1 files changed, 9 insertions, 30 deletions

diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
index 5bfc13b3176c..47e3af2166d4 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -50,7 +50,6 @@
 #include <linux/input/matrix_keypad.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
-#include <linux/usb/otg.h>
 #include <linux/dm9000.h>
 #include <linux/interrupt.h>
 
@@ -269,20 +268,6 @@ static int devkit8000_twl_gpio_setup(struct device *dev,
         devkit8000_vmmc1_supply.dev = mmc[0].dev;
         devkit8000_vsim_supply.dev = mmc[0].dev;
 
-        /* REVISIT: need ehci-omap hooks for external VBUS
-         * power switch and overcurrent detect
-         */
-
-        gpio_request(gpio + 1, "EHCI_nOC");
-        gpio_direction_input(gpio + 1);
-
-        /* TWL4030_GPIO_MAX + 0 == ledA, EHCI nEN_USB_PWR (out, active low) */
-        gpio_request(gpio + TWL4030_GPIO_MAX, "nEN_USB_PWR");
-        gpio_direction_output(gpio + TWL4030_GPIO_MAX, 1);
-
-        /* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */
-        gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
-
         return 0;
 }
 
@@ -303,7 +288,7 @@ static struct regulator_consumer_supply devkit8000_vpll2_supplies[] = {
         .dev            = &devkit8000_lcd_device.dev,
         },
         {
-        .supply         = "vdss_dsi",
+        .supply         = "vdds_dsi",
         .dev            = &devkit8000_dss_device.dev,
         }
 };
@@ -639,17 +624,21 @@ static struct omap_musb_board_data musb_board_data = {
 static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
 
         .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
-        .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
+        .port_mode[1] = EHCI_HCD_OMAP_MODE_UNKNOWN,
         .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
 
         .phy_reset  = true,
         .reset_gpio_port[0]  = -EINVAL,
-        .reset_gpio_port[1]  = 147,
+        .reset_gpio_port[1]  = -EINVAL,
         .reset_gpio_port[2]  = -EINVAL
 };
 
 static void __init devkit8000_init(void)
 {
+        omap_serial_init();
+
+        omap_dm9000_init();
+
         devkit8000_i2c_init();
         platform_add_devices(devkit8000_devices,
                         ARRAY_SIZE(devkit8000_devices));
@@ -659,25 +648,15 @@ static void __init devkit8000_init(void)
         spi_register_board_info(devkit8000_spi_board_info,
         ARRAY_SIZE(devkit8000_spi_board_info));
 
-        omap_serial_init();
-
-        omap_dm9000_init();
-
         devkit8000_ads7846_init();
 
-        omap_mux_init_gpio(170, OMAP_PIN_INPUT);
-
-        gpio_request(170, "DVI_nPD");
-        /* REVISIT leave DVI powered down until it's needed ... */
-        gpio_direction_output(170, true);
-
         usb_musb_init(&musb_board_data);
         usb_ehci_init(&ehci_pdata);
         devkit8000_flash_init();
 
         /* Ensure SDRC pins are mux'd for self-refresh */
-        omap_mux_init_signal("sdr_cke0", OMAP_PIN_OUTPUT);
-        omap_mux_init_signal("sdr_cke1", OMAP_PIN_OUTPUT);
+        omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
+        omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
 }
 
 static void __init devkit8000_map_io(void)