1 files changed, 178 insertions, 0 deletions

diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c
new file mode 100644
index 000000000000..8fe8d230f21b
--- /dev/null
+++ b/arch/arm/mach-omap2/omap-smp.c
@@ -0,0 +1,178 @@
+/*
+ * OMAP4 SMP source file. It contains platform specific fucntions
+ * needed for the linux smp kernel.
+ *
+ * Copyright (C) 2009 Texas Instruments, Inc.
+ *
+ * Author:
+ *      Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * Platform file needed for the OMAP4 SMP. This file is based on arm
+ * realview smp platform.
+ * * Copyright (c) 2002 ARM Limited.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/jiffies.h>
+#include <linux/smp.h>
+#include <linux/io.h>
+
+#include <asm/localtimer.h>
+#include <asm/smp_scu.h>
+#include <mach/hardware.h>
+
+/* Registers used for communicating startup information */
+#define OMAP4_AUXCOREBOOT_REG0          (OMAP44XX_VA_WKUPGEN_BASE + 0x800)
+#define OMAP4_AUXCOREBOOT_REG1          (OMAP44XX_VA_WKUPGEN_BASE + 0x804)
+
+/* SCU base address */
+static void __iomem *scu_base = OMAP44XX_VA_SCU_BASE;
+
+/*
+ * Use SCU config register to count number of cores
+ */
+static inline unsigned int get_core_count(void)
+{
+        if (scu_base)
+                return scu_get_core_count(scu_base);
+        return 1;
+}
+
+static DEFINE_SPINLOCK(boot_lock);
+
+void __cpuinit platform_secondary_init(unsigned int cpu)
+{
+        trace_hardirqs_off();
+
+        /*
+         * If any interrupts are already enabled for the primary
+         * core (e.g. timer irq), then they will not have been enabled
+         * for us: do so
+         */
+
+        gic_cpu_init(0, IO_ADDRESS(OMAP44XX_GIC_CPU_BASE));
+
+        /*
+         * Synchronise with the boot thread.
+         */
+        spin_lock(&boot_lock);
+        spin_unlock(&boot_lock);
+}
+
+int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+        unsigned long timeout;
+
+        /*
+         * Set synchronisation state between this boot processor
+         * and the secondary one
+         */
+        spin_lock(&boot_lock);
+
+        /*
+         * Update the AuxCoreBoot1 with boot state for secondary core.
+         * omap_secondary_startup() routine will hold the secondary core till
+         * the AuxCoreBoot1 register is updated with cpu state
+         * A barrier is added to ensure that write buffer is drained
+         */
+        __raw_writel(cpu, OMAP4_AUXCOREBOOT_REG1);
+        smp_wmb();
+
+        timeout = jiffies + (1 * HZ);
+        while (time_before(jiffies, timeout))
+                ;
+
+        /*
+         * Now the secondary core is starting up let it run its
+         * calibrations, then wait for it to finish
+         */
+        spin_unlock(&boot_lock);
+
+        return 0;
+}
+
+static void __init wakeup_secondary(void)
+{
+        /*
+         * Write the address of secondary startup routine into the
+         * AuxCoreBoot0 where ROM code will jump and start executing
+         * on secondary core once out of WFE
+         * A barrier is added to ensure that write buffer is drained
+         */
+        __raw_writel(virt_to_phys(omap_secondary_startup),         \
+                                        OMAP4_AUXCOREBOOT_REG0);
+        smp_wmb();
+
+        /*
+         * Send a 'sev' to wake the secondary core from WFE.
+         */
+        set_event();
+        mb();
+}
+
+/*
+ * Initialise the CPU possible map early - this describes the CPUs
+ * which may be present or become present in the system.
+ */
+void __init smp_init_cpus(void)
+{
+        unsigned int i, ncores = get_core_count();
+
+        for (i = 0; i < ncores; i++)
+                set_cpu_possible(i, true);
+}
+
+void __init smp_prepare_cpus(unsigned int max_cpus)
+{
+        unsigned int ncores = get_core_count();
+        unsigned int cpu = smp_processor_id();
+        int i;
+
+        /* sanity check */
+        if (ncores == 0) {
+                printk(KERN_ERR
+                       "OMAP4: strange core count of 0? Default to 1\n");
+                ncores = 1;
+        }
+
+        if (ncores > NR_CPUS) {
+                printk(KERN_WARNING
+                       "OMAP4: no. of cores (%d) greater than configured "
+                       "maximum of %d - clipping\n",
+                       ncores, NR_CPUS);
+                ncores = NR_CPUS;
+        }
+        smp_store_cpu_info(cpu);
+
+        /*
+         * are we trying to boot more cores than exist?
+         */
+        if (max_cpus > ncores)
+                max_cpus = ncores;
+
+        /*
+         * Initialise the present map, which describes the set of CPUs
+         * actually populated at the present time.
+         */
+        for (i = 0; i < max_cpus; i++)
+                set_cpu_present(i, true);
+
+        if (max_cpus > 1) {
+                /*
+                 * Enable the local timer or broadcast device for the
+                 * boot CPU, but only if we have more than one CPU.
+                 */
+                percpu_timer_setup();
+
+                /*
+                 * Initialise the SCU and wake up the secondary core using
+                 * wakeup_secondary().
+                 */
+                scu_enable(scu_base);
+                wakeup_secondary();
+        }
+}