1 files changed, 23 insertions, 75 deletions

diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index 707354222d4c..ae3153c5396d 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -252,58 +252,22 @@ static struct spi_board_info sdp4430_spi_board_info[] __initdata = {
         },
 };
 
+static struct gpio sdp4430_eth_gpios[] __initdata = {
+        { ETH_KS8851_POWER_ON,  GPIOF_OUT_INIT_HIGH,    "eth_power"     },
+        { ETH_KS8851_QUART,     GPIOF_OUT_INIT_HIGH,    "quart"         },
+        { ETH_KS8851_IRQ,       GPIOF_IN,               "eth_irq"       },
+};
+
 static int omap_ethernet_init(void)
 {
         int status;
 
         /* Request of GPIO lines */
+        status = gpio_request_array(sdp4430_eth_gpios,
+                                    ARRAY_SIZE(sdp4430_eth_gpios));
+        if (status)
+                pr_err("Cannot request ETH GPIOs\n");
 
-        status = gpio_request(ETH_KS8851_POWER_ON, "eth_power");
-        if (status) {
-                pr_err("Cannot request GPIO %d\n", ETH_KS8851_POWER_ON);
-                return status;
-        }
-
-        status = gpio_request(ETH_KS8851_QUART, "quart");
-        if (status) {
-                pr_err("Cannot request GPIO %d\n", ETH_KS8851_QUART);
-                goto error1;
-        }
-
-        status = gpio_request(ETH_KS8851_IRQ, "eth_irq");
-        if (status) {
-                pr_err("Cannot request GPIO %d\n", ETH_KS8851_IRQ);
-                goto error2;
-        }
-
-        /* Configuration of requested GPIO lines */
-
-        status = gpio_direction_output(ETH_KS8851_POWER_ON, 1);
-        if (status) {
-                pr_err("Cannot set output GPIO %d\n", ETH_KS8851_IRQ);
-                goto error3;
-        }
-
-        status = gpio_direction_output(ETH_KS8851_QUART, 1);
-        if (status) {
-                pr_err("Cannot set output GPIO %d\n", ETH_KS8851_QUART);
-                goto error3;
-        }
-
-        status = gpio_direction_input(ETH_KS8851_IRQ);
-        if (status) {
-                pr_err("Cannot set input GPIO %d\n", ETH_KS8851_IRQ);
-                goto error3;
-        }
-
-        return 0;
-
-error3:
-        gpio_free(ETH_KS8851_IRQ);
-error2:
-        gpio_free(ETH_KS8851_QUART);
-error1:
-        gpio_free(ETH_KS8851_POWER_ON);
         return status;
 }
 
@@ -602,21 +566,13 @@ static int __init omap4_i2c_init(void)
 
 static void __init omap_sfh7741prox_init(void)
 {
-        int  error;
+        int error;
 
-        error = gpio_request(OMAP4_SFH7741_ENABLE_GPIO, "sfh7741");
-        if (error < 0) {
+        error = gpio_request_one(OMAP4_SFH7741_ENABLE_GPIO,
+                                 GPIOF_OUT_INIT_LOW, "sfh7741");
+        if (error < 0)
                 pr_err("%s:failed to request GPIO %d, error %d\n",
                         __func__, OMAP4_SFH7741_ENABLE_GPIO, error);
-                return;
-        }
-
-        error = gpio_direction_output(OMAP4_SFH7741_ENABLE_GPIO , 0);
-        if (error < 0) {
-                pr_err("%s: GPIO configuration failed: GPIO %d,error %d\n",
-                         __func__, OMAP4_SFH7741_ENABLE_GPIO, error);
-                gpio_free(OMAP4_SFH7741_ENABLE_GPIO);
-        }
 }
 
 static void sdp4430_hdmi_mux_init(void)
@@ -633,27 +589,19 @@ static void sdp4430_hdmi_mux_init(void)
                         OMAP_PIN_INPUT_PULLUP);
 }
 
+static struct gpio sdp4430_hdmi_gpios[] = {
+        { HDMI_GPIO_HPD,        GPIOF_OUT_INIT_HIGH,    "hdmi_gpio_hpd"   },
+        { HDMI_GPIO_LS_OE,      GPIOF_OUT_INIT_HIGH,    "hdmi_gpio_ls_oe" },
+};
+
 static int sdp4430_panel_enable_hdmi(struct omap_dss_device *dssdev)
 {
         int status;
 
-        status = gpio_request_one(HDMI_GPIO_HPD, GPIOF_OUT_INIT_HIGH,
-                                                        "hdmi_gpio_hpd");
-        if (status) {
-                pr_err("Cannot request GPIO %d\n", HDMI_GPIO_HPD);
-                return status;
-        }
-        status = gpio_request_one(HDMI_GPIO_LS_OE, GPIOF_OUT_INIT_HIGH,
-                                                        "hdmi_gpio_ls_oe");
-        if (status) {
-                pr_err("Cannot request GPIO %d\n", HDMI_GPIO_LS_OE);
-                goto error1;
-        }
-
-        return 0;
-
-error1:
-        gpio_free(HDMI_GPIO_HPD);
+        status = gpio_request_array(sdp4430_hdmi_gpios,
+                                    ARRAY_SIZE(sdp4430_hdmi_gpios));
+        if (status)
+                pr_err("%s: Cannot request HDMI GPIOs\n", __func__);
 
         return status;
 }