1 files changed, 99 insertions, 0 deletions

diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c
new file mode 100644
index 000000000000..122796ebe8f5
--- /dev/null
+++ b/arch/arm/mach-omap1/board-generic.c
@@ -0,0 +1,99 @@
+/*
+ * linux/arch/arm/mach-omap1/board-generic.c
+ *
+ * Modified from board-innovator1510.c
+ *
+ * Code for generic OMAP board. Should work on many OMAP systems where
+ * the device drivers take care of all the necessary hardware initialization.
+ * Do not put any board specific code to this file; create a new machine
+ * type if you need custom low-level initializations.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/device.h>
+
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <asm/arch/gpio.h>
+#include <asm/arch/mux.h>
+#include <asm/arch/usb.h>
+#include <asm/arch/board.h>
+#include <asm/arch/common.h>
+
+static int __initdata generic_serial_ports[OMAP_MAX_NR_PORTS] = {1, 1, 1};
+
+static void __init omap_generic_init_irq(void)
+{
+        omap_init_irq();
+}
+
+/* assume no Mini-AB port */
+
+#ifdef CONFIG_ARCH_OMAP1510
+static struct omap_usb_config generic1510_usb_config __initdata = {
+        .register_host  = 1,
+        .register_dev   = 1,
+        .hmc_mode       = 16,
+        .pins[0]        = 3,
+};
+#endif
+
+#if defined(CONFIG_ARCH_OMAP16XX)
+static struct omap_usb_config generic1610_usb_config __initdata = {
+        .register_host  = 1,
+        .register_dev   = 1,
+        .hmc_mode       = 16,
+        .pins[0]        = 6,
+};
+#endif
+
+static struct omap_board_config_kernel generic_config[] = {
+        { OMAP_TAG_USB,           NULL },
+};
+
+static void __init omap_generic_init(void)
+{
+        /*
+         * Make sure the serial ports are muxed on at this point.
+         * You have to mux them off in device drivers later on
+         * if not needed.
+         */
+#ifdef CONFIG_ARCH_OMAP1510
+        if (cpu_is_omap1510()) {
+                generic_config[0].data = &generic1510_usb_config;
+        }
+#endif
+#if defined(CONFIG_ARCH_OMAP16XX)
+        if (!cpu_is_omap1510()) {
+                generic_config[0].data = &generic1610_usb_config;
+        }
+#endif
+        omap_board_config = generic_config;
+        omap_board_config_size = ARRAY_SIZE(generic_config);
+        omap_serial_init(generic_serial_ports);
+}
+
+static void __init omap_generic_map_io(void)
+{
+        omap_map_common_io()
+}
+
+MACHINE_START(OMAP_GENERIC, "Generic OMAP1510/1610/1710")
+        /* Maintainer: Tony Lindgren <tony@atomide.com> */
+        .phys_ram       = 0x10000000,
+        .phys_io        = 0xfff00000,
+        .io_pg_offst    = ((0xfef00000) >> 18) & 0xfffc,
+        .boot_params    = 0x10000100,
+        .map_io         = omap_generic_map_io,
+        .init_irq       = omap_generic_init_irq,
+        .init_machine   = omap_generic_init,
+        .timer          = &omap_timer,
+MACHINE_END