diff options
Diffstat (limited to 'arch/arm/mach-pxa')
-rw-r--r-- | arch/arm/mach-pxa/Kconfig | 5 | ||||
-rw-r--r-- | arch/arm/mach-pxa/Makefile | 1 | ||||
-rw-r--r-- | arch/arm/mach-pxa/generic.c | 6 | ||||
-rw-r--r-- | arch/arm/mach-pxa/lpd270.c | 393 | ||||
-rw-r--r-- | arch/arm/mach-pxa/spitz.c | 2 |
5 files changed, 407 insertions, 0 deletions
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index c1d77f5b3823..0104fd142e70 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig | |||
@@ -10,6 +10,11 @@ config ARCH_LUBBOCK | |||
10 | select PXA25x | 10 | select PXA25x |
11 | select SA1111 | 11 | select SA1111 |
12 | 12 | ||
13 | config MACH_LOGICPD_PXA270 | ||
14 | bool "LogicPD PXA270 Card Engine Development Platform" | ||
15 | select PXA27x | ||
16 | select IWMMXT | ||
17 | |||
13 | config MACH_MAINSTONE | 18 | config MACH_MAINSTONE |
14 | bool "Intel HCDDBBVA0 Development Platform" | 19 | bool "Intel HCDDBBVA0 Development Platform" |
15 | select PXA27x | 20 | select PXA27x |
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile index 382644401a4d..4e8a983e2b83 100644 --- a/arch/arm/mach-pxa/Makefile +++ b/arch/arm/mach-pxa/Makefile | |||
@@ -9,6 +9,7 @@ obj-$(CONFIG_PXA27x) += pxa27x.o | |||
9 | 9 | ||
10 | # Specific board support | 10 | # Specific board support |
11 | obj-$(CONFIG_ARCH_LUBBOCK) += lubbock.o | 11 | obj-$(CONFIG_ARCH_LUBBOCK) += lubbock.o |
12 | obj-$(CONFIG_MACH_LOGICPD_PXA270) += lpd270.o | ||
12 | obj-$(CONFIG_MACH_MAINSTONE) += mainstone.o | 13 | obj-$(CONFIG_MACH_MAINSTONE) += mainstone.o |
13 | obj-$(CONFIG_ARCH_PXA_IDP) += idp.o | 14 | obj-$(CONFIG_ARCH_PXA_IDP) += idp.o |
14 | obj-$(CONFIG_PXA_SHARP_C7xx) += corgi.o corgi_ssp.o corgi_lcd.o sharpsl_pm.o corgi_pm.o | 15 | obj-$(CONFIG_PXA_SHARP_C7xx) += corgi.o corgi_ssp.o corgi_lcd.o sharpsl_pm.o corgi_pm.o |
diff --git a/arch/arm/mach-pxa/generic.c b/arch/arm/mach-pxa/generic.c index 9b48a90aefce..5efa84749f37 100644 --- a/arch/arm/mach-pxa/generic.c +++ b/arch/arm/mach-pxa/generic.c | |||
@@ -319,6 +319,11 @@ void __init pxa_set_ficp_info(struct pxaficp_platform_data *info) | |||
319 | pxaficp_device.dev.platform_data = info; | 319 | pxaficp_device.dev.platform_data = info; |
320 | } | 320 | } |
321 | 321 | ||
322 | static struct platform_device pxartc_device = { | ||
323 | .name = "sa1100-rtc", | ||
324 | .id = -1, | ||
325 | }; | ||
326 | |||
322 | static struct platform_device *devices[] __initdata = { | 327 | static struct platform_device *devices[] __initdata = { |
323 | &pxamci_device, | 328 | &pxamci_device, |
324 | &udc_device, | 329 | &udc_device, |
@@ -329,6 +334,7 @@ static struct platform_device *devices[] __initdata = { | |||
329 | &pxaficp_device, | 334 | &pxaficp_device, |
330 | &i2c_device, | 335 | &i2c_device, |
331 | &i2s_device, | 336 | &i2s_device, |
337 | &pxartc_device, | ||
332 | }; | 338 | }; |
333 | 339 | ||
334 | static int __init pxa_init(void) | 340 | static int __init pxa_init(void) |
diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c new file mode 100644 index 000000000000..ec0f43a102c7 --- /dev/null +++ b/arch/arm/mach-pxa/lpd270.c | |||
@@ -0,0 +1,393 @@ | |||
1 | /* | ||
2 | * linux/arch/arm/mach-pxa/lpd270.c | ||
3 | * | ||
4 | * Support for the LogicPD PXA270 Card Engine. | ||
5 | * Derived from the mainstone code, which carries these notices: | ||
6 | * | ||
7 | * Author: Nicolas Pitre | ||
8 | * Created: Nov 05, 2002 | ||
9 | * Copyright: MontaVista Software Inc. | ||
10 | * | ||
11 | * This program is free software; you can redistribute it and/or modify | ||
12 | * it under the terms of the GNU General Public License version 2 as | ||
13 | * published by the Free Software Foundation. | ||
14 | */ | ||
15 | |||
16 | #include <linux/init.h> | ||
17 | #include <linux/platform_device.h> | ||
18 | #include <linux/sysdev.h> | ||
19 | #include <linux/interrupt.h> | ||
20 | #include <linux/sched.h> | ||
21 | #include <linux/bitops.h> | ||
22 | #include <linux/fb.h> | ||
23 | #include <linux/ioport.h> | ||
24 | #include <linux/mtd/mtd.h> | ||
25 | #include <linux/mtd/partitions.h> | ||
26 | |||
27 | #include <asm/types.h> | ||
28 | #include <asm/setup.h> | ||
29 | #include <asm/memory.h> | ||
30 | #include <asm/mach-types.h> | ||
31 | #include <asm/hardware.h> | ||
32 | #include <asm/irq.h> | ||
33 | #include <asm/sizes.h> | ||
34 | |||
35 | #include <asm/mach/arch.h> | ||
36 | #include <asm/mach/map.h> | ||
37 | #include <asm/mach/irq.h> | ||
38 | #include <asm/mach/flash.h> | ||
39 | |||
40 | #include <asm/arch/pxa-regs.h> | ||
41 | #include <asm/arch/lpd270.h> | ||
42 | #include <asm/arch/audio.h> | ||
43 | #include <asm/arch/pxafb.h> | ||
44 | #include <asm/arch/mmc.h> | ||
45 | #include <asm/arch/irda.h> | ||
46 | #include <asm/arch/ohci.h> | ||
47 | |||
48 | #include "generic.h" | ||
49 | |||
50 | |||
51 | static unsigned int lpd270_irq_enabled; | ||
52 | |||
53 | static void lpd270_mask_irq(unsigned int irq) | ||
54 | { | ||
55 | int lpd270_irq = irq - LPD270_IRQ(0); | ||
56 | |||
57 | __raw_writew(~(1 << lpd270_irq), LPD270_INT_STATUS); | ||
58 | |||
59 | lpd270_irq_enabled &= ~(1 << lpd270_irq); | ||
60 | __raw_writew(lpd270_irq_enabled, LPD270_INT_MASK); | ||
61 | } | ||
62 | |||
63 | static void lpd270_unmask_irq(unsigned int irq) | ||
64 | { | ||
65 | int lpd270_irq = irq - LPD270_IRQ(0); | ||
66 | |||
67 | lpd270_irq_enabled |= 1 << lpd270_irq; | ||
68 | __raw_writew(lpd270_irq_enabled, LPD270_INT_MASK); | ||
69 | } | ||
70 | |||
71 | static struct irqchip lpd270_irq_chip = { | ||
72 | .ack = lpd270_mask_irq, | ||
73 | .mask = lpd270_mask_irq, | ||
74 | .unmask = lpd270_unmask_irq, | ||
75 | }; | ||
76 | |||
77 | static void lpd270_irq_handler(unsigned int irq, struct irqdesc *desc, | ||
78 | struct pt_regs *regs) | ||
79 | { | ||
80 | unsigned long pending; | ||
81 | |||
82 | pending = __raw_readw(LPD270_INT_STATUS) & lpd270_irq_enabled; | ||
83 | do { | ||
84 | GEDR(0) = GPIO_bit(0); /* clear useless edge notification */ | ||
85 | if (likely(pending)) { | ||
86 | irq = LPD270_IRQ(0) + __ffs(pending); | ||
87 | desc = irq_desc + irq; | ||
88 | desc_handle_irq(irq, desc, regs); | ||
89 | |||
90 | pending = __raw_readw(LPD270_INT_STATUS) & | ||
91 | lpd270_irq_enabled; | ||
92 | } | ||
93 | } while (pending); | ||
94 | } | ||
95 | |||
96 | static void __init lpd270_init_irq(void) | ||
97 | { | ||
98 | int irq; | ||
99 | |||
100 | pxa_init_irq(); | ||
101 | |||
102 | __raw_writew(0, LPD270_INT_MASK); | ||
103 | __raw_writew(0, LPD270_INT_STATUS); | ||
104 | |||
105 | /* setup extra LogicPD PXA270 irqs */ | ||
106 | for (irq = LPD270_IRQ(2); irq <= LPD270_IRQ(4); irq++) { | ||
107 | set_irq_chip(irq, &lpd270_irq_chip); | ||
108 | set_irq_handler(irq, do_level_IRQ); | ||
109 | set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); | ||
110 | } | ||
111 | set_irq_chained_handler(IRQ_GPIO(0), lpd270_irq_handler); | ||
112 | set_irq_type(IRQ_GPIO(0), IRQT_FALLING); | ||
113 | } | ||
114 | |||
115 | |||
116 | #ifdef CONFIG_PM | ||
117 | static int lpd270_irq_resume(struct sys_device *dev) | ||
118 | { | ||
119 | __raw_writew(lpd270_irq_enabled, LPD270_INT_MASK); | ||
120 | return 0; | ||
121 | } | ||
122 | |||
123 | static struct sysdev_class lpd270_irq_sysclass = { | ||
124 | set_kset_name("cpld_irq"), | ||
125 | .resume = lpd270_irq_resume, | ||
126 | }; | ||
127 | |||
128 | static struct sys_device lpd270_irq_device = { | ||
129 | .cls = &lpd270_irq_sysclass, | ||
130 | }; | ||
131 | |||
132 | static int __init lpd270_irq_device_init(void) | ||
133 | { | ||
134 | int ret = sysdev_class_register(&lpd270_irq_sysclass); | ||
135 | if (ret == 0) | ||
136 | ret = sysdev_register(&lpd270_irq_device); | ||
137 | return ret; | ||
138 | } | ||
139 | |||
140 | device_initcall(lpd270_irq_device_init); | ||
141 | #endif | ||
142 | |||
143 | |||
144 | static struct resource smc91x_resources[] = { | ||
145 | [0] = { | ||
146 | .start = LPD270_ETH_PHYS, | ||
147 | .end = (LPD270_ETH_PHYS + 0xfffff), | ||
148 | .flags = IORESOURCE_MEM, | ||
149 | }, | ||
150 | [1] = { | ||
151 | .start = LPD270_ETHERNET_IRQ, | ||
152 | .end = LPD270_ETHERNET_IRQ, | ||
153 | .flags = IORESOURCE_IRQ, | ||
154 | }, | ||
155 | }; | ||
156 | |||
157 | static struct platform_device smc91x_device = { | ||
158 | .name = "smc91x", | ||
159 | .id = 0, | ||
160 | .num_resources = ARRAY_SIZE(smc91x_resources), | ||
161 | .resource = smc91x_resources, | ||
162 | }; | ||
163 | |||
164 | static struct platform_device lpd270_audio_device = { | ||
165 | .name = "pxa2xx-ac97", | ||
166 | .id = -1, | ||
167 | }; | ||
168 | |||
169 | static struct resource lpd270_flash_resources[] = { | ||
170 | [0] = { | ||
171 | .start = PXA_CS0_PHYS, | ||
172 | .end = PXA_CS0_PHYS + SZ_64M - 1, | ||
173 | .flags = IORESOURCE_MEM, | ||
174 | }, | ||
175 | [1] = { | ||
176 | .start = PXA_CS1_PHYS, | ||
177 | .end = PXA_CS1_PHYS + SZ_64M - 1, | ||
178 | .flags = IORESOURCE_MEM, | ||
179 | }, | ||
180 | }; | ||
181 | |||
182 | static struct mtd_partition lpd270_flash0_partitions[] = { | ||
183 | { | ||
184 | .name = "Bootloader", | ||
185 | .size = 0x00040000, | ||
186 | .offset = 0, | ||
187 | .mask_flags = MTD_WRITEABLE /* force read-only */ | ||
188 | }, { | ||
189 | .name = "Kernel", | ||
190 | .size = 0x00400000, | ||
191 | .offset = 0x00040000, | ||
192 | }, { | ||
193 | .name = "Filesystem", | ||
194 | .size = MTDPART_SIZ_FULL, | ||
195 | .offset = 0x00440000 | ||
196 | }, | ||
197 | }; | ||
198 | |||
199 | static struct flash_platform_data lpd270_flash_data[2] = { | ||
200 | { | ||
201 | .name = "processor-flash", | ||
202 | .map_name = "cfi_probe", | ||
203 | .parts = lpd270_flash0_partitions, | ||
204 | .nr_parts = ARRAY_SIZE(lpd270_flash0_partitions), | ||
205 | }, { | ||
206 | .name = "mainboard-flash", | ||
207 | .map_name = "cfi_probe", | ||
208 | .parts = NULL, | ||
209 | .nr_parts = 0, | ||
210 | } | ||
211 | }; | ||
212 | |||
213 | static struct platform_device lpd270_flash_device[2] = { | ||
214 | { | ||
215 | .name = "pxa2xx-flash", | ||
216 | .id = 0, | ||
217 | .dev = { | ||
218 | .platform_data = &lpd270_flash_data[0], | ||
219 | }, | ||
220 | .resource = &lpd270_flash_resources[0], | ||
221 | .num_resources = 1, | ||
222 | }, { | ||
223 | .name = "pxa2xx-flash", | ||
224 | .id = 1, | ||
225 | .dev = { | ||
226 | .platform_data = &lpd270_flash_data[1], | ||
227 | }, | ||
228 | .resource = &lpd270_flash_resources[1], | ||
229 | .num_resources = 1, | ||
230 | }, | ||
231 | }; | ||
232 | |||
233 | static void lpd270_backlight_power(int on) | ||
234 | { | ||
235 | if (on) { | ||
236 | pxa_gpio_mode(GPIO16_PWM0_MD); | ||
237 | pxa_set_cken(CKEN0_PWM0, 1); | ||
238 | PWM_CTRL0 = 0; | ||
239 | PWM_PWDUTY0 = 0x3ff; | ||
240 | PWM_PERVAL0 = 0x3ff; | ||
241 | } else { | ||
242 | PWM_CTRL0 = 0; | ||
243 | PWM_PWDUTY0 = 0x0; | ||
244 | PWM_PERVAL0 = 0x3FF; | ||
245 | pxa_set_cken(CKEN0_PWM0, 0); | ||
246 | } | ||
247 | } | ||
248 | |||
249 | /* 5.7" TFT QVGA (LoLo display number 1) */ | ||
250 | static struct pxafb_mach_info sharp_lq057q3dc02 __initdata = { | ||
251 | .pixclock = 100000, | ||
252 | .xres = 240, | ||
253 | .yres = 320, | ||
254 | .bpp = 16, | ||
255 | .hsync_len = 64, | ||
256 | .left_margin = 0x27, | ||
257 | .right_margin = 0x09, | ||
258 | .vsync_len = 0x04, | ||
259 | .upper_margin = 0x08, | ||
260 | .lower_margin = 0x14, | ||
261 | .sync = 0, | ||
262 | .lccr0 = 0x07800080, | ||
263 | .lccr3 = 0x04400007, | ||
264 | .pxafb_backlight_power = lpd270_backlight_power, | ||
265 | }; | ||
266 | |||
267 | /* 6.4" TFT VGA (LoLo display number 5) */ | ||
268 | static struct pxafb_mach_info sharp_lq64d343 __initdata = { | ||
269 | .pixclock = 20000, | ||
270 | .xres = 640, | ||
271 | .yres = 480, | ||
272 | .bpp = 16, | ||
273 | .hsync_len = 49, | ||
274 | .left_margin = 0x89, | ||
275 | .right_margin = 0x19, | ||
276 | .vsync_len = 18, | ||
277 | .upper_margin = 0x22, | ||
278 | .lower_margin = 0, | ||
279 | .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, | ||
280 | .lccr0 = 0x07800080, | ||
281 | .lccr3 = 0x04400001, | ||
282 | .pxafb_backlight_power = lpd270_backlight_power, | ||
283 | }; | ||
284 | |||
285 | /* 3.5" TFT QVGA (LoLo display number 8) */ | ||
286 | static struct pxafb_mach_info sharp_lq035q7db02_20 __initdata = { | ||
287 | .pixclock = 100000, | ||
288 | .xres = 240, | ||
289 | .yres = 320, | ||
290 | .bpp = 16, | ||
291 | .hsync_len = 0x34, | ||
292 | .left_margin = 0x09, | ||
293 | .right_margin = 0x09, | ||
294 | .vsync_len = 0x08, | ||
295 | .upper_margin = 0x05, | ||
296 | .lower_margin = 0x14, | ||
297 | .sync = 0, | ||
298 | .lccr0 = 0x07800080, | ||
299 | .lccr3 = 0x04400007, | ||
300 | .pxafb_backlight_power = lpd270_backlight_power, | ||
301 | }; | ||
302 | |||
303 | static struct platform_device *platform_devices[] __initdata = { | ||
304 | &smc91x_device, | ||
305 | &lpd270_audio_device, | ||
306 | &lpd270_flash_device[0], | ||
307 | &lpd270_flash_device[1], | ||
308 | }; | ||
309 | |||
310 | static int lpd270_ohci_init(struct device *dev) | ||
311 | { | ||
312 | /* setup Port1 GPIO pin. */ | ||
313 | pxa_gpio_mode(88 | GPIO_ALT_FN_1_IN); /* USBHPWR1 */ | ||
314 | pxa_gpio_mode(89 | GPIO_ALT_FN_2_OUT); /* USBHPEN1 */ | ||
315 | |||
316 | /* Set the Power Control Polarity Low and Power Sense | ||
317 | Polarity Low to active low. */ | ||
318 | UHCHR = (UHCHR | UHCHR_PCPL | UHCHR_PSPL) & | ||
319 | ~(UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSEP3 | UHCHR_SSE); | ||
320 | |||
321 | return 0; | ||
322 | } | ||
323 | |||
324 | static struct pxaohci_platform_data lpd270_ohci_platform_data = { | ||
325 | .port_mode = PMM_PERPORT_MODE, | ||
326 | .init = lpd270_ohci_init, | ||
327 | }; | ||
328 | |||
329 | static void __init lpd270_init(void) | ||
330 | { | ||
331 | lpd270_flash_data[0].width = (BOOT_DEF & 1) ? 2 : 4; | ||
332 | lpd270_flash_data[1].width = 4; | ||
333 | |||
334 | /* | ||
335 | * System bus arbiter setting: | ||
336 | * - Core_Park | ||
337 | * - LCD_wt:DMA_wt:CORE_Wt = 2:3:4 | ||
338 | */ | ||
339 | ARB_CNTRL = ARB_CORE_PARK | 0x234; | ||
340 | |||
341 | /* | ||
342 | * On LogicPD PXA270, we route AC97_SYSCLK via GPIO45. | ||
343 | */ | ||
344 | pxa_gpio_mode(GPIO45_SYSCLK_AC97_MD); | ||
345 | |||
346 | platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); | ||
347 | |||
348 | // set_pxa_fb_info(&sharp_lq057q3dc02); | ||
349 | set_pxa_fb_info(&sharp_lq64d343); | ||
350 | // set_pxa_fb_info(&sharp_lq035q7db02_20); | ||
351 | |||
352 | pxa_set_ohci_info(&lpd270_ohci_platform_data); | ||
353 | } | ||
354 | |||
355 | |||
356 | static struct map_desc lpd270_io_desc[] __initdata = { | ||
357 | { | ||
358 | .virtual = LPD270_CPLD_VIRT, | ||
359 | .pfn = __phys_to_pfn(LPD270_CPLD_PHYS), | ||
360 | .length = LPD270_CPLD_SIZE, | ||
361 | .type = MT_DEVICE, | ||
362 | }, | ||
363 | }; | ||
364 | |||
365 | static void __init lpd270_map_io(void) | ||
366 | { | ||
367 | pxa_map_io(); | ||
368 | iotable_init(lpd270_io_desc, ARRAY_SIZE(lpd270_io_desc)); | ||
369 | |||
370 | /* initialize sleep mode regs (wake-up sources, etc) */ | ||
371 | PGSR0 = 0x00008800; | ||
372 | PGSR1 = 0x00000002; | ||
373 | PGSR2 = 0x0001FC00; | ||
374 | PGSR3 = 0x00001F81; | ||
375 | PWER = 0xC0000002; | ||
376 | PRER = 0x00000002; | ||
377 | PFER = 0x00000002; | ||
378 | |||
379 | /* for use I SRAM as framebuffer. */ | ||
380 | PSLR |= 0x00000F04; | ||
381 | PCFR = 0x00000066; | ||
382 | } | ||
383 | |||
384 | MACHINE_START(LOGICPD_PXA270, "LogicPD PXA270 Card Engine") | ||
385 | /* Maintainer: Peter Barada */ | ||
386 | .phys_io = 0x40000000, | ||
387 | .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, | ||
388 | .boot_params = 0xa0000100, | ||
389 | .map_io = lpd270_map_io, | ||
390 | .init_irq = lpd270_init_irq, | ||
391 | .timer = &pxa_timer, | ||
392 | .init_machine = lpd270_init, | ||
393 | MACHINE_END | ||
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index 30ec317bbb97..0dbb079ecd25 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c | |||
@@ -467,6 +467,8 @@ struct platform_device akitaioexp_device = { | |||
467 | .id = -1, | 467 | .id = -1, |
468 | }; | 468 | }; |
469 | 469 | ||
470 | EXPORT_SYMBOL_GPL(akitaioexp_device); | ||
471 | |||
470 | static void __init akita_init(void) | 472 | static void __init akita_init(void) |
471 | { | 473 | { |
472 | spitz_ficp_platform_data.transceiver_mode = akita_irda_transceiver_mode; | 474 | spitz_ficp_platform_data.transceiver_mode = akita_irda_transceiver_mode; |