1 files changed, 34 insertions, 19 deletions

diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c
index 92400b9eb69f..1297bb58869c 100644
--- a/arch/arm/mach-omap1/clock_data.c
+++ b/arch/arm/mach-omap1/clock_data.c
@@ -767,6 +767,15 @@ static struct clk_functions omap1_clk_functions = {
         .clk_disable_unused     = omap1_clk_disable_unused,
 };
 
+static void __init omap1_show_rates(void)
+{
+        pr_notice("Clocking rate (xtal/DPLL1/MPU): "
+                        "%ld.%01ld/%ld.%01ld/%ld.%01ld MHz\n",
+                ck_ref.rate / 1000000, (ck_ref.rate / 100000) % 10,
+                ck_dpll1.rate / 1000000, (ck_dpll1.rate / 100000) % 10,
+                arm_ck.rate / 1000000, (arm_ck.rate / 100000) % 10);
+}
+
 int __init omap1_clk_init(void)
 {
         struct omap_clk *c;
@@ -835,9 +844,12 @@ int __init omap1_clk_init(void)
         /* We want to be in syncronous scalable mode */
         omap_writew(0x1000, ARM_SYSST);
 
-#ifdef CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER
-        /* Use values set by bootloader. Determine PLL rate and recalculate
-         * dependent clocks as if kernel had changed PLL or divisors.
+
+        /*
+         * Initially use the values set by bootloader. Determine PLL rate and
+         * recalculate dependent clocks as if kernel had changed PLL or
+         * divisors. See also omap1_clk_late_init() that can reprogram dpll1
+         * after the SRAM is initialized.
          */
         {
                 unsigned pll_ctl_val = omap_readw(DPLL_CTL);
@@ -862,25 +874,10 @@ int __init omap1_clk_init(void)
                         }
                 }
         }
-#else
-        /* Find the highest supported frequency and enable it */
-        if (omap1_select_table_rate(&virtual_ck_mpu, ~0)) {
-                printk(KERN_ERR "System frequencies not set. Check your config.\n");
-                /* Guess sane values (60MHz) */
-                omap_writew(0x2290, DPLL_CTL);
-                omap_writew(cpu_is_omap7xx() ? 0x3005 : 0x1005, ARM_CKCTL);
-                ck_dpll1.rate = 60000000;
-        }
-#endif
         propagate_rate(&ck_dpll1);
         /* Cache rates for clocks connected to ck_ref (not dpll1) */
         propagate_rate(&ck_ref);
-        printk(KERN_INFO "Clocking rate (xtal/DPLL1/MPU): "
-                "%ld.%01ld/%ld.%01ld/%ld.%01ld MHz\n",
-               ck_ref.rate / 1000000, (ck_ref.rate / 100000) % 10,
-               ck_dpll1.rate / 1000000, (ck_dpll1.rate / 100000) % 10,
-               arm_ck.rate / 1000000, (arm_ck.rate / 100000) % 10);
-
+        omap1_show_rates();
         if (machine_is_omap_perseus2() || machine_is_omap_fsample()) {
                 /* Select slicer output as OMAP input clock */
                 omap_writew(omap_readw(OMAP7XX_PCC_UPLD_CTRL) & ~0x1,
@@ -925,3 +922,21 @@ int __init omap1_clk_init(void)
 
         return 0;
 }
+
+#define OMAP1_DPLL1_SANE_VALUE  60000000
+
+void __init omap1_clk_late_init(void)
+{
+        if (ck_dpll1.rate >= OMAP1_DPLL1_SANE_VALUE)
+                return;
+
+        /* Find the highest supported frequency and enable it */
+        if (omap1_select_table_rate(&virtual_ck_mpu, ~0)) {
+                pr_err("System frequencies not set, using default. Check your config.\n");
+                omap_writew(0x2290, DPLL_CTL);
+                omap_writew(cpu_is_omap7xx() ? 0x3005 : 0x1005, ARM_CKCTL);
+                ck_dpll1.rate = OMAP1_DPLL1_SANE_VALUE;
+        }
+        propagate_rate(&ck_dpll1);
+        omap1_show_rates();
+}