diff options
Diffstat (limited to 'arch/arm/mach-omap2')
36 files changed, 480 insertions, 678 deletions
diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c index 95b384d54f8a..49e49d0b7cf5 100644 --- a/arch/arm/mach-omap2/board-2430sdp.c +++ b/arch/arm/mach-omap2/board-2430sdp.c | |||
@@ -34,7 +34,7 @@ | |||
34 | #include <asm/mach/map.h> | 34 | #include <asm/mach/map.h> |
35 | 35 | ||
36 | #include "common.h" | 36 | #include "common.h" |
37 | #include <plat/gpmc.h> | 37 | #include "gpmc.h" |
38 | #include <plat/usb.h> | 38 | #include <plat/usb.h> |
39 | #include "gpmc-smc91x.h" | 39 | #include "gpmc-smc91x.h" |
40 | 40 | ||
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index 2abbd6a9857a..3e8725b73161 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c | |||
@@ -33,10 +33,10 @@ | |||
33 | #include <plat/usb.h> | 33 | #include <plat/usb.h> |
34 | #include "common.h" | 34 | #include "common.h" |
35 | #include <plat-omap/dma-omap.h> | 35 | #include <plat-omap/dma-omap.h> |
36 | #include <plat/gpmc.h> | ||
37 | #include <video/omapdss.h> | 36 | #include <video/omapdss.h> |
38 | #include <video/omap-panel-tfp410.h> | 37 | #include <video/omap-panel-tfp410.h> |
39 | 38 | ||
39 | #include "gpmc.h" | ||
40 | #include "gpmc-smc91x.h" | 40 | #include "gpmc-smc91x.h" |
41 | 41 | ||
42 | #include "board-flash.h" | 42 | #include "board-flash.h" |
diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c index cea3abace815..8cdd18699de6 100644 --- a/arch/arm/mach-omap2/board-apollon.c +++ b/arch/arm/mach-omap2/board-apollon.c | |||
@@ -35,7 +35,7 @@ | |||
35 | 35 | ||
36 | #include <plat/led.h> | 36 | #include <plat/led.h> |
37 | #include "common.h" | 37 | #include "common.h" |
38 | #include <plat/gpmc.h> | 38 | #include "gpmc.h" |
39 | 39 | ||
40 | #include <video/omapdss.h> | 40 | #include <video/omapdss.h> |
41 | #include <video/omap-panel-generic-dpi.h> | 41 | #include <video/omap-panel-generic-dpi.h> |
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index 376d26eb601c..73e2ba9b343b 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c | |||
@@ -40,7 +40,7 @@ | |||
40 | 40 | ||
41 | #include "common.h" | 41 | #include "common.h" |
42 | #include <linux/platform_data/mtd-nand-omap2.h> | 42 | #include <linux/platform_data/mtd-nand-omap2.h> |
43 | #include <plat/gpmc.h> | 43 | #include "gpmc.h" |
44 | #include <plat/usb.h> | 44 | #include <plat/usb.h> |
45 | #include <video/omapdss.h> | 45 | #include <video/omapdss.h> |
46 | #include <video/omap-panel-generic-dpi.h> | 46 | #include <video/omap-panel-generic-dpi.h> |
@@ -53,6 +53,7 @@ | |||
53 | #include "sdram-micron-mt46h32m32lf-6.h" | 53 | #include "sdram-micron-mt46h32m32lf-6.h" |
54 | #include "hsmmc.h" | 54 | #include "hsmmc.h" |
55 | #include "common-board-devices.h" | 55 | #include "common-board-devices.h" |
56 | #include "gpmc-nand.h" | ||
56 | 57 | ||
57 | #define CM_T35_GPIO_PENDOWN 57 | 58 | #define CM_T35_GPIO_PENDOWN 57 |
58 | #define SB_T35_USB_HUB_RESET_GPIO 167 | 59 | #define SB_T35_USB_HUB_RESET_GPIO 167 |
@@ -181,7 +182,7 @@ static struct omap_nand_platform_data cm_t35_nand_data = { | |||
181 | 182 | ||
182 | static void __init cm_t35_init_nand(void) | 183 | static void __init cm_t35_init_nand(void) |
183 | { | 184 | { |
184 | if (gpmc_nand_init(&cm_t35_nand_data) < 0) | 185 | if (gpmc_nand_init(&cm_t35_nand_data, NULL) < 0) |
185 | pr_err("CM-T35: Unable to register NAND device\n"); | 186 | pr_err("CM-T35: Unable to register NAND device\n"); |
186 | } | 187 | } |
187 | #else | 188 | #else |
diff --git a/arch/arm/mach-omap2/board-cm-t3517.c b/arch/arm/mach-omap2/board-cm-t3517.c index 59c0a45f75b0..b5495e415024 100644 --- a/arch/arm/mach-omap2/board-cm-t3517.c +++ b/arch/arm/mach-omap2/board-cm-t3517.c | |||
@@ -41,7 +41,7 @@ | |||
41 | #include "common.h" | 41 | #include "common.h" |
42 | #include <plat/usb.h> | 42 | #include <plat/usb.h> |
43 | #include <linux/platform_data/mtd-nand-omap2.h> | 43 | #include <linux/platform_data/mtd-nand-omap2.h> |
44 | #include <plat/gpmc.h> | 44 | #include "gpmc.h" |
45 | 45 | ||
46 | #include "am35xx.h" | 46 | #include "am35xx.h" |
47 | 47 | ||
@@ -49,6 +49,7 @@ | |||
49 | #include "control.h" | 49 | #include "control.h" |
50 | #include "common-board-devices.h" | 50 | #include "common-board-devices.h" |
51 | #include "am35xx-emac.h" | 51 | #include "am35xx-emac.h" |
52 | #include "gpmc-nand.h" | ||
52 | 53 | ||
53 | #if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE) | 54 | #if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE) |
54 | static struct gpio_led cm_t3517_leds[] = { | 55 | static struct gpio_led cm_t3517_leds[] = { |
@@ -240,7 +241,7 @@ static struct omap_nand_platform_data cm_t3517_nand_data = { | |||
240 | 241 | ||
241 | static void __init cm_t3517_init_nand(void) | 242 | static void __init cm_t3517_init_nand(void) |
242 | { | 243 | { |
243 | if (gpmc_nand_init(&cm_t3517_nand_data) < 0) | 244 | if (gpmc_nand_init(&cm_t3517_nand_data, NULL) < 0) |
244 | pr_err("CM-T3517: NAND initialization failed\n"); | 245 | pr_err("CM-T3517: NAND initialization failed\n"); |
245 | } | 246 | } |
246 | #else | 247 | #else |
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index 1fd161e934c7..3eedb8fd0370 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c | |||
@@ -39,7 +39,7 @@ | |||
39 | #include <asm/mach/flash.h> | 39 | #include <asm/mach/flash.h> |
40 | 40 | ||
41 | #include "common.h" | 41 | #include "common.h" |
42 | #include <plat/gpmc.h> | 42 | #include "gpmc.h" |
43 | #include <linux/platform_data/mtd-nand-omap2.h> | 43 | #include <linux/platform_data/mtd-nand-omap2.h> |
44 | #include <plat/usb.h> | 44 | #include <plat/usb.h> |
45 | #include <video/omapdss.h> | 45 | #include <video/omapdss.h> |
@@ -55,8 +55,11 @@ | |||
55 | #include "sdram-micron-mt46h32m32lf-6.h" | 55 | #include "sdram-micron-mt46h32m32lf-6.h" |
56 | #include "mux.h" | 56 | #include "mux.h" |
57 | #include "hsmmc.h" | 57 | #include "hsmmc.h" |
58 | #include "board-flash.h" | ||
58 | #include "common-board-devices.h" | 59 | #include "common-board-devices.h" |
59 | 60 | ||
61 | #define NAND_CS 0 | ||
62 | |||
60 | #define OMAP_DM9000_GPIO_IRQ 25 | 63 | #define OMAP_DM9000_GPIO_IRQ 25 |
61 | #define OMAP3_DEVKIT_TS_GPIO 27 | 64 | #define OMAP3_DEVKIT_TS_GPIO 27 |
62 | 65 | ||
@@ -621,8 +624,9 @@ static void __init devkit8000_init(void) | |||
621 | 624 | ||
622 | usb_musb_init(NULL); | 625 | usb_musb_init(NULL); |
623 | usbhs_init(&usbhs_bdata); | 626 | usbhs_init(&usbhs_bdata); |
624 | omap_nand_flash_init(NAND_BUSWIDTH_16, devkit8000_nand_partitions, | 627 | board_nand_init(devkit8000_nand_partitions, |
625 | ARRAY_SIZE(devkit8000_nand_partitions)); | 628 | ARRAY_SIZE(devkit8000_nand_partitions), NAND_CS, |
629 | NAND_BUSWIDTH_16, NULL); | ||
626 | omap_twl4030_audio_init("omap3beagle"); | 630 | omap_twl4030_audio_init("omap3beagle"); |
627 | 631 | ||
628 | /* Ensure SDRC pins are mux'd for self-refresh */ | 632 | /* Ensure SDRC pins are mux'd for self-refresh */ |
diff --git a/arch/arm/mach-omap2/board-flash.c b/arch/arm/mach-omap2/board-flash.c index e642acf9cad0..020b96b91f73 100644 --- a/arch/arm/mach-omap2/board-flash.c +++ b/arch/arm/mach-omap2/board-flash.c | |||
@@ -18,13 +18,15 @@ | |||
18 | #include <linux/io.h> | 18 | #include <linux/io.h> |
19 | 19 | ||
20 | #include <plat/cpu.h> | 20 | #include <plat/cpu.h> |
21 | #include <plat/gpmc.h> | 21 | #include "gpmc.h" |
22 | #include <linux/platform_data/mtd-nand-omap2.h> | 22 | #include <linux/platform_data/mtd-nand-omap2.h> |
23 | #include <linux/platform_data/mtd-onenand-omap2.h> | 23 | #include <linux/platform_data/mtd-onenand-omap2.h> |
24 | #include <plat/tc.h> | 24 | #include <plat/tc.h> |
25 | 25 | ||
26 | #include "common.h" | 26 | #include "common.h" |
27 | #include "board-flash.h" | 27 | #include "board-flash.h" |
28 | #include "gpmc-onenand.h" | ||
29 | #include "gpmc-nand.h" | ||
28 | 30 | ||
29 | #define REG_FPGA_REV 0x10 | 31 | #define REG_FPGA_REV 0x10 |
30 | #define REG_FPGA_DIP_SWITCH_INPUT2 0x60 | 32 | #define REG_FPGA_DIP_SWITCH_INPUT2 0x60 |
@@ -104,36 +106,35 @@ __init board_onenand_init(struct mtd_partition *onenand_parts, | |||
104 | defined(CONFIG_MTD_NAND_OMAP2_MODULE) | 106 | defined(CONFIG_MTD_NAND_OMAP2_MODULE) |
105 | 107 | ||
106 | /* Note that all values in this struct are in nanoseconds */ | 108 | /* Note that all values in this struct are in nanoseconds */ |
107 | static struct gpmc_timings nand_timings = { | 109 | struct gpmc_timings nand_default_timings[1] = { |
110 | { | ||
111 | .sync_clk = 0, | ||
108 | 112 | ||
109 | .sync_clk = 0, | 113 | .cs_on = 0, |
114 | .cs_rd_off = 36, | ||
115 | .cs_wr_off = 36, | ||
110 | 116 | ||
111 | .cs_on = 0, | 117 | .adv_on = 6, |
112 | .cs_rd_off = 36, | 118 | .adv_rd_off = 24, |
113 | .cs_wr_off = 36, | 119 | .adv_wr_off = 36, |
114 | 120 | ||
115 | .adv_on = 6, | 121 | .we_off = 30, |
116 | .adv_rd_off = 24, | 122 | .oe_off = 48, |
117 | .adv_wr_off = 36, | ||
118 | 123 | ||
119 | .we_off = 30, | 124 | .access = 54, |
120 | .oe_off = 48, | 125 | .rd_cycle = 72, |
126 | .wr_cycle = 72, | ||
121 | 127 | ||
122 | .access = 54, | 128 | .wr_access = 30, |
123 | .rd_cycle = 72, | 129 | .wr_data_mux_bus = 0, |
124 | .wr_cycle = 72, | 130 | }, |
125 | |||
126 | .wr_access = 30, | ||
127 | .wr_data_mux_bus = 0, | ||
128 | }; | 131 | }; |
129 | 132 | ||
130 | static struct omap_nand_platform_data board_nand_data = { | 133 | static struct omap_nand_platform_data board_nand_data; |
131 | .gpmc_t = &nand_timings, | ||
132 | }; | ||
133 | 134 | ||
134 | void | 135 | void |
135 | __init board_nand_init(struct mtd_partition *nand_parts, | 136 | __init board_nand_init(struct mtd_partition *nand_parts, u8 nr_parts, u8 cs, |
136 | u8 nr_parts, u8 cs, int nand_type) | 137 | int nand_type, struct gpmc_timings *gpmc_t) |
137 | { | 138 | { |
138 | board_nand_data.cs = cs; | 139 | board_nand_data.cs = cs; |
139 | board_nand_data.parts = nand_parts; | 140 | board_nand_data.parts = nand_parts; |
@@ -141,7 +142,7 @@ __init board_nand_init(struct mtd_partition *nand_parts, | |||
141 | board_nand_data.devsize = nand_type; | 142 | board_nand_data.devsize = nand_type; |
142 | 143 | ||
143 | board_nand_data.ecc_opt = OMAP_ECC_HAMMING_CODE_DEFAULT; | 144 | board_nand_data.ecc_opt = OMAP_ECC_HAMMING_CODE_DEFAULT; |
144 | gpmc_nand_init(&board_nand_data); | 145 | gpmc_nand_init(&board_nand_data, gpmc_t); |
145 | } | 146 | } |
146 | #endif /* CONFIG_MTD_NAND_OMAP2 || CONFIG_MTD_NAND_OMAP2_MODULE */ | 147 | #endif /* CONFIG_MTD_NAND_OMAP2 || CONFIG_MTD_NAND_OMAP2_MODULE */ |
147 | 148 | ||
@@ -238,5 +239,6 @@ void __init board_flash_init(struct flash_partitions partition_info[], | |||
238 | pr_err("NAND: Unable to find configuration in GPMC\n"); | 239 | pr_err("NAND: Unable to find configuration in GPMC\n"); |
239 | else | 240 | else |
240 | board_nand_init(partition_info[2].parts, | 241 | board_nand_init(partition_info[2].parts, |
241 | partition_info[2].nr_parts, nandcs, nand_type); | 242 | partition_info[2].nr_parts, nandcs, |
243 | nand_type, nand_default_timings); | ||
242 | } | 244 | } |
diff --git a/arch/arm/mach-omap2/board-flash.h b/arch/arm/mach-omap2/board-flash.h index c44b70d52021..2fb5d41a9fae 100644 --- a/arch/arm/mach-omap2/board-flash.h +++ b/arch/arm/mach-omap2/board-flash.h | |||
@@ -12,7 +12,7 @@ | |||
12 | */ | 12 | */ |
13 | #include <linux/mtd/mtd.h> | 13 | #include <linux/mtd/mtd.h> |
14 | #include <linux/mtd/partitions.h> | 14 | #include <linux/mtd/partitions.h> |
15 | #include <plat/gpmc.h> | 15 | #include "gpmc.h" |
16 | 16 | ||
17 | #define PDC_NOR 1 | 17 | #define PDC_NOR 1 |
18 | #define PDC_NAND 2 | 18 | #define PDC_NAND 2 |
@@ -40,12 +40,14 @@ static inline void board_flash_init(struct flash_partitions part[], | |||
40 | #if defined(CONFIG_MTD_NAND_OMAP2) || \ | 40 | #if defined(CONFIG_MTD_NAND_OMAP2) || \ |
41 | defined(CONFIG_MTD_NAND_OMAP2_MODULE) | 41 | defined(CONFIG_MTD_NAND_OMAP2_MODULE) |
42 | extern void board_nand_init(struct mtd_partition *nand_parts, | 42 | extern void board_nand_init(struct mtd_partition *nand_parts, |
43 | u8 nr_parts, u8 cs, int nand_type); | 43 | u8 nr_parts, u8 cs, int nand_type, struct gpmc_timings *gpmc_t); |
44 | extern struct gpmc_timings nand_default_timings[]; | ||
44 | #else | 45 | #else |
45 | static inline void board_nand_init(struct mtd_partition *nand_parts, | 46 | static inline void board_nand_init(struct mtd_partition *nand_parts, |
46 | u8 nr_parts, u8 cs, int nand_type) | 47 | u8 nr_parts, u8 cs, int nand_type, struct gpmc_timings *gpmc_t) |
47 | { | 48 | { |
48 | } | 49 | } |
50 | #define nand_default_timings NULL | ||
49 | #endif | 51 | #endif |
50 | 52 | ||
51 | #if defined(CONFIG_MTD_ONENAND_OMAP2) || \ | 53 | #if defined(CONFIG_MTD_ONENAND_OMAP2) || \ |
diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c index b3bab62fd5ed..366ebd93ae24 100644 --- a/arch/arm/mach-omap2/board-h4.c +++ b/arch/arm/mach-omap2/board-h4.c | |||
@@ -33,7 +33,6 @@ | |||
33 | 33 | ||
34 | #include <plat/menelaus.h> | 34 | #include <plat/menelaus.h> |
35 | #include <plat-omap/dma-omap.h> | 35 | #include <plat-omap/dma-omap.h> |
36 | #include <plat/gpmc.h> | ||
37 | #include "debug-devices.h" | 36 | #include "debug-devices.h" |
38 | 37 | ||
39 | #include <video/omapdss.h> | 38 | #include <video/omapdss.h> |
@@ -42,6 +41,7 @@ | |||
42 | #include "common.h" | 41 | #include "common.h" |
43 | #include "mux.h" | 42 | #include "mux.h" |
44 | #include "control.h" | 43 | #include "control.h" |
44 | #include "gpmc.h" | ||
45 | 45 | ||
46 | #define H4_FLASH_CS 0 | 46 | #define H4_FLASH_CS 0 |
47 | #define H4_SMC91X_CS 1 | 47 | #define H4_SMC91X_CS 1 |
diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index 48d5e41dfbfa..9a9a9b5f78b6 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c | |||
@@ -30,7 +30,7 @@ | |||
30 | #include <asm/mach/arch.h> | 30 | #include <asm/mach/arch.h> |
31 | 31 | ||
32 | #include "common.h" | 32 | #include "common.h" |
33 | #include <plat/gpmc.h> | 33 | #include "gpmc.h" |
34 | #include <plat/usb.h> | 34 | #include <plat/usb.h> |
35 | 35 | ||
36 | #include <video/omapdss.h> | 36 | #include <video/omapdss.h> |
@@ -43,6 +43,7 @@ | |||
43 | #include "common-board-devices.h" | 43 | #include "common-board-devices.h" |
44 | #include "board-flash.h" | 44 | #include "board-flash.h" |
45 | #include "control.h" | 45 | #include "control.h" |
46 | #include "gpmc-onenand.h" | ||
46 | 47 | ||
47 | #define IGEP2_SMSC911X_CS 5 | 48 | #define IGEP2_SMSC911X_CS 5 |
48 | #define IGEP2_SMSC911X_GPIO 176 | 49 | #define IGEP2_SMSC911X_GPIO 176 |
@@ -175,7 +176,7 @@ static void __init igep_flash_init(void) | |||
175 | pr_info("IGEP: initializing NAND memory device\n"); | 176 | pr_info("IGEP: initializing NAND memory device\n"); |
176 | board_nand_init(igep_flash_partitions, | 177 | board_nand_init(igep_flash_partitions, |
177 | ARRAY_SIZE(igep_flash_partitions), | 178 | ARRAY_SIZE(igep_flash_partitions), |
178 | 0, NAND_BUSWIDTH_16); | 179 | 0, NAND_BUSWIDTH_16, nand_default_timings); |
179 | } else if (mux == IGEP_SYSBOOT_ONENAND) { | 180 | } else if (mux == IGEP_SYSBOOT_ONENAND) { |
180 | pr_info("IGEP: initializing OneNAND memory device\n"); | 181 | pr_info("IGEP: initializing OneNAND memory device\n"); |
181 | board_onenand_init(igep_flash_partitions, | 182 | board_onenand_init(igep_flash_partitions, |
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c index ee8c3cfb95b3..e1628cd25ab4 100644 --- a/arch/arm/mach-omap2/board-ldp.c +++ b/arch/arm/mach-omap2/board-ldp.c | |||
@@ -35,7 +35,7 @@ | |||
35 | #include <asm/mach/map.h> | 35 | #include <asm/mach/map.h> |
36 | 36 | ||
37 | #include "common.h" | 37 | #include "common.h" |
38 | #include <plat/gpmc.h> | 38 | #include "gpmc.h" |
39 | #include <mach/board-zoom.h> | 39 | #include <mach/board-zoom.h> |
40 | #include <plat/usb.h> | 40 | #include <plat/usb.h> |
41 | #include "gpmc-smsc911x.h" | 41 | #include "gpmc-smsc911x.h" |
@@ -420,8 +420,8 @@ static void __init omap_ldp_init(void) | |||
420 | omap_serial_init(); | 420 | omap_serial_init(); |
421 | omap_sdrc_init(NULL, NULL); | 421 | omap_sdrc_init(NULL, NULL); |
422 | usb_musb_init(NULL); | 422 | usb_musb_init(NULL); |
423 | board_nand_init(ldp_nand_partitions, | 423 | board_nand_init(ldp_nand_partitions, ARRAY_SIZE(ldp_nand_partitions), |
424 | ARRAY_SIZE(ldp_nand_partitions), ZOOM_NAND_CS, 0); | 424 | ZOOM_NAND_CS, 0, nand_default_timings); |
425 | 425 | ||
426 | omap_hsmmc_init(mmc); | 426 | omap_hsmmc_init(mmc); |
427 | ldp_display_init(); | 427 | ldp_display_init(); |
diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c index d95f727ca39a..92b19166aac8 100644 --- a/arch/arm/mach-omap2/board-n8x0.c +++ b/arch/arm/mach-omap2/board-n8x0.c | |||
@@ -32,6 +32,7 @@ | |||
32 | #include <plat/mmc.h> | 32 | #include <plat/mmc.h> |
33 | 33 | ||
34 | #include "mux.h" | 34 | #include "mux.h" |
35 | #include "gpmc-onenand.h" | ||
35 | 36 | ||
36 | #define TUSB6010_ASYNC_CS 1 | 37 | #define TUSB6010_ASYNC_CS 1 |
37 | #define TUSB6010_SYNC_CS 4 | 38 | #define TUSB6010_SYNC_CS 4 |
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 388c431c745a..f11a5eb595f7 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c | |||
@@ -41,7 +41,7 @@ | |||
41 | #include "common.h" | 41 | #include "common.h" |
42 | #include <video/omapdss.h> | 42 | #include <video/omapdss.h> |
43 | #include <video/omap-panel-tfp410.h> | 43 | #include <video/omap-panel-tfp410.h> |
44 | #include <plat/gpmc.h> | 44 | #include "gpmc.h" |
45 | #include <linux/platform_data/mtd-nand-omap2.h> | 45 | #include <linux/platform_data/mtd-nand-omap2.h> |
46 | #include <plat/usb.h> | 46 | #include <plat/usb.h> |
47 | #include <plat/omap_device.h> | 47 | #include <plat/omap_device.h> |
@@ -49,8 +49,11 @@ | |||
49 | #include "mux.h" | 49 | #include "mux.h" |
50 | #include "hsmmc.h" | 50 | #include "hsmmc.h" |
51 | #include "pm.h" | 51 | #include "pm.h" |
52 | #include "board-flash.h" | ||
52 | #include "common-board-devices.h" | 53 | #include "common-board-devices.h" |
53 | 54 | ||
55 | #define NAND_CS 0 | ||
56 | |||
54 | /* | 57 | /* |
55 | * OMAP3 Beagle revision | 58 | * OMAP3 Beagle revision |
56 | * Run time detection of Beagle revision is done by reading GPIO. | 59 | * Run time detection of Beagle revision is done by reading GPIO. |
@@ -512,8 +515,9 @@ static void __init omap3_beagle_init(void) | |||
512 | 515 | ||
513 | usb_musb_init(NULL); | 516 | usb_musb_init(NULL); |
514 | usbhs_init(&usbhs_bdata); | 517 | usbhs_init(&usbhs_bdata); |
515 | omap_nand_flash_init(NAND_BUSWIDTH_16, omap3beagle_nand_partitions, | 518 | board_nand_init(omap3beagle_nand_partitions, |
516 | ARRAY_SIZE(omap3beagle_nand_partitions)); | 519 | ARRAY_SIZE(omap3beagle_nand_partitions), NAND_CS, |
520 | NAND_BUSWIDTH_16, NULL); | ||
517 | omap_twl4030_audio_init("omap3beagle"); | 521 | omap_twl4030_audio_init("omap3beagle"); |
518 | 522 | ||
519 | /* Ensure msecure is mux'd to be able to set the RTC. */ | 523 | /* Ensure msecure is mux'd to be able to set the RTC. */ |
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index b9b776b6c954..1d8e926b52fe 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c | |||
@@ -56,6 +56,9 @@ | |||
56 | #include "sdram-micron-mt46h32m32lf-6.h" | 56 | #include "sdram-micron-mt46h32m32lf-6.h" |
57 | #include "hsmmc.h" | 57 | #include "hsmmc.h" |
58 | #include "common-board-devices.h" | 58 | #include "common-board-devices.h" |
59 | #include "board-flash.h" | ||
60 | |||
61 | #define NAND_CS 0 | ||
59 | 62 | ||
60 | #define OMAP3_EVM_TS_GPIO 175 | 63 | #define OMAP3_EVM_TS_GPIO 175 |
61 | #define OMAP3_EVM_EHCI_VBUS 22 | 64 | #define OMAP3_EVM_EHCI_VBUS 22 |
@@ -731,8 +734,9 @@ static void __init omap3_evm_init(void) | |||
731 | } | 734 | } |
732 | usb_musb_init(&musb_board_data); | 735 | usb_musb_init(&musb_board_data); |
733 | usbhs_init(&usbhs_bdata); | 736 | usbhs_init(&usbhs_bdata); |
734 | omap_nand_flash_init(NAND_BUSWIDTH_16, omap3evm_nand_partitions, | 737 | board_nand_init(omap3evm_nand_partitions, |
735 | ARRAY_SIZE(omap3evm_nand_partitions)); | 738 | ARRAY_SIZE(omap3evm_nand_partitions), NAND_CS, |
739 | NAND_BUSWIDTH_16, NULL); | ||
736 | 740 | ||
737 | omap_ads7846_init(1, OMAP3_EVM_TS_GPIO, 310, NULL); | 741 | omap_ads7846_init(1, OMAP3_EVM_TS_GPIO, 310, NULL); |
738 | omap3evm_init_smsc911x(); | 742 | omap3evm_init_smsc911x(); |
diff --git a/arch/arm/mach-omap2/board-omap3logic.c b/arch/arm/mach-omap2/board-omap3logic.c index 7bd8253b5d1d..5cfade235bb4 100644 --- a/arch/arm/mach-omap2/board-omap3logic.c +++ b/arch/arm/mach-omap2/board-omap3logic.c | |||
@@ -35,7 +35,7 @@ | |||
35 | #include <asm/mach/map.h> | 35 | #include <asm/mach/map.h> |
36 | 36 | ||
37 | #include "gpmc-smsc911x.h" | 37 | #include "gpmc-smsc911x.h" |
38 | #include <plat/gpmc.h> | 38 | #include "gpmc.h" |
39 | #include <plat/sdrc.h> | 39 | #include <plat/sdrc.h> |
40 | #include <plat/usb.h> | 40 | #include <plat/usb.h> |
41 | 41 | ||
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c index 00a1f4ae6e44..f286b4b4bd5b 100644 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ b/arch/arm/mach-omap2/board-omap3pandora.c | |||
@@ -50,6 +50,7 @@ | |||
50 | #include "sdram-micron-mt46h32m32lf-6.h" | 50 | #include "sdram-micron-mt46h32m32lf-6.h" |
51 | #include "hsmmc.h" | 51 | #include "hsmmc.h" |
52 | #include "common-board-devices.h" | 52 | #include "common-board-devices.h" |
53 | #include "gpmc-nand.h" | ||
53 | 54 | ||
54 | #define PANDORA_WIFI_IRQ_GPIO 21 | 55 | #define PANDORA_WIFI_IRQ_GPIO 21 |
55 | #define PANDORA_WIFI_NRESET_GPIO 23 | 56 | #define PANDORA_WIFI_NRESET_GPIO 23 |
@@ -602,7 +603,7 @@ static void __init omap3pandora_init(void) | |||
602 | omap_ads7846_init(1, OMAP3_PANDORA_TS_GPIO, 0, NULL); | 603 | omap_ads7846_init(1, OMAP3_PANDORA_TS_GPIO, 0, NULL); |
603 | usbhs_init(&usbhs_bdata); | 604 | usbhs_init(&usbhs_bdata); |
604 | usb_musb_init(NULL); | 605 | usb_musb_init(NULL); |
605 | gpmc_nand_init(&pandora_nand_data); | 606 | gpmc_nand_init(&pandora_nand_data, NULL); |
606 | 607 | ||
607 | /* Ensure SDRC pins are mux'd for self-refresh */ | 608 | /* Ensure SDRC pins are mux'd for self-refresh */ |
608 | omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); | 609 | omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); |
diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c index 731235eb319e..3c83b9fbff45 100644 --- a/arch/arm/mach-omap2/board-omap3stalker.c +++ b/arch/arm/mach-omap2/board-omap3stalker.c | |||
@@ -40,7 +40,7 @@ | |||
40 | #include <asm/mach/flash.h> | 40 | #include <asm/mach/flash.h> |
41 | 41 | ||
42 | #include "common.h" | 42 | #include "common.h" |
43 | #include <plat/gpmc.h> | 43 | #include "gpmc.h" |
44 | #include <linux/platform_data/mtd-nand-omap2.h> | 44 | #include <linux/platform_data/mtd-nand-omap2.h> |
45 | #include <plat/usb.h> | 45 | #include <plat/usb.h> |
46 | #include <video/omapdss.h> | 46 | #include <video/omapdss.h> |
diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c index 944ffc436577..cd282ae0856b 100644 --- a/arch/arm/mach-omap2/board-omap3touchbook.c +++ b/arch/arm/mach-omap2/board-omap3touchbook.c | |||
@@ -44,12 +44,13 @@ | |||
44 | #include <asm/system_info.h> | 44 | #include <asm/system_info.h> |
45 | 45 | ||
46 | #include "common.h" | 46 | #include "common.h" |
47 | #include <plat/gpmc.h> | 47 | #include "gpmc.h" |
48 | #include <linux/platform_data/mtd-nand-omap2.h> | 48 | #include <linux/platform_data/mtd-nand-omap2.h> |
49 | #include <plat/usb.h> | 49 | #include <plat/usb.h> |
50 | 50 | ||
51 | #include "mux.h" | 51 | #include "mux.h" |
52 | #include "hsmmc.h" | 52 | #include "hsmmc.h" |
53 | #include "board-flash.h" | ||
53 | #include "common-board-devices.h" | 54 | #include "common-board-devices.h" |
54 | 55 | ||
55 | #include <asm/setup.h> | 56 | #include <asm/setup.h> |
@@ -59,6 +60,8 @@ | |||
59 | #define TB_BL_PWM_TIMER 9 | 60 | #define TB_BL_PWM_TIMER 9 |
60 | #define TB_KILL_POWER_GPIO 168 | 61 | #define TB_KILL_POWER_GPIO 168 |
61 | 62 | ||
63 | #define NAND_CS 0 | ||
64 | |||
62 | static unsigned long touchbook_revision; | 65 | static unsigned long touchbook_revision; |
63 | 66 | ||
64 | static struct mtd_partition omap3touchbook_nand_partitions[] = { | 67 | static struct mtd_partition omap3touchbook_nand_partitions[] = { |
@@ -365,8 +368,9 @@ static void __init omap3_touchbook_init(void) | |||
365 | omap_ads7846_init(4, OMAP3_TS_GPIO, 310, &ads7846_pdata); | 368 | omap_ads7846_init(4, OMAP3_TS_GPIO, 310, &ads7846_pdata); |
366 | usb_musb_init(NULL); | 369 | usb_musb_init(NULL); |
367 | usbhs_init(&usbhs_bdata); | 370 | usbhs_init(&usbhs_bdata); |
368 | omap_nand_flash_init(NAND_BUSWIDTH_16, omap3touchbook_nand_partitions, | 371 | board_nand_init(omap3touchbook_nand_partitions, |
369 | ARRAY_SIZE(omap3touchbook_nand_partitions)); | 372 | ARRAY_SIZE(omap3touchbook_nand_partitions), NAND_CS, |
373 | NAND_BUSWIDTH_16, NULL); | ||
370 | 374 | ||
371 | /* Ensure SDRC pins are mux'd for self-refresh */ | 375 | /* Ensure SDRC pins are mux'd for self-refresh */ |
372 | omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); | 376 | omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); |
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index b700685762b5..3a9d1fa8bebd 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c | |||
@@ -49,14 +49,17 @@ | |||
49 | #include <video/omapdss.h> | 49 | #include <video/omapdss.h> |
50 | #include <video/omap-panel-generic-dpi.h> | 50 | #include <video/omap-panel-generic-dpi.h> |
51 | #include <video/omap-panel-tfp410.h> | 51 | #include <video/omap-panel-tfp410.h> |
52 | #include <plat/gpmc.h> | 52 | #include "gpmc.h" |
53 | #include <plat/usb.h> | 53 | #include <plat/usb.h> |
54 | 54 | ||
55 | #include "mux.h" | 55 | #include "mux.h" |
56 | #include "sdram-micron-mt46h32m32lf-6.h" | 56 | #include "sdram-micron-mt46h32m32lf-6.h" |
57 | #include "hsmmc.h" | 57 | #include "hsmmc.h" |
58 | #include "board-flash.h" | ||
58 | #include "common-board-devices.h" | 59 | #include "common-board-devices.h" |
59 | 60 | ||
61 | #define NAND_CS 0 | ||
62 | |||
60 | #define OVERO_GPIO_BT_XGATE 15 | 63 | #define OVERO_GPIO_BT_XGATE 15 |
61 | #define OVERO_GPIO_W2W_NRESET 16 | 64 | #define OVERO_GPIO_W2W_NRESET 16 |
62 | #define OVERO_GPIO_PENDOWN 114 | 65 | #define OVERO_GPIO_PENDOWN 114 |
@@ -495,8 +498,8 @@ static void __init overo_init(void) | |||
495 | omap_serial_init(); | 498 | omap_serial_init(); |
496 | omap_sdrc_init(mt46h32m32lf6_sdrc_params, | 499 | omap_sdrc_init(mt46h32m32lf6_sdrc_params, |
497 | mt46h32m32lf6_sdrc_params); | 500 | mt46h32m32lf6_sdrc_params); |
498 | omap_nand_flash_init(0, overo_nand_partitions, | 501 | board_nand_init(overo_nand_partitions, |
499 | ARRAY_SIZE(overo_nand_partitions)); | 502 | ARRAY_SIZE(overo_nand_partitions), NAND_CS, 0, NULL); |
500 | usb_musb_init(NULL); | 503 | usb_musb_init(NULL); |
501 | usbhs_init(&usbhs_bdata); | 504 | usbhs_init(&usbhs_bdata); |
502 | overo_spi_init(); | 505 | overo_spi_init(); |
diff --git a/arch/arm/mach-omap2/board-rm680.c b/arch/arm/mach-omap2/board-rm680.c index 45997bfbcbd2..3c3a47317f8f 100644 --- a/arch/arm/mach-omap2/board-rm680.c +++ b/arch/arm/mach-omap2/board-rm680.c | |||
@@ -25,7 +25,7 @@ | |||
25 | #include <plat/i2c.h> | 25 | #include <plat/i2c.h> |
26 | #include <plat/mmc.h> | 26 | #include <plat/mmc.h> |
27 | #include <plat/usb.h> | 27 | #include <plat/usb.h> |
28 | #include <plat/gpmc.h> | 28 | #include "gpmc.h" |
29 | #include "common.h" | 29 | #include "common.h" |
30 | #include <plat/serial.h> | 30 | #include <plat/serial.h> |
31 | 31 | ||
@@ -33,6 +33,7 @@ | |||
33 | #include "hsmmc.h" | 33 | #include "hsmmc.h" |
34 | #include "sdram-nokia.h" | 34 | #include "sdram-nokia.h" |
35 | #include "common-board-devices.h" | 35 | #include "common-board-devices.h" |
36 | #include "gpmc-onenand.h" | ||
36 | 37 | ||
37 | static struct regulator_consumer_supply rm680_vemmc_consumers[] = { | 38 | static struct regulator_consumer_supply rm680_vemmc_consumers[] = { |
38 | REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"), | 39 | REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"), |
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index 38b3f6389d5b..c2eed847c05b 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c | |||
@@ -32,7 +32,6 @@ | |||
32 | 32 | ||
33 | #include "common.h" | 33 | #include "common.h" |
34 | #include <plat-omap/dma-omap.h> | 34 | #include <plat-omap/dma-omap.h> |
35 | #include <plat/gpmc.h> | ||
36 | #include <plat/omap-pm.h> | 35 | #include <plat/omap-pm.h> |
37 | #include "gpmc-smc91x.h" | 36 | #include "gpmc-smc91x.h" |
38 | 37 | ||
@@ -54,6 +53,8 @@ | |||
54 | #include "mux.h" | 53 | #include "mux.h" |
55 | #include "hsmmc.h" | 54 | #include "hsmmc.h" |
56 | #include "common-board-devices.h" | 55 | #include "common-board-devices.h" |
56 | #include "gpmc.h" | ||
57 | #include "gpmc-onenand.h" | ||
57 | 58 | ||
58 | #define SYSTEM_REV_B_USES_VAUX3 0x1699 | 59 | #define SYSTEM_REV_B_USES_VAUX3 0x1699 |
59 | #define SYSTEM_REV_S_USES_VAUX3 0x8 | 60 | #define SYSTEM_REV_S_USES_VAUX3 0x8 |
diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c index 3b1c03e1c741..63b33c63bd94 100644 --- a/arch/arm/mach-omap2/board-rx51.c +++ b/arch/arm/mach-omap2/board-rx51.c | |||
@@ -23,12 +23,12 @@ | |||
23 | #include <asm/mach/arch.h> | 23 | #include <asm/mach/arch.h> |
24 | #include <asm/mach/map.h> | 24 | #include <asm/mach/map.h> |
25 | 25 | ||
26 | #include "common.h" | ||
27 | #include <plat-omap/dma-omap.h> | 26 | #include <plat-omap/dma-omap.h> |
28 | #include <plat/gpmc.h> | ||
29 | #include <plat/usb.h> | 27 | #include <plat/usb.h> |
30 | 28 | ||
29 | #include "common.h" | ||
31 | #include "mux.h" | 30 | #include "mux.h" |
31 | #include "gpmc.h" | ||
32 | #include "pm.h" | 32 | #include "pm.h" |
33 | #include "sdram-nokia.h" | 33 | #include "sdram-nokia.h" |
34 | 34 | ||
diff --git a/arch/arm/mach-omap2/board-zoom-debugboard.c b/arch/arm/mach-omap2/board-zoom-debugboard.c index afb2278a29f6..be9f71d436bf 100644 --- a/arch/arm/mach-omap2/board-zoom-debugboard.c +++ b/arch/arm/mach-omap2/board-zoom-debugboard.c | |||
@@ -17,7 +17,7 @@ | |||
17 | #include <linux/regulator/fixed.h> | 17 | #include <linux/regulator/fixed.h> |
18 | #include <linux/regulator/machine.h> | 18 | #include <linux/regulator/machine.h> |
19 | 19 | ||
20 | #include <plat/gpmc.h> | 20 | #include "gpmc.h" |
21 | #include "gpmc-smsc911x.h" | 21 | #include "gpmc-smsc911x.h" |
22 | 22 | ||
23 | #include <mach/board-zoom.h> | 23 | #include <mach/board-zoom.h> |
diff --git a/arch/arm/mach-omap2/board-zoom.c b/arch/arm/mach-omap2/board-zoom.c index 4994438e1f46..c39578c1fa6d 100644 --- a/arch/arm/mach-omap2/board-zoom.c +++ b/arch/arm/mach-omap2/board-zoom.c | |||
@@ -113,8 +113,9 @@ static void __init omap_zoom_init(void) | |||
113 | usbhs_init(&usbhs_bdata); | 113 | usbhs_init(&usbhs_bdata); |
114 | } | 114 | } |
115 | 115 | ||
116 | board_nand_init(zoom_nand_partitions, ARRAY_SIZE(zoom_nand_partitions), | 116 | board_nand_init(zoom_nand_partitions, |
117 | ZOOM_NAND_CS, NAND_BUSWIDTH_16); | 117 | ARRAY_SIZE(zoom_nand_partitions), ZOOM_NAND_CS, |
118 | NAND_BUSWIDTH_16, nand_default_timings); | ||
118 | zoom_debugboard_init(); | 119 | zoom_debugboard_init(); |
119 | zoom_peripherals_init(); | 120 | zoom_peripherals_init(); |
120 | 121 | ||
diff --git a/arch/arm/mach-omap2/common-board-devices.c b/arch/arm/mach-omap2/common-board-devices.c index 48daac2581b4..ad856092c06a 100644 --- a/arch/arm/mach-omap2/common-board-devices.c +++ b/arch/arm/mach-omap2/common-board-devices.c | |||
@@ -25,7 +25,6 @@ | |||
25 | #include <linux/spi/ads7846.h> | 25 | #include <linux/spi/ads7846.h> |
26 | 26 | ||
27 | #include <linux/platform_data/spi-omap2-mcspi.h> | 27 | #include <linux/platform_data/spi-omap2-mcspi.h> |
28 | #include <linux/platform_data/mtd-nand-omap2.h> | ||
29 | 28 | ||
30 | #include "common.h" | 29 | #include "common.h" |
31 | #include "common-board-devices.h" | 30 | #include "common-board-devices.h" |
@@ -96,48 +95,3 @@ void __init omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce, | |||
96 | { | 95 | { |
97 | } | 96 | } |
98 | #endif | 97 | #endif |
99 | |||
100 | #if defined(CONFIG_MTD_NAND_OMAP2) || defined(CONFIG_MTD_NAND_OMAP2_MODULE) | ||
101 | static struct omap_nand_platform_data nand_data; | ||
102 | |||
103 | void __init omap_nand_flash_init(int options, struct mtd_partition *parts, | ||
104 | int nr_parts) | ||
105 | { | ||
106 | u8 cs = 0; | ||
107 | u8 nandcs = GPMC_CS_NUM + 1; | ||
108 | |||
109 | /* find out the chip-select on which NAND exists */ | ||
110 | while (cs < GPMC_CS_NUM) { | ||
111 | u32 ret = 0; | ||
112 | ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1); | ||
113 | |||
114 | if ((ret & 0xC00) == 0x800) { | ||
115 | printk(KERN_INFO "Found NAND on CS%d\n", cs); | ||
116 | if (nandcs > GPMC_CS_NUM) | ||
117 | nandcs = cs; | ||
118 | } | ||
119 | cs++; | ||
120 | } | ||
121 | |||
122 | if (nandcs > GPMC_CS_NUM) { | ||
123 | pr_info("NAND: Unable to find configuration in GPMC\n"); | ||
124 | return; | ||
125 | } | ||
126 | |||
127 | if (nandcs < GPMC_CS_NUM) { | ||
128 | nand_data.cs = nandcs; | ||
129 | nand_data.parts = parts; | ||
130 | nand_data.nr_parts = nr_parts; | ||
131 | nand_data.devsize = options; | ||
132 | |||
133 | printk(KERN_INFO "Registering NAND on CS%d\n", nandcs); | ||
134 | if (gpmc_nand_init(&nand_data) < 0) | ||
135 | printk(KERN_ERR "Unable to register NAND device\n"); | ||
136 | } | ||
137 | } | ||
138 | #else | ||
139 | void __init omap_nand_flash_init(int options, struct mtd_partition *parts, | ||
140 | int nr_parts) | ||
141 | { | ||
142 | } | ||
143 | #endif | ||
diff --git a/arch/arm/mach-omap2/common-board-devices.h b/arch/arm/mach-omap2/common-board-devices.h index a0b4a42836ab..72bb41b3fd25 100644 --- a/arch/arm/mach-omap2/common-board-devices.h +++ b/arch/arm/mach-omap2/common-board-devices.h | |||
@@ -10,6 +10,5 @@ struct ads7846_platform_data; | |||
10 | 10 | ||
11 | void omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce, | 11 | void omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce, |
12 | struct ads7846_platform_data *board_pdata); | 12 | struct ads7846_platform_data *board_pdata); |
13 | void omap_nand_flash_init(int opts, struct mtd_partition *parts, int n_parts); | ||
14 | 13 | ||
15 | #endif /* __OMAP_COMMON_BOARD_DEVICES__ */ | 14 | #endif /* __OMAP_COMMON_BOARD_DEVICES__ */ |
diff --git a/arch/arm/mach-omap2/gpmc-nand.c b/arch/arm/mach-omap2/gpmc-nand.c index 4acf497faeb3..8607735b3ab3 100644 --- a/arch/arm/mach-omap2/gpmc-nand.c +++ b/arch/arm/mach-omap2/gpmc-nand.c | |||
@@ -17,9 +17,12 @@ | |||
17 | 17 | ||
18 | #include <asm/mach/flash.h> | 18 | #include <asm/mach/flash.h> |
19 | 19 | ||
20 | #include <plat/gpmc.h> | 20 | #include "gpmc.h" |
21 | |||
22 | #include "soc.h" | 21 | #include "soc.h" |
22 | #include "gpmc-nand.h" | ||
23 | |||
24 | /* minimum size for IO mapping */ | ||
25 | #define NAND_IO_SIZE 4 | ||
23 | 26 | ||
24 | static struct resource gpmc_nand_resource[] = { | 27 | static struct resource gpmc_nand_resource[] = { |
25 | { | 28 | { |
@@ -40,41 +43,36 @@ static struct platform_device gpmc_nand_device = { | |||
40 | .resource = gpmc_nand_resource, | 43 | .resource = gpmc_nand_resource, |
41 | }; | 44 | }; |
42 | 45 | ||
43 | static int omap2_nand_gpmc_retime(struct omap_nand_platform_data *gpmc_nand_data) | 46 | static int omap2_nand_gpmc_retime( |
47 | struct omap_nand_platform_data *gpmc_nand_data, | ||
48 | struct gpmc_timings *gpmc_t) | ||
44 | { | 49 | { |
45 | struct gpmc_timings t; | 50 | struct gpmc_timings t; |
46 | int err; | 51 | int err; |
47 | 52 | ||
48 | if (!gpmc_nand_data->gpmc_t) | ||
49 | return 0; | ||
50 | |||
51 | memset(&t, 0, sizeof(t)); | 53 | memset(&t, 0, sizeof(t)); |
52 | t.sync_clk = gpmc_nand_data->gpmc_t->sync_clk; | 54 | t.sync_clk = gpmc_t->sync_clk; |
53 | t.cs_on = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->cs_on); | 55 | t.cs_on = gpmc_round_ns_to_ticks(gpmc_t->cs_on); |
54 | t.adv_on = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->adv_on); | 56 | t.adv_on = gpmc_round_ns_to_ticks(gpmc_t->adv_on); |
55 | 57 | ||
56 | /* Read */ | 58 | /* Read */ |
57 | t.adv_rd_off = gpmc_round_ns_to_ticks( | 59 | t.adv_rd_off = gpmc_round_ns_to_ticks(gpmc_t->adv_rd_off); |
58 | gpmc_nand_data->gpmc_t->adv_rd_off); | ||
59 | t.oe_on = t.adv_on; | 60 | t.oe_on = t.adv_on; |
60 | t.access = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->access); | 61 | t.access = gpmc_round_ns_to_ticks(gpmc_t->access); |
61 | t.oe_off = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->oe_off); | 62 | t.oe_off = gpmc_round_ns_to_ticks(gpmc_t->oe_off); |
62 | t.cs_rd_off = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->cs_rd_off); | 63 | t.cs_rd_off = gpmc_round_ns_to_ticks(gpmc_t->cs_rd_off); |
63 | t.rd_cycle = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->rd_cycle); | 64 | t.rd_cycle = gpmc_round_ns_to_ticks(gpmc_t->rd_cycle); |
64 | 65 | ||
65 | /* Write */ | 66 | /* Write */ |
66 | t.adv_wr_off = gpmc_round_ns_to_ticks( | 67 | t.adv_wr_off = gpmc_round_ns_to_ticks(gpmc_t->adv_wr_off); |
67 | gpmc_nand_data->gpmc_t->adv_wr_off); | ||
68 | t.we_on = t.oe_on; | 68 | t.we_on = t.oe_on; |
69 | if (cpu_is_omap34xx()) { | 69 | if (cpu_is_omap34xx()) { |
70 | t.wr_data_mux_bus = gpmc_round_ns_to_ticks( | 70 | t.wr_data_mux_bus = gpmc_round_ns_to_ticks(gpmc_t->wr_data_mux_bus); |
71 | gpmc_nand_data->gpmc_t->wr_data_mux_bus); | 71 | t.wr_access = gpmc_round_ns_to_ticks(gpmc_t->wr_access); |
72 | t.wr_access = gpmc_round_ns_to_ticks( | ||
73 | gpmc_nand_data->gpmc_t->wr_access); | ||
74 | } | 72 | } |
75 | t.we_off = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->we_off); | 73 | t.we_off = gpmc_round_ns_to_ticks(gpmc_t->we_off); |
76 | t.cs_wr_off = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->cs_wr_off); | 74 | t.cs_wr_off = gpmc_round_ns_to_ticks(gpmc_t->cs_wr_off); |
77 | t.wr_cycle = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->wr_cycle); | 75 | t.wr_cycle = gpmc_round_ns_to_ticks(gpmc_t->wr_cycle); |
78 | 76 | ||
79 | /* Configure GPMC */ | 77 | /* Configure GPMC */ |
80 | if (gpmc_nand_data->devsize == NAND_BUSWIDTH_16) | 78 | if (gpmc_nand_data->devsize == NAND_BUSWIDTH_16) |
@@ -91,7 +89,29 @@ static int omap2_nand_gpmc_retime(struct omap_nand_platform_data *gpmc_nand_data | |||
91 | return 0; | 89 | return 0; |
92 | } | 90 | } |
93 | 91 | ||
94 | int __init gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data) | 92 | static bool __init gpmc_hwecc_bch_capable(enum omap_ecc ecc_opt) |
93 | { | ||
94 | /* support only OMAP3 class */ | ||
95 | if (!cpu_is_omap34xx()) { | ||
96 | pr_err("BCH ecc is not supported on this CPU\n"); | ||
97 | return 0; | ||
98 | } | ||
99 | |||
100 | /* | ||
101 | * For now, assume 4-bit mode is only supported on OMAP3630 ES1.x, x>=1. | ||
102 | * Other chips may be added if confirmed to work. | ||
103 | */ | ||
104 | if ((ecc_opt == OMAP_ECC_BCH4_CODE_HW) && | ||
105 | (!cpu_is_omap3630() || (GET_OMAP_REVISION() == 0))) { | ||
106 | pr_err("BCH 4-bit mode is not supported on this CPU\n"); | ||
107 | return 0; | ||
108 | } | ||
109 | |||
110 | return 1; | ||
111 | } | ||
112 | |||
113 | int __init gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data, | ||
114 | struct gpmc_timings *gpmc_t) | ||
95 | { | 115 | { |
96 | int err = 0; | 116 | int err = 0; |
97 | struct device *dev = &gpmc_nand_device.dev; | 117 | struct device *dev = &gpmc_nand_device.dev; |
@@ -112,11 +132,13 @@ int __init gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data) | |||
112 | gpmc_get_client_irq(GPMC_IRQ_FIFOEVENTENABLE); | 132 | gpmc_get_client_irq(GPMC_IRQ_FIFOEVENTENABLE); |
113 | gpmc_nand_resource[2].start = | 133 | gpmc_nand_resource[2].start = |
114 | gpmc_get_client_irq(GPMC_IRQ_COUNT_EVENT); | 134 | gpmc_get_client_irq(GPMC_IRQ_COUNT_EVENT); |
115 | /* Set timings in GPMC */ | 135 | |
116 | err = omap2_nand_gpmc_retime(gpmc_nand_data); | 136 | if (gpmc_t) { |
117 | if (err < 0) { | 137 | err = omap2_nand_gpmc_retime(gpmc_nand_data, gpmc_t); |
118 | dev_err(dev, "Unable to set gpmc timings: %d\n", err); | 138 | if (err < 0) { |
119 | return err; | 139 | dev_err(dev, "Unable to set gpmc timings: %d\n", err); |
140 | return err; | ||
141 | } | ||
120 | } | 142 | } |
121 | 143 | ||
122 | /* Enable RD PIN Monitoring Reg */ | 144 | /* Enable RD PIN Monitoring Reg */ |
@@ -126,6 +148,9 @@ int __init gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data) | |||
126 | 148 | ||
127 | gpmc_update_nand_reg(&gpmc_nand_data->reg, gpmc_nand_data->cs); | 149 | gpmc_update_nand_reg(&gpmc_nand_data->reg, gpmc_nand_data->cs); |
128 | 150 | ||
151 | if (!gpmc_hwecc_bch_capable(gpmc_nand_data->ecc_opt)) | ||
152 | return -EINVAL; | ||
153 | |||
129 | err = platform_device_register(&gpmc_nand_device); | 154 | err = platform_device_register(&gpmc_nand_device); |
130 | if (err < 0) { | 155 | if (err < 0) { |
131 | dev_err(dev, "Unable to register NAND device\n"); | 156 | dev_err(dev, "Unable to register NAND device\n"); |
diff --git a/arch/arm/mach-omap2/gpmc-nand.h b/arch/arm/mach-omap2/gpmc-nand.h new file mode 100644 index 000000000000..d59e1281e851 --- /dev/null +++ b/arch/arm/mach-omap2/gpmc-nand.h | |||
@@ -0,0 +1,27 @@ | |||
1 | /* | ||
2 | * arch/arm/mach-omap2/gpmc-nand.h | ||
3 | * | ||
4 | * This program is free software; you can redistribute it and/or modify it | ||
5 | * under the terms of the GNU General Public License as published by the | ||
6 | * Free Software Foundation; either version 2 of the License, or (at your | ||
7 | * option) any later version. | ||
8 | */ | ||
9 | |||
10 | #ifndef __OMAP2_GPMC_NAND_H | ||
11 | #define __OMAP2_GPMC_NAND_H | ||
12 | |||
13 | #include "gpmc.h" | ||
14 | #include <linux/platform_data/mtd-nand-omap2.h> | ||
15 | |||
16 | #if IS_ENABLED(CONFIG_MTD_NAND_OMAP2) | ||
17 | extern int gpmc_nand_init(struct omap_nand_platform_data *d, | ||
18 | struct gpmc_timings *gpmc_t); | ||
19 | #else | ||
20 | static inline int gpmc_nand_init(struct omap_nand_platform_data *d, | ||
21 | struct gpmc_timings *gpmc_t) | ||
22 | { | ||
23 | return 0; | ||
24 | } | ||
25 | #endif | ||
26 | |||
27 | #endif | ||
diff --git a/arch/arm/mach-omap2/gpmc-onenand.c b/arch/arm/mach-omap2/gpmc-onenand.c index 916716e1da3b..d102183ed9a5 100644 --- a/arch/arm/mach-omap2/gpmc-onenand.c +++ b/arch/arm/mach-omap2/gpmc-onenand.c | |||
@@ -16,15 +16,25 @@ | |||
16 | #include <linux/mtd/onenand_regs.h> | 16 | #include <linux/mtd/onenand_regs.h> |
17 | #include <linux/io.h> | 17 | #include <linux/io.h> |
18 | #include <linux/platform_data/mtd-onenand-omap2.h> | 18 | #include <linux/platform_data/mtd-onenand-omap2.h> |
19 | #include <linux/err.h> | ||
19 | 20 | ||
20 | #include <asm/mach/flash.h> | 21 | #include <asm/mach/flash.h> |
21 | 22 | ||
22 | #include <plat/gpmc.h> | 23 | #include "gpmc.h" |
23 | |||
24 | #include "soc.h" | 24 | #include "soc.h" |
25 | #include "gpmc-onenand.h" | ||
25 | 26 | ||
26 | #define ONENAND_IO_SIZE SZ_128K | 27 | #define ONENAND_IO_SIZE SZ_128K |
27 | 28 | ||
29 | #define ONENAND_FLAG_SYNCREAD (1 << 0) | ||
30 | #define ONENAND_FLAG_SYNCWRITE (1 << 1) | ||
31 | #define ONENAND_FLAG_HF (1 << 2) | ||
32 | #define ONENAND_FLAG_VHF (1 << 3) | ||
33 | |||
34 | static unsigned onenand_flags; | ||
35 | static unsigned latency; | ||
36 | static int fclk_offset; | ||
37 | |||
28 | static struct omap_onenand_platform_data *gpmc_onenand_data; | 38 | static struct omap_onenand_platform_data *gpmc_onenand_data; |
29 | 39 | ||
30 | static struct resource gpmc_onenand_resource = { | 40 | static struct resource gpmc_onenand_resource = { |
@@ -38,11 +48,9 @@ static struct platform_device gpmc_onenand_device = { | |||
38 | .resource = &gpmc_onenand_resource, | 48 | .resource = &gpmc_onenand_resource, |
39 | }; | 49 | }; |
40 | 50 | ||
41 | static int omap2_onenand_set_async_mode(int cs, void __iomem *onenand_base) | 51 | static struct gpmc_timings omap2_onenand_calc_async_timings(void) |
42 | { | 52 | { |
43 | struct gpmc_timings t; | 53 | struct gpmc_timings t; |
44 | u32 reg; | ||
45 | int err; | ||
46 | 54 | ||
47 | const int t_cer = 15; | 55 | const int t_cer = 15; |
48 | const int t_avdp = 12; | 56 | const int t_avdp = 12; |
@@ -55,11 +63,6 @@ static int omap2_onenand_set_async_mode(int cs, void __iomem *onenand_base) | |||
55 | const int t_wpl = 40; | 63 | const int t_wpl = 40; |
56 | const int t_wph = 30; | 64 | const int t_wph = 30; |
57 | 65 | ||
58 | /* Ensure sync read and sync write are disabled */ | ||
59 | reg = readw(onenand_base + ONENAND_REG_SYS_CFG1); | ||
60 | reg &= ~ONENAND_SYS_CFG1_SYNC_READ & ~ONENAND_SYS_CFG1_SYNC_WRITE; | ||
61 | writew(reg, onenand_base + ONENAND_REG_SYS_CFG1); | ||
62 | |||
63 | memset(&t, 0, sizeof(t)); | 66 | memset(&t, 0, sizeof(t)); |
64 | t.sync_clk = 0; | 67 | t.sync_clk = 0; |
65 | t.cs_on = 0; | 68 | t.cs_on = 0; |
@@ -86,25 +89,30 @@ static int omap2_onenand_set_async_mode(int cs, void __iomem *onenand_base) | |||
86 | t.cs_wr_off = t.we_off + gpmc_round_ns_to_ticks(t_wph); | 89 | t.cs_wr_off = t.we_off + gpmc_round_ns_to_ticks(t_wph); |
87 | t.wr_cycle = t.cs_wr_off + gpmc_round_ns_to_ticks(t_cez); | 90 | t.wr_cycle = t.cs_wr_off + gpmc_round_ns_to_ticks(t_cez); |
88 | 91 | ||
92 | return t; | ||
93 | } | ||
94 | |||
95 | static int gpmc_set_async_mode(int cs, struct gpmc_timings *t) | ||
96 | { | ||
89 | /* Configure GPMC for asynchronous read */ | 97 | /* Configure GPMC for asynchronous read */ |
90 | gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, | 98 | gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, |
91 | GPMC_CONFIG1_DEVICESIZE_16 | | 99 | GPMC_CONFIG1_DEVICESIZE_16 | |
92 | GPMC_CONFIG1_MUXADDDATA); | 100 | GPMC_CONFIG1_MUXADDDATA); |
93 | 101 | ||
94 | err = gpmc_cs_set_timings(cs, &t); | 102 | return gpmc_cs_set_timings(cs, t); |
95 | if (err) | 103 | } |
96 | return err; | 104 | |
105 | static void omap2_onenand_set_async_mode(void __iomem *onenand_base) | ||
106 | { | ||
107 | u32 reg; | ||
97 | 108 | ||
98 | /* Ensure sync read and sync write are disabled */ | 109 | /* Ensure sync read and sync write are disabled */ |
99 | reg = readw(onenand_base + ONENAND_REG_SYS_CFG1); | 110 | reg = readw(onenand_base + ONENAND_REG_SYS_CFG1); |
100 | reg &= ~ONENAND_SYS_CFG1_SYNC_READ & ~ONENAND_SYS_CFG1_SYNC_WRITE; | 111 | reg &= ~ONENAND_SYS_CFG1_SYNC_READ & ~ONENAND_SYS_CFG1_SYNC_WRITE; |
101 | writew(reg, onenand_base + ONENAND_REG_SYS_CFG1); | 112 | writew(reg, onenand_base + ONENAND_REG_SYS_CFG1); |
102 | |||
103 | return 0; | ||
104 | } | 113 | } |
105 | 114 | ||
106 | static void set_onenand_cfg(void __iomem *onenand_base, int latency, | 115 | static void set_onenand_cfg(void __iomem *onenand_base) |
107 | int sync_read, int sync_write, int hf, int vhf) | ||
108 | { | 116 | { |
109 | u32 reg; | 117 | u32 reg; |
110 | 118 | ||
@@ -112,19 +120,19 @@ static void set_onenand_cfg(void __iomem *onenand_base, int latency, | |||
112 | reg &= ~((0x7 << ONENAND_SYS_CFG1_BRL_SHIFT) | (0x7 << 9)); | 120 | reg &= ~((0x7 << ONENAND_SYS_CFG1_BRL_SHIFT) | (0x7 << 9)); |
113 | reg |= (latency << ONENAND_SYS_CFG1_BRL_SHIFT) | | 121 | reg |= (latency << ONENAND_SYS_CFG1_BRL_SHIFT) | |
114 | ONENAND_SYS_CFG1_BL_16; | 122 | ONENAND_SYS_CFG1_BL_16; |
115 | if (sync_read) | 123 | if (onenand_flags & ONENAND_FLAG_SYNCREAD) |
116 | reg |= ONENAND_SYS_CFG1_SYNC_READ; | 124 | reg |= ONENAND_SYS_CFG1_SYNC_READ; |
117 | else | 125 | else |
118 | reg &= ~ONENAND_SYS_CFG1_SYNC_READ; | 126 | reg &= ~ONENAND_SYS_CFG1_SYNC_READ; |
119 | if (sync_write) | 127 | if (onenand_flags & ONENAND_FLAG_SYNCWRITE) |
120 | reg |= ONENAND_SYS_CFG1_SYNC_WRITE; | 128 | reg |= ONENAND_SYS_CFG1_SYNC_WRITE; |
121 | else | 129 | else |
122 | reg &= ~ONENAND_SYS_CFG1_SYNC_WRITE; | 130 | reg &= ~ONENAND_SYS_CFG1_SYNC_WRITE; |
123 | if (hf) | 131 | if (onenand_flags & ONENAND_FLAG_HF) |
124 | reg |= ONENAND_SYS_CFG1_HF; | 132 | reg |= ONENAND_SYS_CFG1_HF; |
125 | else | 133 | else |
126 | reg &= ~ONENAND_SYS_CFG1_HF; | 134 | reg &= ~ONENAND_SYS_CFG1_HF; |
127 | if (vhf) | 135 | if (onenand_flags & ONENAND_FLAG_VHF) |
128 | reg |= ONENAND_SYS_CFG1_VHF; | 136 | reg |= ONENAND_SYS_CFG1_VHF; |
129 | else | 137 | else |
130 | reg &= ~ONENAND_SYS_CFG1_VHF; | 138 | reg &= ~ONENAND_SYS_CFG1_VHF; |
@@ -132,21 +140,10 @@ static void set_onenand_cfg(void __iomem *onenand_base, int latency, | |||
132 | } | 140 | } |
133 | 141 | ||
134 | static int omap2_onenand_get_freq(struct omap_onenand_platform_data *cfg, | 142 | static int omap2_onenand_get_freq(struct omap_onenand_platform_data *cfg, |
135 | void __iomem *onenand_base, bool *clk_dep) | 143 | void __iomem *onenand_base) |
136 | { | 144 | { |
137 | u16 ver = readw(onenand_base + ONENAND_REG_VERSION_ID); | 145 | u16 ver = readw(onenand_base + ONENAND_REG_VERSION_ID); |
138 | int freq = 0; | 146 | int freq; |
139 | |||
140 | if (cfg->get_freq) { | ||
141 | struct onenand_freq_info fi; | ||
142 | |||
143 | fi.maf_id = readw(onenand_base + ONENAND_REG_MANUFACTURER_ID); | ||
144 | fi.dev_id = readw(onenand_base + ONENAND_REG_DEVICE_ID); | ||
145 | fi.ver_id = ver; | ||
146 | freq = cfg->get_freq(&fi, clk_dep); | ||
147 | if (freq) | ||
148 | return freq; | ||
149 | } | ||
150 | 147 | ||
151 | switch ((ver >> 4) & 0xf) { | 148 | switch ((ver >> 4) & 0xf) { |
152 | case 0: | 149 | case 0: |
@@ -172,9 +169,9 @@ static int omap2_onenand_get_freq(struct omap_onenand_platform_data *cfg, | |||
172 | return freq; | 169 | return freq; |
173 | } | 170 | } |
174 | 171 | ||
175 | static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg, | 172 | static struct gpmc_timings |
176 | void __iomem *onenand_base, | 173 | omap2_onenand_calc_sync_timings(struct omap_onenand_platform_data *cfg, |
177 | int *freq_ptr) | 174 | int freq) |
178 | { | 175 | { |
179 | struct gpmc_timings t; | 176 | struct gpmc_timings t; |
180 | const int t_cer = 15; | 177 | const int t_cer = 15; |
@@ -184,29 +181,15 @@ static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg, | |||
184 | const int t_wpl = 40; | 181 | const int t_wpl = 40; |
185 | const int t_wph = 30; | 182 | const int t_wph = 30; |
186 | int min_gpmc_clk_period, t_ces, t_avds, t_avdh, t_ach, t_aavdh, t_rdyo; | 183 | int min_gpmc_clk_period, t_ces, t_avds, t_avdh, t_ach, t_aavdh, t_rdyo; |
187 | int div, fclk_offset_ns, fclk_offset, gpmc_clk_ns, latency; | ||
188 | int first_time = 0, hf = 0, vhf = 0, sync_read = 0, sync_write = 0; | ||
189 | int err, ticks_cez; | ||
190 | int cs = cfg->cs, freq = *freq_ptr; | ||
191 | u32 reg; | 184 | u32 reg; |
192 | bool clk_dep = false; | 185 | int div, fclk_offset_ns, gpmc_clk_ns; |
186 | int ticks_cez; | ||
187 | int cs = cfg->cs; | ||
193 | 188 | ||
194 | if (cfg->flags & ONENAND_SYNC_READ) { | 189 | if (cfg->flags & ONENAND_SYNC_READ) |
195 | sync_read = 1; | 190 | onenand_flags = ONENAND_FLAG_SYNCREAD; |
196 | } else if (cfg->flags & ONENAND_SYNC_READWRITE) { | 191 | else if (cfg->flags & ONENAND_SYNC_READWRITE) |
197 | sync_read = 1; | 192 | onenand_flags = ONENAND_FLAG_SYNCREAD | ONENAND_FLAG_SYNCWRITE; |
198 | sync_write = 1; | ||
199 | } else | ||
200 | return omap2_onenand_set_async_mode(cs, onenand_base); | ||
201 | |||
202 | if (!freq) { | ||
203 | /* Very first call freq is not known */ | ||
204 | err = omap2_onenand_set_async_mode(cs, onenand_base); | ||
205 | if (err) | ||
206 | return err; | ||
207 | freq = omap2_onenand_get_freq(cfg, onenand_base, &clk_dep); | ||
208 | first_time = 1; | ||
209 | } | ||
210 | 193 | ||
211 | switch (freq) { | 194 | switch (freq) { |
212 | case 104: | 195 | case 104: |
@@ -244,44 +227,31 @@ static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg, | |||
244 | t_ach = 9; | 227 | t_ach = 9; |
245 | t_aavdh = 7; | 228 | t_aavdh = 7; |
246 | t_rdyo = 15; | 229 | t_rdyo = 15; |
247 | sync_write = 0; | 230 | onenand_flags &= ~ONENAND_FLAG_SYNCWRITE; |
248 | break; | 231 | break; |
249 | } | 232 | } |
250 | 233 | ||
251 | div = gpmc_cs_calc_divider(cs, min_gpmc_clk_period); | 234 | div = gpmc_calc_divider(min_gpmc_clk_period); |
252 | gpmc_clk_ns = gpmc_ticks_to_ns(div); | 235 | gpmc_clk_ns = gpmc_ticks_to_ns(div); |
253 | if (gpmc_clk_ns < 15) /* >66Mhz */ | 236 | if (gpmc_clk_ns < 15) /* >66Mhz */ |
254 | hf = 1; | 237 | onenand_flags |= ONENAND_FLAG_HF; |
238 | else | ||
239 | onenand_flags &= ~ONENAND_FLAG_HF; | ||
255 | if (gpmc_clk_ns < 12) /* >83Mhz */ | 240 | if (gpmc_clk_ns < 12) /* >83Mhz */ |
256 | vhf = 1; | 241 | onenand_flags |= ONENAND_FLAG_VHF; |
257 | if (vhf) | 242 | else |
243 | onenand_flags &= ~ONENAND_FLAG_VHF; | ||
244 | if (onenand_flags & ONENAND_FLAG_VHF) | ||
258 | latency = 8; | 245 | latency = 8; |
259 | else if (hf) | 246 | else if (onenand_flags & ONENAND_FLAG_HF) |
260 | latency = 6; | 247 | latency = 6; |
261 | else if (gpmc_clk_ns >= 25) /* 40 MHz*/ | 248 | else if (gpmc_clk_ns >= 25) /* 40 MHz*/ |
262 | latency = 3; | 249 | latency = 3; |
263 | else | 250 | else |
264 | latency = 4; | 251 | latency = 4; |
265 | 252 | ||
266 | if (clk_dep) { | 253 | /* Set synchronous read timings */ |
267 | if (gpmc_clk_ns < 12) { /* >83Mhz */ | 254 | memset(&t, 0, sizeof(t)); |
268 | t_ces = 3; | ||
269 | t_avds = 4; | ||
270 | } else if (gpmc_clk_ns < 15) { /* >66Mhz */ | ||
271 | t_ces = 5; | ||
272 | t_avds = 4; | ||
273 | } else if (gpmc_clk_ns < 25) { /* >40Mhz */ | ||
274 | t_ces = 6; | ||
275 | t_avds = 5; | ||
276 | } else { | ||
277 | t_ces = 7; | ||
278 | t_avds = 7; | ||
279 | } | ||
280 | } | ||
281 | |||
282 | if (first_time) | ||
283 | set_onenand_cfg(onenand_base, latency, | ||
284 | sync_read, sync_write, hf, vhf); | ||
285 | 255 | ||
286 | if (div == 1) { | 256 | if (div == 1) { |
287 | reg = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG2); | 257 | reg = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG2); |
@@ -307,8 +277,6 @@ static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg, | |||
307 | gpmc_cs_write_reg(cs, GPMC_CS_CONFIG4, reg); | 277 | gpmc_cs_write_reg(cs, GPMC_CS_CONFIG4, reg); |
308 | } | 278 | } |
309 | 279 | ||
310 | /* Set synchronous read timings */ | ||
311 | memset(&t, 0, sizeof(t)); | ||
312 | t.sync_clk = min_gpmc_clk_period; | 280 | t.sync_clk = min_gpmc_clk_period; |
313 | t.cs_on = 0; | 281 | t.cs_on = 0; |
314 | t.adv_on = 0; | 282 | t.adv_on = 0; |
@@ -330,7 +298,7 @@ static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg, | |||
330 | ticks_cez); | 298 | ticks_cez); |
331 | 299 | ||
332 | /* Write */ | 300 | /* Write */ |
333 | if (sync_write) { | 301 | if (onenand_flags & ONENAND_FLAG_SYNCWRITE) { |
334 | t.adv_wr_off = t.adv_rd_off; | 302 | t.adv_wr_off = t.adv_rd_off; |
335 | t.we_on = 0; | 303 | t.we_on = 0; |
336 | t.we_off = t.cs_rd_off; | 304 | t.we_off = t.cs_rd_off; |
@@ -355,6 +323,14 @@ static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg, | |||
355 | } | 323 | } |
356 | } | 324 | } |
357 | 325 | ||
326 | return t; | ||
327 | } | ||
328 | |||
329 | static int gpmc_set_sync_mode(int cs, struct gpmc_timings *t) | ||
330 | { | ||
331 | unsigned sync_read = onenand_flags & ONENAND_FLAG_SYNCREAD; | ||
332 | unsigned sync_write = onenand_flags & ONENAND_FLAG_SYNCWRITE; | ||
333 | |||
358 | /* Configure GPMC for synchronous read */ | 334 | /* Configure GPMC for synchronous read */ |
359 | gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, | 335 | gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, |
360 | GPMC_CONFIG1_WRAPBURST_SUPP | | 336 | GPMC_CONFIG1_WRAPBURST_SUPP | |
@@ -371,11 +347,45 @@ static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg, | |||
371 | GPMC_CONFIG1_DEVICETYPE_NOR | | 347 | GPMC_CONFIG1_DEVICETYPE_NOR | |
372 | GPMC_CONFIG1_MUXADDDATA); | 348 | GPMC_CONFIG1_MUXADDDATA); |
373 | 349 | ||
374 | err = gpmc_cs_set_timings(cs, &t); | 350 | return gpmc_cs_set_timings(cs, t); |
375 | if (err) | 351 | } |
376 | return err; | 352 | |
353 | static int omap2_onenand_setup_async(void __iomem *onenand_base) | ||
354 | { | ||
355 | struct gpmc_timings t; | ||
356 | int ret; | ||
357 | |||
358 | omap2_onenand_set_async_mode(onenand_base); | ||
377 | 359 | ||
378 | set_onenand_cfg(onenand_base, latency, sync_read, sync_write, hf, vhf); | 360 | t = omap2_onenand_calc_async_timings(); |
361 | |||
362 | ret = gpmc_set_async_mode(gpmc_onenand_data->cs, &t); | ||
363 | if (IS_ERR_VALUE(ret)) | ||
364 | return ret; | ||
365 | |||
366 | omap2_onenand_set_async_mode(onenand_base); | ||
367 | |||
368 | return 0; | ||
369 | } | ||
370 | |||
371 | static int omap2_onenand_setup_sync(void __iomem *onenand_base, int *freq_ptr) | ||
372 | { | ||
373 | int ret, freq = *freq_ptr; | ||
374 | struct gpmc_timings t; | ||
375 | |||
376 | if (!freq) { | ||
377 | /* Very first call freq is not known */ | ||
378 | freq = omap2_onenand_get_freq(gpmc_onenand_data, onenand_base); | ||
379 | set_onenand_cfg(onenand_base); | ||
380 | } | ||
381 | |||
382 | t = omap2_onenand_calc_sync_timings(gpmc_onenand_data, freq); | ||
383 | |||
384 | ret = gpmc_set_sync_mode(gpmc_onenand_data->cs, &t); | ||
385 | if (IS_ERR_VALUE(ret)) | ||
386 | return ret; | ||
387 | |||
388 | set_onenand_cfg(onenand_base); | ||
379 | 389 | ||
380 | *freq_ptr = freq; | 390 | *freq_ptr = freq; |
381 | 391 | ||
@@ -385,15 +395,22 @@ static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg, | |||
385 | static int gpmc_onenand_setup(void __iomem *onenand_base, int *freq_ptr) | 395 | static int gpmc_onenand_setup(void __iomem *onenand_base, int *freq_ptr) |
386 | { | 396 | { |
387 | struct device *dev = &gpmc_onenand_device.dev; | 397 | struct device *dev = &gpmc_onenand_device.dev; |
398 | unsigned l = ONENAND_SYNC_READ | ONENAND_SYNC_READWRITE; | ||
399 | int ret; | ||
388 | 400 | ||
389 | /* Set sync timings in GPMC */ | 401 | ret = omap2_onenand_setup_async(onenand_base); |
390 | if (omap2_onenand_set_sync_mode(gpmc_onenand_data, onenand_base, | 402 | if (ret) { |
391 | freq_ptr) < 0) { | 403 | dev_err(dev, "unable to set to async mode\n"); |
392 | dev_err(dev, "Unable to set synchronous mode\n"); | 404 | return ret; |
393 | return -EINVAL; | ||
394 | } | 405 | } |
395 | 406 | ||
396 | return 0; | 407 | if (!(gpmc_onenand_data->flags & l)) |
408 | return 0; | ||
409 | |||
410 | ret = omap2_onenand_setup_sync(onenand_base, freq_ptr); | ||
411 | if (ret) | ||
412 | dev_err(dev, "unable to set to sync mode\n"); | ||
413 | return ret; | ||
397 | } | 414 | } |
398 | 415 | ||
399 | void __init gpmc_onenand_init(struct omap_onenand_platform_data *_onenand_data) | 416 | void __init gpmc_onenand_init(struct omap_onenand_platform_data *_onenand_data) |
@@ -411,6 +428,11 @@ void __init gpmc_onenand_init(struct omap_onenand_platform_data *_onenand_data) | |||
411 | gpmc_onenand_data->flags |= ONENAND_SYNC_READ; | 428 | gpmc_onenand_data->flags |= ONENAND_SYNC_READ; |
412 | } | 429 | } |
413 | 430 | ||
431 | if (cpu_is_omap34xx()) | ||
432 | gpmc_onenand_data->flags |= ONENAND_IN_OMAP34XX; | ||
433 | else | ||
434 | gpmc_onenand_data->flags &= ~ONENAND_IN_OMAP34XX; | ||
435 | |||
414 | err = gpmc_cs_request(gpmc_onenand_data->cs, ONENAND_IO_SIZE, | 436 | err = gpmc_cs_request(gpmc_onenand_data->cs, ONENAND_IO_SIZE, |
415 | (unsigned long *)&gpmc_onenand_resource.start); | 437 | (unsigned long *)&gpmc_onenand_resource.start); |
416 | if (err < 0) { | 438 | if (err < 0) { |
diff --git a/arch/arm/mach-omap2/gpmc-onenand.h b/arch/arm/mach-omap2/gpmc-onenand.h new file mode 100644 index 000000000000..216f23a8b45c --- /dev/null +++ b/arch/arm/mach-omap2/gpmc-onenand.h | |||
@@ -0,0 +1,24 @@ | |||
1 | /* | ||
2 | * arch/arm/mach-omap2/gpmc-onenand.h | ||
3 | * | ||
4 | * This program is free software; you can redistribute it and/or modify it | ||
5 | * under the terms of the GNU General Public License as published by the | ||
6 | * Free Software Foundation; either version 2 of the License, or (at your | ||
7 | * option) any later version. | ||
8 | */ | ||
9 | |||
10 | #ifndef __OMAP2_GPMC_ONENAND_H | ||
11 | #define __OMAP2_GPMC_ONENAND_H | ||
12 | |||
13 | #include <linux/platform_data/mtd-onenand-omap2.h> | ||
14 | |||
15 | #if IS_ENABLED(CONFIG_MTD_ONENAND_OMAP2) | ||
16 | extern void gpmc_onenand_init(struct omap_onenand_platform_data *d); | ||
17 | #else | ||
18 | #define board_onenand_data NULL | ||
19 | static inline void gpmc_onenand_init(struct omap_onenand_platform_data *d) | ||
20 | { | ||
21 | } | ||
22 | #endif | ||
23 | |||
24 | #endif | ||
diff --git a/arch/arm/mach-omap2/gpmc-smc91x.c b/arch/arm/mach-omap2/gpmc-smc91x.c index 565475310374..6eed907d594c 100644 --- a/arch/arm/mach-omap2/gpmc-smc91x.c +++ b/arch/arm/mach-omap2/gpmc-smc91x.c | |||
@@ -17,7 +17,7 @@ | |||
17 | #include <linux/io.h> | 17 | #include <linux/io.h> |
18 | #include <linux/smc91x.h> | 18 | #include <linux/smc91x.h> |
19 | 19 | ||
20 | #include <plat/gpmc.h> | 20 | #include "gpmc.h" |
21 | #include "gpmc-smc91x.h" | 21 | #include "gpmc-smc91x.h" |
22 | 22 | ||
23 | #include "soc.h" | 23 | #include "soc.h" |
diff --git a/arch/arm/mach-omap2/gpmc-smsc911x.c b/arch/arm/mach-omap2/gpmc-smsc911x.c index 249a0b440cd6..ef990118d32b 100644 --- a/arch/arm/mach-omap2/gpmc-smsc911x.c +++ b/arch/arm/mach-omap2/gpmc-smsc911x.c | |||
@@ -20,7 +20,7 @@ | |||
20 | #include <linux/io.h> | 20 | #include <linux/io.h> |
21 | #include <linux/smsc911x.h> | 21 | #include <linux/smsc911x.h> |
22 | 22 | ||
23 | #include <plat/gpmc.h> | 23 | #include "gpmc.h" |
24 | #include "gpmc-smsc911x.h" | 24 | #include "gpmc-smsc911x.h" |
25 | 25 | ||
26 | static struct resource gpmc_smsc911x_resources[] = { | 26 | static struct resource gpmc_smsc911x_resources[] = { |
diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index 5ac5cf30406a..f14bd3f55218 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c | |||
@@ -26,16 +26,17 @@ | |||
26 | #include <linux/interrupt.h> | 26 | #include <linux/interrupt.h> |
27 | #include <linux/platform_device.h> | 27 | #include <linux/platform_device.h> |
28 | 28 | ||
29 | #include <linux/platform_data/mtd-nand-omap2.h> | ||
30 | |||
29 | #include <asm/mach-types.h> | 31 | #include <asm/mach-types.h> |
30 | #include <plat/gpmc.h> | ||
31 | 32 | ||
32 | #include <plat/cpu.h> | 33 | #include <plat/cpu.h> |
33 | #include <plat/gpmc.h> | ||
34 | #include <plat/sdrc.h> | 34 | #include <plat/sdrc.h> |
35 | #include <plat/omap_device.h> | 35 | #include <plat/omap_device.h> |
36 | 36 | ||
37 | #include "soc.h" | 37 | #include "soc.h" |
38 | #include "common.h" | 38 | #include "common.h" |
39 | #include "gpmc.h" | ||
39 | 40 | ||
40 | #define DEVICE_NAME "omap-gpmc" | 41 | #define DEVICE_NAME "omap-gpmc" |
41 | 42 | ||
@@ -59,6 +60,9 @@ | |||
59 | #define GPMC_ECC_SIZE_CONFIG 0x1fc | 60 | #define GPMC_ECC_SIZE_CONFIG 0x1fc |
60 | #define GPMC_ECC1_RESULT 0x200 | 61 | #define GPMC_ECC1_RESULT 0x200 |
61 | #define GPMC_ECC_BCH_RESULT_0 0x240 /* not available on OMAP2 */ | 62 | #define GPMC_ECC_BCH_RESULT_0 0x240 /* not available on OMAP2 */ |
63 | #define GPMC_ECC_BCH_RESULT_1 0x244 /* not available on OMAP2 */ | ||
64 | #define GPMC_ECC_BCH_RESULT_2 0x248 /* not available on OMAP2 */ | ||
65 | #define GPMC_ECC_BCH_RESULT_3 0x24c /* not available on OMAP2 */ | ||
62 | 66 | ||
63 | /* GPMC ECC control settings */ | 67 | /* GPMC ECC control settings */ |
64 | #define GPMC_ECC_CTRL_ECCCLEAR 0x100 | 68 | #define GPMC_ECC_CTRL_ECCCLEAR 0x100 |
@@ -75,6 +79,7 @@ | |||
75 | 79 | ||
76 | #define GPMC_CS0_OFFSET 0x60 | 80 | #define GPMC_CS0_OFFSET 0x60 |
77 | #define GPMC_CS_SIZE 0x30 | 81 | #define GPMC_CS_SIZE 0x30 |
82 | #define GPMC_BCH_SIZE 0x10 | ||
78 | 83 | ||
79 | #define GPMC_MEM_START 0x00000000 | 84 | #define GPMC_MEM_START 0x00000000 |
80 | #define GPMC_MEM_END 0x3FFFFFFF | 85 | #define GPMC_MEM_END 0x3FFFFFFF |
@@ -137,7 +142,6 @@ static struct resource gpmc_mem_root; | |||
137 | static struct resource gpmc_cs_mem[GPMC_CS_NUM]; | 142 | static struct resource gpmc_cs_mem[GPMC_CS_NUM]; |
138 | static DEFINE_SPINLOCK(gpmc_mem_lock); | 143 | static DEFINE_SPINLOCK(gpmc_mem_lock); |
139 | static unsigned int gpmc_cs_map; /* flag for cs which are initialized */ | 144 | static unsigned int gpmc_cs_map; /* flag for cs which are initialized */ |
140 | static int gpmc_ecc_used = -EINVAL; /* cs using ecc engine */ | ||
141 | static struct device *gpmc_dev; | 145 | static struct device *gpmc_dev; |
142 | static int gpmc_irq; | 146 | static int gpmc_irq; |
143 | static resource_size_t phys_base, mem_size; | 147 | static resource_size_t phys_base, mem_size; |
@@ -158,22 +162,6 @@ static u32 gpmc_read_reg(int idx) | |||
158 | return __raw_readl(gpmc_base + idx); | 162 | return __raw_readl(gpmc_base + idx); |
159 | } | 163 | } |
160 | 164 | ||
161 | static void gpmc_cs_write_byte(int cs, int idx, u8 val) | ||
162 | { | ||
163 | void __iomem *reg_addr; | ||
164 | |||
165 | reg_addr = gpmc_base + GPMC_CS0_OFFSET + (cs * GPMC_CS_SIZE) + idx; | ||
166 | __raw_writeb(val, reg_addr); | ||
167 | } | ||
168 | |||
169 | static u8 gpmc_cs_read_byte(int cs, int idx) | ||
170 | { | ||
171 | void __iomem *reg_addr; | ||
172 | |||
173 | reg_addr = gpmc_base + GPMC_CS0_OFFSET + (cs * GPMC_CS_SIZE) + idx; | ||
174 | return __raw_readb(reg_addr); | ||
175 | } | ||
176 | |||
177 | void gpmc_cs_write_reg(int cs, int idx, u32 val) | 165 | void gpmc_cs_write_reg(int cs, int idx, u32 val) |
178 | { | 166 | { |
179 | void __iomem *reg_addr; | 167 | void __iomem *reg_addr; |
@@ -288,7 +276,7 @@ static int set_gpmc_timing_reg(int cs, int reg, int st_bit, int end_bit, | |||
288 | return -1 | 276 | return -1 |
289 | #endif | 277 | #endif |
290 | 278 | ||
291 | int gpmc_cs_calc_divider(int cs, unsigned int sync_clk) | 279 | int gpmc_calc_divider(unsigned int sync_clk) |
292 | { | 280 | { |
293 | int div; | 281 | int div; |
294 | u32 l; | 282 | u32 l; |
@@ -308,7 +296,7 @@ int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t) | |||
308 | int div; | 296 | int div; |
309 | u32 l; | 297 | u32 l; |
310 | 298 | ||
311 | div = gpmc_cs_calc_divider(cs, t->sync_clk); | 299 | div = gpmc_calc_divider(t->sync_clk); |
312 | if (div < 0) | 300 | if (div < 0) |
313 | return div; | 301 | return div; |
314 | 302 | ||
@@ -509,44 +497,6 @@ void gpmc_cs_free(int cs) | |||
509 | EXPORT_SYMBOL(gpmc_cs_free); | 497 | EXPORT_SYMBOL(gpmc_cs_free); |
510 | 498 | ||
511 | /** | 499 | /** |
512 | * gpmc_read_status - read access request to get the different gpmc status | ||
513 | * @cmd: command type | ||
514 | * @return status | ||
515 | */ | ||
516 | int gpmc_read_status(int cmd) | ||
517 | { | ||
518 | int status = -EINVAL; | ||
519 | u32 regval = 0; | ||
520 | |||
521 | switch (cmd) { | ||
522 | case GPMC_GET_IRQ_STATUS: | ||
523 | status = gpmc_read_reg(GPMC_IRQSTATUS); | ||
524 | break; | ||
525 | |||
526 | case GPMC_PREFETCH_FIFO_CNT: | ||
527 | regval = gpmc_read_reg(GPMC_PREFETCH_STATUS); | ||
528 | status = GPMC_PREFETCH_STATUS_FIFO_CNT(regval); | ||
529 | break; | ||
530 | |||
531 | case GPMC_PREFETCH_COUNT: | ||
532 | regval = gpmc_read_reg(GPMC_PREFETCH_STATUS); | ||
533 | status = GPMC_PREFETCH_STATUS_COUNT(regval); | ||
534 | break; | ||
535 | |||
536 | case GPMC_STATUS_BUFFER: | ||
537 | regval = gpmc_read_reg(GPMC_STATUS); | ||
538 | /* 1 : buffer is available to write */ | ||
539 | status = regval & GPMC_STATUS_BUFF_EMPTY; | ||
540 | break; | ||
541 | |||
542 | default: | ||
543 | printk(KERN_ERR "gpmc_read_status: Not supported\n"); | ||
544 | } | ||
545 | return status; | ||
546 | } | ||
547 | EXPORT_SYMBOL(gpmc_read_status); | ||
548 | |||
549 | /** | ||
550 | * gpmc_cs_configure - write request to configure gpmc | 500 | * gpmc_cs_configure - write request to configure gpmc |
551 | * @cs: chip select number | 501 | * @cs: chip select number |
552 | * @cmd: command type | 502 | * @cmd: command type |
@@ -614,121 +564,10 @@ int gpmc_cs_configure(int cs, int cmd, int wval) | |||
614 | } | 564 | } |
615 | EXPORT_SYMBOL(gpmc_cs_configure); | 565 | EXPORT_SYMBOL(gpmc_cs_configure); |
616 | 566 | ||
617 | /** | ||
618 | * gpmc_nand_read - nand specific read access request | ||
619 | * @cs: chip select number | ||
620 | * @cmd: command type | ||
621 | */ | ||
622 | int gpmc_nand_read(int cs, int cmd) | ||
623 | { | ||
624 | int rval = -EINVAL; | ||
625 | |||
626 | switch (cmd) { | ||
627 | case GPMC_NAND_DATA: | ||
628 | rval = gpmc_cs_read_byte(cs, GPMC_CS_NAND_DATA); | ||
629 | break; | ||
630 | |||
631 | default: | ||
632 | printk(KERN_ERR "gpmc_read_nand_ctrl: Not supported\n"); | ||
633 | } | ||
634 | return rval; | ||
635 | } | ||
636 | EXPORT_SYMBOL(gpmc_nand_read); | ||
637 | |||
638 | /** | ||
639 | * gpmc_nand_write - nand specific write request | ||
640 | * @cs: chip select number | ||
641 | * @cmd: command type | ||
642 | * @wval: value to write | ||
643 | */ | ||
644 | int gpmc_nand_write(int cs, int cmd, int wval) | ||
645 | { | ||
646 | int err = 0; | ||
647 | |||
648 | switch (cmd) { | ||
649 | case GPMC_NAND_COMMAND: | ||
650 | gpmc_cs_write_byte(cs, GPMC_CS_NAND_COMMAND, wval); | ||
651 | break; | ||
652 | |||
653 | case GPMC_NAND_ADDRESS: | ||
654 | gpmc_cs_write_byte(cs, GPMC_CS_NAND_ADDRESS, wval); | ||
655 | break; | ||
656 | |||
657 | case GPMC_NAND_DATA: | ||
658 | gpmc_cs_write_byte(cs, GPMC_CS_NAND_DATA, wval); | ||
659 | |||
660 | default: | ||
661 | printk(KERN_ERR "gpmc_write_nand_ctrl: Not supported\n"); | ||
662 | err = -EINVAL; | ||
663 | } | ||
664 | return err; | ||
665 | } | ||
666 | EXPORT_SYMBOL(gpmc_nand_write); | ||
667 | |||
668 | |||
669 | |||
670 | /** | ||
671 | * gpmc_prefetch_enable - configures and starts prefetch transfer | ||
672 | * @cs: cs (chip select) number | ||
673 | * @fifo_th: fifo threshold to be used for read/ write | ||
674 | * @dma_mode: dma mode enable (1) or disable (0) | ||
675 | * @u32_count: number of bytes to be transferred | ||
676 | * @is_write: prefetch read(0) or write post(1) mode | ||
677 | */ | ||
678 | int gpmc_prefetch_enable(int cs, int fifo_th, int dma_mode, | ||
679 | unsigned int u32_count, int is_write) | ||
680 | { | ||
681 | |||
682 | if (fifo_th > PREFETCH_FIFOTHRESHOLD_MAX) { | ||
683 | pr_err("gpmc: fifo threshold is not supported\n"); | ||
684 | return -1; | ||
685 | } else if (!(gpmc_read_reg(GPMC_PREFETCH_CONTROL))) { | ||
686 | /* Set the amount of bytes to be prefetched */ | ||
687 | gpmc_write_reg(GPMC_PREFETCH_CONFIG2, u32_count); | ||
688 | |||
689 | /* Set dma/mpu mode, the prefetch read / post write and | ||
690 | * enable the engine. Set which cs is has requested for. | ||
691 | */ | ||
692 | gpmc_write_reg(GPMC_PREFETCH_CONFIG1, ((cs << CS_NUM_SHIFT) | | ||
693 | PREFETCH_FIFOTHRESHOLD(fifo_th) | | ||
694 | ENABLE_PREFETCH | | ||
695 | (dma_mode << DMA_MPU_MODE) | | ||
696 | (0x1 & is_write))); | ||
697 | |||
698 | /* Start the prefetch engine */ | ||
699 | gpmc_write_reg(GPMC_PREFETCH_CONTROL, 0x1); | ||
700 | } else { | ||
701 | return -EBUSY; | ||
702 | } | ||
703 | |||
704 | return 0; | ||
705 | } | ||
706 | EXPORT_SYMBOL(gpmc_prefetch_enable); | ||
707 | |||
708 | /** | ||
709 | * gpmc_prefetch_reset - disables and stops the prefetch engine | ||
710 | */ | ||
711 | int gpmc_prefetch_reset(int cs) | ||
712 | { | ||
713 | u32 config1; | ||
714 | |||
715 | /* check if the same module/cs is trying to reset */ | ||
716 | config1 = gpmc_read_reg(GPMC_PREFETCH_CONFIG1); | ||
717 | if (((config1 >> CS_NUM_SHIFT) & 0x7) != cs) | ||
718 | return -EINVAL; | ||
719 | |||
720 | /* Stop the PFPW engine */ | ||
721 | gpmc_write_reg(GPMC_PREFETCH_CONTROL, 0x0); | ||
722 | |||
723 | /* Reset/disable the PFPW engine */ | ||
724 | gpmc_write_reg(GPMC_PREFETCH_CONFIG1, 0x0); | ||
725 | |||
726 | return 0; | ||
727 | } | ||
728 | EXPORT_SYMBOL(gpmc_prefetch_reset); | ||
729 | |||
730 | void gpmc_update_nand_reg(struct gpmc_nand_regs *reg, int cs) | 567 | void gpmc_update_nand_reg(struct gpmc_nand_regs *reg, int cs) |
731 | { | 568 | { |
569 | int i; | ||
570 | |||
732 | reg->gpmc_status = gpmc_base + GPMC_STATUS; | 571 | reg->gpmc_status = gpmc_base + GPMC_STATUS; |
733 | reg->gpmc_nand_command = gpmc_base + GPMC_CS0_OFFSET + | 572 | reg->gpmc_nand_command = gpmc_base + GPMC_CS0_OFFSET + |
734 | GPMC_CS_NAND_COMMAND + GPMC_CS_SIZE * cs; | 573 | GPMC_CS_NAND_COMMAND + GPMC_CS_SIZE * cs; |
@@ -744,7 +583,17 @@ void gpmc_update_nand_reg(struct gpmc_nand_regs *reg, int cs) | |||
744 | reg->gpmc_ecc_control = gpmc_base + GPMC_ECC_CONTROL; | 583 | reg->gpmc_ecc_control = gpmc_base + GPMC_ECC_CONTROL; |
745 | reg->gpmc_ecc_size_config = gpmc_base + GPMC_ECC_SIZE_CONFIG; | 584 | reg->gpmc_ecc_size_config = gpmc_base + GPMC_ECC_SIZE_CONFIG; |
746 | reg->gpmc_ecc1_result = gpmc_base + GPMC_ECC1_RESULT; | 585 | reg->gpmc_ecc1_result = gpmc_base + GPMC_ECC1_RESULT; |
747 | reg->gpmc_bch_result0 = gpmc_base + GPMC_ECC_BCH_RESULT_0; | 586 | |
587 | for (i = 0; i < GPMC_BCH_NUM_REMAINDER; i++) { | ||
588 | reg->gpmc_bch_result0[i] = gpmc_base + GPMC_ECC_BCH_RESULT_0 + | ||
589 | GPMC_BCH_SIZE * i; | ||
590 | reg->gpmc_bch_result1[i] = gpmc_base + GPMC_ECC_BCH_RESULT_1 + | ||
591 | GPMC_BCH_SIZE * i; | ||
592 | reg->gpmc_bch_result2[i] = gpmc_base + GPMC_ECC_BCH_RESULT_2 + | ||
593 | GPMC_BCH_SIZE * i; | ||
594 | reg->gpmc_bch_result3[i] = gpmc_base + GPMC_ECC_BCH_RESULT_3 + | ||
595 | GPMC_BCH_SIZE * i; | ||
596 | } | ||
748 | } | 597 | } |
749 | 598 | ||
750 | int gpmc_get_client_irq(unsigned irq_config) | 599 | int gpmc_get_client_irq(unsigned irq_config) |
@@ -1079,267 +928,3 @@ void omap3_gpmc_restore_context(void) | |||
1079 | } | 928 | } |
1080 | } | 929 | } |
1081 | #endif /* CONFIG_ARCH_OMAP3 */ | 930 | #endif /* CONFIG_ARCH_OMAP3 */ |
1082 | |||
1083 | /** | ||
1084 | * gpmc_enable_hwecc - enable hardware ecc functionality | ||
1085 | * @cs: chip select number | ||
1086 | * @mode: read/write mode | ||
1087 | * @dev_width: device bus width(1 for x16, 0 for x8) | ||
1088 | * @ecc_size: bytes for which ECC will be generated | ||
1089 | */ | ||
1090 | int gpmc_enable_hwecc(int cs, int mode, int dev_width, int ecc_size) | ||
1091 | { | ||
1092 | unsigned int val; | ||
1093 | |||
1094 | /* check if ecc module is in used */ | ||
1095 | if (gpmc_ecc_used != -EINVAL) | ||
1096 | return -EINVAL; | ||
1097 | |||
1098 | gpmc_ecc_used = cs; | ||
1099 | |||
1100 | /* clear ecc and enable bits */ | ||
1101 | gpmc_write_reg(GPMC_ECC_CONTROL, | ||
1102 | GPMC_ECC_CTRL_ECCCLEAR | | ||
1103 | GPMC_ECC_CTRL_ECCREG1); | ||
1104 | |||
1105 | /* program ecc and result sizes */ | ||
1106 | val = ((((ecc_size >> 1) - 1) << 22) | (0x0000000F)); | ||
1107 | gpmc_write_reg(GPMC_ECC_SIZE_CONFIG, val); | ||
1108 | |||
1109 | switch (mode) { | ||
1110 | case GPMC_ECC_READ: | ||
1111 | case GPMC_ECC_WRITE: | ||
1112 | gpmc_write_reg(GPMC_ECC_CONTROL, | ||
1113 | GPMC_ECC_CTRL_ECCCLEAR | | ||
1114 | GPMC_ECC_CTRL_ECCREG1); | ||
1115 | break; | ||
1116 | case GPMC_ECC_READSYN: | ||
1117 | gpmc_write_reg(GPMC_ECC_CONTROL, | ||
1118 | GPMC_ECC_CTRL_ECCCLEAR | | ||
1119 | GPMC_ECC_CTRL_ECCDISABLE); | ||
1120 | break; | ||
1121 | default: | ||
1122 | printk(KERN_INFO "Error: Unrecognized Mode[%d]!\n", mode); | ||
1123 | break; | ||
1124 | } | ||
1125 | |||
1126 | /* (ECC 16 or 8 bit col) | ( CS ) | ECC Enable */ | ||
1127 | val = (dev_width << 7) | (cs << 1) | (0x1); | ||
1128 | gpmc_write_reg(GPMC_ECC_CONFIG, val); | ||
1129 | return 0; | ||
1130 | } | ||
1131 | EXPORT_SYMBOL_GPL(gpmc_enable_hwecc); | ||
1132 | |||
1133 | /** | ||
1134 | * gpmc_calculate_ecc - generate non-inverted ecc bytes | ||
1135 | * @cs: chip select number | ||
1136 | * @dat: data pointer over which ecc is computed | ||
1137 | * @ecc_code: ecc code buffer | ||
1138 | * | ||
1139 | * Using non-inverted ECC is considered ugly since writing a blank | ||
1140 | * page (padding) will clear the ECC bytes. This is not a problem as long | ||
1141 | * no one is trying to write data on the seemingly unused page. Reading | ||
1142 | * an erased page will produce an ECC mismatch between generated and read | ||
1143 | * ECC bytes that has to be dealt with separately. | ||
1144 | */ | ||
1145 | int gpmc_calculate_ecc(int cs, const u_char *dat, u_char *ecc_code) | ||
1146 | { | ||
1147 | unsigned int val = 0x0; | ||
1148 | |||
1149 | if (gpmc_ecc_used != cs) | ||
1150 | return -EINVAL; | ||
1151 | |||
1152 | /* read ecc result */ | ||
1153 | val = gpmc_read_reg(GPMC_ECC1_RESULT); | ||
1154 | *ecc_code++ = val; /* P128e, ..., P1e */ | ||
1155 | *ecc_code++ = val >> 16; /* P128o, ..., P1o */ | ||
1156 | /* P2048o, P1024o, P512o, P256o, P2048e, P1024e, P512e, P256e */ | ||
1157 | *ecc_code++ = ((val >> 8) & 0x0f) | ((val >> 20) & 0xf0); | ||
1158 | |||
1159 | gpmc_ecc_used = -EINVAL; | ||
1160 | return 0; | ||
1161 | } | ||
1162 | EXPORT_SYMBOL_GPL(gpmc_calculate_ecc); | ||
1163 | |||
1164 | #ifdef CONFIG_ARCH_OMAP3 | ||
1165 | |||
1166 | /** | ||
1167 | * gpmc_init_hwecc_bch - initialize hardware BCH ecc functionality | ||
1168 | * @cs: chip select number | ||
1169 | * @nsectors: how many 512-byte sectors to process | ||
1170 | * @nerrors: how many errors to correct per sector (4 or 8) | ||
1171 | * | ||
1172 | * This function must be executed before any call to gpmc_enable_hwecc_bch. | ||
1173 | */ | ||
1174 | int gpmc_init_hwecc_bch(int cs, int nsectors, int nerrors) | ||
1175 | { | ||
1176 | /* check if ecc module is in use */ | ||
1177 | if (gpmc_ecc_used != -EINVAL) | ||
1178 | return -EINVAL; | ||
1179 | |||
1180 | /* support only OMAP3 class */ | ||
1181 | if (!cpu_is_omap34xx()) { | ||
1182 | printk(KERN_ERR "BCH ecc is not supported on this CPU\n"); | ||
1183 | return -EINVAL; | ||
1184 | } | ||
1185 | |||
1186 | /* | ||
1187 | * For now, assume 4-bit mode is only supported on OMAP3630 ES1.x, x>=1. | ||
1188 | * Other chips may be added if confirmed to work. | ||
1189 | */ | ||
1190 | if ((nerrors == 4) && | ||
1191 | (!cpu_is_omap3630() || (GET_OMAP_REVISION() == 0))) { | ||
1192 | printk(KERN_ERR "BCH 4-bit mode is not supported on this CPU\n"); | ||
1193 | return -EINVAL; | ||
1194 | } | ||
1195 | |||
1196 | /* sanity check */ | ||
1197 | if (nsectors > 8) { | ||
1198 | printk(KERN_ERR "BCH cannot process %d sectors (max is 8)\n", | ||
1199 | nsectors); | ||
1200 | return -EINVAL; | ||
1201 | } | ||
1202 | |||
1203 | return 0; | ||
1204 | } | ||
1205 | EXPORT_SYMBOL_GPL(gpmc_init_hwecc_bch); | ||
1206 | |||
1207 | /** | ||
1208 | * gpmc_enable_hwecc_bch - enable hardware BCH ecc functionality | ||
1209 | * @cs: chip select number | ||
1210 | * @mode: read/write mode | ||
1211 | * @dev_width: device bus width(1 for x16, 0 for x8) | ||
1212 | * @nsectors: how many 512-byte sectors to process | ||
1213 | * @nerrors: how many errors to correct per sector (4 or 8) | ||
1214 | */ | ||
1215 | int gpmc_enable_hwecc_bch(int cs, int mode, int dev_width, int nsectors, | ||
1216 | int nerrors) | ||
1217 | { | ||
1218 | unsigned int val; | ||
1219 | |||
1220 | /* check if ecc module is in use */ | ||
1221 | if (gpmc_ecc_used != -EINVAL) | ||
1222 | return -EINVAL; | ||
1223 | |||
1224 | gpmc_ecc_used = cs; | ||
1225 | |||
1226 | /* clear ecc and enable bits */ | ||
1227 | gpmc_write_reg(GPMC_ECC_CONTROL, 0x1); | ||
1228 | |||
1229 | /* | ||
1230 | * When using BCH, sector size is hardcoded to 512 bytes. | ||
1231 | * Here we are using wrapping mode 6 both for reading and writing, with: | ||
1232 | * size0 = 0 (no additional protected byte in spare area) | ||
1233 | * size1 = 32 (skip 32 nibbles = 16 bytes per sector in spare area) | ||
1234 | */ | ||
1235 | gpmc_write_reg(GPMC_ECC_SIZE_CONFIG, (32 << 22) | (0 << 12)); | ||
1236 | |||
1237 | /* BCH configuration */ | ||
1238 | val = ((1 << 16) | /* enable BCH */ | ||
1239 | (((nerrors == 8) ? 1 : 0) << 12) | /* 8 or 4 bits */ | ||
1240 | (0x06 << 8) | /* wrap mode = 6 */ | ||
1241 | (dev_width << 7) | /* bus width */ | ||
1242 | (((nsectors-1) & 0x7) << 4) | /* number of sectors */ | ||
1243 | (cs << 1) | /* ECC CS */ | ||
1244 | (0x1)); /* enable ECC */ | ||
1245 | |||
1246 | gpmc_write_reg(GPMC_ECC_CONFIG, val); | ||
1247 | gpmc_write_reg(GPMC_ECC_CONTROL, 0x101); | ||
1248 | return 0; | ||
1249 | } | ||
1250 | EXPORT_SYMBOL_GPL(gpmc_enable_hwecc_bch); | ||
1251 | |||
1252 | /** | ||
1253 | * gpmc_calculate_ecc_bch4 - Generate 7 ecc bytes per sector of 512 data bytes | ||
1254 | * @cs: chip select number | ||
1255 | * @dat: The pointer to data on which ecc is computed | ||
1256 | * @ecc: The ecc output buffer | ||
1257 | */ | ||
1258 | int gpmc_calculate_ecc_bch4(int cs, const u_char *dat, u_char *ecc) | ||
1259 | { | ||
1260 | int i; | ||
1261 | unsigned long nsectors, reg, val1, val2; | ||
1262 | |||
1263 | if (gpmc_ecc_used != cs) | ||
1264 | return -EINVAL; | ||
1265 | |||
1266 | nsectors = ((gpmc_read_reg(GPMC_ECC_CONFIG) >> 4) & 0x7) + 1; | ||
1267 | |||
1268 | for (i = 0; i < nsectors; i++) { | ||
1269 | |||
1270 | reg = GPMC_ECC_BCH_RESULT_0 + 16*i; | ||
1271 | |||
1272 | /* Read hw-computed remainder */ | ||
1273 | val1 = gpmc_read_reg(reg + 0); | ||
1274 | val2 = gpmc_read_reg(reg + 4); | ||
1275 | |||
1276 | /* | ||
1277 | * Add constant polynomial to remainder, in order to get an ecc | ||
1278 | * sequence of 0xFFs for a buffer filled with 0xFFs; and | ||
1279 | * left-justify the resulting polynomial. | ||
1280 | */ | ||
1281 | *ecc++ = 0x28 ^ ((val2 >> 12) & 0xFF); | ||
1282 | *ecc++ = 0x13 ^ ((val2 >> 4) & 0xFF); | ||
1283 | *ecc++ = 0xcc ^ (((val2 & 0xF) << 4)|((val1 >> 28) & 0xF)); | ||
1284 | *ecc++ = 0x39 ^ ((val1 >> 20) & 0xFF); | ||
1285 | *ecc++ = 0x96 ^ ((val1 >> 12) & 0xFF); | ||
1286 | *ecc++ = 0xac ^ ((val1 >> 4) & 0xFF); | ||
1287 | *ecc++ = 0x7f ^ ((val1 & 0xF) << 4); | ||
1288 | } | ||
1289 | |||
1290 | gpmc_ecc_used = -EINVAL; | ||
1291 | return 0; | ||
1292 | } | ||
1293 | EXPORT_SYMBOL_GPL(gpmc_calculate_ecc_bch4); | ||
1294 | |||
1295 | /** | ||
1296 | * gpmc_calculate_ecc_bch8 - Generate 13 ecc bytes per block of 512 data bytes | ||
1297 | * @cs: chip select number | ||
1298 | * @dat: The pointer to data on which ecc is computed | ||
1299 | * @ecc: The ecc output buffer | ||
1300 | */ | ||
1301 | int gpmc_calculate_ecc_bch8(int cs, const u_char *dat, u_char *ecc) | ||
1302 | { | ||
1303 | int i; | ||
1304 | unsigned long nsectors, reg, val1, val2, val3, val4; | ||
1305 | |||
1306 | if (gpmc_ecc_used != cs) | ||
1307 | return -EINVAL; | ||
1308 | |||
1309 | nsectors = ((gpmc_read_reg(GPMC_ECC_CONFIG) >> 4) & 0x7) + 1; | ||
1310 | |||
1311 | for (i = 0; i < nsectors; i++) { | ||
1312 | |||
1313 | reg = GPMC_ECC_BCH_RESULT_0 + 16*i; | ||
1314 | |||
1315 | /* Read hw-computed remainder */ | ||
1316 | val1 = gpmc_read_reg(reg + 0); | ||
1317 | val2 = gpmc_read_reg(reg + 4); | ||
1318 | val3 = gpmc_read_reg(reg + 8); | ||
1319 | val4 = gpmc_read_reg(reg + 12); | ||
1320 | |||
1321 | /* | ||
1322 | * Add constant polynomial to remainder, in order to get an ecc | ||
1323 | * sequence of 0xFFs for a buffer filled with 0xFFs. | ||
1324 | */ | ||
1325 | *ecc++ = 0xef ^ (val4 & 0xFF); | ||
1326 | *ecc++ = 0x51 ^ ((val3 >> 24) & 0xFF); | ||
1327 | *ecc++ = 0x2e ^ ((val3 >> 16) & 0xFF); | ||
1328 | *ecc++ = 0x09 ^ ((val3 >> 8) & 0xFF); | ||
1329 | *ecc++ = 0xed ^ (val3 & 0xFF); | ||
1330 | *ecc++ = 0x93 ^ ((val2 >> 24) & 0xFF); | ||
1331 | *ecc++ = 0x9a ^ ((val2 >> 16) & 0xFF); | ||
1332 | *ecc++ = 0xc2 ^ ((val2 >> 8) & 0xFF); | ||
1333 | *ecc++ = 0x97 ^ (val2 & 0xFF); | ||
1334 | *ecc++ = 0x79 ^ ((val1 >> 24) & 0xFF); | ||
1335 | *ecc++ = 0xe5 ^ ((val1 >> 16) & 0xFF); | ||
1336 | *ecc++ = 0x24 ^ ((val1 >> 8) & 0xFF); | ||
1337 | *ecc++ = 0xb5 ^ (val1 & 0xFF); | ||
1338 | } | ||
1339 | |||
1340 | gpmc_ecc_used = -EINVAL; | ||
1341 | return 0; | ||
1342 | } | ||
1343 | EXPORT_SYMBOL_GPL(gpmc_calculate_ecc_bch8); | ||
1344 | |||
1345 | #endif /* CONFIG_ARCH_OMAP3 */ | ||
diff --git a/arch/arm/mach-omap2/gpmc.h b/arch/arm/mach-omap2/gpmc.h new file mode 100644 index 000000000000..79f4dfc2adb3 --- /dev/null +++ b/arch/arm/mach-omap2/gpmc.h | |||
@@ -0,0 +1,135 @@ | |||
1 | /* | ||
2 | * General-Purpose Memory Controller for OMAP2 | ||
3 | * | ||
4 | * Copyright (C) 2005-2006 Nokia Corporation | ||
5 | * | ||
6 | * This program is free software; you can redistribute it and/or modify | ||
7 | * it under the terms of the GNU General Public License version 2 as | ||
8 | * published by the Free Software Foundation. | ||
9 | */ | ||
10 | |||
11 | #ifndef __OMAP2_GPMC_H | ||
12 | #define __OMAP2_GPMC_H | ||
13 | |||
14 | #include <linux/platform_data/mtd-nand-omap2.h> | ||
15 | |||
16 | /* Maximum Number of Chip Selects */ | ||
17 | #define GPMC_CS_NUM 8 | ||
18 | |||
19 | #define GPMC_CS_CONFIG1 0x00 | ||
20 | #define GPMC_CS_CONFIG2 0x04 | ||
21 | #define GPMC_CS_CONFIG3 0x08 | ||
22 | #define GPMC_CS_CONFIG4 0x0c | ||
23 | #define GPMC_CS_CONFIG5 0x10 | ||
24 | #define GPMC_CS_CONFIG6 0x14 | ||
25 | #define GPMC_CS_CONFIG7 0x18 | ||
26 | #define GPMC_CS_NAND_COMMAND 0x1c | ||
27 | #define GPMC_CS_NAND_ADDRESS 0x20 | ||
28 | #define GPMC_CS_NAND_DATA 0x24 | ||
29 | |||
30 | /* Control Commands */ | ||
31 | #define GPMC_CONFIG_RDY_BSY 0x00000001 | ||
32 | #define GPMC_CONFIG_DEV_SIZE 0x00000002 | ||
33 | #define GPMC_CONFIG_DEV_TYPE 0x00000003 | ||
34 | #define GPMC_SET_IRQ_STATUS 0x00000004 | ||
35 | #define GPMC_CONFIG_WP 0x00000005 | ||
36 | |||
37 | #define GPMC_ENABLE_IRQ 0x0000000d | ||
38 | |||
39 | /* ECC commands */ | ||
40 | #define GPMC_ECC_READ 0 /* Reset Hardware ECC for read */ | ||
41 | #define GPMC_ECC_WRITE 1 /* Reset Hardware ECC for write */ | ||
42 | #define GPMC_ECC_READSYN 2 /* Reset before syndrom is read back */ | ||
43 | |||
44 | #define GPMC_CONFIG1_WRAPBURST_SUPP (1 << 31) | ||
45 | #define GPMC_CONFIG1_READMULTIPLE_SUPP (1 << 30) | ||
46 | #define GPMC_CONFIG1_READTYPE_ASYNC (0 << 29) | ||
47 | #define GPMC_CONFIG1_READTYPE_SYNC (1 << 29) | ||
48 | #define GPMC_CONFIG1_WRITEMULTIPLE_SUPP (1 << 28) | ||
49 | #define GPMC_CONFIG1_WRITETYPE_ASYNC (0 << 27) | ||
50 | #define GPMC_CONFIG1_WRITETYPE_SYNC (1 << 27) | ||
51 | #define GPMC_CONFIG1_CLKACTIVATIONTIME(val) ((val & 3) << 25) | ||
52 | #define GPMC_CONFIG1_PAGE_LEN(val) ((val & 3) << 23) | ||
53 | #define GPMC_CONFIG1_WAIT_READ_MON (1 << 22) | ||
54 | #define GPMC_CONFIG1_WAIT_WRITE_MON (1 << 21) | ||
55 | #define GPMC_CONFIG1_WAIT_MON_IIME(val) ((val & 3) << 18) | ||
56 | #define GPMC_CONFIG1_WAIT_PIN_SEL(val) ((val & 3) << 16) | ||
57 | #define GPMC_CONFIG1_DEVICESIZE(val) ((val & 3) << 12) | ||
58 | #define GPMC_CONFIG1_DEVICESIZE_16 GPMC_CONFIG1_DEVICESIZE(1) | ||
59 | #define GPMC_CONFIG1_DEVICETYPE(val) ((val & 3) << 10) | ||
60 | #define GPMC_CONFIG1_DEVICETYPE_NOR GPMC_CONFIG1_DEVICETYPE(0) | ||
61 | #define GPMC_CONFIG1_MUXADDDATA (1 << 9) | ||
62 | #define GPMC_CONFIG1_TIME_PARA_GRAN (1 << 4) | ||
63 | #define GPMC_CONFIG1_FCLK_DIV(val) (val & 3) | ||
64 | #define GPMC_CONFIG1_FCLK_DIV2 (GPMC_CONFIG1_FCLK_DIV(1)) | ||
65 | #define GPMC_CONFIG1_FCLK_DIV3 (GPMC_CONFIG1_FCLK_DIV(2)) | ||
66 | #define GPMC_CONFIG1_FCLK_DIV4 (GPMC_CONFIG1_FCLK_DIV(3)) | ||
67 | #define GPMC_CONFIG7_CSVALID (1 << 6) | ||
68 | |||
69 | #define GPMC_DEVICETYPE_NOR 0 | ||
70 | #define GPMC_DEVICETYPE_NAND 2 | ||
71 | #define GPMC_CONFIG_WRITEPROTECT 0x00000010 | ||
72 | #define WR_RD_PIN_MONITORING 0x00600000 | ||
73 | #define GPMC_IRQ_FIFOEVENTENABLE 0x01 | ||
74 | #define GPMC_IRQ_COUNT_EVENT 0x02 | ||
75 | |||
76 | |||
77 | /* | ||
78 | * Note that all values in this struct are in nanoseconds except sync_clk | ||
79 | * (which is in picoseconds), while the register values are in gpmc_fck cycles. | ||
80 | */ | ||
81 | struct gpmc_timings { | ||
82 | /* Minimum clock period for synchronous mode (in picoseconds) */ | ||
83 | u32 sync_clk; | ||
84 | |||
85 | /* Chip-select signal timings corresponding to GPMC_CS_CONFIG2 */ | ||
86 | u16 cs_on; /* Assertion time */ | ||
87 | u16 cs_rd_off; /* Read deassertion time */ | ||
88 | u16 cs_wr_off; /* Write deassertion time */ | ||
89 | |||
90 | /* ADV signal timings corresponding to GPMC_CONFIG3 */ | ||
91 | u16 adv_on; /* Assertion time */ | ||
92 | u16 adv_rd_off; /* Read deassertion time */ | ||
93 | u16 adv_wr_off; /* Write deassertion time */ | ||
94 | |||
95 | /* WE signals timings corresponding to GPMC_CONFIG4 */ | ||
96 | u16 we_on; /* WE assertion time */ | ||
97 | u16 we_off; /* WE deassertion time */ | ||
98 | |||
99 | /* OE signals timings corresponding to GPMC_CONFIG4 */ | ||
100 | u16 oe_on; /* OE assertion time */ | ||
101 | u16 oe_off; /* OE deassertion time */ | ||
102 | |||
103 | /* Access time and cycle time timings corresponding to GPMC_CONFIG5 */ | ||
104 | u16 page_burst_access; /* Multiple access word delay */ | ||
105 | u16 access; /* Start-cycle to first data valid delay */ | ||
106 | u16 rd_cycle; /* Total read cycle time */ | ||
107 | u16 wr_cycle; /* Total write cycle time */ | ||
108 | |||
109 | /* The following are only on OMAP3430 */ | ||
110 | u16 wr_access; /* WRACCESSTIME */ | ||
111 | u16 wr_data_mux_bus; /* WRDATAONADMUXBUS */ | ||
112 | }; | ||
113 | |||
114 | extern void gpmc_update_nand_reg(struct gpmc_nand_regs *reg, int cs); | ||
115 | extern int gpmc_get_client_irq(unsigned irq_config); | ||
116 | |||
117 | extern unsigned int gpmc_ns_to_ticks(unsigned int time_ns); | ||
118 | extern unsigned int gpmc_ps_to_ticks(unsigned int time_ps); | ||
119 | extern unsigned int gpmc_ticks_to_ns(unsigned int ticks); | ||
120 | extern unsigned int gpmc_round_ns_to_ticks(unsigned int time_ns); | ||
121 | extern unsigned long gpmc_get_fclk_period(void); | ||
122 | |||
123 | extern void gpmc_cs_write_reg(int cs, int idx, u32 val); | ||
124 | extern u32 gpmc_cs_read_reg(int cs, int idx); | ||
125 | extern int gpmc_calc_divider(unsigned int sync_clk); | ||
126 | extern int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t); | ||
127 | extern int gpmc_cs_request(int cs, unsigned long size, unsigned long *base); | ||
128 | extern void gpmc_cs_free(int cs); | ||
129 | extern int gpmc_cs_set_reserved(int cs, int reserved); | ||
130 | extern int gpmc_cs_reserved(int cs); | ||
131 | extern void omap3_gpmc_save_context(void); | ||
132 | extern void omap3_gpmc_restore_context(void); | ||
133 | extern int gpmc_cs_configure(int cs, int cmd, int wval); | ||
134 | |||
135 | #endif | ||
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index baee8722b477..001eff290cdb 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c | |||
@@ -40,12 +40,12 @@ | |||
40 | #include "powerdomain.h" | 40 | #include "powerdomain.h" |
41 | #include <plat/sdrc.h> | 41 | #include <plat/sdrc.h> |
42 | #include <plat/prcm.h> | 42 | #include <plat/prcm.h> |
43 | #include <plat/gpmc.h> | ||
44 | #include <plat-omap/dma-omap.h> | 43 | #include <plat-omap/dma-omap.h> |
45 | 44 | ||
46 | #include "common.h" | 45 | #include "common.h" |
47 | #include "cm2xxx_3xxx.h" | 46 | #include "cm2xxx_3xxx.h" |
48 | #include "cm-regbits-34xx.h" | 47 | #include "cm-regbits-34xx.h" |
48 | #include "gpmc.h" | ||
49 | #include "prm-regbits-34xx.h" | 49 | #include "prm-regbits-34xx.h" |
50 | 50 | ||
51 | #include "prm2xxx_3xxx.h" | 51 | #include "prm2xxx_3xxx.h" |
diff --git a/arch/arm/mach-omap2/usb-tusb6010.c b/arch/arm/mach-omap2/usb-tusb6010.c index 805bea6edf17..6064425ed47b 100644 --- a/arch/arm/mach-omap2/usb-tusb6010.c +++ b/arch/arm/mach-omap2/usb-tusb6010.c | |||
@@ -18,7 +18,7 @@ | |||
18 | 18 | ||
19 | #include <linux/usb/musb.h> | 19 | #include <linux/usb/musb.h> |
20 | 20 | ||
21 | #include <plat/gpmc.h> | 21 | #include "gpmc.h" |
22 | 22 | ||
23 | #include "mux.h" | 23 | #include "mux.h" |
24 | 24 | ||