1 files changed, 282 insertions, 276 deletions

diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index 28f0260777a3..e62572dc2d71 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -31,216 +31,144 @@ endmenu
 
 endif
 
-config ARCH_GUMSTIX
-        bool "Gumstix XScale 255 boards"
-        select PXA25x
-        help
-          Say Y here if you intend to run this kernel on
-          Basix, Connex, ws-200ax, ws-400ax systems
-
-choice
-        prompt "Gumstix Carrier/Expansion Board"
-        depends on ARCH_GUMSTIX
-
-config GUMSTIX_AM200EPD
-        bool "Enable AM200EPD board support"
-
-config GUMSTIX_AM300EPD
-        bool "Enable AM300EPD board support"
-
-endchoice
-
-config MACH_INTELMOTE2
-        bool "Intel Mote 2 Platform"
-        select PXA27x
-        select IWMMXT
-        select PXA_HAVE_BOARD_IRQS
-
-config MACH_STARGATE2
-        bool "Intel Stargate 2 Platform"
-        select PXA27x
-        select IWMMXT
-        select PXA_HAVE_BOARD_IRQS
+comment "Intel/Marvell Dev Platforms (sorted by hardware release time)"
 
 config ARCH_LUBBOCK
-        bool "Intel DBPXA250 Development Platform"
+        bool "Intel DBPXA250 Development Platform (aka Lubbock)"
         select PXA25x
         select SA1111
         select PXA_HAVE_BOARD_IRQS
 
-config MACH_LOGICPD_PXA270
-        bool "LogicPD PXA270 Card Engine Development Platform"
+config MACH_MAINSTONE
+        bool "Intel HCDDBBVA0 Development Platform (aka Mainstone)"
         select PXA27x
         select HAVE_PWM
         select PXA_HAVE_BOARD_IRQS
 
-config MACH_MAINSTONE
-        bool "Intel HCDDBBVA0 Development Platform"
-        select PXA27x
+config MACH_ZYLONITE
+        bool "PXA3xx Development Platform (aka Zylonite)"
+        select PXA3xx
+        select PXA_SSP
         select HAVE_PWM
         select PXA_HAVE_BOARD_IRQS
 
-config MACH_MP900C
-        bool "Nec Mobilepro 900/c"
+config MACH_LITTLETON
+        bool "PXA3xx Form Factor Platform (aka Littleton)"
+        select PXA3xx
+        select PXA_SSP
+
+config MACH_TAVOREVB
+        bool "PXA930 Evaluation Board (aka TavorEVB)"
+        select PXA3xx
+        select CPU_PXA930
+
+config MACH_SAAR
+        bool "PXA930 Handheld Platform (aka SAAR)"
+        select PXA3xx
+        select CPU_PXA930
+
+comment "Third Party Dev Platforms (sorted by vendor name)"
+
+config ARCH_PXA_IDP
+        bool "Accelent Xscale IDP"
         select PXA25x
 
+config ARCH_VIPER
+        bool "Arcom/Eurotech VIPER SBC"
+        select PXA25x
+        select ISA
+        select I2C_GPIO
+        select HAVE_PWM
+        select PXA_HAVE_BOARD_IRQS
+        select PXA_HAVE_ISA_IRQS
+
 config MACH_BALLOON3
         bool "Balloon 3 board"
         select PXA27x
         select IWMMXT
         select PXA_HAVE_BOARD_IRQS
 
-config ARCH_PXA_IDP
-        bool "Accelent Xscale IDP"
-        select PXA25x
-
-config PXA_SHARPSL
-        bool "SHARP Zaurus SL-5600, SL-C7xx and SL-Cxx00 Models"
-        select SHARP_SCOOP
-        select SHARP_PARAM
+config MACH_CSB726
+        bool "Enable Cogent CSB726 System On a Module"
+        select PXA27x
+        select IWMMXT
         help
-          Say Y here if you intend to run this kernel on a
-          Sharp Zaurus SL-5600 (Poodle), SL-C700 (Corgi),
-          SL-C750 (Shepherd), SL-C760 (Husky), SL-C1000 (Akita),
-          SL-C3000 (Spitz), SL-C3100 (Borzoi) or SL-C6000x (Tosa)
-          handheld computer.
-
-config SHARPSL_PM
-        bool
-        select APM_EMULATION
+          Say Y here if you intend to run this kernel on a Cogent
+          CSB726 System On Module.
 
-config CORGI_SSP_DEPRECATED
-        bool
-        select PXA_SSP
-        help
-          This option will include corgi_ssp.c and corgi_lcd.c
-          that corgi_ts.c and other legacy drivers (corgi_bl.c
-          and sharpsl_pm.c) may depend on.
+config CSB726_CSB701
+        bool "Enable support for CSB701 baseboard"
+        depends on MACH_CSB726
 
-config MACH_POODLE
-        bool "Enable Sharp SL-5600 (Poodle) Support"
-        depends on PXA_SHARPSL
+config MACH_ARMCORE
+        bool "CompuLab CM-X255/CM-X270 modules"
+        select PXA27x
+        select IWMMXT
         select PXA25x
-        select SHARP_LOCOMO
         select PXA_SSP
 
-config MACH_CORGI
-        bool "Enable Sharp SL-C700 (Corgi) Support"
-        depends on PXA_SHARPSL
-        select PXA25x
-        select PXA_SHARP_C7xx
-
-config MACH_SHEPHERD
-        bool "Enable Sharp SL-C750 (Shepherd) Support"
-        depends on PXA_SHARPSL
-        select PXA25x
-        select PXA_SHARP_C7xx
-
-config MACH_HUSKY
-        bool "Enable Sharp SL-C760 (Husky) Support"
-        depends on PXA_SHARPSL
-        select PXA25x
-        select PXA_SHARP_C7xx
-
-config MACH_AKITA
-        bool "Enable Sharp SL-1000 (Akita) Support"
-        depends on PXA_SHARPSL
-        select PXA27x
-        select PXA_SHARP_Cxx00
-        select MACH_SPITZ
-        select I2C
-        select I2C_PXA
-
-config MACH_SPITZ
-        bool "Enable Sharp Zaurus SL-3000 (Spitz) Support"
-        depends on PXA_SHARPSL
+config MACH_EM_X270
+        bool "CompuLab EM-x270 platform"
         select PXA27x
-        select PXA_SHARP_Cxx00
 
-config MACH_BORZOI
-        bool "Enable Sharp Zaurus SL-3100 (Borzoi) Support"
-        depends on PXA_SHARPSL
+config MACH_EXEDA
+        bool "CompuLab eXeda platform"
         select PXA27x
-        select PXA_SHARP_Cxx00
 
-config MACH_TOSA
-        bool "Enable Sharp SL-6000x (Tosa) Support"
-        depends on PXA_SHARPSL
-        select PXA25x
-        select PXA_HAVE_BOARD_IRQS
+config MACH_CM_X300
+        bool "CompuLab CM-X300 modules"
+        select PXA3xx
+        select CPU_PXA300
 
-config ARCH_VIPER
-        bool "Arcom/Eurotech VIPER SBC"
+config ARCH_GUMSTIX
+        bool "Gumstix XScale 255 boards"
         select PXA25x
-        select ISA
-        select I2C_GPIO
-        select HAVE_PWM
-        select PXA_HAVE_BOARD_IRQS
-        select PXA_HAVE_ISA_IRQS
+        help
+          Say Y here if you intend to run this kernel on
+          Basix, Connex, ws-200ax, ws-400ax systems
 
-config ARCH_PXA_ESERIES
-        bool "PXA based Toshiba e-series PDAs"
-        select PXA25x
-        select PXA_HAVE_BOARD_IRQS
+choice
+        prompt "Gumstix Carrier/Expansion Board"
+        depends on ARCH_GUMSTIX
 
-config MACH_E330
-        bool "Toshiba e330"
-        default y
-        depends on ARCH_PXA_ESERIES
-        help
-          Say Y here if you intend to run this kernel on a Toshiba
-          e330 family PDA.
+config GUMSTIX_AM200EPD
+        bool "Enable AM200EPD board support"
 
-config MACH_E350
-        bool "Toshiba e350"
-        default y
-        depends on ARCH_PXA_ESERIES
-        help
-          Say Y here if you intend to run this kernel on a Toshiba
-          e350 family PDA.
+config GUMSTIX_AM300EPD
+        bool "Enable AM300EPD board support"
 
-config MACH_E740
-        bool "Toshiba e740"
-        default y
-        depends on ARCH_PXA_ESERIES
-        select FB_W100
-        help
-          Say Y here if you intend to run this kernel on a Toshiba
-          e740 family PDA.
+endchoice
 
-config MACH_E750
-        bool "Toshiba e750"
-        default y
-        depends on ARCH_PXA_ESERIES
-        select FB_W100
-        help
-          Say Y here if you intend to run this kernel on a Toshiba
-          e750 family PDA.
+config MACH_INTELMOTE2
+        bool "Intel Mote 2 Platform"
+        select PXA27x
+        select IWMMXT
+        select PXA_HAVE_BOARD_IRQS
 
-config MACH_E400
-        bool "Toshiba e400"
-        default y
-        depends on ARCH_PXA_ESERIES
-        help
-          Say Y here if you intend to run this kernel on a Toshiba
-          e400 family PDA.
+config MACH_STARGATE2
+        bool "Intel Stargate 2 Platform"
+        select PXA27x
+        select IWMMXT
+        select PXA_HAVE_BOARD_IRQS
 
-config MACH_E800
-        bool "Toshiba e800"
-        default y
-        depends on ARCH_PXA_ESERIES
-        select FB_W100
+config MACH_XCEP
+        bool "Iskratel Electronics XCEP"
+        select PXA25x
+        select MTD
+        select MTD_PARTITIONS
+        select MTD_PHYSMAP
+        select MTD_CFI_INTELEXT
+        select MTD_CFI
+        select MTD_CHAR
+        select SMC91X
+        select PXA_SSP
         help
-          Say Y here if you intend to run this kernel on a Toshiba
-          e800 family PDA.
+          PXA255 based Single Board Computer with SMC 91C111 ethernet chip and 64 MB of flash.
+          Tuned for usage in Libera instruments for particle accelerators.
 
 config TRIZEPS_PXA
         bool "PXA based Keith und Koep Trizeps DIMM-Modules"
 
-config MACH_H5000
-        bool "HP iPAQ h5000"
-        select PXA25x
-
 config MACH_TRIZEPS4
         bool "Keith und Koep Trizeps4 DIMM-Module"
         depends on TRIZEPS_PXA
@@ -274,13 +202,38 @@ config TRIZEPS_PCMCIA
         help
           Enable PCMCIA support for Trizeps modules
 
-config MACH_EM_X270
-        bool "CompuLab EM-x270 platform"
+config MACH_LOGICPD_PXA270
+        bool "LogicPD PXA270 Card Engine Development Platform"
         select PXA27x
+        select HAVE_PWM
+        select PXA_HAVE_BOARD_IRQS
 
-config MACH_EXEDA
-        bool "CompuLab eXeda platform"
+config MACH_PCM027
+        bool "Phytec phyCORE-PXA270 CPU module (PCM-027)"
         select PXA27x
+        select IWMMXT
+        select PXA_SSP
+        select PXA_HAVE_BOARD_IRQS
+
+config MACH_PCM990_BASEBOARD
+        bool "PHYTEC PCM-990 development board"
+        select HAVE_PWM
+        depends on MACH_PCM027
+
+choice
+        prompt "display on pcm990"
+        depends on MACH_PCM990_BASEBOARD
+
+config PCM990_DISPLAY_SHARP
+        bool "sharp lq084v1dg21 stn display"
+
+config PCM990_DISPLAY_NEC
+        bool "nec nl6448bc20_18d tft display"
+
+config PCM990_DISPLAY_NONE
+        bool "no display"
+
+endchoice
 
 config MACH_COLIBRI
         bool "Toradex Colibri PXA270"
@@ -296,39 +249,7 @@ config MACH_COLIBRI320
         select PXA3xx
         select CPU_PXA320
 
-config MACH_ZYLONITE
-        bool "PXA3xx Development Platform (aka Zylonite)"
-        select PXA3xx
-        select PXA_SSP
-        select HAVE_PWM
-        select PXA_HAVE_BOARD_IRQS
-
-config MACH_LITTLETON
-        bool "PXA3xx Form Factor Platform (aka Littleton)"
-        select PXA3xx
-        select PXA_SSP
-
-config MACH_TAVOREVB
-        bool "PXA930 Evaluation Board (aka TavorEVB)"
-        select PXA3xx
-        select CPU_PXA930
-
-config MACH_SAAR
-        bool "PXA930 Handheld Platform (aka SAAR)"
-        select PXA3xx
-        select CPU_PXA930
-
-config MACH_ARMCORE
-        bool "CompuLab CM-X255/CM-X270 modules"
-        select PXA27x
-        select IWMMXT
-        select PXA25x
-        select PXA_SSP
-
-config MACH_CM_X300
-        bool "CompuLab CM-X300 modules"
-        select PXA3xx
-        select CPU_PXA300
+comment "End-user Products (sorted by vendor name)"
 
 config MACH_H4700
         bool "HP iPAQ hx4700"
@@ -338,6 +259,15 @@ config MACH_H4700
         select HAVE_PWM
         select PXA_HAVE_BOARD_IRQS
 
+config MACH_H5000
+        bool "HP iPAQ h5000"
+        select PXA25x
+
+config MACH_HIMALAYA
+        bool "HTC Himalaya Support"
+        select CPU_PXA26x
+        select FB_W100
+
 config MACH_MAGICIAN
         bool "Enable HTC Magician Support"
         select PXA27x
@@ -346,11 +276,6 @@ config MACH_MAGICIAN
         select HAVE_PWM
         select PXA_HAVE_BOARD_IRQS
 
-config MACH_HIMALAYA
-        bool "HTC Himalaya Support"
-        select CPU_PXA26x
-        select FB_W100
-
 config MACH_MIOA701
         bool "Mitac Mio A701 Support"
         select PXA27x
@@ -362,13 +287,47 @@ config MACH_MIOA701
           MIO A701. Currently there is only basic support
           for this PDA.
 
-config MACH_PCM027
-        bool "Phytec phyCORE-PXA270 CPU module (PCM-027)"
+config PXA_EZX
+        bool "Motorola EZX Platform"
         select PXA27x
         select IWMMXT
-        select PXA_SSP
+        select HAVE_PWM
         select PXA_HAVE_BOARD_IRQS
 
+config MACH_EZX_A780
+        bool "Motorola EZX A780"
+        default y
+        depends on PXA_EZX
+
+config MACH_EZX_E680
+        bool "Motorola EZX E680"
+        default y
+        depends on PXA_EZX
+
+config MACH_EZX_A1200
+        bool "Motorola EZX A1200"
+        default y
+        depends on PXA_EZX
+
+config MACH_EZX_A910
+        bool "Motorola EZX A910"
+        default y
+        depends on PXA_EZX
+
+config MACH_EZX_E6
+        bool "Motorola EZX E6"
+        default y
+        depends on PXA_EZX
+
+config MACH_EZX_E2
+        bool "Motorola EZX E2"
+        default y
+        depends on PXA_EZX
+
+config MACH_MP900C
+        bool "Nec Mobilepro 900/c"
+        select PXA25x
+
 config ARCH_PXA_PALM
         bool "PXA based Palm PDAs"
         select HAVE_PWM
@@ -421,6 +380,16 @@ config MACH_PALMZ72
           Say Y here if you intend to run this kernel on Palm Zire 72
           handheld computer.
 
+config MACH_PALMLD
+        bool "Palm LifeDrive"
+        default y
+        depends on ARCH_PXA_PALM
+        select PXA27x
+        select IWMMXT
+        help
+          Say Y here if you intend to run this kernel on a Palm LifeDrive
+          handheld computer.
+
 config PALM_TREO
         bool
         depends on ARCH_PXA_PALM
@@ -447,99 +416,136 @@ config MACH_TREO680
           Say Y here if you intend to run this kernel on Palm Treo 680
           smartphone.
 
-config MACH_PALMLD
-        bool "Palm LifeDrive"
-        default y
-        depends on ARCH_PXA_PALM
-        select PXA27x
-        select IWMMXT
+config PXA_SHARPSL
+        bool "SHARP Zaurus SL-5600, SL-C7xx and SL-Cxx00 Models"
+        select SHARP_SCOOP
+        select SHARP_PARAM
         help
-          Say Y here if you intend to run this kernel on a Palm LifeDrive
+          Say Y here if you intend to run this kernel on a
+          Sharp Zaurus SL-5600 (Poodle), SL-C700 (Corgi),
+          SL-C750 (Shepherd), SL-C760 (Husky), SL-C1000 (Akita),
+          SL-C3000 (Spitz), SL-C3100 (Borzoi) or SL-C6000x (Tosa)
           handheld computer.
 
-config MACH_PCM990_BASEBOARD
-        bool "PHYTEC PCM-990 development board"
-        select HAVE_PWM
-        depends on MACH_PCM027
+config SHARPSL_PM
+        bool
+        select APM_EMULATION
 
-choice
-        prompt "display on pcm990"
-        depends on MACH_PCM990_BASEBOARD
+config CORGI_SSP_DEPRECATED
+        bool
+        select PXA_SSP
+        help
+          This option will include corgi_ssp.c and corgi_lcd.c
+          that corgi_ts.c and other legacy drivers (corgi_bl.c
+          and sharpsl_pm.c) may depend on.
 
-config PCM990_DISPLAY_SHARP
-        bool "sharp lq084v1dg21 stn display"
+config MACH_POODLE
+        bool "Enable Sharp SL-5600 (Poodle) Support"
+        depends on PXA_SHARPSL
+        select PXA25x
+        select SHARP_LOCOMO
+        select PXA_SSP
 
-config PCM990_DISPLAY_NEC
-        bool "nec nl6448bc20_18d tft display"
+config MACH_CORGI
+        bool "Enable Sharp SL-C700 (Corgi) Support"
+        depends on PXA_SHARPSL
+        select PXA25x
+        select PXA_SHARP_C7xx
 
-config PCM990_DISPLAY_NONE
-        bool "no display"
+config MACH_SHEPHERD
+        bool "Enable Sharp SL-C750 (Shepherd) Support"
+        depends on PXA_SHARPSL
+        select PXA25x
+        select PXA_SHARP_C7xx
 
-endchoice
+config MACH_HUSKY
+        bool "Enable Sharp SL-C760 (Husky) Support"
+        depends on PXA_SHARPSL
+        select PXA25x
+        select PXA_SHARP_C7xx
 
-config MACH_CSB726
-        bool "Enable Cogent CSB726 System On a Module"
+config MACH_AKITA
+        bool "Enable Sharp SL-1000 (Akita) Support"
+        depends on PXA_SHARPSL
         select PXA27x
-        select IWMMXT
-        help
-          Say Y here if you intend to run this kernel on a Cogent
-          CSB726 System On Module.
+        select PXA_SHARP_Cxx00
+        select MACH_SPITZ
+        select I2C
+        select I2C_PXA
 
-config CSB726_CSB701
-        bool "Enable supprot for CSB701 baseboard"
-        depends on MACH_CSB726
+config MACH_SPITZ
+        bool "Enable Sharp Zaurus SL-3000 (Spitz) Support"
+        depends on PXA_SHARPSL
+        select PXA27x
+        select PXA_SHARP_Cxx00
 
-config PXA_EZX
-        bool "Motorola EZX Platform"
+config MACH_BORZOI
+        bool "Enable Sharp Zaurus SL-3100 (Borzoi) Support"
+        depends on PXA_SHARPSL
         select PXA27x
-        select IWMMXT
-        select HAVE_PWM
+        select PXA_SHARP_Cxx00
+
+config MACH_TOSA
+        bool "Enable Sharp SL-6000x (Tosa) Support"
+        depends on PXA_SHARPSL
+        select PXA25x
         select PXA_HAVE_BOARD_IRQS
 
-config MACH_EZX_A780
-        bool "Motorola EZX A780"
-        default y
-        depends on PXA_EZX
+config ARCH_PXA_ESERIES
+        bool "PXA based Toshiba e-series PDAs"
+        select PXA25x
+        select PXA_HAVE_BOARD_IRQS
 
-config MACH_EZX_E680
-        bool "Motorola EZX E680"
+config MACH_E330
+        bool "Toshiba e330"
         default y
-        depends on PXA_EZX
+        depends on ARCH_PXA_ESERIES
+        help
+          Say Y here if you intend to run this kernel on a Toshiba
+          e330 family PDA.
 
-config MACH_EZX_A1200
-        bool "Motorola EZX A1200"
+config MACH_E350
+        bool "Toshiba e350"
         default y
-        depends on PXA_EZX
+        depends on ARCH_PXA_ESERIES
+        help
+          Say Y here if you intend to run this kernel on a Toshiba
+          e350 family PDA.
 
-config MACH_EZX_A910
-        bool "Motorola EZX A910"
+config MACH_E740
+        bool "Toshiba e740"
         default y
-        depends on PXA_EZX
+        depends on ARCH_PXA_ESERIES
+        select FB_W100
+        help
+          Say Y here if you intend to run this kernel on a Toshiba
+          e740 family PDA.
 
-config MACH_EZX_E6
-        bool "Motorola EZX E6"
+config MACH_E750
+        bool "Toshiba e750"
         default y
-        depends on PXA_EZX
+        depends on ARCH_PXA_ESERIES
+        select FB_W100
+        help
+          Say Y here if you intend to run this kernel on a Toshiba
+          e750 family PDA.
 
-config MACH_EZX_E2
-        bool "Motorola EZX E2"
+config MACH_E400
+        bool "Toshiba e400"
         default y
-        depends on PXA_EZX
+        depends on ARCH_PXA_ESERIES
+        help
+          Say Y here if you intend to run this kernel on a Toshiba
+          e400 family PDA.
 
-config MACH_XCEP
-        bool "Iskratel Electronics XCEP"
-        select PXA25x
-        select MTD
-        select MTD_PARTITIONS
-        select MTD_PHYSMAP
-        select MTD_CFI_INTELEXT
-        select MTD_CFI
-        select MTD_CHAR
-        select SMC91X
-        select PXA_SSP
+config MACH_E800
+        bool "Toshiba e800"
+        default y
+        depends on ARCH_PXA_ESERIES
+        select FB_W100
         help
-          PXA255 based Single Board Computer with SMC 91C111 ethernet chip and 64 MB of flash.
-          Tuned for usage in Libera instruments for particle accelerators.
+          Say Y here if you intend to run this kernel on a Toshiba
+          e800 family PDA.
 
 endmenu