C2410_GPB(0), 1/*S3C2410_GPB0_OUTP*/);
+}
+
+static struct platform_pwm_backlight_data backlight_data = {
+        .pwm_id         = 0,
+        .max_brightness = 100,
+        .dft_brightness = 50,
+        /* tcnt = 0x31 */
+        .pwm_period_ns  = 36296,
+        .init           = h1940_backlight_init,
+        .exit           = h1940_backlight_exit,
+};
+
+static struct platform_device h1940_backlight = {
+        .name = "pwm-backlight",
+        .dev  = {
+                .parent = &s3c_device_timer[0].dev,
+                .platform_data = &backlight_data,
+        },
+        .id   = -1,
+};
+
+static void h1940_lcd_power_set(struct plat_lcd_data *pd,
+                                        unsigned int power)
+{
+        int value;
+
+        if (!power) {
+                /* set to 3ec */
+                s3c2410_gpio_setpin(S3C2410_GPC(0), 0);
+                /* wait for 3ac */
+                do {
+                        value = s3c2410_gpio_getpin(S3C2410_GPC(6));
+                } while (value);
+                /* set to 38c */
+                s3c2410_gpio_setpin(S3C2410_GPC(5), 0);
+        } else {
+                /* Set to 3ac */
+                s3c2410_gpio_setpin(S3C2410_GPC(5), 1);
+                /* Set to 3ad */
+                s3c2410_gpio_setpin(S3C2410_GPC(0), 1);
+        }
+}
+
+static struct plat_lcd_data h1940_lcd_power_data = {
+        .set_power      = h1940_lcd_power_set,
+};
+
+static struct platform_device h1940_lcd_powerdev = {
+        .name                   = "platform-lcd",
+        .dev.parent             = &s3c_device_lcd.dev,
+        .dev.platform_data      = &h1940_lcd_power_data,
+};
+
 static struct platform_device *h1940_devices[] __initdata = {
         &s3c_device_usb,
         &s3c_device_lcd,
@@ -188,8 +271,13 @@ static struct platform_device *h1940_devices[] __initdata = {
         &s3c_device_i2c0,
         &s3c_device_iis,
         &s3c_device_usbgadget,
-        &s3c_device_leds,
-        &s3c_device_bluetooth,
+        &h1940_device_leds,
+        &h1940_device_bluetooth,
+        &s3c_device_sdi,
+        &s3c_device_rtc,
+        &s3c_device_timer[0],
+        &h1940_backlight,
+        &h1940_lcd_powerdev,
 };
 
 static void __init h1940_map_io(void)
@@ -219,6 +307,8 @@ static void __init h1940_init(void)
         s3c24xx_udc_set_platdata(&h1940_udc_cfg);
         s3c_i2c0_set_platdata(NULL);
 
+        s3c_device_sdi.dev.platform_data = &h1940_mmc_cfg;
+
         /* Turn off suspend on both USB ports, and switch the
          * selectable USB port to USB device mode. */
 
@@ -231,6 +321,11 @@ static void __init h1940_init(void)
               | (0x03 << S3C24XX_PLLCON_SDIVSHIFT);
         writel(tmp, S3C2410_UPLLCON);
 
+        gpio_request(S3C2410_GPC(0), "LCD power");
+        gpio_request(S3C2410_GPC(5), "LCD power");
+        gpio_request(S3C2410_GPC(6), "LCD power");
+
+
         platform_add_devices(h1940_devices, ARRAY_SIZE(h1940_devices));
 }
 
diff --git a/arch/arm/mach-s3c2410/mach-n30.c b/arch/arm/mach-s3c2410/mach-n30.c
index 0f6ed61af415..0405712c2263 100644
--- a/arch/arm/mach-s3c2410/mach-n30.c
+++ b/arch/arm/mach-s3c2410/mach-n30.c
@@ -338,7 +338,7 @@ static struct platform_device *n35_devices[] __initdata = {
         &n35_button_device,
 };
 
-static struct s3c2410_platform_i2c n30_i2ccfg = {
+static struct s3c2410_platform_i2c __initdata n30_i2ccfg = {
         .flags          = 0,
         .slave_addr     = 0x10,
         .frequency      = 10*1000,
@@ -500,8 +500,8 @@ static void __init n30_init_irq(void)
 static void __init n30_init(void)
 {
         s3c24xx_fb_set_platdata(&n30_fb_info);
-        s3c_device_i2c0.dev.platform_data = &n30_i2ccfg;
         s3c24xx_udc_set_platdata(&n30_udc_cfg);
+        s3c_i2c0_set_platdata(&n30_i2ccfg);
 
         /* Turn off suspend on both USB ports, and switch the
          * selectable USB port to USB device mode. */
diff --git a/arch/arm/mach-s3c2410/mach-qt2410.c b/arch/arm/mach-s3c2410/mach-qt2410.c
index 2cc9849eb448..ab092bcda393 100644
--- a/arch/arm/mach-s3c2410/mach-qt2410.c
+++ b/arch/arm/mach-s3c2410/mach-qt2410.c
@@ -258,7 +258,7 @@ static struct platform_device *qt2410_devices[] __initdata = {
         &qt2410_led,
 };
 
-static struct mtd_partition qt2410_nand_part[] = {
+static struct mtd_partition __initdata qt2410_nand_part[] = {
         [0] = {
                 .name   = "U-Boot",
                 .size   = 0x30000,
@@ -286,7 +286,7 @@ static struct mtd_partition qt2410_nand_part[] = {
         },
 };
 
-static struct s3c2410_nand_set qt2410_nand_sets[] = {
+static struct s3c2410_nand_set __initdata qt2410_nand_sets[] = {
         [0] = {
                 .name           = "NAND",
                 .nr_chips       = 1,
@@ -299,7 +299,7 @@ static struct s3c2410_nand_set qt2410_nand_sets[] = {
  * chips and beyond.
  */
 
-static struct s3c2410_platform_nand qt2410_nand_info = {
+static struct s3c2410_platform_nand __initdata qt2410_nand_info = {
         .tacls          = 20,
         .twrph0         = 60,
         .twrph1         = 20,
@@ -331,7 +331,7 @@ static void __init qt2410_map_io(void)
 
 static void __init qt2410_machine_init(void)
 {
-        s3c_device_nand.dev.platform_data = &qt2410_nand_info;
+        s3c_nand_set_platdata(&qt2410_nand_info);
 
         switch (tft_type) {
         case 'p': /* production */
diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c
index 1628cc773a2c..0d61fb577170 100644
--- a/arch/arm/mach-s3c2410/mach-vr1000.c
+++ b/arch/arm/mach-s3c2410/mach-vr1000.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/mach-s3c2410/mach-vr1000.c
  *
- * Copyright (c) 2003-2005,2008 Simtec Electronics
+ * Copyright (c) 2003-2008 Simtec Electronics
  *   Ben Dooks <ben@simtec.co.uk>
  *
  * Machine support for Thorcom VR1000 board. Designed for Thorcom by
@@ -49,6 +49,7 @@
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <plat/iic.h>
+#include <plat/audio-simtec.h>
 
 #include "usb-simtec.h"
 #include "nor-simtec.h"
@@ -393,6 +394,7 @@ static void __init vr1000_init(void)
                                 ARRAY_SIZE(vr1000_i2c_devs));
 
         nor_simtec_init();
+        simtec_audio_add(NULL, true, NULL);
 }
 
 MACHINE_START(VR1000, "Thorcom-VR1000")
diff --git a/arch/arm/mach-s3c2410/pll.c b/arch/arm/mach-s3c2410/pll.c
index f178c2fd9d85..8338865e11c0 100644
--- a/arch/arm/mach-s3c2410/pll.c
+++ b/arch/arm/mach-s3c2410/pll.c
@@ -1,6 +1,6 @@
 /* arch/arm/mach-s3c2410/pll.c
  *
- * Copyright (c) 2006,2007 Simtec Electronics
+ * Copyright (c) 2006-2007 Simtec Electronics
  *      http://armlinux.simtec.co.uk/
  *      Ben Dooks <ben@simtec.co.uk>
  *      Vincent Sanders <vince@arm.linux.org.uk>
diff --git a/arch/arm/mach-s3c2410/usb-simtec.c b/arch/arm/mach-s3c2410/usb-simtec.c
index 50e25fc5f8ab..6b9d0d83a6f9 100644
--- a/arch/arm/mach-s3c2410/usb-simtec.c
+++ b/arch/arm/mach-s3c2410/usb-simtec.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/mach-s3c2410/usb-simtec.c
  *
- * Copyright (c) 2004,2005 Simtec Electronics
+ * Copyright 2004-2005 Simtec Electronics
  *   Ben Dooks <ben@simtec.co.uk>
  *
  * http://www.simtec.co.uk/products/EB2410ITX/
@@ -108,7 +108,7 @@ int usb_simtec_init(void)
 {
         int ret;
 
-        printk("USB Power Control, (c) 2004 Simtec Electronics\n");
+        printk("USB Power Control, Copyright 2004 Simtec Electronics\n");
 
         ret = gpio_request(S3C2410_GPB(4), "USB power control");
         if (ret < 0) {