1 files changed, 10 insertions, 3 deletions

diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index a66505f58b15..82ec34c43bc5 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -267,13 +267,17 @@ static struct i2c_board_info __initdata osk_i2c_board_info[] = {
 
 static void __init osk_init_smc91x(void)
 {
+        u32 l;
+
         if ((gpio_request(0, "smc_irq")) < 0) {
                 printk("Error requesting gpio 0 for smc91x irq\n");
                 return;
         }
 
         /* Check EMIFS wait states to fix errors with SMC_GET_PKT_HDR */
-        EMIFS_CCS(1) |= 0x3;
+        l = omap_readl(EMIFS_CCS(1));
+        l |= 0x3;
+        omap_writel(l, EMIFS_CCS(1));
 }
 
 static void __init osk_init_cf(void)
@@ -526,13 +530,16 @@ static void __init osk_mistral_init(void) { }
 
 static void __init osk_init(void)
 {
+        u32 l;
+
         /* Workaround for wrong CS3 (NOR flash) timing
          * There are some U-Boot versions out there which configure
          * wrong CS3 memory timings. This mainly leads to CRC
          * or similar errors if you use NOR flash (e.g. with JFFS2)
          */
-        if (EMIFS_CCS(3) != EMIFS_CS3_VAL)
-                EMIFS_CCS(3) = EMIFS_CS3_VAL;
+        l = omap_readl(EMIFS_CCS(3));
+        if (l != EMIFS_CS3_VAL)
+                omap_writel(EMIFS_CS3_VAL, EMIFS_CCS(3));
 
         osk_flash_resource.end = osk_flash_resource.start = omap_cs3_phys();
         osk_flash_resource.end += SZ_32M - 1;