1 files changed, 172 insertions, 2 deletions

diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c
index a300d634d8a5..4933fce766c8 100644
--- a/arch/arm/mach-omap2/board-h4.c
+++ b/arch/arm/mach-omap2/board-h4.c
@@ -17,6 +17,8 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/delay.h>
+#include <linux/workqueue.h>
+#include <linux/input.h>
 
 #include <asm/hardware.h>
 #include <asm/mach-types.h>
@@ -25,15 +27,57 @@
 #include <asm/mach/flash.h>
 
 #include <asm/arch/gpio.h>
+#include <asm/arch/gpioexpander.h>
 #include <asm/arch/mux.h>
 #include <asm/arch/usb.h>
+#include <asm/arch/irda.h>
 #include <asm/arch/board.h>
 #include <asm/arch/common.h>
-#include <asm/arch/prcm.h>
+#include <asm/arch/keypad.h>
+#include <asm/arch/menelaus.h>
+#include <asm/arch/dma.h>
+#include "prcm-regs.h"
 
 #include <asm/io.h>
 #include <asm/delay.h>
 
+static unsigned int row_gpios[6] = { 88, 89, 124, 11, 6, 96 };
+static unsigned int col_gpios[7] = { 90, 91, 100, 36, 12, 97, 98 };
+
+static int h4_keymap[] = {
+        KEY(0, 0, KEY_LEFT),
+        KEY(0, 1, KEY_RIGHT),
+        KEY(0, 2, KEY_A),
+        KEY(0, 3, KEY_B),
+        KEY(0, 4, KEY_C),
+        KEY(1, 0, KEY_DOWN),
+        KEY(1, 1, KEY_UP),
+        KEY(1, 2, KEY_E),
+        KEY(1, 3, KEY_F),
+        KEY(1, 4, KEY_G),
+        KEY(2, 0, KEY_ENTER),
+        KEY(2, 1, KEY_I),
+        KEY(2, 2, KEY_J),
+        KEY(2, 3, KEY_K),
+        KEY(2, 4, KEY_3),
+        KEY(3, 0, KEY_M),
+        KEY(3, 1, KEY_N),
+        KEY(3, 2, KEY_O),
+        KEY(3, 3, KEY_P),
+        KEY(3, 4, KEY_Q),
+        KEY(4, 0, KEY_R),
+        KEY(4, 1, KEY_4),
+        KEY(4, 2, KEY_T),
+        KEY(4, 3, KEY_U),
+        KEY(4, 4, KEY_ENTER),
+        KEY(5, 0, KEY_V),
+        KEY(5, 1, KEY_W),
+        KEY(5, 2, KEY_L),
+        KEY(5, 3, KEY_S),
+        KEY(5, 4, KEY_ENTER),
+        0
+};
+
 static struct mtd_partition h4_partitions[] = {
         /* bootloader (U-Boot, etc) in first sector */
         {
@@ -108,9 +152,123 @@ static struct platform_device h4_smc91x_device = {
         .resource       = h4_smc91x_resources,
 };
 
+/* Select between the IrDA and aGPS module
+ */
+static int h4_select_irda(struct device *dev, int state)
+{
+        unsigned char expa;
+        int err = 0;
+
+        if ((err = read_gpio_expa(&expa, 0x21))) {
+                printk(KERN_ERR "Error reading from I/O expander\n");
+                return err;
+        }
+
+        /* 'P6' enable/disable IRDA_TX and IRDA_RX */
+        if (state & IR_SEL) {   /* IrDa */
+                if ((err = write_gpio_expa(expa | 0x01, 0x21))) {
+                        printk(KERN_ERR "Error writing to I/O expander\n");
+                        return err;
+                }
+        } else {
+                if ((err = write_gpio_expa(expa & ~0x01, 0x21))) {
+                        printk(KERN_ERR "Error writing to I/O expander\n");
+                        return err;
+                }
+        }
+        return err;
+}
+
+static void set_trans_mode(void *data)
+{
+        int *mode = data;
+        unsigned char expa;
+        int err = 0;
+
+        if ((err = read_gpio_expa(&expa, 0x20)) != 0) {
+                printk(KERN_ERR "Error reading from I/O expander\n");
+        }
+
+        expa &= ~0x01;
+
+        if (!(*mode & IR_SIRMODE)) { /* MIR/FIR */
+                expa |= 0x01;
+        }
+
+        if ((err = write_gpio_expa(expa, 0x20)) != 0) {
+                printk(KERN_ERR "Error writing to I/O expander\n");
+        }
+}
+
+static int h4_transceiver_mode(struct device *dev, int mode)
+{
+        struct omap_irda_config *irda_config = dev->platform_data;
+
+        cancel_delayed_work(&irda_config->gpio_expa);
+        PREPARE_WORK(&irda_config->gpio_expa, set_trans_mode, &mode);
+        schedule_work(&irda_config->gpio_expa);
+
+        return 0;
+}
+
+static struct omap_irda_config h4_irda_data = {
+        .transceiver_cap        = IR_SIRMODE | IR_MIRMODE | IR_FIRMODE,
+        .transceiver_mode       = h4_transceiver_mode,
+        .select_irda            = h4_select_irda,
+        .rx_channel             = OMAP24XX_DMA_UART3_RX,
+        .tx_channel             = OMAP24XX_DMA_UART3_TX,
+        .dest_start             = OMAP_UART3_BASE,
+        .src_start              = OMAP_UART3_BASE,
+        .tx_trigger             = OMAP24XX_DMA_UART3_TX,
+        .rx_trigger             = OMAP24XX_DMA_UART3_RX,
+};
+
+static struct resource h4_irda_resources[] = {
+        [0] = {
+                .start  = INT_24XX_UART3_IRQ,
+                .end    = INT_24XX_UART3_IRQ,
+                .flags  = IORESOURCE_IRQ,
+        },
+};
+
+static struct platform_device h4_irda_device = {
+        .name           = "omapirda",
+        .id             = -1,
+        .dev            = {
+                .platform_data  = &h4_irda_data,
+        },
+        .num_resources  = 1,
+        .resource       = h4_irda_resources,
+};
+
+static struct omap_kp_platform_data h4_kp_data = {
+        .rows           = 6,
+        .cols           = 7,
+        .keymap         = h4_keymap,
+        .rep            = 1,
+        .row_gpios      = row_gpios,
+        .col_gpios      = col_gpios,
+};
+
+static struct platform_device h4_kp_device = {
+        .name           = "omap-keypad",
+        .id             = -1,
+        .dev            = {
+                .platform_data = &h4_kp_data,
+        },
+};
+
+static struct platform_device h4_lcd_device = {
+        .name           = "lcd_h4",
+        .id             = -1,
+};
+
 static struct platform_device *h4_devices[] __initdata = {
         &h4_smc91x_device,
         &h4_flash_device,
+        &h4_irda_device,
+        &h4_kp_device,
+        &h4_lcd_device,
 };
 
 static inline void __init h4_init_smc91x(void)
@@ -157,7 +315,6 @@ static struct omap_mmc_config h4_mmc_config __initdata = {
 };
 
 static struct omap_lcd_config h4_lcd_config __initdata = {
-        .panel_name     = "h4",
         .ctrl_name      = "internal",
 };
 
@@ -174,6 +331,19 @@ static void __init omap_h4_init(void)
          * You have to mux them off in device drivers later on
          * if not needed.
          */
+#if defined(CONFIG_OMAP_IR) || defined(CONFIG_OMAP_IR_MODULE)
+        omap_cfg_reg(K15_24XX_UART3_TX);
+        omap_cfg_reg(K14_24XX_UART3_RX);
+#endif
+
+#if defined(CONFIG_KEYBOARD_OMAP) || defined(CONFIG_KEYBOARD_OMAP_MODULE)
+        if (omap_has_menelaus()) {
+                row_gpios[5] = 0;
+                col_gpios[2] = 15;
+                col_gpios[6] = 18;
+        }
+#endif
+
         platform_add_devices(h4_devices, ARRAY_SIZE(h4_devices));
         omap_board_config = h4_config;
         omap_board_config_size = ARRAY_SIZE(h4_config);