1 files changed, 180 insertions, 0 deletions
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
new file mode 100644
index 000000000000..f4df04fe1dd8
--- /dev/null
+++ b/arch/arm/mach-omap2/serial.c
@@ -0,0 +1,180 @@
+/*
+ * arch/arm/mach-omap/omap2/serial.c
+ *
+ * OMAP2 serial support.
+ *
+ * Copyright (C) 2005 Nokia Corporation
+ * Author: Paul Mundt <paul.mundt@nokia.com>
+ *
+ * Based off of arch/arm/mach-omap/omap1/serial.c
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/serial_8250.h>
+#include <linux/serial_reg.h>
+#include <asm/io.h>
+#include <asm/hardware/clock.h>
+#include <asm/arch/common.h>
+#include <asm/arch/board.h>
+static struct clk * uart1_ick = NULL;
+static struct clk * uart1_fck = NULL;
+static struct clk * uart2_ick = NULL;
+static struct clk * uart2_fck = NULL;
+static struct clk * uart3_ick = NULL;
+static struct clk * uart3_fck = NULL;
+static struct plat_serial8250_port serial_platform_data[] = {
+        {
+                .membase        = (char *)IO_ADDRESS(OMAP_UART1_BASE),
+                .mapbase        = (unsigned long)OMAP_UART1_BASE,
+                .irq            = 72,
+                .flags          = UPF_BOOT_AUTOCONF,
+                .iotype         = UPIO_MEM,
+                .regshift       = 2,
+                .uartclk        = OMAP16XX_BASE_BAUD * 16,
+        }, {
+                .membase        = (char *)IO_ADDRESS(OMAP_UART2_BASE),
+                .mapbase        = (unsigned long)OMAP_UART2_BASE,
+                .irq            = 73,
+                .flags          = UPF_BOOT_AUTOCONF,
+                .iotype         = UPIO_MEM,
+                .regshift       = 2,
+                .uartclk        = OMAP16XX_BASE_BAUD * 16,
+        }, {
+                .membase        = (char *)IO_ADDRESS(OMAP_UART3_BASE),
+                .mapbase        = (unsigned long)OMAP_UART3_BASE,
+                .irq            = 74,
+                .flags          = UPF_BOOT_AUTOCONF,
+                .iotype         = UPIO_MEM,
+                .regshift       = 2,
+                .uartclk        = OMAP16XX_BASE_BAUD * 16,
+        }, {
+                .flags          = 0
+        }
+};
+static inline unsigned int serial_read_reg(struct plat_serial8250_port *up,
+                                           int offset)
+{
+        offset <<= up->regshift;
+        return (unsigned int)__raw_readb(up->membase + offset);
+}
+static inline void serial_write_reg(struct plat_serial8250_port *p, int offset,
+                                    int value)
+{
+        offset <<= p->regshift;
+        __raw_writeb(value, (unsigned long)(p->membase + offset));
+}
+/*
+ * Internal UARTs need to be initialized for the 8250 autoconfig to work
+ * properly. Note that the TX watermark initialization may not be needed
+ * once the 8250.c watermark handling code is merged.
+ */
+static inline void __init omap_serial_reset(struct plat_serial8250_port *p)
+{
+        serial_write_reg(p, UART_OMAP_MDR1, 0x07);
+        serial_write_reg(p, UART_OMAP_SCR, 0x08);
+        serial_write_reg(p, UART_OMAP_MDR1, 0x00);
+        serial_write_reg(p, UART_OMAP_SYSC, 0x01);
+}
+void __init omap_serial_init()
+{
+        int i;
+        const struct omap_uart_config *info;
+        /*
+         * Make sure the serial ports are muxed on at this point.
+         * You have to mux them off in device drivers later on
+         * if not needed.
+         */
+        info = omap_get_config(OMAP_TAG_UART,
+                               struct omap_uart_config);
+        if (info == NULL)
+                return;
+        for (i = 0; i < OMAP_MAX_NR_PORTS; i++) {
+                struct plat_serial8250_port *p = serial_platform_data + i;
+                if (!(info->enabled_uarts & (1 << i))) {
+                        p->membase = 0;
+                        p->mapbase = 0;
+                        continue;
+                }
+                switch (i) {
+                case 0:
+                        uart1_ick = clk_get(NULL, "uart1_ick");
+                        if (IS_ERR(uart1_ick))
+                                printk("Could not get uart1_ick\n");
+                        else {
+                                clk_use(uart1_ick);
+                        }
+                        uart1_fck = clk_get(NULL, "uart1_fck");
+                        if (IS_ERR(uart1_fck))
+                                printk("Could not get uart1_fck\n");
+                        else {
+                                clk_use(uart1_fck);
+                        }
+                        break;
+                case 1:
+                        uart2_ick = clk_get(NULL, "uart2_ick");
+                        if (IS_ERR(uart2_ick))
+                                printk("Could not get uart2_ick\n");
+                        else {
+                                clk_use(uart2_ick);
+                        }
+                        uart2_fck = clk_get(NULL, "uart2_fck");
+                        if (IS_ERR(uart2_fck))
+                                printk("Could not get uart2_fck\n");
+                        else {
+                                clk_use(uart2_fck);
+                        }
+                        break;
+                case 2:
+                        uart3_ick = clk_get(NULL, "uart3_ick");
+                        if (IS_ERR(uart3_ick))
+                                printk("Could not get uart3_ick\n");
+                        else {
+                                clk_use(uart3_ick);
+                        }
+                        uart3_fck = clk_get(NULL, "uart3_fck");
+                        if (IS_ERR(uart3_fck))
+                                printk("Could not get uart3_fck\n");
+                        else {
+                                clk_use(uart3_fck);
+                        }
+                        break;
+                }
+                omap_serial_reset(p);
+        }
+}
+static struct platform_device serial_device = {
+        .name                   = "serial8250",
+        .id                     = 0,
+        .dev                    = {
+                .platform_data  = serial_platform_data,
+        },
+};
+static int __init omap_init(void)
+{
+        return platform_device_register(&serial_device);
+}
+arch_initcall(omap_init);

diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c new file mode 100644 index 000000000000..f4df04fe1dd8 --- /dev/null +++ b/arch/arm/mach-omap2/serial.c
@@ -0,0 +1,180 @@
	1	/*
	2	* arch/arm/mach-omap/omap2/serial.c
	3	*
	4	* OMAP2 serial support.
	5	*
	6	* Copyright (C) 2005 Nokia Corporation
	7	* Author: Paul Mundt <paul.mundt@nokia.com>
	8	*
	9	* Based off of arch/arm/mach-omap/omap1/serial.c
	10	*
	11	* This file is subject to the terms and conditions of the GNU General Public
	12	* License. See the file "COPYING" in the main directory of this archive
	13	* for more details.
	14	*/
	15	#include <linux/kernel.h>
	16	#include <linux/init.h>
	17	#include <linux/serial_8250.h>
	18	#include <linux/serial_reg.h>
	19
	20	#include <asm/io.h>
	21	#include <asm/hardware/clock.h>
	22
	23	#include <asm/arch/common.h>
	24	#include <asm/arch/board.h>
	25
	26	static struct clk * uart1_ick = NULL;
	27	static struct clk * uart1_fck = NULL;
	28	static struct clk * uart2_ick = NULL;
	29	static struct clk * uart2_fck = NULL;
	30	static struct clk * uart3_ick = NULL;
	31	static struct clk * uart3_fck = NULL;
	32
	33	static struct plat_serial8250_port serial_platform_data[] = {
	34	{
	35	.membase = (char *)IO_ADDRESS(OMAP_UART1_BASE),
	36	.mapbase = (unsigned long)OMAP_UART1_BASE,
	37	.irq = 72,
	38	.flags = UPF_BOOT_AUTOCONF,
	39	.iotype = UPIO_MEM,
	40	.regshift = 2,
	41	.uartclk = OMAP16XX_BASE_BAUD * 16,
	42	}, {
	43	.membase = (char *)IO_ADDRESS(OMAP_UART2_BASE),
	44	.mapbase = (unsigned long)OMAP_UART2_BASE,
	45	.irq = 73,
	46	.flags = UPF_BOOT_AUTOCONF,
	47	.iotype = UPIO_MEM,
	48	.regshift = 2,
	49	.uartclk = OMAP16XX_BASE_BAUD * 16,
	50	}, {
	51	.membase = (char *)IO_ADDRESS(OMAP_UART3_BASE),
	52	.mapbase = (unsigned long)OMAP_UART3_BASE,
	53	.irq = 74,
	54	.flags = UPF_BOOT_AUTOCONF,
	55	.iotype = UPIO_MEM,
	56	.regshift = 2,
	57	.uartclk = OMAP16XX_BASE_BAUD * 16,
	58	}, {
	59	.flags = 0
	60	}
	61	};
	62
	63	static inline unsigned int serial_read_reg(struct plat_serial8250_port *up,
	64	int offset)
	65	{
	66	offset <<= up->regshift;
	67	return (unsigned int)__raw_readb(up->membase + offset);
	68	}
	69
	70	static inline void serial_write_reg(struct plat_serial8250_port *p, int offset,
	71	int value)
	72	{
	73	offset <<= p->regshift;
	74	__raw_writeb(value, (unsigned long)(p->membase + offset));
	75	}
	76
	77	/*
	78	* Internal UARTs need to be initialized for the 8250 autoconfig to work
	79	* properly. Note that the TX watermark initialization may not be needed
	80	* once the 8250.c watermark handling code is merged.
	81	*/
	82	static inline void __init omap_serial_reset(struct plat_serial8250_port *p)
	83	{
	84	serial_write_reg(p, UART_OMAP_MDR1, 0x07);
	85	serial_write_reg(p, UART_OMAP_SCR, 0x08);
	86	serial_write_reg(p, UART_OMAP_MDR1, 0x00);
	87	serial_write_reg(p, UART_OMAP_SYSC, 0x01);
	88	}
	89
	90	void __init omap_serial_init()
	91	{
	92	int i;
	93	const struct omap_uart_config *info;
	94
	95	/*
	96	* Make sure the serial ports are muxed on at this point.
	97	* You have to mux them off in device drivers later on
	98	* if not needed.
	99	*/
	100
	101	info = omap_get_config(OMAP_TAG_UART,
	102	struct omap_uart_config);
	103
	104	if (info == NULL)
	105	return;
	106
	107	for (i = 0; i < OMAP_MAX_NR_PORTS; i++) {
	108	struct plat_serial8250_port *p = serial_platform_data + i;
	109
	110	if (!(info->enabled_uarts & (1 << i))) {
	111	p->membase = 0;
	112	p->mapbase = 0;
	113	continue;
	114	}
	115
	116	switch (i) {
	117	case 0:
	118	uart1_ick = clk_get(NULL, "uart1_ick");
	119	if (IS_ERR(uart1_ick))
	120	printk("Could not get uart1_ick\n");
	121	else {
	122	clk_use(uart1_ick);
	123	}
	124
	125	uart1_fck = clk_get(NULL, "uart1_fck");
	126	if (IS_ERR(uart1_fck))
	127	printk("Could not get uart1_fck\n");
	128	else {
	129	clk_use(uart1_fck);
	130	}
	131	break;
	132	case 1:
	133	uart2_ick = clk_get(NULL, "uart2_ick");
	134	if (IS_ERR(uart2_ick))
	135	printk("Could not get uart2_ick\n");
	136	else {
	137	clk_use(uart2_ick);
	138	}
	139
	140	uart2_fck = clk_get(NULL, "uart2_fck");
	141	if (IS_ERR(uart2_fck))
	142	printk("Could not get uart2_fck\n");
	143	else {
	144	clk_use(uart2_fck);
	145	}
	146	break;
	147	case 2:
	148	uart3_ick = clk_get(NULL, "uart3_ick");
	149	if (IS_ERR(uart3_ick))
	150	printk("Could not get uart3_ick\n");
	151	else {
	152	clk_use(uart3_ick);
	153	}
	154
	155	uart3_fck = clk_get(NULL, "uart3_fck");
	156	if (IS_ERR(uart3_fck))
	157	printk("Could not get uart3_fck\n");
	158	else {
	159	clk_use(uart3_fck);
	160	}
	161	break;
	162	}
	163
	164	omap_serial_reset(p);
	165	}
	166	}
	167
	168	static struct platform_device serial_device = {
	169	.name = "serial8250",
	170	.id = 0,
	171	.dev = {
	172	.platform_data = serial_platform_data,
	173	},
	174	};
	175
	176	static int __init omap_init(void)
	177	{
	178	return platform_device_register(&serial_device);
	179	}
	180	arch_initcall(omap_init);