diff options
Diffstat (limited to 'arch/arm/mach-omap2/clock.h')
-rw-r--r-- | arch/arm/mach-omap2/clock.h | 2103 |
1 files changed, 2103 insertions, 0 deletions
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h new file mode 100644 index 000000000000..4aeab5591bd3 --- /dev/null +++ b/arch/arm/mach-omap2/clock.h | |||
@@ -0,0 +1,2103 @@ | |||
1 | /* | ||
2 | * linux/arch/arm/mach-omap24xx/clock.h | ||
3 | * | ||
4 | * Copyright (C) 2005 Texas Instruments Inc. | ||
5 | * Richard Woodruff <r-woodruff2@ti.com> | ||
6 | * Created for OMAP2. | ||
7 | * | ||
8 | * Copyright (C) 2004 Nokia corporation | ||
9 | * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com> | ||
10 | * Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc | ||
11 | * | ||
12 | * This program is free software; you can redistribute it and/or modify | ||
13 | * it under the terms of the GNU General Public License version 2 as | ||
14 | * published by the Free Software Foundation. | ||
15 | */ | ||
16 | |||
17 | #ifndef __ARCH_ARM_MACH_OMAP2_CLOCK_H | ||
18 | #define __ARCH_ARM_MACH_OMAP2_CLOCK_H | ||
19 | |||
20 | static void omap2_sys_clk_recalc(struct clk * clk); | ||
21 | static void omap2_clksel_recalc(struct clk * clk); | ||
22 | static void omap2_followparent_recalc(struct clk * clk); | ||
23 | static void omap2_propagate_rate(struct clk * clk); | ||
24 | static void omap2_mpu_recalc(struct clk * clk); | ||
25 | static int omap2_select_table_rate(struct clk * clk, unsigned long rate); | ||
26 | static long omap2_round_to_table_rate(struct clk * clk, unsigned long rate); | ||
27 | static void omap2_clk_unuse(struct clk *clk); | ||
28 | static void omap2_sys_clk_recalc(struct clk * clk); | ||
29 | static u32 omap2_clksel_to_divisor(u32 div_sel, u32 field_val); | ||
30 | static u32 omap2_clksel_get_divisor(struct clk *clk); | ||
31 | |||
32 | |||
33 | #define RATE_IN_242X (1 << 0) | ||
34 | #define RATE_IN_243X (1 << 1) | ||
35 | |||
36 | /* Memory timings */ | ||
37 | #define M_DDR 1 | ||
38 | #define M_LOCK_CTRL (1 << 2) | ||
39 | #define M_UNLOCK 0 | ||
40 | #define M_LOCK 1 | ||
41 | |||
42 | struct memory_timings { | ||
43 | u32 m_type; /* ddr = 1, sdr = 0 */ | ||
44 | u32 dll_mode; /* use lock mode = 1, unlock mode = 0 */ | ||
45 | u32 slow_dll_ctrl; /* unlock mode, dll value for slow speed */ | ||
46 | u32 fast_dll_ctrl; /* unlock mode, dll value for fast speed */ | ||
47 | u32 base_cs; /* base chip select to use for calculations */ | ||
48 | }; | ||
49 | |||
50 | /* Key dividers which make up a PRCM set. Ratio's for a PRCM are mandated. | ||
51 | * xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU,CM_CLKSEL_DSP | ||
52 | * CM_CLKSEL_GFX, CM_CLKSEL1_CORE, CM_CLKSEL1_PLL CM_CLKSEL2_PLL, CM_CLKSEL_MDM | ||
53 | */ | ||
54 | struct prcm_config { | ||
55 | unsigned long xtal_speed; /* crystal rate */ | ||
56 | unsigned long dpll_speed; /* dpll: out*xtal*M/(N-1)table_recalc */ | ||
57 | unsigned long mpu_speed; /* speed of MPU */ | ||
58 | unsigned long cm_clksel_mpu; /* mpu divider */ | ||
59 | unsigned long cm_clksel_dsp; /* dsp+iva1 div(2420), iva2.1(2430) */ | ||
60 | unsigned long cm_clksel_gfx; /* gfx dividers */ | ||
61 | unsigned long cm_clksel1_core; /* major subsystem dividers */ | ||
62 | unsigned long cm_clksel1_pll; /* m,n */ | ||
63 | unsigned long cm_clksel2_pll; /* dpllx1 or x2 out */ | ||
64 | unsigned long cm_clksel_mdm; /* modem dividers 2430 only */ | ||
65 | unsigned long base_sdrc_rfr; /* base refresh timing for a set */ | ||
66 | unsigned char flags; | ||
67 | }; | ||
68 | |||
69 | /* Mask for clksel which support parent settign in set_rate */ | ||
70 | #define SRC_SEL_MASK (CM_CORE_SEL1 | CM_CORE_SEL2 | CM_WKUP_SEL1 | \ | ||
71 | CM_PLL_SEL1 | CM_PLL_SEL2 | CM_SYSCLKOUT_SEL1) | ||
72 | |||
73 | /* Mask for clksel regs which support rate operations */ | ||
74 | #define SRC_RATE_SEL_MASK (CM_MPU_SEL1 | CM_DSP_SEL1 | CM_GFX_SEL1 | \ | ||
75 | CM_MODEM_SEL1 | CM_CORE_SEL1 | CM_CORE_SEL2 | \ | ||
76 | CM_WKUP_SEL1 | CM_PLL_SEL1 | CM_PLL_SEL2 | \ | ||
77 | CM_SYSCLKOUT_SEL1) | ||
78 | |||
79 | /* | ||
80 | * The OMAP2 processor can be run at several discrete 'PRCM configurations'. | ||
81 | * These configurations are characterized by voltage and speed for clocks. | ||
82 | * The device is only validated for certain combinations. One way to express | ||
83 | * these combinations is via the 'ratio's' which the clocks operate with | ||
84 | * respect to each other. These ratio sets are for a given voltage/DPLL | ||
85 | * setting. All configurations can be described by a DPLL setting and a ratio | ||
86 | * There are 3 ratio sets for the 2430 and X ratio sets for 2420. | ||
87 | * | ||
88 | * 2430 differs from 2420 in that there are no more phase synchronizers used. | ||
89 | * They both have a slightly different clock domain setup. 2420(iva1,dsp) vs | ||
90 | * 2430 (iva2.1, NOdsp, mdm) | ||
91 | */ | ||
92 | |||
93 | /* Core fields for cm_clksel, not ratio governed */ | ||
94 | #define RX_CLKSEL_DSS1 (0x10 << 8) | ||
95 | #define RX_CLKSEL_DSS2 (0x0 << 13) | ||
96 | #define RX_CLKSEL_SSI (0x5 << 20) | ||
97 | |||
98 | /*------------------------------------------------------------------------- | ||
99 | * Voltage/DPLL ratios | ||
100 | *-------------------------------------------------------------------------*/ | ||
101 | |||
102 | /* 2430 Ratio's, 2430-Ratio Config 1 */ | ||
103 | #define R1_CLKSEL_L3 (4 << 0) | ||
104 | #define R1_CLKSEL_L4 (2 << 5) | ||
105 | #define R1_CLKSEL_USB (4 << 25) | ||
106 | #define R1_CM_CLKSEL1_CORE_VAL R1_CLKSEL_USB | RX_CLKSEL_SSI | \ | ||
107 | RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \ | ||
108 | R1_CLKSEL_L4 | R1_CLKSEL_L3 | ||
109 | #define R1_CLKSEL_MPU (2 << 0) | ||
110 | #define R1_CM_CLKSEL_MPU_VAL R1_CLKSEL_MPU | ||
111 | #define R1_CLKSEL_DSP (2 << 0) | ||
112 | #define R1_CLKSEL_DSP_IF (2 << 5) | ||
113 | #define R1_CM_CLKSEL_DSP_VAL R1_CLKSEL_DSP | R1_CLKSEL_DSP_IF | ||
114 | #define R1_CLKSEL_GFX (2 << 0) | ||
115 | #define R1_CM_CLKSEL_GFX_VAL R1_CLKSEL_GFX | ||
116 | #define R1_CLKSEL_MDM (4 << 0) | ||
117 | #define R1_CM_CLKSEL_MDM_VAL R1_CLKSEL_MDM | ||
118 | |||
119 | /* 2430-Ratio Config 2 */ | ||
120 | #define R2_CLKSEL_L3 (6 << 0) | ||
121 | #define R2_CLKSEL_L4 (2 << 5) | ||
122 | #define R2_CLKSEL_USB (2 << 25) | ||
123 | #define R2_CM_CLKSEL1_CORE_VAL R2_CLKSEL_USB | RX_CLKSEL_SSI | \ | ||
124 | RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \ | ||
125 | R2_CLKSEL_L4 | R2_CLKSEL_L3 | ||
126 | #define R2_CLKSEL_MPU (2 << 0) | ||
127 | #define R2_CM_CLKSEL_MPU_VAL R2_CLKSEL_MPU | ||
128 | #define R2_CLKSEL_DSP (2 << 0) | ||
129 | #define R2_CLKSEL_DSP_IF (3 << 5) | ||
130 | #define R2_CM_CLKSEL_DSP_VAL R2_CLKSEL_DSP | R2_CLKSEL_DSP_IF | ||
131 | #define R2_CLKSEL_GFX (2 << 0) | ||
132 | #define R2_CM_CLKSEL_GFX_VAL R2_CLKSEL_GFX | ||
133 | #define R2_CLKSEL_MDM (6 << 0) | ||
134 | #define R2_CM_CLKSEL_MDM_VAL R2_CLKSEL_MDM | ||
135 | |||
136 | /* 2430-Ratio Bootm (BYPASS) */ | ||
137 | #define RB_CLKSEL_L3 (1 << 0) | ||
138 | #define RB_CLKSEL_L4 (1 << 5) | ||
139 | #define RB_CLKSEL_USB (1 << 25) | ||
140 | #define RB_CM_CLKSEL1_CORE_VAL RB_CLKSEL_USB | RX_CLKSEL_SSI | \ | ||
141 | RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \ | ||
142 | RB_CLKSEL_L4 | RB_CLKSEL_L3 | ||
143 | #define RB_CLKSEL_MPU (1 << 0) | ||
144 | #define RB_CM_CLKSEL_MPU_VAL RB_CLKSEL_MPU | ||
145 | #define RB_CLKSEL_DSP (1 << 0) | ||
146 | #define RB_CLKSEL_DSP_IF (1 << 5) | ||
147 | #define RB_CM_CLKSEL_DSP_VAL RB_CLKSEL_DSP | RB_CLKSEL_DSP_IF | ||
148 | #define RB_CLKSEL_GFX (1 << 0) | ||
149 | #define RB_CM_CLKSEL_GFX_VAL RB_CLKSEL_GFX | ||
150 | #define RB_CLKSEL_MDM (1 << 0) | ||
151 | #define RB_CM_CLKSEL_MDM_VAL RB_CLKSEL_MDM | ||
152 | |||
153 | /* 2420 Ratio Equivalents */ | ||
154 | #define RXX_CLKSEL_VLYNQ (0x12 << 15) | ||
155 | #define RXX_CLKSEL_SSI (0x8 << 20) | ||
156 | |||
157 | /* 2420-PRCM III 532MHz core */ | ||
158 | #define RIII_CLKSEL_L3 (4 << 0) /* 133MHz */ | ||
159 | #define RIII_CLKSEL_L4 (2 << 5) /* 66.5MHz */ | ||
160 | #define RIII_CLKSEL_USB (4 << 25) /* 33.25MHz */ | ||
161 | #define RIII_CM_CLKSEL1_CORE_VAL RIII_CLKSEL_USB | RXX_CLKSEL_SSI | \ | ||
162 | RXX_CLKSEL_VLYNQ | RX_CLKSEL_DSS2 | \ | ||
163 | RX_CLKSEL_DSS1 | RIII_CLKSEL_L4 | \ | ||
164 | RIII_CLKSEL_L3 | ||
165 | #define RIII_CLKSEL_MPU (2 << 0) /* 266MHz */ | ||
166 | #define RIII_CM_CLKSEL_MPU_VAL RIII_CLKSEL_MPU | ||
167 | #define RIII_CLKSEL_DSP (3 << 0) /* c5x - 177.3MHz */ | ||
168 | #define RIII_CLKSEL_DSP_IF (2 << 5) /* c5x - 88.67MHz */ | ||
169 | #define RIII_SYNC_DSP (1 << 7) /* Enable sync */ | ||
170 | #define RIII_CLKSEL_IVA (6 << 8) /* iva1 - 88.67MHz */ | ||
171 | #define RIII_SYNC_IVA (1 << 13) /* Enable sync */ | ||
172 | #define RIII_CM_CLKSEL_DSP_VAL RIII_SYNC_IVA | RIII_CLKSEL_IVA | \ | ||
173 | RIII_SYNC_DSP | RIII_CLKSEL_DSP_IF | \ | ||
174 | RIII_CLKSEL_DSP | ||
175 | #define RIII_CLKSEL_GFX (2 << 0) /* 66.5MHz */ | ||
176 | #define RIII_CM_CLKSEL_GFX_VAL RIII_CLKSEL_GFX | ||
177 | |||
178 | /* 2420-PRCM II 600MHz core */ | ||
179 | #define RII_CLKSEL_L3 (6 << 0) /* 100MHz */ | ||
180 | #define RII_CLKSEL_L4 (2 << 5) /* 50MHz */ | ||
181 | #define RII_CLKSEL_USB (2 << 25) /* 50MHz */ | ||
182 | #define RII_CM_CLKSEL1_CORE_VAL RII_CLKSEL_USB | \ | ||
183 | RXX_CLKSEL_SSI | RXX_CLKSEL_VLYNQ | \ | ||
184 | RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \ | ||
185 | RII_CLKSEL_L4 | RII_CLKSEL_L3 | ||
186 | #define RII_CLKSEL_MPU (2 << 0) /* 300MHz */ | ||
187 | #define RII_CM_CLKSEL_MPU_VAL RII_CLKSEL_MPU | ||
188 | #define RII_CLKSEL_DSP (3 << 0) /* c5x - 200MHz */ | ||
189 | #define RII_CLKSEL_DSP_IF (2 << 5) /* c5x - 100MHz */ | ||
190 | #define RII_SYNC_DSP (0 << 7) /* Bypass sync */ | ||
191 | #define RII_CLKSEL_IVA (6 << 8) /* iva1 - 200MHz */ | ||
192 | #define RII_SYNC_IVA (0 << 13) /* Bypass sync */ | ||
193 | #define RII_CM_CLKSEL_DSP_VAL RII_SYNC_IVA | RII_CLKSEL_IVA | \ | ||
194 | RII_SYNC_DSP | RII_CLKSEL_DSP_IF | \ | ||
195 | RII_CLKSEL_DSP | ||
196 | #define RII_CLKSEL_GFX (2 << 0) /* 50MHz */ | ||
197 | #define RII_CM_CLKSEL_GFX_VAL RII_CLKSEL_GFX | ||
198 | |||
199 | /* 2420-PRCM VII (boot) */ | ||
200 | #define RVII_CLKSEL_L3 (1 << 0) | ||
201 | #define RVII_CLKSEL_L4 (1 << 5) | ||
202 | #define RVII_CLKSEL_DSS1 (1 << 8) | ||
203 | #define RVII_CLKSEL_DSS2 (0 << 13) | ||
204 | #define RVII_CLKSEL_VLYNQ (1 << 15) | ||
205 | #define RVII_CLKSEL_SSI (1 << 20) | ||
206 | #define RVII_CLKSEL_USB (1 << 25) | ||
207 | |||
208 | #define RVII_CM_CLKSEL1_CORE_VAL RVII_CLKSEL_USB | RVII_CLKSEL_SSI | \ | ||
209 | RVII_CLKSEL_VLYNQ | RVII_CLKSEL_DSS2 | \ | ||
210 | RVII_CLKSEL_DSS1 | RVII_CLKSEL_L4 | RVII_CLKSEL_L3 | ||
211 | |||
212 | #define RVII_CLKSEL_MPU (1 << 0) /* all divide by 1 */ | ||
213 | #define RVII_CM_CLKSEL_MPU_VAL RVII_CLKSEL_MPU | ||
214 | |||
215 | #define RVII_CLKSEL_DSP (1 << 0) | ||
216 | #define RVII_CLKSEL_DSP_IF (1 << 5) | ||
217 | #define RVII_SYNC_DSP (0 << 7) | ||
218 | #define RVII_CLKSEL_IVA (1 << 8) | ||
219 | #define RVII_SYNC_IVA (0 << 13) | ||
220 | #define RVII_CM_CLKSEL_DSP_VAL RVII_SYNC_IVA | RVII_CLKSEL_IVA | RVII_SYNC_DSP | \ | ||
221 | RVII_CLKSEL_DSP_IF | RVII_CLKSEL_DSP | ||
222 | |||
223 | #define RVII_CLKSEL_GFX (1 << 0) | ||
224 | #define RVII_CM_CLKSEL_GFX_VAL RVII_CLKSEL_GFX | ||
225 | |||
226 | /*------------------------------------------------------------------------- | ||
227 | * 2430 Target modes: Along with each configuration the CPU has several | ||
228 | * modes which goes along with them. Modes mainly are the addition of | ||
229 | * describe DPLL combinations to go along with a ratio. | ||
230 | *-------------------------------------------------------------------------*/ | ||
231 | |||
232 | /* Hardware governed */ | ||
233 | #define MX_48M_SRC (0 << 3) | ||
234 | #define MX_54M_SRC (0 << 5) | ||
235 | #define MX_APLLS_CLIKIN_12 (3 << 23) | ||
236 | #define MX_APLLS_CLIKIN_13 (2 << 23) | ||
237 | #define MX_APLLS_CLIKIN_19_2 (0 << 23) | ||
238 | |||
239 | /* | ||
240 | * 2430 - standalone, 2*ref*M/(n+1), M/N is for exactness not relock speed | ||
241 | * #2 (ratio1) baseport-target | ||
242 | * #5a (ratio1) baseport-target, target DPLL = 266*2 = 532MHz | ||
243 | */ | ||
244 | #define M5A_DPLL_MULT_12 (133 << 12) | ||
245 | #define M5A_DPLL_DIV_12 (5 << 8) | ||
246 | #define M5A_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | \ | ||
247 | M5A_DPLL_DIV_12 | M5A_DPLL_MULT_12 | \ | ||
248 | MX_APLLS_CLIKIN_12 | ||
249 | #define M5A_DPLL_MULT_13 (266 << 12) | ||
250 | #define M5A_DPLL_DIV_13 (12 << 8) | ||
251 | #define M5A_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | \ | ||
252 | M5A_DPLL_DIV_13 | M5A_DPLL_MULT_13 | \ | ||
253 | MX_APLLS_CLIKIN_13 | ||
254 | #define M5A_DPLL_MULT_19 (180 << 12) | ||
255 | #define M5A_DPLL_DIV_19 (12 << 8) | ||
256 | #define M5A_CM_CLKSEL1_PLL_19_VAL MX_48M_SRC | MX_54M_SRC | \ | ||
257 | M5A_DPLL_DIV_19 | M5A_DPLL_MULT_19 | \ | ||
258 | MX_APLLS_CLIKIN_19_2 | ||
259 | /* #5b (ratio1) target DPLL = 200*2 = 400MHz */ | ||
260 | #define M5B_DPLL_MULT_12 (50 << 12) | ||
261 | #define M5B_DPLL_DIV_12 (2 << 8) | ||
262 | #define M5B_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | \ | ||
263 | M5B_DPLL_DIV_12 | M5B_DPLL_MULT_12 | \ | ||
264 | MX_APLLS_CLIKIN_12 | ||
265 | #define M5B_DPLL_MULT_13 (200 << 12) | ||
266 | #define M5B_DPLL_DIV_13 (12 << 8) | ||
267 | |||
268 | #define M5B_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | \ | ||
269 | M5B_DPLL_DIV_13 | M5B_DPLL_MULT_13 | \ | ||
270 | MX_APLLS_CLIKIN_13 | ||
271 | #define M5B_DPLL_MULT_19 (125 << 12) | ||
272 | #define M5B_DPLL_DIV_19 (31 << 8) | ||
273 | #define M5B_CM_CLKSEL1_PLL_19_VAL MX_48M_SRC | MX_54M_SRC | \ | ||
274 | M5B_DPLL_DIV_19 | M5B_DPLL_MULT_19 | \ | ||
275 | MX_APLLS_CLIKIN_19_2 | ||
276 | /* | ||
277 | * #4 (ratio2) | ||
278 | * #3 (ratio2) baseport-target, target DPLL = 330*2 = 660MHz | ||
279 | */ | ||
280 | #define M3_DPLL_MULT_12 (55 << 12) | ||
281 | #define M3_DPLL_DIV_12 (1 << 8) | ||
282 | #define M3_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | \ | ||
283 | M3_DPLL_DIV_12 | M3_DPLL_MULT_12 | \ | ||
284 | MX_APLLS_CLIKIN_12 | ||
285 | #define M3_DPLL_MULT_13 (330 << 12) | ||
286 | #define M3_DPLL_DIV_13 (12 << 8) | ||
287 | #define M3_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | \ | ||
288 | M3_DPLL_DIV_13 | M3_DPLL_MULT_13 | \ | ||
289 | MX_APLLS_CLIKIN_13 | ||
290 | #define M3_DPLL_MULT_19 (275 << 12) | ||
291 | #define M3_DPLL_DIV_19 (15 << 8) | ||
292 | #define M3_CM_CLKSEL1_PLL_19_VAL MX_48M_SRC | MX_54M_SRC | \ | ||
293 | M3_DPLL_DIV_19 | M3_DPLL_MULT_19 | \ | ||
294 | MX_APLLS_CLIKIN_19_2 | ||
295 | /* boot (boot) */ | ||
296 | #define MB_DPLL_MULT (1 << 12) | ||
297 | #define MB_DPLL_DIV (0 << 8) | ||
298 | #define MB_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | MB_DPLL_DIV |\ | ||
299 | MB_DPLL_MULT | MX_APLLS_CLIKIN_12 | ||
300 | |||
301 | #define MB_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | MB_DPLL_DIV |\ | ||
302 | MB_DPLL_MULT | MX_APLLS_CLIKIN_13 | ||
303 | |||
304 | #define MB_CM_CLKSEL1_PLL_19_VAL MX_48M_SRC | MX_54M_SRC | MB_DPLL_DIV |\ | ||
305 | MB_DPLL_MULT | MX_APLLS_CLIKIN_19 | ||
306 | |||
307 | /* | ||
308 | * 2430 - chassis (sedna) | ||
309 | * 165 (ratio1) same as above #2 | ||
310 | * 150 (ratio1) | ||
311 | * 133 (ratio2) same as above #4 | ||
312 | * 110 (ratio2) same as above #3 | ||
313 | * 104 (ratio2) | ||
314 | * boot (boot) | ||
315 | */ | ||
316 | |||
317 | /* | ||
318 | * 2420 Equivalent - mode registers | ||
319 | * PRCM II , target DPLL = 2*300MHz = 600MHz | ||
320 | */ | ||
321 | #define MII_DPLL_MULT_12 (50 << 12) | ||
322 | #define MII_DPLL_DIV_12 (1 << 8) | ||
323 | #define MII_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | \ | ||
324 | MII_DPLL_DIV_12 | MII_DPLL_MULT_12 | \ | ||
325 | MX_APLLS_CLIKIN_12 | ||
326 | #define MII_DPLL_MULT_13 (300 << 12) | ||
327 | #define MII_DPLL_DIV_13 (12 << 8) | ||
328 | #define MII_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | \ | ||
329 | MII_DPLL_DIV_13 | MII_DPLL_MULT_13 | \ | ||
330 | MX_APLLS_CLIKIN_13 | ||
331 | |||
332 | /* PRCM III target DPLL = 2*266 = 532MHz*/ | ||
333 | #define MIII_DPLL_MULT_12 (133 << 12) | ||
334 | #define MIII_DPLL_DIV_12 (5 << 8) | ||
335 | #define MIII_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | \ | ||
336 | MIII_DPLL_DIV_12 | MIII_DPLL_MULT_12 | \ | ||
337 | MX_APLLS_CLIKIN_12 | ||
338 | #define MIII_DPLL_MULT_13 (266 << 12) | ||
339 | #define MIII_DPLL_DIV_13 (12 << 8) | ||
340 | #define MIII_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | \ | ||
341 | MIII_DPLL_DIV_13 | MIII_DPLL_MULT_13 | \ | ||
342 | MX_APLLS_CLIKIN_13 | ||
343 | |||
344 | /* PRCM VII (boot bypass) */ | ||
345 | #define MVII_CM_CLKSEL1_PLL_12_VAL MB_CM_CLKSEL1_PLL_12_VAL | ||
346 | #define MVII_CM_CLKSEL1_PLL_13_VAL MB_CM_CLKSEL1_PLL_13_VAL | ||
347 | |||
348 | /* High and low operation value */ | ||
349 | #define MX_CLKSEL2_PLL_2x_VAL (2 << 0) | ||
350 | #define MX_CLKSEL2_PLL_1x_VAL (1 << 0) | ||
351 | |||
352 | /* | ||
353 | * These represent optimal values for common parts, it won't work for all. | ||
354 | * As long as you scale down, most parameters are still work, they just | ||
355 | * become sub-optimal. The RFR value goes in the oppisite direction. If you | ||
356 | * don't adjust it down as your clock period increases the refresh interval | ||
357 | * will not be met. Setting all parameters for complete worst case may work, | ||
358 | * but may cut memory performance by 2x. Due to errata the DLLs need to be | ||
359 | * unlocked and their value needs run time calibration. A dynamic call is | ||
360 | * need for that as no single right value exists acorss production samples. | ||
361 | * | ||
362 | * Only the FULL speed values are given. Current code is such that rate | ||
363 | * changes must be made at DPLLoutx2. The actual value adjustment for low | ||
364 | * frequency operation will be handled by omap_set_performance() | ||
365 | * | ||
366 | * By having the boot loader boot up in the fastest L4 speed available likely | ||
367 | * will result in something which you can switch between. | ||
368 | */ | ||
369 | #define V24XX_SDRC_RFR_CTRL_133MHz (0x0003de00 | 1) | ||
370 | #define V24XX_SDRC_RFR_CTRL_100MHz (0x0002da01 | 1) | ||
371 | #define V24XX_SDRC_RFR_CTRL_110MHz (0x0002da01 | 1) /* Need to calc */ | ||
372 | #define V24XX_SDRC_RFR_CTRL_BYPASS (0x00005000 | 1) /* Need to calc */ | ||
373 | |||
374 | /* MPU speed defines */ | ||
375 | #define S12M 12000000 | ||
376 | #define S13M 13000000 | ||
377 | #define S19M 19200000 | ||
378 | #define S26M 26000000 | ||
379 | #define S100M 100000000 | ||
380 | #define S133M 133000000 | ||
381 | #define S150M 150000000 | ||
382 | #define S165M 165000000 | ||
383 | #define S200M 200000000 | ||
384 | #define S266M 266000000 | ||
385 | #define S300M 300000000 | ||
386 | #define S330M 330000000 | ||
387 | #define S400M 400000000 | ||
388 | #define S532M 532000000 | ||
389 | #define S600M 600000000 | ||
390 | #define S660M 660000000 | ||
391 | |||
392 | /*------------------------------------------------------------------------- | ||
393 | * Key dividers which make up a PRCM set. Ratio's for a PRCM are mandated. | ||
394 | * xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU, | ||
395 | * CM_CLKSEL_DSP, CM_CLKSEL_GFX, CM_CLKSEL1_CORE, CM_CLKSEL1_PLL, | ||
396 | * CM_CLKSEL2_PLL, CM_CLKSEL_MDM | ||
397 | * | ||
398 | * Filling in table based on H4 boards and 2430-SDPs variants available. | ||
399 | * There are quite a few more rates combinations which could be defined. | ||
400 | * | ||
401 | * When multiple values are defiend the start up will try and choose the | ||
402 | * fastest one. If a 'fast' value is defined, then automatically, the /2 | ||
403 | * one should be included as it can be used. Generally having more that | ||
404 | * one fast set does not make sense, as static timings need to be changed | ||
405 | * to change the set. The exception is the bypass setting which is | ||
406 | * availble for low power bypass. | ||
407 | * | ||
408 | * Note: This table needs to be sorted, fastest to slowest. | ||
409 | *-------------------------------------------------------------------------*/ | ||
410 | static struct prcm_config rate_table[] = { | ||
411 | /* PRCM II - FAST */ | ||
412 | {S12M, S600M, S300M, RII_CM_CLKSEL_MPU_VAL, /* 300MHz ARM */ | ||
413 | RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL, | ||
414 | RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_12_VAL, | ||
415 | MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_100MHz, | ||
416 | RATE_IN_242X}, | ||
417 | |||
418 | {S13M, S600M, S300M, RII_CM_CLKSEL_MPU_VAL, /* 300MHz ARM */ | ||
419 | RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL, | ||
420 | RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_13_VAL, | ||
421 | MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_100MHz, | ||
422 | RATE_IN_242X}, | ||
423 | |||
424 | /* PRCM III - FAST */ | ||
425 | {S12M, S532M, S266M, RIII_CM_CLKSEL_MPU_VAL, /* 266MHz ARM */ | ||
426 | RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL, | ||
427 | RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_12_VAL, | ||
428 | MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_133MHz, | ||
429 | RATE_IN_242X}, | ||
430 | |||
431 | {S13M, S532M, S266M, RIII_CM_CLKSEL_MPU_VAL, /* 266MHz ARM */ | ||
432 | RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL, | ||
433 | RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_13_VAL, | ||
434 | MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_133MHz, | ||
435 | RATE_IN_242X}, | ||
436 | |||
437 | /* PRCM II - SLOW */ | ||
438 | {S12M, S300M, S150M, RII_CM_CLKSEL_MPU_VAL, /* 150MHz ARM */ | ||
439 | RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL, | ||
440 | RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_12_VAL, | ||
441 | MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_100MHz, | ||
442 | RATE_IN_242X}, | ||
443 | |||
444 | {S13M, S300M, S150M, RII_CM_CLKSEL_MPU_VAL, /* 150MHz ARM */ | ||
445 | RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL, | ||
446 | RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_13_VAL, | ||
447 | MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_100MHz, | ||
448 | RATE_IN_242X}, | ||
449 | |||
450 | /* PRCM III - SLOW */ | ||
451 | {S12M, S266M, S133M, RIII_CM_CLKSEL_MPU_VAL, /* 133MHz ARM */ | ||
452 | RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL, | ||
453 | RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_12_VAL, | ||
454 | MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_133MHz, | ||
455 | RATE_IN_242X}, | ||
456 | |||
457 | {S13M, S266M, S133M, RIII_CM_CLKSEL_MPU_VAL, /* 133MHz ARM */ | ||
458 | RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL, | ||
459 | RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_13_VAL, | ||
460 | MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_133MHz, | ||
461 | RATE_IN_242X}, | ||
462 | |||
463 | /* PRCM-VII (boot-bypass) */ | ||
464 | {S12M, S12M, S12M, RVII_CM_CLKSEL_MPU_VAL, /* 12MHz ARM*/ | ||
465 | RVII_CM_CLKSEL_DSP_VAL, RVII_CM_CLKSEL_GFX_VAL, | ||
466 | RVII_CM_CLKSEL1_CORE_VAL, MVII_CM_CLKSEL1_PLL_12_VAL, | ||
467 | MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_BYPASS, | ||
468 | RATE_IN_242X}, | ||
469 | |||
470 | /* PRCM-VII (boot-bypass) */ | ||
471 | {S13M, S13M, S13M, RVII_CM_CLKSEL_MPU_VAL, /* 13MHz ARM */ | ||
472 | RVII_CM_CLKSEL_DSP_VAL, RVII_CM_CLKSEL_GFX_VAL, | ||
473 | RVII_CM_CLKSEL1_CORE_VAL, MVII_CM_CLKSEL1_PLL_13_VAL, | ||
474 | MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_BYPASS, | ||
475 | RATE_IN_242X}, | ||
476 | |||
477 | /* PRCM #3 - ratio2 (ES2) - FAST */ | ||
478 | {S13M, S660M, S330M, R2_CM_CLKSEL_MPU_VAL, /* 330MHz ARM */ | ||
479 | R2_CM_CLKSEL_DSP_VAL, R2_CM_CLKSEL_GFX_VAL, | ||
480 | R2_CM_CLKSEL1_CORE_VAL, M3_CM_CLKSEL1_PLL_13_VAL, | ||
481 | MX_CLKSEL2_PLL_2x_VAL, R2_CM_CLKSEL_MDM_VAL, | ||
482 | V24XX_SDRC_RFR_CTRL_110MHz, | ||
483 | RATE_IN_243X}, | ||
484 | |||
485 | /* PRCM #5a - ratio1 - FAST */ | ||
486 | {S13M, S532M, S266M, R1_CM_CLKSEL_MPU_VAL, /* 266MHz ARM */ | ||
487 | R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL, | ||
488 | R1_CM_CLKSEL1_CORE_VAL, M5A_CM_CLKSEL1_PLL_13_VAL, | ||
489 | MX_CLKSEL2_PLL_2x_VAL, R1_CM_CLKSEL_MDM_VAL, | ||
490 | V24XX_SDRC_RFR_CTRL_133MHz, | ||
491 | RATE_IN_243X}, | ||
492 | |||
493 | /* PRCM #5b - ratio1 - FAST */ | ||
494 | {S13M, S400M, S200M, R1_CM_CLKSEL_MPU_VAL, /* 200MHz ARM */ | ||
495 | R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL, | ||
496 | R1_CM_CLKSEL1_CORE_VAL, M5B_CM_CLKSEL1_PLL_13_VAL, | ||
497 | MX_CLKSEL2_PLL_2x_VAL, R1_CM_CLKSEL_MDM_VAL, | ||
498 | V24XX_SDRC_RFR_CTRL_100MHz, | ||
499 | RATE_IN_243X}, | ||
500 | |||
501 | /* PRCM #3 - ratio2 (ES2) - SLOW */ | ||
502 | {S13M, S330M, S165M, R2_CM_CLKSEL_MPU_VAL, /* 165MHz ARM */ | ||
503 | R2_CM_CLKSEL_DSP_VAL, R2_CM_CLKSEL_GFX_VAL, | ||
504 | R2_CM_CLKSEL1_CORE_VAL, M3_CM_CLKSEL1_PLL_13_VAL, | ||
505 | MX_CLKSEL2_PLL_1x_VAL, R2_CM_CLKSEL_MDM_VAL, | ||
506 | V24XX_SDRC_RFR_CTRL_110MHz, | ||
507 | RATE_IN_243X}, | ||
508 | |||
509 | /* PRCM #5a - ratio1 - SLOW */ | ||
510 | {S13M, S266M, S133M, R1_CM_CLKSEL_MPU_VAL, /* 133MHz ARM */ | ||
511 | R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL, | ||
512 | R1_CM_CLKSEL1_CORE_VAL, M5A_CM_CLKSEL1_PLL_13_VAL, | ||
513 | MX_CLKSEL2_PLL_1x_VAL, R1_CM_CLKSEL_MDM_VAL, | ||
514 | V24XX_SDRC_RFR_CTRL_133MHz, | ||
515 | RATE_IN_243X}, | ||
516 | |||
517 | /* PRCM #5b - ratio1 - SLOW*/ | ||
518 | {S13M, S200M, S100M, R1_CM_CLKSEL_MPU_VAL, /* 100MHz ARM */ | ||
519 | R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL, | ||
520 | R1_CM_CLKSEL1_CORE_VAL, M5B_CM_CLKSEL1_PLL_13_VAL, | ||
521 | MX_CLKSEL2_PLL_1x_VAL, R1_CM_CLKSEL_MDM_VAL, | ||
522 | V24XX_SDRC_RFR_CTRL_100MHz, | ||
523 | RATE_IN_243X}, | ||
524 | |||
525 | /* PRCM-boot/bypass */ | ||
526 | {S13M, S13M, S13M, RB_CM_CLKSEL_MPU_VAL, /* 13Mhz */ | ||
527 | RB_CM_CLKSEL_DSP_VAL, RB_CM_CLKSEL_GFX_VAL, | ||
528 | RB_CM_CLKSEL1_CORE_VAL, MB_CM_CLKSEL1_PLL_13_VAL, | ||
529 | MX_CLKSEL2_PLL_2x_VAL, RB_CM_CLKSEL_MDM_VAL, | ||
530 | V24XX_SDRC_RFR_CTRL_BYPASS, | ||
531 | RATE_IN_243X}, | ||
532 | |||
533 | /* PRCM-boot/bypass */ | ||
534 | {S12M, S12M, S12M, RB_CM_CLKSEL_MPU_VAL, /* 12Mhz */ | ||
535 | RB_CM_CLKSEL_DSP_VAL, RB_CM_CLKSEL_GFX_VAL, | ||
536 | RB_CM_CLKSEL1_CORE_VAL, MB_CM_CLKSEL1_PLL_12_VAL, | ||
537 | MX_CLKSEL2_PLL_2x_VAL, RB_CM_CLKSEL_MDM_VAL, | ||
538 | V24XX_SDRC_RFR_CTRL_BYPASS, | ||
539 | RATE_IN_243X}, | ||
540 | |||
541 | { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}, | ||
542 | }; | ||
543 | |||
544 | /*------------------------------------------------------------------------- | ||
545 | * 24xx clock tree. | ||
546 | * | ||
547 | * NOTE:In many cases here we are assigning a 'default' parent. In many | ||
548 | * cases the parent is selectable. The get/set parent calls will also | ||
549 | * switch sources. | ||
550 | * | ||
551 | * Many some clocks say always_enabled, but they can be auto idled for | ||
552 | * power savings. They will always be available upon clock request. | ||
553 | * | ||
554 | * Several sources are given initial rates which may be wrong, this will | ||
555 | * be fixed up in the init func. | ||
556 | * | ||
557 | * Things are broadly separated below by clock domains. It is | ||
558 | * noteworthy that most periferals have dependencies on multiple clock | ||
559 | * domains. Many get their interface clocks from the L4 domain, but get | ||
560 | * functional clocks from fixed sources or other core domain derived | ||
561 | * clocks. | ||
562 | *-------------------------------------------------------------------------*/ | ||
563 | |||
564 | /* Base external input clocks */ | ||
565 | static struct clk func_32k_ck = { | ||
566 | .name = "func_32k_ck", | ||
567 | .rate = 32000, | ||
568 | .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | | ||
569 | RATE_FIXED | ALWAYS_ENABLED, | ||
570 | }; | ||
571 | |||
572 | /* Typical 12/13MHz in standalone mode, will be 26Mhz in chassis mode */ | ||
573 | static struct clk osc_ck = { /* (*12, *13, 19.2, *26, 38.4)MHz */ | ||
574 | .name = "osc_ck", | ||
575 | .rate = 26000000, /* fixed up in clock init */ | ||
576 | .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | | ||
577 | RATE_FIXED | ALWAYS_ENABLED | RATE_PROPAGATES, | ||
578 | }; | ||
579 | |||
580 | /* With out modem likely 12MHz, with modem likely 13MHz */ | ||
581 | static struct clk sys_ck = { /* (*12, *13, 19.2, 26, 38.4)MHz */ | ||
582 | .name = "sys_ck", /* ~ ref_clk also */ | ||
583 | .parent = &osc_ck, | ||
584 | .rate = 13000000, | ||
585 | .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | | ||
586 | RATE_FIXED | ALWAYS_ENABLED | RATE_PROPAGATES, | ||
587 | .rate_offset = 6, /* sysclkdiv 1 or 2, already handled or no boot */ | ||
588 | .recalc = &omap2_sys_clk_recalc, | ||
589 | }; | ||
590 | |||
591 | static struct clk alt_ck = { /* Typical 54M or 48M, may not exist */ | ||
592 | .name = "alt_ck", | ||
593 | .rate = 54000000, | ||
594 | .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | | ||
595 | RATE_FIXED | ALWAYS_ENABLED | RATE_PROPAGATES, | ||
596 | .recalc = &omap2_propagate_rate, | ||
597 | }; | ||
598 | |||
599 | /* | ||
600 | * Analog domain root source clocks | ||
601 | */ | ||
602 | |||
603 | /* dpll_ck, is broken out in to special cases through clksel */ | ||
604 | static struct clk dpll_ck = { | ||
605 | .name = "dpll_ck", | ||
606 | .parent = &sys_ck, /* Can be func_32k also */ | ||
607 | .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | | ||
608 | RATE_PROPAGATES | RATE_CKCTL | CM_PLL_SEL1, | ||
609 | .recalc = &omap2_clksel_recalc, | ||
610 | }; | ||
611 | |||
612 | static struct clk apll96_ck = { | ||
613 | .name = "apll96_ck", | ||
614 | .parent = &sys_ck, | ||
615 | .rate = 96000000, | ||
616 | .flags = CLOCK_IN_OMAP242X |CLOCK_IN_OMAP243X | | ||
617 | RATE_FIXED | RATE_PROPAGATES, | ||
618 | .enable_reg = (void __iomem *)&CM_CLKEN_PLL, | ||
619 | .enable_bit = 0x2, | ||
620 | .recalc = &omap2_propagate_rate, | ||
621 | }; | ||
622 | |||
623 | static struct clk apll54_ck = { | ||
624 | .name = "apll54_ck", | ||
625 | .parent = &sys_ck, | ||
626 | .rate = 54000000, | ||
627 | .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | | ||
628 | RATE_FIXED | RATE_PROPAGATES, | ||
629 | .enable_reg = (void __iomem *)&CM_CLKEN_PLL, | ||
630 | .enable_bit = 0x6, | ||
631 | .recalc = &omap2_propagate_rate, | ||
632 | }; | ||
633 | |||
634 | /* | ||
635 | * PRCM digital base sources | ||
636 | */ | ||
637 | static struct clk func_54m_ck = { | ||
638 | .name = "func_54m_ck", | ||
639 | .parent = &apll54_ck, /* can also be alt_clk */ | ||
640 | .rate = 54000000, | ||
641 | .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | | ||
642 | RATE_FIXED | CM_PLL_SEL1 | RATE_PROPAGATES, | ||
643 | .src_offset = 5, | ||
644 | .enable_reg = (void __iomem *)&CM_CLKEN_PLL, | ||
645 | .enable_bit = 0xff, | ||
646 | .recalc = &omap2_propagate_rate, | ||
647 | }; | ||
648 | |||
649 | static struct clk core_ck = { | ||
650 | .name = "core_ck", | ||
651 | .parent = &dpll_ck, /* can also be 32k */ | ||
652 | .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | | ||
653 | ALWAYS_ENABLED | RATE_PROPAGATES, | ||
654 | .recalc = &omap2_propagate_rate, | ||
655 | }; | ||
656 | |||
657 | static struct clk sleep_ck = { /* sys_clk or 32k */ | ||
658 | .name = "sleep_ck", | ||
659 | .parent = &func_32k_ck, | ||
660 | .rate = 32000, | ||
661 | .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, | ||
662 | .recalc = &omap2_propagate_rate, | ||
663 | }; | ||
664 | |||
665 | static struct clk func_96m_ck = { | ||
666 | .name = "func_96m_ck", | ||
667 | .parent = &apll96_ck, | ||
668 | .rate = 96000000, | ||
669 | .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | | ||
670 | RATE_FIXED | RATE_PROPAGATES, | ||
671 | .enable_reg = (void __iomem *)&CM_CLKEN_PLL, | ||
672 | .enable_bit = 0xff, | ||
673 | .recalc = &omap2_propagate_rate, | ||
674 | }; | ||
675 | |||
676 | static struct clk func_48m_ck = { | ||
677 | .name = "func_48m_ck", | ||
678 | .parent = &apll96_ck, /* 96M or Alt */ | ||
679 | .rate = 48000000, | ||
680 | .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | | ||
681 | RATE_FIXED | CM_PLL_SEL1 | RATE_PROPAGATES, | ||
682 | .src_offset = 3, | ||
683 | .enable_reg = (void __iomem *)&CM_CLKEN_PLL, | ||
684 | .enable_bit = 0xff, | ||
685 | .recalc = &omap2_propagate_rate, | ||
686 | }; | ||
687 | |||
688 | static struct clk func_12m_ck = { | ||
689 | .name = "func_12m_ck", | ||
690 | .parent = &func_48m_ck, | ||
691 | .rate = 12000000, | ||
692 | .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | | ||
693 | RATE_FIXED | RATE_PROPAGATES, | ||
694 | .recalc = &omap2_propagate_rate, | ||
695 | .enable_reg = (void __iomem *)&CM_CLKEN_PLL, | ||
696 | .enable_bit = 0xff, | ||
697 | }; | ||
698 | |||
699 | /* Secure timer, only available in secure mode */ | ||
700 | static struct clk wdt1_osc_ck = { | ||
701 | .name = "ck_wdt1_osc", | ||
702 | .parent = &osc_ck, | ||
703 | .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, | ||
704 | .recalc = &omap2_followparent_recalc, | ||
705 | }; | ||
706 | |||
707 | static struct clk sys_clkout = { | ||
708 | .name = "sys_clkout", | ||
709 | .parent = &func_54m_ck, | ||
710 | .rate = 54000000, | ||
711 | .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | | ||
712 | CM_SYSCLKOUT_SEL1 | RATE_CKCTL, | ||
713 | .src_offset = 0, | ||
714 | .enable_reg = (void __iomem *)&PRCM_CLKOUT_CTRL, | ||
715 | .enable_bit = 7, | ||
716 | .rate_offset = 3, | ||
717 | .recalc = &omap2_clksel_recalc, | ||
718 | }; | ||
719 | |||
720 | /* In 2430, new in 2420 ES2 */ | ||
721 | static struct clk sys_clkout2 = { | ||
722 | .name = "sys_clkout2", | ||
723 | .parent = &func_54m_ck, | ||
724 | .rate = 54000000, | ||
725 | .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | | ||
726 | CM_SYSCLKOUT_SEL1 | RATE_CKCTL, | ||
727 | .src_offset = 8, | ||
728 | .enable_reg = (void __iomem *)&PRCM_CLKOUT_CTRL, | ||
729 | .enable_bit = 15, | ||
730 | .rate_offset = 11, | ||
731 | .recalc = &omap2_clksel_recalc, | ||
732 | }; | ||
733 | |||
734 | /* | ||
735 | * MPU clock domain | ||
736 | * Clocks: | ||
737 | * MPU_FCLK, MPU_ICLK | ||
738 | * INT_M_FCLK, INT_M_I_CLK | ||
739 | * | ||
740 | * - Individual clocks are hardware managed. | ||
741 | * - Base divider comes from: CM_CLKSEL_MPU | ||
742 | * | ||
743 | */ | ||
744 | static struct clk mpu_ck = { /* Control cpu */ | ||
745 | .name = "mpu_ck", | ||
746 | .parent = &core_ck, | ||
747 | .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | RATE_CKCTL | | ||
748 | ALWAYS_ENABLED | CM_MPU_SEL1 | DELAYED_APP | | ||
749 | CONFIG_PARTICIPANT | RATE_PROPAGATES, | ||
750 | .rate_offset = 0, /* bits 0-4 */ | ||
751 | .recalc = &omap2_clksel_recalc, | ||
752 | }; | ||
753 | |||
754 | /* | ||
755 | * DSP (2430-IVA2.1) (2420-UMA+IVA1) clock domain | ||
756 | * Clocks: | ||
757 | * 2430: IVA2.1_FCLK, IVA2.1_ICLK | ||
758 | * 2420: UMA_FCLK, UMA_ICLK, IVA_MPU, IVA_COP | ||
759 | */ | ||
760 | static struct clk iva2_1_fck = { | ||
761 | .name = "iva2_1_fck", | ||
762 | .parent = &core_ck, | ||
763 | .flags = CLOCK_IN_OMAP243X | RATE_CKCTL | CM_DSP_SEL1 | | ||
764 | DELAYED_APP | RATE_PROPAGATES | | ||
765 | CONFIG_PARTICIPANT, | ||
766 | .rate_offset = 0, | ||
767 | .enable_reg = (void __iomem *)&CM_FCLKEN_DSP, | ||
768 | .enable_bit = 0, | ||
769 | .recalc = &omap2_clksel_recalc, | ||
770 | }; | ||
771 | |||
772 | static struct clk iva2_1_ick = { | ||
773 | .name = "iva2_1_ick", | ||
774 | .parent = &iva2_1_fck, | ||
775 | .flags = CLOCK_IN_OMAP243X | RATE_CKCTL | CM_DSP_SEL1 | | ||
776 | DELAYED_APP | CONFIG_PARTICIPANT, | ||
777 | .rate_offset = 5, | ||
778 | .recalc = &omap2_clksel_recalc, | ||
779 | }; | ||
780 | |||
781 | /* | ||
782 | * Won't be too specific here. The core clock comes into this block | ||
783 | * it is divided then tee'ed. One branch goes directly to xyz enable | ||
784 | * controls. The other branch gets further divided by 2 then possibly | ||
785 | * routed into a synchronizer and out of clocks abc. | ||
786 | */ | ||
787 | static struct clk dsp_fck = { | ||
788 | .name = "dsp_fck", | ||
789 | .parent = &core_ck, | ||
790 | .flags = CLOCK_IN_OMAP242X | RATE_CKCTL | CM_DSP_SEL1 | | ||
791 | DELAYED_APP | CONFIG_PARTICIPANT | RATE_PROPAGATES, | ||
792 | .rate_offset = 0, | ||
793 | .enable_reg = (void __iomem *)&CM_FCLKEN_DSP, | ||
794 | .enable_bit = 0, | ||
795 | .recalc = &omap2_clksel_recalc, | ||
796 | }; | ||
797 | |||
798 | static struct clk dsp_ick = { | ||
799 | .name = "dsp_ick", /* apparently ipi and isp */ | ||
800 | .parent = &dsp_fck, | ||
801 | .flags = CLOCK_IN_OMAP242X | RATE_CKCTL | CM_DSP_SEL1 | | ||
802 | DELAYED_APP | CONFIG_PARTICIPANT, | ||
803 | .rate_offset = 5, | ||
804 | .enable_reg = (void __iomem *)&CM_ICLKEN_DSP, | ||
805 | .enable_bit = 1, /* for ipi */ | ||
806 | .recalc = &omap2_clksel_recalc, | ||
807 | }; | ||
808 | |||
809 | static struct clk iva1_ifck = { | ||
810 | .name = "iva1_ifck", | ||
811 | .parent = &core_ck, | ||
812 | .flags = CLOCK_IN_OMAP242X | CM_DSP_SEL1 | RATE_CKCTL | | ||
813 | CONFIG_PARTICIPANT | RATE_PROPAGATES | DELAYED_APP, | ||
814 | .rate_offset= 8, | ||
815 | .enable_reg = (void __iomem *)&CM_FCLKEN_DSP, | ||
816 | .enable_bit = 10, | ||
817 | .recalc = &omap2_clksel_recalc, | ||
818 | }; | ||
819 | |||
820 | /* IVA1 mpu/int/i/f clocks are /2 of parent */ | ||
821 | static struct clk iva1_mpu_int_ifck = { | ||
822 | .name = "iva1_mpu_int_ifck", | ||
823 | .parent = &iva1_ifck, | ||
824 | .flags = CLOCK_IN_OMAP242X | RATE_CKCTL | CM_DSP_SEL1, | ||
825 | .enable_reg = (void __iomem *)&CM_FCLKEN_DSP, | ||
826 | .enable_bit = 8, | ||
827 | .recalc = &omap2_clksel_recalc, | ||
828 | }; | ||
829 | |||
830 | /* | ||
831 | * L3 clock domain | ||
832 | * L3 clocks are used for both interface and functional clocks to | ||
833 | * multiple entities. Some of these clocks are completely managed | ||
834 | * by hardware, and some others allow software control. Hardware | ||
835 | * managed ones general are based on directly CLK_REQ signals and | ||
836 | * various auto idle settings. The functional spec sets many of these | ||
837 | * as 'tie-high' for their enables. | ||
838 | * | ||
839 | * I-CLOCKS: | ||
840 | * L3-Interconnect, SMS, GPMC, SDRC, OCM_RAM, OCM_ROM, SDMA | ||
841 | * CAM, HS-USB. | ||
842 | * F-CLOCK | ||
843 | * SSI. | ||
844 | * | ||
845 | * GPMC memories and SDRC have timing and clock sensitive registers which | ||
846 | * may very well need notification when the clock changes. Currently for low | ||
847 | * operating points, these are taken care of in sleep.S. | ||
848 | */ | ||
849 | static struct clk core_l3_ck = { /* Used for ick and fck, interconnect */ | ||
850 | .name = "core_l3_ck", | ||
851 | .parent = &core_ck, | ||
852 | .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | | ||
853 | RATE_CKCTL | ALWAYS_ENABLED | CM_CORE_SEL1 | | ||
854 | DELAYED_APP | CONFIG_PARTICIPANT | | ||
855 | RATE_PROPAGATES, | ||
856 | .rate_offset = 0, | ||
857 | .recalc = &omap2_clksel_recalc, | ||
858 | }; | ||
859 | |||
860 | static struct clk usb_l4_ick = { /* FS-USB interface clock */ | ||
861 | .name = "usb_l4_ick", | ||
862 | .parent = &core_ck, | ||
863 | .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | | ||
864 | RATE_CKCTL | CM_CORE_SEL1 | DELAYED_APP | | ||
865 | CONFIG_PARTICIPANT, | ||
866 | .enable_reg = (void __iomem *)&CM_ICLKEN2_CORE, | ||
867 | .enable_bit = 0, | ||
868 | .rate_offset = 25, | ||
869 | .recalc = &omap2_clksel_recalc, | ||
870 | }; | ||
871 | |||
872 | /* | ||
873 | * SSI is in L3 management domain, its direct parent is core not l3, | ||
874 | * many core power domain entities are grouped into the L3 clock | ||
875 | * domain. | ||
876 | * SSI_SSR_FCLK, SSI_SST_FCLK, SSI_L4_CLIK | ||
877 | * | ||
878 | * ssr = core/1/2/3/4/5, sst = 1/2 ssr. | ||
879 | */ | ||
880 | static struct clk ssi_ssr_sst_fck = { | ||
881 | .name = "ssi_fck", | ||
882 | .parent = &core_ck, | ||
883 | .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | | ||
884 | RATE_CKCTL | CM_CORE_SEL1 | DELAYED_APP, | ||
885 | .enable_reg = (void __iomem *)&CM_FCLKEN2_CORE, /* bit 1 */ | ||
886 | .enable_bit = 1, | ||
887 | .rate_offset = 20, | ||
888 | .recalc = &omap2_clksel_recalc, | ||
889 | }; | ||
890 | |||
891 | /* | ||
892 | * GFX clock domain | ||
893 | * Clocks: | ||
894 | * GFX_FCLK, GFX_ICLK | ||
895 | * GFX_CG1(2d), GFX_CG2(3d) | ||
896 | * | ||
897 | * GFX_FCLK runs from L3, and is divided by (1,2,3,4) | ||
898 | * The 2d and 3d clocks run at a hardware determined | ||
899 | * divided value of fclk. | ||
900 | * | ||
901 | */ | ||
902 | static struct clk gfx_3d_fck = { | ||
903 | .name = "gfx_3d_fck", | ||
904 | .parent = &core_l3_ck, | ||
905 | .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | | ||
906 | RATE_CKCTL | CM_GFX_SEL1, | ||
907 | .enable_reg = (void __iomem *)&CM_FCLKEN_GFX, | ||
908 | .enable_bit = 2, | ||
909 | .rate_offset= 0, | ||
910 | .recalc = &omap2_clksel_recalc, | ||
911 | }; | ||
912 | |||
913 | static struct clk gfx_2d_fck = { | ||
914 | .name = "gfx_2d_fck", | ||
915 | .parent = &core_l3_ck, | ||
916 | .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | | ||
917 | RATE_CKCTL | CM_GFX_SEL1, | ||
918 | .enable_reg = (void __iomem *)&CM_FCLKEN_GFX, | ||
919 | .enable_bit = 1, | ||
920 | .rate_offset= 0, | ||
921 | .recalc = &omap2_clksel_recalc, | ||
922 | }; | ||
923 | |||
924 | static struct clk gfx_ick = { | ||
925 | .name = "gfx_ick", /* From l3 */ | ||
926 | .parent = &core_l3_ck, | ||
927 | .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | | ||
928 | RATE_CKCTL, | ||
929 | .enable_reg = (void __iomem *)&CM_ICLKEN_GFX, /* bit 0 */ | ||
930 | .enable_bit = 0, | ||
931 | .recalc = &omap2_followparent_recalc, | ||
932 | }; | ||
933 | |||
934 | /* | ||
935 | * Modem clock domain (2430) | ||
936 | * CLOCKS: | ||
937 | * MDM_OSC_CLK | ||
938 | * MDM_ICLK | ||
939 | */ | ||
940 | static struct clk mdm_ick = { /* used both as a ick and fck */ | ||
941 | .name = "mdm_ick", | ||
942 | .parent = &core_ck, | ||
943 | .flags = CLOCK_IN_OMAP243X | RATE_CKCTL | CM_MODEM_SEL1 | | ||
944 | DELAYED_APP | CONFIG_PARTICIPANT, | ||
945 | .rate_offset = 0, | ||
946 | .enable_reg = (void __iomem *)&CM_ICLKEN_MDM, | ||
947 | .enable_bit = 0, | ||
948 | .recalc = &omap2_clksel_recalc, | ||
949 | }; | ||
950 | |||
951 | static struct clk mdm_osc_ck = { | ||
952 | .name = "mdm_osc_ck", | ||
953 | .rate = 26000000, | ||
954 | .parent = &osc_ck, | ||
955 | .flags = CLOCK_IN_OMAP243X | RATE_FIXED, | ||
956 | .enable_reg = (void __iomem *)&CM_FCLKEN_MDM, | ||
957 | .enable_bit = 1, | ||
958 | .recalc = &omap2_followparent_recalc, | ||
959 | }; | ||
960 | |||
961 | /* | ||
962 | * L4 clock management domain | ||
963 | * | ||
964 | * This domain contains lots of interface clocks from the L4 interface, some | ||
965 | * functional clocks. Fixed APLL functional source clocks are managed in | ||
966 | * this domain. | ||
967 | */ | ||
968 | static struct clk l4_ck = { /* used both as an ick and fck */ | ||
969 | .name = "l4_ck", | ||
970 | .parent = &core_l3_ck, | ||
971 | .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | | ||
972 | RATE_CKCTL | ALWAYS_ENABLED | CM_CORE_SEL1 | | ||
973 | DELAYED_APP | RATE_PROPAGATES, | ||
974 | .rate_offset = 5, | ||
975 | .recalc = &omap2_clksel_recalc, | ||
976 | }; | ||
977 | |||
978 | static struct clk ssi_l4_ick = { | ||
979 | .name = "ssi_l4_ick", | ||
980 | .parent = &l4_ck, | ||
981 | .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | RATE_CKCTL, | ||
982 | .enable_reg = (void __iomem *)&CM_ICLKEN2_CORE, /* bit 1 */ | ||
983 | .enable_bit = 1, | ||
984 | .recalc = &omap2_followparent_recalc, | ||
985 | }; | ||
986 | |||
987 | /* | ||
988 | * DSS clock domain | ||
989 | * CLOCKs: | ||
990 | * DSS_L4_ICLK, DSS_L3_ICLK, | ||
991 | * DSS_CLK1, DSS_CLK2, DSS_54MHz_CLK | ||
992 | * | ||
993 | * DSS is both initiator and target. | ||
994 | */ | ||
995 | static struct clk dss_ick = { /* Enables both L3,L4 ICLK's */ | ||
996 | .name = "dss_ick", | ||
997 | .parent = &l4_ck, /* really both l3 and l4 */ | ||
998 | .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | RATE_CKCTL, | ||
999 | .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, | ||
1000 | .enable_bit = 0, | ||
1001 | .recalc = &omap2_followparent_recalc, | ||
1002 | }; | ||
1003 | |||
1004 | static struct clk dss1_fck = { | ||
1005 | .name = "dss1_fck", | ||
1006 | .parent = &core_ck, /* Core or sys */ | ||
1007 | .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | | ||
1008 | RATE_CKCTL | CM_CORE_SEL1 | DELAYED_APP, | ||
1009 | .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, | ||
1010 | .enable_bit = 0, | ||
1011 | .rate_offset = 8, | ||
1012 | .src_offset = 8, | ||
1013 | .recalc = &omap2_clksel_recalc, | ||
1014 | }; | ||
1015 | |||
1016 | static struct clk dss2_fck = { /* Alt clk used in power management */ | ||
1017 | .name = "dss2_fck", | ||
1018 | .parent = &sys_ck, /* fixed at sys_ck or 48MHz */ | ||
1019 | .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | | ||
1020 | RATE_CKCTL | CM_CORE_SEL1 | RATE_FIXED, | ||
1021 | .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, | ||
1022 | .enable_bit = 1, | ||
1023 | .src_offset = 13, | ||
1024 | .recalc = &omap2_followparent_recalc, | ||
1025 | }; | ||
1026 | |||
1027 | static struct clk dss_54m_fck = { /* Alt clk used in power management */ | ||
1028 | .name = "dss_54m_fck", /* 54m tv clk */ | ||
1029 | .parent = &func_54m_ck, | ||
1030 | .rate = 54000000, | ||
1031 | .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | | ||
1032 | RATE_FIXED | RATE_PROPAGATES, | ||
1033 | .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, | ||
1034 | .enable_bit = 2, | ||
1035 | .recalc = &omap2_propagate_rate, | ||
1036 | }; | ||
1037 | |||
1038 | /* | ||
1039 | * CORE power domain ICLK & FCLK defines. | ||
1040 | * Many of the these can have more than one possible parent. Entries | ||
1041 | * here will likely have an L4 interface parent, and may have multiple | ||
1042 | * functional clock parents. | ||
1043 | */ | ||
1044 | static struct clk gpt1_ick = { | ||
1045 | .name = "gpt1_ick", | ||
1046 | .parent = &l4_ck, | ||
1047 | .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, | ||
1048 | .enable_reg = (void __iomem *)&CM_ICLKEN_WKUP, /* Bit4 */ | ||
1049 | .enable_bit = 0, | ||
1050 | .recalc = &omap2_followparent_recalc, | ||
1051 | }; | ||
1052 | |||
1053 | static struct clk gpt1_fck = { | ||
1054 | .name = "gpt1_fck", | ||
1055 | .parent = &func_32k_ck, | ||
1056 | .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | | ||
1057 | CM_WKUP_SEL1, | ||
1058 | .enable_reg = (void __iomem *)&CM_FCLKEN_WKUP, | ||
1059 | .enable_bit = 0, | ||
1060 | .src_offset = 0, | ||
1061 | .recalc = &omap2_followparent_recalc, | ||
1062 | }; | ||
1063 | |||
1064 | static struct clk gpt2_ick = { | ||
1065 | .name = "gpt2_ick", | ||
1066 | .parent = &l4_ck, | ||
1067 | .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, | ||
1068 | .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, /* bit4 */ | ||
1069 | .enable_bit = 0, | ||
1070 | .recalc = &omap2_followparent_recalc, | ||
1071 | }; | ||
1072 | |||
1073 | static struct clk gpt2_fck = { | ||
1074 | .name = "gpt2_fck", | ||
1075 | .parent = &func_32k_ck, | ||
1076 | .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | | ||
1077 | CM_CORE_SEL2, | ||
1078 | .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, | ||
1079 | .enable_bit = 4, | ||
1080 | .src_offset = 2, | ||
1081 | .recalc = &omap2_followparent_recalc, | ||
1082 | }; | ||
1083 | |||
1084 | static struct clk gpt3_ick = { | ||
1085 | .name = "gpt3_ick", | ||
1086 | .parent = &l4_ck, | ||
1087 | .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, | ||
1088 | .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, /* Bit5 */ | ||
1089 | .enable_bit = 5, | ||
1090 | .recalc = &omap2_followparent_recalc, | ||
1091 | }; | ||
1092 | |||
1093 | static struct clk gpt3_fck = { | ||
1094 | .name = "gpt3_fck", | ||
1095 | .parent = &func_32k_ck, | ||
1096 | .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | | ||
1097 | CM_CORE_SEL2, | ||
1098 | .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, | ||
1099 | .enable_bit = 5, | ||
1100 | .src_offset = 4, | ||
1101 | .recalc = &omap2_followparent_recalc, | ||
1102 | }; | ||
1103 | |||
1104 | static struct clk gpt4_ick = { | ||
1105 | .name = "gpt4_ick", | ||
1106 | .parent = &l4_ck, | ||
1107 | .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, | ||
1108 | .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, /* Bit6 */ | ||
1109 | .enable_bit = 6, | ||
1110 | .recalc = &omap2_followparent_recalc, | ||
1111 | }; | ||
1112 | |||
1113 | static struct clk gpt4_fck = { | ||
1114 | .name = "gpt4_fck", | ||
1115 | .parent = &func_32k_ck, | ||
1116 | .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | | ||
1117 | CM_CORE_SEL2, | ||
1118 | .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, | ||
1119 | .enable_bit = 6, | ||
1120 | .src_offset = 6, | ||
1121 | .recalc = &omap2_followparent_recalc, | ||
1122 | }; | ||
1123 | |||
1124 | static struct clk gpt5_ick = { | ||
1125 | .name = "gpt5_ick", | ||
1126 | .parent = &l4_ck, | ||
1127 | .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, | ||
1128 | .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, /* Bit7 */ | ||
1129 | .enable_bit = 7, | ||
1130 | .recalc = &omap2_followparent_recalc, | ||
1131 | }; | ||
1132 | |||
1133 | static struct clk gpt5_fck = { | ||
1134 | .name = "gpt5_fck", | ||
1135 | .parent = &func_32k_ck, | ||
1136 | .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | | ||
1137 | CM_CORE_SEL2, | ||
1138 | .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, | ||
1139 | .enable_bit = 7, | ||
1140 | .src_offset = 8, | ||
1141 | .recalc = &omap2_followparent_recalc, | ||
1142 | }; | ||
1143 | |||
1144 | static struct clk gpt6_ick = { | ||
1145 | .name = "gpt6_ick", | ||
1146 | .parent = &l4_ck, | ||
1147 | .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, | ||
1148 | .enable_bit = 8, | ||
1149 | .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, /* bit8 */ | ||
1150 | .recalc = &omap2_followparent_recalc, | ||
1151 | }; | ||
1152 | |||
1153 | static struct clk gpt6_fck = { | ||
1154 | .name = "gpt6_fck", | ||
1155 | .parent = &func_32k_ck, | ||
1156 | .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | | ||
1157 | CM_CORE_SEL2, | ||
1158 | .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, | ||
1159 | .enable_bit = 8, | ||
1160 | .src_offset = 10, | ||
1161 | .recalc = &omap2_followparent_recalc, | ||
1162 | }; | ||
1163 | |||
1164 | static struct clk gpt7_ick = { | ||
1165 | .name = "gpt7_ick", | ||
1166 | .parent = &l4_ck, | ||
1167 | .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, | ||
1168 | .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, /* bit9 */ | ||
1169 | .enable_bit = 9, | ||
1170 | .recalc = &omap2_followparent_recalc, | ||
1171 | }; | ||
1172 | |||
1173 | static struct clk gpt7_fck = { | ||
1174 | .name = "gpt7_fck", | ||
1175 | .parent = &func_32k_ck, | ||
1176 | .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | | ||
1177 | CM_CORE_SEL2, | ||
1178 | .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, | ||
1179 | .enable_bit = 9, | ||
1180 | .src_offset = 12, | ||
1181 | .recalc = &omap2_followparent_recalc, | ||
1182 | }; | ||
1183 | |||
1184 | static struct clk gpt8_ick = { | ||
1185 | .name = "gpt8_ick", | ||
1186 | .parent = &l4_ck, | ||
1187 | .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, | ||
1188 | .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, /* bit10 */ | ||
1189 | .enable_bit = 10, | ||
1190 | .recalc = &omap2_followparent_recalc, | ||
1191 | }; | ||
1192 | |||
1193 | static struct clk gpt8_fck = { | ||
1194 | .name = "gpt8_fck", | ||
1195 | .parent = &func_32k_ck, | ||
1196 | .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | | ||
1197 | CM_CORE_SEL2, | ||
1198 | .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, | ||
1199 | .enable_bit = 10, | ||
1200 | .src_offset = 14, | ||
1201 | .recalc = &omap2_followparent_recalc, | ||
1202 | }; | ||
1203 | |||
1204 | static struct clk gpt9_ick = { | ||
1205 | .name = "gpt9_ick", | ||
1206 | .parent = &l4_ck, | ||
1207 | .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, | ||
1208 | .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, | ||
1209 | .enable_bit = 11, | ||
1210 | .recalc = &omap2_followparent_recalc, | ||
1211 | }; | ||
1212 | |||
1213 | static struct clk gpt9_fck = { | ||
1214 | .name = "gpt9_fck", | ||
1215 | .parent = &func_32k_ck, | ||
1216 | .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | | ||
1217 | CM_CORE_SEL2, | ||
1218 | .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, | ||
1219 | .enable_bit = 11, | ||
1220 | .src_offset = 16, | ||
1221 | .recalc = &omap2_followparent_recalc, | ||
1222 | }; | ||
1223 | |||
1224 | static struct clk gpt10_ick = { | ||
1225 | .name = "gpt10_ick", | ||
1226 | .parent = &l4_ck, | ||
1227 | .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, | ||
1228 | .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, | ||
1229 | .enable_bit = 12, | ||
1230 | .recalc = &omap2_followparent_recalc, | ||
1231 | }; | ||
1232 | |||
1233 | static struct clk gpt10_fck = { | ||
1234 | .name = "gpt10_fck", | ||
1235 | .parent = &func_32k_ck, | ||
1236 | .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | | ||
1237 | CM_CORE_SEL2, | ||
1238 | .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, | ||
1239 | .enable_bit = 12, | ||
1240 | .src_offset = 18, | ||
1241 | .recalc = &omap2_followparent_recalc, | ||
1242 | }; | ||
1243 | |||
1244 | static struct clk gpt11_ick = { | ||
1245 | .name = "gpt11_ick", | ||
1246 | .parent = &l4_ck, | ||
1247 | .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, | ||
1248 | .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, | ||
1249 | .enable_bit = 13, | ||
1250 | .recalc = &omap2_followparent_recalc, | ||
1251 | }; | ||
1252 | |||
1253 | static struct clk gpt11_fck = { | ||
1254 | .name = "gpt11_fck", | ||
1255 | .parent = &func_32k_ck, | ||
1256 | .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | | ||
1257 | CM_CORE_SEL2, | ||
1258 | .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, | ||
1259 | .enable_bit = 13, | ||
1260 | .src_offset = 20, | ||
1261 | .recalc = &omap2_followparent_recalc, | ||
1262 | }; | ||
1263 | |||
1264 | static struct clk gpt12_ick = { | ||
1265 | .name = "gpt12_ick", | ||
1266 | .parent = &l4_ck, | ||
1267 | .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, | ||
1268 | .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, /* bit14 */ | ||
1269 | .enable_bit = 14, | ||
1270 | .recalc = &omap2_followparent_recalc, | ||
1271 | }; | ||
1272 | |||
1273 | static struct clk gpt12_fck = { | ||
1274 | .name = "gpt12_fck", | ||
1275 | .parent = &func_32k_ck, | ||
1276 | .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | | ||
1277 | CM_CORE_SEL2, | ||
1278 | .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, | ||
1279 | .enable_bit = 14, | ||
1280 | .src_offset = 22, | ||
1281 | .recalc = &omap2_followparent_recalc, | ||
1282 | }; | ||
1283 | |||
1284 | static struct clk mcbsp1_ick = { | ||
1285 | .name = "mcbsp1_ick", | ||
1286 | .parent = &l4_ck, | ||
1287 | .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, | ||
1288 | .enable_bit = 15, | ||
1289 | .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, /* bit16 */ | ||
1290 | .recalc = &omap2_followparent_recalc, | ||
1291 | }; | ||
1292 | |||
1293 | static struct clk mcbsp1_fck = { | ||
1294 | .name = "mcbsp1_fck", | ||
1295 | .parent = &func_96m_ck, | ||
1296 | .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, | ||
1297 | .enable_bit = 15, | ||
1298 | .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, | ||
1299 | .recalc = &omap2_followparent_recalc, | ||
1300 | }; | ||
1301 | |||
1302 | static struct clk mcbsp2_ick = { | ||
1303 | .name = "mcbsp2_ick", | ||
1304 | .parent = &l4_ck, | ||
1305 | .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, | ||
1306 | .enable_bit = 16, | ||
1307 | .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, | ||
1308 | .recalc = &omap2_followparent_recalc, | ||
1309 | }; | ||
1310 | |||
1311 | static struct clk mcbsp2_fck = { | ||
1312 | .name = "mcbsp2_fck", | ||
1313 | .parent = &func_96m_ck, | ||
1314 | .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, | ||
1315 | .enable_bit = 16, | ||
1316 | .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, | ||
1317 | .recalc = &omap2_followparent_recalc, | ||
1318 | }; | ||
1319 | |||
1320 | static struct clk mcbsp3_ick = { | ||
1321 | .name = "mcbsp3_ick", | ||
1322 | .parent = &l4_ck, | ||
1323 | .flags = CLOCK_IN_OMAP243X, | ||
1324 | .enable_reg = (void __iomem *)&CM_ICLKEN2_CORE, | ||
1325 | .enable_bit = 3, | ||
1326 | .recalc = &omap2_followparent_recalc, | ||
1327 | }; | ||
1328 | |||
1329 | static struct clk mcbsp3_fck = { | ||
1330 | .name = "mcbsp3_fck", | ||
1331 | .parent = &func_96m_ck, | ||
1332 | .flags = CLOCK_IN_OMAP243X, | ||
1333 | .enable_reg = (void __iomem *)&CM_FCLKEN2_CORE, | ||
1334 | .enable_bit = 3, | ||
1335 | .recalc = &omap2_followparent_recalc, | ||
1336 | }; | ||
1337 | |||
1338 | static struct clk mcbsp4_ick = { | ||
1339 | .name = "mcbsp4_ick", | ||
1340 | .parent = &l4_ck, | ||
1341 | .flags = CLOCK_IN_OMAP243X, | ||
1342 | .enable_reg = (void __iomem *)&CM_ICLKEN2_CORE, | ||
1343 | .enable_bit = 4, | ||
1344 | .recalc = &omap2_followparent_recalc, | ||
1345 | }; | ||
1346 | |||
1347 | static struct clk mcbsp4_fck = { | ||
1348 | .name = "mcbsp4_fck", | ||
1349 | .parent = &func_96m_ck, | ||
1350 | .flags = CLOCK_IN_OMAP243X, | ||
1351 | .enable_reg = (void __iomem *)&CM_FCLKEN2_CORE, | ||
1352 | .enable_bit = 4, | ||
1353 | .recalc = &omap2_followparent_recalc, | ||
1354 | }; | ||
1355 | |||
1356 | static struct clk mcbsp5_ick = { | ||
1357 | .name = "mcbsp5_ick", | ||
1358 | .parent = &l4_ck, | ||
1359 | .flags = CLOCK_IN_OMAP243X, | ||
1360 | .enable_reg = (void __iomem *)&CM_ICLKEN2_CORE, | ||
1361 | .enable_bit = 5, | ||
1362 | .recalc = &omap2_followparent_recalc, | ||
1363 | }; | ||
1364 | |||
1365 | static struct clk mcbsp5_fck = { | ||
1366 | .name = "mcbsp5_fck", | ||
1367 | .parent = &func_96m_ck, | ||
1368 | .flags = CLOCK_IN_OMAP243X, | ||
1369 | .enable_reg = (void __iomem *)&CM_FCLKEN2_CORE, | ||
1370 | .enable_bit = 5, | ||
1371 | .recalc = &omap2_followparent_recalc, | ||
1372 | }; | ||
1373 | |||
1374 | static struct clk mcspi1_ick = { | ||
1375 | .name = "mcspi1_ick", | ||
1376 | .parent = &l4_ck, | ||
1377 | .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, | ||
1378 | .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, | ||
1379 | .enable_bit = 17, | ||
1380 | .recalc = &omap2_followparent_recalc, | ||
1381 | }; | ||
1382 | |||
1383 | static struct clk mcspi1_fck = { | ||
1384 | .name = "mcspi1_fck", | ||
1385 | .parent = &func_48m_ck, | ||
1386 | .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, | ||
1387 | .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, | ||
1388 | .enable_bit = 17, | ||
1389 | .recalc = &omap2_followparent_recalc, | ||
1390 | }; | ||
1391 | |||
1392 | static struct clk mcspi2_ick = { | ||
1393 | .name = "mcspi2_ick", | ||
1394 | .parent = &l4_ck, | ||
1395 | .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, | ||
1396 | .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, | ||
1397 | .enable_bit = 18, | ||
1398 | .recalc = &omap2_followparent_recalc, | ||
1399 | }; | ||
1400 | |||
1401 | static struct clk mcspi2_fck = { | ||
1402 | .name = "mcspi2_fck", | ||
1403 | .parent = &func_48m_ck, | ||
1404 | .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, | ||
1405 | .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, | ||
1406 | .enable_bit = 18, | ||
1407 | .recalc = &omap2_followparent_recalc, | ||
1408 | }; | ||
1409 | |||
1410 | static struct clk mcspi3_ick = { | ||
1411 | .name = "mcspi3_ick", | ||
1412 | .parent = &l4_ck, | ||
1413 | .flags = CLOCK_IN_OMAP243X, | ||
1414 | .enable_reg = (void __iomem *)&CM_ICLKEN2_CORE, | ||
1415 | .enable_bit = 9, | ||
1416 | .recalc = &omap2_followparent_recalc, | ||
1417 | }; | ||
1418 | |||
1419 | static struct clk mcspi3_fck = { | ||
1420 | .name = "mcspi3_fck", | ||
1421 | .parent = &func_48m_ck, | ||
1422 | .flags = CLOCK_IN_OMAP243X, | ||
1423 | .enable_reg = (void __iomem *)&CM_FCLKEN2_CORE, | ||
1424 | .enable_bit = 9, | ||
1425 | .recalc = &omap2_followparent_recalc, | ||
1426 | }; | ||
1427 | |||
1428 | static struct clk uart1_ick = { | ||
1429 | .name = "uart1_ick", | ||
1430 | .parent = &l4_ck, | ||
1431 | .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, | ||
1432 | .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, | ||
1433 | .enable_bit = 21, | ||
1434 | .recalc = &omap2_followparent_recalc, | ||
1435 | }; | ||
1436 | |||
1437 | static struct clk uart1_fck = { | ||
1438 | .name = "uart1_fck", | ||
1439 | .parent = &func_48m_ck, | ||
1440 | .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, | ||
1441 | .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, | ||
1442 | .enable_bit = 21, | ||
1443 | .recalc = &omap2_followparent_recalc, | ||
1444 | }; | ||
1445 | |||
1446 | static struct clk uart2_ick = { | ||
1447 | .name = "uart2_ick", | ||
1448 | .parent = &l4_ck, | ||
1449 | .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, | ||
1450 | .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, | ||
1451 | .enable_bit = 22, | ||
1452 | .recalc = &omap2_followparent_recalc, | ||
1453 | }; | ||
1454 | |||
1455 | static struct clk uart2_fck = { | ||
1456 | .name = "uart2_fck", | ||
1457 | .parent = &func_48m_ck, | ||
1458 | .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, | ||
1459 | .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, | ||
1460 | .enable_bit = 22, | ||
1461 | .recalc = &omap2_followparent_recalc, | ||
1462 | }; | ||
1463 | |||
1464 | static struct clk uart3_ick = { | ||
1465 | .name = "uart3_ick", | ||
1466 | .parent = &l4_ck, | ||
1467 | .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, | ||
1468 | .enable_reg = (void __iomem *)&CM_ICLKEN2_CORE, | ||
1469 | .enable_bit = 2, | ||
1470 | .recalc = &omap2_followparent_recalc, | ||
1471 | }; | ||
1472 | |||
1473 | static struct clk uart3_fck = { | ||
1474 | .name = "uart3_fck", | ||
1475 | .parent = &func_48m_ck, | ||
1476 | .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, | ||
1477 | .enable_reg = (void __iomem *)&CM_FCLKEN2_CORE, | ||
1478 | .enable_bit = 2, | ||
1479 | .recalc = &omap2_followparent_recalc, | ||
1480 | }; | ||
1481 | |||
1482 | static struct clk gpios_ick = { | ||
1483 | .name = "gpios_ick", | ||
1484 | .parent = &l4_ck, | ||
1485 | .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, | ||
1486 | .enable_reg = (void __iomem *)&CM_ICLKEN_WKUP, | ||
1487 | .enable_bit = 2, | ||
1488 | .recalc = &omap2_followparent_recalc, | ||
1489 | }; | ||
1490 | |||
1491 | static struct clk gpios_fck = { | ||
1492 | .name = "gpios_fck", | ||
1493 | .parent = &func_32k_ck, | ||
1494 | .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, | ||
1495 | .enable_reg = (void __iomem *)&CM_FCLKEN_WKUP, | ||
1496 | .enable_bit = 2, | ||
1497 | .recalc = &omap2_followparent_recalc, | ||
1498 | }; | ||
1499 | |||
1500 | static struct clk mpu_wdt_ick = { | ||
1501 | .name = "mpu_wdt_ick", | ||
1502 | .parent = &l4_ck, | ||
1503 | .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, | ||
1504 | .enable_reg = (void __iomem *)&CM_ICLKEN_WKUP, | ||
1505 | .enable_bit = 3, | ||
1506 | .recalc = &omap2_followparent_recalc, | ||
1507 | }; | ||
1508 | |||
1509 | static struct clk mpu_wdt_fck = { | ||
1510 | .name = "mpu_wdt_fck", | ||
1511 | .parent = &func_32k_ck, | ||
1512 | .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, | ||
1513 | .enable_reg = (void __iomem *)&CM_FCLKEN_WKUP, | ||
1514 | .enable_bit = 3, | ||
1515 | .recalc = &omap2_followparent_recalc, | ||
1516 | }; | ||
1517 | |||
1518 | static struct clk sync_32k_ick = { | ||
1519 | .name = "sync_32k_ick", | ||
1520 | .parent = &l4_ck, | ||
1521 | .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, | ||
1522 | .enable_reg = (void __iomem *)&CM_ICLKEN_WKUP, | ||
1523 | .enable_bit = 1, | ||
1524 | .recalc = &omap2_followparent_recalc, | ||
1525 | }; | ||
1526 | static struct clk wdt1_ick = { | ||
1527 | .name = "wdt1_ick", | ||
1528 | .parent = &l4_ck, | ||
1529 | .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, | ||
1530 | .enable_reg = (void __iomem *)&CM_ICLKEN_WKUP, | ||
1531 | .enable_bit = 4, | ||
1532 | .recalc = &omap2_followparent_recalc, | ||
1533 | }; | ||
1534 | static struct clk omapctrl_ick = { | ||
1535 | .name = "omapctrl_ick", | ||
1536 | .parent = &l4_ck, | ||
1537 | .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, | ||
1538 | .enable_reg = (void __iomem *)&CM_ICLKEN_WKUP, | ||
1539 | .enable_bit = 5, | ||
1540 | .recalc = &omap2_followparent_recalc, | ||
1541 | }; | ||
1542 | static struct clk icr_ick = { | ||
1543 | .name = "icr_ick", | ||
1544 | .parent = &l4_ck, | ||
1545 | .flags = CLOCK_IN_OMAP243X, | ||
1546 | .enable_reg = (void __iomem *)&CM_ICLKEN_WKUP, | ||
1547 | .enable_bit = 6, | ||
1548 | .recalc = &omap2_followparent_recalc, | ||
1549 | }; | ||
1550 | |||
1551 | static struct clk cam_ick = { | ||
1552 | .name = "cam_ick", | ||
1553 | .parent = &l4_ck, | ||
1554 | .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, | ||
1555 | .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, | ||
1556 | .enable_bit = 31, | ||
1557 | .recalc = &omap2_followparent_recalc, | ||
1558 | }; | ||
1559 | |||
1560 | static struct clk cam_fck = { | ||
1561 | .name = "cam_fck", | ||
1562 | .parent = &func_96m_ck, | ||
1563 | .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, | ||
1564 | .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, | ||
1565 | .enable_bit = 31, | ||
1566 | .recalc = &omap2_followparent_recalc, | ||
1567 | }; | ||
1568 | |||
1569 | static struct clk mailboxes_ick = { | ||
1570 | .name = "mailboxes_ick", | ||
1571 | .parent = &l4_ck, | ||
1572 | .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, | ||
1573 | .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, | ||
1574 | .enable_bit = 30, | ||
1575 | .recalc = &omap2_followparent_recalc, | ||
1576 | }; | ||
1577 | |||
1578 | static struct clk wdt4_ick = { | ||
1579 | .name = "wdt4_ick", | ||
1580 | .parent = &l4_ck, | ||
1581 | .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, | ||
1582 | .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, | ||
1583 | .enable_bit = 29, | ||
1584 | .recalc = &omap2_followparent_recalc, | ||
1585 | }; | ||
1586 | |||
1587 | static struct clk wdt4_fck = { | ||
1588 | .name = "wdt4_fck", | ||
1589 | .parent = &func_32k_ck, | ||
1590 | .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, | ||
1591 | .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, | ||
1592 | .enable_bit = 29, | ||
1593 | .recalc = &omap2_followparent_recalc, | ||
1594 | }; | ||
1595 | |||
1596 | static struct clk wdt3_ick = { | ||
1597 | .name = "wdt3_ick", | ||
1598 | .parent = &l4_ck, | ||
1599 | .flags = CLOCK_IN_OMAP242X, | ||
1600 | .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, | ||
1601 | .enable_bit = 28, | ||
1602 | .recalc = &omap2_followparent_recalc, | ||
1603 | }; | ||
1604 | |||
1605 | static struct clk wdt3_fck = { | ||
1606 | .name = "wdt3_fck", | ||
1607 | .parent = &func_32k_ck, | ||
1608 | .flags = CLOCK_IN_OMAP242X, | ||
1609 | .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, | ||
1610 | .enable_bit = 28, | ||
1611 | .recalc = &omap2_followparent_recalc, | ||
1612 | }; | ||
1613 | |||
1614 | static struct clk mspro_ick = { | ||
1615 | .name = "mspro_ick", | ||
1616 | .parent = &l4_ck, | ||
1617 | .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, | ||
1618 | .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, | ||
1619 | .enable_bit = 27, | ||
1620 | .recalc = &omap2_followparent_recalc, | ||
1621 | }; | ||
1622 | |||
1623 | static struct clk mspro_fck = { | ||
1624 | .name = "mspro_fck", | ||
1625 | .parent = &func_96m_ck, | ||
1626 | .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, | ||
1627 | .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, | ||
1628 | .enable_bit = 27, | ||
1629 | .recalc = &omap2_followparent_recalc, | ||
1630 | }; | ||
1631 | |||
1632 | static struct clk mmc_ick = { | ||
1633 | .name = "mmc_ick", | ||
1634 | .parent = &l4_ck, | ||
1635 | .flags = CLOCK_IN_OMAP242X, | ||
1636 | .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, | ||
1637 | .enable_bit = 26, | ||
1638 | .recalc = &omap2_followparent_recalc, | ||
1639 | }; | ||
1640 | |||
1641 | static struct clk mmc_fck = { | ||
1642 | .name = "mmc_fck", | ||
1643 | .parent = &func_96m_ck, | ||
1644 | .flags = CLOCK_IN_OMAP242X, | ||
1645 | .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, | ||
1646 | .enable_bit = 26, | ||
1647 | .recalc = &omap2_followparent_recalc, | ||
1648 | }; | ||
1649 | |||
1650 | static struct clk fac_ick = { | ||
1651 | .name = "fac_ick", | ||
1652 | .parent = &l4_ck, | ||
1653 | .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, | ||
1654 | .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, | ||
1655 | .enable_bit = 25, | ||
1656 | .recalc = &omap2_followparent_recalc, | ||
1657 | }; | ||
1658 | |||
1659 | static struct clk fac_fck = { | ||
1660 | .name = "fac_fck", | ||
1661 | .parent = &func_12m_ck, | ||
1662 | .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, | ||
1663 | .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, | ||
1664 | .enable_bit = 25, | ||
1665 | .recalc = &omap2_followparent_recalc, | ||
1666 | }; | ||
1667 | |||
1668 | static struct clk eac_ick = { | ||
1669 | .name = "eac_ick", | ||
1670 | .parent = &l4_ck, | ||
1671 | .flags = CLOCK_IN_OMAP242X, | ||
1672 | .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, | ||
1673 | .enable_bit = 24, | ||
1674 | .recalc = &omap2_followparent_recalc, | ||
1675 | }; | ||
1676 | |||
1677 | static struct clk eac_fck = { | ||
1678 | .name = "eac_fck", | ||
1679 | .parent = &func_96m_ck, | ||
1680 | .flags = CLOCK_IN_OMAP242X, | ||
1681 | .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, | ||
1682 | .enable_bit = 24, | ||
1683 | .recalc = &omap2_followparent_recalc, | ||
1684 | }; | ||
1685 | |||
1686 | static struct clk hdq_ick = { | ||
1687 | .name = "hdq_ick", | ||
1688 | .parent = &l4_ck, | ||
1689 | .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, | ||
1690 | .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, | ||
1691 | .enable_bit = 23, | ||
1692 | .recalc = &omap2_followparent_recalc, | ||
1693 | }; | ||
1694 | |||
1695 | static struct clk hdq_fck = { | ||
1696 | .name = "hdq_fck", | ||
1697 | .parent = &func_12m_ck, | ||
1698 | .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, | ||
1699 | .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, | ||
1700 | .enable_bit = 23, | ||
1701 | .recalc = &omap2_followparent_recalc, | ||
1702 | }; | ||
1703 | |||
1704 | static struct clk i2c2_ick = { | ||
1705 | .name = "i2c2_ick", | ||
1706 | .parent = &l4_ck, | ||
1707 | .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, | ||
1708 | .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, | ||
1709 | .enable_bit = 20, | ||
1710 | .recalc = &omap2_followparent_recalc, | ||
1711 | }; | ||
1712 | |||
1713 | static struct clk i2c2_fck = { | ||
1714 | .name = "i2c2_fck", | ||
1715 | .parent = &func_12m_ck, | ||
1716 | .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, | ||
1717 | .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, | ||
1718 | .enable_bit = 20, | ||
1719 | .recalc = &omap2_followparent_recalc, | ||
1720 | }; | ||
1721 | |||
1722 | static struct clk i2chs2_fck = { | ||
1723 | .name = "i2chs2_fck", | ||
1724 | .parent = &func_96m_ck, | ||
1725 | .flags = CLOCK_IN_OMAP243X, | ||
1726 | .enable_reg = (void __iomem *)&CM_FCLKEN2_CORE, | ||
1727 | .enable_bit = 20, | ||
1728 | .recalc = &omap2_followparent_recalc, | ||
1729 | }; | ||
1730 | |||
1731 | static struct clk i2c1_ick = { | ||
1732 | .name = "i2c1_ick", | ||
1733 | .parent = &l4_ck, | ||
1734 | .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, | ||
1735 | .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, | ||
1736 | .enable_bit = 19, | ||
1737 | .recalc = &omap2_followparent_recalc, | ||
1738 | }; | ||
1739 | |||
1740 | static struct clk i2c1_fck = { | ||
1741 | .name = "i2c1_fck", | ||
1742 | .parent = &func_12m_ck, | ||
1743 | .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, | ||
1744 | .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, | ||
1745 | .enable_bit = 19, | ||
1746 | .recalc = &omap2_followparent_recalc, | ||
1747 | }; | ||
1748 | |||
1749 | static struct clk i2chs1_fck = { | ||
1750 | .name = "i2chs1_fck", | ||
1751 | .parent = &func_96m_ck, | ||
1752 | .flags = CLOCK_IN_OMAP243X, | ||
1753 | .enable_reg = (void __iomem *)&CM_FCLKEN2_CORE, | ||
1754 | .enable_bit = 19, | ||
1755 | .recalc = &omap2_followparent_recalc, | ||
1756 | }; | ||
1757 | |||
1758 | static struct clk vlynq_ick = { | ||
1759 | .name = "vlynq_ick", | ||
1760 | .parent = &core_l3_ck, | ||
1761 | .flags = CLOCK_IN_OMAP242X, | ||
1762 | .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, | ||
1763 | .enable_bit = 3, | ||
1764 | .recalc = &omap2_followparent_recalc, | ||
1765 | }; | ||
1766 | |||
1767 | static struct clk vlynq_fck = { | ||
1768 | .name = "vlynq_fck", | ||
1769 | .parent = &func_96m_ck, | ||
1770 | .flags = CLOCK_IN_OMAP242X | RATE_CKCTL | CM_CORE_SEL1 | DELAYED_APP, | ||
1771 | .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, | ||
1772 | .enable_bit = 3, | ||
1773 | .src_offset = 15, | ||
1774 | .recalc = &omap2_followparent_recalc, | ||
1775 | }; | ||
1776 | |||
1777 | static struct clk sdrc_ick = { | ||
1778 | .name = "sdrc_ick", | ||
1779 | .parent = &l4_ck, | ||
1780 | .flags = CLOCK_IN_OMAP243X, | ||
1781 | .enable_reg = (void __iomem *)&CM_ICLKEN3_CORE, | ||
1782 | .enable_bit = 2, | ||
1783 | .recalc = &omap2_followparent_recalc, | ||
1784 | }; | ||
1785 | |||
1786 | static struct clk des_ick = { | ||
1787 | .name = "des_ick", | ||
1788 | .parent = &l4_ck, | ||
1789 | .flags = CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X, | ||
1790 | .enable_reg = (void __iomem *)&CM_ICLKEN4_CORE, | ||
1791 | .enable_bit = 0, | ||
1792 | .recalc = &omap2_followparent_recalc, | ||
1793 | }; | ||
1794 | |||
1795 | static struct clk sha_ick = { | ||
1796 | .name = "sha_ick", | ||
1797 | .parent = &l4_ck, | ||
1798 | .flags = CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X, | ||
1799 | .enable_reg = (void __iomem *)&CM_ICLKEN4_CORE, | ||
1800 | .enable_bit = 1, | ||
1801 | .recalc = &omap2_followparent_recalc, | ||
1802 | }; | ||
1803 | |||
1804 | static struct clk rng_ick = { | ||
1805 | .name = "rng_ick", | ||
1806 | .parent = &l4_ck, | ||
1807 | .flags = CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X, | ||
1808 | .enable_reg = (void __iomem *)&CM_ICLKEN4_CORE, | ||
1809 | .enable_bit = 2, | ||
1810 | .recalc = &omap2_followparent_recalc, | ||
1811 | }; | ||
1812 | |||
1813 | static struct clk aes_ick = { | ||
1814 | .name = "aes_ick", | ||
1815 | .parent = &l4_ck, | ||
1816 | .flags = CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X, | ||
1817 | .enable_reg = (void __iomem *)&CM_ICLKEN4_CORE, | ||
1818 | .enable_bit = 3, | ||
1819 | .recalc = &omap2_followparent_recalc, | ||
1820 | }; | ||
1821 | |||
1822 | static struct clk pka_ick = { | ||
1823 | .name = "pka_ick", | ||
1824 | .parent = &l4_ck, | ||
1825 | .flags = CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X, | ||
1826 | .enable_reg = (void __iomem *)&CM_ICLKEN4_CORE, | ||
1827 | .enable_bit = 4, | ||
1828 | .recalc = &omap2_followparent_recalc, | ||
1829 | }; | ||
1830 | |||
1831 | static struct clk usb_fck = { | ||
1832 | .name = "usb_fck", | ||
1833 | .parent = &func_48m_ck, | ||
1834 | .flags = CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X, | ||
1835 | .enable_reg = (void __iomem *)&CM_FCLKEN2_CORE, | ||
1836 | .enable_bit = 0, | ||
1837 | .recalc = &omap2_followparent_recalc, | ||
1838 | }; | ||
1839 | |||
1840 | static struct clk usbhs_ick = { | ||
1841 | .name = "usbhs_ick", | ||
1842 | .parent = &l4_ck, | ||
1843 | .flags = CLOCK_IN_OMAP243X, | ||
1844 | .enable_reg = (void __iomem *)&CM_ICLKEN2_CORE, | ||
1845 | .enable_bit = 6, | ||
1846 | .recalc = &omap2_followparent_recalc, | ||
1847 | }; | ||
1848 | |||
1849 | static struct clk mmchs1_ick = { | ||
1850 | .name = "mmchs1_ick", | ||
1851 | .parent = &l4_ck, | ||
1852 | .flags = CLOCK_IN_OMAP243X, | ||
1853 | .enable_reg = (void __iomem *)&CM_ICLKEN2_CORE, | ||
1854 | .enable_bit = 7, | ||
1855 | .recalc = &omap2_followparent_recalc, | ||
1856 | }; | ||
1857 | |||
1858 | static struct clk mmchs1_fck = { | ||
1859 | .name = "mmchs1_fck", | ||
1860 | .parent = &func_96m_ck, | ||
1861 | .flags = CLOCK_IN_OMAP243X, | ||
1862 | .enable_reg = (void __iomem *)&CM_FCLKEN2_CORE, | ||
1863 | .enable_bit = 7, | ||
1864 | .recalc = &omap2_followparent_recalc, | ||
1865 | }; | ||
1866 | |||
1867 | static struct clk mmchs2_ick = { | ||
1868 | .name = "mmchs2_ick", | ||
1869 | .parent = &l4_ck, | ||
1870 | .flags = CLOCK_IN_OMAP243X, | ||
1871 | .enable_reg = (void __iomem *)&CM_ICLKEN2_CORE, | ||
1872 | .enable_bit = 8, | ||
1873 | .recalc = &omap2_followparent_recalc, | ||
1874 | }; | ||
1875 | |||
1876 | static struct clk mmchs2_fck = { | ||
1877 | .name = "mmchs2_fck", | ||
1878 | .parent = &func_96m_ck, | ||
1879 | .flags = CLOCK_IN_OMAP243X, | ||
1880 | .enable_reg = (void __iomem *)&CM_FCLKEN2_CORE, | ||
1881 | .enable_bit = 8, | ||
1882 | .recalc = &omap2_followparent_recalc, | ||
1883 | }; | ||
1884 | |||
1885 | static struct clk gpio5_ick = { | ||
1886 | .name = "gpio5_ick", | ||
1887 | .parent = &l4_ck, | ||
1888 | .flags = CLOCK_IN_OMAP243X, | ||
1889 | .enable_reg = (void __iomem *)&CM_ICLKEN2_CORE, | ||
1890 | .enable_bit = 10, | ||
1891 | .recalc = &omap2_followparent_recalc, | ||
1892 | }; | ||
1893 | |||
1894 | static struct clk gpio5_fck = { | ||
1895 | .name = "gpio5_fck", | ||
1896 | .parent = &func_32k_ck, | ||
1897 | .flags = CLOCK_IN_OMAP243X, | ||
1898 | .enable_reg = (void __iomem *)&CM_FCLKEN2_CORE, | ||
1899 | .enable_bit = 10, | ||
1900 | .recalc = &omap2_followparent_recalc, | ||
1901 | }; | ||
1902 | |||
1903 | static struct clk mdm_intc_ick = { | ||
1904 | .name = "mdm_intc_ick", | ||
1905 | .parent = &l4_ck, | ||
1906 | .flags = CLOCK_IN_OMAP243X, | ||
1907 | .enable_reg = (void __iomem *)&CM_ICLKEN2_CORE, | ||
1908 | .enable_bit = 11, | ||
1909 | .recalc = &omap2_followparent_recalc, | ||
1910 | }; | ||
1911 | |||
1912 | static struct clk mmchsdb1_fck = { | ||
1913 | .name = "mmchsdb1_fck", | ||
1914 | .parent = &func_32k_ck, | ||
1915 | .flags = CLOCK_IN_OMAP243X, | ||
1916 | .enable_reg = (void __iomem *)&CM_FCLKEN2_CORE, | ||
1917 | .enable_bit = 16, | ||
1918 | .recalc = &omap2_followparent_recalc, | ||
1919 | }; | ||
1920 | |||
1921 | static struct clk mmchsdb2_fck = { | ||
1922 | .name = "mmchsdb2_fck", | ||
1923 | .parent = &func_32k_ck, | ||
1924 | .flags = CLOCK_IN_OMAP243X, | ||
1925 | .enable_reg = (void __iomem *)&CM_FCLKEN2_CORE, | ||
1926 | .enable_bit = 17, | ||
1927 | .recalc = &omap2_followparent_recalc, | ||
1928 | }; | ||
1929 | |||
1930 | /* | ||
1931 | * This clock is a composite clock which does entire set changes then | ||
1932 | * forces a rebalance. It keys on the MPU speed, but it really could | ||
1933 | * be any key speed part of a set in the rate table. | ||
1934 | * | ||
1935 | * to really change a set, you need memory table sets which get changed | ||
1936 | * in sram, pre-notifiers & post notifiers, changing the top set, without | ||
1937 | * having low level display recalc's won't work... this is why dpm notifiers | ||
1938 | * work, isr's off, walk a list of clocks already _off_ and not messing with | ||
1939 | * the bus. | ||
1940 | * | ||
1941 | * This clock should have no parent. It embodies the entire upper level | ||
1942 | * active set. A parent will mess up some of the init also. | ||
1943 | */ | ||
1944 | static struct clk virt_prcm_set = { | ||
1945 | .name = "virt_prcm_set", | ||
1946 | .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | | ||
1947 | VIRTUAL_CLOCK | ALWAYS_ENABLED | DELAYED_APP, | ||
1948 | .parent = &mpu_ck, /* Indexed by mpu speed, no parent */ | ||
1949 | .recalc = &omap2_mpu_recalc, /* sets are keyed on mpu rate */ | ||
1950 | .set_rate = &omap2_select_table_rate, | ||
1951 | .round_rate = &omap2_round_to_table_rate, | ||
1952 | }; | ||
1953 | |||
1954 | static struct clk *onchip_clks[] = { | ||
1955 | /* external root sources */ | ||
1956 | &func_32k_ck, | ||
1957 | &osc_ck, | ||
1958 | &sys_ck, | ||
1959 | &alt_ck, | ||
1960 | /* internal analog sources */ | ||
1961 | &dpll_ck, | ||
1962 | &apll96_ck, | ||
1963 | &apll54_ck, | ||
1964 | /* internal prcm root sources */ | ||
1965 | &func_54m_ck, | ||
1966 | &core_ck, | ||
1967 | &sleep_ck, | ||
1968 | &func_96m_ck, | ||
1969 | &func_48m_ck, | ||
1970 | &func_12m_ck, | ||
1971 | &wdt1_osc_ck, | ||
1972 | &sys_clkout, | ||
1973 | &sys_clkout2, | ||
1974 | /* mpu domain clocks */ | ||
1975 | &mpu_ck, | ||
1976 | /* dsp domain clocks */ | ||
1977 | &iva2_1_fck, /* 2430 */ | ||
1978 | &iva2_1_ick, | ||
1979 | &dsp_ick, /* 2420 */ | ||
1980 | &dsp_fck, | ||
1981 | &iva1_ifck, | ||
1982 | &iva1_mpu_int_ifck, | ||
1983 | /* GFX domain clocks */ | ||
1984 | &gfx_3d_fck, | ||
1985 | &gfx_2d_fck, | ||
1986 | &gfx_ick, | ||
1987 | /* Modem domain clocks */ | ||
1988 | &mdm_ick, | ||
1989 | &mdm_osc_ck, | ||
1990 | /* DSS domain clocks */ | ||
1991 | &dss_ick, | ||
1992 | &dss1_fck, | ||
1993 | &dss2_fck, | ||
1994 | &dss_54m_fck, | ||
1995 | /* L3 domain clocks */ | ||
1996 | &core_l3_ck, | ||
1997 | &ssi_ssr_sst_fck, | ||
1998 | &usb_l4_ick, | ||
1999 | /* L4 domain clocks */ | ||
2000 | &l4_ck, /* used as both core_l4 and wu_l4 */ | ||
2001 | &ssi_l4_ick, | ||
2002 | /* virtual meta-group clock */ | ||
2003 | &virt_prcm_set, | ||
2004 | /* general l4 interface ck, multi-parent functional clk */ | ||
2005 | &gpt1_ick, | ||
2006 | &gpt1_fck, | ||
2007 | &gpt2_ick, | ||
2008 | &gpt2_fck, | ||
2009 | &gpt3_ick, | ||
2010 | &gpt3_fck, | ||
2011 | &gpt4_ick, | ||
2012 | &gpt4_fck, | ||
2013 | &gpt5_ick, | ||
2014 | &gpt5_fck, | ||
2015 | &gpt6_ick, | ||
2016 | &gpt6_fck, | ||
2017 | &gpt7_ick, | ||
2018 | &gpt7_fck, | ||
2019 | &gpt8_ick, | ||
2020 | &gpt8_fck, | ||
2021 | &gpt9_ick, | ||
2022 | &gpt9_fck, | ||
2023 | &gpt10_ick, | ||
2024 | &gpt10_fck, | ||
2025 | &gpt11_ick, | ||
2026 | &gpt11_fck, | ||
2027 | &gpt12_ick, | ||
2028 | &gpt12_fck, | ||
2029 | &mcbsp1_ick, | ||
2030 | &mcbsp1_fck, | ||
2031 | &mcbsp2_ick, | ||
2032 | &mcbsp2_fck, | ||
2033 | &mcbsp3_ick, | ||
2034 | &mcbsp3_fck, | ||
2035 | &mcbsp4_ick, | ||
2036 | &mcbsp4_fck, | ||
2037 | &mcbsp5_ick, | ||
2038 | &mcbsp5_fck, | ||
2039 | &mcspi1_ick, | ||
2040 | &mcspi1_fck, | ||
2041 | &mcspi2_ick, | ||
2042 | &mcspi2_fck, | ||
2043 | &mcspi3_ick, | ||
2044 | &mcspi3_fck, | ||
2045 | &uart1_ick, | ||
2046 | &uart1_fck, | ||
2047 | &uart2_ick, | ||
2048 | &uart2_fck, | ||
2049 | &uart3_ick, | ||
2050 | &uart3_fck, | ||
2051 | &gpios_ick, | ||
2052 | &gpios_fck, | ||
2053 | &mpu_wdt_ick, | ||
2054 | &mpu_wdt_fck, | ||
2055 | &sync_32k_ick, | ||
2056 | &wdt1_ick, | ||
2057 | &omapctrl_ick, | ||
2058 | &icr_ick, | ||
2059 | &cam_fck, | ||
2060 | &cam_ick, | ||
2061 | &mailboxes_ick, | ||
2062 | &wdt4_ick, | ||
2063 | &wdt4_fck, | ||
2064 | &wdt3_ick, | ||
2065 | &wdt3_fck, | ||
2066 | &mspro_ick, | ||
2067 | &mspro_fck, | ||
2068 | &mmc_ick, | ||
2069 | &mmc_fck, | ||
2070 | &fac_ick, | ||
2071 | &fac_fck, | ||
2072 | &eac_ick, | ||
2073 | &eac_fck, | ||
2074 | &hdq_ick, | ||
2075 | &hdq_fck, | ||
2076 | &i2c1_ick, | ||
2077 | &i2c1_fck, | ||
2078 | &i2chs1_fck, | ||
2079 | &i2c2_ick, | ||
2080 | &i2c2_fck, | ||
2081 | &i2chs2_fck, | ||
2082 | &vlynq_ick, | ||
2083 | &vlynq_fck, | ||
2084 | &sdrc_ick, | ||
2085 | &des_ick, | ||
2086 | &sha_ick, | ||
2087 | &rng_ick, | ||
2088 | &aes_ick, | ||
2089 | &pka_ick, | ||
2090 | &usb_fck, | ||
2091 | &usbhs_ick, | ||
2092 | &mmchs1_ick, | ||
2093 | &mmchs1_fck, | ||
2094 | &mmchs2_ick, | ||
2095 | &mmchs2_fck, | ||
2096 | &gpio5_ick, | ||
2097 | &gpio5_fck, | ||
2098 | &mdm_intc_ick, | ||
2099 | &mmchsdb1_fck, | ||
2100 | &mmchsdb2_fck, | ||
2101 | }; | ||
2102 | |||
2103 | #endif | ||