1 files changed, 0 insertions, 123 deletions

diff --git a/arch/arm/mach-mxs/mach-stmp378x_devb.c b/arch/arm/mach-mxs/mach-stmp378x_devb.c
deleted file mode 100644
index 6548965e4a76..000000000000
--- a/arch/arm/mach-mxs/mach-stmp378x_devb.c
+++ /dev/null
@@ -1,123 +0,0 @@
-/*
- * board setup for STMP378x-Development-Board
- *
- * based on mx23evk board setup and information gained form the original
- * plat-stmp based board setup, now converted to mach-mxs.
- *
- * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright (C) 2011 Wolfram Sang, Pengutronix e.K.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/spi/spi.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include <mach/common.h>
-#include <mach/iomux-mx23.h>
-
-#include "devices-mx23.h"
-
-#define STMP378X_DEVB_MMC0_WRITE_PROTECT        MXS_GPIO_NR(1, 30)
-#define STMP378X_DEVB_MMC0_SLOT_POWER           MXS_GPIO_NR(1, 29)
-
-#define STMP378X_DEVB_PAD_AUART (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL)
-
-static const iomux_cfg_t stmp378x_dvb_pads[] __initconst = {
-        /* duart (extended setup missing in old boardcode, too */
-        MX23_PAD_PWM0__DUART_RX,
-        MX23_PAD_PWM1__DUART_TX,
-
-        /* auart */
-        MX23_PAD_AUART1_RX__AUART1_RX | STMP378X_DEVB_PAD_AUART,
-        MX23_PAD_AUART1_TX__AUART1_TX | STMP378X_DEVB_PAD_AUART,
-        MX23_PAD_AUART1_CTS__AUART1_CTS | STMP378X_DEVB_PAD_AUART,
-        MX23_PAD_AUART1_RTS__AUART1_RTS | STMP378X_DEVB_PAD_AUART,
-
-        /* mmc */
-        MX23_PAD_SSP1_DATA0__SSP1_DATA0 |
-                (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-        MX23_PAD_SSP1_DATA1__SSP1_DATA1 |
-                (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-        MX23_PAD_SSP1_DATA2__SSP1_DATA2 |
-                (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-        MX23_PAD_SSP1_DATA3__SSP1_DATA3 |
-                (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-        MX23_PAD_SSP1_CMD__SSP1_CMD |
-                (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-        MX23_PAD_SSP1_DETECT__SSP1_DETECT |
-                (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-        MX23_PAD_SSP1_SCK__SSP1_SCK |
-                (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-        MX23_PAD_PWM4__GPIO_1_30 | MXS_PAD_CTRL, /* write protect */
-        MX23_PAD_PWM3__GPIO_1_29 | MXS_PAD_CTRL, /* power enable */
-};
-
-static struct mxs_mmc_platform_data stmp378x_dvb_mmc_pdata __initdata = {
-        .wp_gpio = STMP378X_DEVB_MMC0_WRITE_PROTECT,
-};
-
-static struct spi_board_info spi_board_info[] __initdata = {
-#if defined(CONFIG_ENC28J60) || defined(CONFIG_ENC28J60_MODULE)
-        {
-                .modalias       = "enc28j60",
-                .max_speed_hz   = 6 * 1000 * 1000,
-                .bus_num        = 1,
-                .chip_select    = 0,
-                .platform_data  = NULL,
-        },
-#endif
-};
-
-static void __init stmp378x_dvb_init(void)
-{
-        int ret;
-
-        mx23_soc_init();
-
-        mxs_iomux_setup_multiple_pads(stmp378x_dvb_pads,
-                        ARRAY_SIZE(stmp378x_dvb_pads));
-
-        mx23_add_duart();
-        mx23_add_auart0();
-        mx23_add_rtc_stmp3xxx();
-
-        /* power on mmc slot */
-        ret = gpio_request_one(STMP378X_DEVB_MMC0_SLOT_POWER,
-                GPIOF_OUT_INIT_LOW, "mmc0-slot-power");
-        if (ret)
-                pr_warn("could not power mmc (%d)\n", ret);
-
-        mx23_add_mxs_mmc(0, &stmp378x_dvb_mmc_pdata);
-
-        spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
-}
-
-static void __init stmp378x_dvb_timer_init(void)
-{
-        mx23_clocks_init();
-}
-
-static struct sys_timer stmp378x_dvb_timer = {
-        .init   = stmp378x_dvb_timer_init,
-};
-
-MACHINE_START(STMP378X, "STMP378X")
-        .map_io         = mx23_map_io,
-        .init_irq       = mx23_init_irq,
-        .timer          = &stmp378x_dvb_timer,
-        .init_machine   = stmp378x_dvb_init,
-        .restart        = mxs_restart,
-MACHINE_END