1 files changed, 82 insertions, 0 deletions

diff --git a/arch/arm/mach-omap2/usb.h b/arch/arm/mach-omap2/usb.h
new file mode 100644
index 000000000000..b2c4ff15557e
--- /dev/null
+++ b/arch/arm/mach-omap2/usb.h
@@ -0,0 +1,82 @@
+#include <plat/usb.h>
+
+/* AM35x */
+/* USB 2.0 PHY Control */
+#define CONF2_PHY_GPIOMODE      (1 << 23)
+#define CONF2_OTGMODE           (3 << 14)
+#define CONF2_NO_OVERRIDE       (0 << 14)
+#define CONF2_FORCE_HOST        (1 << 14)
+#define CONF2_FORCE_DEVICE      (2 << 14)
+#define CONF2_FORCE_HOST_VBUS_LOW (3 << 14)
+#define CONF2_SESENDEN          (1 << 13)
+#define CONF2_VBDTCTEN          (1 << 12)
+#define CONF2_REFFREQ_24MHZ     (2 << 8)
+#define CONF2_REFFREQ_26MHZ     (7 << 8)
+#define CONF2_REFFREQ_13MHZ     (6 << 8)
+#define CONF2_REFFREQ           (0xf << 8)
+#define CONF2_PHYCLKGD          (1 << 7)
+#define CONF2_VBUSSENSE         (1 << 6)
+#define CONF2_PHY_PLLON         (1 << 5)
+#define CONF2_RESET             (1 << 4)
+#define CONF2_PHYPWRDN          (1 << 3)
+#define CONF2_OTGPWRDN          (1 << 2)
+#define CONF2_DATPOL            (1 << 1)
+
+/* TI81XX specific definitions */
+#define USBCTRL0        0x620
+#define USBSTAT0        0x624
+
+/* TI816X PHY controls bits */
+#define TI816X_USBPHY0_NORMAL_MODE      (1 << 0)
+#define TI816X_USBPHY_REFCLK_OSC        (1 << 8)
+
+/* TI814X PHY controls bits */
+#define USBPHY_CM_PWRDN         (1 << 0)
+#define USBPHY_OTG_PWRDN        (1 << 1)
+#define USBPHY_CHGDET_DIS       (1 << 2)
+#define USBPHY_CHGDET_RSTRT     (1 << 3)
+#define USBPHY_SRCONDM          (1 << 4)
+#define USBPHY_SINKONDP         (1 << 5)
+#define USBPHY_CHGISINK_EN      (1 << 6)
+#define USBPHY_CHGVSRC_EN       (1 << 7)
+#define USBPHY_DMPULLUP         (1 << 8)
+#define USBPHY_DPPULLUP         (1 << 9)
+#define USBPHY_CDET_EXTCTL      (1 << 10)
+#define USBPHY_GPIO_MODE        (1 << 12)
+#define USBPHY_DPOPBUFCTL       (1 << 13)
+#define USBPHY_DMOPBUFCTL       (1 << 14)
+#define USBPHY_DPINPUT          (1 << 15)
+#define USBPHY_DMINPUT          (1 << 16)
+#define USBPHY_DPGPIO_PD        (1 << 17)
+#define USBPHY_DMGPIO_PD        (1 << 18)
+#define USBPHY_OTGVDET_EN       (1 << 19)
+#define USBPHY_OTGSESSEND_EN    (1 << 20)
+#define USBPHY_DATA_POLARITY    (1 << 23)
+
+struct usbhs_omap_board_data {
+        enum usbhs_omap_port_mode       port_mode[OMAP3_HS_USB_PORTS];
+
+        /* have to be valid if phy_reset is true and portx is in phy mode */
+        int     reset_gpio_port[OMAP3_HS_USB_PORTS];
+
+        /* Set this to true for ES2.x silicon */
+        unsigned                        es2_compatibility:1;
+
+        unsigned                        phy_reset:1;
+
+        /*
+         * Regulators for USB PHYs.
+         * Each PHY can have a separate regulator.
+         */
+        struct regulator                *regulator[OMAP3_HS_USB_PORTS];
+};
+
+extern void usb_musb_init(struct omap_musb_board_data *board_data);
+extern void usbhs_init(const struct usbhs_omap_board_data *pdata);
+
+extern void am35x_musb_reset(void);
+extern void am35x_musb_phy_power(u8 on);
+extern void am35x_musb_clear_irq(void);
+extern void am35x_set_mode(u8 musb_mode);
+extern void ti81xx_musb_phy_power(u8 on);
+