1 files changed, 559 insertions, 0 deletions

diff --git a/arch/arm/mach-mx3/mach-mx31ads.c b/arch/arm/mach-mx3/mach-mx31ads.c
new file mode 100644
index 000000000000..b3d1a1895c20
--- /dev/null
+++ b/arch/arm/mach-mx3/mach-mx31ads.c
@@ -0,0 +1,559 @@
+/*
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
+ *  Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/serial_8250.h>
+#include <linux/gpio.h>
+#include <linux/i2c.h>
+#include <linux/irq.h>
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/memory.h>
+#include <asm/mach/map.h>
+#include <mach/common.h>
+#include <mach/board-mx31ads.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux-mx3.h>
+
+#ifdef CONFIG_MACH_MX31ADS_WM1133_EV1
+#include <linux/mfd/wm8350/audio.h>
+#include <linux/mfd/wm8350/core.h>
+#include <linux/mfd/wm8350/pmic.h>
+#endif
+
+#include "devices.h"
+
+/*!
+ * @file mx31ads.c
+ *
+ * @brief This file contains the board-specific initialization routines.
+ *
+ * @ingroup System
+ */
+
+#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
+/*!
+ * The serial port definition structure.
+ */
+static struct plat_serial8250_port serial_platform_data[] = {
+        {
+                .membase  = (void *)(PBC_BASE_ADDRESS + PBC_SC16C652_UARTA),
+                .mapbase  = (unsigned long)(MX31_CS4_BASE_ADDR + PBC_SC16C652_UARTA),
+                .irq      = EXPIO_INT_XUART_INTA,
+                .uartclk  = 14745600,
+                .regshift = 0,
+                .iotype   = UPIO_MEM,
+                .flags    = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_AUTO_IRQ,
+        }, {
+                .membase  = (void *)(PBC_BASE_ADDRESS + PBC_SC16C652_UARTB),
+                .mapbase  = (unsigned long)(MX31_CS4_BASE_ADDR + PBC_SC16C652_UARTB),
+                .irq      = EXPIO_INT_XUART_INTB,
+                .uartclk  = 14745600,
+                .regshift = 0,
+                .iotype   = UPIO_MEM,
+                .flags    = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_AUTO_IRQ,
+        },
+        {},
+};
+
+static struct platform_device serial_device = {
+        .name   = "serial8250",
+        .id     = 0,
+        .dev    = {
+                .platform_data = serial_platform_data,
+        },
+};
+
+static int __init mxc_init_extuart(void)
+{
+        return platform_device_register(&serial_device);
+}
+#else
+static inline int mxc_init_extuart(void)
+{
+        return 0;
+}
+#endif
+
+#if defined(CONFIG_SERIAL_IMX) || defined(CONFIG_SERIAL_IMX_MODULE)
+static struct imxuart_platform_data uart_pdata = {
+        .flags = IMXUART_HAVE_RTSCTS,
+};
+
+static unsigned int uart_pins[] = {
+        MX31_PIN_CTS1__CTS1,
+        MX31_PIN_RTS1__RTS1,
+        MX31_PIN_TXD1__TXD1,
+        MX31_PIN_RXD1__RXD1
+};
+
+static inline void mxc_init_imx_uart(void)
+{
+        mxc_iomux_setup_multiple_pins(uart_pins, ARRAY_SIZE(uart_pins), "uart-0");
+        mxc_register_device(&mxc_uart_device0, &uart_pdata);
+}
+#else /* !SERIAL_IMX */
+static inline void mxc_init_imx_uart(void)
+{
+}
+#endif /* !SERIAL_IMX */
+
+static void mx31ads_expio_irq_handler(u32 irq, struct irq_desc *desc)
+{
+        u32 imr_val;
+        u32 int_valid;
+        u32 expio_irq;
+
+        imr_val = __raw_readw(PBC_INTMASK_SET_REG);
+        int_valid = __raw_readw(PBC_INTSTATUS_REG) & imr_val;
+
+        expio_irq = MXC_EXP_IO_BASE;
+        for (; int_valid != 0; int_valid >>= 1, expio_irq++) {
+                if ((int_valid & 1) == 0)
+                        continue;
+
+                generic_handle_irq(expio_irq);
+        }
+}
+
+/*
+ * Disable an expio pin's interrupt by setting the bit in the imr.
+ * @param irq           an expio virtual irq number
+ */
+static void expio_mask_irq(u32 irq)
+{
+        u32 expio = MXC_IRQ_TO_EXPIO(irq);
+        /* mask the interrupt */
+        __raw_writew(1 << expio, PBC_INTMASK_CLEAR_REG);
+        __raw_readw(PBC_INTMASK_CLEAR_REG);
+}
+
+/*
+ * Acknowledge an expanded io pin's interrupt by clearing the bit in the isr.
+ * @param irq           an expanded io virtual irq number
+ */
+static void expio_ack_irq(u32 irq)
+{
+        u32 expio = MXC_IRQ_TO_EXPIO(irq);
+        /* clear the interrupt status */
+        __raw_writew(1 << expio, PBC_INTSTATUS_REG);
+}
+
+/*
+ * Enable a expio pin's interrupt by clearing the bit in the imr.
+ * @param irq           a expio virtual irq number
+ */
+static void expio_unmask_irq(u32 irq)
+{
+        u32 expio = MXC_IRQ_TO_EXPIO(irq);
+        /* unmask the interrupt */
+        __raw_writew(1 << expio, PBC_INTMASK_SET_REG);
+}
+
+static struct irq_chip expio_irq_chip = {
+        .name = "EXPIO(CPLD)",
+        .ack = expio_ack_irq,
+        .mask = expio_mask_irq,
+        .unmask = expio_unmask_irq,
+};
+
+static void __init mx31ads_init_expio(void)
+{
+        int i;
+
+        printk(KERN_INFO "MX31ADS EXPIO(CPLD) hardware\n");
+
+        /*
+         * Configure INT line as GPIO input
+         */
+        mxc_iomux_alloc_pin(IOMUX_MODE(MX31_PIN_GPIO1_4, IOMUX_CONFIG_GPIO), "expio");
+
+        /* disable the interrupt and clear the status */
+        __raw_writew(0xFFFF, PBC_INTMASK_CLEAR_REG);
+        __raw_writew(0xFFFF, PBC_INTSTATUS_REG);
+        for (i = MXC_EXP_IO_BASE; i < (MXC_EXP_IO_BASE + MXC_MAX_EXP_IO_LINES);
+             i++) {
+                set_irq_chip(i, &expio_irq_chip);
+                set_irq_handler(i, handle_level_irq);
+                set_irq_flags(i, IRQF_VALID);
+        }
+        set_irq_type(EXPIO_PARENT_INT, IRQ_TYPE_LEVEL_HIGH);
+        set_irq_chained_handler(EXPIO_PARENT_INT, mx31ads_expio_irq_handler);
+}
+
+#ifdef CONFIG_MACH_MX31ADS_WM1133_EV1
+/* This section defines setup for the Wolfson Microelectronics
+ * 1133-EV1 PMU/audio board.  When other PMU boards are supported the
+ * regulator definitions may be shared with them, but for now they can
+ * only be used with this board so would generate warnings about
+ * unused statics and some of the configuration is specific to this
+ * module.
+ */
+
+/* CPU */
+static struct regulator_consumer_supply sw1a_consumers[] = {
+        {
+                .supply = "cpu_vcc",
+        }
+};
+
+static struct regulator_init_data sw1a_data = {
+        .constraints = {
+                .name = "SW1A",
+                .min_uV = 1275000,
+                .max_uV = 1600000,
+                .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+                                  REGULATOR_CHANGE_MODE,
+                .valid_modes_mask = REGULATOR_MODE_NORMAL |
+                                    REGULATOR_MODE_FAST,
+                .state_mem = {
+                         .uV = 1400000,
+                         .mode = REGULATOR_MODE_NORMAL,
+                         .enabled = 1,
+                 },
+                .initial_state = PM_SUSPEND_MEM,
+                .always_on = 1,
+                .boot_on = 1,
+        },
+        .num_consumer_supplies = ARRAY_SIZE(sw1a_consumers),
+        .consumer_supplies = sw1a_consumers,
+};
+
+/* System IO - High */
+static struct regulator_init_data viohi_data = {
+        .constraints = {
+                .name = "VIOHO",
+                .min_uV = 2800000,
+                .max_uV = 2800000,
+                .state_mem = {
+                         .uV = 2800000,
+                         .mode = REGULATOR_MODE_NORMAL,
+                         .enabled = 1,
+                 },
+                .initial_state = PM_SUSPEND_MEM,
+                .always_on = 1,
+                .boot_on = 1,
+        },
+};
+
+/* System IO - Low */
+static struct regulator_init_data violo_data = {
+        .constraints = {
+                .name = "VIOLO",
+                .min_uV = 1800000,
+                .max_uV = 1800000,
+                .state_mem = {
+                         .uV = 1800000,
+                         .mode = REGULATOR_MODE_NORMAL,
+                         .enabled = 1,
+                 },
+                .initial_state = PM_SUSPEND_MEM,
+                .always_on = 1,
+                .boot_on = 1,
+        },
+};
+
+/* DDR RAM */
+static struct regulator_init_data sw2a_data = {
+        .constraints = {
+                .name = "SW2A",
+                .min_uV = 1800000,
+                .max_uV = 1800000,
+                .valid_modes_mask = REGULATOR_MODE_NORMAL,
+                .state_mem = {
+                         .uV = 1800000,
+                         .mode = REGULATOR_MODE_NORMAL,
+                         .enabled = 1,
+                 },
+                .state_disk = {
+                         .mode = REGULATOR_MODE_NORMAL,
+                         .enabled = 0,
+                 },
+                .always_on = 1,
+                .boot_on = 1,
+                .initial_state = PM_SUSPEND_MEM,
+        },
+};
+
+static struct regulator_init_data ldo1_data = {
+        .constraints = {
+                .name = "VCAM/VMMC1/VMMC2",
+                .min_uV = 2800000,
+                .max_uV = 2800000,
+                .valid_modes_mask = REGULATOR_MODE_NORMAL,
+                .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+                .apply_uV = 1,
+        },
+};
+
+static struct regulator_consumer_supply ldo2_consumers[] = {
+        { .supply = "AVDD", .dev_name = "1-001a" },
+        { .supply = "HPVDD", .dev_name = "1-001a" },
+};
+
+/* CODEC and SIM */
+static struct regulator_init_data ldo2_data = {
+        .constraints = {
+                .name = "VESIM/VSIM/AVDD",
+                .min_uV = 3300000,
+                .max_uV = 3300000,
+                .valid_modes_mask = REGULATOR_MODE_NORMAL,
+                .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+                .apply_uV = 1,
+        },
+        .num_consumer_supplies = ARRAY_SIZE(ldo2_consumers),
+        .consumer_supplies = ldo2_consumers,
+};
+
+/* General */
+static struct regulator_init_data vdig_data = {
+        .constraints = {
+                .name = "VDIG",
+                .min_uV = 1500000,
+                .max_uV = 1500000,
+                .valid_modes_mask = REGULATOR_MODE_NORMAL,
+                .apply_uV = 1,
+                .always_on = 1,
+                .boot_on = 1,
+        },
+};
+
+/* Tranceivers */
+static struct regulator_init_data ldo4_data = {
+        .constraints = {
+                .name = "VRF1/CVDD_2.775",
+                .min_uV = 2500000,
+                .max_uV = 2500000,
+                .valid_modes_mask = REGULATOR_MODE_NORMAL,
+                .apply_uV = 1,
+                .always_on = 1,
+                .boot_on = 1,
+        },
+};
+
+static struct wm8350_led_platform_data wm8350_led_data = {
+        .name            = "wm8350:white",
+        .default_trigger = "heartbeat",
+        .max_uA          = 27899,
+};
+
+static struct wm8350_audio_platform_data imx32ads_wm8350_setup = {
+        .vmid_discharge_msecs = 1000,
+        .drain_msecs = 30,
+        .cap_discharge_msecs = 700,
+        .vmid_charge_msecs = 700,
+        .vmid_s_curve = WM8350_S_CURVE_SLOW,
+        .dis_out4 = WM8350_DISCHARGE_SLOW,
+        .dis_out3 = WM8350_DISCHARGE_SLOW,
+        .dis_out2 = WM8350_DISCHARGE_SLOW,
+        .dis_out1 = WM8350_DISCHARGE_SLOW,
+        .vroi_out4 = WM8350_TIE_OFF_500R,
+        .vroi_out3 = WM8350_TIE_OFF_500R,
+        .vroi_out2 = WM8350_TIE_OFF_500R,
+        .vroi_out1 = WM8350_TIE_OFF_500R,
+        .vroi_enable = 0,
+        .codec_current_on = WM8350_CODEC_ISEL_1_0,
+        .codec_current_standby = WM8350_CODEC_ISEL_0_5,
+        .codec_current_charge = WM8350_CODEC_ISEL_1_5,
+};
+
+static int mx31_wm8350_init(struct wm8350 *wm8350)
+{
+        wm8350_gpio_config(wm8350, 0, WM8350_GPIO_DIR_IN,
+                           WM8350_GPIO0_PWR_ON_IN, WM8350_GPIO_ACTIVE_LOW,
+                           WM8350_GPIO_PULL_UP, WM8350_GPIO_INVERT_OFF,
+                           WM8350_GPIO_DEBOUNCE_ON);
+
+        wm8350_gpio_config(wm8350, 3, WM8350_GPIO_DIR_IN,
+                           WM8350_GPIO3_PWR_OFF_IN, WM8350_GPIO_ACTIVE_HIGH,
+                           WM8350_GPIO_PULL_DOWN, WM8350_GPIO_INVERT_OFF,
+                           WM8350_GPIO_DEBOUNCE_ON);
+
+        wm8350_gpio_config(wm8350, 4, WM8350_GPIO_DIR_IN,
+                           WM8350_GPIO4_MR_IN, WM8350_GPIO_ACTIVE_HIGH,
+                           WM8350_GPIO_PULL_DOWN, WM8350_GPIO_INVERT_OFF,
+                           WM8350_GPIO_DEBOUNCE_OFF);
+
+        wm8350_gpio_config(wm8350, 7, WM8350_GPIO_DIR_IN,
+                           WM8350_GPIO7_HIBERNATE_IN, WM8350_GPIO_ACTIVE_HIGH,
+                           WM8350_GPIO_PULL_DOWN, WM8350_GPIO_INVERT_OFF,
+                           WM8350_GPIO_DEBOUNCE_OFF);
+
+        wm8350_gpio_config(wm8350, 6, WM8350_GPIO_DIR_OUT,
+                           WM8350_GPIO6_SDOUT_OUT, WM8350_GPIO_ACTIVE_HIGH,
+                           WM8350_GPIO_PULL_NONE, WM8350_GPIO_INVERT_OFF,
+                           WM8350_GPIO_DEBOUNCE_OFF);
+
+        wm8350_gpio_config(wm8350, 8, WM8350_GPIO_DIR_OUT,
+                           WM8350_GPIO8_VCC_FAULT_OUT, WM8350_GPIO_ACTIVE_LOW,
+                           WM8350_GPIO_PULL_NONE, WM8350_GPIO_INVERT_OFF,
+                           WM8350_GPIO_DEBOUNCE_OFF);
+
+        wm8350_gpio_config(wm8350, 9, WM8350_GPIO_DIR_OUT,
+                           WM8350_GPIO9_BATT_FAULT_OUT, WM8350_GPIO_ACTIVE_LOW,
+                           WM8350_GPIO_PULL_NONE, WM8350_GPIO_INVERT_OFF,
+                           WM8350_GPIO_DEBOUNCE_OFF);
+
+        wm8350_register_regulator(wm8350, WM8350_DCDC_1, &sw1a_data);
+        wm8350_register_regulator(wm8350, WM8350_DCDC_3, &viohi_data);
+        wm8350_register_regulator(wm8350, WM8350_DCDC_4, &violo_data);
+        wm8350_register_regulator(wm8350, WM8350_DCDC_6, &sw2a_data);
+        wm8350_register_regulator(wm8350, WM8350_LDO_1, &ldo1_data);
+        wm8350_register_regulator(wm8350, WM8350_LDO_2, &ldo2_data);
+        wm8350_register_regulator(wm8350, WM8350_LDO_3, &vdig_data);
+        wm8350_register_regulator(wm8350, WM8350_LDO_4, &ldo4_data);
+
+        /* LEDs */
+        wm8350_dcdc_set_slot(wm8350, WM8350_DCDC_5, 1, 1,
+                             WM8350_DC5_ERRACT_SHUTDOWN_CONV);
+        wm8350_isink_set_flash(wm8350, WM8350_ISINK_A,
+                               WM8350_ISINK_FLASH_DISABLE,
+                               WM8350_ISINK_FLASH_TRIG_BIT,
+                               WM8350_ISINK_FLASH_DUR_32MS,
+                               WM8350_ISINK_FLASH_ON_INSTANT,
+                               WM8350_ISINK_FLASH_OFF_INSTANT,
+                               WM8350_ISINK_FLASH_MODE_EN);
+        wm8350_dcdc25_set_mode(wm8350, WM8350_DCDC_5,
+                               WM8350_ISINK_MODE_BOOST,
+                               WM8350_ISINK_ILIM_NORMAL,
+                               WM8350_DC5_RMP_20V,
+                               WM8350_DC5_FBSRC_ISINKA);
+        wm8350_register_led(wm8350, 0, WM8350_DCDC_5, WM8350_ISINK_A,
+                            &wm8350_led_data);
+
+        wm8350->codec.platform_data = &imx32ads_wm8350_setup;
+
+        regulator_has_full_constraints();
+
+        return 0;
+}
+
+static struct wm8350_platform_data __initdata mx31_wm8350_pdata = {
+        .init = mx31_wm8350_init,
+        .irq_base = MXC_BOARD_IRQ_START + MXC_MAX_EXP_IO_LINES,
+};
+#endif
+
+#if defined(CONFIG_I2C_IMX) || defined(CONFIG_I2C_IMX_MODULE)
+static struct i2c_board_info __initdata mx31ads_i2c1_devices[] = {
+#ifdef CONFIG_MACH_MX31ADS_WM1133_EV1
+        {
+                I2C_BOARD_INFO("wm8350", 0x1a),
+                .platform_data = &mx31_wm8350_pdata,
+                .irq = IOMUX_TO_IRQ(MX31_PIN_GPIO1_3),
+        },
+#endif
+};
+
+static void mxc_init_i2c(void)
+{
+        i2c_register_board_info(1, mx31ads_i2c1_devices,
+                                ARRAY_SIZE(mx31ads_i2c1_devices));
+
+        mxc_iomux_mode(IOMUX_MODE(MX31_PIN_CSPI2_MOSI, IOMUX_CONFIG_ALT1));
+        mxc_iomux_mode(IOMUX_MODE(MX31_PIN_CSPI2_MISO, IOMUX_CONFIG_ALT1));
+
+        mxc_register_device(&mxc_i2c_device1, NULL);
+}
+#else
+static void mxc_init_i2c(void)
+{
+}
+#endif
+
+static unsigned int ssi_pins[] = {
+        MX31_PIN_SFS5__SFS5,
+        MX31_PIN_SCK5__SCK5,
+        MX31_PIN_SRXD5__SRXD5,
+        MX31_PIN_STXD5__STXD5,
+};
+
+static void mxc_init_audio(void)
+{
+        mxc_register_device(&imx_ssi_device0, NULL);
+        mxc_iomux_setup_multiple_pins(ssi_pins, ARRAY_SIZE(ssi_pins), "ssi");
+}
+
+/*!
+ * This structure defines static mappings for the i.MX31ADS board.
+ */
+static struct map_desc mx31ads_io_desc[] __initdata = {
+        {
+                .virtual        = MX31_CS4_BASE_ADDR_VIRT,
+                .pfn            = __phys_to_pfn(MX31_CS4_BASE_ADDR),
+                .length         = MX31_CS4_SIZE / 2,
+                .type           = MT_DEVICE
+        },
+};
+
+/*!
+ * Set up static virtual mappings.
+ */
+static void __init mx31ads_map_io(void)
+{
+        mx31_map_io();
+        iotable_init(mx31ads_io_desc, ARRAY_SIZE(mx31ads_io_desc));
+}
+
+static void __init mx31ads_init_irq(void)
+{
+        mx31_init_irq();
+        mx31ads_init_expio();
+}
+
+/*!
+ * Board specific initialization.
+ */
+static void __init mxc_board_init(void)
+{
+        mxc_init_extuart();
+        mxc_init_imx_uart();
+        mxc_init_i2c();
+        mxc_init_audio();
+}
+
+static void __init mx31ads_timer_init(void)
+{
+        mx31_clocks_init(26000000);
+}
+
+static struct sys_timer mx31ads_timer = {
+        .init   = mx31ads_timer_init,
+};
+
+/*
+ * The following uses standard kernel macros defined in arch.h in order to
+ * initialize __mach_desc_MX31ADS data structure.
+ */
+MACHINE_START(MX31ADS, "Freescale MX31ADS")
+        /* Maintainer: Freescale Semiconductor, Inc. */
+        .phys_io        = MX31_AIPS1_BASE_ADDR,
+        .io_pg_offst    = (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc,
+        .boot_params    = MX3x_PHYS_OFFSET + 0x100,
+        .map_io         = mx31ads_map_io,
+        .init_irq       = mx31ads_init_irq,
+        .init_machine   = mxc_board_init,
+        .timer          = &mx31ads_timer,
+MACHINE_END