5 files changed, 46 insertions, 31 deletions

diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig
index e0a028161dde..73f287d6429b 100644
--- a/arch/arm/mach-omap1/Kconfig
+++ b/arch/arm/mach-omap1/Kconfig
@@ -171,14 +171,6 @@ config MACH_OMAP_GENERIC
 comment "OMAP CPU Speed"
         depends on ARCH_OMAP1
 
-config OMAP_CLOCKS_SET_BY_BOOTLOADER
-        bool "OMAP clocks set by bootloader"
-        depends on ARCH_OMAP1
-        help
-          Enable this option to prevent the kernel from overriding the clock
-          frequencies programmed by bootloader for MPU, DSP, MMUs, TC,
-          internal LCD controller and MPU peripherals.
-
 config OMAP_ARM_216MHZ
         bool "OMAP ARM 216 MHz CPU (1710 only)"
         depends on ARCH_OMAP1 && ARCH_OMAP16XX
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index 51bae31cf361..b0f15d234a12 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -302,8 +302,6 @@ static void __init ams_delta_init(void)
         omap_cfg_reg(J19_1610_CAM_D6);
         omap_cfg_reg(J18_1610_CAM_D7);
 
-        iotable_init(ams_delta_io_desc, ARRAY_SIZE(ams_delta_io_desc));
-
         omap_board_config = ams_delta_config;
         omap_board_config_size = ARRAY_SIZE(ams_delta_config);
         omap_serial_init();
@@ -373,10 +371,16 @@ static int __init ams_delta_modem_init(void)
 }
 arch_initcall(ams_delta_modem_init);
 
+static void __init ams_delta_map_io(void)
+{
+        omap15xx_map_io();
+        iotable_init(ams_delta_io_desc, ARRAY_SIZE(ams_delta_io_desc));
+}
+
 MACHINE_START(AMS_DELTA, "Amstrad E3 (Delta)")
         /* Maintainer: Jonathan McDowell <noodles@earth.li> */
         .atag_offset    = 0x100,
-        .map_io         = omap15xx_map_io,
+        .map_io         = ams_delta_map_io,
         .init_early     = omap1_init_early,
         .reserve        = omap_reserve,
         .init_irq       = omap1_init_irq,
diff --git a/arch/arm/mach-omap1/clock.h b/arch/arm/mach-omap1/clock.h
index eaf09efb91ca..16b1423b454a 100644
--- a/arch/arm/mach-omap1/clock.h
+++ b/arch/arm/mach-omap1/clock.h
@@ -17,7 +17,8 @@
 
 #include <plat/clock.h>
 
-extern int __init omap1_clk_init(void);
+int omap1_clk_init(void);
+void omap1_clk_late_init(void);
 extern int omap1_clk_enable(struct clk *clk);
 extern void omap1_clk_disable(struct clk *clk);
 extern long omap1_clk_round_rate(struct clk *clk, unsigned long rate);
diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c
index 92400b9eb69f..1297bb58869c 100644
--- a/arch/arm/mach-omap1/clock_data.c
+++ b/arch/arm/mach-omap1/clock_data.c
@@ -767,6 +767,15 @@ static struct clk_functions omap1_clk_functions = {
         .clk_disable_unused     = omap1_clk_disable_unused,
 };
 
+static void __init omap1_show_rates(void)
+{
+        pr_notice("Clocking rate (xtal/DPLL1/MPU): "
+                        "%ld.%01ld/%ld.%01ld/%ld.%01ld MHz\n",
+                ck_ref.rate / 1000000, (ck_ref.rate / 100000) % 10,
+                ck_dpll1.rate / 1000000, (ck_dpll1.rate / 100000) % 10,
+                arm_ck.rate / 1000000, (arm_ck.rate / 100000) % 10);
+}
+
 int __init omap1_clk_init(void)
 {
         struct omap_clk *c;
@@ -835,9 +844,12 @@ int __init omap1_clk_init(void)
         /* We want to be in syncronous scalable mode */
         omap_writew(0x1000, ARM_SYSST);
 
-#ifdef CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER
-        /* Use values set by bootloader. Determine PLL rate and recalculate
-         * dependent clocks as if kernel had changed PLL or divisors.
+
+        /*
+         * Initially use the values set by bootloader. Determine PLL rate and
+         * recalculate dependent clocks as if kernel had changed PLL or
+         * divisors. See also omap1_clk_late_init() that can reprogram dpll1
+         * after the SRAM is initialized.
          */
         {
                 unsigned pll_ctl_val = omap_readw(DPLL_CTL);
@@ -862,25 +874,10 @@ int __init omap1_clk_init(void)
                         }
                 }
         }
-#else
-        /* Find the highest supported frequency and enable it */
-        if (omap1_select_table_rate(&virtual_ck_mpu, ~0)) {
-                printk(KERN_ERR "System frequencies not set. Check your config.\n");
-                /* Guess sane values (60MHz) */
-                omap_writew(0x2290, DPLL_CTL);
-                omap_writew(cpu_is_omap7xx() ? 0x3005 : 0x1005, ARM_CKCTL);
-                ck_dpll1.rate = 60000000;
-        }
-#endif
         propagate_rate(&ck_dpll1);
         /* Cache rates for clocks connected to ck_ref (not dpll1) */
         propagate_rate(&ck_ref);
-        printk(KERN_INFO "Clocking rate (xtal/DPLL1/MPU): "
-                "%ld.%01ld/%ld.%01ld/%ld.%01ld MHz\n",
-               ck_ref.rate / 1000000, (ck_ref.rate / 100000) % 10,
-               ck_dpll1.rate / 1000000, (ck_dpll1.rate / 100000) % 10,
-               arm_ck.rate / 1000000, (arm_ck.rate / 100000) % 10);
-
+        omap1_show_rates();
         if (machine_is_omap_perseus2() || machine_is_omap_fsample()) {
                 /* Select slicer output as OMAP input clock */
                 omap_writew(omap_readw(OMAP7XX_PCC_UPLD_CTRL) & ~0x1,
@@ -925,3 +922,21 @@ int __init omap1_clk_init(void)
 
         return 0;
 }
+
+#define OMAP1_DPLL1_SANE_VALUE  60000000
+
+void __init omap1_clk_late_init(void)
+{
+        if (ck_dpll1.rate >= OMAP1_DPLL1_SANE_VALUE)
+                return;
+
+        /* Find the highest supported frequency and enable it */
+        if (omap1_select_table_rate(&virtual_ck_mpu, ~0)) {
+                pr_err("System frequencies not set, using default. Check your config.\n");
+                omap_writew(0x2290, DPLL_CTL);
+                omap_writew(cpu_is_omap7xx() ? 0x3005 : 0x1005, ARM_CKCTL);
+                ck_dpll1.rate = OMAP1_DPLL1_SANE_VALUE;
+        }
+        propagate_rate(&ck_dpll1);
+        omap1_show_rates();
+}
diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c
index 48ef9888e820..475cb2f50d87 100644
--- a/arch/arm/mach-omap1/devices.c
+++ b/arch/arm/mach-omap1/devices.c
@@ -30,6 +30,8 @@
 #include <plat/omap7xx.h>
 #include <plat/mcbsp.h>
 
+#include "clock.h"
+
 /*-------------------------------------------------------------------------*/
 
 #if defined(CONFIG_RTC_DRV_OMAP) || defined(CONFIG_RTC_DRV_OMAP_MODULE)
@@ -293,6 +295,7 @@ static int __init omap1_init_devices(void)
                 return -ENODEV;
 
         omap_sram_init();
+        omap1_clk_late_init();
 
         /* please keep these calls, and their implementations above,
          * in alphabetical order so they're easier to sort through.