1 files changed, 31 insertions, 16 deletions

diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index 9917d2fddc2f..52dfd51a938e 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -38,14 +38,14 @@
 #include <asm/mach/flash.h>
 #include <asm/mach/map.h>
 
-#include <mach/board.h>
-#include <mach/common.h>
+#include <plat/board.h>
+#include <plat/common.h>
 #include <mach/gpio.h>
-#include <mach/gpmc.h>
+#include <plat/gpmc.h>
 #include <mach/hardware.h>
-#include <mach/nand.h>
-#include <mach/mux.h>
-#include <mach/usb.h>
+#include <plat/nand.h>
+#include <plat/mux.h>
+#include <plat/usb.h>
 
 #include "sdram-micron-mt46h32m32lf-6.h"
 #include "mmc-twl4030.h"
@@ -67,7 +67,7 @@
 #if defined(CONFIG_TOUCHSCREEN_ADS7846) || \
         defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
 
-#include <mach/mcspi.h>
+#include <plat/mcspi.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
 
@@ -329,6 +329,15 @@ static struct regulator_init_data overo_vmmc1 = {
         .consumer_supplies      = &overo_vmmc1_supply,
 };
 
+static struct twl4030_codec_audio_data overo_audio_data = {
+        .audio_mclk = 26000000,
+};
+
+static struct twl4030_codec_data overo_codec_data = {
+        .audio_mclk = 26000000,
+        .audio = &overo_audio_data,
+};
+
 /* mmc2 (WLAN) and Bluetooth don't use twl4030 regulators */
 
 static struct twl4030_platform_data overo_twldata = {
@@ -336,6 +345,7 @@ static struct twl4030_platform_data overo_twldata = {
         .irq_end        = TWL4030_IRQ_END,
         .gpio           = &overo_gpio_data,
         .usb            = &overo_usb_data,
+        .codec          = &overo_codec_data,
         .vmmc1          = &overo_vmmc1,
 };
 
@@ -384,6 +394,18 @@ static struct platform_device *overo_devices[] __initdata = {
         &overo_lcd_device,
 };
 
+static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
+        .port_mode[0] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+        .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
+        .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+
+        .phy_reset  = true,
+        .reset_gpio_port[0]  = -EINVAL,
+        .reset_gpio_port[1]  = OVERO_GPIO_USBH_NRESET,
+        .reset_gpio_port[2]  = -EINVAL
+};
+
+
 static void __init overo_init(void)
 {
         overo_i2c_init();
@@ -391,6 +413,7 @@ static void __init overo_init(void)
         omap_serial_init();
         overo_flash_init();
         usb_musb_init();
+        usb_ehci_init(&ehci_pdata);
         overo_ads7846_init();
         overo_init_smsc911x();
 
@@ -433,14 +456,6 @@ static void __init overo_init(void)
         else
                 printk(KERN_ERR "could not obtain gpio for "
                                         "OVERO_GPIO_USBH_CPEN\n");
-
-        if ((gpio_request(OVERO_GPIO_USBH_NRESET,
-                          "OVERO_GPIO_USBH_NRESET") == 0) &&
-            (gpio_direction_output(OVERO_GPIO_USBH_NRESET, 1) == 0))
-                gpio_export(OVERO_GPIO_USBH_NRESET, 0);
-        else
-                printk(KERN_ERR "could not obtain gpio for "
-                                        "OVERO_GPIO_USBH_NRESET\n");
 }
 
 static void __init overo_map_io(void)
@@ -451,7 +466,7 @@ static void __init overo_map_io(void)
 
 MACHINE_START(OVERO, "Gumstix Overo")
         .phys_io        = 0x48000000,
-        .io_pg_offst    = ((0xd8000000) >> 18) & 0xfffc,
+        .io_pg_offst    = ((0xfa000000) >> 18) & 0xfffc,
         .boot_params    = 0x80000100,
         .map_io         = overo_map_io,
         .init_irq       = overo_init_irq,