1 files changed, 82 insertions, 121 deletions

diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c
index 782903fe9c6c..2b427e015b6f 100644
--- a/arch/arm/mach-pxa/mioa701.c
+++ b/arch/arm/mach-pxa/mioa701.c
@@ -34,7 +34,7 @@
 #include <linux/irq.h>
 #include <linux/pda_power.h>
 #include <linux/power_supply.h>
-#include <linux/wm97xx.h>
+#include <linux/wm97xx_batt.h>
 #include <linux/mtd/physmap.h>
 
 #include <asm/mach-types.h>
@@ -46,6 +46,9 @@
 #include <mach/mmc.h>
 #include <mach/udc.h>
 #include <mach/pxa27x-udc.h>
+#include <mach/i2c.h>
+#include <mach/camera.h>
+#include <media/soc_camera.h>
 
 #include <mach/mioa701.h>
 
@@ -54,10 +57,11 @@
 
 static unsigned long mioa701_pin_config[] = {
         /* Mio global */
-        MIO_CFG_OUT(GPIO9_CHARGE_nEN, AF0, DRIVE_LOW),
+        MIO_CFG_OUT(GPIO9_CHARGE_EN, AF0, DRIVE_LOW),
         MIO_CFG_OUT(GPIO18_POWEROFF, AF0, DRIVE_LOW),
         MFP_CFG_OUT(GPIO3, AF0, DRIVE_HIGH),
         MFP_CFG_OUT(GPIO4, AF0, DRIVE_HIGH),
+        MIO_CFG_IN(GPIO80_MAYBE_CHARGE_VDROP, AF0),
 
         /* Backlight PWM 0 */
         GPIO16_PWM0_OUT,
@@ -74,7 +78,7 @@ static unsigned long mioa701_pin_config[] = {
         MIO_CFG_OUT(GPIO91_SDIO_EN, AF0, DRIVE_LOW),
 
         /* USB */
-        MIO_CFG_IN(GPIO13_USB_DETECT, AF0),
+        MIO_CFG_IN(GPIO13_nUSB_DETECT, AF0),
         MIO_CFG_OUT(GPIO22_USB_ENABLE, AF0, DRIVE_LOW),
 
         /* LCD */
@@ -98,12 +102,29 @@ static unsigned long mioa701_pin_config[] = {
         GPIO75_LCD_LCLK,
         GPIO76_LCD_PCLK,
 
+        /* QCI */
+        GPIO12_CIF_DD_7,
+        GPIO17_CIF_DD_6,
+        GPIO50_CIF_DD_3,
+        GPIO51_CIF_DD_2,
+        GPIO52_CIF_DD_4,
+        GPIO53_CIF_MCLK,
+        GPIO54_CIF_PCLK,
+        GPIO55_CIF_DD_1,
+        GPIO81_CIF_DD_0,
+        GPIO82_CIF_DD_5,
+        GPIO84_CIF_FV,
+        GPIO85_CIF_LV,
+
         /* Bluetooth */
+        MIO_CFG_IN(GPIO14_BT_nACTIVITY, AF0),
         GPIO44_BTUART_CTS,
         GPIO42_BTUART_RXD,
         GPIO45_BTUART_RTS,
         GPIO43_BTUART_TXD,
         MIO_CFG_OUT(GPIO83_BT_ON, AF0, DRIVE_LOW),
+        MIO_CFG_OUT(GPIO77_BT_UNKNOWN1, AF0, DRIVE_HIGH),
+        MIO_CFG_OUT(GPIO86_BT_MAYBE_nRESET, AF0, DRIVE_HIGH),
 
         /* GPS */
         MIO_CFG_OUT(GPIO23_GPS_UNKNOWN1, AF0, DRIVE_LOW),
@@ -151,16 +172,16 @@ static unsigned long mioa701_pin_config[] = {
         GPIO104_KP_MKOUT_1,
         GPIO105_KP_MKOUT_2,
 
+        /* I2C */
+        GPIO117_I2C_SCL,
+        GPIO118_I2C_SDA,
+
         /* Unknown */
-        MFP_CFG_IN(GPIO14, AF0),
         MFP_CFG_IN(GPIO20, AF0),
         MFP_CFG_IN(GPIO21, AF0),
         MFP_CFG_IN(GPIO33, AF0),
         MFP_CFG_OUT(GPIO49, AF0, DRIVE_HIGH),
         MFP_CFG_OUT(GPIO57, AF0, DRIVE_HIGH),
-        MFP_CFG_OUT(GPIO77, AF0, DRIVE_HIGH),
-        MFP_CFG_IN(GPIO80, AF0),
-        MFP_CFG_OUT(GPIO86, AF0, DRIVE_HIGH),
         MFP_CFG_IN(GPIO96, AF0),
         MFP_CFG_OUT(GPIO116, AF0, DRIVE_HIGH),
 };
@@ -407,7 +428,7 @@ static void udc_power_command(int cmd)
 
 static int is_usb_connected(void)
 {
-        return !!gpio_get_value(GPIO13_USB_DETECT);
+        return !gpio_get_value(GPIO13_nUSB_DETECT);
 }
 
 static struct pxa2xx_udc_mach_info mioa701_udc_info = {
@@ -659,13 +680,19 @@ static char *supplicants[] = {
         "mioa701_battery"
 };
 
+static int is_ac_connected(void)
+{
+        return gpio_get_value(GPIO96_AC_DETECT);
+}
+
 static void mioa701_set_charge(int flags)
 {
-        gpio_set_value(GPIO9_CHARGE_nEN, !flags);
+        gpio_set_value(GPIO9_CHARGE_EN, (flags == PDA_POWER_CHARGE_USB));
 }
 
 static struct pda_power_pdata power_pdata = {
-        .is_ac_online   = is_usb_connected,
+        .is_ac_online   = is_ac_connected,
+        .is_usb_online  = is_usb_connected,
         .set_charge = mioa701_set_charge,
         .supplied_to = supplicants,
         .num_supplicants = ARRAY_SIZE(supplicants),
@@ -674,8 +701,15 @@ static struct pda_power_pdata power_pdata = {
 static struct resource power_resources[] = {
         [0] = {
                 .name   = "ac",
-                .start  = gpio_to_irq(GPIO13_USB_DETECT),
-                .end    = gpio_to_irq(GPIO13_USB_DETECT),
+                .start  = gpio_to_irq(GPIO96_AC_DETECT),
+                .end    = gpio_to_irq(GPIO96_AC_DETECT),
+                .flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE |
+                IORESOURCE_IRQ_LOWEDGE,
+        },
+        [1] = {
+                .name   = "usb",
+                .start  = gpio_to_irq(GPIO13_nUSB_DETECT),
+                .end    = gpio_to_irq(GPIO13_nUSB_DETECT),
                 .flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE |
                 IORESOURCE_IRQ_LOWEDGE,
         },
@@ -691,120 +725,43 @@ static struct platform_device power_dev = {
         },
 };
 
-#if defined(CONFIG_PDA_POWER) && defined(CONFIG_TOUCHSCREEN_WM97XX)
-static struct wm97xx *battery_wm;
-
-static enum power_supply_property battery_props[] = {
-        POWER_SUPPLY_PROP_STATUS,
-        POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN,
-        POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
-        POWER_SUPPLY_PROP_VOLTAGE_NOW,
-        POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,   /* Necessary for apm */
+static struct wm97xx_batt_info mioa701_battery_data = {
+        .batt_aux       = WM97XX_AUX_ID1,
+        .temp_aux       = -1,
+        .charge_gpio    = -1,
+        .min_voltage    = 0xc00,
+        .max_voltage    = 0xfc0,
+        .batt_tech      = POWER_SUPPLY_TECHNOLOGY_LION,
+        .batt_div       = 1,
+        .batt_mult      = 1,
+        .batt_name      = "mioa701_battery",
 };
 
-static int get_battery_voltage(void)
-{
-        int adc = -1;
-
-        if (battery_wm)
-                adc = wm97xx_read_aux_adc(battery_wm, WM97XX_AUX_ID1);
-        return adc;
-}
-
-static int get_battery_status(struct power_supply *b)
-{
-        int status;
-
-        if (is_usb_connected())
-                status = POWER_SUPPLY_STATUS_CHARGING;
-        else
-                status = POWER_SUPPLY_STATUS_DISCHARGING;
-
-        return status;
-}
-
-static int get_property(struct power_supply *b,
-                        enum power_supply_property psp,
-                        union power_supply_propval *val)
-{
-        int rc = 0;
-
-        switch (psp) {
-        case POWER_SUPPLY_PROP_STATUS:
-                val->intval = get_battery_status(b);
-                break;
-        case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
-                val->intval = 0xfd0;
-                break;
-        case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN:
-                val->intval = 0xc00;
-                break;
-        case POWER_SUPPLY_PROP_VOLTAGE_NOW:
-                val->intval = get_battery_voltage();
-                break;
-        case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN:
-                val->intval = 100;
-                break;
-        default:
-                val->intval = -1;
-                rc = -1;
-        }
-
-        return rc;
+/*
+ * Camera interface
+ */
+struct pxacamera_platform_data mioa701_pxacamera_platform_data = {
+        .flags  = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 |
+                PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN,
+        .mclk_10khz = 5000,
 };
 
-static struct power_supply battery_ps = {
-        .name = "mioa701_battery",
-        .type = POWER_SUPPLY_TYPE_BATTERY,
-        .get_property = get_property,
-        .properties = battery_props,
-        .num_properties = ARRAY_SIZE(battery_props),
+static struct soc_camera_link iclink = {
+        .bus_id = 0, /* Must match id in pxa27x_device_camera in device.c */
 };
 
-static int battery_probe(struct platform_device *pdev)
-{
-        struct wm97xx *wm = platform_get_drvdata(pdev);
-        int rc;
-
-        battery_wm = wm;
-
-        rc = power_supply_register(NULL, &battery_ps);
-        if (rc)
-                dev_err(&pdev->dev,
-                "Could not register mioa701 battery -> %d\n", rc);
-        return rc;
-}
-
-static int battery_remove(struct platform_device *pdev)
-{
-        battery_wm = NULL;
-        return 0;
-}
-
-static struct platform_driver mioa701_battery_driver = {
-        .driver = {
-                .name = "wm97xx-battery",
+/* Board I2C devices. */
+static struct i2c_board_info __initdata mioa701_i2c_devices[] = {
+        {
+                /* Must initialize before the camera(s) */
+                I2C_BOARD_INFO("mt9m111", 0x5d),
+                .platform_data = &iclink,
         },
-        .probe = battery_probe,
-        .remove = battery_remove
 };
 
-static int __init mioa701_battery_init(void)
-{
-        int rc;
-
-        rc = platform_driver_register(&mioa701_battery_driver);
-        if (rc)
-                printk(KERN_ERR "Could not register mioa701 battery driver\n");
-        return rc;
-}
-
-#else
-static int __init mioa701_battery_init(void)
-{
-        return 0;
-}
-#endif
+struct i2c_pxa_platform_data i2c_pdata = {
+        .fast_mode = 1,
+};
 
 /*
  * Mio global
@@ -851,17 +808,17 @@ static void mioa701_machine_exit(void);
 static void mioa701_poweroff(void)
 {
         mioa701_machine_exit();
-        gpio_set_value(GPIO18_POWEROFF, 1);
+        arm_machine_restart('s');
 }
 
 static void mioa701_restart(char c)
 {
         mioa701_machine_exit();
-        arm_machine_restart(c);
+        arm_machine_restart('s');
 }
 
 struct gpio_ress global_gpios[] = {
-        MIO_GPIO_OUT(GPIO9_CHARGE_nEN, 1, "Charger enable"),
+        MIO_GPIO_OUT(GPIO9_CHARGE_EN, 1, "Charger enable"),
         MIO_GPIO_OUT(GPIO18_POWEROFF, 0, "Power Off"),
         MIO_GPIO_OUT(GPIO87_LCD_POWER, 0, "LCD Power")
 };
@@ -879,12 +836,16 @@ static void __init mioa701_machine_init(void)
         set_pxa_fb_info(&mioa701_pxafb_info);
         pxa_set_mci_info(&mioa701_mci_info);
         pxa_set_keypad_info(&mioa701_keypad_info);
+        wm97xx_bat_set_pdata(&mioa701_battery_data);
         udc_init();
         pm_power_off = mioa701_poweroff;
         arm_pm_restart = mioa701_restart;
         platform_add_devices(devices, ARRAY_SIZE(devices));
         gsm_init();
-        mioa701_battery_init();
+
+        pxa_set_i2c_info(&i2c_pdata);
+        pxa_set_camera_info(&mioa701_pxacamera_platform_data);
+        i2c_register_board_info(0, ARRAY_AND_SIZE(mioa701_i2c_devices));
 }
 
 static void mioa701_machine_exit(void)