17 files changed, 84 insertions, 28 deletions

diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index 3e66d9099eab..17d3fbd368a3 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -289,12 +289,12 @@ config MACH_LITTLETON
 config MACH_TAVOREVB
         bool "PXA930 Evaluation Board (aka TavorEVB)"
         select PXA3xx
-        select PXA930
+        select CPU_PXA930
 
 config MACH_SAAR
         bool "PXA930 Handheld Platform (aka SAAR)"
         select PXA3xx
-        select PXA930
+        select CPU_PXA930
 
 config MACH_ARMCORE
         bool "CompuLab CM-X255/CM-X270 modules"
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index cdf21dd135b4..930e364ccde9 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -427,12 +427,22 @@ static struct pxa2xx_spi_master corgi_spi_info = {
         .num_chipselect = 3,
 };
 
+static void corgi_wait_for_hsync(void)
+{
+        while (gpio_get_value(CORGI_GPIO_HSYNC))
+                cpu_relax();
+
+        while (!gpio_get_value(CORGI_GPIO_HSYNC))
+                cpu_relax();
+}
+
 static struct ads7846_platform_data corgi_ads7846_info = {
         .model                  = 7846,
         .vref_delay_usecs       = 100,
         .x_plate_ohms           = 419,
         .y_plate_ohms           = 486,
         .gpio_pendown           = CORGI_GPIO_TP_INT,
+        .wait_for_sync          = corgi_wait_for_hsync,
 };
 
 static void corgi_ads7846_cs(u32 command)
diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c
index d245e59c51b1..29970f703f3c 100644
--- a/arch/arm/mach-pxa/devices.c
+++ b/arch/arm/mach-pxa/devices.c
@@ -72,7 +72,10 @@ void __init pxa_set_mci_info(struct pxamci_platform_data *info)
 }
 
 
-static struct pxa2xx_udc_mach_info pxa_udc_info;
+static struct pxa2xx_udc_mach_info pxa_udc_info = {
+        .gpio_pullup = -1,
+        .gpio_vbus   = -1,
+};
 
 void __init pxa_set_udc_info(struct pxa2xx_udc_mach_info *info)
 {
diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c
index 92ba16e1b6fc..7db966dc29ce 100644
--- a/arch/arm/mach-pxa/ezx.c
+++ b/arch/arm/mach-pxa/ezx.c
@@ -111,9 +111,9 @@ static unsigned long ezx_pin_config[] __initdata = {
         GPIO25_SSP1_TXD,
         GPIO26_SSP1_RXD,
         GPIO24_GPIO,                            /* pcap chip select */
-        GPIO1_GPIO,                             /* pcap interrupt */
-        GPIO4_GPIO,                             /* WDI_AP */
-        GPIO55_GPIO,                            /* SYS_RESTART */
+        GPIO1_GPIO | WAKEUP_ON_EDGE_RISE,       /* pcap interrupt */
+        GPIO4_GPIO | MFP_LPM_DRIVE_HIGH,        /* WDI_AP */
+        GPIO55_GPIO | MFP_LPM_DRIVE_HIGH,       /* SYS_RESTART */
 
         /* MMC */
         GPIO32_MMC_CLK,
@@ -144,20 +144,20 @@ static unsigned long ezx_pin_config[] __initdata = {
 #if defined(CONFIG_MACH_EZX_A780) || defined(CONFIG_MACH_EZX_E680)
 static unsigned long gen1_pin_config[] __initdata = {
         /* flip / lockswitch */
-        GPIO12_GPIO,
+        GPIO12_GPIO | WAKEUP_ON_EDGE_BOTH,
 
         /* bluetooth (bcm2035) */
-        GPIO14_GPIO | WAKEUP_ON_LEVEL_HIGH,     /* HOSTWAKE */
+        GPIO14_GPIO | WAKEUP_ON_EDGE_RISE,      /* HOSTWAKE */
         GPIO48_GPIO,                            /* RESET */
         GPIO28_GPIO,                            /* WAKEUP */
 
         /* Neptune handshake */
-        GPIO0_GPIO | WAKEUP_ON_LEVEL_HIGH,      /* BP_RDY */
-        GPIO57_GPIO,                            /* AP_RDY */
-        GPIO13_GPIO | WAKEUP_ON_LEVEL_HIGH,     /* WDI */
-        GPIO3_GPIO | WAKEUP_ON_LEVEL_HIGH,      /* WDI2 */
-        GPIO82_GPIO,                            /* RESET */
-        GPIO99_GPIO,                            /* TC_MM_EN */
+        GPIO0_GPIO | WAKEUP_ON_EDGE_FALL,       /* BP_RDY */
+        GPIO57_GPIO | MFP_LPM_DRIVE_HIGH,       /* AP_RDY */
+        GPIO13_GPIO | WAKEUP_ON_EDGE_BOTH,      /* WDI */
+        GPIO3_GPIO | WAKEUP_ON_EDGE_BOTH,       /* WDI2 */
+        GPIO82_GPIO | MFP_LPM_DRIVE_HIGH,       /* RESET */
+        GPIO99_GPIO | MFP_LPM_DRIVE_HIGH,       /* TC_MM_EN */
 
         /* sound */
         GPIO52_SSP3_SCLK,
@@ -199,21 +199,21 @@ static unsigned long gen1_pin_config[] __initdata = {
         defined(CONFIG_MACH_EZX_E2) || defined(CONFIG_MACH_EZX_E6)
 static unsigned long gen2_pin_config[] __initdata = {
         /* flip / lockswitch */
-        GPIO15_GPIO,
+        GPIO15_GPIO | WAKEUP_ON_EDGE_BOTH,
 
         /* EOC */
-        GPIO10_GPIO,
+        GPIO10_GPIO | WAKEUP_ON_EDGE_RISE,
 
         /* bluetooth (bcm2045) */
-        GPIO13_GPIO | WAKEUP_ON_LEVEL_HIGH,     /* HOSTWAKE */
+        GPIO13_GPIO | WAKEUP_ON_EDGE_RISE,      /* HOSTWAKE */
         GPIO37_GPIO,                            /* RESET */
         GPIO57_GPIO,                            /* WAKEUP */
 
         /* Neptune handshake */
-        GPIO0_GPIO | WAKEUP_ON_LEVEL_HIGH,      /* BP_RDY */
-        GPIO96_GPIO,                            /* AP_RDY */
-        GPIO3_GPIO | WAKEUP_ON_LEVEL_HIGH,      /* WDI */
-        GPIO116_GPIO,                           /* RESET */
+        GPIO0_GPIO | WAKEUP_ON_EDGE_FALL,       /* BP_RDY */
+        GPIO96_GPIO | MFP_LPM_DRIVE_HIGH,       /* AP_RDY */
+        GPIO3_GPIO | WAKEUP_ON_EDGE_FALL,       /* WDI */
+        GPIO116_GPIO | MFP_LPM_DRIVE_HIGH,      /* RESET */
         GPIO41_GPIO,                            /* BP_FLASH */
 
         /* sound */
diff --git a/arch/arm/mach-pxa/imote2.c b/arch/arm/mach-pxa/imote2.c
index 2121309b2474..2b27336c29f1 100644
--- a/arch/arm/mach-pxa/imote2.c
+++ b/arch/arm/mach-pxa/imote2.c
@@ -412,7 +412,7 @@ static struct platform_device imote2_flash_device = {
  */
 static struct i2c_board_info __initdata imote2_i2c_board_info[] = {
         { /* UCAM sensor board */
-                .type = "max1238",
+                .type = "max1239",
                 .addr = 0x35,
         }, { /* ITS400 Sensor board only */
                 .type = "max1363",
diff --git a/arch/arm/mach-pxa/include/mach/reset.h b/arch/arm/mach-pxa/include/mach/reset.h
index 31e6a7b6ad80..b6c10556fbc7 100644
--- a/arch/arm/mach-pxa/include/mach/reset.h
+++ b/arch/arm/mach-pxa/include/mach/reset.h
@@ -13,8 +13,9 @@ extern void clear_reset_status(unsigned int mask);
 /**
  * init_gpio_reset() - register GPIO as reset generator
  * @gpio: gpio nr
- * @output: set gpio as out/low instead of input during normal work
+ * @output: set gpio as output instead of input during normal work
+ * @level: output level
  */
-extern int init_gpio_reset(int gpio, int output);
+extern int init_gpio_reset(int gpio, int output, int level);
 
 #endif /* __ASM_ARCH_RESET_H */
diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c
index e13f6a81c223..c872b9feb4d4 100644
--- a/arch/arm/mach-pxa/littleton.c
+++ b/arch/arm/mach-pxa/littleton.c
@@ -334,6 +334,11 @@ static struct led_info littleton_da9034_leds[] = {
         },
 };
 
+static struct da9034_touch_pdata littleton_da9034_touch = {
+        .x_inverted     = 1,
+        .interval_ms    = 20,
+};
+
 static struct da903x_subdev_info littleton_da9034_subdevs[] = {
         {
                 .name           = "da903x-led",
@@ -350,6 +355,10 @@ static struct da903x_subdev_info littleton_da9034_subdevs[] = {
         }, {
                 .name           = "da903x-backlight",
                 .id             = DA9034_ID_WLED,
+        }, {
+                .name           = "da9034-touch",
+                .id             = DA9034_ID_TOUCH,
+                .platform_data  = &littleton_da9034_touch,
         },
 };
 
diff --git a/arch/arm/mach-pxa/mfp-pxa2xx.c b/arch/arm/mach-pxa/mfp-pxa2xx.c
index 7ffb91d64c39..cf6b720c055f 100644
--- a/arch/arm/mach-pxa/mfp-pxa2xx.c
+++ b/arch/arm/mach-pxa/mfp-pxa2xx.c
@@ -322,6 +322,7 @@ static inline void pxa27x_mfp_init(void) {}
 #ifdef CONFIG_PM
 static unsigned long saved_gafr[2][4];
 static unsigned long saved_gpdr[4];
+static unsigned long saved_pgsr[4];
 
 static int pxa2xx_mfp_suspend(struct sys_device *d, pm_message_t state)
 {
@@ -332,6 +333,7 @@ static int pxa2xx_mfp_suspend(struct sys_device *d, pm_message_t state)
                 saved_gafr[0][i] = GAFR_L(i);
                 saved_gafr[1][i] = GAFR_U(i);
                 saved_gpdr[i] = GPDR(i * 32);
+                saved_pgsr[i] = PGSR(i);
 
                 GPDR(i * 32) = gpdr_lpm[i];
         }
@@ -346,6 +348,7 @@ static int pxa2xx_mfp_resume(struct sys_device *d)
                 GAFR_L(i) = saved_gafr[0][i];
                 GAFR_U(i) = saved_gafr[1][i];
                 GPDR(i * 32) = saved_gpdr[i];
+                PGSR(i) = saved_pgsr[i];
         }
         PSSR = PSSR_RDH | PSSR_PH;
         return 0;
@@ -374,6 +377,9 @@ static int __init pxa2xx_mfp_init(void)
         if (cpu_is_pxa27x())
                 pxa27x_mfp_init();
 
+        /* clear RDH bit to enable GPIO receivers after reset/sleep exit */
+        PSSR = PSSR_RDH;
+
         /* initialize gafr_run[], pgsr_lpm[] from existing values */
         for (i = 0; i <= gpio_to_bank(pxa_last_gpio); i++)
                 gpdr_lpm[i] = GPDR(i * 32);
diff --git a/arch/arm/mach-pxa/palmld.c b/arch/arm/mach-pxa/palmld.c
index 1cec1806f002..471a853e548b 100644
--- a/arch/arm/mach-pxa/palmld.c
+++ b/arch/arm/mach-pxa/palmld.c
@@ -62,6 +62,8 @@ static unsigned long palmld_pin_config[] __initdata = {
         GPIO29_AC97_SDATA_IN_0,
         GPIO30_AC97_SDATA_OUT,
         GPIO31_AC97_SYNC,
+        GPIO89_AC97_SYSCLK,
+        GPIO95_AC97_nRESET,
 
         /* IrDA */
         GPIO108_GPIO,   /* ir disable */
diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c
index 30662363907b..05bf979b78a6 100644
--- a/arch/arm/mach-pxa/palmt5.c
+++ b/arch/arm/mach-pxa/palmt5.c
@@ -64,6 +64,7 @@ static unsigned long palmt5_pin_config[] __initdata = {
         GPIO29_AC97_SDATA_IN_0,
         GPIO30_AC97_SDATA_OUT,
         GPIO31_AC97_SYNC,
+        GPIO89_AC97_SYSCLK,
         GPIO95_AC97_nRESET,
 
         /* IrDA */
diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c
index e2d44b1a8a9b..e99a893c58a7 100644
--- a/arch/arm/mach-pxa/palmtx.c
+++ b/arch/arm/mach-pxa/palmtx.c
@@ -65,6 +65,7 @@ static unsigned long palmtx_pin_config[] __initdata = {
         GPIO29_AC97_SDATA_IN_0,
         GPIO30_AC97_SDATA_OUT,
         GPIO31_AC97_SYNC,
+        GPIO89_AC97_SYSCLK,
         GPIO95_AC97_nRESET,
 
         /* IrDA */
diff --git a/arch/arm/mach-pxa/reset.c b/arch/arm/mach-pxa/reset.c
index df29d45fb4e7..01e9d643394a 100644
--- a/arch/arm/mach-pxa/reset.c
+++ b/arch/arm/mach-pxa/reset.c
@@ -20,7 +20,7 @@ static void do_hw_reset(void);
 
 static int reset_gpio = -1;
 
-int init_gpio_reset(int gpio, int output)
+int init_gpio_reset(int gpio, int output, int level)
 {
         int rc;
 
@@ -31,7 +31,7 @@ int init_gpio_reset(int gpio, int output)
         }
 
         if (output)
-                rc = gpio_direction_output(gpio, 0);
+                rc = gpio_direction_output(gpio, level);
         else
                 rc = gpio_direction_input(gpio);
         if (rc) {
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index 8c61ddac119e..5a45fe340a10 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -299,12 +299,22 @@ static struct pxa2xx_spi_master spitz_spi_info = {
         .num_chipselect = 3,
 };
 
+static void spitz_wait_for_hsync(void)
+{
+        while (gpio_get_value(SPITZ_GPIO_HSYNC))
+                cpu_relax();
+
+        while (!gpio_get_value(SPITZ_GPIO_HSYNC))
+                cpu_relax();
+}
+
 static struct ads7846_platform_data spitz_ads7846_info = {
         .model                  = 7846,
         .vref_delay_usecs       = 100,
         .x_plate_ohms           = 419,
         .y_plate_ohms           = 486,
         .gpio_pendown           = SPITZ_GPIO_TP_INT,
+        .wait_for_sync          = spitz_wait_for_hsync,
 };
 
 static void spitz_ads7846_cs(u32 command)
@@ -521,9 +531,15 @@ static int spitz_ohci_init(struct device *dev)
         return gpio_direction_output(SPITZ_GPIO_USB_HOST, 1);
 }
 
+static void spitz_ohci_exit(struct device *dev)
+{
+        gpio_free(SPITZ_GPIO_USB_HOST);
+}
+
 static struct pxaohci_platform_data spitz_ohci_platform_data = {
         .port_mode      = PMM_NPS_MODE,
         .init           = spitz_ohci_init,
+        .exit           = spitz_ohci_exit,
         .flags          = ENABLE_PORT_ALL | NO_OC_PROTECTION,
         .power_budget   = 150,
 };
@@ -721,7 +737,7 @@ static void spitz_restart(char mode, const char *cmd)
 
 static void __init common_init(void)
 {
-        init_gpio_reset(SPITZ_GPIO_ON_RESET, 1);
+        init_gpio_reset(SPITZ_GPIO_ON_RESET, 1, 0);
         pm_power_off = spitz_poweroff;
         arm_pm_restart = spitz_restart;
 
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index afac5b6d3d78..a0bd46ef5d30 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -897,7 +897,7 @@ static void __init tosa_init(void)
         gpio_set_wake(MFP_PIN_GPIO1, 1);
         /* We can't pass to gpio-keys since it will drop the Reset altfunc */
 
-        init_gpio_reset(TOSA_GPIO_ON_RESET, 0);
+        init_gpio_reset(TOSA_GPIO_ON_RESET, 0, 0);
 
         pm_power_off = tosa_poweroff;
         arm_pm_restart = tosa_restart;
diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c
index 0e65344e9f53..dd031cc41847 100644
--- a/arch/arm/mach-pxa/viper.c
+++ b/arch/arm/mach-pxa/viper.c
@@ -46,6 +46,7 @@
 #include <mach/audio.h>
 #include <mach/pxafb.h>
 #include <mach/i2c.h>
+#include <mach/regs-uart.h>
 #include <mach/viper.h>
 
 #include <asm/setup.h>
diff --git a/arch/arm/mach-pxa/zylonite_pxa300.c b/arch/arm/mach-pxa/zylonite_pxa300.c
index c1f73205d078..c256c57642c0 100644
--- a/arch/arm/mach-pxa/zylonite_pxa300.c
+++ b/arch/arm/mach-pxa/zylonite_pxa300.c
@@ -72,6 +72,7 @@ static mfp_cfg_t common_mfp_cfg[] __initdata = {
         GPIO25_AC97_SDATA_IN_0,
         GPIO27_AC97_SDATA_OUT,
         GPIO28_AC97_SYNC,
+        GPIO17_GPIO,    /* SDATA_IN_1 but unused - configure to GPIO */
 
         /* SSP3 */
         GPIO91_SSP3_SCLK,
@@ -126,6 +127,10 @@ static mfp_cfg_t common_mfp_cfg[] __initdata = {
         /* Standard I2C */
         GPIO21_I2C_SCL,
         GPIO22_I2C_SDA,
+
+        /* GPIO */
+        GPIO18_GPIO,    /* GPIO Expander #0 INT_N */
+        GPIO19_GPIO,    /* GPIO Expander #1 INT_N */
 };
 
 static mfp_cfg_t pxa300_mfp_cfg[] __initdata = {
diff --git a/arch/arm/mach-pxa/zylonite_pxa320.c b/arch/arm/mach-pxa/zylonite_pxa320.c
index 4e1c488c6906..cc5a22833605 100644
--- a/arch/arm/mach-pxa/zylonite_pxa320.c
+++ b/arch/arm/mach-pxa/zylonite_pxa320.c
@@ -68,6 +68,7 @@ static mfp_cfg_t mfp_cfg[] __initdata = {
         GPIO38_AC97_SYNC,
         GPIO39_AC97_BITCLK,
         GPIO40_AC97_nACRESET,
+        GPIO36_GPIO,    /* SDATA_IN_1 but unused - configure to GPIO */
 
         /* SSP3 */
         GPIO89_SSP3_SCLK,