1 files changed, 0 insertions, 137 deletions

diff --git a/arch/arm/mach-omap2/include/mach/entry-macro.S b/arch/arm/mach-omap2/include/mach/entry-macro.S
index feb90a10945a..56964a0c4c7e 100644
--- a/arch/arm/mach-omap2/include/mach/entry-macro.S
+++ b/arch/arm/mach-omap2/include/mach/entry-macro.S
@@ -10,146 +10,9 @@
  * License version 2. This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
  */
-#include <mach/hardware.h>
-#include <mach/io.h>
-#include <mach/irqs.h>
-#include <asm/hardware/gic.h>
-
-#include <plat/omap24xx.h>
-#include <plat/omap34xx.h>
-#include <plat/omap44xx.h>
-
-#include <plat/multi.h>
-
-#define OMAP2_IRQ_BASE          OMAP2_L4_IO_ADDRESS(OMAP24XX_IC_BASE)
-#define OMAP3_IRQ_BASE          OMAP2_L4_IO_ADDRESS(OMAP34XX_IC_BASE)
-#define OMAP4_IRQ_BASE          OMAP2_L4_IO_ADDRESS(OMAP44XX_GIC_CPU_BASE)
-#define INTCPS_SIR_IRQ_OFFSET   0x0040  /* omap2/3 active interrupt offset */
-#define ACTIVEIRQ_MASK          0x7f    /* omap2/3 active interrupt bits */
 
                 .macro  disable_fiq
                 .endm
 
                 .macro  arch_ret_to_user, tmp1, tmp2
                 .endm
-
-/*
- * Unoptimized irq functions for multi-omap2, 3 and 4
- */
-
-#ifdef MULTI_OMAP2
-                /*
-                 * Configure the interrupt base on the first interrupt.
-                 * See also omap_irq_base_init for setting omap_irq_base.
-                 */
-                .macro  get_irqnr_preamble, base, tmp
-                ldr     \base, =omap_irq_base   @ irq base address
-                ldr     \base, [\base, #0]      @ irq base value
-                .endm
-
-                /* Check the pending interrupts. Note that base already set */
-                .macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-                tst     \base, #0x100           @ gic address?
-                bne     4401f                   @ found gic
-
-                /* Handle omap2 and omap3 */
-                ldr     \irqnr, [\base, #0x98] /* IRQ pending reg 1 */
-                cmp     \irqnr, #0x0
-                bne     9998f
-                ldr     \irqnr, [\base, #0xb8] /* IRQ pending reg 2 */
-                cmp     \irqnr, #0x0
-                bne     9998f
-                ldr     \irqnr, [\base, #0xd8] /* IRQ pending reg 3 */
-                cmp     \irqnr, #0x0
-                bne     9998f
-
-                /*
-                 * ti816x has additional IRQ pending register. Checking this
-                 * register on omap2 & omap3 has no effect (read as 0).
-                 */
-                ldr     \irqnr, [\base, #0xf8] /* IRQ pending reg 4 */
-                cmp     \irqnr, #0x0
-9998:
-                ldrne   \irqnr, [\base, #INTCPS_SIR_IRQ_OFFSET]
-                and     \irqnr, \irqnr, #ACTIVEIRQ_MASK /* Clear spurious bits */
-                b       9999f
-
-                /* Handle omap4 */
-4401:           ldr     \irqstat, [\base, #GIC_CPU_INTACK]
-                ldr     \tmp, =1021
-                bic     \irqnr, \irqstat, #0x1c00
-                cmp     \irqnr, #15
-                cmpcc   \irqnr, \irqnr
-                cmpne   \irqnr, \tmp
-                cmpcs   \irqnr, \irqnr
-9999:
-                .endm
-
-#ifdef CONFIG_SMP
-                /* We assume that irqstat (the raw value of the IRQ acknowledge
-                 * register) is preserved from the macro above.
-                 * If there is an IPI, we immediately signal end of interrupt
-                 * on the controller, since this requires the original irqstat
-                 * value which we won't easily be able to recreate later.
-                 */
-
-                .macro test_for_ipi, irqnr, irqstat, base, tmp
-                bic     \irqnr, \irqstat, #0x1c00
-                cmp     \irqnr, #16
-                it      cc
-                strcc   \irqstat, [\base, #GIC_CPU_EOI]
-                it      cs
-                cmpcs   \irqnr, \irqnr
-                .endm
-#endif  /* CONFIG_SMP */
-
-#else   /* MULTI_OMAP2 */
-
-
-/*
- * Optimized irq functions for omap2, 3 and 4
- */
-
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
-                .macro  get_irqnr_preamble, base, tmp
-#ifdef CONFIG_ARCH_OMAP2
-                ldr     \base, =OMAP2_IRQ_BASE
-#else
-                ldr     \base, =OMAP3_IRQ_BASE
-#endif
-                .endm
-
-                /* Check the pending interrupts. Note that base already set */
-                .macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-                ldr     \irqnr, [\base, #0x98] /* IRQ pending reg 1 */
-                cmp     \irqnr, #0x0
-                bne     9999f
-                ldr     \irqnr, [\base, #0xb8] /* IRQ pending reg 2 */
-                cmp     \irqnr, #0x0
-                bne     9999f
-                ldr     \irqnr, [\base, #0xd8] /* IRQ pending reg 3 */
-                cmp     \irqnr, #0x0
-#ifdef CONFIG_SOC_OMAPTI816X
-                bne     9999f
-                ldr     \irqnr, [\base, #0xf8] /* IRQ pending reg 4 */
-                cmp     \irqnr, #0x0
-#endif
-9999:
-                ldrne   \irqnr, [\base, #INTCPS_SIR_IRQ_OFFSET]
-                and     \irqnr, \irqnr, #ACTIVEIRQ_MASK /* Clear spurious bits */
-
-                .endm
-#endif
-
-
-#ifdef CONFIG_ARCH_OMAP4
-#define HAVE_GET_IRQNR_PREAMBLE
-#include <asm/hardware/entry-macro-gic.S>
-
-                .macro  get_irqnr_preamble, base, tmp
-                ldr     \base, =OMAP4_IRQ_BASE
-                .endm
-
-#endif
-
-#endif  /* MULTI_OMAP2 */