1 files changed, 61 insertions, 295 deletions

diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig
index 0ab590ec4582..016b53f5d6fc 100644
--- a/arch/arm/mach-s3c2410/Kconfig
+++ b/arch/arm/mach-s3c2410/Kconfig
@@ -1,54 +1,51 @@
-if ARCH_S3C2410
+# arch/arm/mach-s3c2410/Kconfig
+#
+# Copyright 2007 Simtec Electronics
+#
+# Licensed under GPLv2
 
-menu "S3C24XX Implementations"
+config CPU_S3C2410
+        bool
+        depends on ARCH_S3C2410
+        select S3C2410_CLOCK
+        select S3C2410_GPIO
+        select S3C2410_PM if PM
+        help
+          Support for S3C2410 and S3C2410A family from the S3C24XX line
+          of Samsung Mobile CPUs.
 
-config MACH_AML_M5900
-        bool "AML M5900 Series"
-        select CPU_S3C2410
-        select PM_SIMTEC if PM
+config CPU_S3C2410_DMA
+        bool
+        depends on S3C2410_DMA && (CPU_S3C2410 || CPU_S3C2442)
+        default y if CPU_S3C2410 || CPU_S3C2442
         help
-           Say Y here if you are using the American Microsystems M5900 Series
-           <http://www.amltd.com>
+          DMA device selection for S3C2410 and compatible CPUs
 
-config MACH_ANUBIS
-        bool "Simtec Electronics ANUBIS"
-        select CPU_S3C2440
-        select PM_SIMTEC if PM
+config S3C2410_PM
+        bool
         help
-          Say Y here if you are using the Simtec Electronics ANUBIS
-          development system
+          Power Management code common to S3C2410 and better
 
-config MACH_OSIRIS
-        bool "Simtec IM2440D20 (OSIRIS) module"
-        select CPU_S3C2440
-        select PM_SIMTEC if PM
+config S3C2410_GPIO
+        bool
         help
-          Say Y here if you are using the Simtec IM2440D20 module, also
-          known as the Osiris.
+          GPIO code for S3C2410 and similar processors
 
-config ARCH_BAST
-        bool "Simtec Electronics BAST (EB2410ITX)"
-        select CPU_S3C2410
-        select PM_SIMTEC if PM
-        select ISA
+config S3C2410_CLOCK
+        bool
         help
-          Say Y here if you are using the Simtec Electronics EB2410ITX
-          development board (also known as BAST)
+          Clock code for the S3C2410, and similar processors
 
-          Product page: <http://www.simtec.co.uk/products/EB2410ITX/>.
 
-config BAST_PC104_IRQ
-        bool "BAST PC104 IRQ support"
-        depends on ARCH_BAST
-        default y
-        help
-          Say Y here to enable the PC104 IRQ routing on the
-          Simtec BAST (EB2410ITX)
+menu "S3C2410 Machines"
 
-config PM_H1940
-        bool
+config ARCH_SMDK2410
+        bool "SMDK2410/A9M2410"
+        select CPU_S3C2410
+        select MACH_SMDK
         help
-          Internal node for H1940 and related PM
+           Say Y here if you are using the SMDK2410 or the derived module A9M2410
+           <http://www.fsforth.de>
 
 config ARCH_H1940
         bool "IPAQ H1940"
@@ -57,7 +54,10 @@ config ARCH_H1940
         help
           Say Y here if you are using the HP IPAQ H1940
 
-          <http://www.handhelds.org/projects/h1940.html>.
+config PM_H1940
+        bool
+        help
+          Internal node for H1940 and related PM
 
 config MACH_N30
         bool "Acer N30"
@@ -65,53 +65,36 @@ config MACH_N30
         help
           Say Y here if you are using the Acer N30
 
-          <http://zoo.weinigel.se/n30>.
-
-config MACH_SMDK
-        bool
-        help
-          Common machine code for SMDK2410 and SMDK2440
-
-config ARCH_SMDK2410
-        bool "SMDK2410/A9M2410"
+config ARCH_BAST
+        bool "Simtec Electronics BAST (EB2410ITX)"
         select CPU_S3C2410
-        select MACH_SMDK
+        select PM_SIMTEC if PM
+        select ISA
         help
-           Say Y here if you are using the SMDK2410 or the derived module A9M2410
-           <http://www.fsforth.de>
+          Say Y here if you are using the Simtec Electronics EB2410ITX
+          development board (also known as BAST)
 
-config ARCH_S3C2440
-        bool "SMDK2440"
-        select CPU_S3C2440
-        select MACH_SMDK
+config MACH_OTOM
+        bool "NexVision OTOM Board"
+        select CPU_S3C2410
         help
-          Say Y here if you are using the SMDK2440.
-
-config SMDK2440_CPU2440
-        bool "SMDK2440 with S3C2440 CPU module"
-        depends on ARCH_S3C2440
-        default y if ARCH_S3C2440
-        select CPU_S3C2440
-
-config SMDK2440_CPU2442
-        bool "SMDM2440 with S3C2442 CPU module"
-        depends on ARCH_S3C2440
-        select CPU_S3C2442
+          Say Y here if you are using the Nex Vision OTOM board
 
-config MACH_S3C2413
-        bool
+config MACH_AML_M5900
+        bool "AML M5900 Series"
+        select CPU_S3C2410
+        select PM_SIMTEC if PM
         help
-          Internal node for S3C2413 version of SMDK2413, so that
-          machine_is_s3c2413() will work when MACH_SMDK2413 is
-          selected
+           Say Y here if you are using the American Microsystems M5900 Series
+           <http://www.amltd.com>
 
-config MACH_SMDK2413
-        bool "SMDK2413"
-        select CPU_S3C2412
-        select MACH_S3C2413
-        select MACH_SMDK
+config BAST_PC104_IRQ
+        bool "BAST PC104 IRQ support"
+        depends on ARCH_BAST
+        default y
         help
-          Say Y here if you are using an SMDK2413
+          Say Y here to enable the PC104 IRQ routing on the
+          Simtec BAST (EB2410ITX)
 
 config MACH_VR1000
         bool "Thorcom VR1000"
@@ -120,223 +103,6 @@ config MACH_VR1000
         help
           Say Y here if you are using the Thorcom VR1000 board.
 
-          This linux port is currently being maintained by Simtec, on behalf
-          of Thorcom. Any queries, please contact Thorcom first.
-
-config MACH_RX3715
-        bool "HP iPAQ rx3715"
-        select CPU_S3C2440
-        select PM_H1940 if PM
-        help
-          Say Y here if you are using the HP iPAQ rx3715.
-
-          See <http://www.handhelds.org/projects/rx3715.html> for more
-          information on this project
-
-config MACH_OTOM
-        bool "NexVision OTOM Board"
-        select CPU_S3C2410
-        help
-          Say Y here if you are using the Nex Vision OTOM board
-
-config MACH_NEXCODER_2440
-        bool "NexVision NEXCODER 2440 Light Board"
-        select CPU_S3C2440
-        help
-          Say Y here if you are using the Nex Vision NEXCODER 2440 Light Board
-
-config MACH_VSTMS
-        bool "VMSTMS"
-        select CPU_S3C2412
-        help
-          Say Y here if you are using an VSTMS board
 
 endmenu
 
-config S3C2410_CLOCK
-        bool
-        help
-          Clock code for the S3C2410, and similar processors
-
-config S3C2410_GPIO
-        bool
-        help
-          GPIO code for S3C2410 and similar processors
-
-config S3C2410_PM
-        bool
-        help
-          Power Management code common to S3C2410 and better
-
-config CPU_S3C2410_DMA
-        bool
-        depends on S3C2410_DMA && (CPU_S3C2410 || CPU_S3C2442)
-        default y if CPU_S3C2410 || CPU_S3C2442
-        help
-          DMA device selection for S3C2410 and compatible CPUs
-
-config CPU_S3C2410
-        bool
-        depends on ARCH_S3C2410
-        select S3C2410_CLOCK
-        select S3C2410_GPIO
-        select S3C2410_PM if PM
-        help
-          Support for S3C2410 and S3C2410A family from the S3C24XX line
-          of Samsung Mobile CPUs.
-
-# internal node to signify if we are only dealing with an S3C2412
-
-config CPU_S3C2412_ONLY
-        bool
-        depends on ARCH_S3C2410 && !CPU_S3C2400 && !CPU_S3C2410 && \
-                   !CPU_S3C2440 && !CPU_S3C2442 && CPU_S3C2412
-        default y if CPU_S3C2412
-
-config S3C2412_PM
-        bool
-        help
-          Internal config node to apply S3C2412 power management
-
-config S3C2412_DMA
-        bool
-        depends on CPU_S3C2412
-        help
-          Internal config node for S3C2412 DMA support
-
-config CPU_S3C2412
-        bool
-        depends on ARCH_S3C2410
-        select S3C2412_PM if PM
-        select S3C2412_DMA if S3C2410_DMA
-        help
-          Support for the S3C2412 and S3C2413 SoCs from the S3C24XX line
-
-config CPU_S3C244X
-        bool
-        depends on ARCH_S3C2410 && (CPU_S3C2440 || CPU_S3C2442)
-        help
-          Support for S3C2440 and S3C2442 Samsung Mobile CPU based systems.
-
-config S3C2440_DMA
-        bool
-        depends on ARCH_S3C2410 && CPU_S3C24405B
-        help
-          Support for S3C2440 specific DMA code5A
-
-config CPU_S3C2440
-        bool
-        depends on ARCH_S3C2410
-        select S3C2410_CLOCK
-        select S3C2410_PM if PM
-        select S3C2410_GPIO
-        select S3C2440_DMA if S3C2410_DMA
-        select CPU_S3C244X
-        help
-          Support for S3C2440 Samsung Mobile CPU based systems.
-
-config CPU_S3C2442
-        bool
-        depends on ARCH_S3C2420
-        select S3C2410_CLOCK
-        select S3C2410_GPIO
-        select S3C2410_PM if PM
-        select CPU_S3C244X
-        help
-          Support for S3C2442 Samsung Mobile CPU based systems.
-
-comment "S3C2410 Boot"
-
-config S3C2410_BOOT_WATCHDOG
-        bool "S3C2410 Initialisation watchdog"
-        depends on ARCH_S3C2410 && S3C2410_WATCHDOG
-        help
-          Say y to enable the watchdog during the kernel decompression
-          stage. If the kernel fails to uncompress, then the watchdog
-          will trigger a reset and the system should restart.
-
-          Although this uses the same hardware unit as the kernel watchdog
-          driver, it is not a replacement for it. If you use this option,
-          you will have to use the watchdg driver to either stop the timeout
-          or restart it. If you do not, then your kernel will reboot after
-          startup.
-
-          The driver uses a fixed timeout value, so the exact time till the
-          system resets depends on the value of PCLK. The timeout on an
-          200MHz s3c2410 should be about 30 seconds.
-
-config S3C2410_BOOT_ERROR_RESET
-        bool "S3C2410 Reboot on decompression error"
-        depends on ARCH_S3C2410
-        help
-          Say y here to use the watchdog to reset the system if the
-          kernel decompressor detects an error during decompression.
-
-
-comment "S3C2410 Setup"
-
-config S3C2410_DMA
-        bool "S3C2410 DMA support"
-        depends on ARCH_S3C2410
-        help
-          S3C2410 DMA support. This is needed for drivers like sound which
-          use the S3C2410's DMA system to move data to and from the
-          peripheral blocks.
-
-config S3C2410_DMA_DEBUG
-        bool "S3C2410 DMA support debug"
-        depends on ARCH_S3C2410 && S3C2410_DMA
-        help
-          Enable debugging output for the DMA code. This option sends info
-          to the kernel log, at priority KERN_DEBUG.
-
-          Note, it is easy to create and fill the log buffer in a small
-          amount of time, as well as using an significant percentage of
-          the CPU time doing so.
-
-config S3C2410_PM_DEBUG
-        bool "S3C2410 PM Suspend debug"
-        depends on ARCH_S3C2410 && PM
-        help
-          Say Y here if you want verbose debugging from the PM Suspend and
-          Resume code. See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt>
-          for more information.
-
-config S3C2410_PM_CHECK
-        bool "S3C2410 PM Suspend Memory CRC"
-        depends on ARCH_S3C2410 && PM && CRC32
-        help
-          Enable the PM code's memory area checksum over sleep. This option
-          will generate CRCs of all blocks of memory, and store them before
-          going to sleep. The blocks are then checked on resume for any
-          errors.
-
-config S3C2410_PM_CHECK_CHUNKSIZE
-        int "S3C2410 PM Suspend CRC Chunksize (KiB)"
-        depends on ARCH_S3C2410 && PM && S3C2410_PM_CHECK
-        default 64
-        help
-          Set the chunksize in Kilobytes of the CRC for checking memory
-          corruption over suspend and resume. A smaller value will mean that
-          the CRC data block will take more memory, but wil identify any
-          faults with better precision.
-
-config PM_SIMTEC
-        bool
-        help
-          Common power management code for systems that are
-          compatible with the Simtec style of power management
-
-config S3C2410_LOWLEVEL_UART_PORT
-        int "S3C2410 UART to use for low-level messages"
-        default 0
-        help
-          Choice of which UART port to use for the low-level messages,
-          such as the `Uncompressing...` at start time. The value of
-          this configuration should be between zero and two. The port
-          must have been initialised by the boot-loader before use.
-
-          Note, this does not affect the port used by the debug messages,
-          which is a separate configuration.
-
-endif