1 files changed, 38 insertions, 2 deletions

diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c
index 5e9b14675b1e..a0267a9ab466 100644
--- a/arch/arm/mach-omap2/board-h4.c
+++ b/arch/arm/mach-omap2/board-h4.c
@@ -47,6 +47,8 @@
 #define H4_FLASH_CS     0
 #define H4_SMC91X_CS    1
 
+#define H4_ETHR_GPIO_IRQ                92
+
 static unsigned int row_gpios[6] = { 88, 89, 124, 11, 6, 96 };
 static unsigned int col_gpios[7] = { 90, 91, 100, 36, 12, 97, 98 };
 
@@ -341,7 +343,7 @@ static inline void __init h4_init_debug(void)
         udelay(100);
 
         omap_cfg_reg(M15_24XX_GPIO92);
-        if (debug_card_init(cs_mem_base, OMAP24XX_ETHR_GPIO_IRQ) < 0)
+        if (debug_card_init(cs_mem_base, H4_ETHR_GPIO_IRQ) < 0)
                 gpmc_cs_free(eth_cs);
 
 out:
@@ -363,7 +365,7 @@ static void __init h4_init_flash(void)
 
 static void __init omap_h4_init_irq(void)
 {
-        omap2_init_common_hw();
+        omap2_init_common_hw(NULL);
         omap_init_irq();
         omap_gpio_init();
         h4_init_flash();
@@ -377,6 +379,39 @@ static struct omap_lcd_config h4_lcd_config __initdata = {
         .ctrl_name      = "internal",
 };
 
+static struct omap_usb_config h4_usb_config __initdata = {
+#ifdef  CONFIG_MACH_OMAP2_H4_USB1
+        /* NOTE:  usb1 could also be used with 3 wire signaling */
+        .pins[1]        = 4,
+#endif
+
+#ifdef  CONFIG_MACH_OMAP_H4_OTG
+        /* S1.10 ON -- USB OTG port
+         * usb0 switched to Mini-AB port and isp1301 transceiver;
+         * S2.POS3 = OFF, S2.POS4 = ON ... to allow battery charging
+         */
+        .otg            = 1,
+        .pins[0]        = 4,
+#ifdef  CONFIG_USB_GADGET_OMAP
+        /* use OTG cable, or standard A-to-MiniB */
+        .hmc_mode       = 0x14, /* 0:dev/otg 1:host 2:disable */
+#elif   defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+        /* use OTG cable, or NONSTANDARD (B-to-MiniB) */
+        .hmc_mode       = 0x11, /* 0:host 1:host 2:disable */
+#endif  /* XX */
+
+#else
+        /* S1.10 OFF -- usb "download port"
+         * usb0 switched to Mini-B port and isp1105 transceiver;
+         * S2.POS3 = ON, S2.POS4 = OFF ... to enable battery charging
+         */
+        .register_dev   = 1,
+        .pins[0]        = 3,
+/*      .hmc_mode       = 0x14,*/       /* 0:dev 1:host 2:disable */
+        .hmc_mode       = 0x00,         /* 0:dev|otg 1:disable 2:disable */
+#endif
+};
+
 static struct omap_board_config_kernel h4_config[] = {
         { OMAP_TAG_UART,        &h4_uart_config },
         { OMAP_TAG_LCD,         &h4_lcd_config },
@@ -428,6 +463,7 @@ static void __init omap_h4_init(void)
         platform_add_devices(h4_devices, ARRAY_SIZE(h4_devices));
         omap_board_config = h4_config;
         omap_board_config_size = ARRAY_SIZE(h4_config);
+        omap_usb_init(&h4_usb_config);
         omap_serial_init();
 }