1 files changed, 280 insertions, 257 deletions

diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index b569f3b4cf3a..524f656dc56d 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -19,16 +19,23 @@
 #include <linux/major.h>
 #include <linux/fs.h>
 #include <linux/interrupt.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
 #include <linux/mmc/host.h>
 #include <linux/pm.h>
 #include <linux/backlight.h>
+#include <linux/io.h>
+#include <linux/i2c.h>
+#include <linux/i2c/pca953x.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/ads7846.h>
+#include <linux/spi/corgi_lcd.h>
 
 #include <asm/setup.h>
 #include <asm/memory.h>
 #include <asm/mach-types.h>
 #include <mach/hardware.h>
 #include <asm/irq.h>
-#include <asm/io.h>
 #include <asm/system.h>
 
 #include <asm/mach/arch.h>
@@ -37,7 +44,7 @@
 
 #include <mach/pxa-regs.h>
 #include <mach/pxa2xx-regs.h>
-#include <mach/pxa2xx-gpio.h>
+#include <mach/mfp-pxa27x.h>
 #include <mach/pxa27x-udc.h>
 #include <mach/reset.h>
 #include <mach/i2c.h>
@@ -46,7 +53,7 @@
 #include <mach/ohci.h>
 #include <mach/udc.h>
 #include <mach/pxafb.h>
-#include <mach/akita.h>
+#include <mach/pxa2xx_spi.h>
 #include <mach/spitz.h>
 #include <mach/sharpsl.h>
 
@@ -57,6 +64,66 @@
 #include "devices.h"
 #include "sharpsl.h"
 
+static unsigned long spitz_pin_config[] __initdata = {
+        /* Chip Selects */
+        GPIO78_nCS_2,   /* SCOOP #2 */
+        GPIO80_nCS_4,   /* SCOOP #1 */
+
+        /* LCD - 16bpp Active TFT */
+        GPIO58_LCD_LDD_0,
+        GPIO59_LCD_LDD_1,
+        GPIO60_LCD_LDD_2,
+        GPIO61_LCD_LDD_3,
+        GPIO62_LCD_LDD_4,
+        GPIO63_LCD_LDD_5,
+        GPIO64_LCD_LDD_6,
+        GPIO65_LCD_LDD_7,
+        GPIO66_LCD_LDD_8,
+        GPIO67_LCD_LDD_9,
+        GPIO68_LCD_LDD_10,
+        GPIO69_LCD_LDD_11,
+        GPIO70_LCD_LDD_12,
+        GPIO71_LCD_LDD_13,
+        GPIO72_LCD_LDD_14,
+        GPIO73_LCD_LDD_15,
+        GPIO74_LCD_FCLK,
+        GPIO75_LCD_LCLK,
+        GPIO76_LCD_PCLK,
+
+        /* PC Card */
+        GPIO48_nPOE,
+        GPIO49_nPWE,
+        GPIO50_nPIOR,
+        GPIO51_nPIOW,
+        GPIO85_nPCE_1,
+        GPIO54_nPCE_2,
+        GPIO79_PSKTSEL,
+        GPIO55_nPREG,
+        GPIO56_nPWAIT,
+        GPIO57_nIOIS16,
+
+        /* MMC */
+        GPIO32_MMC_CLK,
+        GPIO112_MMC_CMD,
+        GPIO92_MMC_DAT_0,
+        GPIO109_MMC_DAT_1,
+        GPIO110_MMC_DAT_2,
+        GPIO111_MMC_DAT_3,
+
+        /* GPIOs */
+        GPIO9_GPIO,     /* SPITZ_GPIO_nSD_DETECT */
+        GPIO81_GPIO,    /* SPITZ_GPIO_nSD_WP */
+        GPIO41_GPIO,    /* SPITZ_GPIO_USB_CONNECT */
+        GPIO37_GPIO,    /* SPITZ_GPIO_USB_HOST */
+        GPIO35_GPIO,    /* SPITZ_GPIO_USB_DEVICE */
+        GPIO22_GPIO,    /* SPITZ_GPIO_HSYNC */
+        GPIO94_GPIO,    /* SPITZ_GPIO_CF_CD */
+        GPIO105_GPIO,   /* SPITZ_GPIO_CF_IRQ */
+        GPIO106_GPIO,   /* SPITZ_GPIO_CF2_IRQ */
+
+        GPIO1_GPIO | WAKEUP_ON_EDGE_RISE,
+};
+
 /*
  * Spitz SCOOP Device #1
  */
@@ -69,10 +136,11 @@ static struct resource spitz_scoop_resources[] = {
 };
 
 static struct scoop_config spitz_scoop_setup = {
-        .io_dir         = SPITZ_SCP_IO_DIR,
+        .io_dir         = SPITZ_SCP_IO_DIR,
         .io_out         = SPITZ_SCP_IO_OUT,
-        .suspend_clr = SPITZ_SCP_SUS_CLR,
-        .suspend_set = SPITZ_SCP_SUS_SET,
+        .suspend_clr    = SPITZ_SCP_SUS_CLR,
+        .suspend_set    = SPITZ_SCP_SUS_SET,
+        .gpio_base      = SPITZ_SCP_GPIO_BASE,
 };
 
 struct platform_device spitzscoop_device = {
@@ -97,10 +165,11 @@ static struct resource spitz_scoop2_resources[] = {
 };
 
 static struct scoop_config spitz_scoop2_setup = {
-        .io_dir         = SPITZ_SCP2_IO_DIR,
+        .io_dir         = SPITZ_SCP2_IO_DIR,
         .io_out         = SPITZ_SCP2_IO_OUT,
-        .suspend_clr = SPITZ_SCP2_SUS_CLR,
-        .suspend_set = SPITZ_SCP2_SUS_SET,
+        .suspend_clr    = SPITZ_SCP2_SUS_CLR,
+        .suspend_set    = SPITZ_SCP2_SUS_SET,
+        .gpio_base      = SPITZ_SCP2_GPIO_BASE,
 };
 
 struct platform_device spitzscoop2_device = {
@@ -122,7 +191,7 @@ static void spitz_card_pwr_ctrl(int device, unsigned short new_cpr)
         unsigned short cpr = read_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR);
 
         if (new_cpr & 0x0007) {
-                set_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_CF_POWER);
+                gpio_set_value(SPITZ_GPIO_CF_POWER, 1);
                 if (!(cpr & 0x0002) && !(cpr & 0x0004))
                         mdelay(5);
                 if (device == SPITZ_PWR_CF)
@@ -138,34 +207,13 @@ static void spitz_card_pwr_ctrl(int device, unsigned short new_cpr)
                 if (!(cpr & 0x0002) && !(cpr & 0x0004)) {
                         write_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR, 0x0000);
                         mdelay(1);
-                        reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_CF_POWER);
+                        gpio_set_value(SPITZ_GPIO_CF_POWER, 0);
                 } else {
                         write_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR, cpr | new_cpr);
                 }
         }
 }
 
-static void spitz_pcmcia_init(void)
-{
-        /* Setup default state of GPIO outputs
-           before we enable them as outputs. */
-        GPSR(GPIO48_nPOE) = GPIO_bit(GPIO48_nPOE) |
-                GPIO_bit(GPIO49_nPWE) | GPIO_bit(GPIO50_nPIOR) |
-                GPIO_bit(GPIO51_nPIOW) | GPIO_bit(GPIO54_nPCE_2);
-        GPSR(GPIO85_nPCE_1) = GPIO_bit(GPIO85_nPCE_1);
-
-        pxa_gpio_mode(GPIO48_nPOE_MD);
-        pxa_gpio_mode(GPIO49_nPWE_MD);
-        pxa_gpio_mode(GPIO50_nPIOR_MD);
-        pxa_gpio_mode(GPIO51_nPIOW_MD);
-        pxa_gpio_mode(GPIO55_nPREG_MD);
-        pxa_gpio_mode(GPIO56_nPWAIT_MD);
-        pxa_gpio_mode(GPIO57_nIOIS16_MD);
-        pxa_gpio_mode(GPIO85_nPCE_1_MD);
-        pxa_gpio_mode(GPIO54_nPCE_2_MD);
-        pxa_gpio_mode(GPIO104_pSKTSEL_MD);
-}
-
 static void spitz_pcmcia_pwr(struct device *scoop, unsigned short cpr, int nr)
 {
         /* Only need to override behaviour for slot 0 */
@@ -191,165 +239,169 @@ static struct scoop_pcmcia_dev spitz_pcmcia_scoop[] = {
 static struct scoop_pcmcia_config spitz_pcmcia_config = {
         .devs         = &spitz_pcmcia_scoop[0],
         .num_devs     = 2,
-        .pcmcia_init  = spitz_pcmcia_init,
         .power_ctrl   = spitz_pcmcia_pwr,
 };
 
 EXPORT_SYMBOL(spitzscoop_device);
 EXPORT_SYMBOL(spitzscoop2_device);
 
-
 /*
- * Spitz SSP Device
- *
- * Set the parent as the scoop device because a lot of SSP devices
- * also use scoop functions and this makes the power up/down order
- * work correctly.
+ * Spitz Keyboard Device
  */
-struct platform_device spitzssp_device = {
-        .name           = "corgi-ssp",
-        .dev            = {
-                .parent = &spitzscoop_device.dev,
-        },
+static struct platform_device spitzkbd_device = {
+        .name           = "spitz-keyboard",
         .id             = -1,
 };
 
-struct corgissp_machinfo spitz_ssp_machinfo = {
-        .port           = 2,
-        .cs_lcdcon      = SPITZ_GPIO_LCDCON_CS,
-        .cs_ads7846     = SPITZ_GPIO_ADS7846_CS,
-        .cs_max1111     = SPITZ_GPIO_MAX1111_CS,
-        .clk_lcdcon     = 520,
-        .clk_ads7846    = 14,
-        .clk_max1111    = 56,
-};
-
 
 /*
- * Spitz Backlight Device
+ * Spitz LEDs
  */
-static void spitz_bl_kick_battery(void)
-{
-        void (*kick_batt)(void);
-
-        kick_batt = symbol_get(sharpsl_battery_kick);
-        if (kick_batt) {
-                kick_batt();
-                symbol_put(sharpsl_battery_kick);
-        }
-}
-
-static struct generic_bl_info spitz_bl_machinfo = {
-        .name = "corgi-bl",
-        .default_intensity = 0x1f,
-        .limit_mask = 0x0b,
-        .max_intensity = 0x2f,
-        .kick_battery = spitz_bl_kick_battery,
-};
-
-static struct platform_device spitzbl_device = {
-        .name           = "generic-bl",
-        .dev            = {
-                .platform_data  = &spitz_bl_machinfo,
+static struct gpio_led spitz_gpio_leds[] = {
+        {
+                .name                   = "spitz:amber:charge",
+                .default_trigger        = "sharpsl-charge",
+                .gpio                   = SPITZ_GPIO_LED_ORANGE,
+        },
+        {
+                .name                   = "spitz:green:hddactivity",
+                .default_trigger        = "ide-disk",
+                .gpio                   = SPITZ_GPIO_LED_GREEN,
         },
-        .id             = -1,
 };
 
-
-/*
- * Spitz Keyboard Device
- */
-static struct platform_device spitzkbd_device = {
-        .name           = "spitz-keyboard",
-        .id             = -1,
+static struct gpio_led_platform_data spitz_gpio_leds_info = {
+        .leds           = spitz_gpio_leds,
+        .num_leds       = ARRAY_SIZE(spitz_gpio_leds),
 };
 
-
-/*
- * Spitz LEDs
- */
 static struct platform_device spitzled_device = {
-        .name           = "spitz-led",
+        .name           = "leds-gpio",
         .id             = -1,
+        .dev            = {
+                .platform_data = &spitz_gpio_leds_info,
+        },
 };
 
-/*
- * Spitz Touch Screen Device
- */
+#if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE)
+static struct pxa2xx_spi_master spitz_spi_info = {
+        .num_chipselect = 3,
+};
 
-static unsigned long (*get_hsync_invperiod)(struct device *dev);
+static struct ads7846_platform_data spitz_ads7846_info = {
+        .model                  = 7846,
+        .vref_delay_usecs       = 100,
+        .x_plate_ohms           = 419,
+        .y_plate_ohms           = 486,
+        .gpio_pendown           = SPITZ_GPIO_TP_INT,
+};
 
-static void inline sharpsl_wait_sync(int gpio)
+static void spitz_ads7846_cs(u32 command)
 {
-        while((GPLR(gpio) & GPIO_bit(gpio)) == 0);
-        while((GPLR(gpio) & GPIO_bit(gpio)) != 0);
+        gpio_set_value(SPITZ_GPIO_ADS7846_CS, !(command == PXA2XX_CS_ASSERT));
 }
 
-static struct device *spitz_pxafb_dev;
+static struct pxa2xx_spi_chip spitz_ads7846_chip = {
+        .cs_control             = spitz_ads7846_cs,
+};
 
-static int is_pxafb_device(struct device * dev, void * data)
+static void spitz_bl_kick_battery(void)
 {
-        struct platform_device *pdev = container_of(dev, struct platform_device, dev);
-
-        return (strncmp(pdev->name, "pxa2xx-fb", 9) == 0);
-}
+        void (*kick_batt)(void);
 
-static unsigned long spitz_get_hsync_invperiod(void)
-{
-#ifdef CONFIG_FB_PXA
-        if (!spitz_pxafb_dev) {
-                spitz_pxafb_dev = bus_find_device(&platform_bus_type, NULL, NULL, is_pxafb_device);
-                if (!spitz_pxafb_dev)
-                        return 0;
+        kick_batt = symbol_get(sharpsl_battery_kick);
+        if (kick_batt) {
+                kick_batt();
+                symbol_put(sharpsl_battery_kick);
         }
-        if (!get_hsync_invperiod)
-                get_hsync_invperiod = symbol_get(pxafb_get_hsync_time);
-        if (!get_hsync_invperiod)
-#endif
-                return 0;
-
-        return get_hsync_invperiod(spitz_pxafb_dev);
 }
 
-static void spitz_put_hsync(void)
-{
-        put_device(spitz_pxafb_dev);
-        if (get_hsync_invperiod)
-                symbol_put(pxafb_get_hsync_time);
-        spitz_pxafb_dev = NULL;
-        get_hsync_invperiod = NULL;
-}
+static struct corgi_lcd_platform_data spitz_lcdcon_info = {
+        .init_mode              = CORGI_LCD_MODE_VGA,
+        .max_intensity          = 0x2f,
+        .default_intensity      = 0x1f,
+        .limit_mask             = 0x0b,
+        .gpio_backlight_cont    = SPITZ_GPIO_BACKLIGHT_CONT,
+        .gpio_backlight_on      = SPITZ_GPIO_BACKLIGHT_ON,
+        .kick_battery           = spitz_bl_kick_battery,
+};
 
-static void spitz_wait_hsync(void)
+static void spitz_lcdcon_cs(u32 command)
 {
-        sharpsl_wait_sync(SPITZ_GPIO_HSYNC);
+        gpio_set_value(SPITZ_GPIO_LCDCON_CS, !(command == PXA2XX_CS_ASSERT));
 }
 
-static struct resource spitzts_resources[] = {
-        [0] = {
-                .start          = SPITZ_IRQ_GPIO_TP_INT,
-                .end            = SPITZ_IRQ_GPIO_TP_INT,
-                .flags          = IORESOURCE_IRQ,
-        },
+static struct pxa2xx_spi_chip spitz_lcdcon_chip = {
+        .cs_control     = spitz_lcdcon_cs,
 };
 
-static struct corgits_machinfo  spitz_ts_machinfo = {
-        .get_hsync_invperiod = spitz_get_hsync_invperiod,
-        .put_hsync           = spitz_put_hsync,
-        .wait_hsync          = spitz_wait_hsync,
+static void spitz_max1111_cs(u32 command)
+{
+        gpio_set_value(SPITZ_GPIO_MAX1111_CS, !(command == PXA2XX_CS_ASSERT));
+}
+
+static struct pxa2xx_spi_chip spitz_max1111_chip = {
+        .cs_control     = spitz_max1111_cs,
 };
 
-static struct platform_device spitzts_device = {
-        .name           = "corgi-ts",
-        .dev            = {
-                .parent = &spitzssp_device.dev,
-                .platform_data  = &spitz_ts_machinfo,
+static struct spi_board_info spitz_spi_devices[] = {
+        {
+                .modalias       = "ads7846",
+                .max_speed_hz   = 1200000,
+                .bus_num        = 2,
+                .chip_select    = 0,
+                .platform_data  = &spitz_ads7846_info,
+                .controller_data= &spitz_ads7846_chip,
+                .irq            = gpio_to_irq(SPITZ_GPIO_TP_INT),
+        }, {
+                .modalias       = "corgi-lcd",
+                .max_speed_hz   = 50000,
+                .bus_num        = 2,
+                .chip_select    = 1,
+                .platform_data  = &spitz_lcdcon_info,
+                .controller_data= &spitz_lcdcon_chip,
+        }, {
+                .modalias       = "max1111",
+                .max_speed_hz   = 450000,
+                .bus_num        = 2,
+                .chip_select    = 2,
+                .controller_data= &spitz_max1111_chip,
         },
-        .id             = -1,
-        .num_resources  = ARRAY_SIZE(spitzts_resources),
-        .resource       = spitzts_resources,
 };
 
+static void __init spitz_init_spi(void)
+{
+        int err;
+
+        err = gpio_request(SPITZ_GPIO_ADS7846_CS, "ADS7846_CS");
+        if (err)
+                return;
+
+        err = gpio_request(SPITZ_GPIO_LCDCON_CS, "LCDCON_CS");
+        if (err)
+                goto err_free_1;
+
+        err = gpio_request(SPITZ_GPIO_MAX1111_CS, "MAX1111_CS");
+        if (err)
+                goto err_free_2;
+
+        if (machine_is_akita()) {
+                spitz_lcdcon_info.gpio_backlight_cont = AKITA_GPIO_BACKLIGHT_CONT;
+                spitz_lcdcon_info.gpio_backlight_on = AKITA_GPIO_BACKLIGHT_ON;
+        }
+
+        pxa2xx_set_spi_info(2, &spitz_spi_info);
+        spi_register_board_info(ARRAY_AND_SIZE(spitz_spi_devices));
+        return;
+
+err_free_2:
+        gpio_free(SPITZ_GPIO_LCDCON_CS);
+err_free_1:
+        gpio_free(SPITZ_GPIO_ADS7846_CS);
+}
+#else
+static inline void spitz_init_spi(void) {}
+#endif
 
 /*
  * MMC/SD Device
@@ -364,24 +416,35 @@ static int spitz_mci_init(struct device *dev, irq_handler_t spitz_detect_int, vo
 {
         int err;
 
-        /* setup GPIO for PXA27x MMC controller */
-        pxa_gpio_mode(GPIO32_MMCCLK_MD);
-        pxa_gpio_mode(GPIO112_MMCCMD_MD);
-        pxa_gpio_mode(GPIO92_MMCDAT0_MD);
-        pxa_gpio_mode(GPIO109_MMCDAT1_MD);
-        pxa_gpio_mode(GPIO110_MMCDAT2_MD);
-        pxa_gpio_mode(GPIO111_MMCDAT3_MD);
-        pxa_gpio_mode(SPITZ_GPIO_nSD_DETECT | GPIO_IN);
-        pxa_gpio_mode(SPITZ_GPIO_nSD_WP | GPIO_IN);
+        err = gpio_request(SPITZ_GPIO_nSD_DETECT, "nSD_DETECT");
+        if (err)
+                goto err_out;
+
+        err = gpio_request(SPITZ_GPIO_nSD_WP, "nSD_WP");
+        if (err)
+                goto err_free_1;
+
+        gpio_direction_input(SPITZ_GPIO_nSD_DETECT);
+        gpio_direction_input(SPITZ_GPIO_nSD_WP);
 
         spitz_mci_platform_data.detect_delay = msecs_to_jiffies(250);
 
         err = request_irq(SPITZ_IRQ_GPIO_nSD_DETECT, spitz_detect_int,
-                          IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+                          IRQF_DISABLED | IRQF_TRIGGER_RISING |
+                          IRQF_TRIGGER_FALLING,
                           "MMC card detect", data);
-        if (err)
-                printk(KERN_ERR "spitz_mci_init: MMC/SD: can't request MMC card detect IRQ\n");
+        if (err) {
+                pr_err("%s: MMC/SD: can't request MMC card detect IRQ\n",
+                                __func__);
+                goto err_free_2;
+        }
+        return 0;
 
+err_free_2:
+        gpio_free(SPITZ_GPIO_nSD_WP);
+err_free_1:
+        gpio_free(SPITZ_GPIO_nSD_DETECT);
+err_out:
         return err;
 }
 
@@ -397,12 +460,14 @@ static void spitz_mci_setpower(struct device *dev, unsigned int vdd)
 
 static int spitz_mci_get_ro(struct device *dev)
 {
-        return GPLR(SPITZ_GPIO_nSD_WP) & GPIO_bit(SPITZ_GPIO_nSD_WP);
+        return gpio_get_value(SPITZ_GPIO_nSD_WP);
 }
 
 static void spitz_mci_exit(struct device *dev, void *data)
 {
         free_irq(SPITZ_IRQ_GPIO_nSD_DETECT, data);
+        gpio_free(SPITZ_GPIO_nSD_WP);
+        gpio_free(SPITZ_GPIO_nSD_DETECT);
 }
 
 static struct pxamci_platform_data spitz_mci_platform_data = {
@@ -419,27 +484,24 @@ static struct pxamci_platform_data spitz_mci_platform_data = {
  */
 static int spitz_ohci_init(struct device *dev)
 {
-        /* Only Port 2 is connected */
-        pxa_gpio_mode(SPITZ_GPIO_USB_CONNECT | GPIO_IN);
-        pxa_gpio_mode(SPITZ_GPIO_USB_HOST | GPIO_OUT);
-        pxa_gpio_mode(SPITZ_GPIO_USB_DEVICE | GPIO_IN);
-
-        /* Setup USB Port 2 Output Control Register */
-        UP2OCR = UP2OCR_HXS | UP2OCR_HXOE | UP2OCR_DPPDE | UP2OCR_DMPDE;
-
-        GPSR(SPITZ_GPIO_USB_HOST) = GPIO_bit(SPITZ_GPIO_USB_HOST);
+        int err;
 
-        UHCHR = (UHCHR) &
-                ~(UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSEP3 | UHCHR_SSE);
+        err = gpio_request(SPITZ_GPIO_USB_HOST, "USB_HOST");
+        if (err)
+                return err;
 
-        UHCRHDA |= UHCRHDA_NOCP;
+        /* Only Port 2 is connected
+         * Setup USB Port 2 Output Control Register
+         */
+        UP2OCR = UP2OCR_HXS | UP2OCR_HXOE | UP2OCR_DPPDE | UP2OCR_DMPDE;
 
-        return 0;
+        return gpio_direction_output(SPITZ_GPIO_USB_HOST, 1);
 }
 
 static struct pxaohci_platform_data spitz_ohci_platform_data = {
         .port_mode      = PMM_NPS_MODE,
         .init           = spitz_ohci_init,
+        .flags          = ENABLE_PORT_ALL | NO_OC_PROTECTION,
         .power_budget   = 150,
 };
 
@@ -447,29 +509,50 @@ static struct pxaohci_platform_data spitz_ohci_platform_data = {
 /*
  * Irda
  */
+static int spitz_irda_startup(struct device *dev)
+{
+        int rc;
+
+        rc = gpio_request(SPITZ_GPIO_IR_ON, "IrDA on");
+        if (rc)
+                goto err;
+
+        rc = gpio_direction_output(SPITZ_GPIO_IR_ON, 1);
+        if (rc)
+                goto err_dir;
+
+        return 0;
+
+err_dir:
+        gpio_free(SPITZ_GPIO_IR_ON);
+err:
+        return rc;
+}
+
+static void spitz_irda_shutdown(struct device *dev)
+{
+        gpio_free(SPITZ_GPIO_IR_ON);
+}
+
 static void spitz_irda_transceiver_mode(struct device *dev, int mode)
 {
-        if (mode & IR_OFF)
-                set_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_IR_ON);
-        else
-                reset_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_IR_ON);
+        gpio_set_value(SPITZ_GPIO_IR_ON, mode & IR_OFF);
         pxa2xx_transceiver_mode(dev, mode);
 }
 
 #ifdef CONFIG_MACH_AKITA
 static void akita_irda_transceiver_mode(struct device *dev, int mode)
 {
-        if (mode & IR_OFF)
-                akita_set_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_IR_ON);
-        else
-                akita_reset_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_IR_ON);
+        gpio_set_value(AKITA_GPIO_IR_ON, mode & IR_OFF);
         pxa2xx_transceiver_mode(dev, mode);
 }
 #endif
 
 static struct pxaficp_platform_data spitz_ficp_platform_data = {
-        .transceiver_cap  = IR_SIRMODE | IR_OFF,
-        .transceiver_mode = spitz_irda_transceiver_mode,
+        .transceiver_cap        = IR_SIRMODE | IR_OFF,
+        .transceiver_mode       = spitz_irda_transceiver_mode,
+        .startup                = spitz_irda_startup,
+        .shutdown               = spitz_irda_shutdown,
 };
 
 
@@ -477,14 +560,6 @@ static struct pxaficp_platform_data spitz_ficp_platform_data = {
  * Spitz PXA Framebuffer
  */
 
-static void spitz_lcd_power(int on, struct fb_var_screeninfo *var)
-{
-        if (on)
-                corgi_lcdtg_hw_init(var->xres);
-        else
-                corgi_lcdtg_suspend();
-}
-
 static struct pxafb_mode_info spitz_pxafb_modes[] = {
 {
         .pixclock       = 19231,
@@ -517,18 +592,13 @@ static struct pxafb_mach_info spitz_pxafb_info = {
         .modes          = &spitz_pxafb_modes[0],
         .num_modes      = 2,
         .fixed_modes    = 1,
-        .lccr0          = LCCR0_Color | LCCR0_Sngl | LCCR0_Act | LCCR0_LDDALT | LCCR0_OUC | LCCR0_CMDIM | LCCR0_RDSTM,
-        .lccr3          = LCCR3_PixRsEdg | LCCR3_OutEnH,
-        .pxafb_lcd_power = spitz_lcd_power,
+        .lcd_conn       = LCD_COLOR_TFT_16BPP | LCD_ALTERNATE_MAPPING,
 };
 
 
 static struct platform_device *devices[] __initdata = {
         &spitzscoop_device,
-        &spitzssp_device,
         &spitzkbd_device,
-        &spitzts_device,
-        &spitzbl_device,
         &spitzled_device,
 };
 
@@ -548,63 +618,32 @@ static void spitz_restart(char mode)
 
 static void __init common_init(void)
 {
-        init_gpio_reset(SPITZ_GPIO_ON_RESET);
+        init_gpio_reset(SPITZ_GPIO_ON_RESET, 1);
         pm_power_off = spitz_poweroff;
         arm_pm_restart = spitz_restart;
 
         PMCR = 0x00;
 
-        /* setup sleep mode values */
-        PWER  = 0x00000002;
-        PFER  = 0x00000000;
-        PRER  = 0x00000002;
-        PGSR0 = 0x0158C000;
-        PGSR1 = 0x00FF0080;
-        PGSR2 = 0x0001C004;
-
         /* Stop 3.6MHz and drive HIGH to PCMCIA and CS */
         PCFR |= PCFR_OPDE;
 
-        corgi_ssp_set_machinfo(&spitz_ssp_machinfo);
+        pxa2xx_mfp_config(ARRAY_AND_SIZE(spitz_pin_config));
 
-        pxa_gpio_mode(SPITZ_GPIO_HSYNC | GPIO_IN);
+        spitz_init_spi();
 
         platform_add_devices(devices, ARRAY_SIZE(devices));
         pxa_set_mci_info(&spitz_mci_platform_data);
         pxa_set_ohci_info(&spitz_ohci_platform_data);
         pxa_set_ficp_info(&spitz_ficp_platform_data);
-        set_pxa_fb_parent(&spitzssp_device.dev);
         set_pxa_fb_info(&spitz_pxafb_info);
         pxa_set_i2c_info(NULL);
 }
 
 #if defined(CONFIG_MACH_SPITZ) || defined(CONFIG_MACH_BORZOI)
-static void spitz_bl_set_intensity(int intensity)
-{
-        if (intensity > 0x10)
-                intensity += 0x10;
-
-        /* Bits 0-4 are accessed via the SSP interface */
-        corgi_ssp_blduty_set(intensity & 0x1f);
-
-        /* Bit 5 is via SCOOP */
-        if (intensity & 0x0020)
-                reset_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_BACKLIGHT_CONT);
-        else
-                set_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_BACKLIGHT_CONT);
-
-        if (intensity)
-                set_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_BACKLIGHT_ON);
-        else
-                reset_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_BACKLIGHT_ON);
-}
-
 static void __init spitz_init(void)
 {
         platform_scoop_config = &spitz_pcmcia_config;
 
-        spitz_bl_machinfo.set_bl_intensity = spitz_bl_set_intensity;
-
         common_init();
 
         platform_device_register(&spitzscoop2_device);
@@ -615,32 +654,17 @@ static void __init spitz_init(void)
 /*
  * Akita IO Expander
  */
-struct platform_device akitaioexp_device = {
-        .name           = "akita-ioexp",
-        .id             = -1,
+static struct pca953x_platform_data akita_ioexp = {
+        .gpio_base              = AKITA_IOEXP_GPIO_BASE,
 };
 
-EXPORT_SYMBOL_GPL(akitaioexp_device);
-
-static void akita_bl_set_intensity(int intensity)
-{
-        if (intensity > 0x10)
-                intensity += 0x10;
-
-        /* Bits 0-4 are accessed via the SSP interface */
-        corgi_ssp_blduty_set(intensity & 0x1f);
-
-        /* Bit 5 is via IO-Expander */
-        if (intensity & 0x0020)
-                akita_reset_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_BACKLIGHT_CONT);
-        else
-                akita_set_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_BACKLIGHT_CONT);
-
-        if (intensity)
-                akita_set_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_BACKLIGHT_ON);
-        else
-                akita_reset_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_BACKLIGHT_ON);
-}
+static struct i2c_board_info akita_i2c_board_info[] = {
+        {
+                .type           = "max7310",
+                .addr           = 0x18,
+                .platform_data  = &akita_ioexp,
+        },
+};
 
 static void __init akita_init(void)
 {
@@ -649,11 +673,10 @@ static void __init akita_init(void)
         /* We just pretend the second element of the array doesn't exist */
         spitz_pcmcia_config.num_devs = 1;
         platform_scoop_config = &spitz_pcmcia_config;
-        spitz_bl_machinfo.set_bl_intensity = akita_bl_set_intensity;
 
-        platform_device_register(&akitaioexp_device);
+        pxa_set_i2c_info(NULL);
+        i2c_register_board_info(0, ARRAY_AND_SIZE(akita_i2c_board_info));
 
-        spitzscoop_device.dev.parent = &akitaioexp_device.dev;
         common_init();
 }
 #endif