6 files changed, 67 insertions, 176 deletions

diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
index 983f44b78777..e7dc057600d5 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -97,13 +97,6 @@ static struct mtd_partition devkit8000_nand_partitions[] = {
         },
 };
 
-static struct omap_nand_platform_data devkit8000_nand_data = {
-        .options        = NAND_BUSWIDTH_16,
-        .parts          = devkit8000_nand_partitions,
-        .nr_parts       = ARRAY_SIZE(devkit8000_nand_partitions),
-        .dma_channel    = -1,           /* disable DMA in OMAP NAND driver */
-};
-
 static struct omap2_hsmmc_info mmc[] = {
         {
                 .mmc            = 1,
@@ -516,39 +509,6 @@ static struct platform_device *devkit8000_devices[] __initdata = {
         &omap_dm9000_dev,
 };
 
-static void __init devkit8000_flash_init(void)
-{
-        u8 cs = 0;
-        u8 nandcs = GPMC_CS_NUM + 1;
-
-        /* find out the chip-select on which NAND exists */
-        while (cs < GPMC_CS_NUM) {
-                u32 ret = 0;
-                ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1);
-
-                if ((ret & 0xC00) == 0x800) {
-                        printk(KERN_INFO "Found NAND on CS%d\n", cs);
-                        if (nandcs > GPMC_CS_NUM)
-                                nandcs = cs;
-                }
-                cs++;
-        }
-
-        if (nandcs > GPMC_CS_NUM) {
-                printk(KERN_INFO "NAND: Unable to find configuration "
-                                 "in GPMC\n ");
-                return;
-        }
-
-        if (nandcs < GPMC_CS_NUM) {
-                devkit8000_nand_data.cs = nandcs;
-
-                printk(KERN_INFO "Registering NAND on CS%d\n", nandcs);
-                if (gpmc_nand_init(&devkit8000_nand_data) < 0)
-                        printk(KERN_ERR "Unable to register NAND device\n");
-        }
-}
-
 static struct omap_musb_board_data musb_board_data = {
         .interface_type         = MUSB_INTERFACE_ULPI,
         .mode                   = MUSB_OTG,
@@ -740,7 +700,8 @@ static void __init devkit8000_init(void)
 
         usb_musb_init(&musb_board_data);
         usbhs_init(&usbhs_bdata);
-        devkit8000_flash_init();
+        omap_nand_flash_init(NAND_BUSWIDTH_16, devkit8000_nand_partitions,
+                             ARRAY_SIZE(devkit8000_nand_partitions));
 
         /* Ensure SDRC pins are mux'd for self-refresh */
         omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 13a16649d42c..ce3bc2d1164c 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -174,15 +174,6 @@ static struct mtd_partition omap3beagle_nand_partitions[] = {
         },
 };
 
-static struct omap_nand_platform_data omap3beagle_nand_data = {
-        .options        = NAND_BUSWIDTH_16,
-        .parts          = omap3beagle_nand_partitions,
-        .nr_parts       = ARRAY_SIZE(omap3beagle_nand_partitions),
-        .dma_channel    = -1,           /* disable DMA in OMAP NAND driver */
-        .nand_setup     = NULL,
-        .dev_ready      = NULL,
-};
-
 /* DSS */
 
 static int beagle_enable_dvi(struct omap_dss_device *dssdev)
@@ -542,39 +533,6 @@ static struct platform_device *omap3_beagle_devices[] __initdata = {
         &keys_gpio,
 };
 
-static void __init omap3beagle_flash_init(void)
-{
-        u8 cs = 0;
-        u8 nandcs = GPMC_CS_NUM + 1;
-
-        /* find out the chip-select on which NAND exists */
-        while (cs < GPMC_CS_NUM) {
-                u32 ret = 0;
-                ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1);
-
-                if ((ret & 0xC00) == 0x800) {
-                        printk(KERN_INFO "Found NAND on CS%d\n", cs);
-                        if (nandcs > GPMC_CS_NUM)
-                                nandcs = cs;
-                }
-                cs++;
-        }
-
-        if (nandcs > GPMC_CS_NUM) {
-                printk(KERN_INFO "NAND: Unable to find configuration "
-                                 "in GPMC\n ");
-                return;
-        }
-
-        if (nandcs < GPMC_CS_NUM) {
-                omap3beagle_nand_data.cs = nandcs;
-
-                printk(KERN_INFO "Registering NAND on CS%d\n", nandcs);
-                if (gpmc_nand_init(&omap3beagle_nand_data) < 0)
-                        printk(KERN_ERR "Unable to register NAND device\n");
-        }
-}
-
 static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
 
         .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
@@ -662,7 +620,8 @@ static void __init omap3_beagle_init(void)
 
         usb_musb_init(&musb_board_data);
         usbhs_init(&usbhs_bdata);
-        omap3beagle_flash_init();
+        omap_nand_flash_init(NAND_BUSWIDTH_16, omap3beagle_nand_partitions,
+                             ARRAY_SIZE(omap3beagle_nand_partitions));
 
         /* Ensure SDRC pins are mux'd for self-refresh */
         omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c
index 0a9b3299427a..d770802900b2 100644
--- a/arch/arm/mach-omap2/board-omap3touchbook.c
+++ b/arch/arm/mach-omap2/board-omap3touchbook.c
@@ -96,15 +96,6 @@ static struct mtd_partition omap3touchbook_nand_partitions[] = {
         },
 };
 
-static struct omap_nand_platform_data omap3touchbook_nand_data = {
-        .options        = NAND_BUSWIDTH_16,
-        .parts          = omap3touchbook_nand_partitions,
-        .nr_parts       = ARRAY_SIZE(omap3touchbook_nand_partitions),
-        .dma_channel    = -1,           /* disable DMA in OMAP NAND driver */
-        .nand_setup     = NULL,
-        .dev_ready      = NULL,
-};
-
 #include "sdram-micron-mt46h32m32lf-6.h"
 
 static struct omap2_hsmmc_info mmc[] = {
@@ -396,39 +387,6 @@ static struct platform_device *omap3_touchbook_devices[] __initdata = {
         &keys_gpio,
 };
 
-static void __init omap3touchbook_flash_init(void)
-{
-        u8 cs = 0;
-        u8 nandcs = GPMC_CS_NUM + 1;
-
-        /* find out the chip-select on which NAND exists */
-        while (cs < GPMC_CS_NUM) {
-                u32 ret = 0;
-                ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1);
-
-                if ((ret & 0xC00) == 0x800) {
-                        printk(KERN_INFO "Found NAND on CS%d\n", cs);
-                        if (nandcs > GPMC_CS_NUM)
-                                nandcs = cs;
-                }
-                cs++;
-        }
-
-        if (nandcs > GPMC_CS_NUM) {
-                printk(KERN_INFO "NAND: Unable to find configuration "
-                                 "in GPMC\n ");
-                return;
-        }
-
-        if (nandcs < GPMC_CS_NUM) {
-                omap3touchbook_nand_data.cs = nandcs;
-
-                printk(KERN_INFO "Registering NAND on CS%d\n", nandcs);
-                if (gpmc_nand_init(&omap3touchbook_nand_data) < 0)
-                        printk(KERN_ERR "Unable to register NAND device\n");
-        }
-}
-
 static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
 
         .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
@@ -491,7 +449,8 @@ static void __init omap3_touchbook_init(void)
         omap_ads7846_init(4, OMAP3_TS_GPIO, 310, &ads7846_pdata);
         usb_musb_init(&musb_board_data);
         usbhs_init(&usbhs_bdata);
-        omap3touchbook_flash_init();
+        omap_nand_flash_init(NAND_BUSWIDTH_16, omap3touchbook_nand_partitions,
+                             ARRAY_SIZE(omap3touchbook_nand_partitions));
 
         /* Ensure SDRC pins are mux'd for self-refresh */
         omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index 809d3944f549..7ad2d7fea8d8 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -304,45 +304,6 @@ static struct mtd_partition overo_nand_partitions[] = {
         },
 };
 
-static struct omap_nand_platform_data overo_nand_data = {
-        .parts = overo_nand_partitions,
-        .nr_parts = ARRAY_SIZE(overo_nand_partitions),
-        .dma_channel = -1,      /* disable DMA in OMAP NAND driver */
-};
-
-static void __init overo_flash_init(void)
-{
-        u8 cs = 0;
-        u8 nandcs = GPMC_CS_NUM + 1;
-
-        /* find out the chip-select on which NAND exists */
-        while (cs < GPMC_CS_NUM) {
-                u32 ret = 0;
-                ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1);
-
-                if ((ret & 0xC00) == 0x800) {
-                        printk(KERN_INFO "Found NAND on CS%d\n", cs);
-                        if (nandcs > GPMC_CS_NUM)
-                                nandcs = cs;
-                }
-                cs++;
-        }
-
-        if (nandcs > GPMC_CS_NUM) {
-                printk(KERN_INFO "NAND: Unable to find configuration "
-                                 "in GPMC\n ");
-                return;
-        }
-
-        if (nandcs < GPMC_CS_NUM) {
-                overo_nand_data.cs = nandcs;
-
-                printk(KERN_INFO "Registering NAND on CS%d\n", nandcs);
-                if (gpmc_nand_init(&overo_nand_data) < 0)
-                        printk(KERN_ERR "Unable to register NAND device\n");
-        }
-}
-
 static struct omap2_hsmmc_info mmc[] = {
         {
                 .mmc            = 1,
@@ -604,7 +565,8 @@ static void __init overo_init(void)
         overo_i2c_init();
         omap_display_init(&overo_dss_data);
         omap_serial_init();
-        overo_flash_init();
+        omap_nand_flash_init(0, overo_nand_partitions,
+                             ARRAY_SIZE(overo_nand_partitions));
         usb_musb_init(&musb_board_data);
         usbhs_init(&usbhs_bdata);
         overo_spi_init();
diff --git a/arch/arm/mach-omap2/common-board-devices.c b/arch/arm/mach-omap2/common-board-devices.c
index cea31dda3a73..e94903b2c65b 100644
--- a/arch/arm/mach-omap2/common-board-devices.c
+++ b/arch/arm/mach-omap2/common-board-devices.c
@@ -29,6 +29,7 @@
 
 #include <plat/i2c.h>
 #include <plat/mcspi.h>
+#include <plat/nand.h>
 
 #include "common-board-devices.h"
 
@@ -49,6 +50,8 @@ void __init omap_pmic_init(int bus, u32 clkrate,
         omap_register_i2c_bus(bus, clkrate, &pmic_i2c_board_info, 1);
 }
 
+#if defined(CONFIG_TOUCHSCREEN_ADS7846) || \
+        defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
 static struct omap2_mcspi_device_config ads7846_mcspi_config = {
         .turbo_mode     = 0,
         .single_channel = 1,    /* 0: slave, 1: master */
@@ -104,3 +107,57 @@ void __init omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce,
 
         spi_register_board_info(&ads7846_spi_board_info, 1);
 }
+#else
+void __init omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce,
+                              struct ads7846_platform_data *board_pdata)
+{
+}
+#endif
+
+#if defined(CONFIG_MTD_NAND_OMAP2) || defined(CONFIG_MTD_NAND_OMAP2_MODULE)
+static struct omap_nand_platform_data nand_data = {
+        .dma_channel    = -1,           /* disable DMA in OMAP NAND driver */
+};
+
+void __init omap_nand_flash_init(int options, struct mtd_partition *parts,
+                                 int nr_parts)
+{
+        u8 cs = 0;
+        u8 nandcs = GPMC_CS_NUM + 1;
+
+        /* find out the chip-select on which NAND exists */
+        while (cs < GPMC_CS_NUM) {
+                u32 ret = 0;
+                ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1);
+
+                if ((ret & 0xC00) == 0x800) {
+                        printk(KERN_INFO "Found NAND on CS%d\n", cs);
+                        if (nandcs > GPMC_CS_NUM)
+                                nandcs = cs;
+                }
+                cs++;
+        }
+
+        if (nandcs > GPMC_CS_NUM) {
+                printk(KERN_INFO "NAND: Unable to find configuration "
+                                 "in GPMC\n ");
+                return;
+        }
+
+        if (nandcs < GPMC_CS_NUM) {
+                nand_data.cs = nandcs;
+                nand_data.parts = parts;
+                nand_data.nr_parts = nr_parts;
+                nand_data.options = options;
+
+                printk(KERN_INFO "Registering NAND on CS%d\n", nandcs);
+                if (gpmc_nand_init(&nand_data) < 0)
+                        printk(KERN_ERR "Unable to register NAND device\n");
+        }
+}
+#else
+void __init omap_nand_flash_init(int options, struct mtd_partition *parts,
+                                 int nr_parts)
+{
+}
+#endif
diff --git a/arch/arm/mach-omap2/common-board-devices.h b/arch/arm/mach-omap2/common-board-devices.h
index 0ec3e07239fc..eb80b3b0ef47 100644
--- a/arch/arm/mach-omap2/common-board-devices.h
+++ b/arch/arm/mach-omap2/common-board-devices.h
@@ -2,6 +2,7 @@
 #define __OMAP_COMMON_BOARD_DEVICES__
 
 struct twl4030_platform_data;
+struct mtd_partition;
 
 void omap_pmic_init(int bus, u32 clkrate, const char *pmic_type, int pmic_irq,
                     struct twl4030_platform_data *pmic_data);
@@ -25,18 +26,10 @@ static inline void omap4_pmic_init(const char *pmic_type,
         omap_pmic_init(1, 400, pmic_type, OMAP44XX_IRQ_SYS_1N, pmic_data);
 }
 
-#if defined(CONFIG_TOUCHSCREEN_ADS7846) || \
-        defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
 struct ads7846_platform_data;
 
 void omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce,
                        struct ads7846_platform_data *board_pdata);
-#else
-static inline void omap_ads7846_init(int bus_num,
-                                     int gpio_pendown, int gpio_debounce,
-                                     struct ads7846_platform_data *board_data)
-{
-}
-#endif
+void omap_nand_flash_init(int opts, struct mtd_partition *parts, int n_parts);
 
 #endif /* __OMAP_COMMON_BOARD_DEVICES__ */