1 files changed, 78 insertions, 0 deletions

diff --git a/arch/arm/mach-kirkwood/openrd_base-setup.c b/arch/arm/mach-kirkwood/openrd_base-setup.c
new file mode 100644
index 000000000000..3144bb875789
--- /dev/null
+++ b/arch/arm/mach-kirkwood/openrd_base-setup.c
@@ -0,0 +1,78 @@
+/*
+ * arch/arm/mach-kirkwood/openrd_base-setup.c
+ *
+ * Marvell OpenRD Base Board Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mv643xx_eth.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/kirkwood.h>
+#include <plat/mvsdio.h>
+#include "common.h"
+#include "mpp.h"
+
+static struct mtd_partition openrd_base_nand_parts[] = {
+        {
+                .name = "u-boot",
+                .offset = 0,
+                .size = SZ_1M
+        }, {
+                .name = "uImage",
+                .offset = MTDPART_OFS_NXTBLK,
+                .size = SZ_4M
+        }, {
+                .name = "root",
+                .offset = MTDPART_OFS_NXTBLK,
+                .size = MTDPART_SIZ_FULL
+        },
+};
+
+static struct mv643xx_eth_platform_data openrd_base_ge00_data = {
+        .phy_addr       = MV643XX_ETH_PHY_ADDR(8),
+};
+
+static struct mvsdio_platform_data openrd_base_mvsdio_data = {
+        .gpio_card_detect = 29, /* MPP29 used as SD card detect */
+};
+
+static unsigned int openrd_base_mpp_config[] __initdata = {
+        MPP29_GPIO,
+        0
+};
+
+static void __init openrd_base_init(void)
+{
+        /*
+         * Basic setup. Needs to be called early.
+         */
+        kirkwood_init();
+        kirkwood_mpp_conf(openrd_base_mpp_config);
+
+        kirkwood_uart0_init();
+        kirkwood_nand_init(ARRAY_AND_SIZE(openrd_base_nand_parts), 25);
+
+        kirkwood_ehci_init();
+
+        kirkwood_ge00_init(&openrd_base_ge00_data);
+        kirkwood_sdio_init(&openrd_base_mvsdio_data);
+}
+
+MACHINE_START(OPENRD_BASE, "Marvell OpenRD Base Board")
+        /* Maintainer: Dhaval Vasa <dhaval.vasa@einfochips.com> */
+        .phys_io        = KIRKWOOD_REGS_PHYS_BASE,
+        .io_pg_offst    = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
+        .boot_params    = 0x00000100,
+        .init_machine   = openrd_base_init,
+        .map_io         = kirkwood_map_io,
+        .init_irq       = kirkwood_init_irq,
+        .timer          = &kirkwood_timer,
+MACHINE_END