1 files changed, 49 insertions, 156 deletions

diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c
index 58f3402a0375..b4d00aba0e31 100644
--- a/arch/arm/mach-pxa/littleton.c
+++ b/arch/arm/mach-pxa/littleton.c
@@ -20,6 +20,7 @@
 #include <linux/delay.h>
 #include <linux/platform_device.h>
 #include <linux/clk.h>
+#include <linux/spi/spi.h>
 #include <linux/smc91x.h>
 
 #include <asm/types.h>
@@ -38,6 +39,7 @@
 #include <mach/gpio.h>
 #include <mach/pxafb.h>
 #include <mach/ssp.h>
+#include <mach/pxa2xx_spi.h>
 #include <mach/pxa27x_keypad.h>
 #include <mach/pxa3xx_nand.h>
 #include <mach/littleton.h>
@@ -72,8 +74,8 @@ static mfp_cfg_t littleton_mfp_cfg[] __initdata = {
 
         /* SSP2 */
         GPIO25_SSP2_SCLK,
-        GPIO17_SSP2_FRM,
         GPIO27_SSP2_TXD,
+        GPIO17_GPIO,    /* SFRM as chip-select */
 
         /* Debug Ethernet */
         GPIO90_GPIO,
@@ -123,160 +125,6 @@ static struct platform_device smc91x_device = {
 };
 
 #if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
-/* use bit 30, 31 as the indicator of command parameter number */
-#define CMD0(x)         ((0x00000000) | ((x) << 9))
-#define CMD1(x, x1)     ((0x40000000) | ((x) << 9) | 0x100 | (x1))
-#define CMD2(x, x1, x2) ((0x80000000) | ((x) << 18) | 0x20000 |\
-                         ((x1) << 9) | 0x100 | (x2))
-
-static uint32_t lcd_panel_reset[] = {
-        CMD0(0x1), /* reset */
-        CMD0(0x0), /* nop */
-        CMD0(0x0), /* nop */
-        CMD0(0x0), /* nop */
-};
-
-static uint32_t lcd_panel_on[] = {
-        CMD0(0x29),             /* Display ON */
-        CMD2(0xB8, 0xFF, 0xF9), /* Output Control */
-        CMD0(0x11),             /* Sleep out */
-        CMD1(0xB0, 0x16),       /* Wake */
-};
-
-static uint32_t lcd_panel_off[] = {
-        CMD0(0x28),             /* Display OFF */
-        CMD2(0xB8, 0x80, 0x02), /* Output Control */
-        CMD0(0x10),             /* Sleep in */
-        CMD1(0xB0, 0x00),       /* Deep stand by in */
-};
-
-static uint32_t lcd_vga_pass_through[] = {
-        CMD1(0xB0, 0x16),
-        CMD1(0xBC, 0x80),
-        CMD1(0xE1, 0x00),
-        CMD1(0x36, 0x50),
-        CMD1(0x3B, 0x00),
-};
-
-static uint32_t lcd_qvga_pass_through[] = {
-        CMD1(0xB0, 0x16),
-        CMD1(0xBC, 0x81),
-        CMD1(0xE1, 0x00),
-        CMD1(0x36, 0x50),
-        CMD1(0x3B, 0x22),
-};
-
-static uint32_t lcd_vga_transfer[] = {
-        CMD1(0xcf, 0x02),       /* Blanking period control (1) */
-        CMD2(0xd0, 0x08, 0x04), /* Blanking period control (2) */
-        CMD1(0xd1, 0x01),       /* CKV timing control on/off */
-        CMD2(0xd2, 0x14, 0x00), /* CKV 1,2 timing control */
-        CMD2(0xd3, 0x1a, 0x0f), /* OEV timing control */
-        CMD2(0xd4, 0x1f, 0xaf), /* ASW timing control (1) */
-        CMD1(0xd5, 0x14),       /* ASW timing control (2) */
-        CMD0(0x21),             /* Invert for normally black display */
-        CMD0(0x29),             /* Display on */
-};
-
-static uint32_t lcd_qvga_transfer[] = {
-        CMD1(0xd6, 0x02),       /* Blanking period control (1) */
-        CMD2(0xd7, 0x08, 0x04), /* Blanking period control (2) */
-        CMD1(0xd8, 0x01),       /* CKV timing control on/off */
-        CMD2(0xd9, 0x00, 0x08), /* CKV 1,2 timing control */
-        CMD2(0xde, 0x05, 0x0a), /* OEV timing control */
-        CMD2(0xdf, 0x0a, 0x19), /* ASW timing control (1) */
-        CMD1(0xe0, 0x0a),       /* ASW timing control (2) */
-        CMD0(0x21),             /* Invert for normally black display */
-        CMD0(0x29),             /* Display on */
-};
-
-static uint32_t lcd_panel_config[] = {
-        CMD2(0xb8, 0xff, 0xf9), /* Output control */
-        CMD0(0x11),             /* sleep out */
-        CMD1(0xba, 0x01),       /* Display mode (1) */
-        CMD1(0xbb, 0x00),       /* Display mode (2) */
-        CMD1(0x3a, 0x60),       /* Display mode 18-bit RGB */
-        CMD1(0xbf, 0x10),       /* Drive system change control */
-        CMD1(0xb1, 0x56),       /* Booster operation setup */
-        CMD1(0xb2, 0x33),       /* Booster mode setup */
-        CMD1(0xb3, 0x11),       /* Booster frequency setup */
-        CMD1(0xb4, 0x02),       /* Op amp/system clock */
-        CMD1(0xb5, 0x35),       /* VCS voltage */
-        CMD1(0xb6, 0x40),       /* VCOM voltage */
-        CMD1(0xb7, 0x03),       /* External display signal */
-        CMD1(0xbd, 0x00),       /* ASW slew rate */
-        CMD1(0xbe, 0x00),       /* Dummy data for QuadData operation */
-        CMD1(0xc0, 0x11),       /* Sleep out FR count (A) */
-        CMD1(0xc1, 0x11),       /* Sleep out FR count (B) */
-        CMD1(0xc2, 0x11),       /* Sleep out FR count (C) */
-        CMD2(0xc3, 0x20, 0x40), /* Sleep out FR count (D) */
-        CMD2(0xc4, 0x60, 0xc0), /* Sleep out FR count (E) */
-        CMD2(0xc5, 0x10, 0x20), /* Sleep out FR count (F) */
-        CMD1(0xc6, 0xc0),       /* Sleep out FR count (G) */
-        CMD2(0xc7, 0x33, 0x43), /* Gamma 1 fine tuning (1) */
-        CMD1(0xc8, 0x44),       /* Gamma 1 fine tuning (2) */
-        CMD1(0xc9, 0x33),       /* Gamma 1 inclination adjustment */
-        CMD1(0xca, 0x00),       /* Gamma 1 blue offset adjustment */
-        CMD2(0xec, 0x01, 0xf0), /* Horizontal clock cycles */
-};
-
-static void ssp_reconfig(struct ssp_dev *dev, int nparam)
-{
-        static int last_nparam = -1;
-
-        /* check if it is necessary to re-config SSP */
-        if (nparam == last_nparam)
-                return;
-
-        ssp_disable(dev);
-        ssp_config(dev, (nparam == 2) ? 0x0010058a : 0x00100581, 0x18, 0, 0);
-
-        last_nparam = nparam;
-}
-
-static void ssp_send_cmd(uint32_t *cmd, int num)
-{
-        static int ssp_initialized;
-        static struct ssp_dev ssp2;
-
-        int i;
-
-        if (!ssp_initialized) {
-                ssp_init(&ssp2, 2, SSP_NO_IRQ);
-                ssp_initialized = 1;
-        }
-
-        clk_enable(ssp2.ssp->clk);
-        for (i = 0; i < num; i++, cmd++) {
-                ssp_reconfig(&ssp2, (*cmd >> 30) & 0x3);
-                ssp_write_word(&ssp2, *cmd & 0x3fffffff);
-
-                /* FIXME: ssp_flush() is mandatory here to work */
-                ssp_flush(&ssp2);
-        }
-        clk_disable(ssp2.ssp->clk);
-}
-
-static void littleton_lcd_power(int on, struct fb_var_screeninfo *var)
-{
-        if (on) {
-                ssp_send_cmd(ARRAY_AND_SIZE(lcd_panel_on));
-                ssp_send_cmd(ARRAY_AND_SIZE(lcd_panel_reset));
-                if (var->xres > 240) {
-                        /* VGA */
-                        ssp_send_cmd(ARRAY_AND_SIZE(lcd_vga_pass_through));
-                        ssp_send_cmd(ARRAY_AND_SIZE(lcd_panel_config));
-                        ssp_send_cmd(ARRAY_AND_SIZE(lcd_vga_transfer));
-                } else {
-                        /* QVGA */
-                        ssp_send_cmd(ARRAY_AND_SIZE(lcd_qvga_pass_through));
-                        ssp_send_cmd(ARRAY_AND_SIZE(lcd_panel_config));
-                        ssp_send_cmd(ARRAY_AND_SIZE(lcd_qvga_transfer));
-                }
-        } else
-                ssp_send_cmd(ARRAY_AND_SIZE(lcd_panel_off));
-}
-
 static struct pxafb_mode_info tpo_tdo24mtea1_modes[] = {
         [0] = {
                 /* VGA */
@@ -312,7 +160,6 @@ static struct pxafb_mach_info littleton_lcd_info = {
         .modes                  = tpo_tdo24mtea1_modes,
         .num_modes              = 2,
         .lcd_conn               = LCD_COLOR_TFT_16BPP,
-        .pxafb_lcd_power        = littleton_lcd_power,
 };
 
 static void littleton_init_lcd(void)
@@ -323,6 +170,51 @@ static void littleton_init_lcd(void)
 static inline void littleton_init_lcd(void) {};
 #endif /* CONFIG_FB_PXA || CONFIG_FB_PXA_MODULE */
 
+#if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE)
+static struct pxa2xx_spi_master littleton_spi_info = {
+        .num_chipselect         = 1,
+};
+
+static void littleton_tdo24m_cs(u32 cmd)
+{
+        gpio_set_value(LITTLETON_GPIO_LCD_CS, !(cmd == PXA2XX_CS_ASSERT));
+}
+
+static struct pxa2xx_spi_chip littleton_tdo24m_chip = {
+        .rx_threshold   = 1,
+        .tx_threshold   = 1,
+        .cs_control     = littleton_tdo24m_cs,
+};
+
+static struct spi_board_info littleton_spi_devices[] __initdata = {
+        {
+                .modalias       = "tdo24m",
+                .max_speed_hz   = 1000000,
+                .bus_num        = 2,
+                .chip_select    = 0,
+                .controller_data= &littleton_tdo24m_chip,
+        },
+};
+
+static void __init littleton_init_spi(void)
+{
+        int err;
+
+        err = gpio_request(LITTLETON_GPIO_LCD_CS, "LCD_CS");
+        if (err) {
+                pr_warning("failed to request GPIO for LCS CS\n");
+                return;
+        }
+
+        gpio_direction_output(LITTLETON_GPIO_LCD_CS, 1);
+
+        pxa2xx_set_spi_info(2, &littleton_spi_info);
+        spi_register_board_info(ARRAY_AND_SIZE(littleton_spi_devices));
+}
+#else
+static inline void littleton_init_spi(void) {}
+#endif
+
 #if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
 static unsigned int littleton_matrix_key_map[] = {
         /* KEY(row, col, key_code) */
@@ -433,6 +325,7 @@ static void __init littleton_init(void)
          */
         platform_device_register(&smc91x_device);
 
+        littleton_init_spi();
         littleton_init_lcd();
         littleton_init_keypad();
         littleton_init_nand();