1 files changed, 321 insertions, 0 deletions

diff --git a/arch/arm/mach-omap2/sram243x.S b/arch/arm/mach-omap2/sram243x.S
new file mode 100644
index 000000000000..a3fa48dc08cd
--- /dev/null
+++ b/arch/arm/mach-omap2/sram243x.S
@@ -0,0 +1,321 @@
+/*
+ * linux/arch/arm/mach-omap2/sram243x.S
+ *
+ * Omap2 specific functions that need to be run in internal SRAM
+ *
+ * (C) Copyright 2004
+ * Texas Instruments, <www.ti.com>
+ * Richard Woodruff <r-woodruff2@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <asm/arch/io.h>
+#include <asm/hardware.h>
+
+#include "prm.h"
+#include "cm.h"
+#include "sdrc.h"
+
+        .text
+
+ENTRY(omap243x_sram_ddr_init)
+        stmfd   sp!, {r0 - r12, lr}     @ save registers on stack
+
+        mov     r12, r2                 @ capture CS1 vs CS0
+        mov     r8, r3                  @ capture force parameter
+
+        /* frequency shift down */
+        ldr     r2, omap243x_sdi_cm_clksel2_pll @ get address of dpllout reg
+        mov     r3, #0x1                @ value for 1x operation
+        str     r3, [r2]                @ go to L1-freq operation
+
+        /* voltage shift down */
+        mov r9, #0x1                    @ set up for L1 voltage call
+        bl voltage_shift                @ go drop voltage
+
+        /* dll lock mode */
+        ldr     r11, omap243x_sdi_sdrc_dlla_ctrl        @ addr of dlla ctrl
+        ldr     r10, [r11]              @ get current val
+        cmp     r12, #0x1               @ cs1 base (2422 es2.05/1)
+        addeq   r11, r11, #0x8          @ if cs1 base, move to DLLB
+        mvn     r9, #0x4                @ mask to get clear bit2
+        and     r10, r10, r9            @ clear bit2 for lock mode.
+        orr     r10, r10, #0x8          @ make sure DLL on (es2 bit pos)
+        orr     r10, r10, #0x2          @ 90 degree phase for all below 133Mhz
+        str     r10, [r11]              @ commit to DLLA_CTRL
+        bl      i_dll_wait              @ wait for dll to lock
+
+        /* get dll value */
+        add     r11, r11, #0x4          @ get addr of status reg
+        ldr     r10, [r11]              @ get locked value
+
+        /* voltage shift up */
+        mov r9, #0x0                    @ shift back to L0-voltage
+        bl voltage_shift                @ go raise voltage
+
+        /* frequency shift up */
+        mov     r3, #0x2                @ value for 2x operation
+        str     r3, [r2]                @ go to L0-freq operation
+
+        /* reset entry mode for dllctrl */
+        sub     r11, r11, #0x4          @ move from status to ctrl
+        cmp     r12, #0x1               @ normalize if cs1 based
+        subeq   r11, r11, #0x8          @ possibly back to DLLA
+        cmp     r8, #0x1                @ if forced unlock exit
+        orreq   r1, r1, #0x4            @ make sure exit with unlocked value
+        str     r1, [r11]               @ restore DLLA_CTRL high value
+        add     r11, r11, #0x8          @ move to DLLB_CTRL addr
+        str     r1, [r11]               @ set value DLLB_CTRL
+        bl      i_dll_wait              @ wait for possible lock
+
+        /* set up for return, DDR should be good */
+        str r10, [r0]                   @ write dll_status and return counter
+        ldmfd   sp!, {r0 - r12, pc}     @ restore regs and return
+
+        /* ensure the DLL has relocked */
+i_dll_wait:
+        mov     r4, #0x800              @ delay DLL relock, min 0x400 L3 clocks
+i_dll_delay:
+        subs    r4, r4, #0x1
+        bne     i_dll_delay
+        mov     pc, lr
+
+        /*
+         * shift up or down voltage, use R9 as input to tell level.
+         * wait for it to finish, use 32k sync counter, 1tick=31uS.
+         */
+voltage_shift:
+        ldr     r4, omap243x_sdi_prcm_voltctrl  @ get addr of volt ctrl.
+        ldr     r5, [r4]                @ get value.
+        ldr     r6, prcm_mask_val       @ get value of mask
+        and     r5, r5, r6              @ apply mask to clear bits
+        orr     r5, r5, r9              @ bulld value for L0/L1-volt operation.
+        str     r5, [r4]                @ set up for change.
+        mov     r3, #0x4000             @ get val for force
+        orr     r5, r5, r3              @ build value for force
+        str     r5, [r4]                @ Force transition to L1
+
+        ldr     r3, omap243x_sdi_timer_32ksynct_cr      @ get addr of counter
+        ldr     r5, [r3]                @ get value
+        add     r5, r5, #0x3            @ give it at most 93uS
+volt_delay:
+        ldr     r7, [r3]                @ get timer value
+        cmp     r5, r7                  @ time up?
+        bhi     volt_delay              @ not yet->branch
+        mov     pc, lr                  @ back to caller.
+
+omap243x_sdi_cm_clksel2_pll:
+        .word OMAP2430_CM_REGADDR(PLL_MOD, CM_CLKSEL2)
+omap243x_sdi_sdrc_dlla_ctrl:
+        .word OMAP243X_SDRC_REGADDR(SDRC_DLLA_CTRL)
+omap243x_sdi_prcm_voltctrl:
+        .word OMAP243X_PRCM_VOLTCTRL
+prcm_mask_val:
+        .word 0xFFFF3FFC
+omap243x_sdi_timer_32ksynct_cr:
+        .word IO_ADDRESS(OMAP2_32KSYNCT_BASE + 0x010)
+ENTRY(omap243x_sram_ddr_init_sz)
+        .word   . - omap243x_sram_ddr_init
+
+/*
+ * Reprograms memory timings.
+ * r0 = [PRCM_FULL | PRCM_HALF] r1 = SDRC_DLLA_CTRL value r2 = [DDR | SDR]
+ * PRCM_FULL = 2, PRCM_HALF = 1, DDR = 1, SDR = 0
+ */
+ENTRY(omap243x_sram_reprogram_sdrc)
+        stmfd   sp!, {r0 - r10, lr}     @ save registers on stack
+        mov     r3, #0x0                @ clear for mrc call
+        mcr     p15, 0, r3, c7, c10, 4  @ memory barrier, finish ARM SDR/DDR
+        nop
+        nop
+        ldr     r6, omap243x_srs_sdrc_rfr_ctrl  @ get addr of refresh reg
+        ldr     r5, [r6]                @ get value
+        mov     r5, r5, lsr #8          @ isolate rfr field and drop burst
+
+        cmp     r0, #0x1                @ going to half speed?
+        movne   r9, #0x0                @ if up set flag up for pre up, hi volt
+
+        blne    voltage_shift_c         @ adjust voltage
+
+        cmp     r0, #0x1                @ going to half speed (post branch link)
+        moveq   r5, r5, lsr #1          @ divide by 2 if to half
+        movne   r5, r5, lsl #1          @ mult by 2 if to full
+        mov     r5, r5, lsl #8          @ put rfr field back into place
+        add     r5, r5, #0x1            @ turn on burst of 1
+        ldr     r4, omap243x_srs_cm_clksel2_pll @ get address of out reg
+        ldr     r3, [r4]                @ get curr value
+        orr     r3, r3, #0x3
+        bic     r3, r3, #0x3            @ clear lower bits
+        orr     r3, r3, r0              @ new state value
+        str     r3, [r4]                @ set new state (pll/x, x=1 or 2)
+        nop
+        nop
+
+        moveq   r9, #0x1                @ if speed down, post down, drop volt
+        bleq    voltage_shift_c
+
+        mcr     p15, 0, r3, c7, c10, 4  @ memory barrier
+        str     r5, [r6]                @ set new RFR_1 value
+        add     r6, r6, #0x30           @ get RFR_2 addr
+        str     r5, [r6]                @ set RFR_2
+        nop
+        cmp     r2, #0x1                @ (SDR or DDR) do we need to adjust DLL
+        bne     freq_out                @ leave if SDR, no DLL function
+
+        /* With DDR, we need to take care of the DLL for the frequency change */
+        ldr     r2, omap243x_srs_sdrc_dlla_ctrl @ addr of dlla ctrl
+        str     r1, [r2]                @ write out new SDRC_DLLA_CTRL
+        add     r2, r2, #0x8            @ addr to SDRC_DLLB_CTRL
+        str     r1, [r2]                @ commit to SDRC_DLLB_CTRL
+        mov     r1, #0x2000             @ wait DLL relock, min 0x400 L3 clocks
+dll_wait:
+        subs    r1, r1, #0x1
+        bne     dll_wait
+freq_out:
+        ldmfd   sp!, {r0 - r10, pc}     @ restore regs and return
+
+    /*
+     * shift up or down voltage, use R9 as input to tell level.
+     *  wait for it to finish, use 32k sync counter, 1tick=31uS.
+     */
+voltage_shift_c:
+        ldr     r10, omap243x_srs_prcm_voltctrl @ get addr of volt ctrl
+        ldr     r8, [r10]               @ get value
+        ldr     r7, ddr_prcm_mask_val   @ get value of mask
+        and     r8, r8, r7              @ apply mask to clear bits
+        orr     r8, r8, r9              @ bulld value for L0/L1-volt operation.
+        str     r8, [r10]               @ set up for change.
+        mov     r7, #0x4000             @ get val for force
+        orr     r8, r8, r7              @ build value for force
+        str     r8, [r10]               @ Force transition to L1
+
+        ldr     r10, omap243x_srs_timer_32ksynct        @ get addr of counter
+        ldr     r8, [r10]               @ get value
+        add     r8, r8, #0x2            @ give it at most 62uS (min 31+)
+volt_delay_c:
+        ldr     r7, [r10]               @ get timer value
+        cmp     r8, r7                  @ time up?
+        bhi     volt_delay_c            @ not yet->branch
+        mov     pc, lr                  @ back to caller
+
+omap243x_srs_cm_clksel2_pll:
+        .word OMAP2430_CM_REGADDR(PLL_MOD, CM_CLKSEL2)
+omap243x_srs_sdrc_dlla_ctrl:
+        .word OMAP243X_SDRC_REGADDR(SDRC_DLLA_CTRL)
+omap243x_srs_sdrc_rfr_ctrl:
+        .word OMAP243X_SDRC_REGADDR(SDRC_RFR_CTRL_0)
+omap243x_srs_prcm_voltctrl:
+        .word OMAP243X_PRCM_VOLTCTRL
+ddr_prcm_mask_val:
+        .word 0xFFFF3FFC
+omap243x_srs_timer_32ksynct:
+        .word IO_ADDRESS(OMAP2_32KSYNCT_BASE + 0x010)
+
+ENTRY(omap243x_sram_reprogram_sdrc_sz)
+        .word   . - omap243x_sram_reprogram_sdrc
+
+/*
+ * Set dividers and pll. Also recalculate DLL value for DDR and unlock mode.
+ */
+ENTRY(omap243x_sram_set_prcm)
+        stmfd   sp!, {r0-r12, lr}       @ regs to stack
+        adr     r4, pbegin              @ addr of preload start
+        adr     r8, pend                @ addr of preload end
+        mcrr    p15, 1, r8, r4, c12     @ preload into icache
+pbegin:
+        /* move into fast relock bypass */
+        ldr     r8, omap243x_ssp_pll_ctl        @ get addr
+        ldr     r5, [r8]                @ get val
+        mvn     r6, #0x3                @ clear mask
+        and     r5, r5, r6              @ clear field
+        orr     r7, r5, #0x2            @ fast relock val
+        str     r7, [r8]                @ go to fast relock
+        ldr     r4, omap243x_ssp_pll_stat       @ addr of stat
+block:
+        /* wait for bypass */
+        ldr     r8, [r4]                @ stat value
+        and     r8, r8, #0x3            @ mask for stat
+        cmp     r8, #0x1                @ there yet
+        bne     block                   @ loop if not
+
+        /* set new dpll dividers _after_ in bypass */
+        ldr     r4, omap243x_ssp_pll_div        @ get addr
+        str     r0, [r4]                @ set dpll ctrl val
+
+        ldr     r4, omap243x_ssp_set_config     @ get addr
+        mov     r8, #1                  @ valid cfg msk
+        str     r8, [r4]                @ make dividers take
+
+        mov     r4, #100                @ dead spin a bit
+wait_a_bit:
+        subs    r4, r4, #1              @ dec loop
+        bne     wait_a_bit              @ delay done?
+
+        /* check if staying in bypass */
+        cmp     r2, #0x1                @ stay in bypass?
+        beq     pend                    @ jump over dpll relock
+
+        /* relock DPLL with new vals */
+        ldr     r5, omap243x_ssp_pll_stat       @ get addr
+        ldr     r4, omap243x_ssp_pll_ctl        @ get addr
+        orr     r8, r7, #0x3            @ val for lock dpll
+        str     r8, [r4]                @ set val
+        mov     r0, #1000               @ dead spin a bit
+wait_more:
+        subs    r0, r0, #1              @ dec loop
+        bne     wait_more               @ delay done?
+wait_lock:
+        ldr     r8, [r5]                @ get lock val
+        and     r8, r8, #3              @ isolate field
+        cmp     r8, #2                  @ locked?
+        bne     wait_lock               @ wait if not
+pend:
+        /* update memory timings & briefly lock dll */
+        ldr     r4, omap243x_ssp_sdrc_rfr       @ get addr
+        str     r1, [r4]                @ update refresh timing
+        ldr     r11, omap243x_ssp_dlla_ctrl     @ get addr of DLLA ctrl
+        ldr     r10, [r11]              @ get current val
+        mvn     r9, #0x4                @ mask to get clear bit2
+        and     r10, r10, r9            @ clear bit2 for lock mode
+        orr     r10, r10, #0x8          @ make sure DLL on (es2 bit pos)
+        str     r10, [r11]              @ commit to DLLA_CTRL
+        add     r11, r11, #0x8          @ move to dllb
+        str     r10, [r11]              @ hit DLLB also
+
+        mov     r4, #0x800              @ relock time (min 0x400 L3 clocks)
+wait_dll_lock:
+        subs    r4, r4, #0x1
+        bne     wait_dll_lock
+        nop
+        ldmfd   sp!, {r0-r12, pc}       @ restore regs and return
+
+omap243x_ssp_set_config:
+        .word OMAP243X_PRCM_CLKCFG_CTRL
+omap243x_ssp_pll_ctl:
+        .word OMAP2430_CM_REGADDR(PLL_MOD, CM_CLKEN)
+omap243x_ssp_pll_stat:
+        .word OMAP2430_CM_REGADDR(PLL_MOD, CM_IDLEST)
+omap243x_ssp_pll_div:
+        .word OMAP2430_CM_REGADDR(PLL_MOD, CM_CLKSEL1)
+omap243x_ssp_sdrc_rfr:
+        .word OMAP243X_SDRC_REGADDR(SDRC_RFR_CTRL_0)
+omap243x_ssp_dlla_ctrl:
+        .word OMAP243X_SDRC_REGADDR(SDRC_DLLA_CTRL)
+
+ENTRY(omap243x_sram_set_prcm_sz)
+        .word   . - omap243x_sram_set_prcm