aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-pxa/viper.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-pxa/viper.c')
-rw-r--r--arch/arm/mach-pxa/viper.c951
1 files changed, 951 insertions, 0 deletions
diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c
new file mode 100644
index 000000000000..d7632f63603c
--- /dev/null
+++ b/arch/arm/mach-pxa/viper.c
@@ -0,0 +1,951 @@
1/*
2 * linux/arch/arm/mach-pxa/viper.c
3 *
4 * Support for the Arcom VIPER SBC.
5 *
6 * Author: Ian Campbell
7 * Created: Feb 03, 2003
8 * Copyright: Arcom Control Systems
9 *
10 * Maintained by Marc Zyngier <maz@misterjones.org>
11 * <marc.zyngier@altran.com>
12 *
13 * Based on lubbock.c:
14 * Author: Nicolas Pitre
15 * Created: Jun 15, 2001
16 * Copyright: MontaVista Software Inc.
17 *
18 * This program is free software; you can redistribute it and/or modify
19 * it under the terms of the GNU General Public License version 2 as
20 * published by the Free Software Foundation.
21 */
22
23#include <linux/types.h>
24#include <linux/memory.h>
25#include <linux/cpu.h>
26#include <linux/cpufreq.h>
27#include <linux/delay.h>
28#include <linux/fs.h>
29#include <linux/init.h>
30#include <linux/interrupt.h>
31#include <linux/major.h>
32#include <linux/module.h>
33#include <linux/pm.h>
34#include <linux/sched.h>
35#include <linux/gpio.h>
36#include <linux/i2c-gpio.h>
37#include <linux/serial_8250.h>
38#include <linux/smc91x.h>
39#include <linux/pwm_backlight.h>
40#include <linux/usb/isp116x.h>
41#include <linux/mtd/mtd.h>
42#include <linux/mtd/partitions.h>
43#include <linux/mtd/physmap.h>
44
45#include <mach/pxa-regs.h>
46#include <mach/pxa2xx-regs.h>
47#include <mach/bitfield.h>
48#include <mach/audio.h>
49#include <mach/pxafb.h>
50#include <mach/mfp-pxa25x.h>
51#include <mach/i2c.h>
52#include <mach/viper.h>
53
54#include <asm/setup.h>
55#include <asm/mach-types.h>
56#include <asm/irq.h>
57#include <asm/sizes.h>
58
59#include <asm/mach/arch.h>
60#include <asm/mach/map.h>
61#include <asm/mach/irq.h>
62
63#include "generic.h"
64#include "devices.h"
65
66static unsigned int icr;
67
68static void viper_icr_set_bit(unsigned int bit)
69{
70 icr |= bit;
71 VIPER_ICR = icr;
72}
73
74static void viper_icr_clear_bit(unsigned int bit)
75{
76 icr &= ~bit;
77 VIPER_ICR = icr;
78}
79
80/* This function is used from the pcmcia module to reset the CF */
81void viper_cf_rst(int state)
82{
83 if (state)
84 viper_icr_set_bit(VIPER_ICR_CF_RST);
85 else
86 viper_icr_clear_bit(VIPER_ICR_CF_RST);
87}
88EXPORT_SYMBOL(viper_cf_rst);
89
90/*
91 * The CPLD version register was not present on VIPER boards prior to
92 * v2i1. On v1 boards where the version register is not present we
93 * will just read back the previous value from the databus.
94 *
95 * Therefore we do two reads. The first time we write 0 to the
96 * (read-only) register before reading and the second time we write
97 * 0xff first. If the two reads do not match or they read back as 0xff
98 * or 0x00 then we have version 1 hardware.
99 */
100static u8 viper_hw_version(void)
101{
102 u8 v1, v2;
103 unsigned long flags;
104
105 local_irq_save(flags);
106
107 VIPER_VERSION = 0;
108 v1 = VIPER_VERSION;
109 VIPER_VERSION = 0xff;
110 v2 = VIPER_VERSION;
111
112 v1 = (v1 != v2 || v1 == 0xff) ? 0 : v1;
113
114 local_irq_restore(flags);
115 return v1;
116}
117
118/* CPU sysdev */
119static int viper_cpu_suspend(struct sys_device *sysdev, pm_message_t state)
120{
121 viper_icr_set_bit(VIPER_ICR_R_DIS);
122 return 0;
123}
124
125static int viper_cpu_resume(struct sys_device *sysdev)
126{
127 viper_icr_clear_bit(VIPER_ICR_R_DIS);
128 return 0;
129}
130
131static struct sysdev_driver viper_cpu_sysdev_driver = {
132 .suspend = viper_cpu_suspend,
133 .resume = viper_cpu_resume,
134};
135
136static unsigned int current_voltage_divisor;
137
138/*
139 * If force is not true then step from existing to new divisor. If
140 * force is true then jump straight to the new divisor. Stepping is
141 * used because if the jump in voltage is too large, the VCC can dip
142 * too low and the regulator cuts out.
143 *
144 * force can be used to initialize the divisor to a know state by
145 * setting the value for the current clock speed, since we are already
146 * running at that speed we know the voltage should be pretty close so
147 * the jump won't be too large
148 */
149static void viper_set_core_cpu_voltage(unsigned long khz, int force)
150{
151 int i = 0;
152 unsigned int divisor = 0;
153 const char *v;
154
155 if (khz < 200000) {
156 v = "1.0"; divisor = 0xfff;
157 } else if (khz < 300000) {
158 v = "1.1"; divisor = 0xde5;
159 } else {
160 v = "1.3"; divisor = 0x325;
161 }
162
163 pr_debug("viper: setting CPU core voltage to %sV at %d.%03dMHz\n",
164 v, (int)khz / 1000, (int)khz % 1000);
165
166#define STEP 0x100
167 do {
168 int step;
169
170 if (force)
171 step = divisor;
172 else if (current_voltage_divisor < divisor - STEP)
173 step = current_voltage_divisor + STEP;
174 else if (current_voltage_divisor > divisor + STEP)
175 step = current_voltage_divisor - STEP;
176 else
177 step = divisor;
178 force = 0;
179
180 gpio_set_value(VIPER_PSU_CLK_GPIO, 0);
181 gpio_set_value(VIPER_PSU_nCS_LD_GPIO, 0);
182
183 for (i = 1 << 11 ; i > 0 ; i >>= 1) {
184 udelay(1);
185
186 gpio_set_value(VIPER_PSU_DATA_GPIO, step & i);
187 udelay(1);
188
189 gpio_set_value(VIPER_PSU_CLK_GPIO, 1);
190 udelay(1);
191
192 gpio_set_value(VIPER_PSU_CLK_GPIO, 0);
193 }
194 udelay(1);
195
196 gpio_set_value(VIPER_PSU_nCS_LD_GPIO, 1);
197 udelay(1);
198
199 gpio_set_value(VIPER_PSU_nCS_LD_GPIO, 0);
200
201 current_voltage_divisor = step;
202 } while (current_voltage_divisor != divisor);
203}
204
205/* Interrupt handling */
206static unsigned long viper_irq_enabled_mask;
207
208static void viper_ack_irq(unsigned int irq)
209{
210 int viper_irq = irq - PXA_ISA_IRQ(0);
211
212 if (viper_irq < 8)
213 VIPER_LO_IRQ_STATUS = 1 << viper_irq;
214 else
215 VIPER_HI_IRQ_STATUS = 1 << (viper_irq - 8);
216}
217
218static void viper_mask_irq(unsigned int irq)
219{
220 viper_irq_enabled_mask &= ~(1 << (irq - PXA_ISA_IRQ(0)));
221}
222
223static void viper_unmask_irq(unsigned int irq)
224{
225 viper_irq_enabled_mask |= (1 << (irq - PXA_ISA_IRQ(0)));
226}
227
228static inline unsigned long viper_irq_pending(void)
229{
230 return (VIPER_HI_IRQ_STATUS << 8 | VIPER_LO_IRQ_STATUS) &
231 viper_irq_enabled_mask;
232}
233
234static void viper_irq_handler(unsigned int irq, struct irq_desc *desc)
235{
236 unsigned long pending;
237
238 pending = viper_irq_pending();
239 do {
240 if (likely(pending)) {
241 irq = PXA_ISA_IRQ(0) + __ffs(pending);
242 generic_handle_irq(irq);
243 }
244 pending = viper_irq_pending();
245 } while (pending);
246}
247
248static struct irq_chip viper_irq_chip = {
249 .name = "ISA",
250 .ack = viper_ack_irq,
251 .mask = viper_mask_irq,
252 .unmask = viper_unmask_irq
253};
254
255static void __init viper_init_irq(void)
256{
257 const int isa_irqs[] = { 3, 4, 5, 6, 7, 10, 11, 12, 9, 14, 15 };
258 int irq;
259 int isa_irq;
260
261 pxa25x_init_irq();
262
263 /* setup ISA IRQs */
264 for (irq = 0; irq < ARRAY_SIZE(isa_irqs); irq++) {
265 isa_irq = isa_irqs[irq];
266 set_irq_chip(isa_irq, &viper_irq_chip);
267 set_irq_handler(isa_irq, handle_edge_irq);
268 set_irq_flags(isa_irq, IRQF_VALID | IRQF_PROBE);
269 }
270
271 set_irq_chained_handler(gpio_to_irq(VIPER_CPLD_GPIO),
272 viper_irq_handler);
273 set_irq_type(gpio_to_irq(VIPER_CPLD_GPIO), IRQ_TYPE_EDGE_BOTH);
274
275#ifndef CONFIG_SERIAL_PXA
276 /*
277 * 8250 doesn't support IRQ_TYPE being passed as part
278 * of the plat_serial8250_port structure...
279 */
280 set_irq_type(gpio_to_irq(VIPER_UARTA_GPIO), IRQ_TYPE_EDGE_RISING);
281 set_irq_type(gpio_to_irq(VIPER_UARTB_GPIO), IRQ_TYPE_EDGE_RISING);
282#endif
283}
284
285/* Flat Panel */
286static struct pxafb_mode_info fb_mode_info[] = {
287 {
288 .pixclock = 157500,
289
290 .xres = 320,
291 .yres = 240,
292
293 .bpp = 16,
294
295 .hsync_len = 63,
296 .left_margin = 7,
297 .right_margin = 13,
298
299 .vsync_len = 20,
300 .upper_margin = 0,
301 .lower_margin = 0,
302
303 .sync = 0,
304 },
305};
306
307static struct pxafb_mach_info fb_info = {
308 .modes = fb_mode_info,
309 .num_modes = 1,
310 .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
311};
312
313static int viper_backlight_init(struct device *dev)
314{
315 int ret;
316
317 /* GPIO9 and 10 control FB backlight. Initialise to off */
318 ret = gpio_request(VIPER_BCKLIGHT_EN_GPIO, "Backlight");
319 if (ret)
320 goto err_request_bckl;
321
322 ret = gpio_request(VIPER_LCD_EN_GPIO, "LCD");
323 if (ret)
324 goto err_request_lcd;
325
326 ret = gpio_direction_output(VIPER_BCKLIGHT_EN_GPIO, 0);
327 if (ret)
328 goto err_dir;
329
330 ret = gpio_direction_output(VIPER_LCD_EN_GPIO, 0);
331 if (ret)
332 goto err_dir;
333
334 return 0;
335
336err_dir:
337 gpio_free(VIPER_LCD_EN_GPIO);
338err_request_lcd:
339 gpio_free(VIPER_BCKLIGHT_EN_GPIO);
340err_request_bckl:
341 dev_err(dev, "Failed to setup LCD GPIOs\n");
342
343 return ret;
344}
345
346static int viper_backlight_notify(int brightness)
347{
348 gpio_set_value(VIPER_LCD_EN_GPIO, !!brightness);
349 gpio_set_value(VIPER_BCKLIGHT_EN_GPIO, !!brightness);
350
351 return brightness;
352}
353
354static void viper_backlight_exit(struct device *dev)
355{
356 gpio_free(VIPER_LCD_EN_GPIO);
357 gpio_free(VIPER_BCKLIGHT_EN_GPIO);
358}
359
360static struct platform_pwm_backlight_data viper_backlight_data = {
361 .pwm_id = 0,
362 .max_brightness = 100,
363 .dft_brightness = 100,
364 .pwm_period_ns = 1000000,
365 .init = viper_backlight_init,
366 .notify = viper_backlight_notify,
367 .exit = viper_backlight_exit,
368};
369
370static struct platform_device viper_backlight_device = {
371 .name = "pwm-backlight",
372 .dev = {
373 .parent = &pxa25x_device_pwm0.dev,
374 .platform_data = &viper_backlight_data,
375 },
376};
377
378/* Ethernet */
379static struct resource smc91x_resources[] = {
380 [0] = {
381 .name = "smc91x-regs",
382 .start = VIPER_ETH_PHYS + 0x300,
383 .end = VIPER_ETH_PHYS + 0x30f,
384 .flags = IORESOURCE_MEM,
385 },
386 [1] = {
387 .start = gpio_to_irq(VIPER_ETH_GPIO),
388 .end = gpio_to_irq(VIPER_ETH_GPIO),
389 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
390 },
391 [2] = {
392 .name = "smc91x-data32",
393 .start = VIPER_ETH_DATA_PHYS,
394 .end = VIPER_ETH_DATA_PHYS + 3,
395 .flags = IORESOURCE_MEM,
396 },
397};
398
399static struct smc91x_platdata viper_smc91x_info = {
400 .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
401 .leda = RPC_LED_100_10,
402 .ledb = RPC_LED_TX_RX,
403};
404
405static struct platform_device smc91x_device = {
406 .name = "smc91x",
407 .id = -1,
408 .num_resources = ARRAY_SIZE(smc91x_resources),
409 .resource = smc91x_resources,
410 .dev = {
411 .platform_data = &viper_smc91x_info,
412 },
413};
414
415/* i2c */
416static struct i2c_gpio_platform_data i2c_bus_data = {
417 .sda_pin = VIPER_RTC_I2C_SDA_GPIO,
418 .scl_pin = VIPER_RTC_I2C_SCL_GPIO,
419 .udelay = 10,
420 .timeout = 100,
421};
422
423static struct platform_device i2c_bus_device = {
424 .name = "i2c-gpio",
425 .id = 1, /* pxa2xx-i2c is bus 0, so start at 1 */
426 .dev = {
427 .platform_data = &i2c_bus_data,
428 }
429};
430
431static struct i2c_board_info __initdata viper_i2c_devices[] = {
432 {
433 I2C_BOARD_INFO("ds1338", 0x68),
434 },
435};
436
437/*
438 * Serial configuration:
439 * You can either have the standard PXA ports driven by the PXA driver,
440 * or all the ports (PXA + 16850) driven by the 8250 driver.
441 * Choose your poison.
442 */
443
444static struct resource viper_serial_resources[] = {
445#ifndef CONFIG_SERIAL_PXA
446 {
447 .start = 0x40100000,
448 .end = 0x4010001f,
449 .flags = IORESOURCE_MEM,
450 },
451 {
452 .start = 0x40200000,
453 .end = 0x4020001f,
454 .flags = IORESOURCE_MEM,
455 },
456 {
457 .start = 0x40700000,
458 .end = 0x4070001f,
459 .flags = IORESOURCE_MEM,
460 },
461 {
462 .start = VIPER_UARTA_PHYS,
463 .end = VIPER_UARTA_PHYS + 0xf,
464 .flags = IORESOURCE_MEM,
465 },
466 {
467 .start = VIPER_UARTB_PHYS,
468 .end = VIPER_UARTB_PHYS + 0xf,
469 .flags = IORESOURCE_MEM,
470 },
471#else
472 {
473 0,
474 },
475#endif
476};
477
478static struct plat_serial8250_port serial_platform_data[] = {
479#ifndef CONFIG_SERIAL_PXA
480 /* Internal UARTs */
481 {
482 .membase = (void *)&FFUART,
483 .mapbase = __PREG(FFUART),
484 .irq = IRQ_FFUART,
485 .uartclk = 921600 * 16,
486 .regshift = 2,
487 .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
488 .iotype = UPIO_MEM,
489 },
490 {
491 .membase = (void *)&BTUART,
492 .mapbase = __PREG(BTUART),
493 .irq = IRQ_BTUART,
494 .uartclk = 921600 * 16,
495 .regshift = 2,
496 .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
497 .iotype = UPIO_MEM,
498 },
499 {
500 .membase = (void *)&STUART,
501 .mapbase = __PREG(STUART),
502 .irq = IRQ_STUART,
503 .uartclk = 921600 * 16,
504 .regshift = 2,
505 .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
506 .iotype = UPIO_MEM,
507 },
508 /* External UARTs */
509 {
510 .mapbase = VIPER_UARTA_PHYS,
511 .irq = gpio_to_irq(VIPER_UARTA_GPIO),
512 .uartclk = 1843200,
513 .regshift = 1,
514 .iotype = UPIO_MEM,
515 .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP |
516 UPF_SKIP_TEST,
517 },
518 {
519 .mapbase = VIPER_UARTB_PHYS,
520 .irq = gpio_to_irq(VIPER_UARTB_GPIO),
521 .uartclk = 1843200,
522 .regshift = 1,
523 .iotype = UPIO_MEM,
524 .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP |
525 UPF_SKIP_TEST,
526 },
527#endif
528 { },
529};
530
531static struct platform_device serial_device = {
532 .name = "serial8250",
533 .id = 0,
534 .dev = {
535 .platform_data = serial_platform_data,
536 },
537 .num_resources = ARRAY_SIZE(viper_serial_resources),
538 .resource = viper_serial_resources,
539};
540
541/* USB */
542static void isp116x_delay(struct device *dev, int delay)
543{
544 ndelay(delay);
545}
546
547static struct resource isp116x_resources[] = {
548 [0] = { /* DATA */
549 .start = VIPER_USB_PHYS + 0,
550 .end = VIPER_USB_PHYS + 1,
551 .flags = IORESOURCE_MEM,
552 },
553 [1] = { /* ADDR */
554 .start = VIPER_USB_PHYS + 2,
555 .end = VIPER_USB_PHYS + 3,
556 .flags = IORESOURCE_MEM,
557 },
558 [2] = {
559 .start = gpio_to_irq(VIPER_USB_GPIO),
560 .end = gpio_to_irq(VIPER_USB_GPIO),
561 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
562 },
563};
564
565/* (DataBusWidth16|AnalogOCEnable|DREQOutputPolarity|DownstreamPort15KRSel ) */
566static struct isp116x_platform_data isp116x_platform_data = {
567 /* Enable internal resistors on downstream ports */
568 .sel15Kres = 1,
569 /* On-chip overcurrent protection */
570 .oc_enable = 1,
571 /* INT output polarity */
572 .int_act_high = 1,
573 /* INT edge or level triggered */
574 .int_edge_triggered = 0,
575
576 /* WAKEUP pin connected - NOT SUPPORTED */
577 /* .remote_wakeup_connected = 0, */
578 /* Wakeup by devices on usb bus enabled */
579 .remote_wakeup_enable = 0,
580 .delay = isp116x_delay,
581};
582
583static struct platform_device isp116x_device = {
584 .name = "isp116x-hcd",
585 .id = -1,
586 .num_resources = ARRAY_SIZE(isp116x_resources),
587 .resource = isp116x_resources,
588 .dev = {
589 .platform_data = &isp116x_platform_data,
590 },
591
592};
593
594/* MTD */
595static struct resource mtd_resources[] = {
596 [0] = { /* RedBoot config + filesystem flash */
597 .start = VIPER_FLASH_PHYS,
598 .end = VIPER_FLASH_PHYS + SZ_32M - 1,
599 .flags = IORESOURCE_MEM,
600 },
601 [1] = { /* Boot flash */
602 .start = VIPER_BOOT_PHYS,
603 .end = VIPER_BOOT_PHYS + SZ_1M - 1,
604 .flags = IORESOURCE_MEM,
605 },
606 [2] = { /*
607 * SRAM size is actually 256KB, 8bits, with a sparse mapping
608 * (each byte is on a 16bit boundary).
609 */
610 .start = _VIPER_SRAM_BASE,
611 .end = _VIPER_SRAM_BASE + SZ_512K - 1,
612 .flags = IORESOURCE_MEM,
613 },
614};
615
616static struct mtd_partition viper_boot_flash_partition = {
617 .name = "RedBoot",
618 .size = SZ_1M,
619 .offset = 0,
620 .mask_flags = MTD_WRITEABLE, /* force R/O */
621};
622
623static struct physmap_flash_data viper_flash_data[] = {
624 [0] = {
625 .width = 2,
626 .parts = NULL,
627 .nr_parts = 0,
628 },
629 [1] = {
630 .width = 2,
631 .parts = &viper_boot_flash_partition,
632 .nr_parts = 1,
633 },
634};
635
636static struct platform_device viper_mtd_devices[] = {
637 [0] = {
638 .name = "physmap-flash",
639 .id = 0,
640 .dev = {
641 .platform_data = &viper_flash_data[0],
642 },
643 .resource = &mtd_resources[0],
644 .num_resources = 1,
645 },
646 [1] = {
647 .name = "physmap-flash",
648 .id = 1,
649 .dev = {
650 .platform_data = &viper_flash_data[1],
651 },
652 .resource = &mtd_resources[1],
653 .num_resources = 1,
654 },
655};
656
657static struct platform_device *viper_devs[] __initdata = {
658 &smc91x_device,
659 &i2c_bus_device,
660 &serial_device,
661 &isp116x_device,
662 &viper_mtd_devices[0],
663 &viper_mtd_devices[1],
664 &viper_backlight_device,
665};
666
667static mfp_cfg_t viper_pin_config[] __initdata = {
668 /* Chip selects */
669 GPIO15_nCS_1,
670 GPIO78_nCS_2,
671 GPIO79_nCS_3,
672 GPIO80_nCS_4,
673 GPIO33_nCS_5,
674
675 /* FP Backlight */
676 GPIO9_GPIO, /* VIPER_BCKLIGHT_EN_GPIO */
677 GPIO10_GPIO, /* VIPER_LCD_EN_GPIO */
678 GPIO16_PWM0_OUT,
679
680 /* Ethernet PHY Ready */
681 GPIO18_RDY,
682
683 /* Serial shutdown */
684 GPIO12_GPIO | MFP_LPM_DRIVE_HIGH, /* VIPER_UART_SHDN_GPIO */
685
686 /* Compact-Flash / PC104 */
687 GPIO48_nPOE,
688 GPIO49_nPWE,
689 GPIO50_nPIOR,
690 GPIO51_nPIOW,
691 GPIO52_nPCE_1,
692 GPIO53_nPCE_2,
693 GPIO54_nPSKTSEL,
694 GPIO55_nPREG,
695 GPIO56_nPWAIT,
696 GPIO57_nIOIS16,
697 GPIO8_GPIO, /* VIPER_CF_RDY_GPIO */
698 GPIO32_GPIO, /* VIPER_CF_CD_GPIO */
699 GPIO82_GPIO, /* VIPER_CF_POWER_GPIO */
700
701 /* Integrated UPS control */
702 GPIO20_GPIO, /* VIPER_UPS_GPIO */
703
704 /* Vcc regulator control */
705 GPIO6_GPIO, /* VIPER_PSU_DATA_GPIO */
706 GPIO11_GPIO, /* VIPER_PSU_CLK_GPIO */
707 GPIO19_GPIO, /* VIPER_PSU_nCS_LD_GPIO */
708
709 /* i2c busses */
710 GPIO26_GPIO, /* VIPER_TPM_I2C_SDA_GPIO */
711 GPIO27_GPIO, /* VIPER_TPM_I2C_SCL_GPIO */
712 GPIO83_GPIO, /* VIPER_RTC_I2C_SDA_GPIO */
713 GPIO84_GPIO, /* VIPER_RTC_I2C_SCL_GPIO */
714
715 /* PC/104 Interrupt */
716 GPIO1_GPIO | WAKEUP_ON_EDGE_RISE, /* VIPER_CPLD_GPIO */
717};
718
719static unsigned long viper_tpm;
720
721static int __init viper_tpm_setup(char *str)
722{
723 strict_strtoul(str, 10, &viper_tpm);
724 return 1;
725}
726
727__setup("tpm=", viper_tpm_setup);
728
729static void __init viper_tpm_init(void)
730{
731 struct platform_device *tpm_device;
732 struct i2c_gpio_platform_data i2c_tpm_data = {
733 .sda_pin = VIPER_TPM_I2C_SDA_GPIO,
734 .scl_pin = VIPER_TPM_I2C_SCL_GPIO,
735 .udelay = 10,
736 .timeout = 100,
737 };
738 char *errstr;
739
740 /* Allocate TPM i2c bus if requested */
741 if (!viper_tpm)
742 return;
743
744 tpm_device = platform_device_alloc("i2c-gpio", 2);
745 if (tpm_device) {
746 if (!platform_device_add_data(tpm_device,
747 &i2c_tpm_data,
748 sizeof(i2c_tpm_data))) {
749 if (platform_device_add(tpm_device)) {
750 errstr = "register TPM i2c bus";
751 goto error_free_tpm;
752 }
753 } else {
754 errstr = "allocate TPM i2c bus data";
755 goto error_free_tpm;
756 }
757 } else {
758 errstr = "allocate TPM i2c device";
759 goto error_tpm;
760 }
761
762 return;
763
764error_free_tpm:
765 kfree(tpm_device);
766error_tpm:
767 pr_err("viper: Couldn't %s, giving up\n", errstr);
768}
769
770static void __init viper_init_vcore_gpios(void)
771{
772 if (gpio_request(VIPER_PSU_DATA_GPIO, "PSU data"))
773 goto err_request_data;
774
775 if (gpio_request(VIPER_PSU_CLK_GPIO, "PSU clock"))
776 goto err_request_clk;
777
778 if (gpio_request(VIPER_PSU_nCS_LD_GPIO, "PSU cs"))
779 goto err_request_cs;
780
781 if (gpio_direction_output(VIPER_PSU_DATA_GPIO, 0) ||
782 gpio_direction_output(VIPER_PSU_CLK_GPIO, 0) ||
783 gpio_direction_output(VIPER_PSU_nCS_LD_GPIO, 0))
784 goto err_dir;
785
786 /* c/should assume redboot set the correct level ??? */
787 viper_set_core_cpu_voltage(get_clk_frequency_khz(0), 1);
788
789 return;
790
791err_dir:
792 gpio_free(VIPER_PSU_nCS_LD_GPIO);
793err_request_cs:
794 gpio_free(VIPER_PSU_CLK_GPIO);
795err_request_clk:
796 gpio_free(VIPER_PSU_DATA_GPIO);
797err_request_data:
798 pr_err("viper: Failed to setup vcore control GPIOs\n");
799}
800
801static void __init viper_init_serial_gpio(void)
802{
803 if (gpio_request(VIPER_UART_SHDN_GPIO, "UARTs shutdown"))
804 goto err_request;
805
806 if (gpio_direction_output(VIPER_UART_SHDN_GPIO, 0))
807 goto err_dir;
808
809 return;
810
811err_dir:
812 gpio_free(VIPER_UART_SHDN_GPIO);
813err_request:
814 pr_err("viper: Failed to setup UART shutdown GPIO\n");
815}
816
817#ifdef CONFIG_CPU_FREQ
818static int viper_cpufreq_notifier(struct notifier_block *nb,
819 unsigned long val, void *data)
820{
821 struct cpufreq_freqs *freq = data;
822
823 /* TODO: Adjust timings??? */
824
825 switch (val) {
826 case CPUFREQ_PRECHANGE:
827 if (freq->old < freq->new) {
828 /* we are getting faster so raise the voltage
829 * before we change freq */
830 viper_set_core_cpu_voltage(freq->new, 0);
831 }
832 break;
833 case CPUFREQ_POSTCHANGE:
834 if (freq->old > freq->new) {
835 /* we are slowing down so drop the power
836 * after we change freq */
837 viper_set_core_cpu_voltage(freq->new, 0);
838 }
839 break;
840 case CPUFREQ_RESUMECHANGE:
841 viper_set_core_cpu_voltage(freq->new, 0);
842 break;
843 default:
844 /* ignore */
845 break;
846 }
847
848 return 0;
849}
850
851static struct notifier_block viper_cpufreq_notifier_block = {
852 .notifier_call = viper_cpufreq_notifier
853};
854
855static void __init viper_init_cpufreq(void)
856{
857 if (cpufreq_register_notifier(&viper_cpufreq_notifier_block,
858 CPUFREQ_TRANSITION_NOTIFIER))
859 pr_err("viper: Failed to setup cpufreq notifier\n");
860}
861#else
862static inline void viper_init_cpufreq(void) {}
863#endif
864
865static void viper_power_off(void)
866{
867 pr_notice("Shutting off UPS\n");
868 gpio_set_value(VIPER_UPS_GPIO, 1);
869 /* Spin to death... */
870 while (1);
871}
872
873static void __init viper_init(void)
874{
875 u8 version;
876
877 pm_power_off = viper_power_off;
878
879 pxa2xx_mfp_config(ARRAY_AND_SIZE(viper_pin_config));
880
881 /* Wake-up serial console */
882 viper_init_serial_gpio();
883
884 set_pxa_fb_info(&fb_info);
885
886 /* v1 hardware cannot use the datacs line */
887 version = viper_hw_version();
888 if (version == 0)
889 smc91x_device.num_resources--;
890
891 pxa_set_i2c_info(NULL);
892 platform_add_devices(viper_devs, ARRAY_SIZE(viper_devs));
893
894 viper_init_vcore_gpios();
895 viper_init_cpufreq();
896
897 sysdev_driver_register(&cpu_sysdev_class, &viper_cpu_sysdev_driver);
898
899 if (version) {
900 pr_info("viper: hardware v%di%d detected. "
901 "CPLD revision %d.\n",
902 VIPER_BOARD_VERSION(version),
903 VIPER_BOARD_ISSUE(version),
904 VIPER_CPLD_REVISION(version));
905 system_rev = (VIPER_BOARD_VERSION(version) << 8) |
906 (VIPER_BOARD_ISSUE(version) << 4) |
907 VIPER_CPLD_REVISION(version);
908 } else {
909 pr_info("viper: No version register.\n");
910 }
911
912 i2c_register_board_info(1, ARRAY_AND_SIZE(viper_i2c_devices));
913
914 viper_tpm_init();
915 pxa_set_ac97_info(NULL);
916}
917
918static struct map_desc viper_io_desc[] __initdata = {
919 {
920 .virtual = VIPER_CPLD_BASE,
921 .pfn = __phys_to_pfn(VIPER_CPLD_PHYS),
922 .length = 0x00300000,
923 .type = MT_DEVICE,
924 },
925 {
926 .virtual = VIPER_PC104IO_BASE,
927 .pfn = __phys_to_pfn(_PCMCIA1IO),
928 .length = 0x00800000,
929 .type = MT_DEVICE,
930 },
931};
932
933static void __init viper_map_io(void)
934{
935 pxa_map_io();
936
937 iotable_init(viper_io_desc, ARRAY_SIZE(viper_io_desc));
938
939 PCFR |= PCFR_OPDE;
940}
941
942MACHINE_START(VIPER, "Arcom/Eurotech VIPER SBC")
943 /* Maintainer: Marc Zyngier <maz@misterjones.org> */
944 .phys_io = 0x40000000,
945 .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
946 .boot_params = 0xa0000100,
947 .map_io = viper_map_io,
948 .init_irq = viper_init_irq,
949 .timer = &pxa_timer,
950 .init_machine = viper_init,
951MACHINE_END
generated by cgit v1.2.2 (git 2.25.0) at 2024-11-11 07:59:10 -0500