1 files changed, 139 insertions, 64 deletions

diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c
index 49d951db0f3d..30023b00e476 100644
--- a/arch/arm/mach-pxa/pcm990-baseboard.c
+++ b/arch/arm/mach-pxa/pcm990-baseboard.c
@@ -24,6 +24,7 @@
 #include <linux/platform_device.h>
 #include <linux/ide.h>
 #include <linux/i2c.h>
+#include <linux/pwm_backlight.h>
 
 #include <media/soc_camera.h>
 
@@ -32,13 +33,120 @@
 #include <asm/arch/camera.h>
 #include <asm/mach/map.h>
 #include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
+#include <asm/arch/audio.h>
 #include <asm/arch/mmc.h>
 #include <asm/arch/ohci.h>
 #include <asm/arch/pcm990_baseboard.h>
+#include <asm/arch/pxafb.h>
+#include <asm/arch/mfp-pxa27x.h>
+
+#include "devices.h"
+#include "generic.h"
+
+static unsigned long pcm990_pin_config[] __initdata = {
+        /* MMC */
+        GPIO32_MMC_CLK,
+        GPIO112_MMC_CMD,
+        GPIO92_MMC_DAT_0,
+        GPIO109_MMC_DAT_1,
+        GPIO110_MMC_DAT_2,
+        GPIO111_MMC_DAT_3,
+        /* USB */
+        GPIO88_USBH1_PWR,
+        GPIO89_USBH1_PEN,
+        /* PWM0 */
+        GPIO16_PWM0_OUT,
+};
 
 /*
- * The PCM-990 development baseboard uses PCM-027's hardeware in the
+ * pcm990_lcd_power - control power supply to the LCD
+ * @on: 0 = switch off, 1 = switch on
+ *
+ * Called by the pxafb driver
+ */
+#ifndef CONFIG_PCM990_DISPLAY_NONE
+static void pcm990_lcd_power(int on, struct fb_var_screeninfo *var)
+{
+        if (on) {
+                /* enable LCD-Latches
+                 * power on LCD
+                 */
+                __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG3) =
+                        PCM990_CTRL_LCDPWR + PCM990_CTRL_LCDON;
+        } else {
+                /* disable LCD-Latches
+                 * power off LCD
+                 */
+                __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG3) = 0x00;
+        }
+}
+#endif
+
+#if defined(CONFIG_PCM990_DISPLAY_SHARP)
+static struct pxafb_mode_info fb_info_sharp_lq084v1dg21 = {
+        .pixclock               = 28000,
+        .xres                   = 640,
+        .yres                   = 480,
+        .bpp                    = 16,
+        .hsync_len              = 20,
+        .left_margin            = 103,
+        .right_margin           = 47,
+        .vsync_len              = 6,
+        .upper_margin           = 28,
+        .lower_margin           = 5,
+        .sync                   = 0,
+        .cmap_greyscale         = 0,
+};
+
+static struct pxafb_mach_info pcm990_fbinfo __initdata = {
+        .modes                  = &fb_info_sharp_lq084v1dg21,
+        .num_modes              = 1,
+        .lccr0                  = LCCR0_PAS,
+        .lccr3                  = LCCR3_PCP,
+        .pxafb_lcd_power        = pcm990_lcd_power,
+};
+#elif defined(CONFIG_PCM990_DISPLAY_NEC)
+struct pxafb_mode_info fb_info_nec_nl6448bc20_18d = {
+        .pixclock               = 39720,
+        .xres                   = 640,
+        .yres                   = 480,
+        .bpp                    = 16,
+        .hsync_len              = 32,
+        .left_margin            = 16,
+        .right_margin           = 48,
+        .vsync_len              = 2,
+        .upper_margin           = 12,
+        .lower_margin           = 17,
+        .sync                   = 0,
+        .cmap_greyscale         = 0,
+};
+
+static struct pxafb_mach_info pcm990_fbinfo __initdata = {
+        .modes                  = &fb_info_nec_nl6448bc20_18d,
+        .num_modes              = 1,
+        .lccr0                  = LCCR0_Act,
+        .lccr3                  = LCCR3_PixFlEdg,
+        .pxafb_lcd_power        = pcm990_lcd_power,
+};
+#endif
+
+static struct platform_pwm_backlight_data pcm990_backlight_data = {
+        .pwm_id         = 0,
+        .max_brightness = 1023,
+        .dft_brightness = 1023,
+        .pwm_period_ns  = 78770,
+};
+
+static struct platform_device pcm990_backlight_device = {
+        .name           = "pwm-backlight",
+        .dev            = {
+                .parent = &pxa27x_device_pwm0.dev,
+                .platform_data = &pcm990_backlight_data,
+        },
+};
+
+/*
+ * The PCM-990 development baseboard uses PCM-027's hardware in the
  * following way:
  *
  * - LCD support is in use
@@ -185,16 +293,6 @@ static int pcm990_mci_init(struct device *dev, irq_handler_t mci_detect_int,
 {
         int err;
 
-        /*
-         * enable GPIO for PXA27x MMC controller
-         */
-        pxa_gpio_mode(GPIO32_MMCCLK_MD);
-        pxa_gpio_mode(GPIO112_MMCCMD_MD);
-        pxa_gpio_mode(GPIO92_MMCDAT0_MD);
-        pxa_gpio_mode(GPIO109_MMCDAT1_MD);
-        pxa_gpio_mode(GPIO110_MMCDAT2_MD);
-        pxa_gpio_mode(GPIO111_MMCDAT3_MD);
-
         err = request_irq(PCM027_MMCDET_IRQ, mci_detect_int, IRQF_DISABLED,
                              "MMC card detect", data);
         if (err)
@@ -241,8 +339,6 @@ static struct pxamci_platform_data pcm990_mci_platform_data = {
  */
 static int pcm990_ohci_init(struct device *dev)
 {
-        pxa_gpio_mode(PCM990_USB_OVERCURRENT);
-        pxa_gpio_mode(PCM990_USB_PWR_EN);
         /*
          * disable USB port 2 and 3
          * power sense is active low
@@ -269,23 +365,27 @@ static struct pxaohci_platform_data pcm990_ohci_platform_data = {
  * PXA27x Camera specific stuff
  */
 #if defined(CONFIG_VIDEO_PXA27x) || defined(CONFIG_VIDEO_PXA27x_MODULE)
+static unsigned long pcm990_camera_pin_config[] = {
+        /* CIF */
+        GPIO98_CIF_DD_0,
+        GPIO105_CIF_DD_1,
+        GPIO104_CIF_DD_2,
+        GPIO103_CIF_DD_3,
+        GPIO95_CIF_DD_4,
+        GPIO94_CIF_DD_5,
+        GPIO93_CIF_DD_6,
+        GPIO108_CIF_DD_7,
+        GPIO107_CIF_DD_8,
+        GPIO106_CIF_DD_9,
+        GPIO42_CIF_MCLK,
+        GPIO45_CIF_PCLK,
+        GPIO43_CIF_FV,
+        GPIO44_CIF_LV,
+};
+
 static int pcm990_pxacamera_init(struct device *dev)
 {
-        pxa_gpio_mode(GPIO98_CIF_DD_0_MD);
-        pxa_gpio_mode(GPIO105_CIF_DD_1_MD);
-        pxa_gpio_mode(GPIO104_CIF_DD_2_MD);
-        pxa_gpio_mode(GPIO103_CIF_DD_3_MD);
-        pxa_gpio_mode(GPIO95_CIF_DD_4_MD);
-        pxa_gpio_mode(GPIO94_CIF_DD_5_MD);
-        pxa_gpio_mode(GPIO93_CIF_DD_6_MD);
-        pxa_gpio_mode(GPIO108_CIF_DD_7_MD);
-        pxa_gpio_mode(GPIO107_CIF_DD_8_MD);
-        pxa_gpio_mode(GPIO106_CIF_DD_9_MD);
-        pxa_gpio_mode(GPIO42_CIF_MCLK_MD);
-        pxa_gpio_mode(GPIO45_CIF_PCLK_MD);
-        pxa_gpio_mode(GPIO43_CIF_FV_MD);
-        pxa_gpio_mode(GPIO44_CIF_LV_MD);
-
+        pxa2xx_mfp_config(ARRAY_AND_SIZE(pcm990_camera_pin_config));
         return 0;
 }
 
@@ -333,36 +433,6 @@ static struct i2c_board_info __initdata pcm990_i2c_devices[] = {
 #endif /* CONFIG_VIDEO_PXA27x ||CONFIG_VIDEO_PXA27x_MODULE */
 
 /*
- * AC97 support
- * Note: The connected AC97 mixer also reports interrupts at PCM990_AC97_IRQ
- */
-static struct resource pxa27x_ac97_resources[] = {
-        [0] = {
-                .start  = 0x40500000,
-                .end    = 0x40500000 + 0xfff,
-                .flags  = IORESOURCE_MEM,
-        },
-        [1] = {
-                .start  = IRQ_AC97,
-                .end    = IRQ_AC97,
-                .flags  = IORESOURCE_IRQ,
-        },
-};
-
-static u64 pxa_ac97_dmamask = 0xffffffffUL;
-
-static struct platform_device pxa27x_device_ac97 = {
-        .name           = "pxa2xx-ac97",
-        .id             = -1,
-        .dev            = {
-                .dma_mask = &pxa_ac97_dmamask,
-                .coherent_dma_mask = 0xffffffff,
-        },
-        .num_resources  = ARRAY_SIZE(pxa27x_ac97_resources),
-        .resource       = pxa27x_ac97_resources,
-};
-
-/*
  * enable generic access to the base board control CPLDs U6 and U7
  */
 static struct map_desc pcm990_io_desc[] __initdata = {
@@ -387,13 +457,18 @@ static struct map_desc pcm990_io_desc[] __initdata = {
  */
 void __init pcm990_baseboard_init(void)
 {
+        pxa2xx_mfp_config(ARRAY_AND_SIZE(pcm990_pin_config));
+
         /* register CPLD access */
-        iotable_init(pcm990_io_desc, ARRAY_SIZE(pcm990_io_desc));
+        iotable_init(ARRAY_AND_SIZE(pcm990_io_desc));
 
         /* register CPLD's IRQ controller */
         pcm990_init_irq();
 
-        platform_device_register(&pxa27x_device_ac97);
+#ifndef CONFIG_PCM990_DISPLAY_NONE
+        set_pxa_fb_info(&pcm990_fbinfo);
+#endif
+        platform_device_register(&pcm990_backlight_device);
 
         /* MMC */
         pxa_set_mci_info(&pcm990_mci_platform_data);
@@ -402,13 +477,13 @@ void __init pcm990_baseboard_init(void)
         pxa_set_ohci_info(&pcm990_ohci_platform_data);
 
         pxa_set_i2c_info(NULL);
+        pxa_set_ac97_info(NULL);
 
 #if defined(CONFIG_VIDEO_PXA27x) || defined(CONFIG_VIDEO_PXA27x_MODULE)
         pxa_set_camera_info(&pcm990_pxacamera_platform_data);
 
-        i2c_register_board_info(0, pcm990_i2c_devices,
-                ARRAY_SIZE(pcm990_i2c_devices));
+        i2c_register_board_info(0, ARRAY_AND_SIZE(pcm990_i2c_devices));
 #endif
 
-        printk(KERN_INFO"PCM-990 Evaluation baseboard initialized\n");
+        printk(KERN_INFO "PCM-990 Evaluation baseboard initialized\n");
 }