1 files changed, 241 insertions, 0 deletions

diff --git a/arch/arm/mach-omap2/board-omap3logic.c b/arch/arm/mach-omap2/board-omap3logic.c
new file mode 100644
index 000000000000..5f7d2c1e7ef5
--- /dev/null
+++ b/arch/arm/mach-omap2/board-omap3logic.c
@@ -0,0 +1,241 @@
+/*
+ * linux/arch/arm/mach-omap2/board-omap3logic.c
+ *
+ * Copyright (C) 2010 Li-Pro.Net
+ * Stephan Linz <linz@li-pro.net>
+ *
+ * Copyright (C) 2010 Logic Product Development, Inc.
+ * Peter Barada <peter.barada@logicpd.com>
+ *
+ * Modified from Beagle, EVM, and RX51
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+
+#include <linux/regulator/machine.h>
+
+#include <linux/i2c/twl.h>
+#include <linux/mmc/host.h>
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include "mux.h"
+#include "hsmmc.h"
+#include "timer-gp.h"
+#include "control.h"
+
+#include <plat/mux.h>
+#include <plat/board.h>
+#include <plat/common.h>
+#include <plat/gpmc-smsc911x.h>
+#include <plat/gpmc.h>
+#include <plat/sdrc.h>
+
+#define OMAP3LOGIC_SMSC911X_CS                  1
+
+#define OMAP3530_LV_SOM_MMC_GPIO_CD             110
+#define OMAP3530_LV_SOM_MMC_GPIO_WP             126
+#define OMAP3530_LV_SOM_SMSC911X_GPIO_IRQ       152
+
+#define OMAP3_TORPEDO_MMC_GPIO_CD               127
+#define OMAP3_TORPEDO_SMSC911X_GPIO_IRQ         129
+
+static struct regulator_consumer_supply omap3logic_vmmc1_supply = {
+        .supply                 = "vmmc",
+};
+
+/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
+static struct regulator_init_data omap3logic_vmmc1 = {
+        .constraints = {
+                .name                   = "VMMC1",
+                .min_uV                 = 1850000,
+                .max_uV                 = 3150000,
+                .valid_modes_mask       = REGULATOR_MODE_NORMAL
+                                        | REGULATOR_MODE_STANDBY,
+                .valid_ops_mask         = REGULATOR_CHANGE_VOLTAGE
+                                        | REGULATOR_CHANGE_MODE
+                                        | REGULATOR_CHANGE_STATUS,
+        },
+        .num_consumer_supplies  = 1,
+        .consumer_supplies      = &omap3logic_vmmc1_supply,
+};
+
+static struct twl4030_gpio_platform_data omap3logic_gpio_data = {
+        .gpio_base      = OMAP_MAX_GPIO_LINES,
+        .irq_base       = TWL4030_GPIO_IRQ_BASE,
+        .irq_end        = TWL4030_GPIO_IRQ_END,
+        .use_leds       = true,
+        .pullups        = BIT(1),
+        .pulldowns      = BIT(2)  | BIT(6)  | BIT(7)  | BIT(8)
+                        | BIT(13) | BIT(15) | BIT(16) | BIT(17),
+};
+
+static struct twl4030_platform_data omap3logic_twldata = {
+        .irq_base       = TWL4030_IRQ_BASE,
+        .irq_end        = TWL4030_IRQ_END,
+
+        /* platform_data for children goes here */
+        .gpio           = &omap3logic_gpio_data,
+        .vmmc1          = &omap3logic_vmmc1,
+};
+
+static struct i2c_board_info __initdata omap3logic_i2c_boardinfo[] = {
+        {
+                I2C_BOARD_INFO("twl4030", 0x48),
+                .flags = I2C_CLIENT_WAKE,
+                .irq = INT_34XX_SYS_NIRQ,
+                .platform_data = &omap3logic_twldata,
+        },
+};
+
+static int __init omap3logic_i2c_init(void)
+{
+        omap_register_i2c_bus(1, 2600, omap3logic_i2c_boardinfo,
+                                ARRAY_SIZE(omap3logic_i2c_boardinfo));
+        return 0;
+}
+
+static struct omap2_hsmmc_info __initdata board_mmc_info[] = {
+        {
+                .name           = "external",
+                .mmc            = 1,
+                .caps           = MMC_CAP_4_BIT_DATA,
+                .gpio_cd        = -EINVAL,
+                .gpio_wp        = -EINVAL,
+        },
+        {}      /* Terminator */
+};
+
+static void __init board_mmc_init(void)
+{
+        if (machine_is_omap3530_lv_som()) {
+                /* OMAP3530 LV SOM board */
+                board_mmc_info[0].gpio_cd = OMAP3530_LV_SOM_MMC_GPIO_CD;
+                board_mmc_info[0].gpio_wp = OMAP3530_LV_SOM_MMC_GPIO_WP;
+                omap_mux_init_signal("gpio_110", OMAP_PIN_OUTPUT);
+                omap_mux_init_signal("gpio_126", OMAP_PIN_OUTPUT);
+        } else if (machine_is_omap3_torpedo()) {
+                /* OMAP3 Torpedo board */
+                board_mmc_info[0].gpio_cd = OMAP3_TORPEDO_MMC_GPIO_CD;
+                omap_mux_init_signal("gpio_127", OMAP_PIN_OUTPUT);
+        } else {
+                /* unsupported board */
+                printk(KERN_ERR "%s(): unknown machine type\n", __func__);
+                return;
+        }
+
+        omap2_hsmmc_init(board_mmc_info);
+        /* link regulators to MMC adapters */
+        omap3logic_vmmc1_supply.dev = board_mmc_info[0].dev;
+}
+
+static struct omap_smsc911x_platform_data __initdata board_smsc911x_data = {
+        .cs             = OMAP3LOGIC_SMSC911X_CS,
+        .gpio_irq       = -EINVAL,
+        .gpio_reset     = -EINVAL,
+        .flags          = IORESOURCE_IRQ_LOWLEVEL,
+};
+
+/* TODO/FIXME (comment by Peter Barada, LogicPD):
+ * Fix the PBIAS voltage for Torpedo MMC1 pins that
+ * are used for other needs (IRQs, etc).            */
+static void omap3torpedo_fix_pbias_voltage(void)
+{
+        u16 control_pbias_offset = OMAP343X_CONTROL_PBIAS_LITE;
+        u32 reg;
+
+        if (machine_is_omap3_torpedo())
+        {
+                /* Set the bias for the pin */
+                reg = omap_ctrl_readl(control_pbias_offset);
+
+                reg &= ~OMAP343X_PBIASLITEPWRDNZ1;
+                omap_ctrl_writel(reg, control_pbias_offset);
+
+                /* 100ms delay required for PBIAS configuration */
+                msleep(100);
+
+                reg |= OMAP343X_PBIASLITEVMODE1;
+                reg |= OMAP343X_PBIASLITEPWRDNZ1;
+                omap_ctrl_writel(reg | 0x300, control_pbias_offset);
+        }
+}
+
+static inline void __init board_smsc911x_init(void)
+{
+        if (machine_is_omap3530_lv_som()) {
+                /* OMAP3530 LV SOM board */
+                board_smsc911x_data.gpio_irq =
+                                        OMAP3530_LV_SOM_SMSC911X_GPIO_IRQ;
+                omap_mux_init_signal("gpio_152", OMAP_PIN_INPUT);
+        } else if (machine_is_omap3_torpedo()) {
+                /* OMAP3 Torpedo board */
+                board_smsc911x_data.gpio_irq = OMAP3_TORPEDO_SMSC911X_GPIO_IRQ;
+                omap_mux_init_signal("gpio_129", OMAP_PIN_INPUT);
+        } else {
+                /* unsupported board */
+                printk(KERN_ERR "%s(): unknown machine type\n", __func__);
+                return;
+        }
+
+        gpmc_smsc911x_init(&board_smsc911x_data);
+}
+
+static void __init omap3logic_init_irq(void)
+{
+        omap2_init_common_hw(NULL, NULL);
+        omap_init_irq();
+        omap_gpio_init();
+}
+
+#ifdef CONFIG_OMAP_MUX
+static struct omap_board_mux board_mux[] __initdata = {
+        { .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define board_mux       NULL
+#endif
+
+static void __init omap3logic_init(void)
+{
+        omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
+        omap3torpedo_fix_pbias_voltage();
+        omap3logic_i2c_init();
+        omap_serial_init();
+        board_mmc_init();
+        board_smsc911x_init();
+
+        /* Ensure SDRC pins are mux'd for self-refresh */
+        omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
+        omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
+}
+
+MACHINE_START(OMAP3_TORPEDO, "Logic OMAP3 Torpedo board")
+        .boot_params    = 0x80000100,
+        .map_io         = omap3_map_io,
+        .init_irq       = omap3logic_init_irq,
+        .init_machine   = omap3logic_init,
+        .timer          = &omap_timer,
+MACHINE_END
+
+MACHINE_START(OMAP3530_LV_SOM, "OMAP Logic 3530 LV SOM board")
+        .boot_params    = 0x80000100,
+        .map_io         = omap3_map_io,
+        .init_irq       = omap3logic_init_irq,
+        .init_machine   = omap3logic_init,
+        .timer          = &omap_timer,
+MACHINE_END