1 files changed, 111 insertions, 0 deletions

diff --git a/arch/arm/mach-pxa/colibri-pxa270-evalboard.c b/arch/arm/mach-pxa/colibri-pxa270-evalboard.c
new file mode 100644
index 000000000000..0f3b632c3b14
--- /dev/null
+++ b/arch/arm/mach-pxa/colibri-pxa270-evalboard.c
@@ -0,0 +1,111 @@
+/*
+ *  linux/arch/arm/mach-pxa/colibri-pxa270-evalboard.c
+ *
+ *  Support for Toradex PXA270 based Colibri Evaluation Carrier Board
+ *  Daniel Mack <daniel@caiaq.de>
+ *  Marek Vasut <marek.vasut@gmail.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/sysdev.h>
+#include <linux/interrupt.h>
+#include <linux/gpio.h>
+#include <asm/mach-types.h>
+#include <mach/hardware.h>
+#include <asm/mach/arch.h>
+
+#include <mach/pxa27x.h>
+#include <mach/colibri.h>
+#include <mach/mmc.h>
+#include <mach/ohci.h>
+#include <mach/pxa27x-udc.h>
+
+#include "generic.h"
+#include "devices.h"
+
+/******************************************************************************
+ * Pin configuration
+ ******************************************************************************/
+static mfp_cfg_t colibri_pxa270_evalboard_pin_config[] __initdata = {
+        /* MMC */
+        GPIO32_MMC_CLK,
+        GPIO92_MMC_DAT_0,
+        GPIO109_MMC_DAT_1,
+        GPIO110_MMC_DAT_2,
+        GPIO111_MMC_DAT_3,
+        GPIO112_MMC_CMD,
+        GPIO0_GPIO,     /* SD detect */
+
+        /* FFUART */
+        GPIO39_FFUART_TXD,
+        GPIO34_FFUART_RXD,
+
+        /* UHC */
+        GPIO88_USBH1_PWR,
+        GPIO89_USBH1_PEN,
+        GPIO119_USBH2_PWR,
+        GPIO120_USBH2_PEN,
+};
+
+/******************************************************************************
+ * SD/MMC card controller
+ ******************************************************************************/
+#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
+static struct pxamci_platform_data colibri_pxa270_mci_platform_data = {
+        .ocr_mask               = MMC_VDD_32_33 | MMC_VDD_33_34,
+        .gpio_power             = -1,
+        .gpio_card_detect       = GPIO0_COLIBRI_PXA270_SD_DETECT,
+        .gpio_card_ro           = -1,
+        .detect_delay_ms        = 200,
+};
+
+static void __init colibri_pxa270_mmc_init(void)
+{
+        pxa_set_mci_info(&colibri_pxa270_mci_platform_data);
+}
+#else
+static inline void colibri_pxa270_mmc_init(void) {}
+#endif
+
+/******************************************************************************
+ * USB Host
+ ******************************************************************************/
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+static int colibri_pxa270_ohci_init(struct device *dev)
+{
+        UP2OCR = UP2OCR_HXS | UP2OCR_HXOE | UP2OCR_DPPDE | UP2OCR_DMPDE;
+        return 0;
+}
+
+static struct pxaohci_platform_data colibri_pxa270_ohci_info = {
+        .port_mode      = PMM_PERPORT_MODE,
+        .flags          = ENABLE_PORT1 | ENABLE_PORT2 |
+                          POWER_CONTROL_LOW | POWER_SENSE_LOW,
+        .init           = colibri_pxa270_ohci_init,
+};
+
+static void __init colibri_pxa270_uhc_init(void)
+{
+        pxa_set_ohci_info(&colibri_pxa270_ohci_info);
+}
+#else
+static inline void colibri_pxa270_uhc_init(void) {}
+#endif
+
+void __init colibri_pxa270_evalboard_init(void)
+{
+        pxa2xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa270_evalboard_pin_config));
+        pxa_set_ffuart_info(NULL);
+        pxa_set_btuart_info(NULL);
+        pxa_set_stuart_info(NULL);
+
+        colibri_pxa270_mmc_init();
+        colibri_pxa270_uhc_init();
+}
+